Zip product guide 2013

2013 Product GuideBoiling water, Chilled water, Sparkling water,

Hot water, Filtration, Accessories

Zip Heaters (UK) Ltd. Bertie Ward Way, Dereham, Norfolk NR19 1TE

London Office: Clover House, 147-149 Farringdon Road, Clerkenwell, London EC1R 3HN

Telephone: 0845 6 005 005(Charged at local rate)

Fax: 01362 692448

[email protected]@zipheaters.co.uk

[email protected]

www.zipheaters.co.uk

Zip HydroTapAt Work - At Home

Zip Wall MountedInstant Boiling Water

Zip Chilled WaterFloor StandingUndersink

Wall Mounted

Zip Hot WaterInstantaneousUnventedOpen Outlet

TrainingZip’s experienced team ofTraining Managers offer bespokeproduct training geared to theneeds of Installers, Specifiersand Facility Managers.

These ‘hands on’ sessions typically take place on site, or in one ofZip’s specially designed training centres, covering all relevant productinstallation, servicing and maintenance issues.

Additionally a choice of RIBA accredited CPD programmes areavailable for those involved in the specification of boiling, chilled orhot water products.

Prompt serviceZip HydroTap is better designed, better built and better backed thanany comparable boiling and chilled filtered water system, and isdesigned to give many years of service. However, like any kitchensystem, it may need attention from time to time to keep it in topoperating condition. To provide prompt service in any location, Ziphas established a team of national, fully trained, directly employed,service engineers covering the whole of the UK – for installation,repairs or routine periodic maintenance.

2 3

Introduction

Thank you for considering a Zip product, whichever one you choose,you can be quite certain of one thing:Nobody offers you a more advanced boiling or chilled water systemfor your project, because nobody knows instant boiling water like Zip.We also lead the way in the UK development of instantaneous hotwater products.

Today millions of people around the world use Zip instant boilingwater systems each day in homes, public buildings, hospitals,schools, offices and factories in more than sixty countries.

Zip remains world leader in instant boiling water, setting the pacein time-saving, energy-saving, water-conserving and user-safetytechnology.

You can be confident that the Zip product you choose today is asound investment, because it is by far the best of its kind, designedto save you time, energy and money every day, for many years tocome.

IndexNEW PRODUCTS 4

Drinking Water - Boiling

HydroTap 6-7HydroTap technology and efficiency 8-9HydroTap overview – commercial 10-11Sparkling, boiling & chilled 12-13Boiling and chilled 14-15Boiling 16-17Chilled 18-193-in-1 & 4-in-1 20-21All-in-One 22-23Industrial 24-25For the Home (including HydroTap and HydroTap Miniboil) 26-29Optional extras 30-31Filtration 32-33Wall Mounted instant boiling water – overview 34-35Hydroboil Plus 36-37Hydroboil 38-39Econoboil 40-41Duo 42-43Accessories 44-45

Drinking water - Chilled 46-47

HydroTap chilled 48-49ChillTap & ChillTap Extra 50-51Chilltap 52-53Chillmaster 54-55Wall Fountain 56-57Chill Fountain 58-59Chilled water for the home 60-63Accessories 64-65

Hot water 66-67

InLine instantaneous 68-69ES 70-73CEX 74-75DEX/DBX 76-77Flow and temperature rise charts 78Accessories 79Aquapoint III unvented 5 –15 litres 80-81Varipoint II unvented 10 &15 litres 82-83Unvented accessories 84-85Aquapoint III unvented 30 –100 litres 86-87Varipoint II unvented 30 –100 litres 88-89AquaFlo 90-93Tudor 94-95Contract 96-97RCH 98-99

General Data 100-101

4 5

NEW for 2013

Zip HydroTap Sparklingfor the workplace and for the home

See pages 12-13

Zip ChillTap & ChillTap Extrafor the workplace

See pages 50-51

Zip InLine ES

See pages 70-73

Zip InLine DEX12

See pages 76-77

Zip 0.2-micron filtration

See pages 32-33

Drinkingwater

6

Zip HydroTap brings into one system, all of the practical advantagesof instant boiled, chilled and now SPARKLING filtered water tocommercial environments such as offices, factories and hospitals, aswell as in the home.

Zip HydroTap®

Changing the way the world boils water

Press the red lever for boiling filteredwater or the red lever and the safetybutton* at the same time (if youneed the safety interlock activated).The lever action tap gives yousimple fingertip control for filling acup or mug to just the right levelwithout splashing or waste.

Press the blue lever for chilledfiltered water. The lever action tapgives you simple fingertip controlfor filling a glass, jug, carafe orbottle to just the right level withoutsplashing or waste.

Choose a Zip HydroTap SPARKLINGmodel and you can simply depressboth levers for sparkling chilledfiltered water, instantly. Great todrink on its own, great as a mixer.

Avoid steam exposure to your handswhen filling pots with boiling water.Flick up the red lever and boilingwater runs ‘hands free’ continuouslyfor any pre-set period of 5 to 15seconds.

Instant boiling, chilled andnow SPARKLING filteredwater from a single tap.

A touch of the red lever providesinstant filtered boiling water,whilst the blue lever deliversfresh tasting filtered chilledwater. Touching both red andblue levers at the same timedelivers exciting sparkling water.

Features and benefits

Programmable energy savingmodes for added efficiency.

Programmable maximummeasured water delivery.

Safety interlock provides userwith added protection whereneeded.

System unit hidden under thecounter.

Filter change warning light.

No more time wasted waiting fora kettle to boil.

No more energy wasted boilingkettles or urns.

No more bottled water to buy.

No more bottled water to store.

No more bottled water to handle.

No more running out of drinkingwater during periods of highdemand, such as hot weather.

Features the most technicallyadvanced 0.2 micron filtrationsystem for healthier, bettertasting drinking water.

Option of anti-scale filter.

Installation at the sink or onoptional font and drain.

Drinkingwater

7

Drinkingwater

8Drinkingwater

9

Zip HydroTap® technologySuperior technology saves energy andconserves water

Zip HydroTap® efficiencyTypical energy efficiency information—commercial models

Power-Pulse™ energy saving technology

Reduces power consumption by allowing the systemto regulate its power during periods of high and lowusage. This saves energy whilst maintaining the tightestpossible temperature control.

Cuts energy consumption

Running costs: no more than 15p per day (with sleepmode active 10 hours in 24), plus boiling water 8 cupsfor 1p; chilled water 20 glasses for 1p.

Sleeps when inactive

The system can be pre-set to power down after 2 hoursof non-use, but will still retain stored ‘boiling’ water atan energy saving 64°C, or can also be set to hibernate(power off completely). The system quickly recovers tothe pre-set boiling temperature upon further draw-off.

Programmable 24/7 timer

Pre-set the ‘power on’ and ‘power off’ times(once a day) for those periods when the Zip HydroTapwill not be used, such as overnight or at weekends(for commercial users).

N.B. To calculate a total running cost figure, add the cost per dayto the number of cups of boiling water consumed, multiplied bythe cost (at 8 cups for 1p) and the number of glasses of chilledwater consumed, multiplied by the cost (at 20 glasses for 1p).

Methodology:

• Typical results of test carried out for Zip and independentlyverified by The University of New South Wales, Australia

• Assumed typical business day; 12 hours operational mode,12 hours sleep mode, 10 minutes full recovery mode

• Operational mode is the default setting; with the main systemusing sufficient power to maintain set temperature in the tanks

• Sleep mode—system powers down if not used for two hours,using only enough energy to maintain ‘boiling’ water at 64°C

• Test conditions—boiling water at 98°C and chilled water atbetween 5°C and 10°C

• The CO2 emission estimates are based on 430 kg of CO2 per1000 kWh of electrical power consumed

• The estimated cost per day is based on £0.10 per kWh

Typical 24-Hour Business Day

Model Power Usage CO2 Emission Cost per day(Watt hours) (kg) (£)

BC200/175+ 1,481 0.637 0.15

BC160/125+ 1,357 0.584 0.13

For each cup of boiling water or glass of chilled water

Model Power Usage CO2 Emission Cost(Watt hours) (kg) (£)

Boiling cups 13.0 0.006 0.0013

Chilled glasses 6.0 0.003 0.0006

Plus

Drinkingwater

10Drinkingwater

11

Zip HydroTap® rangeGeneral Information—CommercialHydroTap

Zip HydroTap® rangeThe wide range of products available

Tap headChrome plated, die cast tapbody with push and pull levers.Intergral safety lock and LEDindicators.

Disabled optionOversize tap levers.

Control panelLocated on undercounter unit forprogramming sleep mode, timer,water temperature and waterdelivery.

Filtration systemIntegral triple-action 0.2 micronencapsulated cartridge.(See page 32)

Safety featuresChild-proof interlock on tap.Undercounter safe tray with leakdetector.

FinishesAvailable in Bright Chrome(standard), Satin Chrome, BlackChrome and Gold Plated.

ApprovalsWRAS, approved or pending.CE endorsed.

Warranty1 year on site parts and labour.For full details visit:www.zipheaters.co.uk/warranty

PlumbingThe water supply must bepotable (drinkable).

If static pressure exceeds 7 bar,a pressure reducing valve mustbe fitted.

An isolating valve should beinstalled between the watersupply and the unit.

VentingThe cupboard housing the unitmust be amply ventilated anddoors offset all round withsupplied vent and buffers fitted

ElectricalTo be wired to a double poleswitched fused spur with aminimum break capacity of 13 amp.

Installation must comply withcurrent IEE regulations.

3 metre power cable provided.

CautionIn some hard water areaswhere scale is an issue werecommend the fitting of oneof the Zip Professional range ofscale filtration systems.(See page 33).

Boiling & chilledBoiling, chilled & sparkling

Chilled only

For the Home

Boiling only

4-in-1 & 3-in-1 All-in-One

IndustrialHydroTap sink mounted

Allow 35mm hole forfixing to surface or sink

HydroTap font mountedAllow 35mm hole for tapand 108mm for font(template supplied)

Drinkingwater

DrinkingwaterZip HydroTap® NEW

Now with SPARKLING chilled filteredwater as well as boiling and chilledfiltered water - instantly!Features & benefits

Simple to operate, and withmore safety features than ever

• Press red lever for boiling water,however, if safety interlock isactivated, press red lever andsafety button at the same time.

• Press the blue lever to fill aglass, jug or bottle with chilledfiltered water.

• Press both red and blue leverstogether for sparkling chilledfiltered water.

• Lift either lever to run water forany pre-set period of 5 to 15seconds.

• Boiling water can be isolated,if needed, during periods yourHydroTap is unattended.

Smarter technology cuts powerconsumption dramatically

• Power-Pulse™ controls powerphasing to cut power costs.

• Set sleep mode to lower boilingwater temperature to 64°C after2 hours of non-use, or set tohibernate (power off completely).

• Set 24/7 on/off weekly timer tosave energy when HydroTap isnot in use.

Choice optionsFor small locations, chooseBCS120/125+ (single unit).

For medium locations chooseBCSS160/125+ (split system).

For large locations chooseBCSS200/125+ (split system).

Boiling systemOpen outlet, vented; designed tooperate at 98°C.

Chilling systemFan-cooled condenser type.

RefrigerantR134A.

Temperature settingsThe boiling temperature can beadjusted from 99°C to 68°C.Factory set at 98°C.

N.B. For general installation andspecification details of theHydroTap range see page 10.

12 13

Product Maximum Maximum Power DimensionsCode Boiling Chilled Sparkling Rating W x D x H

cups/hour glasses/hour kW @ 230V (mm)

BCS120/125+ 120 125 2.3 385 x 412 x 348

BCSS160/125+ (Split model)Boiling Unit 280 x 323 x 337Chilled Unit 160 125 2.14 353 x 248 x 366

BCSS200/125+ (Split model)Boiling Unit 308 x 344 x 393Chilled Unit 200 125 2.64 353 x 248 x 366

‘+’ signifies models are free flow, ensuring cold filtered water continues when ‘chilledglasses/hour’ is exceeded during periods of high demand.

Drinkingwater

DrinkingwaterZip HydroTap®

Boiling and chilled filtered water

Features & benefits• Provides boiling and chilledfiltered water instantly from asingle tap.

• Saves time with staff waitingfor a kettle to boil.

