Zen Rooms Kitchen Storage
description
Transcript of Zen Rooms Kitchen Storage
ZEN ROOMSINTERIORS FOR INNER PEACE
KITCHEN STORAGE FITTINGS AND ACCESSORIES
HSA power move® for use with Vauth-Sagel larder units,shown on pages 4-7
Recorner maxx® - working parts are virtually unseen,shown on pages 22-23
Swing out pantry unit with white Premea bases and Glasslineinserts, shown on pages 8-9
Contents
Premea glassline . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
HSA pull out larder units . . . . . . . . . . . . . . . . . . . . . .4-5
Power move® electric motor . . . . . . . . . . . . . . . . . . . . .6
HSA rotary larder units . . . . . . . . . . . . . . . . . . . . . . .6-7
DUSA® swing out pantry units . . . . . . . . . . . . . . . . .8-9
Base liner pull out system . . . . . . . . . . . . . . . . . . .10-11
Wari corner® swing out corner storage units . . . . .12-13
DSA pull out storage - frames and baskets . . . . .14-17
Pull out storage sets . . . . . . . . . . . . . . . . . . . . . . .18-19
Rotary 45º angled storage units . . . . . . . . . . . . . . . . .20
Pull out storage baskets . . . . . . . . . . . . . . . . . . . . . . .21
Recorner maxx® pole-free shelving units . . . . . . . .22-23
Twin corner pull out shelving units . . . . . . . . . . . .24-25
Slide corner shelving units . . . . . . . . . . . . . . . . . . . . .26
Swing out waste bins . . . . . . . . . . . . . . . . . . . . . . . . .27
Oeko liner pull out waste bins . . . . . . . . . . . . . . . . . .28
Oeko flexliner system for drawer boxes . . . . . . . . . . .29
1
Premea Glassline
HSA
The HSA pull out larder unit has an elegant and uniform design
and allows full access to the contents of every basket. Pages 4-5
The new Premea Glassline basket follows the current trend
towards glass and gives you the opportunity to create your
own individual kitchen furniture design.
• The new range of Premea Glassline baskets are available for
the complete range of Vauth-Sagel fittings
• The glass side panels are easy to change without any tools
• Decor panels are available in clear or frosted glass as
standard or create your own for a very individual kitchen
furniture design
Note: Glassline glass side panels are optional and must always
be ordered separately if required.
DUSA®
The proven classic DUSA® tall larder unit guarantees a high
degree of convenience and functionality. Its high safety
standards and harmonious design make it an element that you
do not want to be without in any state-of-the-art kitchen.
Baskets can be individually positioned at the required height in
both the cabinet frame and on the door frame. Pages 8-9
Frosted glass
Clear glass
2
Premea Glassline
DSA
The DSA side pull-out is the proven solution for base cabinets.
This popular classic has additional front stabilization and an
adjustment device for wide fronts and all angles. Pages 14-17
Recorner maxx®
This pole-free corner cabinet solution provides a distinctly
greater amount of storage space with no space limiting central
column, allowing optimum use of storage space. Pages 22-23
Wari corner®
This clever storage unit is designed so that the rear baskets automatically follow the front baskets when the door is opened and
pulled away from the cabinet, making all baskets easily accessible when the unit is fully opened. Pages 12-13
3
HSA Pull Out Larder Units
Baskets are included with larder unit sets, glass sides optional
HSA pull out larder units
Larder unit pulls out allowing full access to the contents of
every basket. Integrated soft close system ensures quiet,
smooth closing of the pull out.
Choice of wire baskets, linear or mesh, or white Premea solid
based baskets. Baskets are included with larder unit sets.
Additional single baskets are available for installed height of
2150-2330 mm.
Optional Glassline glass side insert sets can be ordered
separately for Premea style baskets.
Cabinets are not included.
Power move®
The power move®
electric motor for use
with larder units shown
on pages 4-7 is shown
in detail on page 6.
Power move® makes the
pull-out larder units even
smoother and more simple
to operate.
Fixings
included
75
250350450550
430
85
250350450550
430
81
428250350450550
soft
closing
4
For cabinet width 300 mm 400 mm 500 mm 600 mm
Basket width 250 mm 350 mm 450 mm 550 mm
Installed height (mm) Larder unit with mesh wire storage baskets
950-1200 547.20.501 547.20.511 547.20.521 547.20.531
1200-1450 547.20.502 547.20.512 547.20.522 547.20.532
1450-1700 547.20.503 547.20.513 547.20.523 547.20.533
1700-1950 547.20.504 547.20.514 547.20.524 547.20.534
1900-2150 547.20.505 547.20.515 547.20.525 547.20.535
2140-2330 547.20.506 547.20.516 547.20.526 547.20.536
Installed height (mm) Larder unit with linear wire storage baskets
950-1200 547.20.541 547.20.551 547.20.561 547.20.571
1200-1450 547.20.542 547.20.552 547.20.562 547.20.572
1450-1700 547.20.543 547.20.553 547.20.563 547.20.573
1700-1950 547.20.544 547.20.554 547.20.564 547.20.574
1900-2150 547.20.545 547.20.555 547.20.565 547.20.575
Installed height (mm) Larder unit with solid base Premea baskets
950-1200 547.20.601 547.20.611 547.20.621 547.20.631
1200-1450 547.20.602 547.20.612 547.20.622 547.20.632
1450-1700 547.20.603 547.20.613 547.20.623 547.20.633
1700-1950 547.20.604 547.20.614 547.20.624 547.20.634
1900-2150 547.20.605 547.20.615 547.20.625 547.20.635
Finish Left hand Right hand
Grey 547.24.651 547.24.650
Black 547.24.351 547.24.350
White 547.24.751 547.24.750
Finish Cat. No.
Polished chrome 547.24.252
Glass sides insert set for use with solid base Premea baskets
For use with Clear glass Frosted glass
1 basket set 547.24.441 547.24.541
4 basket set 547.24.444 547.24.544
5 basket set 547.24.445 547.24.545
Single basket set
For cabinet width 300 mm 400 mm 500 mm 600 mm
Basket width 250 mm 350 mm 450 mm 550 mm
Mesh wire storage baskets
1 basket set 547.25.351 547.25.350 547.25.353 547.25.354
Linear wire storage baskets
1 basket set 547.25.361 547.25.360 547.25.363 547.25.364
Solid base Premea storage baskets
1 basket set 547.25.681 547.25.680 547.25.683 547.25.684
HSA Pull Out Larder Units
HSA larder unit complete set, centre mounting, heightadjustable, full extension
• For installed heights:
950-1200 mm: 4x baskets included
1200-1450 mm, 1450-1700 mm: 4x baskets included
1700-1950 mm, 1900-2150 mm, 2140-2330 mm: 5x basketsincluded (single baskets can be ordered in addition separately)
• Built-in depth 470 mm
• For cabinet widths 300, 400, 500 or 600 mm
Set includes:
1x Frame set
1x Runner set
1x Basket set
Order qty: 1 set
Linear wire baskets Mesh wire baskets
Baskets with Premea base, polished
chrome fixing clips and glass sides
Glassline insert set
• Glass side panels (400 x 38.5 x 5 mm) and clips in quantities
suitable for 1, 4 or 5 basket sets (2 sides and 4 clips per basket)
• For use with solid base Premea baskets only
• Panels slot into fixing clips, fixing clips clip onto basket front/rear
Order qty: 1 set
Additional plastic clip set
• 1 set includes 2 pairs of clips, suitable to fit 2
glass sides to 1 Premea basket
Order qty: 1 set (1 set = 2 pairs)
49
16
20
49
16
Single additional basket set
• Four basket widths to suit cabinet widths 300, 400, 500 or 600 mm
• Available in 3 styles; mesh chrome wire, linear chrome wire or white
Premea solid base
• Additional single baskets can be added for installed height of 2150-
2330 mm up to a total of 7 baskets
• 2x Grey plastic basket hanging clips for 1 basket included
Order qty: 1 set
Additional plastic clip, other colours
• Handed; order 1 left and 1 right for each glass side
Order qty: 1 pc
5
HSA Rotary Larder Units, Power Move® Electric Motor
HSA rotary larder units rotate through 90° in either direction,
allowing full access to the contents of every basket.
