Power Switches

Power Meter Switches

Energy Meters

Dimmer Switches

Light Switches

Light Dimmer Switches

Scenerio and Appliance Control Switches

Light Sensors

Thermostats and Temperature Sensors

Shutter Controllers

Relay Controllers and DI/DO Modules

Repeater / Routers

Remote Controls

Door Contacts

Motion Sensors

Shock and Glassbreak Sensor

Smoke Detectors

Smoke and Heat Detectors

Environmental Sensors

Indoor Sirens and Chimes

Outdoor Bell Box

Remote Keypads and Tag Readers

Panic Buttons

Others

1

2

3

4

6

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

• Enables the user to remotely turn on/off power circuit breakers in a power distribution cabinet• Measures, monitors, and reports the energy consumption of the power distribution cabinet• Can be installed in a power distribution cabinet on a DIN rail• One input connector and one output connector• Power Supply: 110V and 230V• Dimensions: 90.2mm x 36.3mm x 57.5mm (PSM-DIN2-ZBS) 90.2mm x 53mm x 57.5mm (PSM-DIN3-ZBS)

• Maximum load: 1760W 16A/110V or 3680W 16A/230V (PSM-DIN2-ZBS) 3300W 30A/110V or 6900Q 30A/230V (PSM-DIN3-ZBS)

PSM-DIN2/3-ZW DIN Rail Power Meter Series

E-Meter-ZW Energy Meter Series• Measures, monitors, and reports the energy consumption of a household from the electricity meter• Wireless and lightweight for easy installation• Reports collected data to the control panel at regular intervals• High stability and sensitivity• LED status indicator• Low battery consumption• Dimensions: 90mm x 46mm x 30mm

Clamp-Meter-ZW Clamp Meter Series• Measures and reports the energy consumption of an entire household or apartment complex• Lightweight and easy to install in an standard electric box or braker panel• Monitor the total amount of electricity used and generate energy history over the day/week/month• High stability and sensitivity• LED status indicator• Dimensions: 93mm x 65.5mm x 33mm (with bracket)

Energy Meters

• Controls the on/off status of permanently installed lights• Provides remote on/off control via a Z-Wave network and manual on/off control• Two-way switch (one switch and one load)• Power supply: 110-230V, 50/60Hz• Maximum load: 5A• Connects to neutral, load and line wires• May be used in a new installation or replace an existing wall switch

• Controls the on/off status of permanently installed lights• Provides remote on/off control via a Z-Wave network and manual on/off control• Two-way switch (one switch and one load)• Battery type: 3.6V NiMh 200 mAH battery pack x1• Maximum load: 5A• Connects to traveler, load and line wires• May be used in a new installation or replace an existing wall switch

North American modelTouch Switch Style

European modelTouch Switch Style

North American model

European model

North American model

European model

European model

North American model

• Controls the on/off status of two permanently installed lights• Provides remote on/off control via a Z-Wave network • Manual on/off control via its touchscreen switch• Two-way switch (one switch and two load)• Power supply: 110-230V, 50/60Hz• Battery type: 3.6V NiMH 200 mAH battery pack (LS-2A/E-B-ZW only)• Maximum load: 5A• Connects to load and line wires• May be used in a new installation or replace an existing wall switch

North American modelTouch Switch Style

• Controls the on/off status and brightness level of permanently installed incandencent dimmers• Provides remote on/off and lighting level adjustment control via a Z-Wave network• Manual on/off and +/- lighting level adjustment control via its touchscreen switch• Power supply: 110-230V, 50/60Hz• Maximum load: 2.5A• Connects to neutral, load, and line wires• LED indicates the switch location in a dark room• May be used in a new installation or replace an existing wall switch

• Controls the on/off status and brightness level of permanently installed incandencent dimmers• Provides remote on/off and lighting level adjustment control via a Z-Wave network• Manual on/off and +/- lighting level adjustment control via its touchscreen switch• Power supply: 110-230V, 50/60Hz• Maximum load: 2.5A• Connects to neutral, load, and line wires• LED indicates the switch location in a dark room• May be used in a new installation or replace an existing wall switch