• No unsightly and unsafe kettleleads.

• More environmentally friendlythan a kettle.

• Provides more choice ofbeverage than a vendingmachine.

• No need for expensive andenvironmentally damagingbottled water.

• No need to store and handlebottled water.

• No fear of running out ofdrinking water in extremeweather conditions.

• Can be sited at a sink oraway from it on the optionalfont and drain.

Choice optionsFor small locations, chooseBC120/60+ (Compact).

For medium locations chooseBC160/125+.

For high demand large locationschoose BC200/175+.

‘+’ signifies models are ‘freeflow’,ensuring cold water continues toflow when ‘chilled glasses perhour’ is exceeded during periodsof high demand. This model alsohas a higher rated boiling waterfacility.



RefrigerantR134A.

Temperature settingsThe boiling water temperaturecan be adjusted from 99°C to68°C. Factory set at 98°C.


14 15

Product Maximum Maximum Power DimensionsCode Boiling Chilled Rating W x D x H


BC120/60+ 120 60 2.2 385 x 380 x 348

BC160/125+ 160 125 2.3 440 x 430 x 337

BC200/175+ 200 175 2.8 500 x 465 x 395


Drinkingwater

Drinkingwater

16 17

Zip HydroTap®

Filtered boiling water

Features and benefits• Provides boiling filtered waterinstantly.

• Saves time with staff waitingfor a kettle to boil.

• No unsightly and unsafe kettleleads.

• More environmentally friendlythan a kettle.

• Provides more choice ofbeverage than a vendingmachine.

• Can be sited at a sink or awayfrom it on the optional font anddrain.

Choice optionsFor small and medium sizedlocations choose B160F.

For large locations choose B200F.


Temperature settingsThe boiling water temperature canbe adjusted from 99°C to 68°C.Factory set at 98°C.




B160F 160 – 2.1 280 x 323 x 337

B200F 200 – 2.6 310 x 340 x 393

Drinkingwater

18Drinkingwater

19

Zip HydroTap®

Filtered chilled water

Features and benefits• Provides chilled filteredwater instantly.





Choice optionsFor small to medium sizedlocations choose C125+.


RefrigerantR134A.

Temperature settingsThe chilled water temperature isfactory set to deliver water atbetween 5°C to 10°C.

N.B. For general installationand specification details of theHydroTap range see page 10.



C125+ – 125 0.2 306 x 457 x 334

Drinkingwater

Drinkingwater

20 21

Features & benefitsOffers all of the advantages of astandard HydroTap plus theseadditional 4 benefits.

• Provides hot water at 50°Cto the mixer tap (supplied)and either boiling and chilled(4-in-1) or boiling (3-in-1) tothe HydroTap.

• Saves the cost of a separatehot water supply.

• Saves space.

• Conserves energy.

Choice options3-in-1For small to medium sized locationschoose BH160F.

For large locations choose BH200F.

4-in-1For small to medium sized locationschoose BCH160/125+.

For large locations chooseBCH200/175+.

‘+’ signifies models are ‘free-flow’,ensuring cold water continues toflow when ‘chilled glasses perhour’ is exceeded during periodsof high demand. This model alsohas a higher rated boiling waterfacility.

Boiling systemOpen outlet, vented; designedto operate at 98°C.


RefrigerantR134A.

Temperature settingsThe boiling water temperature canbe adjusted from 99°C to 68°C.Factory set at 98°C.

Mixer FlowThe mixer tap will deliver up to3ltr/min, ideal for rinsing cups andhandwashing.

Mixer TapsThe mixer tap is available in threetypes:


Zip HydroTap® 3-in-1 & 4-in-1Boiling and chilled filtered drinking waterPLUS hot, cold (ambient) or mixedwarm water – all from a single source

4-in-1 provides filtered boiling and chilled water delivered throughthe HydroTap PLUS hot and cold (ambient) through the mixer tap.

3-in-1 provides filtered boiling water delivered through theHydroTap PLUS hot and cold (ambient) through the mixer tap.



3-in-1

BH160F 160 - 2.1 280 x 323 x 337

BH200F 200 - 2.6 310 x 340 x 393

4-in-1

BCH160/125+ 160 125 2.3 440 x 430 x 337

BCH200/175+ 200 175 2.8 500 x 465 x 395

To choose the tap style select:BH and BCH for the Standard tapBHT and BCHT for the Tall tapBHS and BCHS for the Square tap

Standard

Tall

Square

Drinkingwater

22Drinkingwater

23

Zip HydroTap® All-in-One(Commercial)Boiling and chilled filtered drinking waterPLUS hot, cold (ambient) or mixedwarm water – all from one tapFeatures & benefitsOffers all of the advantages of astandard HydroTap plus theseadditional 4 benefits.

• Replaces mixer taps todeclutter and simplify kitchendesign.

• Vented systems save space,cost and energy by eliminatingthe need for a separate hotwater supply.

• Separate drinking watercontrols for convenience andsafety.

• Vented and non-ventedsystems available.

Choice options

Non-vented systems(Uses an existing hot watersupply to feed mixed hot waterto the All-in-One Tap).

For small to medium locationschoose BC160/125+A.

For large locations chooseBC200/175+A.

Vented systems(Uses incoming cold watersupply heated in the HydroTapsystem to provide mixed hotwater to the All-in-One Tap).

For small to medium sizedlocations chooseBC160/125+AV.

For large locations chooseBC200/175+AV.

‘+’ signifies models are‘freeflow’, ensuring cold watercontinues to flow when ‘chilledglasses per hour’ is exceededduring periods of high demand.This model also has a higherrated boiling water facility.

Hot water systemMixes boiling and chilled waterto approximately 50°C.

Tap headLong reach spout swings 120°.

Optional mixer leverFor areas with a restrictedamount of room for the standard90mm handle to operateeffectively, such as behind thesink and close to the wall orsplashback, an optionalshortened lever (SP92354) isavailable (as shown below).



BC160/125+AV 160 125 2.3 440 x 430 x 337

BC200/175+AV 200 175 2.8 500 x 465 x 395

BC160/125+A 160 125 2.3 440 x 430 x 337

BC200/175+A 200 175 2.8 500 x 465 x 395


‘A’ signifies non-vented models where the system uses an existing hot water feed to themixed hot water to the All-in-One tap.

‘AV’ signifies vented models where the system uses incoming cold water and heats itusing the HydroTap boiling process to provide mixed hot water to the All-in-One tap.

Drinkingwater

Drinkingwater

24 25

Zip HydroTap® in IndustryHeavy duty designs for industrialenvironments and institutions

Features & benefitsOffers all of the advantages of astandard HydroTap plus theseadditional benefits.

• Super strong tapered shankanchor (side touch models).

• Damage-resistant side or toptouch buttons.

• Simple 2-button without safetylock.

• Optional 3-button with safetylock.

• Can be installed R/H or L/H.

• Up to 200 boiling cups perhour.

• Up to 175 chilled glasses perhour.

• Features ‘Free-Flow’, ensuringcold filtered water continuesto be available even when‘chilled glasses per hour’capacity is exceeded.

• Side touch variant (primarilyfor institutional use) has a highstrength tapered base whichfastens to an undersink clampblock with a reinforcing spine.

Choice options

Top-Touch modelsFor heavy duty small to mediumsized locations chooseBC160/125+IT.

For heavy duty large locationschoose BC200/175+IT.

Side-Touch modelsFor heavy duty small to mediumsized locations where additionalsecurity is needed chooseBC160/125+IS.

For heavy duty large locationswhere additional security isneeded choose BC200/175+IS.

Tap HeadChrome Plated.


Product Model Max Max Power DimensionsCode Type Boiling Chilled Rating W x D x H

cups/ glasses/ kW @ (mm)hour hour 230V

BC160/125+IT Boiling/Chilled160 125 2.3 440 x 430 x 337with top-touch tap

BC200/175+IT Boiling/Chilled200 175 2.8 500 x 465 x 395with top-touch tap

BC160/125+IS Boiling/Chilled160 125 2.3 440 x 430 x 337with side-touch tap

BC200/175+IS Boiling/Chilled200 175 2.8 500 x 465 x 395with side-touch tap


Drinkingwater

27

Zip HydroTap® for the HomeInstant boiling and chilled filtered watersystems for home kitchens, large andsmall, traditional or contemporary.Now available with Sparkling option.Features and benefits• No more waiting for water toboil.

• No more bottled water to buy.

• Easy to use.

• 0.2 micron filtration for greattasting healthy water.

• Scale management filteroption.

• Can be sited next to sink or onoptional font and drain.

• Both the boiling and chilledwater systems are pumped forcorrect water temperaturedelivery plus no wasted water.

• Highly energy efficient.

• Child safety interlock.

• Tap levers can be ‘locked’ forfilling of large vessels.

• Measured dispense whenlevers are in upright position.

• Power-pulse energy savingtechnology.

• Sleep mode to save power.

• Integral 24/7 timer.

Models available• Boiling, chilled and sparklingfiltered water.

• Boiling and chilled filteredwater.

• Boiling and chilled filteredwater from separate units.

• Boiling and cold (ambient)filtered water.

• Boiling water.

• Chilled filter water.

• All-in-One model with boiling,chilled, hot and cold waterfrom one tap.

• 4-in-1, providing boiling andchilled water, hot and coldwater to separate mixer tap(provided).

Mixer TapsThe mixer tap is available inthree types. (See page 20).

Product Model Boiling Chilled Total UndersinkCode Type Chamber Chamber Rating W x D x H

(litres) (litres) kW (mm)

DOMBCS Boiling, Chilled & Sparkling 2.0 1.5 1.64 385 x 412 x 348

DOMBC3 Boiling & Chilled 2.0 1.5 1.8 385 x 380 x 348

DOMBC2 Boiling & Chilled split 1.8 1.8 1.7280 x 323 x 337353 x 253 x 377

DOMBA1 Boiling & Ambient 1.8 – 1.5 280 x 323 x 337

DOMHB1 Boiling only 1.8 – 1.5 280 x 250 x 337

DOMC1 Chilled only – 1.8 0.2 306 x 457 x 334

DOMBC3A All-in-One 1.8 1.8 1.8 385 x 380 x 348

DOMBCH 4-in-1 3.0 3.0 2.3 430 x 430 x 337

Drinkingwater

26

Drinkingwater

29

Zip HydroTap®

Miniboil Classic & EliteSuper compact economy models forfiltered boiling and filtered cold(ambient) water for the homeD

rinkingwater

28

Models available• Boiling and cold (ambient)filtered water with Classic tap.

• Boiling and cold (ambient)filtered water with Elite tap.

Features and benefits• No more waiting for water toboil.

• Easy to use touch pads.

• 0.2 micron filtration for greattasting healthy water.

• Scale management filter option.

• Can be sited next to sink or onoptional font and drain.

• Inactivity sleep mode.

• Filter change indicator.

• Cool-touch tap.

• Compact size makes it idealfor kitchens with limited space.

• Highly energy efficient.

• Safety interlock.

• Power-Pulse™ technology.

FiltrationSupplied with external tripleaction sub-micron filter.Additional anti-scale filtrationoption.

Warranty12 months on site parts andlabour warranty. These productsare specifically designed for usein domestic environments. Use ofthem in commercial applicationsmay invalidate the warranty.

N.B. For further details see ZipBrochure ‘Zip HydroTap at Home’or visit: www.zipheaters.co.uk

Product Model Boiling Total UndersinkCode Type Chamber Rating W x D x H

(litres) kW (mm)

Boiling & ColdMB1BA Classic Tap 1.8 1.5 212 x 272 x 338

Boiling & ColdMB2BA Elite Tap 1.8 1.5 212 x 272 x 338

Tap mounted on fontAllow 35mm hole for tapfixing and 108mm for font

(template supplied)

Tap mounted on sinkAllow 35mm hole for tapfixing to surface or sink

Zip Miniboil Elite

Zip Miniboil Classic Miniboil shown font mounted.

Drinkingwater

Drinkingwater

30 31

Zip HydroTap®OptionsFinishes and practical solutions

Font and Drain*Zip HydroTap can be orderedwith a matching font anddrain for mounting remotelyfrom the sink.