A safety mechanism locks the runner when the unit rotates,
to prevent the unit from closing until the frame is moved
back in-line.
Integrated damping ensures quiet, smooth closing of the
pull out.
Choice of wire baskets, linear or mesh, or white Premea solid
based baskets. Baskets are included with larder unit sets.
Optional Glassline glass side insert sets can be ordered
separately for Premea style baskets.
Cabinets are not included.
Cat. No.
Power move® 547.21.090
Adaptor for rotary larder units 547.22.090
Power move® electric motor
• For use with larder units shown on pages 4-7
• Order adaptor separately when used with rotary larder units shown
on page 7
• Can be retro-fitted
• Fixings included
• Drive control is dependent on load and will adjust itself
automatically
• By lightly pulling or pressing the cabinet front the electric motor is
triggered to open the larder unit
• Rubber minimises the amount of noise transmitted to the cabinet
• Safety stop: Pull out movement is stopped if larder unit touches
person or object in the way
• If power fails, the larder unit can be used like a normal pull-out unit
• Grey plastic
Order qty: 1 pc
Chrome mesh baskets - rotary larder unit with chrome
plated steel mesh baskets.
6
Finish Left hand Right hand
Grey 547.24.651 547.24.650
Black 547.24.351 547.24.350
White 547.24.751 547.24.750
Finish Cat. No.
Polished chrome 547.24.252
Glass sides insert set for use with solid base Premea baskets
For use with Clear glass Frosted glass
5 basket set 547.24.445 547.24.545
HSA Rotary Larder Units
Fixings
included
soft
closing
300/400
Min. 500
16 -19
Min. 630
Max.
70
0
Min. 350
For cabinet width 300 mm 400 mm
Basket width 250 mm 350 mm
Installed height Larder unit with mesh wire storage baskets
1790-2040 mm 547.22.904 547.22.924
1990-2230 mm 547.22.905 547.22.925
Installed height Larder unit with linear wire storage baskets
1790-2040 mm 547.22.504 547.22.524
1990-2230 mm 547.22.505 547.22.525
Installed height Larder unit with solid base Premea baskets
1790-2040 mm 547.22.804 547.22.824
1990-2230 mm 547.22.805 547.22.825
HSA rotary larder unit complete set, centre mounting, height adjustable, full extension, with storage baskets
• For installed heights: 1790-2040 or 1990-2230 mm
• Built-in depth 500 mm
• For cabinet width 300 or 400 mm
Set includes:
1x Rotary frame set:
Hanging frame, silver epoxy coated tubular steel, height adjustable
Door panel mounting bars; 2x bars, silver epoxy coated steel
Fixing screws and fitting instructions
1x Runner set:
Top and bottom runners, zinc-plated steel, full extension, ball cage
top runner with damper and self closing bottom roller runner with
damper, max. load carrying capacity 80 kg per unit
Fixing screws and fitting instructions
1x Basket set:
5 mesh, linear or Premea solid base baskets
Grey plastic basket hanging clips
Door panel mounting plates; steel, 3 way adjustable
Adjustable plinth foot, for screw fixing, for plinth height 150 mm.
Included in 400 width set only
Glassline insert set
• Glass side panels (400 x 38.5 x 5 mm) and clips in quantities
suitable for 5 basket set (2 sides and 4 clips per basket)
• For use with solid base Premea baskets only
• Panels slot into fixing clips, fixing clips clip onto basket front/rear
Order qty: 1 set
Additional plastic clip set
• 1 set includes 2 pairs of clips, suitable to fit 2
glass sides to 1 Premea basket
Order qty: 1 set (1 set = 2 pairs)
49
16
20
49
16
Additional plastic clip, other colours
• Handed; order 1 left and 1 right for each glass side
Order qty: 1 pcOrder qty: 1 set
Cabinet is
not included
7
DUSA® Swing Out Pantry Units
DUSA® swing out pantry units
For 500 mm cabinet widths, this pull out pantry unit includes
baskets for both door frame and main pull out.
The pantry unit is easy to use; the baskets are pulled out of the
cabinet at the same time as the door is opened.
Baskets can be individually positioned at the required height in
both the cabinet frame and on the door frame.
Symmetrical height alignment of both cabinet and door
baskets is possible, if required.
Two integrated dampers ensures quiet, smooth closing of the
pull out.
Pantry units are supplied complete with choice of baskets
included: Baskets are available in chrome wire mesh, linear
wire or with white Premea solid base.
Optional Glassline glass side insert sets can be ordered
separately for Premea style baskets.
Cabinet is not included.
Symmetrical height alignment of both cabinet and door
baskets is possible, if required.
Baskets can be individually positioned at the required height in
both the cabinet frame and on the door frame.
Swing out pantry unit with Premea solid base storage baskets
and glass sides Swing out pantry unit with mesh wire storage baskets
8
DUSA® Swing Out Pantry Units
75
365
110
400 305
80
365
75
110
400 305
80
350 mm baskets
included in door
frame version sets
DUSA® swing out pantry unit complete set, centre anddoor mounting, height adjustable, full extension
Set includes:
• Hanging frame; silver epoxy coated tubular steel, height adjustable
• Door mounting frame; silver epoxy coated steel with zinc-plated
steel hinge support arms
• Top and bottom runners; full extension, ball cage top runner with
damper and self closing bottom roller runner with damper, max. load
carrying capacity 80 kg per unit
• Storage baskets for main frame; chrome-plated steel, available in
3 styles; mesh chrome wire, linear chrome wire or solid base
• Storage baskets for door frame, available in 3 styles; mesh
chrome wire, linear chrome wire or solid base
• Basket hanging and securing clips; grey plastic
• Door frame support hinges; grey plastic
• Door panel mounting bars; silver epoxy coated tubular steel
• Door frame fixing arm; grey plastic, adjustable
• Fitting instructions
For cabinet width 500 mm
Basket width 400 mm
Installed height
Pantry unit with mesh wire storage baskets
950-1200 mm 547.27.211
1200-1450 mm 547.27.212
1450-1700 mm 547.27.213
1700-1950 mm 547.27.214
1900-2150 mm 547.27.215
2150-2350 mm 547.27.216
Pantry unit with linear wire storage baskets
1900-2150 mm 547.27.245
Pantry unit with solid base Premea storage baskets
1700-1950 mm 547.27.714
1900-2150 mm 547.27.715
Order qty: 1 set
DUSA® swing out pantry unit complete set
• For installed heights:
950-1200 mm: 3x Each basket (door and main) included
1200-1450, 1450-1700 mm: 4x Each basket (door and main) included
1700-1950, 1900-2150 mm: 5x Each basket (door and main) included
2150-2350 mm: 7x Each basket (door and main) included
• Built-in depth 480 mm
• For cabinet width 500 mm
OpenClosed
Standard door version;
baskets 400 mm wide
Glass sides insert set for use with solid base Premea baskets
Finish Clear glass Frosted glass
Polished chrome clips 547.30.499 547.30.599
Glassline insert set
• Set includes:
5x Glass side panels for main frame baskets (372 x 38.5 x 5 mm)
5x Glass side panels for door frame baskets (233 x 38.5 x 5 mm)
20x Plastic clips (2 clips for each basket to secure glass side panel)
• Suitable for use with pantry sets 547.27.714 and 542.27.715 only
• Panels slot into fixing clips, fixing clips clip onto basket front/rear
Order qty: 1 set
49
16
85
84
84
369
400 305
Premea solid base storage baskets with glass sides
9
Base Liner Pull Out System
Base liner
The flexible storage system for base cabinets.
