2021
SUBCONTRACTOR
PACKET
2
Table of Contents
❖ Instruction Letter 3
❖ Company Information Sheet 4
❖ Subcontractor Contract 5-6
o General Safety Rules 7-8
❖ DOT/OSHA Compliance Agreement 9
❖ Subtrucker Contract 10
❖ Workman’s Compensation and Independent Contractor 11
❖ Declaration of Independent Contractor Status Form Directions 12
❖ Declaration of Independent Contractor Status Form 13-14
❖ Declaration of Independent Contractor Status Form
*EXAMPLE* 15-16
❖ W-9 Form 17
4
Company Information Sheet
Company Name:
Owner Name:
Mailing Address:
Physical Address:
Phone Number:
Email Address:
Type of Service Provided:
For Subtruckers Only
Please list the quantity of each in your company fleet
Tandems: End Dump Trailers: Belly Dump Trailers:
Please list the Unit Number of each truck in your company fleet
Tandems:
Tractors:
3
February 15, 2021
Dear Subcontractor or Subtrucker,
Enclosed you will find the necessary paperwork that is required by law to be filled out. Please
pay close attention to the insurance requirements listed in the Subcontractor Contract, these have
not changed but I will be strictly enforcing these moving forward.
I will need the following information returned to this office:
1. Company Information Sheet
2. Subcontractor Contract
3. DOT/OSHA Compliance Agreement
4. Subtrucker Contract ** If Applicable**
5. W-9 Form
6. Workman’s Compensation or Declaration of Independent Contractor Status Form
7. General Liability Insurance
8. Automobile Liability Insurance
We have a notary in the Ewing office that is willing to notarize your forms for you.
The required documents can be returned by mail, fax, email or in person.
Mailing Address: PO Box 2303 Edwards, CO 81632
Physical Address: 502 Gilder Way Gypsum, CO 81637
Office Number: (970) 926-2770
Fax Number: (970) 926-4736
Email Address: [email protected]
Thank you for your cooperation; I know how time consuming and aggravating this can be.
Please call if you have any questions.
Sincerely,
Katie Jean Ewing
Ewing Trucking & Construction, LLC
5
2021 SUBCONTRACTOR CONTRACT
Ewing Trucking & Construction LLC requires that all work be performed in a responsible and
timely manner with special attention to safety and health of all personnel and the environment.
A safely performed job requires a high level of awareness and mutual cooperation on all parties
involved.
The subcontractor shall purchase and maintain the following Subcontractor’s Liability Insurance,
specifically the following minimum limits and coverage and provide the Contractor with a
current certificate of insurance evidencing coverage prior to entering the jobsite:
❖ Worker’s Compensation and Employer’s Liability:
• Employer’s Liability
▪ $100,000 – each accident
▪ $500,000 – Disease, policy limit
▪ $100,000 – Disease, each employee
• Individual, partners, or corporate officers, whichever is applicable must be
covered.
• If the subcontractor has no employees, an Independent Contractor Status form
must be complete by both Subcontractor and Contractor
❖ General Liability (Occurrence Form)
• Combined Bodily Injury and Property Damage
▪ $1,000,000 – each occurrence
▪ $2,000,000 – general aggregate
▪ $1,000,000 – products/completed operations aggregate
• Per Project Aggregate
• Contractor must be named as an additional insured on a primary/non-
contributory basis, including ongoing and completed operations, and must be
maintained for the statute of repose in Colorado of eight years
• A Waiver of Subrogation must be included
• Subcontractor’s General Liability policy must not contain an exclusion for work
on apartments
❖ Automobile Liability
• Combined Bodily Injury and Property Damage $1,000,000 – each accident
• Coverage of owned automobiles as well as non-owned and hired automobiles
• Contractor must be named as an Additional Insured
• A Waiver of Subrogation must be included
6
2021 SUBCONTRACTOR CONTRACT
As part of its contractual obligations, subcontractors and their employees are expected to abide
by all applicable safety rules. These rules are attached and cover the basic owner safety rules
and regulation (See Attachment A: General Safety Rules). Please become familiar with these
rules. A pre-work conference will be held (at a time and place to be announced) covering all the
safety items including our relevant Safety, Health and Environmental Rules, State and Local
rules, as well as MSHA and OSHA regulations that could apply to you. They do not contain
every rule necessary to do a job safely and correctly. Any failure of a subcontractor or truck
driver to abide by these rules and enforce these rules among their employees, either written or
verbally, constitutes cause for cancellation of their contract.
