Yarde Metals Shapes Catalog
description
Transcript of Yarde Metals Shapes Catalog
Table Of Contents
AluminumCommon Alloy Sheet Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 9 Sheet: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 23Plate: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 - 31Circles: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 - 34 Heat Treatable Sheet Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 - 40Cast Tooling Plate Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Mold Plate Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Sheet: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 - 53 Plate: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 - 81
StainlessAustenitic 300 Sheet Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 - 83Martensitic & Ferritic 400 Sheet Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 - 85Precipitation Hardening Sheet Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86Sheet: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 - 98 Plate: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99 - 107
CarbonSteel Sheet Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108Sheet: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 - 115 Steel & Alloy Plate Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116Plate: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 - 121
Copper/BrassSheet & Plate Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122
Sheet & Plate: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 - 124
PagesSHEET & PLATE
ROD & BARAluminum
Rod & Bar Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125 - 126
Machinability Comparison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127
Rounds: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128 - 153
Hexagons: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154 - 157
Squares: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158 - 164
Rectangles: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165 - 189Stainless
Austenitic 300 Rod & Bar Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . .190 - 192Martensitic & Ferritic 400 Rod & Bar Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . .193 - 194Precipitation Hardening Rod & Bar Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195Machinability Comparison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196Machining Speeds & Feeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197 - 200Rounds: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201 - 242Hexagons: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243 - 250Squares: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .251 - 253Flats: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254 - 276
CarbonRod & Bar Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .277 - 278
Machinability Comparison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279
Rounds: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280 - 293Hexagons: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294 - 297Squares: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298 - 299Flats: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 - 322
Copper MetalRod & Bar Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .323 - 324Rounds: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 - 336Squares: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .327Rectangles: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .328 - 333
BrassRounds: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337 - 354Hexagons: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .341 - 342Squares: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343 - 344Rectangles: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .345 - 350
Bearing Bronze: 932 solid & hollow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .355 - 356
STRUCTURALAluminum
Structural Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .421 Angles: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 422 - 428Channels: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429 - 432 Beams: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433 - 435Tees & Zees: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 436 - 437Handrail: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .438
StainlessStructural Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .439Angles: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 440 - 442Channels: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 442
CarbonStructural Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .443
Angles: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 444 - 446
Channels: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 447 - 449
Beams: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450 - 454
Tees: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 455
Pages
AluminumTube & Pipe Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .357
Round: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358 - 374
Pipe: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375 - 377
Square: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 378 - 380
Rectangle: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381 - 383
StainlessTube & Pipe Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .384
Round: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 385 - 389
Pipe: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .391
Square: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 392 - 394
Rectangle: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395 - 397
Reference Guide, Decimal Equivalents & B.W.G Gauges . . . . . . . . . . . . . . . . .. . . . . . . . . 390
CarbonTube & Pipe Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .398 - 399Round: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 - 408Pipe: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .409 - 410
Square: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .411 - 414
Rectangle: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .415 - 420
TUBE & PIPE
PROCESSING & DATAAluminum
General Alloy Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 456
Definitions for Sheet & Plate, Rod & Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 457
Temper Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .458
Thermal Process for H tempers, T tempers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 459 - 462
Tolerances: Sheet & Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 463 - 465
Rod & Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 466 - 472
Stainless SteelMelting Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 473
Tolerances: Rod & Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .474 - 475
Sheet & Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 476
Carbon SteelTolerances: Rod & Bar . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . 477
Sheet & Plate . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . 478
Brass & CopperTolerances: Rod & Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 479
Sheet & Plate . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . 479
Terms & Conditions of Sale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .480 - 482
SHEET & PLATESHEET & PLATESHEET & PLATE
YARDE METALS
SH
EE
T A
ND
PLA
TE
SHEET & PLATEAluminum
Common Alloy Sheet Guide . . . . . . . . . . . . . . . . . 5 - 9
Sheet: 1100, 3003, 5052, 5083, 5086 . . . . . . .10 - 22Anodized, Expanded Metal . . . . . . . . . . . . . . . . . . . . . .23
Plate: 1100, 3003, 5052, 5083, 5086 . . . . . . .24 - 29Diamond tread plate - bright . . . . . . . . . . . . . . . . 30 - 31
Circles: 1100, 3002 . . . . . . . . . . . . . . . . . . . . . .32 - 34
Heat Treatable Sheet Guide . . . . . . . . . . . . . . . . 35 - 40Cast Tooling Plate Guide . . . . . . . . . . . . . . . . . . . . . . 41Mold Plate Guide . . . . . . . . . . . . . . . . . . . . . . . . . .42
Sheet: 2024, 6061, 7075 . . . . . . . . . . . . . . . . . 43 - 53(bare, Alclad & mill finish)
Plate: 2014, 2024, 6061 . . . . . . . . . . . . . . . . .54 - 67Diamond tread plate- mill finish . . . . . . . . . . . . . . . . . . 68
2014, 2124, 7050, 7075, 7475 . . . . . . . 69 - 77Mold Plate . . . . . . . . . . . . . . . . . . . . . . . . . .78Cast Tooling Plate . . . . . . . . . . . . . . . . 79 - 81
StainlessAustenitic 300 Sheet Guide . . . . . . 82 - 83
Martensitic & Ferritic 400 Sheet Guide . . . . . . 84 - 85
Precipitation Hardening Sheet Guide . . . . . . . . . 86
Sheet: 301, 304, 316L, 321 . . . . . . . . . . . . . . . 87 - 98
Plate: 303, 304/304L, 316/316L, 410, 17-4 . . .99 - 107 Diamond Floor Plate . . . . . . . . . . . . . . . . . . . . . . . . . .103
CarbonSteel Sheet Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Sheet: CR, HR P&O, Galvanized . . . . . . . . 109 - 113 Expanded Metal (flattened & standard) . . . . 114 - 115
Steel & Alloy Plate Guide . . . . . . . . . . . . . . . . . . . . 116
Plate: A 36, 4140, 4140 H.T. . . . . . . . . . . . 117 - 121
Copper/BrassSheet & Plate Guide . . . . . . . . . . . . . . . . . . . . . . . . .122
Sheet & Plate: 110, 260 . . . . . . . . . . . . . . . . . .123 - 124
Pages
5
ALUMINUM SHEET & PLATE GUIDE to
COMMON ALLOY
The non-heat treatable alloys attain maximum strength
beyond the annealed condition through cold work harden-
ing. In the H tempers of sheet and plate, this is initially the
result of cold rolling to final thickness, or may be the result
of subsequent cold forming. They possess high corrosion
resistance, good formability, pleasing appearance and
good weldability. They are widely used for manufactured
products and general sheet and plate applications.
ALLOY 1100
CORROSION RESISTANCE Is high in industrial and
marine atmospheres. Material is compatible with neutral,
fresh and sea waters. Also compatible with most foods,
gasoline, alcohol, ammonia and many neutral aqueous
solutions of inorganic salts.
FINISHING Produces satisfactory results in terms of
anodizing of chemical conversion. The material may be
polished prior to anodizing for a high luster or etched prior
to anodizing to produce a pleasing matte finish.
WELDING, BRAZING AND SOLDERING Can be accom-
plished by all the processes used to join any aluminum
alloy.
WORKABILITY Because of its ductility, is unexcelled by
any other commercial aluminum alloy, or most any other
commercial metal. Spun or drawn parts, which often
require several successive operations, are often times pro-
duced from 1100 without resorting to an intermediate
anneal.
