7/30/2019 06082008161513@Fault_Finder_PCI
1/2
FaultFinder PCIThe Fault Diagnostics System for board repair
Turn your PC into an effective PCB Fault Finding
system with FaultFinder PCI
The workshop diagnostic solution:
Fully Automatic Guided Probe
Auto Learn
Easy to use graphical software
Built in Libraries with Symbols
Impendence signature analysis test
Effective PCB trouble shooting system
Proven method of finding both digital and analogue faults
7/30/2019 06082008161513@Fault_Finder_PCI
2/2
FaultFinder PCI
Finding faults fast, when nothing else matters, FaultFinder PCI guides you to the exact
point of failure. Utilising power off test techniques and performing impedance analysis,
FaultFinder PCI provides a completely safe method of test for newly manufactured
or in-service boards.
Featuring Auto Learn, test programs are generated in minutes. Simply select the node
to be tested and FaultFinder PCI automatically selects the best ranges, from an
extensive combination, storing the signature for comparison or as part of a test
program to use in future.
For even greater fault coverage the FaultFinder Scanner Box increases the number
of test points that can be tested up to a maximum of 192 nodes. Incorporating an
extensive built-in library, FaultFinder PCI and FaultFinder Scanner Box make
programming large boards simple and with minimal effort, letting you concentrateon repairing the board.
All test programs can be shared between FaultFinder PCI and the FaultFinder
Portable for maximum flexibility.
DiagnoSYS Head Office
DiagnoSYS Limited, Systems House,
Bedford Road, Hampshire GU32 3QH
T: +44 (0) 1730 237420 F: +44 (0) 1730 260659
E: [email protected] W: www.diagnosys.com
Globalised Support and Sales Offices
France DiagnoSYS SA, Paris +33 (0) 160 176777
Germany +49 (0) 896 1524 616
Sweden +46 (0) 150 101 53
India DiagnoSYS Electronics Pvt Ltd, New Delhi, Bangalore
Specification
2 VI Channels plus CommonPCI card
Voltage Ranges
Default Ranges: 1, 5, 10, 15, 20 & 25 Volts
Voltage ranges are user adjustable in software
with a resolution of 0.1 Volt
Frequency Ranges: 5, 15, 25, 50, 150, 300, 750, 1500 & 3000 Hz
Current Ranges: 16 Resistors selectable across all Voltage and Frequency Ranges.
Current limited to less than 200 mA peak
Resistor values: 10R, 20R, 50R, 100R, 200R, 500R, 1K, 2K, 5K, 10K, 20K, 50K,
100K, 54R, 1K21 & 26K7
Waveforms: Sine, Square, Triangle & Ramp
5 Hz to 6 KHz, 0.1 Hz resolution
0.2 Volt to 25 Volt Peak, 0.1 Volt resolution
256 Point, 8 bit Comparison architecture
2 Pulse Channels plus Common
Pulse mode: Used for Gate fired devices.
Programmable Mark/Space ratio
Programmable voltage 5 Volts
Optional Scanner Unit
Increases the capacity of FaultFinder PCI from 2 to 96
or 192 test channels