• Controls the on/off status and brightness level of two lights groups independently of each other• Provides remote on/off and lighting level adjustment control via a Z-Wave network• Manual on/off and +/- lighting level adjustment control via its touchscreen switch• Power supply: 110-230V, 50/60Hz• Maximum load: 2.5A• Connects to neutral, load, and line wires• LED indicates the switch location in a dark room• May be used in a new installation or replace an existing wall switch

• Facilitate the use of four pre-programmed scenario condition• Two-way communication• Power source: AAA batteries x2• No wiring required to install quickly and easily• For indoor use only• Suitable in new or retrofit home installation• CE/FCC compliance

• Provides automatic appliance control according to lighting, temperature, and humidity conditions• Monitors variations in light intensity in visible light sources• Detects temperature from 14°F to 122°F (-10°C to 50°C)• Detects humidity range from 0 to 100% RH• Periodic transmissions at intervals of 10 minutes; or when temperature change +/-3°F (+/-2°C); or when humidity changes by 10% RH• Low power consumption• Easy installation• CE compliance

• Detects temperature from 14°F to 122°F (-10°C to 50°C)• Reports temperature to the control panel at regular intervals• Powered by a lithium battery for easy installation• Low battery detection• Power Source: 3V CR2 Lithium battery x1

• Detects temperatures from 14°F to 122°F (-10°C to 50°C) and humidity from 0% to 100% RH• Reports collected data every 10 minutes or when temperature fluctuates by +/-3°F (+/-2°C) or when humidity changes by 10% RH• Easy switch between Fahrenheit and Celsius degrees• LCD displays current temperature and humidity levels• High stability and sensitivity• Backlight for convenient operation in the dark• Power Supply: AA battery x 2

• Automatic control of air conditioning and heating systems• Intuitive interface with four-button design for easy operation• User-friendly remot management via smartphone app and web browser• Easy switch between Celsius and Fahrenheit degrees• Temperature alerts will be activited if temperature fluctuates by +/-3°F (+/-2°C)• Indoor air quality support (humidification, dehumidification, and ventilation)• Works with single state or multi-stage heating and cooling systems• Power supply: AC 24V, 50/60Hz

Shutter Controllers

Relay Controllers and DI/DO Modules

XE-1ZW DI/DO Module• One digital input (DI) and one digital ouput (DO)• Dry contact input indicates two conditions: “Open” means “Normal” and “Closed” signifies “Alarm/Status”• Actives remote field devices that are difficult or cost-prohibitive to reach• Saves cabling efforts between the trigger and the control panel• CE compliance

• Provides convenient opening and closing of home facilities, including pool covers, gas valve, water valve, or sprinkler systems, etc.• Wireless operation of any device controllable by an SPDT relay• Allows relay activation events to be integrated with other home automation scenes• One NO/NC contact• Suitable for new or retrofit home installation• Power supply: 110-230V AC• CE compliance

• Provides convenient opening and closing of home facilities, including pool covers, gas valve, water valve, or sprinkler systems, etc.• Wireless operation of any device controllable by an SPDT relay• Allows relay activation events to be integrated with other home automation scenes• One NO/NC contact• Suitable for new or retrofit home installation• Power supply: 12-24V AC• CE compliance

• Provides convenient opening and closing of home facilities, including pool covers, gas valve, water valve, or sprinkler systems, etc.• Wireless operation of any device controllable by an SPDT relay• Allows relay activation events to be integrated with other home automation scenes• One NO/NC contact• Suitable for new or retrofit home installation• Power supply: 5V DC• CE compliance