TYPICAL END USES: Awnings, food and chemical han-
dling and storage equipment, furniture (lawn chairs, carts,
trays, etc.), name plates, outdoor display sign panels, roof-
ing, siding, ventilators, flashing, spun parts. Spun or drawn
parts which often require several successive operations are
often times produced from 1100 without resorting to an
intermediate anneal.
6
ALLOY 3003
CORROSION RESISTANCE In rural atmospheres is
excellent and in industrial and marine atmospheres the
resistance to corrosive attack is high. Alloy 3003
possesses good resistance to most neutral or nearly fresh
waters and sea water. Most foods and organic acids are
compatible with this alloy.
FINISHING Produces excellent results when mechanical
finishes are desired. The material will take chemical con-
version coatings and organic coatings as well as any alu-
minum alloy. Anodizing will produce a good adherent coat-
ing with the possibility of slight discoloration (brownish
cast) due to manganese.
WELDING May be done by all of the processes used to
weld aluminum. Brazing may be accomplished with the
torch, by using an automatic or manual controlled furnace
system or by employing a salt bath system. Soldering of
alloy 3003 presents no problems.
MACHINING Is hindered by the gummy characteristic of
the alloy.
STRENGTH Due to 1.2% manganese, is 20% higher than
1100. The increase in tensile strength, combined with ex-
cellent workability allows certain jobs to be done with 3003
which fail in fabrication using 1100 simply due to the latter's
low strength.
WORKABILITY Is excellent at either room or elevated tem-
peratures. Like 1100 this alloy lends itself to spinning,
drawing, impact extrusion and most other forms of metal
working.
TYPICAL END USES: Awnings, food and chemical
handling, storage equipment, furniture, name plates, out-
door display sign panels, roofing, siding, ventilators,
flashing and spun parts.
ALUMINUM SHEET & PLATE GUIDEto
COMMON ALLOY
7
ALLOY 5052
CORROSION RESISTANCE Is excellent. It is more
resistant to attack from salt water than alloy 1100. It also
resists attack by certain chemicals and most foods at room
and elevated temperatures.
FINISHING May be accomplished by all the standard
finishes, both mechanical and chemical, which may be
applied to any other aluminum alloy. However, anodizing
for any length of time produces an anodic coating with a
decidedly yellow cast attributable to the alloying con-
stituents of the alloy.
WELDING Is accomplished by all the processes used to
weld aluminum. The use of the inert gas shielded arc
method with either a tungsten or consumable electrode is
the recommended procedure for welding this as well as
other aluminum alloys. Brazing and soldering are difficult.
MACHINING, like 3003, will disclose a tendency toward
gumminess.
STRENGTH It is a strong and tough alloy whose major
constituents consist of 2.5% magnesium and 0.25%
chromium. This alloy has a higher endurance limit than
most other wrought aluminum alloys making it an excellent
selection for structures requiring high strength.
WORKABILITY Is affected by the relatively high magne-
sium content of this alloy; hence, the work hardening rate
is fairly high. Nonetheless, this material is well suited for
drawn shapes within its range of drawability. The material
may also be spun but will require frequent anneals to
achieve any major reduction.
TYPICAL END USES: Electronic panel parts, food
processing equipment, heavy-duty cooking utensils,
storage tanks, sheet metal products.
ALUMINUM SHEET & PLATE GUIDEto
COMMON ALLOY
8
ALLOY 5083
CORROSION RESISTANCE Excellent for general
industrial, marine atmospheres; however, the alloy is not
resistant to all media, especially if it is to operate at
elevated temperatures.
FINISHING Requires only the use of standard aluminum
techniques. Weldments requiring painting would also
require only standard treatment and preparation. Corrosion
resistant anodized finishes may be applied to this alloy
without difficulty. Generally 5083 is not recommended for
decorative anodic finishes, since the coating would be
quite cloudy or muddy in its appearance.
WELDABILITY Excellent by arc and resistance methods.
Good quality welds can be made in the flat and overhead
positions at high welding speeds and without the need for
preheating. High weld efficiency plus ductility are
characteristics of the alloy. This material is not considered
brazeable.
STRENGTH Alloy 5083 is a magnesium aluminum alloy
designed for welded structures requiring maximum joint
strength and efficiency coupled with the natural lightweight
and corrosion resistance characteristic of aluminum and its
alloys.
WORKABILITY of the alloy is increased by using elevated
temperature forming at 400 F or above. Forming tempera-
tures should not be allowed to exceed 700 F; further, any
material which is subjected to temperatures of 600 to
700 F will be in the annealed condition. Formability is of a
lower order than for any other aluminum alloy of the non-
heat treatable group. A limited amount of cold bending
may be done provided the bend radii are large enough and
the tools are in good condition with smooth edges for the
metal to work over.
TYPICAL END USES: Containers, cranes, truck bodies,
girders, marine, railroad cars, structurals.
ALUMINUM SHEET & PLATE GUIDEto
COMMON ALLOY
9
ALLOY 5086
CORROSION RESISTANCE Excellent with regard to gen-
eral corrosion and pitting corrosion. In this connection, the
material behaves much like alloy 5052. Further, 5086
demonstrates an excellent resistance to stress corrosion in
the presence of highly corrosive elements at temperatures
150 F and below. The H116 temper is used for marine
service for resistance to intergranular and exfoliation
corrosion.
FINISHING Requires only the use of standard aluminum
techniques. Corrosion resistant anodized finishes may be
applied to this alloy with no difficulty. Generally, 5086 is
not recommended for decorative anodic finishes, since the
coating would be quite cloudy or muddy in its appearance.
WELDABILITY is excellent. In the annealed condition,
5086 has a tensile strength 40% higher than 5052. The
ductility of the welded material is high. This alloy is not
considered brazeable or solderable. Strength and ductility
in the as welded condition are better than possible with
heat treatable alloys.
MACHINABILITY is good. High speeds with fine to
medium feeds and generous lubrication will produce
generally good results.
WORKABILITY is less than that of 5052. It may be used
for moderate draws and major bending and forming
operations in the annealed state and moderate bending
and forming applications in other tempers. The workability
of 5086 may be extended by using an elevated tempera-
ture of forming and spinning operations. A hot working
temperature of 400 F is recommended for best results.
TYPICAL END USES: Aircraft fuel tanks, cryogenics
(low temperature) applications, marine hulls and structural
applications (ship and boats), materials handling
equipment, oil field piping, ordinance application, truck
and tank trailer structurals and welded assemblies.