Every personal injury and non-injury damage accident is to be reported to the Ewing Trucking &
Construction LLC supervisor in charge of the project. This includes all “near miss” accidents.
These accidents and “near misses” will be investigated to find the cause and try to eliminate the
possibility of any future occurrences of the same type.
The law requires Ewing Trucking & Construction LLC to maintain a file of pertinent documents
on each subcontractor or truck driver. A list of required documents is given on page 3. Please
bring these documents to our Edwards office, or the Gypsum Shop and photocopies can be made
for you. Ewing Trucking & Construction LLC reserves the right to withhold payment until
these documents are received and the file is complete.
In signing this Subcontractor Agreement, I acknowledge and understand what is written herein. I
have read and understand what is required to purchase and maintain in all areas of insurance
coverage. I have read the “General Safety Rules” and understand the level of safety expected
from me and/or my company and employees. I sign this voluntarily as my own free act and
deed: no oral representations, statement, or inducements, apart from the foregoing written
agreement, have been made; I am at least eighteen (18) years of age and fully competent; and
execute this release for full, adequate and complete consideration fully intending to be bound by
same.
I further herby agree that I shall defend, indemnify and hold Ewing Trucking & Construction,
LLC, it’s officers, officials, employees, and volunteers harmless from any claims, injuries,
damages, loss, liability, and cost, including court costs and attorney fees, that they may incur due
to my participation in my agreed scope of work, whether caused by negligence of releases or
otherwise.
Signature Date
**Please Sign and Return**
7
Attachment A: General Safety Rules
General Safety Responsibilities
▪ Do NOT operate equipment without training. (Including mobile equipment- i.e. loaders,
dozers, excavators, forklifts, etc.).
▪ Wear seat belts while operating all vehicles equipped with seat belts.
▪ Erect barricades around excavations, open holes, pits, and trenches when left unattended.
▪ Report all injuries, suspected injuries, vehicle accidents, fires, chemical spills, and
property damage, to the supervisor, immediately.
▪ Report unsafe conditions to the supervisor.
▪ Wear Personal Protective Equipment (PPE) when required.
Hand Tools:
▪ Use tools for the specific job they are designed for.
▪ Inspect tools for damage and missing parts before every use.
▪ Use proper hoses and connections for the material being handled (steam, air, water,
anhydrous ammonia, etc.), ensure all hoses are in good working order.
▪ Never toss, drop, or throw a tool. Tools may be carried in hand or raised/lowered in a
bucket designed for that purpose.
▪ Sharp or pointed tools should not be carried in pockets of clothing.
▪ Cheater bars should not be used except in cases where it is absolutely necessary. If a
cheater bar must be used, place it on the largest wrench available (never use a cheater that
is more than twice the length of the wrench’s handle; the cheater bar shall cover the
wrench handle completely). Be prepared for a sudden release or failure of tool.
▪ Carry axes with your hand close to the head of the axe and the blade pointing down.
Avoid the use of double blade axes.
Power Tools:
▪ Do not operate rotating or reciprocating hand tools without guards in place.
▪ Long hair shall be properly secured or covered when operating any power tool.
▪ Do not operate power-actuated tools without training.
▪ Compressed air over 30 psi shall not be used to clear dust from clothing or for drying
hands.
▪ To avoid accidental start-ups, turn off tools before unplugging them, and make sure the
switch is off before plugging the cord in.
▪ Extension cords must be heavy-duty with proper ground wire (3-prong plug). Inspect
before use; do not use if insulation is damaged. Power tools must utilize a GFCI or low-
voltage transformer if used inside a conductive vessel, tank, or harvesting equipment.
▪ Remove any defective or unsafe tool from service. Inform the owner, supervisor, and
others using the tool, that it is broken and put tool where others will not use it.
Fire Prevention: All Employees MUST know!!!Know location and use of fire extinguishers.
Never smoke in areas marked “NO SMOKING” or “OPEN FLAME”.
8
▪ Use only approved containers and portable tanks for storage and handling of flammable
and combustible liquids.
▪ Dispose of any liquid leakage or spillage promptly and safely.
▪ Turn off the motor of any equipment being fueled.
Equipment:
▪ Only those qualified will be allowed to operate equipment or machinery.
▪ When equipment is parked, the parking brake shall be set.
▪ Seat belts shall be worn at all times when operating equipment.