Order Codes:ZT004 – Bright ChromeZT104 – Satin ChromeZT105 – Black ChromeZT106 – Gold PlatedZT008 – For Mininboil Elite

*Not for use with All-in-One.

FinishesTraditional ZipHydroTap andfonts are availablein standard Brightchrome and a choiceof three additionalfinishes.

Not available forSparkling, Industrialor All-in-One, 3-in-1and 4-in-1models.

Over sized leversAll HydroTap models,except for models in theAll-in-One, Industrial andMiniboil ranges, can befitted with oversize leversto assist those withrestricted dexterity.

Order Codes:Add ‘D’ to normal order code

Braille coversTo aid those with sight issuesBraille covers can be fitted tothese levers.

Order Codes:SP99910 - Boiling/chilledSP99911 – Boiling onlySP99912 – Chilled only

Drainless FontFor locations where there isno available drainage, theZip “Drainless Font” systemensures the safe andeffective collection of wastewater from a HydroTap font.

Order Code:ZT006

Black ChromeAdd ‘B’ to normalcode when ordering.

Satin ChromeAdd ‘S’ to normalcode when ordering.

Gold PlatedAdd ‘G’ to normalcode when ordering.

Drinkingwater

Drinkingwater

32 33

Zip HydroTap®Filtration NEWAll HydroTap products NOW feature.02 micron filtration

New Zip 0.2 micron filtersreduce chlorine taste and odourand filter out particles more thanone fifth of a micron in size –that’s one five-thousandth(1/5000th) of a millimetre –twenty five times finer thancommonly used 5.0 micronfilters, designed to filter out bothCryptosporidium and Giardiacysts and other impurities, for

crystal-clear great-tasting waterand healthier drinking.

This is arguably the mostadvanced and most practicalwater filtration system availableanywhere today, developed tomeet our exacting specificationsby the world leader in waterfilter technology.

Zip 0.2 micron filtercartridgesare incorporated into the ZipHydroTap installation under thesink, or out of sight within theZip HydroTap control cabinetinstalled beneath the tap.

Zip 0.2 micron filtercartridgesare hygienically encased forfast and easy filter cartridgereplacements. Cartridges arereplaced every 12 months, orearlier if a high level of waterusage makes it necessary.

Zip HydroTap‘filter change light’flashes when a filter change isdue. It can be set to measureboth water volume and thenumber of days in service,signalling whichever occurs first.

UK Scale Map

N.B. Check with local water authority for accurate data

Scale ManagementRecommended for use when thewater hardness level is above 4degrees Clark (60 parts permillion CaCO3).

• Triple action filtration

• Ion exchange resin toreduce water hardness

• Carbon block to improvetaste and odour

• High efficiency filtration toremove particulates

• Choice of four filters to suitvarious applications

• Can be installed horizontally ifrequired using optionalbracket

Choice of four filters:

• FL1100 with submicronfiltration for domestic use.

• FL2300 with one micronfiltration for light commercial use.

• FL3600 with one micronfiltration for normalcommercial use.

• FL6000 PLUS with onemicron filtration for heavycommercial use.

• For initial installation each filterhas a dedicated installationkit, which includes thehead, all necessary pushfit components.

The Order Codes are:FL1100 KITFL2300 KITFL3600 KITFL6000 PLUS KIT

Zip Professional RangeHigh performance limescalefiltration system for use withZip HydroTap

Hard tovery hard

Mediumhardness

Soft

Drinkingwater

35

Saves timeNo more time wasted waiting forwater to boil—Zip delivers boilingwater instantly, at the touch of atap.

Saves energyNo energy is wasted boilingmore water than needed—fingertip control gives a cup fullor teapot full at a time.

Saves spaceNo cluttered worktops—Zipinstant boiling water eliminatesthe need for kettles and exposedpower leads.

Saves moneyCosts little to run—thanks toenergy-efficient design andelectronic controls (HydroboilPlus) to minimise powerconsumption.

Sets a new standardEvery working day in the UK overeight million cups of tea andcoffee are made using Zip instantboiling water systems.

Temperature controlZip’s patented high precisiontemperature control systems aredesigned to keep the boilingwater within one degree of theset temperature. This means thatboiling water and only boilingwater is delivered.

RangesZip offers a choice of threeranges:

Hydroboil PlusThermostatically controlled,twin chamber technology withstainless steel boiling tank.

Premium insulation and cooltouch two way tap with safetylock.

Energy saving Power-Pulse™

Sleep mode - after 2 hours of nodemand or when lights turned off.

Integral 24 hour 7 day timer.

Available in sizes from 3.0 to40.0 litres.

White or stainless steel finishes.

HydroboilThermostatically controlled,twin chamber technology withstainless steel boiling tank.

Premium insulation and chromecatering style tap.

Available in sizes from 1.5 to40.0 litres.

White or stainless steel finishes.

EconoboilThermostatically controlled, twinchamber technology with copperboiling tank.

Tontine insulation.

Chrome catering style tap.

Available in 3.0 & 5.0 litres.

White finish.

34

Drinkingwater Overview

Wall mounted instant boiling waterZip Hydroboil PlusZip Hydroboil®

Zip Econoboil

Instant boiling water heaters are essential appliances for theworkplace and are available in the widest range of models andcapacities.

Patented twin chambertechnology – uses steamto pre-heat incomingwater

Patented Steam-Heat-Boost system

Patented Teflonmetering tuberegulates waterflow & temperature

Moulded hightemperature insulationminimises boiling waterheat loss

Zip Hydroboil Plus cuts energyconsumption in 5 ways

Steam-Heat-Boost SystemSteam from boiling water is recycled to pre-heat incomingcold water. A patented metering tube maintains the storedwater within 1°C of set temperature.

Power-Pulse™ energy saving technologyApplies full power only during heavy usage periods cuttingback to micro-pulse power during light usage or whenunused — not available on 40 litre model.

Inactivity sleep modeAfter 2 hours of non-use Hydroboil Plus enters sleep mode,allowing the water temperature to reduce to 65° at which itis maintained until next draw-off.

Low light sleep modeWhen activated, an integral light detector activates thisfacility when room light is switched off and the unit enterssleep mode as above.

Integral 24 hour 7 day timerSwitches system off during known periods of inactivity,returning to full functionality ahead of next expecteddemand.

Drinkingwater

Drinkingwater

36 37

Zip Hydroboil PlusWall mounted instant boiling water3, 5, 7.5, 10, 15, 25, 40 litre

Heating elementLong-life incoloy sheathedembedded rod type.Dry start protection.

Boiling chamberTwin chamber-stainless steel.Steam-Heat-Boost technology.Crevice-free stainless steel withremovable access ports, top andbottom.

InsulationCompressed high temperatureinsulation panels on sizes below10 litres, engineered for easyboiling chamber access. Highefficiency aluminium backedmineral wool insulation on othersizes.

ThermostatThermistor controlled.

CaseStainless steel or corrosion-resistant, white enamelled steel.

Temperature SettingsOn installation, to suit user needs,the boiling water temperature canbe adjusted from 100˚C to 68˚C.

Control PanelLiquid Crystal Display shows time,day, heater operation and energysaving mode status. If used withan in-line filter, a filter changereminder can be programmed.

TapUnique two-way cool touch tap.

Safety featuresIntegral safety lock.

ApprovalsWRAS, CE endorsed.

WarrantyTwo-year on site parts andlabour. For full details of the ZipWarranty visit:www.zipheaters.co.uk/warranty

InstallationInstall over a draining board, orwork top fitted with a drip tray.Tap spout should be no higherthan necessary to fill large pots.Minimum tap height abovedraining board for on-wallmaintenance is 200mm.

PlumbingDesigned for direct connectionto a potable cold water supplywith a minimum pressure of 1bar. If pressure exceeds 7 bar apressure limiting valve must befitted. An isolating valve shouldbe installed between the watersupply and the heater.

Concealed plumbingConnect inlet and vent pipes fromthe rear via 15mm capillary elbows.

Exposed plumbingConnect inlet and vent pipesfrom below directly to 15mmcompression fittings.

VentingThe vent must discharge to asafe visible position using atundish.

ElectricalTo be wired to a double polefused spur with a minimum breakcapacity of 13 amps. Installationmust comply with current IEEregulations.

CautionIn some hard water areas wherescale is an issue we recommendthe fitting of the Zip Inline filter.

Energy ConservationThe installer can select one of two programmable energy

saving modes –

• Integral 24 hour 7 day timer enables the unit to switch offautomatically during known periods of inactivity e.g. overnight or atweekends, returning to full functionality ahead of the next expecteddemand.

Sleep Modes

• Inactivity Sleep Mode. Following a period of 2 hours non-useHydroboil Plus automatically enters sleep mode when the unit powersdown allowing the water temperature to gradually reduce to 65˚C, atwhich it is maintained. Upon further draw off boiling resumes.

and/or

• Low light Sleep Mode. An integral light detector automaticallyactivates sleep mode (as above) when room lights are switched off,returning to normal operation when the next draw off occurs or thelighting is switched back on.

Zip Hydroboil Plus with cool touch tap and energy saving features

Product Code Capacity Delivery Recovery Rating DimensionsCase Finish litres cups*at any cups* kW W x D x H

s/steel white one time per hour (@ 230V) (mm)

HP103 HP003 3.0 18 100 1.5 289 x 180 x 431

HP105 HP005 5.0 30 140 2.4 318 x 198 x 465

HP107 HP007 7.5 45 140 2.4 318 x 198 x 578

HP110 HP010 10.0 60 180 3.0 390 x 244 x 600

HP115 HP015 15.0 90 180 3.0 390 x 299 x 600

HP125 HP025 25.0 150 180 3.0 390 x 299 x 780

HP140 HP040 40.0 240 360 2 x 3.0 515 x 284 x 840

*Standard cup size 167ml

Drinkingwater

38Drinkingwater

39

Zip Hydroboil®

Wall mounted instant boiling water1.5, 3, 5, 7.5, 10, 15, 25, 40 litre

Heating elementLong-life incoloy sheathedembedded rod type. Dry startprotection.

Boiling chamberTwin chamber-stainless steel.Steam-Heat-Boost technology.Crevice-free stainless steel withremovable access ports, topand bottom.

InsulationCompressed high temperatureinsulation panels on sizes below10 litres, engineered for easyboiling chamber access. Highefficiency aluminium backedmineral wool insulation on othersizes.

ThermostatCapillary type.

CaseStainless steel or corrosionresistant white enamelled steel.

TapTwo way, chrome-plated classic,catering style.


WarrantyTwo-year on site parts andlabour. For full details of the ZipWarranty visit:www.zipheaters.co.uk/warranty

InstallationInstall over a draining board, orwork top fitted with a drip tray.Tap spout should be no higherthan is necessary to fill largepots. Minimum tap height abovedraining board for on-wallmaintenance is 200mm.

PlumbingDesigned for connection to apotable cold water supply witha minimum pressure of 1 bar.If pressure exceeds 7 bar apressure limiting valve must befitted. An isolating valve shouldbe installed between the mainssupply and the system.

Concealed plumbingConnect inlet and vent pipes fromthe rear via 15mm capillaryelbows.

Exposed plumbingConnect inlet and vent pipesfrom below directly to 15mmcompression fittings.

VentingThe vent must discharge to asafe and visible position usinga tundish.

ElectricalTo be wired to a double polefused spur, minimum breakcapacity of 13 amps.Installation must comply withcurrent IEE regulations.

CautionIn some hard water areas wherescale is an issue we recommendthe fitting of the Zip Inline filter.

