8/12/2019 Abhishek Ji
1/13
SUBMITTED TO :- DEEPAK SHARMA
SUBMITTED BY:- AKANSHANEEKHRA
AKANSHA SHRIVASTAV
ABHISHEK TRIPATHI
PPT ON BICONICAL ANTENNA
8/12/2019 Abhishek Ji
2/13
INTRODUCTION
FIGURE
FEATURES
CONSTRUCTION
THEORY
APPLICATION
ADVANTAGES AND DISADVANTAGES
BIBLOGRAPHY
CONTENTS
8/12/2019 Abhishek Ji
3/13
8/12/2019 Abhishek Ji
4/13
BICONICAL ANTENNA
8/12/2019 Abhishek Ji
5/13
BICONICAL ANTENNA
8/12/2019 Abhishek Ji
6/13
30 MHz to 100 MHz frequency range
2 Biconical elements
Tilt-angle and polarization are easily adjustable
High power balun handles up to 15 kW RF input power
Mounted on wheeled base for easy mobility
Wide beamwidth illuminates a large uniform area
FEATURES
8/12/2019 Abhishek Ji
7/13
CONSTRUCTION OF
BICONICAL ANTENNA A biconical antenna consists of an arrangement of two
conical conductors, which is driven by potential, charge, oran alternating magnetic field (and the associated alternatingelectric current) at the vertex. The conductors have acommon axis and vertex. The two cones face in oppositedirections.This example demonstrates biconical antenna analysis inEMC Studio. Frequency range: 20 MHz - 300 MHz. .
8/12/2019 Abhishek Ji
8/13
THEORY OF BICONICAL ANTENNA :-
In radio systems, a biconical antenna is a broad-bandwidth antenna madeof two roughly conical conductive objects, nearly touching at theirpoints. Biconical antennas are broadband dipole antennas, typicallyexhibiting a bandwidth of 3 octaves or more.
The conical conductors need not be solid cones nor infinitely long. Asimpleconical monopole antenna is a wire approximation of the solidbiconical antenna and has increased bandwidth (over a simple monopole). Acommon variant is the Discone antenna, where one of the cones is replacedwith a flat disk. A bowtie antenna is a wire approximation in two dimensionsof a biconic dipole antenna (used, for example, for UHF television reception).
8/12/2019 Abhishek Ji
9/13
APPLICATION:- Biconical antennas are used for emissions and immunity testing
to meet various EMC standards specified by FCC, CISPR andEN.
Biconical antenna is suitable for EMI, Certification tests as FCC,MIL-STD, VDE, TEMPEST, and also for immunity testing.
antennas are used for EMC site attenuation measurements forbetter accuracy.
8/12/2019 Abhishek Ji
10/13
FUTURE APPLICATION OF
ANTENNA :- Broadband RX-antenna for emission testing (20-300 MHz) TX-antenna for immunity testing, especially at low frequencies.
Measurements of shielding effectiveness.
Evaluation of test sites e.g. anechoic rooms (FAC) and open area test sites (OATS).
Passive field probe for immunity testing
8/12/2019 Abhishek Ji
11/13
ADVANTAGES Excellent azimuth pattern symmetry Low loss, high efficiency.
DISADVANTAGES
8/12/2019 Abhishek Ji
12/13
BIBLOGRAPHY REFERANCE BOOK:- K.D .PRASAD WIKIPEDIA AND INTERNET DEEPAK SIR
8/12/2019 Abhishek Ji
13/13
THANK YOU