Bottom basket and side baskets are ordered separately to suit
your own requirements. The front attachment for the hanging
frame is height adjustable which means that either two or three
basket levels are possible - single bottom basket and then
either one or two pairs of side baskets to go above the base
basket.
For use with standard 450, 500 or 600 door fronts as well as
framed door fronts.
A bottle rack is also available, which can be purchased as an
option instead of a side basket.
max. 40 kg
Optional bottle rack also available
10
For cabinet width 450 mm 500 mm 600 mm
Basket width 187 mm 212 mm 262 mm
Mesh chrome 548.06.341 548.06.342 548.06.343
Chrome/Premea 548.06.741 548.06.742 548.06.743
For cabinet width 450 mm 500 mm 600 mm
Basket width 400 mm 450 mm 550 mm
Mesh chrome 548.06.331 548.06.332 548.06.333
Chrome/Premea 548.06.731 548.06.732 548.06.733
For cabinet width 450 mm 500 mm 600 mm
Rack width 162 mm 212 mm 262 mm
For 2 bottles 3 bottles 4 bottles
Cat. No. 548.06.221 548.06.222 548.06.223
Base Liner Pull Out System
Fixings
included
81
428400/450/550
For cabinet widths Cat. No.
450/500/600 mm 548.06.204
Base liner pull out frame
• Unhanded, for use with baskets shown
• Installed height: 587-800 mm
• Built-in depth: Min. 470 mm
• For cabinet width 450/500/600 mm
• Set includes
1x Base mounted frame; silver epoxy coated steel
2x Door panel hanging plates; silver epoxy coated steel
1x Pair ball bearing runners; galvanized steel with integrated soft
close damper
Fixing materials and fitting instructions
Order qty: 1 set
soft
closing
Order frame and basket sets separately
Base liner bottom storage basket set
• Unhanded
• Height x depth: 81 x 428 mm
• Set includes 1x storage basket and 2x grey plastic securing clips
• Polished chrome-plated steel baskets, available as mesh or with
white Premea base
• Glass insert sides are available for Premea basket only - see below
• Note: Pull out frame must be ordered separately
Order qty: 1 set
Glass sides insert set for use with solid base Premea baskets
For use with Glass width Clear glass Frosted glass
Bottom basket set 400 mm 547.24.441 547.24.541
Side basket set 422 mm 548.06.490 548.06.590
Glassline insert set
• Glass side panels (400/422 x 38.5 x 5 mm) and polished chrome
plastic clips in quantities suitable for:
Bottom basket set - 2 sides and 4 clips per basket
Side basket set - 1 side and 2 clips per basket
• For use with Base liner solid base Premea baskets only
• Panels slot into fixing clips, fixing clips clip onto basket front/rear
Order qty: 1 set
49
16
75
455
75
455
Base liner side storage basket set
• Unhanded
• Height x depth: 75 x 455 mm
• Set includes 1x storage basket and 2x grey plastic securing clips
• Polished chrome-plated steel baskets, available as mesh or with
white Premea base
• Glass insert sides are available for Premea basket only - see below
• Note: Pull out frame must be ordered separately
Order qty: 1 set
For 450 mm cabinet width
Holds 2 bottles
For 500 mm cabinet width
Holds 3 bottles
For 600 mm cabinet width
Holds 4 bottles
Base liner bottle rack (optional)
• Unhanded, alternative option to side basket
• Height x depth: 79 x 455 mm
• Set includes 1x rack and 2x grey plastic securing clips
• Polished chrome-plated steel
Order qty: 1 set
Fixings
included
16-19
470 Min.
450/500/600
81
428400/450/550
11
Wari Corner® Swing Out Corner Storage Units
This clever storage unit is designed so that the rear baskets
automatically follow the front baskets when the door is
opened and pulled away from the cabinet.
Door front fixing with integrated 3D adjustment and central
height alignment allows the swing out corner storage unit to
be fitted perfectly.
Upon opening, the front baskets automatically swing away
leaving free access to the back basket, making all baskets
easily accessible when the unit is fully opened.
Integrated damping ensures quiet, smooth closing of the
pull out.
Optional Glassline glass side insert sets can be ordered
separately for Premea style baskets.
Automatic pull-out action - rear baskets automatically follow frontbaskets when the door is pulled away from the cabinet.
Right hand shown.
1 2 3
Choice of baskets:
White premea base with glass side inserts
Automatic pull out action
Right hand version shown
Mesh wire baskets
12
Glass sides insert set for use with solid base Premea baskets
For use with Clear glass Frosted glass
800 mm version 548.19.468 548.19.568
900 mm version 548.19.469 548.19.569
Wari Corner® Swing Out Corner Storage Units
450 305/230*430/330*370
7676
76
76
450
76
Mesh chrome
wire baskets
Linear chrome
wire baskets
Solid base baskets,
white Premea
Choice of baskets included with sets
Rear hanging frame and door frame - left hand version shown
RR
76
450305/230*
430/330*
305/230*
430/330*
370
370
Fixings
included
soft
closing
Wari corner® swing out corner storage unit complete set, automatic pull out action
• Installed height: 530 mm
• Built-in depth: 485 mm
• For minimum cabinet width 800 or 900 mm, 900 mm version can
also be used in 1000 or 1200 mm cabinets
Set includes:
1x Frame set:
Rear hanging frame and base mounting track; silver epoxy coated
tubular steel
Door frame with pivot; silver epoxy coated tubular steel
Back frame; silver epoxy coated tubular steel
Door frame follower; fiber glass improved plastic
Door panel hanging plates; silver coloured steel, 3 way adjustable,
800 mm version to suit 400 mm door widths 900 mm version to suit
450, 500 and 600 mm door widths
Fixing screws and fitting instructions
1x Basket set:
2x Storage baskets (rear); chrome-plated, available in 3 styles;
mesh chrome wire, linear chrome wire or Premea white solid base,
max. load carrying capacity 9.5 kg
2x Storage baskets (door); chrome-plated, available in 3 styles;
mesh chrome wire, linear chrome wire or Premea white solid base,
max. load carrying capacity 8 kg
Order qty: 1 set
Glassline insert set
• Set includes:
2x Glass side panels for cabinet baskets 300*/400 x 38.5 x 5 mm
2x Glass side panels for front baskets 420 x 38.5 x 5 mm
8x Clips for side panels, polished chrome plastic
• Suitable for 1 unit
• For use with solid base Premea baskets only
• Panels slot into fixing clips, fixing clips clip onto basket front/rear
Order qty: 1 set
49
16
800 mm version*
Basket style Left hand Right hand
Mesh wire, chrome-plated 548.17.225 548.17.224
Linear wire, chrome-plated 548.17.205 548.17.204
Solid base, white Premea, chrome 548.17.265 548.17.264
900 mm version (also for 1000 and 1200 mm)
Basket style Left hand Right hand
Mesh wire, chrome-plated 548.17.235 548.17.234
Linear wire, chrome-plated 548.17.215 548.17.214
Solid base, white Premea, chrome 548.17.275 548.17.274
Finish Cat. No.