Zip Hydroboil®with Classic tap

Product Code Capacity Delivery Recovery Rating DimensionsCase Finish litres cups*at any cups* kW W x D x H


– HS001 1.5 9 100 1.5 289 x 180 x 335

– HS003 3.0 18 100 1.5 289 x 180 x 431

HS105 HS005 5.0 30 140 2.4 318 x 198 x 465

HS107 HS007 7.5 45 140 2.4 318 x 198 x 578

HS110 HS010 10.0 60 180 3.0 390 x 244 x 600

HS115 HS015 15.0 90 180 3.0 390 x 299 x 600

HS125 HS025 25.0 150 180 3.0 390 x 299 x 780

HS140 HS040 40.0 240 360 2 x 3.0 515 x 284 x 840

*Standard cup size 167ml

Drinkingwater

Drinkingwater

40 41

Zip Econoboil®

Wall mounted instant boiling water3 & 5 litre

Heating elementEmbedded rod type.Boiling chamberTwin chamber in copper.Steam-Heat-Boost technology.InsulationAluminium backed Tontine.ThermostatCapillary type.CaseCorrosion resistant whiteenamelled steel.TapTwo way, chrome-plated classic,catering style.ApprovalsWRAS, CE endorsed.WarrantyOne-year on site parts andlabour. For full details of the ZipWarranty visit:www.zipheaters.co.uk/warrantyInstallationInstall over a draining board, orwork top fitted with a drip tray.Tap spout should be no higherthan is necessary to fill largepots. Minimum tap height abovedraining board for on-wallmaintenance is 200mm.PlumbingDesigned for connection to apotable cold water supply witha minimum pressure of 1 bar.

If pressure exceeds 7 bar apressure limiting valve must befitted. An isolating valve shouldbe installed between the mainssupply and the system.Concealed plumbingConnect inlet and vent pipesfrom the rear via 15mm capillaryelbows.Exposed plumbingConnect inlet and vent pipesfrom below directly to 15mmcompression fittings.VentingThe vent must discharge to asafe and visible position using atundish.ElectricalTo be wired to a double polefused spur, minimum breakcapacity of 13 amps.Installation must comply withcurrent IEE regulations.CautionIn some hard water areas wherescale is an issue we recommendthe fitting of the Zip Inline filter.

Zip EconoboilThe low cost boiling water solution for locations where economy is of the essence.

Product Code Capacity Delivery Recovery Rating DimensionsCase finish litres cups*at any cups* kW W x D x H


– HS503 3.0 18 100 1.5 289 x 180 x 431

– HS505 5.0 30 140 2.4 318 x 198 x 465

*Standard cup size 167ml.

Drinkingwater

43

Drinkingwater Zip Duo®

Boiling and chilled filtered waterOn-wall fixing or counter-mounted on stand provided

Delivery rateUp to 100 cups of boiling and 35glasses of chilled water at a time.Recovery rateUp to 217 boiling cups/hour.90 chilled glasses/hour.

CaseStainless steel or corrosion-resistant, white enamelled steel.

TapsTwo way, classic style cateringtaps.

FiltrationIntegral 0.2 micron filtration.

Control panelFor programming sleep mode,timer and water temperature.

RefrigerantR134A.

ApprovalsCE endorsed.

WarrantyOne-year on site parts andlabour. For full details of theZip Warranty Scheme visit:www.zipindustries.co.uk/warranty

Temperature SettingsOn installation, to suit userneeds, the boiling watertemperature can be adjustedfrom 99˚ to 68˚C.

LocationThe unit should be positionedeither on a suitable load bearing

wall capable of supporting42kg - 5 litre, 64kg - 15 litre oron the counter mounting standsupplied. The unit must have aminimum 150mm clearance onthe left, 50mm on the right and150mm on top.

Minimum tap height, if wallmounted should be 200mmabove work surface. The ventmust discharge to a safe andvisible place.


If static pressure exceeds 7 bar,a pressure reducing valve mustbe fitted. An isolating valveshould be installed between thewater supply and the unit.

ElectricalTo be wired to a double poleswitched fused spur with aminimum break capacity of 13amps (3.5kW 15 amp).Installation must comply withcurrent IEE regulations.

HD215 & HD315 should beprovided with their owndedicated supply.

CautionIn some hard water areas wherescale is an issue we recommendthe fitting of the Zip ProfessionalRange of High Performance ScaleFilters (see page 33).

42

Energy ConservationA choice of two programmable energy saving modes –

• Integral 24 hour 7 day timer to enable the boiling and chilledunits to switch automatically off during known periods of inactivitye.g. overnight or weekends but return to full functionality ahead ofthe next expected demand.

• Inactivity sleep mode enables the boiling water unit to powerdown automatically following a period of 2 hours non-use. Thisallows the water temperature to gradually reduce to 65˚C, atwhich it is maintained. Upon further draw off boiling resumes.

Zip Duo

Product Code Delivery Recovery Weight Rating DimensionsCase finish at any one time Cups Glasses kg full kW @ W x D x H

S/Steel White Cups Glasses per hr per hr 230V (mm)

HD105 HD005 30 35 120 90 42 2.0 650 x 280 x 430

HD115 HD015 100 35 140 90 64 2.3 700 x 350 x 580

HD315 HD215 100 35 217 90 64 3.5 700 x 350 x 580

Standard cup 167ml. Standard glass 200ml.

Cup DispensersZE001 Stainless steel.ZE002 White plastic.

Counter StandsZE004 For HS001.ZE006 For HS003.ZE007 For HS005, HS105,

HP005, HP105.ZE008 For HS007, HS107,

HP007, HP107.

TundishZD100 Wall mounted chromed

tundish.ZD101 Sink mounted chromed

tundish.

Universal Mounting BracketWhen a Zip Hydroboil replaces aHeatrae Sadia, Calomax or Instantaproduct this bracket may be used tosecure the Hydroboil using existingfixings.

ZP001 3 and 5 litre.ZP002 7.5 litre.

Zip Water BlockRecommended to be fitted in the watersupply line to all Zip products (exceptHydroTap) to minimise the potentialdamage in the event of leakage.

HE45004

Accessories

45

Zip AccessoriesBoiling water

Zip AccessoriesBoiling water

Accessories

44

Hydroboil Extra Tap Kits(tap extension pipework)ZC100 For 10, 15 and 25 litre

heaters, up to 2 taps(excludes taps).

SP90502 Tap for above.

Inline FiltersFL064 6” filter for taste and

odour removal with scalereduction. For use withHydroboil up to 7.5 litre.

FL104 10” filter for taste andodour removal with scalereduction. For use withHydroboil 10 litre andabove.

Mug RacksZE010 Stainless steel

(for Classic Tapmodels only).

ZE011 Stainless steel(for Hydroboil Plusmodels only).

Drip TraysZD001 Stainless steel (with drain).ZD002 Stainless steel (no drain).

Drip TrayDimensions

OverviewChilled, filtered water

Drinkingwater

Drinkingwater

Zip’s mains fed chillers are designed for the work placeenvironment to provide fresh filtered drinking water.


Provides drinking water at a fraction of the cost of bottled water.

• No more bottled water to buy.

• No more bottled water to store.

• No more bottled water to handle.

• No more environmental issues associated with bottled water.

• No more running out of drinking water during periods of highdemand such as hot weather.

• Now feature the most technically advanced 0.2 micron filtrationsystem for healthier, better tasting drinking water.

46 47

Zip HydroTapZip ChilltapZip ChillmasterZip Chill FountainZip Wall FountainZip Chilltower

Good hydration at workWater is a vital nutrient for life.Everybody wants to be healthyat work and a healthierworkforce leads to improvedefficiency.Even mild levels of dehydrationadversely affect both physicaland mental performance.There is currently no agreementon how much water we shoulddrink each day but estimatesrange from 1.2 to 3 litres per day.The need for consumption at thetop of these estimates wouldapply to those working in hot ordusty environments or wherethere is a need to wear protectiveclothing.

Access to drinking waterThe law requires that employersprovide an adequate supply ofwholesome drinking water for allpersons in the workplace. Thismust be readily available atsuitable places.Drinking water should not besited where contamination islikely such as toilet or washroomfacilities.More information is available fromthe Health and Safety Executiveby visiting: www.hse.gov.ukSource: www.water.org.uk

Drinkingwater

Drinkingwater

48 49

Zip HydroTap®

Filtered chilled water system

Features and benefits• Provides chilled filteredwater instantly.





• Free-Flow™ facility ensuringcold filtered water continuesto be available even when‘chilled glasses per hour’capacity is exceeded duringperiods of high demand.

Choice optionsFor small to medium sizedlocations choose C125+.


RefrigerantR134A.

Temperature settingsThe chilled water temperature isfactory set to deliver water atbetween 5°C to 10°C.

N.B. For general installationand specification details of theHydroTap range see page 10.

Energy ConservationProgrammable operation

• Integral 24 hour 7 day timer enables the chilled water unit to switchoff automatically during known periods of inactivity e.g. overnight orweekends, but return to full functionality ahead of the next expecteddemand.



C125+ – 125 0.2 306 x 457 x 334

Standard glass 200ml.

’+’ signifies model is free-flow, ensuring cold filtered water continues when ‘glasses/hr’is exceeded during periods of high demand

Drinkingwater

50

Product Maximum Power DimensionsCode Chilled Rating W x D x H

glasses/hour (kW) (mm)

CT1/140 140 0.45 353 x 291 x 385

CT2/140 140 0.45 353 x 291 x 385

CS125+ 125 0.2 353 x 248 x 369

Drinkingwater

51

Zip ChillTap® & ChillTap® Extra NEWCommercial

Features and benefits• Stylish tap.

• Fingertip control for filling glasses.

• Hands-free filling for large jugs and bottles.

• Superior 0.2 micron filtration.

• Filter change every 12 months.

• 140 glasses per hour.

Zip ChillTapCT1/140Chilled filtered water instantly.

Shown on optional font—ZT004.

Zip ChillTap ExtraCT2/140Chilled filtered water instantlyand cold (ambient) filtered water.


Zip ChillTap SparklingCS125+Chilled or sparkling filtered waterinstantly.


Drinkingwater

52

Product Product DimensionsCode Type W x D x H

(mm)

CH103 Zip Chilltap, undersink 355 x 290 x 385

Drinkingwater

53

Zip Chilltap®

Under-sink chillerFiltered drinking water

sink


Great tasting freshly filteredcool drinking water for fittingon a sink.

Filters out dirt, rust and otherparticles contaminatingdrinking water.

Reduces chlorine and otheroffensive water treatmentchemicals.

Delivers up to 140 glassesper hour.

Submicron filtration.

Storage capacityNominal 8 glasses.

Output capacityUp to 140 glasses per hourat <10˚C.

Rating0.3 kW @ 230V AC.

Chiller typeFan cooled condenser witha compressor rated at up to0.25 hp.

Refrigerant typeNon-toxic R134A.

Under-sink caseCorrosion resistant whiteenamelled steel.

Sink mounted tapChrome plated brass with leveraction tap and swivel head.

Filtration0.2 micron fully encapsulatedexternally mounted doubleaction carbon filter.


WarrantyOne-year on site parts andlabour. For full details of theZip Warranty Scheme visit:www.zipheaters.co.uk/warranty

InstallationThe tap should be:

Positioned to the rear of a sink.

Mounted on a flat surface.

Mounted at 45 degrees to theedge of the sink so it drains intothe sink when running.

The under-sink chiller must be:

Located as closely as possibleto, and directly beneath the tap.

Installed with clearances of50mm left, right and above, with65mm to rear.

Filter should be mounted wherereadily accessible on the chilleror on the adjacent cupboardwall.

PlumbingWater connections 15mm push-fit.

If water pressure is above 7 bar apressure reducing valve (AQ3)should be used (see page 84).

ElectricalTo be wired to a double poleswitched fused spur with aminimum break capacity of 13amps. Installation must complywith current IEE regulations.

Drinkingwater

55


(mm)

CH101 Zip Chillmaster, floor standing 350 x 350 x 915

CH102 Zip Chillmaster, wall mounted 350 x 350 x 530


Great tasting freshly filtered cooldrinking water for high usageand public access areas.

Heavy duty, easy-to-cleanstainless steel bowl and stainlesssteel case.

Filter change reminder lightsignals when filter cartridgereplacement is due.

Filter cartridges are quick andsimple to change.



Output capacity140 glasses per hour at <10ºC.Rating0.3 kW @ 230V.

Chiller typeFan cooled condenser with acompressor rated at 0.25 hp.Carafe fillerChrome plated brass leveraction tap with swivel head.

Optional TapsBubbler or Push Button(see page 64).

Refrigerant typeR134A.

CaseBrushed finish stainless steelwith front access panel.

Filtration0.2 micron filtration.

Drain connection 38mm or43mm diameter.


BREEAM complianceThe Zip Chillmaster is fullyBREEAM compliant whenfitted with ZG500 fitting kit(see page 65).


InstallationWater, drainage and powershould all be available nearby.