AALUMINUM SHEET & PLATE GUIDE to
COMMON ALLOY
10
ALUMINUM SHEETNon-Heat Treatable
1100-0AMS QQ A 250/1 ASTM B 209
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
.032 x 48 x 96 .4608 14.75
48 X 120 .4608 18.43
.040 x 48 x 96 .5760 18.43
48 x 144 .5760 23.04
.050 x 48 x 96 .7200 23.08
48 x 120 .7200 28.80
48 x 144 .7200 34.56
.063 x 48 x 96 .9072 29.03
48 x 144 .9072 43.55
.080 x 63 x 126 1.1520 63.50
71.5 x 71.5 1.1520 40.90
.090 x 36 x 96 1.2960 31.10
48 x 144 1.2960 62.21
.125 x 48 x 144 1.8000 86.40
89.5 x 89.5 1.8000 100.13
.190 x 60 x 124 2.7360 141.36
60 x 146 2.7360 166.44
11
ALUMINUM SHEETNon-Heat Treatable
1100-H14AMS QQ A 250/1 ASTM B 209
Color: White
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
.032 x 36 x 96 .4520 11.06
48 x 96 .4520 14.75
48 x 120 .4520 18.43
48 x 144 .4520 22.12
.040 x 48 x 96 .5654 18.09
48 x 120 .5654 23.04
48 x 144 .5654 27.14
.050 x 48 x 96 .7055 22.57
48 x 120 .7055 28.80
48 x 144 .7055 33.86
.063 x 48 x 96 .8891 28.50
48 x 120 .8891 36.29
48 x 144 .8891 42.70
.080 x 48 x 96 1.1270 36.06
48 x 144 1.1270 54.10
.090 x 36 x 96 1.2740 30.58
48 X 96 1.2740 40.76
48 x 120 1.2740 51.84
48 x 144 1.2740 61.15
.100 x 48 x 96 1.4400 46.08
.125 x 36 x 96 1.7640 42.20
48 x 96 1.7640 56.45
48 x 120 1.7640 70.56
48 x 144 1.7640 84.70
60 x 120 1.7640 90.00
60 x 144 1.7640 105.80
63 x 126 1.7640 99.23
67.5 x 135 1.7640 113.90
.190 x 48 x 96 2.6850 87.55
48 x 144 2.6850 128.90
60 x 120 2.6850 136.80
60 x 144 2.6850 164.20
12
.063 x 41 x 143.50 .9072 37.07
59.25 x 118.50 .9072 44.23
.080 x 40 x 40 1.152 12.80
40 x 120 1.152 38.40
46 x 138 1.152 50.78
56 x 140 1.152 62.72
58 x 145 1.152 67.28
.118 x 65.25 x 130.75 1.700 100.60
.125 x 48 x 144 1.800 86.40
.138 x 63.15 x 126.55 1.976 110.28
.157 x 52.50 x 105.25 2.283 86.75
ALUMINUM SHEETNon-Heat Treatable
3003-0Est. lbs. Est. lbs.
THK Width Length per sq. ft. per sheet
13
.012 x 36 x 96 .1730 4.15
.016 x 36 x 96 .2280 5.47
36 x 120 .2280 6.91
48 x 96 .2280 7.37
48 x 120 .2280 9.22
48 x 144 .2280 11.59
.020 x 36 x 96 .2850 6.84
48 x 96 .2850 9.12
48 x 120 .2850 11.52
48 x 144 .2850 13.82
.025 x 36 x 96 .3560 8.55
48 x 96 .3560 11.52
48 x 120 .3560 14.40
48 x 144 .3560 17.28
.032 x 36 x 96 .4560 10.94
48 x 96 .4560 14.60
48 x 120 .4560 18.25
48 x 144 .4560 21.90
.040 x 36 x 96 .5700 13.82
48 x 96 .5700 18.25
48 x 120 .5700 22.81
48 x 144 .5700 27.37
.050 x 36 x 96 .7128 17.11
48 x 96 .7128 22.81
48 x 120 .7128 28.80
48 x 144 .7128 33.89
ALUMINUM SHEETNon-Heat Treatable
3003-H14AMS QQ A 250/2 ASTM B 209
Color: Green
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
14
.063 x 36 x 96 .8980 21.55
39 x 115 .8980 28.26
48 x 96 .8980 28.74
48 x 120 .8980 35.92
48 x 144 .8980 43.54
55 x 144 .8980 49.89
60 x 120 .8980 45.36
60 x 144 .8980 54.43
.080 x 36 x 96 1.1390 27.34
36 x 114 1.1390 32.83
36 x 144 1.1390 41.47
48 x 96 1.1390 36.45
48 x 120 1.1390 45.56
48 x 144 1.1390 54.67
54.75 x 140 1.1390 61.32
.090 x 36 x 96 1.2870 30.88
36 x 120 1.2870 38.80
48 x 96 1.2870 41.18
48 x 120 1.2870 51.48
48 x 144 1.2870 61.78
60 x 113 1.2870 61.02
60 x 120 1.2870 64.80
60 x 144 1.2870 77.76
.100 x 48 x 96 1.4260 45.63
48 x 120 1.4260 57.60
48 x 144 1.4260 68.45
ALUMINUM SHEETNon-Heat Treatable
3003-H14AMS QQ A 250/2 ASTM B 209
Color: Green
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
15
.125 x 36 x 96 1.7820 42.77
36 x 120 1.7820 54.00
48 x 96 1.7820 57.02
48 x 120 1.7820 71.28
48 x 144 1.7820 85.54
60 x 96 1.7820 72.00
60 x 120 1.7820 89.10
60 x 144 1.7820 106.90
.160 x 48 x 96 2.3040 73.73
48 x 120 2.3040 92.16
.190 x 36 x 96 2.7130 65.66
48 x 96 2.7130 86.82
48 x 120 2.7130 108.52
48 x 144 2.7130 130.22
60 x 120 2.7130 136.80
60 x 144 2.7130 164.20
ALUMINUM SHEETNon-Heat Treatable
3003-H14AMS QQ A 250/2 ASTM B 209
Color: Green
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
16
.020 x 36 x 96 .2794 6.70
36 x 120 .2794 8.64
48 x 96 .2794 8.94
48 x 120 .2794 11.52
48 x 144 .2794 13.82
.025 x 36 x 96 .3492 8.38
36 x 120 .3492 10.80
48 x 96 .3492 11.17
48 x 120 .3492 14.40
48 x 144 .3492 17.28
.032 x 36 x 96 .4470 10.73
36 x 120 .4470 13.82
48 x 96 .4470 14.75
48 x 120 .4470 17.88
48 x 144 .4470 21.46
60 x 120 .4470 22.35
60 x 144 .4470 26.82
60 x 240 .4470 46.08
.040 x 36 x 96 .5587 13.41
36 x 120 .5587 13.82
40 x 144 .5587 23.04
48 x 96 .5587 17.88
48 x 120 .5587 22.35
48 x 144 .5587 26.82
60 x 120 .5587 27.93
60 x 144 .5587 33.52
60 x 240 .5587 57.60
ALUMINUM SHEETNon-Heat Treatable
5052-H32AMS QQ A 250/8 ASTM B 209
Color: Purple
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
.050 x 36 x 96 .6980 16.76
36 x 120 .6980 21.60
36 x 144 .6980 25.92
40 x 104 .6980 20.80
48 x 96 .6980 22.34
48 x 120 .6980 27.94
48 x 144 .6980 33.50
52 x 120 .6980 31.20
53 x 115 .6980 30.48
53 x 153 .6980 40.55
60 x 120 .6980 34.92
60 x 144 .6980 41.90
60 x 240 .6980 72.00