Polished chrome 547.24.252
Additional plastic clip set
• 1 set includes 2 pairs of clips, suitable
to fit 2 glass sides
Order qty: 1 set (1 set = 2 pairs)
20
49
16
Finish Left hand Right hand
Grey 547.24.651 547.24.650
Black 547.24.351 547.24.350
White 547.24.751 547.24.750
Additional plastic clip, other colours
• Handed; order 1 left and 1 right for each glass side
Order qty: 1 pc
Right hand version shown above
13
DSA Pull Out Storage - Frame and Baskets
150 mm cabinets - order frame and 82 mm basket set separately
472
450
Fixings
included
Finish Cat. No.
Silver epoxy coated 546.39.996
Pull out storage unit frame
• Unhanded, for use with baskets shown
• Integrated soft close damper
• Installed height: 600 mm
• Built-in depth: See baskets, for cabinet width 150/300 mm
• Steel
Order qty: 1 set
962
494 450
450
open
closed
soft
closing
Storage basket set, 82 mm width
• Unhanded
• Built-in depth: 495 mm
• Set includes 2x storage baskets, 4x clips and 2x door hanging
plates
• Polished chrome-plated steel baskets, zinc-plated steel basket
securing clips and door hanging plates
• Note: Pull out frame must be ordered separately
Basket style Cat. No.
Mesh chrome wire basket set 546.39.380
White Premea base basket set 546.39.330
Order qty: 1 set
75
82
470
84
470
82
Fixings
included
Glass sides insert set for use with solid base Premea baskets
For use with Clear glass Frosted glass
90º 82/230 mm basket sets 546.40.480 546.40.580
Glassline insert set
• Glass side panels (442 x 38.5 x 5 mm) and clips in quantities
suitable for 90º 82 and 230 mm basket sets, i.e. 2 side panels and
4 clips (1 side and 2 clips per basket)
• For use with 90º solid base Premea baskets only
Panels slot into fixing clips, fixing clips clip onto basket front/rear
Order qty: 1 set (= 2 side panels and 4 clips)
49
16
Pull out storage unit frame must be ordered separately - shown above
DSA
The DSA side pull-out is the proven solution for base cabinets.
This popular classic has additional front stabilization and an
adjustment device for wide fronts and all angles.
Frame has integrated soft close damper.
Order frame and baskets separately. Optional Glassline glass
side insert sets can be ordered separately for Premea style
baskets.
14
DSA Pull Out Storage - Frame and Baskets
- order frame and basket with oven tray holder set separately - order frame and basket/towel holder set separately
Mesh chrome wire set Left hand Right hand
Cat. No. 546.39.350 546.39.340
Storage basket and towel holder set, 82 mm width
• Left or right handed
• Built-in depth: 495 mm
• Set includes 1x storage basket,
1x towel rail, 4x clips and 2x door hanging plates
• Polished chrome-plated steel basket and towel rail,
zinc-plated steel basket securing clips and door
hanging plates
• Note: Pull out frame must be ordered separately
Order qty: 1 set
470105
82
420
88
2828
Fixings
included
Mesh chrome wire set Cat. No.
Unhanded 546.39.440
Storage basket and oven tray holder set, 82 mm width
• Unhanded
• Built-in depth: 495 mm
• Set includes 1x storage basket, 1x oven tray holder, 4x
clips and 2x door hanging plates
• Polished chrome-plated steel basket and towel rail, zinc-
plated steel basket securing clips and door hanging plates
• Note: Pull out frame must be ordered separately
Order qty: 1 set
470105
82
470
82
88
Fixings
included
Pull out storage unit frame must be ordered separately -refer to page 14
Pull out storage unit frame must be ordered separately -refer to page 14
15
DSA Pull Out Storage - Frame and Baskets
300 mm cabinet - order frame, 230 mm basket set and optional glass sides separately
Fixings
included
470
80
230 470
80
230
Basket style Cat. No.
Mesh chrome wire basket set 546.39.243
White Premea base basket set 546.39.233
Storage basket set, 230 mm width
• Unhanded
• Built-in depth: 495 mm
• Set includes 2x storage baskets, 4x securing clips and 2x door
hanging plates
• Polished chrome-plated steel baskets, zinc-plated steel securing
clips and door hanging plates
• Note: Pull out frame must be ordered separately
Order qty: 1 set
Glass sides insert set for use with solid base Premea baskets
For use with Clear glass Frosted glass
90º 82/230 mm basket sets 546.40.480 546.40.580
Glassline insert set
• Glass side panels (442 x 38.5 x 5 mm) and clips in quantities
suitable for 90º 82 and 230 mm basket sets, i.e. 2 side panels and
4 clips (1 side and 2 clips per basket)
• For use with 90º solid base Premea baskets only
• Panels slot into fixing clips, fixing clips clip onto basket front/rear
Order qty: 1 set (= 2 side panels and 4 clips)
49
16
Pull out storage unit frame must be ordered separately -refer to page 14
16
DSA Pull Out Storage - Frame and Baskets
Angled 300 mm cabinet - order frame and angled basket set separately
Right hand
45º version shown
450230
80
84
450
230
Fixings
included
Basket angle 30/35º 45º
Mesh chrome wire basket set
Left hand 546.39.053 546.39.153
Right hand 546.39.043 546.39.143
White Premea base basket set
Left hand 546.39.033 546.39.133
Right hand 546.39.023 546.39.123
30/35º or 45º basket set, 230 mm width
• Left or right handed
• Built-in depth: 510 mm for 30/35º, 520 mm for 45º baskets
• Set includes 2x storage baskets, 4x securing clips and 2x door
hanging plates
• Polished chrome-plated steel baskets, zinc-plated steel securing
clips and door hanging plates
• Note: Pull out frame must be ordered separately
Order qty: 1 set
Glass sides insert set for use with solid base Premea baskets
For use with Glass width Clear glass Frosted glass
30/35º basket sets 282 mm 546.40.490 546.40.590
45º basket sets 214 mm 546.40.491 546.40.591
Glassline insert set
• Glass side panels (282/214 x 38.5 x 5 mm) and clips in quantities
suitable for 30/35º or 45º 230 mm basket sets, i.e. 2 side panels
and 4 clips (1 side and 2 clips per basket)
• For use with angled solid base Premea baskets only
• Panels slot into fixing clips, fixing clips clip onto basket front/rear
Order qty: 1 set (= 2 side panels and 4 clips)
49
16
Glass side width without clips:
282 mm for 30/35º baskets
214 mm for 45º baskets
Pull out storage unit frame must be ordered separately -refer to page 14
Handed
L R
17
Pull Out Storage Sets
For cabinet width Cat. No.