Excavation:
▪ All excavations more than five (5) feet deep, in which employees are exposed to the
danger of moving ground, shall be guarded by a shoring system.
▪ Material shall be stored and retained at least two (2) feet from the edge of excavations
that may require entry by employees.
▪ When and employee is required to be in a trench four (4) feed deep or more, ladders or
other adequate means of exit shall be provided, within twenty-five (25) feet of lateral
travel.
▪ All OSHA Construction Standards for Excavation (29 CFR Part 1926.650- .652) will be
followed.
Equipment Guarding:
▪ All guards need to extend a distance sufficient to prevent any part of a person from
getting caught behind the guard. Approximately three (3) feet is usually adequate.
▪ Drive belts must have guards to contain backlash of broken belts, as this action could be
hazardous.
▪ All guards must be constructed in a manner that will allow them to withstand the
everyday vibrations, shock, and wear to which they will be subjected.
▪ Guards must be in place during all operation of machinery.
Traffic Control/Public Safety:
▪ All employees working on a site with public access will wear reflective safety vests.
▪ All crews shall be equipped with the adequate number or signs and cones to protect work
and insure safety to the public.
▪ When performing work in a high traffic area, equipment will not be operated without a
spotter for the equipment being operated.
▪ Equipment parked within ten (10) feet of roads or traveled areas must be protected by
reflective signs.
▪ Fencing, tape, signs, or cones shall barricade excavations, or any potential hazards caused
by construction.
9
2021 DOT/OSHA COMPLIANCE AGREEMENT
I, , do confirm that all equipment operated during the
2021 fiscal year meets or exceeds all relevant DOT and/or OSHA regulations and specifications.
I agree to assure all equipment will continue to be maintained with all current and future DOT
and/or OSHA regulations. I also confirm that I understand that OSHA regulation of construction
can be found in the Code of Federal Regulation, Title 29, Part 1926; I confirm I understand these
regulations and will adhere to them.
Signature Date
**Please Sign and Return**
10
2021 SubTrucker CONTRACT
I, , as owner/manager of
, understand that proper paperwork must be
turned in DAILY in order to be paid. I understand that Ewing Trucking & Construction, LLC
will provide daily truck tickets, which are to be filled out by myself or my driver(s) completely.
The date, job name, load ticket number, load weight and load time are to be provided. When
available, I will have the job foreman sign the truck tickets at the end of the day. I am
responsible for making sure a white/pink copy of all tickets are turned in DAILY, either at the
Ewing Shop or Ewing Office in Gypsum.
I understand that when called to a Ewing job, the work is to be perform by myself or my
employees. I understand that I am not allowed to subcontract any work to a third party unless
explicitly approved by an authorized representative of Ewing Trucking & Construction.
I understand that failure to turn in these tickets may delay or void payment of the missing load
tickets. If in the even that any ticket(s) are lost and not turned in, I understand I have until the 5th
of the month to find and turn in any ticket from the previous month.
Signature Date
**Please Sign and Return**
11
Worker’s Compensation and the Independent Contractor
Independent Contractor Form
Pinnacol Assurance Independent Contractor form must be completed before any work can
begin by the Sub or Contractor.
More than 60% of Colorado employers use Pinnacol Assurance. With that many employers using one
career they have developed certain rules about using Independent Contractors or Subs to complete
projects. If you hire a Sub to work at your site or to do work for you, you must request a Workers
Compensation Certificate of coverage from that Sub. If you hire an Independent Contractor you must
either have a Certificate of Insurance or have them complete the Independent Contractor form that
Pinnacol Assurance requires and must approve. Many employers do not understand that the Independent
Contractor must be approved by Pinnacol before work can begin. If they are not approved your company
will be liable for all Workers Compensation premiums related to that Independent Contractors income.
When completing the Independent Contractor form make sure the Independent and the employer’s
signatures are both notarized. In the Ewing office there is a notary that is willing to notarize your forms
for you. Once the form is completed it must be turned into your Workers Compensation underwriter and
returned before work begins.
