55_Catalogue_KATALOG1_080910_14
description
Transcript of 55_Catalogue_KATALOG1_080910_14
TAP
ES55
www.trans-marservices.com
tel.: +359 52 97 98 98, cell.: +359 895 46 46 00, fax: +359 52 50 17 47PA
CK
ING
SHEETS
55
Specifications
– St.st. 316, st.st.304 or carton steel
–Size1000mmx1000mm,1000mmx2000mm,1500mmх1500mm,
1500mm x 2000mm
– Thickness: 1.0mm - 4.0mm
– Color: black
–Others:Flexiblegraphitesheetswithmetalfoilandflexiblegraphite
sheets with wire mesh are also available
– Temperature -240+550°C
– Pressure up to 500 bar
Packing Item comes in wooden case
Application The item is used to make gaskets for vessels, boilers, piping,
pumps,valvesandflangesinpetrochemicalandminingindustries.
Flexible Graphite Sheet with Tanged Metal Reinforced
Specifications
– Usage: Item is used to make gaskets
– Temperature and working pressure: approx. 250°C; 15kgs/cm2
– Sizes: 1270mm x 3810mm, 1350mm x 1500mm, 1500mm x 2000mm,
1500mm x 4000mm
– Thickness: 0.4mm - 6.0mm
– Packing: in wooden cases
– Color: green
Non-Asbestos Rubber Sheet
Specifications
– Usage: Item is used to make gaskets
– Temperature and working pressure: approx. 350°C; 35kgs/cm2
– Sizes: 1270mm x 1270mm, 1270mm x 38100mm,
1300mm x 3810mm, 1500mm x 1500mm, 1500mm x 2000mm,
1500mm x 4100mm, 2700mm x 3810mm
– Thickness: 0.4mm - 6.0mm
– Color: red
Packing in wooden cases of about 100, 200, 500, and 1000 kgs net ea.
Application For water, vapour, air, gas, ammonia alkali and other mediums
transmitted in the joints of facilities and pipelines
Non-Asbestos Gasket Joint Sheet
Specifications
–Specificgravity:1.6g/cm3
– Tensile strength: 2.5Mpa
– Elongation: 150%
– Hardness: 70 (shore A)
–Ageingcoefficient:0.9
– Color: black
Performance middle pressure, strong tensile strength and
small distortion
Application seal gaskets, rings and light-duty conveyor
strap etc. requiring high tensile strength
Natural Terylene-Insertion Rubber Sheet
Specifications
– Water-proof, anti-shock and sealing
– Density: 1.6±0.05g/cm3
–Tensilestrength:≥3.0Mpa
–zvvExtensibility:≥250%
– Hardness: 70°±5° shore A
– Color: black
– Temperature and working pressure:
-15~70° environment and middle P
–Packing:innerplasticcoverfilm,outerwovenbag
Applicationallkindsofsealbufferwashers,rubbermats,
gaskets, and for ground pavement and decoration
Size: thickness: 1-60mm, width: 500-1500mm, length:
all lenghts available
Natural Rubber Sheet
MadefromKevlafibre,oilresistantsyntheticrubberandfillingmaterial;
which are compressed and calendered under high tº and pressure
into a sheet form. It is a good substitute for asbestos rubber sheet.
Oil Resistant Non-Asbestos Sheet
Specifications
– Water-proof, anti-shock, sealing, high oil-resistant (engine
oil, diesel oil, petrol, lubricating oil) and swelling-resistant
– Density: 1.5±0.05g/cm3
–Tensilestrength:≥3.5Mpa
–Extensibility:≥280%
– Hardness: 65°±5° shore A
– Temperature and working pressure: -20~85° environment
and middle P
– Size: thickness: 1-60mm, width: 500-1500mm, length:
all lenghts available
– Color: black
Packing innerplasticcoverfilm,outerwovenbag
Application allkindsofoil-resistantgaskets,fittingsand
washers, and for working table and ground pavement
Oil-Resistant Synthetic Rubber Sheet
Specifications
–Specificgravity:1.9g/cm3
– Tensile strength: 9Mpa
– Compression: 12±5%
– Resilient: 45%
–Ageingcoefficient:0.9
– Temperature and working
pressure: : 300C; 3.0Mpa
– Thickness: 0.4-5mm
– Color: Blue