The chiller should be mountedon a level surface (levelling feetare provided).

The chiller must be installed withclearances of 50 mm left, rightand 65mm at rear (except onwall mounted).

The optional kit ZG500, givesBREEAM compliance by ensuringservices are protected fromvandalism and the chiller securelyfixed to the wall and floor.

Wall mounted Chillmastersupplied with 1⁄2” masonryanchors for use on solid walls only.




Drinkingwater

54

Zip Chillmaster®

Floor standing andwall mounted chillerFiltered drinking water

Illustrated with afitted BREEAM kit

Drinkingwater

57

Drinkingwater

56

Zip Wall Fountain®

Recessed chillerFiltered drinking water


Recessed chiller ideal forproviding chilled filtered waterwhere space is at a premium.

Perfect for installing in busycorridors.



Output capacityRated at 140 glasses per hourat <10ºC.

Rating0.3 kW @ 230V.

Chiller typeFan cooled condensor witha compressor rated at 0.25 hp.


ConfigurationEquipped with carafe fillerand bubbler.

CaseBrushed finish stainless steelwith lockable front access panel.

FiltrationComplete with 0.2 micron fullyencapsulated double actioncarbon filter.


BREEAM complianceThe Zip Wall Fountain is fullyBREEAM compliant wheninstalled as per fittinginstructions.


InstallationThe chiller should be recessedinto a wall where it is easy forusers to access.

Water, drainage and powershould all be available nearby.

Integral, removable drip tray canbe plumbed into waste if required.




AvailabilityAllow 12 week lead time.


(mm)

CH104 Zip Wall Fountain, recessed 635 x 303 x 1670

Drinkingwater

59

Drinkingwater

58

303mm

385mm

Double bowl width

Single bowl width

Product Product type DimensionsCode Single bowl W x D x H

(mm)

CH105 Zip Chill Fountain (adult) 500 x 410 x 1140

CH145 Zip Chill Fountain (child) 500 x 410 x 1140

CH115 Zip Chill Fountain (wheelchair) 500 x 490 x 1140

Product Product type DimensionsCode Double bowl W x D x H

(mm)

CH155 Zip Chill Fountain (adult/adult) 1005 x 410 x 1140

CH165 Zip Chill Fountain (child/child) 1005 x 410 x 1140

CH135 Zip Chill Fountain (wheelchair/wheelchair) 1005 x 490 x 1140

CH125 Zip Chill Fountain (adult/child) 1005 x 410 x 1140

CH175 Zip Chill Fountain (adult/wheelchair) 1005 x 490 x 1140

CH185 Zip Chill Fountain (child/wheelchair) 1005 x 490 x 1140

Zip Chill Fountain®

Wall mounted chillerFiltered drinking water


The perfect heavy dutysolution for public areas whereconfigurations for adults,children or wheelchair accessmay be necessary.

Bump action electronic controlsfor wheelchair usage andlockable front panels.

Heavy duty, easy-to-cleanstainless steel bowls andstainless steel case.

Can be configured for adult,child or wheelchair usage.



Output capacityRated at 140 glasses per hourat <10ºC.



Chiller typeFan cooled condensor witha compressor rated at 0.25 hp.

ConfigurationCan be configured for adult,child or wheelchair use or anycombination of these.

CaseBrushed finish stainless steelcase with lockable frontaccess panel.

FiltrationComplete with submicron fullyencapsulated double actioncarbon filter.


BREEAM complianceThe Zip Chill Fountain is fullyBREEAM compliant wheninstalled as per fittinginstructions.


InstallationThe chiller should be wallmounted where it is easy forusers to access.

Water, drainage and powershould all be available nearby.

Integral, removable drip tray canbe plumbed into waste if required.




AvailabilityAllow 12 week lead time.

Drinkingwater

61

Drinkingwater

60

Delivery rateUp to 18 glasses of chilled waterat a time.

Rating0.3 kW @ 230V AC.


RefrigerantR134A.

Tap headChrome plated, die cast tapbody with push and pull leversfor electronically controlled waterdelivery, integral LED indicators.

Disabled 0ptionOversize lever taps.

Under counter unitHouses chilled and filtrationsystems. Corrosion resistantwhite enamelled steel case, withfront access door.

Control panelLocated on under counter unit tocontrol timer and water delivery.

Filtration systemIntegral triple-action, 0.2 micron,encapsulated cartridge.

Safety featuresUndercounter safe tray with leakdetector.



InstallationThe tap should be positionedeither on a suitable sink or on aZip Tap Font. If installing on asink, the tap should be mountedso that it will dispense into thesink.

The undersink unit should belocated if possible directlybeneath the tap and not morethan 1 metre away. It must beinstalled with clearances of50mm left and right and 65mmat rear.


If static pressure exceeds 7 bar,a pressure reducing valve mustbe fitted. An isolating valve shouldbe installed between the watersupply and the under-bench unit.


VentingThe cupboard containing thechilling unit must be amplyventilated: cupboard doors mustbe offset all round for ventilation,using buffers provided and thevent fitted (supplied).


Energy ConservationProgrammable operation

• Integral 24 hour 7 day timer enables the chilled water unit to switchoff automatically during known periods of inactivity e.g. overnight orweekends but return to full functionality ahead of the next expecteddemand.

Zip HydroTapChilled water for the Home


cups/hour glasses/hour* kW @ 230V (mm)

DOMC1 – 125 0.3 305 x 455 x 340

*Standard glass 200ml.

Tap mounted on sinkAllow 35mm hole for tapfixing to surface or sink.

Tap mounted on fontAllow 35mm hole for tapfixing and 108mm for font(template supplied).

Drinkingwater

62Drinkingwater

63

Chilled WaterFor the Home


• Fingertip control for filling glasses.

• Hands-free filling for large jugs and bottles.

• Superior 0.2 micron water filter.

• Filter change every 12 months.

Product Zip Sparkling Chilled Cold Chilled Total Under-sinkCode Model Water Water Water Glasses/ Rating Dimensions

Hour* kW W x D x H(mm)

DOMCTS ChillTap ✔ ✔ – 60 0.245 354 x 248 x 369Sparkling

DOMCT1 ChillTap ✔ ✔ 60 0.245 353 x 253 x 377Extra –

DOMCT2 ChillTap – ✔ – 60 0.245 353 x 253 x 377

DOMFT1 Filter Tap – – ✔ – – –

ZT004 Optional font and drain for all above

*Standard glass 200ml.

Zip ChillTap Sparkling NEW

• Chilled filtered water, instantly.

• Plus chilled filtered sparklingwater, instantly.

Zip ChillTap Extra


• Plus filtered cold (ambient)water.

Zip ChillTap


Zip Filter Tap

• Filtered cold (ambient) water.

Zip Font and Drain

• Allows siting away from the sink.

• For connection to waste.

Drinkingwater

64Drinkingwater

65

Chilled waterAccessories

Chilled waterAccessories

ZE001

Stainless steel dispenserfor disposable cups.

ZI001

Optional drinking bubbler.

ZD003

Waste water dish for installationwhere drainage is not available.

ZI002 NEW

Optional Tap for Chillmasterwith push button dispense.

BREEAM(BRE EnvironmentalAssessment Method)sets the standard for bestpractice in sustainabledesign and has becomethe de facto measureused to describe abuilding’s environmentalperformance.

The BREEAM Health andWell Being credit HEA16(drinking water) requireschillers to be installed incompliance with industrystandard.

ZG500 (below) enablesthe Zip Chillmaster tofully comply with theserequirements (see page53).

Zip Water Block

HE45004Recommended to befitted in the water supplyline to all Zip chilledproducts (exceptHydroTap) to minimisethe potential damage inthe event of leakage.

Hotwater

Hotwater

Zip offers one of the widest and most sophisticatedranges available in the UK

Instantaneous

• No standing heat loss, only heats water as required.

• Unlimited supply of hot water - subject to conditions and demand.

• Electronic temperature control automatically compensates forfluctuations in incoming water temperature and pressure.

Choose from:

ES; 2.8, 4.4 & 6.6kW (see pages 70-73).

CEX; 6.6 & 8.8kW (see pages 74-75).

DEX, DEX12 & DBX 18, 21, 24 & 27kW (see pages 76-77).

Unvented

• Fed directly from cold water mains.

• Quicker to install with no need for cold water storage cistern.

• Balanced hot and cold water supplies.

• High performance showering and faster filling baths.

• No special taps needed.

Choose from:

Aquapoint, 5 to 100 litres (see pages 80-81 & 86-87).

Varipoint, 10 to 100 litres (see pages 82-83 & 88-89).

AquaFlo, 90 to 300 litres (see pages 90-93).

Open Vented

• Easy to install.

• Single point of use.

• Overbasin and underbasin variants.

• Overbasin includes spout and valve.

• Underbasin requires vented taps.

Choose from:

Tudor, 5 & 10 litres (see pages 94-95).

Contract, 5 & 10 litres (see pages 96-97).

Cistern Fed Storage

• Can serve multiple outlets.

• Can be installed in ceiling voids.

• Reliable, ‘fit and forget’ solution.

Choose from:

RCH, 25 to 100 litres (see pages 98-99).

66 67

OverviewEnergy-efficient water heaters

Bare wire technologyThe Zip ES, CEX, DEX and DBXmodels feature bare wire heatingtechnology using stainless steelelements directly immersed inthe water flow path.This systemachieves maximum efficiency bymeans of direct contact with thewater flow plus the fastestpossible heat up times.

Unlimited supply of hot water *Zip InLine will deliver a continuoussupply at the selected temperature.

Easy installationZip InLine products simply connectto standard closed outlet tapswithout the need for unventedwater controls.

Smart designThe unit’s compact size enablesit to fit neatly and unobtrusively inany location.

Water conservationZip InLine is designed forinstallation close to the point ofuse, avoiding the need for waterto be run off before achievingtemperature.

Savings per draw off comparedto centralised systems with longpipe runs are as follows:

Hotwater

Hotwater

Why Zip InLine instantaneouswater heating?Zip InLine instantaneous waterheaters are the most energyefficient way of directly heatingwater electrically.

Using the very latest Germantechnology, Zip InLine offers ahost of Specifier, Installer andEnd User benefits:

• Unrivalled energy efficiency– No standing heat loss.

• Sophisticated electroniccontrol.

• Unlimited hot water supply.

• Easy to install.

• Compatible with standardtapware.

• Neat compact design.

• Tangible water savings.

Energy efficiencyZip InLine saves energy by:

• Heating only the waterdrawn off.

• Avoiding stored waterheat losses.

When comparing the energyused over 24 hrs to deliver 75litres of water at 38°C (assuming12°C supply) typical savings of23% can be achieved.

N.B. Percentage savings may beless with increased demand butmore during periods without drawoff.

68 69

Zip InLineinstantaneous water heatingThe inside story

Product Energy Usage

15 litre storagewater heater 3.0kWh

Zip InLine 2.3kWh

Traditional system Litres savedpipe run 15mm per draw off

10 metres 3.2

* Subject to sufficient power being available to achieve the requiredtemperature and outlet flow under local conditions.

Product Product Rating *38˚C Max DimensionsCode kW @ 230V Flow Rate W x D x H

ltrs/min (mm)

Instantaneous

ES3 Zip InLine 2.8 1.5 187 x 80 x 132

ES4 Zip InLine 4.4 2.4 187 x 80 x 132

ES6 Zip InLine 5.5 3.0 187 x 80 x 132

*Maximum flow rate based upon incoming water temperature of 12°C.

Hotwater

71

Zip InLine ES®NEW modelElectronic instantaneouswater heaterSingle outlet for hand washing

Hotwater

70


Compact electronically controlledinstantaneous water heater forhand washing.

Bare-wire for fast heat up.

Innovatively designed appliancethat heats the water automaticallyas it flows through.

No standing heat losses.

Heating power automaticallyadjusted to compensate forvariable inlet pressure andtemperature.

Supplied with 700mm ofpre-wired cable.

Outlet temperature factory set to38°C, but can be installeradjusted between 30°C to 45°C.

Intended for use with taps havingremovable M22/M24 nozzles.

External Flow regulation.

Easier servicing.

Easy to install with re-designed,improved wall bracket.

OperationHeating power is switched onautomatically once the minimumflow rate is exceeded.