150 mm 545.12.282
90˚ Storage basket and oven trayholder set, 100 mm width
• Handed - right handed only, as per
photograph shown
• Installed height: 600 mm
• Built-in depth: 500 mm
Set includes:
• Storage basket; 1x basket, heavier gauge
chrome-plated steel with solid base
• Oven tray holder; 1x holder, heavier
gauge chrome-plated steel
• Ball bearing runners; 1x pair of runners,
galvanized steel, full extension, self closing
including 2 dampers
• Basket securing clips; 4x clips, zinc-
plated steel
• Door hanging plates; 2x plates, zinc-
plated steel
Order qty: 1 set
4.0
soft
closing
Pull out storage sets
Three options available for 150 mm cabinets:
Storage basket with oven tray holder
Storage basket with towel holder
Two tier storage basket set
Sets include soft closing runners and storage fittings.
150 mm cabinet - basket, oven tray holder and runners all included in the set, for installation on right hand side only, as shown
18
Pull Out Storage Sets
For cabinet width Cat. No.
150 mm 545.12.272
90˚ Storage baskets set, 100 mmwidth
• Handed - right handed only, as per
photograph shown
• Installed height: 600 mm
• Built-in depth: 500 mm
Set includes:
• Storage baskets; 2x baskets, heavier
gauge chrome-plated steel with solid base
• Ball bearing runners; 1x pair of runners,
galvanized steel, full extension, self closing
including 2 dampers
• Basket securing clips; 4x clips, zinc-
plated steel
• Door hanging plates; 2x plates, zinc-
plated steel
Order qty: 1 set
1
4.0
soft
closing
For cabinet width Cat. No.
150 mm 545.12.252
90˚ Storage basket and towel holderset, 100 mm width
• Handed - right handed only, as per
photograph shown
• Installed height: 600 mm
• Built-in depth: 500 mm
Set includes:
• Storage basket; 1x basket, heavier gauge
chrome-plated steel with solid base
• Towel holder; 1x 2-rail holder, heavier
gauge chrome-plated steel
• Ball bearing runners; 1x pair of runners,
galvanized steel, full extension, self closing
including 2 dampers
• Basket securing clips; 4x clips, zinc-
plated steel
• Door hanging plates; 2x plates, zinc-
plated steel
Order qty: 1 set
4.0
soft
closing
- basket, towel holder and runners - two tier basket set and runners
19
Rotary 45º Angled Storage Units
Rotary angled storage units
Designed to suit the increasing popular chisel fronted cabinets.
The baskets pull out from the unit and rotate, so that the entire
contents of the baskets are easily accessible.
45°
Fixings
included
Rotary, 45° angled storage unit withchrome wire mesh baskets
• For 45° angled cabinets
• For installed height 630 mm
• Built-in depth 500 mm
• For minimum cabinet width 300 mm
Set includes:
• Hanging frame; silver epoxy coated steel,
max. load carrying capacity 16 kg per unit
• Storage baskets; 3x chrome-plated steel,
mesh chrome wire, 210 x 450 mm
• Fixing clips; silver epoxy coated steel
• Fitting instructions
For cabinet width Left hand Right hand
300 mm 546.37.551 546.37.541
Order qty: 1 set
Handed
L R
Note: Diagram and photos show right hand version.
Angled 300 mm cabinet - 45º angled storage unit, right hand version shown
20
Pull Out Storage Baskets
Pull out storage baskets
Storage basket sets for hinged door cabinets or cabinets with
door fronts.
Sets include 1 basket and 1 pair of runners, for either 500 or
600 mm cabinet widths.
For hinged door cabinets For door front fixing cabinets
Order door front fixing
brackets separately
185
487462-468
562-568
160
487462-468
562-568
Fixings
included
soft
closing
Pull out storage set with chrome wiremesh baskets
• To suit 500 or 600 mm cabinet widths with
15/16 or 18/19 mm board thickness
• Minimum internal depth: 515 mm
• Comprises:
1x Storage basket, chrome-plated steel, mesh
chrome wire, max. load carrying capacity 20 kg
per basket
• 1x Pair ball bearing runners, galvanized steel,
full extension, self closing
• Fitting instructions
For cabinet width 500 mm 600 mm
For hinged door cabinets 548.01.214 548.01.216
For door front fixing cabinets 548.01.204 548.01.206
Door front fixing brackets (1 pair) 548.01.999
Order qty: 1 set
For 500 or 600 mm cabinet widths - set includes one storage basket and one pair soft closing runners
21
Recorner maxx® Pole-free Shelving Units
Recorner maxx®
This pole-free corner cabinet solution provides a distinctly
greater amount of storage space with no space limiting
central column, giving optimum use of storage space for
bulky accessories such as bowls, trays and pans.
Shelves are side mounted to carcase walls using an
ingenious pole-free system.
For 900 mm cabinet width Cat. No.
Three quarter carousel unit 542.62.712
Full circle carousel unit 542.62.722
Recorner maxx® pole-free shelving unit
• Suitable for 900 mm corner base cabinets
• Built-in depth: 500 mm
• Unhanded
• 27.5 kg carrying capacity per shelf
• Designed with no central column to give greatest amount of storage
space and with adjustable shelf heights to suit different cabinet
heights
• Can be retro-fitted into existing cabinets
• Shelves rotate independently of each other
• 2x: Set includes 2x 3/4 or 2x 4/4 white wood round shelves with
polished chrome rail, lower shelf central bearing, upper shelf
diagonal strut and fitting instructions
• Fixing screws not included, order Cat. No. 015.71.839 separately
Order qty: 1 set (1 set = 2 shelves and fittings)
900 900
900 900540-570
Min. 500 Min. 500
Ø 760 Ø 760
Max. 350
835 835
Photograph above shows 3 sets of Recorner maxx® installed Recorner maxx® with polished chrome rail
22
Recorner maxx® Pole-free Shelving Units
For 900 mm cabinet width Cat. No.
Three quarter carousel unit 542.62.742
Full circle carousel unit 542.62.752
Recorner maxx® pole-free shelving unit with plexiglasssides
• Suitable for 900 mm corner base cabinets
• Built-in depth: 500 mm
• Unhanded
• 27.5 kg carrying capacity per shelf
• Designed with no central column to give greatest amount of storage
space and with adjustable shelf heights to suit different cabinet
heights
• Can be retro-fitted into existing cabinets
• Shelves rotate independently of each other
• 2x: Set includes 2x 3/4 or 2x 4/4 white wood round shelves with
polished chrome edging and plexiglass inserts, lower shelf
central bearing, upper shelf diagonal strut and fitting instructions
• Fixing screws not included, order Cat. No. 015.71.839 separately
Order qty: 1 set (1 set = 2 shelves and fittings)
Recorner maxx® with plexiglass sides
23
Twin Corner Pull Out Shelving Units
Built-in depth
490 mm
For door width
450/500/600 mm
Fixings
included
Twin corner pull out shelving unit
Twin corner includes 2 shelves and all fittings for installation
in 900 or 1000 mm plus corner cabinets with 450 or 500
mm doors.
Designed so that the pull out section automatically begins to
pivot as the unit is pulled out of the cabinet.
Slide corner shelving unit shown on page 26 has the same
pull-out pivot action, but has the additional feature of shelves
which can be pulled out independently of one another.
Note: Diagram and photos show right hand version.