.063 x 36 x 96 .8800 21.12
36 x 120 .8800 26.40
36 x 144 .8800 32.60
40 x 144 .8800 36.28
48 x 96 .8800 28.16
48 x 120 .8800 35.20
48 x 144 .8800 42.24
60 x 120 .8800 44.00
60 x 144 .8800 52.80
72 x 96 .8800 43.55
72 x 120 .8800 54.53
72 x 144 .8800 63.36
72 x 240 .8800 108.9
.071 x 48 x 96 1.0220 32.70
48 x 144 1.0220 49.05
ALUMINUM SHEETNon-Heat Treatable
5052-H32AMS QQ A 250/8 ASTM B 209
Color: Purple
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
17
18
.080 x 36 x 96 1.1170 26.81
48 x 96 1.1170 35.74
48 x 120 1.1170 44.68
48 x 144 1.1170 53.62
60 x 120 1.1170 55.85
60 x 144 1.1170 67.02
72 x 120 1.1170 69.12
72 x 240 1.1170 138.2
74 x 94.25 1.1170 55.80
94.25 x 104 1.1170 78.40
.090 x 36 x 96 1.2610 30.26
36 x 120 1.2610 38.88
36 x 144 1.2610 46.66
48 x 96 1.2610 40.35
48 x 120 1.2610 50.44
48 x 144 1.2610 60.53
60 x 120 1.2610 63.05
60 x 144 1.2610 75.66
72 x 120 1.2610 75.66
72 x 144 1.2610 90.79
72 x 240 1.2610 155.50
93.25 x 94.25 1.2610 79.10
93.25 x 145 1.2610 121.70
93.25 x 161 1.2610 135.10
93.25 x 171 1.2610 143.50
.100 x 48 x 96 1.3970 67.06
48 x 120 1.3970 55.88
48 x 144 1.3970 83.82
ALUMINUM SHEETNon-Heat Treatable
5052-H32AMS QQ A 250/8 ASTM B 209
Color: Purple
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
19
.125 x 36 x 96 1.7460 41.90
36 x 120 1.7460 52.38
36 x 144 1.7460 62.86
48 x 96 1.7460 55.87
48 x 120 1.7460 69.84
48 x 144 1.7460 83.81
51 x 128 1.7460 81.60
60 x 96 1.7460 72.00
60 x 120 1.7460 87.30
60 x 144 1.7460 104.76
72 x 96 1.7460 86.40
72 x 120 1.7460 108.00
72 x 144 1.7460 125.71
72 x 240 1.7460 216.00
92 x 94.25 1.7460 108.38
94.25 x 171 1.7460 201.45
.160 x 48 x 96 2.2310 71.39
48 x 120 2.2310 89.24
48 x 144 2.2310 107.08
72 x 120 2.2310 138.20
72 x 144 2.2310 160.63
.167 x 48 x 96 2.4050 76.65
48 x 110 2.4050 88.18
63.25 x 118.50 2.4050 125.20
74 x 90.40 2.4050 111.70
ALUMINUM SHEETNon-Heat Treatable
5052-H32AMS QQ A 250/8 ASTM B 209
Color: Purple
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
.190 x 36 x 96 2.654 63.69
36 x 120 2.654 82.10
36 x 144 2.654 98.50
48 x 96 2.654 84.93
48 x 120 2.654 106.16
48 x 144 2.654 127.39
55 x 96 2.654 100.30
55 x 144 2.654 146.20
60 x 120 2.654 132.70
60 x 144 2.654 159.24
72 x 96 2.654 131.30
72 x 120 2.654 159.24
72 x 144 2.654 191.10
72 x 240 2.654 328.30
.220 x 48 x 96 3.168 101.40
48 x 120 3.168 126.70
66.40 x 93.25 3.168 136.20
74 x 90.40 3.168 147.20
ALUMINUM SHEETNon-Heat Treatable
5052-H32AMS QQ A 250/8 ASTM B 209
Color: Purple
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
20
ALUMINUM SHEETNon-Heat Treatable
5052-H34AMS QQ A 250/8 ASTM B 209
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
.063 x 48 x 144 .907 43.46
.090 x 48 x 144 1.296 62.21
.125 x 48 x 144 1.800 86.40
21
.080 x 48 x 96 1.120 36.86
48 x 120 1.120 46.08
48 x 144 1.120 55.29
.090 x 48 x 96 1.296 41.47
48 x 120 1.296 51.84
48 x 144 1.296 62.21
.100 x 48 x 96 1.400 46.08
48 x 144 1.400 69.12
.125 x 36 x 96 1.800 43.20
36 x 120 1.800 54.00
48 x 96 1.800 57.60
48 x 120 1.800 72.00
48 x 144 1.800 86.40
60 x 120 1.800 90.00
60 x 144 1.800 108.00
.190 x 48 x 96 2.654 87.55
48 x 144 2.654 131.32
ALUMINUM SHEETNon-Heat Treatable
5052-H321
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
5052-H321 is an excellent product for bending.
22
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
ALUMINUM SHEETNon-Heat Treatable
5086-H116AMS QQ A 250/7 ASTM B 209
.063 x 48 x 96 .8710 29.03
48 x 144 .8710 41.81
.090 x 48 x 96 1.2480 41.47
48 x 144 1.2480 59.90
.125 x 48 x 96 1.7280 57.60
48 x 144 1.7280 82.90
72 x 120 1.7280 108.00
72 x 144 1.7280 129.60
72 x 240 2.6300 328.30
.190 x 48 x 96 2.6300 87.55
48 x 144 2.6300 126.20
72 X 120 2.6300 164.16
72 x 144 2.6300 197.00
72 x 240 2.6300 328.30
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
ALUMINUM SHEETNon-Heat Treatable
5083-H116AMS QQ A 250/6 ASTM B 209
.125 x 60 x 144 1.8000 108.0
.190 x 60 x 144 2.7360 164.2
23
ALUMINUM EXPANDED METAL
5005-H34Mill Finish — Non-Heat Treatable
EXPANDED ALUMINUM FLATTENED 5005-H34
1/2 .051 48 96 .260 .312 x 1.00
1/2 .081 48 96 .420 .312 x 1.00
3/4 .051 48 96 .160 .750 x 1.81
3/4 .081Light 48 96 .300 .687 x 1.75
3/4 .081Heavy 48 96 .390 .687 x 1.75
3/4 .125 48 96 .620 .625 x 1.75
1/2 .051 48 96 .270 .375 x .937
1/2 .081 48 96 .440 .375 x .937
3/4 .051 48 96 .170 .812 x 1.75
3/4 .081Heavy 48 96 .410 .750 x 1.68
3/4 .125 48 96 .650 .687 x 1.68
EXPANDED METALExpanded Metal may be used for many industrial purposes
such as open partitions, window guards, machine guards,
and other manufacturing and maintenance uses.
EXPANDED ALUMINUM STANDARD 5005-H34
Standard Flattened
Style Width in Length Est. lbs. Approx. size ofDesignation Inches in per opening in Inches
Inches sq. ft. SWO LWO
CLEAR ANODIZED ALUMINUM SHEET5005-H14PVC Protected
AMS QQ A 250/6 ASTM B 209
Est. lbs.THK Width Length per sq. ft.