Who is an Independent Contractor? A person providing services is an Independent Contractor if the employer does not have the right to
control them and they have their own business. The Workers Compensation Act sets out the following
criteria that must be met to show that the employer does not have the right to control the person providing
services:
• The individual is not required to work exclusively for the employer;
• The employer has not established a quality standard for the person providing services for plans
and specifications;
• The employer does not pay the service provider on an hourly basis or provide a salary instead of a
fixed or contract rate;
• The employer cannot terminate the individual performing services during the contract period
unless the service provider violates the terms of a contract or fails to produce a specifies result;
• The employer does not provide more than the minimal training;
• The employer does not provide tools or benefits to the service except for material and equipment;
• The employer does not dictate the time of performance except for a completion schedule and to
negotiate mutually agreeable hours;
• The employer does not pay the service provider personally, but instead makes payment to a trade
or business name;
If the employer combines their business with the person providing services, that person cannot be
considered an independent contractor. Independent contractors usually conduct business under a trade
name and may have profit or a loss in their business. They usually have their own offices, equipment and
materials and they hold themselves out to provide services to the public.
Page 1 of 3 ZAUCCIF007 03/17
This form is not valid unless a signed and notarized copy of the form is returned to Pinnacol Assurance.
Keep the original for your records and send a copy to Pinnacol. You can do this the following ways:
Email: [email protected]
Mail: Pinnacol Assurance
P.O. Box 469011
Denver, CO 80246-9011
Fax: 303.361.5000
Declaration of Independent Contractor Status Form
According to the Colorado Workers’ Compensation Act, a person is an independent contractor, not an employee, if
both of the following statements are true.
1. He/she is free from control and direction in the performance of the service (unless control is exercised under the
requirement of any state or federal statute or regulation).
2. He/she is customarily engaged in an independent trade, occupation, profession, or business related to the
services performed.
The Colorado Workers’ Compensation Act also outlines nine criteria (listed on page 2) to help determine whether or
not the above statements are true. For an individual to be considered an independent contractor, he/she must meet
only those criteria that are appropriate to the situation. He/she does not need to meet all of the nine criteria.
This Declaration of Independent Contractor Status Form documents the business relationship as defined in the
Colorado Workers’ Compensation Act. It is the responsibility of our policyholders and their independent contractor(s)
to correctly and truthfully complete this form. Pinnacol Assurance will accept this form only when it is initialed where
applicable, signed, and notarized by both parties. If you do not understand this form, do not sign it.
If you have any questions, please contact a member of Pinnacol’s customer service team at 303.361.4000 or
800.873.7242.
Please make copies of this form as needed. You should complete this form only once for each independent
contractor for the lifetime of your Pinnacol policy or until the business relationship changes.
Page 2 of 3 ZAUCCIF007 03/17
Declaration of Independent Contractor Status Form
We certify UNDER PENALTY OF PERJURY that (insert contractor’s name and trade name below):
Name: __________________________________________ Trade name: _________________________________
Performing (type of work): _______________________________________________________________________
Federal Employer Identification #: ________________________________________________________________
Address: ____________________________________________________________________________________
Phone: ______________________________________________________________________________________
Is an independent contractor (IC) and is not an employee of the following policyholder (PH):
Policyholder’s name: ___________________________________________________________________________
Address: ____________________________________________________________________________________
Policy #:_________________________________________ Phone: ______________________________________
We also certify, by OUR initials WHERE APPLICABLE, that the above business for which the above individual
performs services meet the following criteria:
IC PH. 1. The business DOES NOT require the individual to work ONLY for the business for whom services
are performed (except that the individual may DECIDE to work only for the business for a definite
period);
IC PH. 2. The business DOES NOT establish a quality standard for the individual (except that the business
may provide plans and specifications regarding work but cannot oversee the actual work or instruct
the individual as to how work will be performed);
IC PH. 3. The business DOES NOT pay the individual a salary or an hourly rate instead of a fixed or contract
rate;
IC PH. 4. The business DOES NOT terminate the work or the service provided during the contract period
unless the individual violates the terms of the contract or fails to produce a result that meets the
specifications of the contract;
IC PH. 5. The business DOES NOT provide more than minimal training for the individual;
IC PH. 6. The business DOES NOT provide tools or benefits to the individual (except that materials and
equipment may be supplied);
IC PH. 7. The business DOES NOT dictate the time of performance (except that a completion schedule and a
range of agreeable work hours may be established);
IC PH. 8. The business DOES NOT pay the individual personally instead of making payment or checks payable
to the trade or business name of the individual;
IC PH. 9. The business DOES NOT combine the business operations in any way with the individual’s business
operations instead of maintaining all such operations separately and distinctly.
Do not forget to complete page 3 of this form, which contains the Certification by the Independent
Contractor. This certification must be signed and notarized.
Top Related