Shelves pull out together
Twin corner pull out shelving unit with railing, right hand version
24
Twin Corner Pull Out Shelving Units
Twin corner pull out shelving unit with railing
• Suitable for 900, 1000 or min. 1000 mm corner base cabinets
• Built-in depth: 490 mm
• Left or right handed
• Designed so that the pull out section automatically begins to pivot
as the unit is pulled out of the cabinet
• Shelves pull out together
• Set includes 2x laminated wooden shelves, with a white base and
polished chrome rail, pull out and pivoting mechanism and fitting
instructions
For cabinet width For door width Left hand Right hand
900 mm 450 mm 542.08.246 542.08.245
1000 mm 500 mm 542.08.251 542.08.250
Min. 1000 mm 600 mm 542.08.261 542.08.260
Order qty: 1 set
Twin corner pull out shelving unit without railing
• Set includes 2x laminated wooden shelves, with a white base and
polished chrome edge, pull out and pivoting mechanism and fitting
instructions
For cabinet width For door width Left hand Right hand
900 mm 450 mm 542.08.846 542.08.845
1000 mm 500 mm 542.08.851 542.08.850
Order qty: 1 set
Twin corner pull out shelving unit with plexiglass sides
• Set includes 2x laminated wooden shelves, with a white base and
polished chrome edging and plexiglass inserts, pull out and pivoting
mechanism and fitting instructions
For cabinet width For door width Left hand Right hand
1000 mm 500 mm 542.08.351 542.08.350
Order qty: 1 set
Twin corner pull out shelving unit without railing, right hand version
25
Slide Corner Pull Out Shelving Units
Fixings
included
Note: Diagram and photos show right hand version
Built-in depth
490 mm
For door width
450/500/600 mm
Slide corner shelving unit
• Suitable for 900, 1000 or min. 1000 mm corner base cabinets
• Built-in depth: 490 mm
• Left or right handed
• Designed so that the pull-out section automatically begins to pivot
as the unit is pulled out of the cabinet
• Shelves pull out independently of one another
• Set includes 2x laminated wooden shelves, with a white base and
polished chrome rail, slide and pivoting mechanism and fitting instructions
For cabinet width For door width Left hand Right hand
900 mm 450 mm 542.07.746 542.07.745
1000 mm 500 mm 542.07.751 542.07.750
Min. 1000 mm 600 mm 542.07.761 542.07.760
Please note: 92º cabinet hinges must be used, as door needs to open a
minimum of 92º to allow the unit to pull out.
Wide corner post must also be fitted, if D handles or similar protruding
handles are used on the unit doors.
Right handed version
min. 92°
Slide corner pull out shelving unit
Slide corner includes two shelves and all fittings for installation in
corner cabinets. Shelves do not obstruct adjacent cabinet when
pulled out and pull out independently of each other.
Slide corner shelving unit with plexiglass sides
• Set includes 2x laminated wooden shelves, with a white base and
polished chrome edging and plexiglass inserts, slide and pivoting
mechanism and fitting instructions
For cabinet width For door width Left hand Right hand
900 mm 450 mm 542.07.346 542.07.345
1000 mm 500 mm 542.07.351 542.07.350
Min. 1000 mm 600 mm 542.07.361 542.07.360
Order qty: 1 pc
Slide corner pull out shelving unit with chrome rail, right hand version
26
Swing Out Waste Bins
For cabinet width Bins included Cat. No.
Min. 500 mm 1x 19, 1x 12, 1x 9 litre bins 502.79.503
Swing out waste bin
• For hinged door cabinets, for
side wall and base mounting
to cabinets, by means of a
side fixing bracket and base
mounting weight bearing pivot
• Designed to be withdrawn
from the cabinet whilst the lid
remains inside
• Can be mounted left or right handed
• Installed height x width x depth:
525 x 460 x 460 mm
• Silver epoxy coated steel wire frame
housing and light grey plastic mounting
components and lid included
• Light grey plastic bins with yellow, light
grey and blue coloured handles
• Total capacity: 40 litres
Order qty: 1 pc
Fixings
included
500
For cabinet width Bins included Cat. No.
Min. 500 mm 1x 12, 3x 9 litre bins 502.79.504
Swing out waste bin
• For hinged door cabinets, for side wall and base mount-
ing to cabinets, by means of a side fixing bracket and
base mounting weight bearing pivot
• Designed to be withdrawn from the cabinet whilst the lid
remains inside
• Can be mounted left or right handed
• Installed height x width x depth:
525 x 460 x 460 mm
• Silver epoxy coated steel wire frame housing and light
grey plastic mounting components and lid included
• Light grey plastic bins with yellow, light grey, blue and
green coloured handles
• Total capacity: 39 litres
Order qty: 1 pc
500
Swing out waste bin with one 12 litre and three 9 litre bins
Fixings
included
27
Oeko Liner Pull Out Waste Bins
For cabinet Installed
width height Bins included: Cat. No.
400 mm 370 mm 2x 10 litre bins 503.04.503
450 mm 470 mm 2x 21 litre bins 503.04.514
500 mm 470 mm 1x 21, 1x 28 litre bins 503.04.515
600 mm 470 mm 2x 28 litre bins 503.04.517
Oeko liner pull-out waste bin
• For door front fixing cabinets, for side wall
mounting to cabinets
• Designed to be withdrawn from the cabinet
whilst the lid remains inside for use as shelf
• Installed height: See table below
Installed depth: 470 mm
• Silver epoxy coated steel side panels, lid,
frame housing and mounting components
and grey plastic bins
• Total capacity: 20, 42, 49 and 56 litres
Order qty: 1 pc
Fixings
included
soft
closing
500 600
400 450
Photo shows 600 mm wide cabinet with two 10 litre bins and one 22 litre bin - information available on request.
500 width
470 depth
600 width
470 depth
450 width
470 depth
400 width
470 depth
1 x 28litres
1 x 28litres
1 x 28litres
1 x 21litres
1 x 21litres
1 x 21litres
1 x 10litres
1 x 10litres
28
Oeko Flexliner System for Drawer Boxes
Fixings
included
For drawer width Bins included Cat. No.
500 mm 2x 21 litre bins 503.16.502
600 mm 2x 28 litre bins 503.16.503
800 mm 2x 28, 1x 21litre bins 503.16.504
Oeko flexliner system
• For base mounting in standard drawer boxes or
on pull out shelf
• System consists of a bin frame, bin sizes to suit
and a lid shelf
• Frames sizes for cabinet widths 500, 600 and
800 mm
• Installed height: 466 mm
• Waste bins are made of high quality plastic with
an extra smooth surface and are therefore easy
to clean
• Lid offers additional storage space above the bins
• Bin frames and lid shelf are made of double
powder coated metal with protective enamel,
grey finish, bins are light grey plastic
• Total capacity: 49, 56 or 77 litres
• Other frame sizes are available for cabinet widths
from 400 to 900 mm with bin capacities varying
from 10 to 28 litres - information on request
Order qty: 1 set
600
500
800
500 width
500 depth
600 width
500 depth
1 x 21litres
1 x 21litres
1 x 28litres
1 x 28litres
800 width
500 depth
1 x 28litres
1 x 28litres
1 x 21litres
Photo shows 600 mm wide cabinet with 2x 10 litre bins and 1x 28 litre bin - information available on request. Drawer box and runner not included.