.032 x 48 x 120 .447
.040 x 48 x 96 .559
48 x 120 .559
.050 x 48 x 96 .695
48 x 120 .695
.063 x 48 x 96 .880
48 x 120 .880
.080 x 48 x 120 1.129
.090 x 48 x 120 1.257
.125 x 48 x 120 1.765
.250 x 48.5 x 96.5 3.530 117.0
48.5 x 144.5 3.530 175.2
60 x 120 3.530 180.0
60 x 144 3.530 211.7
72.5 x 144.5 3.530 261.9
.375 x 48 x 96 5.300 172.8
48 x 144 5.300 259.2
.500 x 48 x 96 7.060 230.4
48 x 144 7.060 345.6
ALUMINUM PLATENon-Heat Treatable
1100-H14AMS QQ A 250/1 ASTM B 209
Color: White
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
.750 x 48 x 144 10.800 518.4
72.5 x 144.5 10.800 785.7
1 x 48 x 144 14.400 691.2
72.5 x 144.5 14.400 1048.0
1.50 x 60.5 x 144.5 21.600 1311.0
72.5 x 144.5 21.600 1571.0
2 x 72.5 x 144.5 28.800 2095.0
ALUMINUM PLATENon-Heat Treatable
1100-H112AMS QQ A 250/1 ASTM B 209
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
24
25
ALUMINUM PLATENon-Heat Treatable
3003-H14AMS QQ A 250/1 ASTM B 209
Color: Green
.250 x 48 x 96 3.560 114.1
48 x 120 3.560 144.0
48 x 144 3.560 171.1
72 x 120 3.560 216.0
72 x 144 3.560 259.2
.375 x 48 x 96 5.350 172.8
48 x 144 5.350 259.2
48 x 146.5 5.350 263.7
.500 x 48 x 96 7.200 230.4
48 x 144 7.200 345.6
72 x 120.5 7.200 433.8
72 x 144 7.200 518.4
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
.250 x 48 x 96 3.600 115.2
ALUMINUM PLATENon-Heat Treatable
5052-0AMS QQ A 250/8 ASTM B 209
ALUMINUM PLATENon-Heat Treatable
5052-H32AMS QQ A 250/8 ASTM B 209
Color: Purple
.250 x 48 x 96 3.490 111.7
48 X 120 3.490 139.7
48 x 144 3.490 167.6
60 x 96 3.490 144.0
60 x 120 3.490 174.5
60 x 144 3.490 209.5
72 X 120 3.490 209.4
72 x 144 3.490 251.4
72 x 240 3.490 432.0
.375 x 48 x 96 5.240 172.8
48 x 120 5.240 216.0
48 x 144 5.240 251.4
60 x 120 5.240 262.0
60 x 144 5.240 314.3
72.5 x 144.5 5.240 392.9
.500 x 48 x 144 6.980 335.2
48 x 96 6.980 230.4
48 x 120 6.980 288.0
60 x 120 6.980 360.0
60 x 144 6.980 419.0
72 x 120 6.980 432.0
72 x 144 6.980 518.4
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
26
27
ALUMINUM PLATENon-Heat Treatable
5083-H112AMS QQ A 250/6 ASTM B 209
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
1.25 x 60.50 x 144.50 18.00 1093
1.50 x 53 x 146 21.60 1161
60.50 x 144.50 21.60 1311
2.00 x 60.50 x 144.50 28.80 1748
2.50 x 60.50 x 144.50 36.00 2186
3.00 x 48.75 x 144.75 43.20 2117
3.15 x 46.50 x 146.25 45.36 2142
3.50 x 60 x 141 50.40 2961
4.50 x 48.50 x 144.50 64.80 3154
60.50 x 144.50 64.80 3934
4.73 x 61 x 152 68.11 4386
5.00 x 63 x 141 72.00 4441
5.71 x 48.50 x 149.50 82.22 4140
6.70 x 47.40 x 105 96.48 3342
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
.750 x 48 x 144 10.80 518.4
1.00 x 48 x 96 14.40 460.8
48 x 144 14.40 691.2
72.50 x 144.50 14.40 1047
1.50 x 60.50 x 144.50 21.60 1311
2 x 72.50 x 144.50 28.80 2095
ALUMINUM PLATENon-Heat Treatable
5052-H112AMS QQ A 250/8 ASTM B 209
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
.250 x 48 x 144 3.60 172.8
ALUMINUM PLATENon-Heat Treatable
5052-H34AMS QQ A 250/8 ASTM B 209
28
ALUMINUM PLATENon-Heat Treatable
5083-H116AMS QQ A 250/6 ASTM B 209
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
.250 x 60 x 144 3.60 216
.375 x 60 x 144 5.40 324
.500 x 60 x 144 7.20 432
.750 x 60.5 x 144.5 10.80 657
1.00 x 48 x 144 14.40 697
60.5 x 144.5 14.40 874
1.25 x 60.5 x 144.5 18.00 1080
ALUMINUM PLATENon-Heat Treatable
5086-H112AMS QQ A 250/7 ASTM B 209
1.50 x 72 x 144 21.60 1555
72.5 x 144.5 21.60 1571
2.00 x 72 x 144 28.80 2074
72.5 x 144.5 28.80 2095
2.50 x 60.5 x 144.5 36.00 2186
3.00 x 60.5 x 144.5 43.20 2623
3.50 x 60 x 141 50.40 2961
72 x 149 50.40 3755
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
.250 x 48 x 96 3.46 111
48 x 144 3.46 166
60 x 120 3.46 180
60 x 144 3.46 216
72 x 144 3.46 259
72 x 240 3.46 415
.3125 x 72 x 144 4.31 324
72 x 240 4.31 533
.375 x 48 x 96 5.18 173
48 x 120 5.18 216
60 x 120 5.18 270
60 x 144 5.18 324
72 x 144 5.18 373
72 x 240 5.18 648
.500 x 48 x 96 6.91 230
48 x 120 6.91 288
60 x 120 6.91 360
60 x 144 6.91 432
72 x 120 6.91 432
72 x 144 6.91 518
72 x 240 6.91 864
88 x 181 6.91 796
.750 x 48 x 96 10.36 346
48 x 120 10.36 432
60 x 120 10.36 540
60 x 144 10.36 648
72 x 144 10.36 746
72 x 240 10.36 1269
1.00 x 48 x 96 13.82 461
48 x 120 13.82 576
60 x 120 13.82 720
60 x 144 13.82 864
72 x 144 13.82 1037
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
ALUMINUM PLATENon-Heat Treatable
5086-H116AMS QQ A 250/7 ASTM B 209
29
.045 x 44 x 99 0.65 19.6
50 x 99 0.65 22.3
.063 x 48 x 96 0.84 31.0
48 x 120 0.84 36.3
50 x 99 0.84 31.2
60 x 99 0.84 37.4
.080 x 48 x 144 1.15 55.3
.100 x 48 x 96 1.57 46.1
48 x 144 1.57 69.1
48 x 192 1.57 92.2
60 x 96 1.57 57.6
60 x 144 1.57 86.4
60 x 192 1.57 125.6
.125 x 48 x 96 1.92 57.6
48 x 120 1.92 76.8
48 x 144 1.92 92.2
48 x 192 1.92 115.2
60 x 96 1.92 72.0
60 x 120 1.92 96.0
60 x 144 1.92 108.0
60 x 192 1.92 144.0
.190 x 48 x 96 2.82 90.2
48 x 120 2.82 112.8
48 x 144 2.82 135.4
48 x 192 2.82 173.2
60 x 96 2.82 109.4
60 x 120 2.82 136.8
60 x 144 2.82 164.2
60 x 192 2.82 225.6
.250 x 48 x 96 3.60 115.2
48 x 120 3.60 144.0
48 x 144 3.60 172.8
48 x 192 3.60 230.4
60 x 96 3.60 144.0
60 x 120 3.60 180.0
60 x 144 3.60 216.0
60 x 192 3.60 288.0
ALUMINUM TREAD PLATEBright Finish
3003-H22/24Raised Diamond Pattern One Side
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
See page 68 for 6061-T6 Mill Finish.
30
.063 x 48 x 96 .907 29.0
48 x 120 .907 36.3
.100 x 48 x 96 1.440 50.2
48 x 192 1.440 92.2
.125 x 48 x 96 1.800 61.4
48 x 144 1.800 86.4
48 x 192 1.800 115.2
60 x 120 1.800 90.0
60 x 192 1.800 144.0
.1875 x 48 x 96 2.700 86.4
60 x 120 2.700 135.0
60 x 192 2.700 216.0
.250 x 48 x 96 3.600 115.2
60 x 120 3.600 180.0
60 x 192 3.600 288.0
ALUMINUM TREAD PLATEBright Finish
3003-H22/24Rope Design
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
31
See page 68 for 6061-T6 Mill Finish.
Aluminum Tread Plate - in either a diamond orrope pattern is often utilized as a traction surfaceon truck running boards & utility boxes.
