7/30/2019 06082008161513@Fault_Finder_PCI

1/2

FaultFinder PCIThe Fault Diagnostics System for board repair

Turn your PC into an effective PCB Fault Finding

system with FaultFinder PCI

The workshop diagnostic solution:

Fully Automatic Guided Probe

Auto Learn

Easy to use graphical software

Built in Libraries with Symbols

Impendence signature analysis test

Effective PCB trouble shooting system

Proven method of finding both digital and analogue faults

7/30/2019 06082008161513@Fault_Finder_PCI

2/2

FaultFinder PCI

Finding faults fast, when nothing else matters, FaultFinder PCI guides you to the exact

point of failure. Utilising power off test techniques and performing impedance analysis,

FaultFinder PCI provides a completely safe method of test for newly manufactured

or in-service boards.

Featuring Auto Learn, test programs are generated in minutes. Simply select the node

to be tested and FaultFinder PCI automatically selects the best ranges, from an

extensive combination, storing the signature for comparison or as part of a test

program to use in future.

For even greater fault coverage the FaultFinder Scanner Box increases the number

of test points that can be tested up to a maximum of 192 nodes. Incorporating an

extensive built-in library, FaultFinder PCI and FaultFinder Scanner Box make

programming large boards simple and with minimal effort, letting you concentrateon repairing the board.

All test programs can be shared between FaultFinder PCI and the FaultFinder

Portable for maximum flexibility.

DiagnoSYS Head Office

DiagnoSYS Limited, Systems House,

Bedford Road, Hampshire GU32 3QH

T: +44 (0) 1730 237420 F: +44 (0) 1730 260659

E: info@diagnosys.com W: www.diagnosys.com

Globalised Support and Sales Offices

France DiagnoSYS SA, Paris +33 (0) 160 176777

Germany +49 (0) 896 1524 616

Sweden +46 (0) 150 101 53

India DiagnoSYS Electronics Pvt Ltd, New Delhi, Bangalore

Specification

2 VI Channels plus CommonPCI card

Voltage Ranges

Default Ranges: 1, 5, 10, 15, 20 & 25 Volts

Voltage ranges are user adjustable in software

with a resolution of 0.1 Volt

Frequency Ranges: 5, 15, 25, 50, 150, 300, 750, 1500 & 3000 Hz

Current Ranges: 16 Resistors selectable across all Voltage and Frequency Ranges.

Current limited to less than 200 mA peak

Resistor values: 10R, 20R, 50R, 100R, 200R, 500R, 1K, 2K, 5K, 10K, 20K, 50K,

100K, 54R, 1K21 & 26K7

Waveforms: Sine, Square, Triangle & Ramp

5 Hz to 6 KHz, 0.1 Hz resolution

0.2 Volt to 25 Volt Peak, 0.1 Volt resolution

256 Point, 8 bit Comparison architecture

2 Pulse Channels plus Common

Pulse mode: Used for Gate fired devices.

Programmable Mark/Space ratio

Programmable voltage 5 Volts

Optional Scanner Unit

Increases the capacity of FaultFinder PCI from 2 to 96

or 192 test channels