29
1
Waste BinsEuro-Cargo-S and CargoSoft G Waste Bins
For cabinet width Bin included Cat. No.
300 mm 1x 30 litre bin 502.73.940
Euro-Cargo-S single waste bin
• For door front fixing cabinets, for side wall
mounting in cabinets
• Designed to be withdrawn from the cabinet
whilst the lid remains inside for use as shelf
• With ‘soft control’; self-closing and
dampening mechanism on runners
• Installed height x depth:
427 x 403 mm
• For cabinet board thickness 16-19 mm
with 3 mm adjustability either side
• Silver epoxy coated steel bin holder,
mounting components, runners and lid and
light grey plastic bin
• Total capacity: 30 litres
Order qty: 1 pc
Fixings
included
soft
control
300
For cabinet width Bins included Cat. No.
450 mm 2x 19 litre bins 502.73.901
500 mm 1x 30, 1x 19 litre bins 502.73.904
600 mm 2x 30 litre bins 502.73.902
Euro-Cargo-S waste bin
• For door front fixing cabinets, for side wall
mounting in cabinets
• Designed to be withdrawn from the cabinet
whilst the lid remains inside for use as shelf
• With ‘Smooth Tec’; self-closing and
dampening mechanism on covered runners
• Installed height x depth:
427 x 449 mm
• For cabinet board thickness 16-19 mm with
3 mm adjustability either side
• Silver epoxy coated steel bin holder,
mounting components, Grass runners and
lid and light grey plastic bins
• Total capacity: 38, 49 or 60 litres
Order qty: 1 pc
SmoothTec
Fixings
included
450
500
600
For cabinet width Bins included Cat. No.
300 mm 1x 15, 1x 10 litre bins 502.73.961
CargoSoft G waste bin
• For door front fixing cabinets, for side wall
mounting in cabinets
• Designed to be withdrawn from the cabinet
whilst the lid remains inside for use as shelf
• With ‘Smooth Tec’; self-closing and
dampening mechanism on covered runners
• Installed height x depth:
387 x 449 mm
• For cabinet board thickness 16-19 mm with
3 mm adjustability either side
• Silver epoxy coated steel bin holder,
mounting components, Grass runners and
lid and light grey plastic bins
• Total capacity: 25 litres
Order qty: 1 pc
SmoothTec
Fixings
included
300
Catalogue shows...‘403 mm’Correct installed depth is 449 mm
Catalogue shows...‘403 mm’Correct installed depth is 449 mm
14.11.11/2*
30
Drawer InsertsCuisio Cutlery Inserts
Cuisio cutlery tray set
• 423 mm deep, to suit 450 mm deep DWD
and similar drawer boxes as well as Blum
TANDEMBOX
• For 15/16 and 18/19 mm board thickness
(variable soft edges)
• 58 mm height
• Insert layout varies with size
• Plastic insert, aluminium trim with frosted
insert, stainless steel trim with graphite insert
Width/For cabinet width Frosted green Frosted white Graphite
219 mm/300 mm 556.24.021 556.24.621 556.24.221
319 mm/400 mm 556.24.031 556.24.631 556.24.231
419 mm/500 mm 556.24.001 556.24.601 556.24.201
519 mm/600 mm 556.24.011 556.24.611 556.24.211
719 mm/800 mm 556.24.051 556.24.651 556.24.251
919 mm/1000 mm 556.24.081 556.24.681 556.24.281
Order qty: 1 set
Width
423
58
Insert layout
varies with size
Cuisio cutlery tray set
• 473 mm deep, to suit 500 mm deep DWD-
XP and similar drawer boxes as well as Blum
TANDEMBOX
• For 15/16 and 18/19 mm board thickness
(variable soft edges)
• 58 mm height
• Insert layout varies with size
• Plastic insert, aluminium trim with frosted
insert, stainless steel trim with graphite insert
Width/For cabinet width Frosted green Frosted white Graphite
219 mm/300 mm 556.90.030 556.90.730 558.90.330
319 mm/400 mm 556.90.031 556.90.731 558.90.331
419 mm/500 mm 556.90.033 556.90.733 558.90.333
519 mm/600 mm 556.90.034 556.90.734 558.90.334
719 mm/800 mm 556.90.035 556.90.735 558.90.335
919 mm/1000 mm 556.90.037 556.90.737 558.90.337
Order qty: 1 set
Width
473
58
Insert layout
varies with size
End piece
• For use on the side of the drawer inserts, when drawer is wider than
cutlery insert and only 1 insert is required
• End piece must be used on the right hand side of the drawer insert
For inserts: Frosted green Frosted white Graphite
423 mm deep 556.24.071 556.24.671 556.90.390
473 mm deep 556.24.073 556.24.673 556.90.391
Order qty: 1 pc
For section width Cat. No.
100 mm 556.24.503
Knife block
• Holds 3 knives
• Height x depth x width: 44 x 53 x 93 mm
• For use only with 100 mm wide sections of drawer insert, to be
placed underneath the aluminium trims
• Light grey plastic
Order qty: 1 set
For section width Cat. No.
150 mm 556.24.504
Knife block
• Holds 4 knives
• Height x depth x width: 44 x 53 x 143 mm
• For use only with 150 mm wide sections of drawer insert, to be
placed underneath the aluminium trims
• Light grey plastic
Order qty: 1 set
31
Drawer InsertsCuisioFLEX Drawer Inserts
CuisioFLEX drawer inserts
For organising plates, dishes, pots, pans, packets, jars and
other kitchen items.
Telescopic design makes these inserts exceptionally flexible
and can be used in all popular drawer sizes and styles.
236 - 386
236 - 386
129
25
White corners Frosted white mid sections
Set of 2 556.81.772
Set of 3 556.81.773
CuisioFLEX drawer insert set
• Set of two or three expandable plastic
frames, with non-slip feet
• 236-386 mm deep/wide, for use in all
popular drawer sizes and styles
• Set of 3 suitable for min. 800 mm drawer
widths
• Corners in white, middle sections in frosted
white
Order qty: 1 set
236 - 386
236 - 386
129
25
Aluminium-grey corners Mid sections
frosted green frosted white frosted graphite
Set of 2 556.81.502 556.81.572 556.81.532
Set of 3 556.81.503 556.81.573 556.81.533
CuisioFLEX drawer insert set
• Set of two or three expandable plastic
frames, with non-slip feet
• 236-386 mm deep/wide, for use in all
popular drawer sizes and styles
• Set of 3 suitable for min. 800 mm drawer
widths
• Corners in aluminium-grey, middle sections
in frosted green or white
Order qty: 1 set
32
Pull Out FittingsBuilt-in and Wall Mounting Ironing Boards
We reserve the right to alter specifications without notice. Dimensions in mm
D
37 mm
32 mm
25 - 50 mm
E
416 mm
max 19 mm
Internal installation
width 362 - 500 mm
Internal
cabinet
depth
500 mm
950
300
D 20 mm 30 mm 40 mm 50 mm
E 86 mm 76 mm 66 mm 66 mm
Dimensions required for flush fitting worktop
B Ironfix wall mounting ironing board
• Available with or without covering hood
• With turning mechanism; swivel range 180°
• Can be locked in left, right or inclined position
• Complete set comprises;
1 wall mounting bracket
1 folding support
1 folding ironing board
1 ironing board cover
fixing materials
operating and mounting instructions
• White (RAL 9016) plastic-coated steel ironingboard
• White and grey striped cotton cover with a foamlining and an elastic gathering to ensure a goodfit
• White (RAL 9016) polystyrene covering hood
• Replacement covers are available
Type Cat. No.