32
.032 x 8.500 .1780
12.500 .3850
.040 x 6.000 .1109
7.000 .1509
8.500 .2225
9.000 .2495
10.000 .3080
10.500 .3396
11.000 .3727
11.500 .4073
12.000 .4435
12.250 .4622
13.000 .5205
13.500 .5613
14.000 .6037
15.000 .6940
16.250 .8133
16.500 .8385
20.500 1.2944
22.000 1.4907
.045 x 25.000 2.1656
.050 x 8.500 .2782
9.000 .3119
10.000 .3850
10.500 .4245
11.000 .4659
11.500 .5092
12.000 .5552
12.500 .6016
13.000 .6507
13.500 .7017
14.000 .7546
17.000 1.1127
25.500 2.5035
ALUMINUM CIRCLES
1100-0AMS QQA 250/1 ASTM B 209
Thk Diameter Weight Inches Size per piece
3003-0, 3003-H14, 5052-0 and 6061-0 Circles available upon request.
33
.063 x 8.000 .3105
8.500 .3505
10.000 .4851
12.000 .6985
12.500 .7580
16.000 1.2419
22.000 2.3479
22.500 2.4558
23.000 2.5662
24.000 2.7942
25.000 3.0319
26.000 3.2793
27.000 3.5364
31.000 4.6618
33.000 5.2827
34.000 5.6078
39.500 7.5688
40.500 7.9569
43.000 8.9695
47.500 10.9451
50.500 12.3713
.080 x 29.000 5.1881
32.000 6.3078
34.000 7.1313
36.000 7.9834
38.000 8.8950
40.000 9.8704
41.250 10.4816
43.000 11.3898
46.000 13.0347
49.000 14.7902
54.000 17.9626
58.000 20.7222
.090 x 26.000 4.6870
41.500 11.9352
.100 x 4.250 .1391
5.750 .2546
Thk Diameter Weight Inches Size per piece
ALUMINUM CIRCLES1100-0
AMS QQA 250/1 ASTM B 209
3003-0, 3003-H14, 5052-0 and 6061-0 Circles available upon request.
34
.040 x 10.000 .3080
11.000 .3727
11.500 .4073
12.000 .4435
12.500 .4813
13.500 .5613
15.000 .6930
19.000 1.1118
.050 x 8.500 .2782
9.000 .3119
10.000 .3850
11.500 .5092
12.000 .5544
12.500 .6016
14.500 .8095
15.000 .8663
19.500 1.4640
.063 x 10.000 .4851
10.500 .5348
12.000 .6985
12.500 .7580
13.000 .8198
14.000 .9508
.080 x 15.875 1.5524
18.688 2.1513
.100 x 20.250 3.1575
24.813 4.7408
.125 x 30.625 9.0272
ALUMINUM CIRCLES
3002-0Thk Diameter Weight
Inches Size per piece
3003-0, 3003-H14, 5052-0 and 6061-0 Circles available upon request.
35
ALLOY 2024 Known widely as an “aircraft” alloy, thisgrade can offer strength similar to or exceeding those of mildsteel in the heat treated condition. This alloy does not havegood corrosion resistance.
CORROSION RESISTANCE in the heat-treated condition isonly fair. With sheet products, corrosion resistance isenhanced greatly by cladding with a high purity alloy.
FINISHING can be carried out by any of the processes appli-cable to aluminum alloys; however, the anodizing of thismaterial will not provide a color match nearly as consistentas other alloys. A pleasing finish may be applied to 2024 bythe use of a clear conversion coating, over either mill finishor polished surface.
WELDING by resistance method is feasible. Fusion weldingthough not normally recommended can be done with properprocedures and equipment. When welded, 2024 is hot short(brittle); consequently, fixtures or joints should be designed tominimize strain of the weld zone during the cooling period.Brazing and soldering are not recommended.
MACHINING is relatively good in either T4 and T351 tem-pers. The major machining problem is the production of along stringy chip; hence, drills and taps should have highlypolished flutes to assist chip flow.
WORKABILITY of 2024 in the annealed condition is good.Also immediately following solution heat treating the alloy isreadily formed; however, after four hours of natural agingthere is difficulty experienced with any but the simplest forming.
ANNEALING (anneal cycle, 0 temper): To remove theeffects of cold work, use a metal temperature of 650 F.Time at temperature is unimportant.
SOLUTION HEAT TREATMENT (T4 temper): For solutionheat treatment a metal temperature of 920 F should beused. The time of heating to temperature varies with theproduct, the type of furnace and the size of load.
TYPICAL END USES: Aircraft skins, cowls and structurals,aircraft structural application, side panels, molds for plasticsindustry.
The heat treatable alloys attain maximum strength throughcontrolled heat treatment either before or after forming operations. They are the highest strength alloys and arehard, with good appearance, and generally good resistanceto corrosion and abrasion. They are particularly suited forstructural applications and other uses requiring both formability and strength.
ALUMINUM SHEET & PLATE GUIDE to
HEAT TREATABLE ALLOYS
36
ALLOY 6061 One of the most versatile of all heat treat-
able alloys. This alloy possesses good formability and
corrosion resistance with medium strength characteristics.
COMMERCIAL PLATE 1/4 to 24” in thickness manufactured
to be applicable to Aluminum Association Standards.
TOOLING PLATE Guaranteed to be better than Aluminum
Association Standards before and after cutting. Produced to
one - half (1/2) Association tolerances all on the “plus side”
and receives a brush finish to reduce stains from heat treat-
ing and from internal process travel marks.
COSMETIC TOOLING PLATE The industries most consis-
tent premiere tooling plate. This product is vinyl protected on
both sides to preserve the top and bottom surfaces as they
are shipped from the mill.
CORROSION RESISTANCE is good, in fact, this alloy resists
atmospheric and chemical corrosion better than any other
commercially produced heat treatable sheet or plate product.
FINISHING may be done by any of the standard finishing
practices normally applied to aluminum. The material takes
an excellent anodic finish provided care has been exercised
in the removal of the heat treat stains. Paint finishes are also
used.
WELDING is readily accomplished by any of the processes
normally used to weld aluminum alloys. Welding does not
lower the corrosion resistance of the alloy but there is some
loss of mechanical properties in the weld area and heat
affected zone.
MACHINING of this alloy produces good results; the rating is
excellent compared to other aluminum sheet and plate alloys.
Machining of 6061, like machining of most other aluminum
alloys, requires the use of tools which are sharp and well
polished and which are run at high speeds with copious
amounts of lubricant cascading over the tools and work sur-
face.
ALUMINUM SHEET & PLATE GUIDE to
HEAT TREATABLE ALLOYS
37
ALLOY 6061 cont’d
WORKABILITY in the "0" condition is quite similar to 5005
and 5050 in the same condition but in the heat treated (T4)
state and in the heat treated and aged condition (T6) the
workability is much like that of 5052 in the H34 and H38 con-
dition. Considerable forming and bending may be done in the
T6 condition. However, it is generally recommended that all
drawing be attempted in the T4 or 0 conditions. Parts which
can be successfully formed or drawn in the T4 temper may
then be artificially aged to raise their properties to the full T6
strength level.
ANNEALING (anneal cycle, 0 temper): To remove the
effects of cold work, use a metal temperature of 650 F. To
remove the effects of heat treatment, use a metal tempera-
ture of 775 F. The time in the furnace after the entire load
has been brought up to annealing temperature should be 2-3
hours. When annealing to remove the effects of heat treat-
ment a cooling rate of 50 F per hour down to 500 F should
be used. The subsequent cooling rate need not be controlled.