RatingES3 2.8kW @ 230V.ES4 4.4kW @ 230V.ES6 5.5kW @ 230V.

Heating systemBare-wire heating system for fastresponse.

Safety featureWater temperature electronicallycontrolled to maintain factorysetting of 38°C.

Temperature settingTemperature and flow adjustableat time of installation.

IP ratingIP 25.

Product SelectionInstantaneous water heating is themost efficient available, however,delivered water temperature isdependent on local incomingwater temperature and supplyvoltage. Quoted performanceassumes 12°C incoming watertemperature and 230V supply.

CaseImpact resistant plastic.

ApprovalsWRAS, VDE, CE endorsed.

Taps - Important.For correct operation it isessential that the special tapnozzle supplied is fitted to thetap spout.Nozzles supplied to suitM22/24 taps should be used.


LocationThe appliance must be installedin a frost free environment.

PlumbingThe appliance is intended forconnection to the mains watersupply. It should be installed bya suitably qualified person. Theappliance may be used as anunvented or vented installation.N.B. Not recommended for usewith thermostatic mixing valvesor taps.

ElectricalThe appliance must be earthedand connected to the supply bymeans of permanent wiringthrough suitable isolation havinga contact separation of at least3mm in all poles. Installationmust comply with current IEEregulations.

Technical Data

Maximum temperature increase@ 230V and a flow rate of: ES3 ES4 ES6

2.0 litres/min 20°C 31°C 39°C





Switch on flow rate (litres/min) 1.2 1.5 1.5

Switch off flow rate (litres/min) 1.0 1.3 1.3

7372Hotwater

Hotwater Zip InLine ES®

Instantaneous hand wash packs –complete with heater, tap & fittings

Isolatingvalve

Flow rateadjuster

Nonreturnvalve

NC Pack (non-concussive tap)

MT Pack (mixer tap)

These new packs provide the installer with the ESheater, compatible tap and a comprehensiveplumbing kit including flexible hoses and fittings toensure quick and easy system installation.

The packs are offered in a choice of 3 power ratingswith non-concussive or mixer tap.

Non-concussive (NC) pack:

• ES instantaneous water heater.

• Non-concussive single outlet tap.

• 50cm flexible hose for connectionto heater.

• 50cm flexible hose for connectionto tap.

(Isolating valve NOT supplied).

Mixer Tap (MT) pack:

• ES instantaneous water heater.

• Single lever mixer tap completewith braided hoses.

• 50cm braided hose for connectionto heater.

• Flow rate adjuster for cold supply to tap.

• Non-return valve for hot supply to tap.

• Tee piece connector.

(Isolating valve NOT supplied).

ApprovalsWRAS, VDE, CE endorsed.

Product Tap Type Rating *38˚C Max Flow RateCode kW @ 230V ltrs/min

ES3/NC Non-concussive 2.8 1.5



ES3/MT Single lever mixer 2.8 1.5



ZL018 Matching non-concussive cold tap

Optionalmatchingcold tap

Isolatingvalve

Hotwater

75

Hotwater

74

Product Power 50˚C Max 38˚C Max Temperature DimensionsCode Rating Flow Rate Flow Rate setting range W x D x H

(kW @ 230V) ltrs/min ltrs/min (°C) (mm)

CEX-O 6.6 - 8.8 2.5 - 3.3 3.6 - 4.8 30 - 55 177 x 108 x 294

CEX-U 6.6 - 8.8 2.5 - 3.3 3.6 - 4.8 30 - 55 177 x 108 x 294

Zip InLine®CEXOver and Undersink ElectronicInstantaneous Water Heaters forSingle or Multiple Outlets

Technical Data

Maximum temperature increase @ 230V and a flow rate of: CEX

3.0 litres/min 31°C - 42°C




Switch on flow rate (litres/min) 2.0

* Subject to a minimum water pressure of 2 bar and maximum of 10 bar


• The most energy efficient wayof heating water electrically.

• Highly efficient bare wireheating system.

• Zero standing heat loss as nostored water.

• Instant hot water.

• Provides a constant* supply ofhot water at exactly thetemperature selected.

• Heating power adjustedelectronically to compensatesfor variable inlet pressures andtemperatures.

• Required temperature can beset using two touch sensitivekeys within the range 30°C to55°C with digital display.

• Maintains precise temperaturecontrol despite fluctuations involtage and water pressure.

• Suitable for use withpreheated water from solarsystems.

• Power rating can be selectedat time of installation.

• Optional wireless control(ZL016).

• CEX-O for oversink CEX-Ufor undersink installation.

Ratings6.6kW/8.8kW. Selected atinstallation.

Heating SystemBare-wire system.

IP RatingOversink IP25 Undersink IP24Suitable for Zone 1.

ApprovalsWRAS, VDE & CE endorsed.



In order to minimise thermallosses the distance between theappliance and the outlet fittingshould be as short as possible.

PlumbingThe appliance is intended forconnection to a mains potablewater supply. The specific waterresistance of the supply must notfall below the minimum specifiedon the rating plate.

Minimum flow rate 2 litres/min.

Should be installed by a suitablequalified installer of electricinstantaneous water heaters.

ElectricalThe appliance must be earthedand connected to the supply bymeans of permanent wiringthrough an isolation switchhaving a contact separation of atleast 3mm on all poles andprotected by a suitably ratedcircuit breaker.

The cross sectional area of theconnection cable must be inaccordance with the powerrating of the appliance.

The installation must be inaccordance with current IEEregulations.

Hotwater

77

Hotwater

76

Product Power 38ºC Max 50ºC MaxCode Rating Flow Rate Flow Rate

(kW) (ltrs/min) (ltrs/min)

DEX 12 8.8 - 11.0* 4.8 - 6.1 3.3 - 4.1

DEX 18.0** - 27.0*** 9.8� 6.8

DBX 18 18.0** 9.8� 6.8

DBX 21 21.0** 11.4� 7.9

DBX 24 24.0** 12.3� 9.0�

DBX 27 27.0*** 13.8� 10.2�

* 1/N/PE 230V ** 3/PE 280-4150V *** 3/PE 400V�mixed with cold water at the tap

Zip InLine® DEX, DEX12 & DBXElectronic InstantaneousWater Heaters for Singleor Multiple OutletsFeatures and benefitsAll models

• The most energy efficient wayof directly heating waterelectrically.

• Highly efficient bare wireheating system.

• Zero standing heat loss as nostored water.

• Instant hot water.

• Provides a constant* supplyof hot water at exactly thetemperature selected.

• Heating power adjustedelectronically to compensatefor variable inlet pressures andtemperatures.

• Maintains precise temperaturecontrol despite fluctuations involtage and water pressure.

• Optional remote controltemperature selection(using ZL017)

DBX:Outlet temperature set to 50°Cadjustable inside the appliancefrom 30°C to 60°C.

DEX:• If required, two temperaturesettings can be set using thetouch sensitive keys within therange 20°C to 60°C. (20°C to55°C for DEX12) with digitaldisplay of the selectedtemperature.

• Suitable for use with preheatedwater from solar systems (notDEX12).

• Power rating can be selectedat time of installation.

RatingsDEX12 8.8-11kW (adjustable)DEX 18-27kW (adjustable)DBX 18kW, 21kW, 24kW & 27kW.

Heating SystemBare-wire system.

IP RatingIP 25 – Suitable for Zone 1.

ApprovalsWRAS, VDE & CE endorsed.



In order to minimise distributionlosses the distance between theappliance and the outlet fittingshould be as short as possible(less than 2m).

PlumbingThe appliance is intended forconnection to a mains potablewater supply. The specific waterresistance of the supply must notfall below the minimum specifiedon the rating plate.

Minimum flow requirements:2 litres/min.

Should be installed by a suitablyqualified person.

N.B. Not recommended for usewith thermostatic mixing valvesor taps.

ElectricalThe appliance must be earthedand connected to the supply bymeans of permanent wiringthrough an isolation switchhaving a contact separation of atleast 3mm on all poles andprotected by a suitably ratedcircuit breaker.


The installation must be inaccordance with current IEEregulations.

380mm

210mm110mm

* Subject to a minimum water pressure of 2 bar and maximum of 10 bar

Hotwater

79

Zip InLineinstantaneous water heatingInstantaneous flow andtemperature rise chart

Hotwater

78

Zip InLineAccessoriesOptimum performanceFor the best results from the Zip InLine products the following tapspray nozzles, handsets and remote control should be used.

65

60

55

50

45

40

35

30

5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0Flow Rate (l/min) mixed with cold water at the outlet

Delivered

Temp(˚C)with12˚Cambient

Touch-free taps for use with Zip InLine

Tap spray nozzleCode Type Flow rates fromZL002 22mm female thread 2.0 litres/min

ZL003 24mm male thread 2.0 litres/min

Tap aerator nozzleZL008 15mm insert 3.5 litres/min

ZL004 22mm female thread 3.5 litres/min

ZL005 24mm male thread 3.5 litres/min

Shower hand setZL006 Fixed pattern 4.0 litres/min

Shower hand setZL007 4 mode adjustable 4.0 litres/min

Delivered

Temp(˚C)with12˚Cambient

Single Phase

Three Phase

DEX/DBX (18kW)DEX/DBX (21kW)DEX/DBX (24kW)DEX/DBX (27kW)

1 Long reach basin/sink tapTF001—Mains poweredTF002—Battery powered

2 Standard reach basin/sink tapTF003—Mains poweredTF004—Battery powered

3 Tubular wall mounted tapTF005—Battery poweredTF006—Mains powered

4 Tubular deck mounted tapTF007—Battery poweredTF008—Mains powered

5 Pillar tapTF009—Dual powered

6 Remote controlTF100 for 3, 4 & 5

7 Remote controlZL016 for CEXZL017 for DEX

8 Installation FrameZL020 for DEX & DBX

60

55

50

45

40

35

30

25

0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0Flow Rate (l/min)

ES3ES4ES6CEX (6.6kW)CEX (8.8kW)DEX12

1

3

4

5 6

8

7

2

Hotwater

Hotwater

80 81

Product Product Capacity Thermal Loss DimensionsCode litres kWh/day W x D x H

(mm)

Oversink

AP3/05/OB Zip Aquapoint III 5 0.35 256 x 260 x 376



Undersink

AP3/05 Zip Aquapoint III 5 0.35 256 x 260 x 376



Zip Aquapoint III®

Unvented water heaterSingle or multiple outlets5, 10, 15 litreUndersink and Oversink

Safety featuresManually resettable overtemperature safety cutout.

Expansion relief valve (supplied)set at 6 bar.

Sacrificial anode for addedprotection for element and tankin aggressive water conditions,requiring regular inspection andreplacement when necessary.

InstallationSeparate models available foroversink and undersinkinstallation.

All models can be wall mounted.

Undersink units can be installedunsupported on the floor ifrequired.

All models can supply one outletor multiple outlets, subject tocapacity, without the need forspecial taps.

PlumbingWater connections 1⁄2” BSPExpansion relief valve (supplied)set at 6 bar. Should be installedonly by a suitably experiencedinstaller of unvented electricstorage water heaters.

Oversink and undersink modelsnot interchangeable.


Supplied with 1 metre ofpre-wired cable.


Glass lined steel inner containertested to 12 bar.

Sacrificial anode for protectionagainst corrosion.

Element ‘ON’ neon indicator.

External temperature controlwith frost protection.

Oversink and Undersinkversions available.5, 10 & 15 litre.

Capacities5 litre, 10 litre, 15 litre.


Heating elementEmbedded rod type.

ThermostatCapillary type adjustable from7ºC to 75ºC.

Water tank1.8 mm glass enamelled steeltested to 12 bar.

CaseHigh impact resistant white plastic.

InsulationHigh density, CFC-freepolyurethane foam.

IP rating24.



Hotwater

Hotwater

82 83

Zip Varipoint II®

Unvented water heaterSingle or multiple outlets10, 15 litreUndersink & oversink

Safety featuresManually resettable overtemperature safety cut-out.

Pressure and temperature reliefvalve supplied.

Expansion relief valve supplied,set at 6 bar.

Frost protection setting.

InstallationSeparate models available foroversink and undersinkinstallation.

All models can supply one ormore outlets.

No special taps required.

