Download - 55_Catalogue_KATALOG1_080910_14

Transcript
Page 1: 55_Catalogue_KATALOG1_080910_14

TAP

ES55

www.trans-marservices.com

tel.: +359 52 97 98 98, cell.: +359 895 46 46 00, fax: +359 52 50 17 47PA

CK

ING

SHEETS

55

Specifications

– St.st. 316, st.st.304 or carton steel

–Size1000mmx1000mm,1000mmx2000mm,1500mmх1500mm,

1500mm x 2000mm

– Thickness: 1.0mm - 4.0mm

– Color: black

–Others:Flexiblegraphitesheetswithmetalfoilandflexiblegraphite

sheets with wire mesh are also available

– Temperature -240+550°C

– Pressure up to 500 bar

Packing Item comes in wooden case

Application The item is used to make gaskets for vessels, boilers, piping,

pumps,valvesandflangesinpetrochemicalandminingindustries.

Flexible Graphite Sheet with Tanged Metal Reinforced

Specifications

– Usage: Item is used to make gaskets

– Temperature and working pressure: approx. 250°C; 15kgs/cm2

– Sizes: 1270mm x 3810mm, 1350mm x 1500mm, 1500mm x 2000mm,

1500mm x 4000mm

– Thickness: 0.4mm - 6.0mm

– Packing: in wooden cases

– Color: green

Non-Asbestos Rubber Sheet

Specifications

– Usage: Item is used to make gaskets

– Temperature and working pressure: approx. 350°C; 35kgs/cm2

– Sizes: 1270mm x 1270mm, 1270mm x 38100mm,

1300mm x 3810mm, 1500mm x 1500mm, 1500mm x 2000mm,

1500mm x 4100mm, 2700mm x 3810mm

– Thickness: 0.4mm - 6.0mm

– Color: red

Packing in wooden cases of about 100, 200, 500, and 1000 kgs net ea.

Application For water, vapour, air, gas, ammonia alkali and other mediums

transmitted in the joints of facilities and pipelines

Non-Asbestos Gasket Joint Sheet

Specifications

–Specificgravity:1.6g/cm3

– Tensile strength: 2.5Mpa

– Elongation: 150%

– Hardness: 70 (shore A)

–Ageingcoefficient:0.9

– Color: black

Performance middle pressure, strong tensile strength and

small distortion

Application seal gaskets, rings and light-duty conveyor

strap etc. requiring high tensile strength

Natural Terylene-Insertion Rubber Sheet

Specifications

– Water-proof, anti-shock and sealing

– Density: 1.6±0.05g/cm3

–Tensilestrength:≥3.0Mpa

–zvvExtensibility:≥250%

– Hardness: 70°±5° shore A

– Color: black

– Temperature and working pressure:

-15~70° environment and middle P

–Packing:innerplasticcoverfilm,outerwovenbag

Applicationallkindsofsealbufferwashers,rubbermats,

gaskets, and for ground pavement and decoration

Size: thickness: 1-60mm, width: 500-1500mm, length:

all lenghts available

Natural Rubber Sheet

MadefromKevlafibre,oilresistantsyntheticrubberandfillingmaterial;

which are compressed and calendered under high tº and pressure

into a sheet form. It is a good substitute for asbestos rubber sheet.

Oil Resistant Non-Asbestos Sheet

Specifications

– Water-proof, anti-shock, sealing, high oil-resistant (engine

oil, diesel oil, petrol, lubricating oil) and swelling-resistant

– Density: 1.5±0.05g/cm3

–Tensilestrength:≥3.5Mpa

–Extensibility:≥280%

– Hardness: 65°±5° shore A

– Temperature and working pressure: -20~85° environment

and middle P

– Size: thickness: 1-60mm, width: 500-1500mm, length:

all lenghts available

– Color: black

Packing innerplasticcoverfilm,outerwovenbag

Application allkindsofoil-resistantgaskets,fittingsand

washers, and for working table and ground pavement

Oil-Resistant Synthetic Rubber Sheet

Specifications

–Specificgravity:1.9g/cm3

– Tensile strength: 9Mpa

– Compression: 12±5%

– Resilient: 45%

–Ageingcoefficient:0.9

– Temperature and working

pressure: : 300C; 3.0Mpa

– Thickness: 0.4-5mm

– Color: Blue