SOLUTION HEAT TREATMENT (T4 Temper) Consult
Military Specifications MIL H 6088 for suitable time and
temperature.
TYPICAL END USES: Most versatile alloy. Used for a wide
range of mechanical and corrosion resistant properties.
ALUMINUM SHEET & PLATE GUIDE to
HEAT TREATABLE ALLOYS
38
ALLOY 7050 Alloy is the principal choice for many
aerospace applications that require the best combination of
strength, fracture toughness and resistance to stress corro-
sion cracking (scc).
CORROSION RESISTANCE Maintains equal exfoliation
and stress corrosion resistance at high strength levels
when compared to 7075.
T6 condition provides the highest strength with excellent
resistance to exfoliation corrosion.
T4 condition is used in more demanding applications of
stress corrosion cracking (scc).
FINISHING is similar for anodizing conversion coating,
painting and general cleaning that apply to alloy 7075.
THERMAL TREATMENTS for heat treating and aging are
defined in MIL H 6088.
STRENGTH properties are retained in thicker plate
sections, while also maintaining good fracture toughness
levels and resistance to stress corrosion cracking (scc).
T7651 has the highest strength levels. Exfoliation corro-
sion resistance is good, with average resistance to stress
corrosion cracking (scc).
T7451 has slightly lower strength levels than the T7651
condition. Exfoliation resistance is excellent and resistance
to stress corrosion resistance (scc) is improved.
TYPICAL END USES: include aircraft bulkheads, fuselage,
and frame assemblies.
ALUMINUM SHEET & PLATE GUIDE to
HEAT TREATABLE ALLOYS
39
ALLOY 7075 is among the highest strength alloys
available, used extensively in highly stressed parts and air
frame structures with fair corrosion resistant properties.
CORROSION RESISTANCE in the heat treated and aged
condition is fair. Sheet products are usually clad to
reduce the affects of intergranular corrosion. Temper T73
is used for resistance to stress corrosion phenomenon.
FINISHING: Anodic coatings are applied for corrosion
protection only.
WELDABILITY by the fusion method gives inferior results
and is not recommended. Resistance, spot, and seam
welding may be readily accomplished with clad material in
the T6 condition. Resistance welding of the bare material is
not recommended due to the severe loss in corrosion
resistance which occurs as a result of such welding
attempts. Brazing and soldering are not recommended.
MACHINING requires high surface speed of the cutter to
accomplish good results. Cutter speeds are in the range
of 700 to 3000 feet per minute.
STRENGTH 7075 is one of the highest strength aluminum
alloys commercially available. It exhibits a high degree of
notch sensitivity and care must be taken not to create
stress risers such as nicks and deep scratches during the
working of sheet or plate into its final form.
WORKABILITY is extremely low in the T6 temper. It is
best formed immediately after quenching. In the 0
condition, 7075 can be successfully formed on all types of
equipment but because of its higher yield strength, a
greater allowance will have to be made for spring-back
than for most other aluminum alloys.
ALUMINUM SHEET & PLATE GUIDE to
HEAT TREATABLE ALLOYS
40
ALLOY 7075 cont’d
ANNEALING (anneal cycle, 0 temper): To remove the
effect of cold work and/or heat treatment, use a metal tem-
perature of 775 F. The time in the furnace after the entire
load has been brought up to annealing temperature should
be 2-3 hours. A cooling rate of 100 F per hour down to
450 F should be used.
SOLUTION HEAT TREATMENT For solution heat treat-
ment a metal temperature of 870 F should be used. For
soak times (time at temperature) see Military Specification
MIL H 6088.
TYPICAL END USES: Aircraft applications, plastic molds
or when higher mechanical properties are required.
Ideal for highly stressed parts.
ALUMINUM SHEET & PLATE GUIDE to
HEAT TREATABLE ALLOYS
41
ALUMINUM SHEET & PLATE GUIDE to
CAST TOOLING PLATE
MIC-6 cast aluminum plate holds close tolerances in all
dimensions and is thermally stabilized. MIC-6 is excellent
for design components requiring metal removal without dis-
tortion. This molten metal is continuously fed, eliminating
defects.
FINISHING Can be anodized, hard coat anodized and
painted.
WELDABILITY Suitable for welding.
MACHINING Surface finish of RMS 20 ; thickness toler-
ances of plus/minus .005.
TYPICAL END USES: Aircraft tooling, automotive tooling,
CNS routing tables, chip printers, circuit printers,
dielectrics, electronics, food machinery, foundry patterns,
heating and cooling patterns, index tables, medical instru-
mentation, packing machinery and molds, pharmaceutical
machinery, printing machinery, robotics, vacuum chucks.
K100-S provides consistent hardness throughout the
entire thickness range with vacuum and pressure integrity.
Improved mechanical properties and excellent corrosion
resistance. K100-S has consistent mechanical properties
throughout its thickness. This plate has excellent anodizing
capabilities including hard-coat anodizing.
CORROSION RESISTANCE is superior. (Passes ASTM B
117 corrosion test)
FINISHING Can be anodized, hard coat anodized, painted
on both sides (including finishes requiring heat curing
processes) and nickel plated.
WELDABILITY Fully weldable.
MACHINING Surface finish of RMS 18-19 ; thickness tol-
erances of plus/minus .005.
TYPICAL END USES: Molds for shoes, skis and many
other products.
42
M-1 was developed especially for the Molding Industry.
It is used for mold applications where 1 to 12 cavities are
required. This cost-effective aluminum plate lowers pro-
duction costs by eliminating the need for reworking material
as in tool steel or wrought aluminum alloys. M-1 maintains
dimensional stability. This superior mold plate provides
better machinability with a plate center that never gets
gummy - regardless of thickness.
FINISHING Capable of finishes from etched to highly pol-
ished. Can be hard coat anodized, and nickel plated.
WELDABILITY Fully weldable.
TOLERANCES Thickness produced to +.125, width and
length produced to +1/4.
TYPICAL END USES: Molds used to manufacture shoes,
skis, automobile parts and many other consumer products.
ALUMINUM SHEET & PLATE GUIDE to
ALUMINUM MOLD PLATE
Aluminum Mold Plate is used to manufacture manyconsumer products.
43
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
.016 x 48 x 144 .229 11.05
.032 x 48 x 144 .461 22.13
.040 x 48 x 144 .576 27.65
.050 x 48 x 144 .720 34.56
.063 x 48 x 144 .907 43.54
.080 x 48 x 144 1.150 55.20
.090 x 48 x 144 1.300 62.40
.100 x 48 x 144 1.440 69.12
.125 x 48 x 144 1.800 86.40
ALUMINUM SHEETHeat Treatable
2024-0 BareAMS QQ A 250/4 AMS 4035 ASTM B 209
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
.020 x 48 x 144 .288 13.82
.025 x 48 x 144 .360 17.28
.032 x 48 x 144 .481 22.13
.040 x 48 x 144 .576 27.65
.050 x 48 x 144 .720 34.56
.063 x 48 x 144 .907 43.54
.071 x 48 x 144 1.020 48.96
.080 x 48 x 144 1.150 55.20
.090 x 48 x 144 1.300 62.40
.100 x 48 x 144 1.440 69.12
.125 x 48 x 144 1.800 86.40
.160 x 48 x 144 2.304 110.59
ALUMINUM SHEETHeat Treatable
2024-0 AlcladAMS QQ A 250/5 AMS 4040 ASTM B 209
Vinyl Masking on one or both surfaces available upon request.