Undersink is floor standing orwall hung on bracket (supplied).

Oversink is wall hung, on bracket(supplied).

PlumbingWater connections 1⁄2” BSP.

Pressure and temperature reliefvalve (supplied) should be fittedto heater.

Pressure relief valve (supplied)to be fitted in cold water supply.

Should be installed only by asuitably experienced installer ofunvented electric storage waterheaters.

Oversink and undersink modelsnot interchangeable.




Heavy gauge copper innercontainer tested to 16 bar.

Five year warranty on innercontainer, two years on controls.

Does not require an anode orregular inspection.

Supplied with temperature andpressure relief valve.

Oversink and undersinkversions available.10 litre or 15 litre.

External temperature control withfrost protection setting.


Supplied complete with wallmounting bracket.

Capacities10 litre, 15 litre.



ThermostatCapillary type adjustable upto 75ºC.

Water tankHeavy gauge copper, pressuretested to 16 bar.

CaseHigh impact resistant white plastic.


IP rating24.


WarrantyFive year on site parts and labourwarranty on inner container, twoyears on controls. For full detailsof the Zip Warranty Scheme visit:www.zipheaters.co.uk/warranty

Product Product Capacity Thermal Loss DimensionsCode litres kWh/day W x D x H

(mm)

Oversink

VP103 Zip Varipoint II 10 0.36 300 x 285 x 452

VP153 Zip Varipoint II 15 0.50 300 x 285 x 452

Undersink

VP103UB Zip Varipoint II 10 0.41 300 x 285 x 452

VP153UB Zip Varipoint II 15 0.58 300 x 285 x 452

HotWater

85

Zip AccessoriesUnvented water heating5, 10 & 15 litre capacity

Minimum length of pipe –Length ‘X’

Capacity 15mm pipe 22mm pipe5 litres 1.37m 0.6m10 litres 2.7m 1.2m15 litres 4.2m 1.8m

Diagram BInlet pressure less than 4 bar but expanded hot water cannot beaccommodated in the pipe work. (Install AQ2 expansion vessel andcheck valve).

Diagram CInlet pressure greater than 4 bar. (Install AQ2 expansion vessel and checkvalve with AQ3 pressure reducer).

Diagram DTemperature and pressure relief valve AQ1.

Aquapointor

Varipoint

Aquapointor

Varipoint

Aquapointor

Varipoint

Aquapoint Varipoint

Diagram AInlet pressure less than 4 bar and expanded hot water can be accommodatedin the pipe work.

AQ2

Expansionvessel andcheck valve(3.5 bar)

AQ3

Combinedpressure reducer(set at 3.5 bar)and line strainer

AQ1

Pressure and temperature relief valve (7 bar/90ºC).

Provides additional levels of safety when fitted to waterheater as shown in Diagram D.

Note: Varipoint supplied complete with AQ1.

Order AQ1 separately for use with Aquapoint.

AQ4 TMV2

Thermostatic blending valve complete with 2 check valves.(Set temp range 30º to 65ºC).

AQ4S TMV3

NHS Approved Thermostatic Blending Valve completewith 2 check valves. (Set temp range 30º to 50ºC).

These blending valves provide over temperature protectionand are also ideal for extending system capacity.

HotWater Zip Accessories

Unvented water heating5, 10 & 15 litre capacity

Varipoint & AquapointUnvented Accessory Selection

Additional Accessories

84

YESNO

NO

NO

NO

Will the pipework accommodate expanded water without hot water entering any supplypipe connected to a cold water draw-off? (See diagram A opposite and note minimumpipe lengths). If expansion in the cold water main is restricted, e.g. by a valve or meter,

an expansion vessel and other relevant accessories MUST be fitted.

Is reverse flow prevented, e.g. by a valve or meter?

Is the mains pressure 4.0 bar or less?

NOT REQUIREDFit AQ2 + AQ3

Is the mains pressure 4.0 bar or less?

Fit AQ2Fit AQ2 + AQ3

AQ4

AQ1

YES

YES YES

Hotwater

86Hotwater

87

Zip Aquapoint III®

Unvented water heaterMultiple outlet 30, 50, 80 & 100 litre


Safety featuresManually resettable safety cutout.

Heater protected against freezingwhile power switched on.

Factory fitted pressure andtemperature relief valve designedto operate at 7 bar and 90ºC.

Expansion relief valve set tooperate at 6 bar.

InstallationWall mounted. Ensure wall isstrong enough to support waterheater when full.

Must be installed by a qualifiedinstaller in accordance with LocalRegulations. England and Wales –Building Regulations G3.Scotland – Technical Standards P3.N. Ireland – Building Regulations P5.


Minimum recommended waterpressure 1 bar.

Unit supplied with full installationkit comprising: expansion vessel,pressure reducing valve, balancedtake off, expansion relief valve (6bar), line strainer, tundish and wallbrackets.

P&T and expansion relief valvesrequire plumbing to waste inaccordance with water authoritybylaws.

Sacrificial anode for addedprotection for element and innercontainer in aggressive waterconditions – requires regularinspection and replacementwhen necessary.

ElectricalTo be wired to a double poleswitched fused spur with aminimum break capacity of 13amps. Installation must complywith current IEE regulations.Element can be changed withoutdraining down.


Glass lined steel inner containertested to 13 bar.

Sacrificial anode for protectionagainst corrosion.


External temperature control withfrost protection.

High performance foam insulation.

Factory fitted P&T valve.

Element replacement can becarried out without draining.

Accessories (supplied)Pressure reducing valve and linestrainer set to 3.5 bar.

Expansion relief and single checkvalve set to 6 bar.

Pressure and temperature reliefvalve set to 7 bar and 90ºC.

External expansion vessel pre-charged to 3.5 bar.

Tundish and wall brackets.

Capacities30 litre, 50 litre, 80 litre, 100 litre.


Heating elementDry pocketed tubular.

ThermostatCapillary type adjustable20ºC to 75ºC.

Inner container1.8mm glass enamelled steeltested to 13 bar.

CaseCorrosion resistant whiteenamelled steel.



Product Product Capacity Weight Thermal DimensionsCode litres full (Kg) Loss W x D x H

kWh/day (mm)

AP3/30 Zip Aquapoint III 30 49 0.65 420 x 445 x 525




Hotwater

89

Hotwater Zip Varipoint III®

Unvented water heaterMultiple outlets30, 50, 80,100 litre

88



WarrantyFive-year on site parts and labourwarranty on inner container, twoyears on controls. For full detailsof the Zip Warranty Scheme visit:www.zipheaters.co.uk/warranty

Safety featuresManually resettable safety cutout.


Factory fitted pressure andtemperature relief valve designedto operate at 7 bar and 90ºC.

Expansion relief valve set tooperate at 6 bar.

InstallationWall mounted. Ensure wall andfixings are strong enough tosupport water heater when full.

Must be installed by a qualifiedinstaller in accordance with LocalRegulations. England and Wales –Building Regulations G3.Scotland – Technical Standards P3.N. Ireland – Building Regulations P5.


Minimum recommended waterpressure 1 bar.

Unit supplied with full installationkit comprising: expansion vessel,pressure reducing valve, balancedtake off, expansion relief valve (6bar), line strainer, tundish andwall brackets.

P&T and expansion relief valvesrequire plumbing to waste inaccordance with water authoritybylaws.



Heavy gauge copper innercontainer, tested to 12 bar.

Five year warranty on innercontainer, two years on controls.

Does not require an anode orregular inspection.

Supplied with factory fittedP&T valve and full installationfitting kit.

External temperature control.


High performance foaminsulation.

Accessories (supplied)Pressure reducing valve set to3.5 bar and line strainer.

Pressure relief valve set to 6 barand single check valve.

Pressure and temperature reliefvalve set to 7 bar and 90ºC.

External expansion vessel pre-charged to 3.5 bar.

Tundish and wall brackets.

Tee piece and drain valve.

Expansion vessel capacityVP303/VP505 = 5 litreVP803/VP953 = 8 litre



Heating elementReplaceable embedded rod type.

ThermostatCapillary type adjustable37ºC to 75ºC.

Inner containerHeavy gauge copper tested to12 bar.

CaseCorrosion resistant whiteenamelled steel.

Product Product Capacity Weight Thermal DimensionsCode litres full (kg) Loss H x Dia

kWh/day (mm)

VP303 Zip Varipoint III 30 50 0.732 620 x 430




Zip AquaFlo II®

Unvented water heaterUnvented stainless-steel cylinders90 to 300 litre capacity

Construction

• Direct, indirect and solarcompatible unvented waterheaters.

• Corrosion resistant DuplexStainless Steel cylinder.

• High performance, low profilecoil-in-coil heat exchanger.

• High performance CFC freeinjected polyurethane foaminsulation.

• White plastic coated steel caseresistant to scuffs anddamage.

• External expansion for reliabilityand ease of maintenance.

• Cylinder pressure tested to 15bar.

InstallationFor installation by a qualifiedinstaller in accordance with allnational and local BuildingRegulations.

Intended for floor standingonly – refer to Technical Datafor weight when full.

Nominal CapacityDirect and Indirect units:90, 120, 150, 180, 210, 250 and300 litres.

Solar Twin Coil and Solar Directunits: 150, 180, 210, 250 and300 litres.

Immersion ElementsIncoloy construction 1¾” thread.Length 14” Loading 3kW @240V.

Heat Exchanger22mm low profile, high efficiencystainless steel coil-in-coil.


Wide range of capacities from 90litres up to 300 litres.

High grade Duplex Stainless SteelUnvented Cylinder for long life.

Incoloy immersion elementsprovide excellent corrosionresistance.

Titanium replacement elementsavailable for high use applications.

Compact coil-in-coil heatexchangers provide fast heat upand recovery.

Multi-element options for fasterheat up.

High performance insulationensures minimum heat loss.

External expansion for optimumreliability, more usable space andease of maintenance.

No sacrificial anode. Avoids theneed for regular inspection.

22mm compression connectionsfor ease of installation.

Cylinders tested to 15 bar.

25 year transferable cylinderwarranty.

2 year warranty on all othercomponents.

Fully approved to UK WaterRegulations and BuildingsRegulations Part G3 and Part L.

90 91

ControlsThermostat – adjustable up to65°C.

Over temperature safety cut-out– Re-settable. Operates at 85°C.

Expansion relief valve – 6 bar.

Temperature and pressure reliefvalve – 90°C and 7 bar.

Tundish.

Two way valve with indirectmodels.

Pressure reducing valve – 3 bar.

Expansion vessel – Pre-chargedto 3 bar.

PlumbingFor connection to 22mm mainspotable water supply.

Minimum water supply 1.5 bar,20 l/min.

Maximum water supply pressure12 bar.

ElectricalTo be wired to a suitably rateddouble pole fused spur.

Installation must comply withcurrent IEE regulations.

ApprovalsKIWA approved to UK WaterRegulations.

KIWA approved to UK BuildingRegulations Part G3 and Part L.

Immersion element/thermostatBEAB approved and CEendorsed.

Warranty25 years on cylinder transferable(conditions apply).

2 years on all other components.