PRL-1ZW-5V Z-Wave Relay Controller

PRL-1ZW-12V/24V Z-Wave Relay Controller

PRL-1ZW-AC Z-Wave Relay Controller

RM-29ZW Repeater Router with USB Power Adapter• Extends Z-Wave network into hard-to-reach places• Dual USB power adapter output• Interchangeable plug design• Plugs directly into a standard power outlet for easy installation• Small and compact design• Suitable for residential and commer commercial premises

Repeater / Routers

RM-23ZW Repeater Router with Battery Backup• Extends Z-Wave system’s wireless communications range• Extends Z-Wave network into hard-to-reach areas• Plugs into a standard power outlet for easy installation• Backup battery: 600mAh NiMH AAA rechargeable battery pack

DC-23ZW / DC-23R3-ZW Door Contact• Monitors the opening/closing of a door or window• Powered by a pre-inserted lithium battery for easy installation• Extension terminals for connection to wired devices• Doubles as a universal transmitter• Mounted on door or window frames• Tamper protection• Low battery detection

DCSV-18ZW Door Contact with Shock Sensor• Two modes of detection in one sensor• Detects shocks produced by forced entries• Monitors the openings/closings of doors or windows• Four adjustable sensitivity levels• Two tamper switches for sabotage detection• Built-in reed switch• Power: 3V CR123A Lithium battery x1• Option of high-power and lower-power models

• Monitors the opening/closing of a door or window• Doubles as an universal transmitter• Extension terminals for connection to wired devices• Powered by a pre-inserted lithium battery• Built-in reed switch• Tamper protection

Mini-PIR-ZW Mini Motion Sensor

IR(P)-9ZW (Pet-Immune) Motion Sensor

IR(P)-16ZW (Pet-Immune) Motion Sensor• Detects suspicious movements by passive infrared technology• Microprocessor-controlled with advanced Adaptive Digital Signal Processing (ADSP) algorithms• Pet immunity up to 27kg (59lbs) (IRP-16ZW only)• Two selectable sensitivity levels• Detection range: 12 meters over a 110° angle• Powered by a pre-inserted lithium battery for easy installation• Automatic power saving mechanism• Temperature compensated sensitivity control

• Detects suspicious movements by passive infrared technology• Microprocessor-controlled with advanced Adaptive Digital Signal Processing (ADSP) algorithms• Pet immunity up to 27kg (59lbs) (IRP-9ZW only)• Detection range: 12 meters over a 110° angle• Powered by a pre-inserted lithium battery for easy installation• Automatic power saving mechanism• Temperature compensated sensitivity control

Mini-PIR-B-ZW Mini-PIR-E-ZW

• Detects suspicious movements by passive infrared technology• Built-in temperature sensor measures environment temperature • Built-in light sensor monitors variations in light intensity and supports custom scene creation• Small size, lightweight, and wall/surface mount bracket for flexible installation• Automatic power saving mechanism• Temperature compensated sensitivity control• Battery Type: CR123A lithium battery x1• Dimensions: Ø 50mm x 55mm (Mini-PIR-B-ZW) Ø 48.7mm x 57mm (Mini-PIR-E-ZW)

Shock and Glassbreak Sensors

• Detects shock and glass break• Works on any glass surface• Adjustable vibration detection sensitivity -- low, medium and high• Wireless, stick-on sensor• LED indicator for settings• Low battery indicator• Periodic supervisory signals check system integrity• Dimensions: Ø 40mm x 14mm

• Detects glass break and vibration• Senses the sound of a variety of glass (tempered, wired, laminated, ordinary plate, etc.)• Mounted on wall or ceiling• Selectable sensitivity settings• Low battery consumption• Easy installation• High reliability and sensitivity• LED indicator for settings

SHGS-1ZW Shock & Glassbreak Sensor

ACGS-23ZW Acoustic Glassbreak Sensor

SAMS-1ZW Fire Alarm Audio Monitor Sensor• Monitors existing UL smoke detectors• Mounted on wall or ceiling within a 15cm range from a UL smoke detector• Cost-effective and easy way to add fire alarm monitoring• Wireless and lightweight for easy installation• Small, elegant design