Ironing board without hood 568.66.700
Ironing board with hood 568.66.710
Replacement cover for ironing board
568.60.907
Order qty: 1 pc
326
185950
300985
525
595
140365
Covering hood
A Ironfix built-in ironing board
• For installation in the drawer space of most stan-dard base cabinets
• When the drawer is opened the supports auto-matically extend
• Hinging front section permits trousers and shirtsto be pulled easily over the board
• Internal cabinet width required; 362 - 500 mm
• Cabinet depth required; minimum 500 mm
• Complete set comprises;
2 cabinet rails
1 collapsible ironing board support system withpre-assembled 2-part extending runners
1 folding ironing board
1 ironing board cover
fixing materials
operating and mounting instructions
• White (RAL 9016) plastic-coated steel ironingboard and sleeve arm
• White and grey striped cotton cover with a foamlining and an elastic gathering to ensure a good fit
• If required please order sleeve arm separately
• Replacement covers are available
Item Cat. No.
Ironfix built-in ironing board 568.60.710
Replacement cover for ironing board
568.60.907
Sleeve arm 568.61.700
Replacement cover for sleeve arm
568.60.916
Order qty: 1 pc
•
07.03.11/1
33
420 deep, to suit 450 mm deep drawer
Insert width/To fit drawer width Cat. No.
474 mm/600-1200 mm 556.98.360
470 mm deep, to suit 500 mm deep drawer
Insert width/To fit drawer width Cat.No.
474 mm/600-1200 mm 556.98.361
Drawer InsertsDeep Drawer Inserts
17015080
Depth
234140 140
175
15
423
Width
50
Expanding deep drawer kitchen insert set
• For 600-1200 mm drawer widths - for drawer widths wider than
600 mm there will be spaces left in between the inserts for storage
of e.g. tins, packets.
• Two versions available:
For 450 or 500 mm deep drawers
• Set comprises:
1x Centre drawer box, divided into four sections
2x Storage jar holders
6x Storage jars, for insertion in holders, clear acrylic with beech lids
• Clear lacquered solid beech drawer box and jar holders
Order qty: 1 set
Plate stack drawer insert
• For drawer widths 600, 800, 900, 1000 and 1200 mm
• With either 9x, 10x or 15x Ø 25 mm pegs included
• 423 mm deep insert with 50 mm deep strip, to suit either 450 mm
or 500 mm deep drawer. Discard strip for 450 mm deep drawer
• Clear lacquered european oak or light beech plywood
Spare peg set (6 pegs per set) European oak Light beech
Cat. No. 556.98.490 556.98.390
Order qty: 1 set
To suit 450 mm and 500 mm deep drawer
Insert width To fit drawer width European oak Light beech
493 mm 600 mm (9 pegs) 556.98.492 556.98.392
693 mm 800 mm (9 pegs) 556.98.493 556.98.393
793 mm 900 mm (9 pegs) 556.98.494 556.98.394
893 mm 1000 mm (10 pegs) 556.98.495 556.98.395
1093 mm 1200 mm (15 pegs) 556.98.496 556.98.396
34
Drawer InsertsUtensil Holder Drawer Inserts
Utensil holder drawer insert
• For 500 mm drawer width
• 423 mm depth, to suit 450 mm deep drawer
• To suit 500 mm deep drawer order 50 mm
back block separately
• 10 accessories included, as shown, stainless
steel with black rubber grip, dishwasher proof
• Rustic beech, clear lacquered
To fit drawer depth/ Order Cat. No.
450 mm/ Insert, 423 mm 556.96.355
500 mm/ Insert and Back block 556.96.355 and 556.96.396
Order qty: 1 pc
Utensil holder drawer insert
• For 600 mm drawer width
• 423 mm depth, to suit 450 mm deep drawer
• To suit 500 mm deep drawer order 50 mm
back block separately
• 12 acessories included, as shown, stainless
steel with black rubber grip, dishwasher proof
• Rustic beech, clear lacquered
To fit drawer depth/ Order Cat. No.
450 mm/ Insert, 423 mm 556.96.357
500 mm/ Insert and Back block 556.96.357 and 556.96.397
Order qty: 1 pc
405
405
423
50
26
Back block
Insert
505
505
423
50
26
Back block
Insert
Insert 556.96.357 shown in photo above
+ + + +
+ +
35
To suit Grass DWD drawer boxes
Width / For cabinet width 423 mm depth 473 mm depth
301 mm / 400 mm 556.41.303 556.41.323
401 mm / 500 mm 556.41.305 556.41.325
501 mm / 600 mm 556.41.307 556.41.327
701 mm / 800 mm 556.41.308 556.41.328
801 mm / 900 mm 556.41.309 556.41.329
901 mm / 1000 mm 556.41.310 556.41.330
To suit Blum drawer boxes
Width / For cabinet width 423 mm depth 473 mm depth
314 mm / 400 mm 556.41.343 556.41.363
414 mm / 500 mm 556.41.345 556.41.365
514 mm / 600 mm 556.41.347 556.41.367
714 mm / 800 mm 556.41.348 556.41.368
814 mm / 900 mm 556.41.349 556.41.369
914 mm / 1000 mm 556.41.350 556.41.370
Drawer InsertsAnthracite Plastic Cutlery Inserts
4
3.6
5
Anthracite plastic and beech cutlery inserts
Anthracite cutlery inserts with optional beech or anthracite
plastic holders and trays.
For drawer width 400 mm
*Not for use with beech
and plastic inserts below
For drawer width 500 mm
*Not for use with beech
and plastic inserts below
For drawer width 600 mm
501/514401/414
423 423 423
301/314
473473 473
For drawer width 800 mm For drawer width 900 mm
423
701/714
473
For drawer width 1000 mm
423
801/814
473
423
901/914
55
473
For drawer depth Beech spice jar insert Beech knife block insert Plastic spice jar insert Plastic knife block insert
450 mm 556.39.240 556.39.261 556.39.341 556.39.360
500 mm 556.39.250 556.39.271 556.39.351 556.39.370
Spice jar and knife block inserts
• Lacquered beech or anthracite plastic
Order qty: 1 pc
Cutlery insert, anthracite plastic
• 55 mm height
• For cabinets widths 400-1000 mm with 18/19 mm board thickness
• Six widths available, to suit either Grass DWD drawer boxes or Blum
drawer boxes
• Two depths available, 423 mm to suit 450 mm or 473 mm to suit
500 mm deep drawer boxes
• 2 x sealing strips included
• Anthracite plastic inserts
• Grey profile sealing strips are included
Order qty: 1 set
Length 1.0 m
Cat. No. 556.39.599
Decorative and sealing profile
• Lengths included with inserts, but available
separately in 1.0 m roll if required
• Grey plastic
Order qty: 1 set
128
428
40
128
358
40
118
42
348
118
42
418
118
418
48
118
348
48
125
38
125
38
430
355
*Please note:
Beech and plastic spice jar and knife block inserts,
are not suitable for use in inserts for 400 mm or
500 mm cabinet widths.
36
New Premea Glassline range now availableFrosted or clear glass side panels as standard
ZEN ROOMSINTERIORS FOR INNER PEACE
www.zen-rooms.com
0844 772 6767