Hotwater

Hotwater

Zip AquaFlo II®

Unvented water heaterUnvented stainless-steel cylinders90 to 300 litre capacity

92 93Hotwater

Hotwater

AquaFlo DirectProduct Nominal Height Weight Weight Vol within Heat up Heat up Heat up Boost Low level High level StandingCode Capacity (mm) x Empty when Full 10ºC of set 3kW 6kW 9kW re-heat immersion immersion Loss

(L) 545 Dia (kg) (kg) temp (L) (mins) (mins) (mins) (mins) elements elements (kWh/day)

AF3090 90 727 21 111 73 76.0 - - - 1 0 1.07AF3120 120 915 26 146 102 103.0 - - 58.0 1 1 1.23AF3150 150 1102 33 183 133 134.0 - - 72.0 1 1 1.41AF3180 180 1290 38 218 163 164.0 - - 82.0 1 1 1.53AF3210 210 1478 41 251 194 203.0 - - 96.0 1 1 1.80AF3250 250 1728 46 296 236 248.0 - - 117.0 1 1 2.15AF3300 300 2041 55 355 288 323.0 - - 145.0 1 1 2.28AF3150S* 150 1102 33 183 133 134.0 73 57 72.0# 3 or 2 0 or 1 1.41AF3180S* 180 1290 38 218 163 164.0 88 67 82.0# 3 or 2 0 or 1 1.53AF3210S* 210 1478 41 251 194 203.0 108 80 96.0# 3 or 2 0 or 1 1.80AF3250S* 250 1728 46 296 236 248.0 130 95 117.0# 3 or 2 0 or 1 2.15AF3300S* 300 2041 55 355 288 323.0 168 120 145.0# 3 or 2 0 or 1 2.28

* Supplied with 3 elements and 4 bosses - 3 at low level and 1 at high level. Additional elements are available for installation in the 4th boss. # If using high level element

AquaFlo IndirectProduct Nominal Height Weight Weight Vol within Indirect Heat Recovery Boost Low level High level StandingCode Capacity (mm) x Empty when Full 10ºC of set Exchanger Indirect re-heat immersion immersion Loss

(L) 545 Dia (kg) (kg) temp (L) (kW) (mins) (mins) elements elements (kWh/day)

AF4090 90 727 23 111 74 16.46 12.0 - 1 0 1.07AF4120 120 915 30 148 105 16.46 16.0 - 1 0 1.23AF4150 150 1102 38 186 132 18.55 17.2 - 1 0 1.41AF4180 180 1290 42 220 160 18.55 20.4 - 1 0 1.53AF4210 210 1478 45 253 188 18.55 22.0 - 1 0 1.80AF4250 250 1728 51 299 232 22.00 25.0 117.0 1 1 2.15AF4300 300 2041 60 357 285 22.00 34.0 145.0 1 1 2.28

AquaFlo Solar CompatibleProduct Nominal Height Weight Weight Vol within Indirect Heat Solar Dedicated Recovery Boost Low level High level StandingCode Capacity (mm) x Empty when Full 10ºC of set Exchanger Heat Solar solar re-heat immersion immersion Loss

(L) 545 Dia (kg) (kg) temp (L) (kW) Exchanger Capacity (mins) (mins) elements elements (kWh/day)

Solar Twin CoilAF5150 150 1102 40 187 132 18.55 16.46 77 25.0* 12.0# 0 1 1.41AF5180 180 1290 45 222 160 18.55 18.55 95 26.3* 14.8# 0 1 1.53AF5210 210 1478 48 255 188 22 18.55 101 31.2* 15.5# 0 1 1.80AF5250 250 1728 53 300 232 22 22.00 107 33.0* 20.0# 0 1 2.15AF5300 300 2041 63 359 285 22 22.00 121 41.0* 25.0# 0 1 2.28

Solar DirectAF6150 150 1102 38 186 102 - 16.46 80 25.0* 72.0 1 1 1.41AF6180 180 1290 42 220 123 - 18.55 100 26.3* 82.0 1 1 1.53AF6210 210 1478 45 253 143 - 18.55 116 31.2* 96.0 1 1 1.80AF6250 250 1728 51 299 175 - 22.00 137 33.0* 117.0 1 1 2.15AF6300 300 2041 60 358 210 - 22.00 160 41.0* 145.0 1 1 2.28

Actual performance when installed will vary considerably dependant * Re-heat times based on BS12897 parameters with an 80°C primary flow at 15 l/min.on the rate of solar or other renewable input, number of panels etc. # Using Indirect heat exchanger

Hotwater

94Hotwater

95

Zip Tudor®

Over-sink or under-sink water heaterOpen outlet for single point of use5, 10 litre


OperationExternally adjustable temperaturecontrol.

Neon light indicates when theheating element is ‘ON’.

Safety featuresOpen-outlet non-pressurisedsystem.


Manually re-settable over-temperature safety cut-out.

InstallationSupplies hot water to a singleoutlet using spout or Zip ventedtaps. No need for expansionvessel or pressure relief valve.

Screws and wall fixings provided.

PlumbingCan be connected to a rising mainor to a cistern with a minimumworking head of 5 metres.

Over-sink models are suppliedwith a 300mm open outlet spoutand control valve.

Undersink models must only beconnected to Zip open-outlettaps, (see page 96).

Over-sink and under-sink modelsare NOT interchangeable.

ElectricalTo be wired to a double poleswitched fused spur with aminimum break capacity of 13amps. Installation must complywith current IEE regulations.Supplied with 1 metre of pre-wired cable.


Open outlet heater, for singlepoint of use.

Externally adjustable temperaturecontrol with frost protection.

Manually re-settable cutout.

Oversink models suppliedcomplete with spout and valve.

Undersink models for connectionto Zip open-outlet tapware only -(see page 94).


CFC-free insulation.

Impact resistant, easy clean,white plastic casing.

Neon power-on indicator light.

Choice of 5 and 10 litre capacity.

Supplied complete with wallplugs and screws.




ThermostatCapillary type, adjustable35˚C to 80˚C.

Inner containerPolypropylene tested to 1.5 bar.

CaseImpact resistant plastic.

InsulationMoulded CFC-free polystyrene.


Product Product Capacity Thermal DimensionsCode litres Loss W x D x H

kWh/day (mm)

Oversink

P4/52 Zip Tudor 5 0.32 255 x 215 x 390

P4/102 Zip Tudor 10 0.40 310 x 265 x 440

Undersink

P4/52UB Zip Tudor 5 0.32 255 x 215 x 390

P4/102UB Zip Tudor 10 0.40 310 x 265 x 440

For compatible taps see page 96

5 litre model

10 litre model

Hotwater

97

Hotwater

96

Zip Contract®

Over-sink water heaterOpen outlet for single point of use5, 10 litre

InsulationMoulded, CFC-free,Polystyrene foam.



Safety featuresSafety cut out in the event ofa thermostat failure.


InstallationAll models should be wall mounted.

Screws and wall fixings provided.

PlumbingCan be connected to a rising mainor to a cistern with a minimumworking head of 5 metres.

Supplied with a 300mm open outletspout and water control valve.

ElectricalTo be wired to a double poleswitched fused spur with aminimum break capacity of 13amps. Installation must complywith current IEE regulations.Supplied with 1 metre of cable.


Open outlet oversink waterheater for single point of use.

External temperature control withfrost protection.

Over temperature safety thermalfuse (C2/50 and C2/100).

Remotely resettable overtemperature protection (C3/50).

Supplied with inlet control valveand swivel outlet spout.

Impact resistant, easy clean,white plastic casing.

CFC-free insulation.

Choice of 5 or 10 litre capacity.




ThermostatCapillary type adjustable35˚C – 80˚C.

Inner containerPolypropylene tested to 1.5 bar.

CaseImpact resistant white plastic.

Product Product Capacity Thermal DimensionsCode litres Loss W x D x H

kWh/day (mm)

C2/50 Zip Contract 5 0.32 255 x 215 x 390

C2/100 Zip Contract 10 0.40 310 x 265 x 440

*C3/50 Zip Contract 5 0.32 255 x 215 x 390

*For use with Zip Tudor P4/52UB and P4/102UB

10 litre model

5 litre model

* Specialist product for temporary site applications with remotely resettable dry startprotection. For details contact Zip Technical support.

Zip AccessoriesVented Point of Use

*UB6

Single leverbasin tap

*UB1

Monoblocmixer

TS1

Telescopic spout300-600mm

*UB7

Single leversink tap

Hotwater

99

Hotwater

98

Zip RCH®

Cistern-type water heaterSingle or multiple outlet25, 50, 75, 100 litre

InstallationShould be mounted on a wall atleast one metre above thehighest draw-off point.

Wall and fixings should beadequate to support the weightof the heater when full.

Heater to be fixed using theintegral wall mounting bracket.

Top clearance of 150mm mustbe allowed for access to the ballvalve in the cistern tank.

Bottom clearance of 250mmmust be allowed for withdrawalof the heating element.

PlumbingCold inlet, left or right handconnection, 1⁄2” BSP.

Hot outlet, from base of heater,22mm compression fitting.

Drain connection, suppliedand fitted.

Overflow, left or right handconnection, 22mm compressionfitting.

Ball valve is for mains pressureoperation, brass body to BS1212-2.

ElectricalTo be wired to a double poleswitched fused spur with aminimum break capacity of 13amps.

RCH 100/6 should be providedwith its own dedicated supply.

Installation must comply withcurrent IEE regulations. Suppliedwith 1 metre of cable.



Patented design ensures thetemperature of the water in thecistern tank is maintained withincurrent regulatory limits.

Simple to install and maintain.

Trouble free operation.

Choice of 4 capacities.


Rating2.8 kW @ 230V(5.6 kW option on 100 litre).

Heating elementEmbedded rod.

ThermostatRod type, adjustable from5ºC – 65ºC.

Water tankHot water tank and cold waterfeed cistern are both manufacturedfrom copper sheet with brazedseams.

CaseCorrosion resistant, whitepowder coated steel.

InsulationFully fire-retardant foiledurethane core.

Safety featuresOver temperature cut-out.

ApprovalsWRAS, approval pending.CE endorsed.


Product Product Rating Capacity Weight DimensionsCode kW litres full W x D x H

@ 230V (kg) (mm)

RCH25 Zip RCH 3 25 53 470 x 210 x 705

RCH50 Zip RCH 3 50 106 600 x 320 x 750

RCH75 Zip RCH 3 75 136 600 x 320 x 925

RCH100 Zip RCH 3 100 164 600 x 320 x 1080

RCH100/6 Zip RCH 6 100 164 600 x 320 x 1080

Rear View SideView

Zip Hot WaterGeneral Data

Useful formulaeTime to heat stored water (mins) =

Litres x Temp Rise ( ˚C )

kW rating x 14.3

Temperature rise with an =14.3 x kW rating

instantaneous water heater ( ˚C ) Litres/min flow

Temperature Degrees Celsius = ( ˚F-32 ) x 5⁄9

Degrees Fahrenheit = ( ˚C x 9⁄5 ) + 32

Degrees Kelvin = ( ˚C + 273.2 )

Conversion factorsPressure 1 Bar = 14.5 psi

= 100 kiloNewtons/m2 = 100 kPa1 psi = 7 kPa

Heat 1 kiloCalorie (kCal) is the amount of energy requiredto raise 1 kg of water through one degree Celsius

GeneralData

100GeneralData101

Zip Hot WaterTypical applications

Application Suggested Page(Up to) Zip Products referenceSingle hand wash ES3*, ES4*, ES6* 70

1 basin CEX 74AP3/05, AP3/05/OB 80P4/52, P4/52UB 94C2/50 96

1 sink CEX* 74DEX12* 76AP3/30 86VP303 88

2 basins CEX* 74DEX12* 76AP3/10, AP3/10/OB 80VP103, VP103UB 82

3 basins AP3/15, AP3/15/OB 80VP153, VP153UB 82

1 basin, 2 sinks RCH25 98

3 basins, heavy use or 2 sinks DEX/DBX* 76

1 shower DEX12* 76DEX/DBX* 76

1 bath & shower DEX/DBX* 76AP3/80 86VP803 88RCH75 98

Bed-sit DEX/DBX* 76AP3/100 86VP953 88AF3120, AF4090 90RCH100 98

1 bath & shower (1-2 beds) DEX/DBX* 76AF3150, AF4120 90

1 bath & shower (3 beds) AF3180, AF4150 90




N.B. These application suggestions are based upon the assumption that the incomingwater supply temperature is 12°C.

For advice on product selection, if the incoming water temperature is likely to be lower,call our Technical Service Team on 0845 6 005 005

Zip Heaters (UK) Ltd reserves the right to modify the specificationof its products without notice and makes every effort to maintainthe accuracy of information contained in this publication.

The terms ‘Zip’, ‘HydroTap’, ‘Hydroboil’, ‘Econoboil’, ‘Duo’, ‘Chilltap’,‘Chillmaster’, ‘Wall Fountain’, ‘Chill Fountain’, ‘Aquapoint’, ‘Varipoint’,‘AquaFlo’, ‘Inline ES’, ‘InLine’, ‘Tudor’, ‘Contract’ and ‘RCH’ are allregistered trademarks.

The Zip Product Guide January 2013©Copyright Zip Heaters (UK) Ltd

102 103

Notes Notes

Zip product guide 2013

Documents

Transcript of Zip product guide 2013