Mini-SD-ZW Mini Smoke & Heat Detector• Photoelectric sensor detects smoke• Built-in temperature sensor to detect heat and measures environment temperature• Built-in PIR motion sensor detects movements and supports custom scene creation• Small size, lightweight, and flexible to install• Siren output level is 85dB at 3 meter• Auto-calibration to readjust its detection threshold value• EN 14604 compliant• Dimensions: 79.5mm x 79.5mm x 33.5mm

SDT-16ZW Smoke Detector with Temperature Sensor

WLS-15ZW Water Leakage Sensor

SR-15ZW Indoor Siren

• Siren output level: 105dB at 1 meter• Sound notification of arming/disarming/low battery status• Unique alarm sounds for fire and burglary• Lightweight and flexible to install• IPX5 waterproof• Battery type: 1.5V D Alkaline batteries x 2• Dimensions: 212.5mm x 179mm x 53mm

Indoor Sirens and Chimes

• Multi-functional AC-Powered Indoor Siren and door bell chime• Built-in speaker with voice prompt messages• Three selectable volume levels for voice prompt and chime• Emit door bell chimes, entry/exit beeps, and voice prompt messages• Siren output: 95dB at 1 meter• Plugs into any standard power outlet for quick and simple installation• Doubles as a Z-Wave network repeater / router (SRV-23ZWR only)• Provides rechargeable battery backup (SRV-23B-ZW only)

• Siren output level: 105dB at 1 meter• Different alarm sounds for fire and intrusion• Receives signals from the control panel to emit entry and exit delay beeps• Transmits low battery and supervisory signals• Cover tamper protection prevents unauthorized removal• Power Source: 1.5V D Alkaline batteries x 4

SR-32ZW Indoor Siren

SRAC-23ZW AC-Powered Indoor Siren Series• AC-Powered Indoor Siren• Plugs into any standard power outlet for easy installation• Siren output: 95dB at 1 meter• Doubles as a Z-Wave network repeater / router (SRAC-23ZWR only)• Provides rechargeable battery backup (SRAC-23B-ZW only)• Multipurpose to activate the alarm sound or emit entry/exit delay beeps• Two selectable volume levels• Transmits AC power failure, low battery, and supervisory signals

SRV-23ZW Indoor Siren and Chime

• Siren output level: 105dB at 1 meter• Sound notification of arming/disarming/low battery status• Unique alarm sounds for fire and burglary• LED strobe light• Lightweight and flexible to install• IPX5 waterproof• Battery type: 1.5V D Alkaline batteries x 2• Dimensions: 212.5mm x 179mm x 53mm

Outdoor Bell Box

BX-15ZW Outdoor Bell Box

BX-32ZW Outdoor Bell Box

• Siren output level: 105dB at 1 meter• High-powered strobe light (choice of red/orange/white lens)• IPX5 waterproof and UV resistant housing• Unique alarm sounds for fire and burglary• Squawk notifications of arming, disarming, and low battery status• Cover tamper protection prevents unauthorized removal and vandalism• Power Source: 1.5V D Alkaline batteries x 4

• Arm and disarm security systems• Integrates six proximity or NFC tags• IPX4 waterproof standard• LED indicator for system mode• Sleep mode for power-saving operation• Easy installation• Tamper protection• Low battery detection

• Big red HELP button for quick identification and activation• LED indicates the transmission of alarm signals• IPX6 water resistant rating• Periodic supervisory signals check system integrity• Dimensions: 85mm x 85mm x 22mm• Low battery indicator• Long battery life

• White cord with a loop for pulling• Wall mount or ceiling mounted for easy accessibility• Low maintenance and low battery consumption• Extra means to raise an alarm when needed

PCU-3ZW Pull Cord Unit

July 20, 2016Copyright © 2016 Climax Technology Co., Ltd. All Rights Reserved.