44
ALUMINUM SHEETHeat Treatable
2024-T3 BareAMS QQ A 250/4 AMS 4037 ASTM B 209
Color: Red
.011 x 48 x 144 .158 7.60
.016 x 48 x 144 .230 11.04
.020 x 48 x 144 .288 13.82
.025 x 48 x 144 .360 17.28
.032 x 48 x 144 .461 22.13
.040 x 48 x 144 .576 18.43
.050 x 48 x 144 .720 34.56
.063 x 48 x 144 .907 43.54
.071 x 48 x 144 1.020 48.96
.080 x 48 x 144 1.150 55.20
.090 x 48 x 144 1.300 62.40
.100 x 48 x 144 1.440 69.12
.125 x 48 x 144 1.800 86.40
.160 x 48 x 144 2.300 110.40
.190 x 48 x 144 2.740 131.52
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
45
Est. lbs. Est. lbs.THK Width Length per sq. ft per sheet
ALUMINUM SHEETHeat Treatable
2024-T3 AlcladAMS QQ A 250/5 AMS 4041 ASTM B 209
.012 x 48 x 144 .173 8.29
.016 x 48 x 144 .230 11.40
.020 x 48 x 144 .288 13.82
.025 x 48 x 144 .360 17.28
.032 x 48 x 144 .461 22.13
.040 x 48 x 144 .576 27.65
.050 x 48 x 144 .720 34.56
.056 x 36 x 176 .800 35.48
.063 x 48 x 144 .907 43.54
.071 x 48 x 144 1.020 48.96
.080 x 48 x 144 1.150 55.20
.090 x 48 x 144 1.300 62.40
.100 x 48 x 144 1.440 69.12
.125 x 48 x 144 1.800 86.40
.160 x 48 x 144 2.300 110.40
.190 x 48 x 144 2.740 131.52
ALUMINUM SHEETHeat Treatable
2024-T81AMS QQ A 250/4 ASTM B 209
.040 x 48 x 144 .600 27.64
.080 x 48 x 144 1.150 55.29
.090 x 48 x 144 1.300 62.20
ALUMINUM SHEETHeat Treatable
2024-T81 AcladAMS QQ A 250/5 ASTM B 209
.071 x 48 x 144 1.023 49.07
Est. lbs. Est. lbs.THK Width Length per sq. ft per sheet
Est. lbs. Est. lbs.THK Width Length per sq. ft per sheet
46
.020 x 48 x 144 .288 13.82
.025 x 48 x 144 .353 16.94
.032 x 48 x 144 .452 21.70
.040 x 48 x 144 .564 27.07
.050 x 48 x 144 .706 33.89
.050 x 53.50 x 146 .706 39.06
.063 x 48 x 144 .889 42.67
.071 x 48 x 144 1.000 48.00
.080 x 48 x 144 1.127 54.10
.090 x 48 x 144 1.270 60.96
.100 x 48 x 144 1.411 67.73
.125 x 48 x 144 1.764 84.67
.190 x 48 x 144 2.685 128.88
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
ALUMINUM SHEETHeat Treatable
6061-0AMS QQ A 250/11 AMS 4025 ASTM B 209
Color: Silver
47
.016 x 48 x 144 .226 10.85
.020 x 48 x 144 .282 13.54
.025 x 48 x 144 .353 16.94
.032 x 48 x 144 .452 21.70
.040 x 48 x 144 .564 27.07
.050 x 48 x 144 .706 33.89
.063 x 48 x 144 .889 42.67
.071 x 48 x 144 1.023 49.08
.080 x 48 x 144 1.127 54.10
.090 x 48 x 144 1.270 60.96
.100 x 48 x 96 1.411 46.08
48 x 144 1.411 67.73
.125 x 48 x 144 1.764 84.67
.160 x 48 x 144 2.254 108.19
.190 x 48 x 96 2.685 87.55
48 x 144 2.685 128.88
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
ALUMINUM SHEETHeat Treatable
6061-T4AMS QQ A 250/11 AMS 4026 ASTM B 209
Color: Brown
Mechanical shearing foraccuracy and efficiency.
48
.016 x 48 x 144 .233 11.18
.020 x 48 x 144 .282 13.54
.025 x 48 x 144 .353 16.94
.032 x 48 x 96 .452 14.75
48 x 144 .452 21.70
60 x 120 .452 23.04
60 x 144 .452 27.65
.040 x 48 x 96 .564 18.43
48 x 120 .564 23.04
48 x 144 .564 27.65
60 x 120 .564 28.80
60 x 144 .564 34.56
.050 x 48 x 96 .706 23.05
48 x 120 .706 28.80
48 x 144 .706 34.56
60 x 120 .706 36.00
60 x 144 .706 43.20
.063 x 36 x 96 .889 21.77
48 x 72 .889 21.77
48 x 96 .889 28.45
48 x 120 .889 35.56
48 x 144 .889 42.67
50 x 144 .889 44.45
60 x 120 .889 45.36
60 x 144 .889 53.34
72 x 96 .889 43.55
72 x 120 .889 54.43
72 x 144 .889 65.32
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
ALUMINUM SHEETHeat Treatable
6061-T6AMS QQ A 250/11 AMS 4027 ASTM B 209
Color: Blue
49
.071 x 48 x 144 1.000 48.00
.080 x 48 x 72 1.127 27.65
48 x 96 1.127 36.86
48 x 120 1.127 46.08
48 x 144 1.127 55.30
60 x 120 1.127 57.60
60 x 144 1.127 69.12
.090 x 36 x 96 1.270 31.10
48 x 72 1.270 31.10
48 x 96 1.270 41.47
48 x 120 1.270 51.84
48 x 144 1.270 62.21
60 x 120 1.270 64.80
60 x 144 1.270 77.76
72 x 96 1.270 62.21
72 x 144 1.270 93.31
72 x 156 1.270 101.1
72 x 240 1.270 155.5
.100 x 48 x 72 1.411 34.56
48 x 96 1.411 46.08
48 x 144 1.411 67.73
60 x 120 1.411 72.00
60 x 144 1.411 84.66
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
ALUMINUM SHEETHeat Treatable
6061-T6AMS QQ A 250/11 AMS 4027 ASTM B 209
Color: Blue
50
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
.125 x 36 x 96 1.764 42.34
36 x 120 1.764 54.00
36 x 144 1.764 64.80
48 x 72 1.764 43.20
48 x 96 1.764 56.45
48 x 120 1.764 70.56
48 x 144 1.764 84.67
60 x 120 1.764 90.00
60 x 144 1.764 105.84
72 x 96 1.764 86.40
72 x 120 1.764 108.00
72 x 144 1.764 129.60
72 x 156 1.764 140.40
72 x 240 1.764 216.00
.160 x 48 x 96 2.254 73.73
48 x 120 2.254 92.16
48 x 144 2.254 110.60
60 x 144 2.254 138.20
.190 x 36 x 96 2.685 64.44
36 x 144 2.685 98.50
48 x 96 2.685 85.92
48 x 120 2.685 107.40
48 x 144 2.685 128.88
60 x 120 2.685 136.86
60 x 144 2.685 161.10
72 x 96 2.685 131.30
72 x 120 2.685 164.20
72 x 144 2.685 197.00
72 x 156 2.685 213.40
72 x 240 2.685 328.30
ALUMINUM SHEETHeat Treatable
6061-T6AMS QQ A 250/11 AMS 4027 ASTM B 209
Color: Blue
51
ALUMINUM SHEETHeat Treatable
7075-0 BareAMS QQ A 250/12 AMS 4044 ASTM B 209
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
.032 x 48 x 144 .466 22.37
.040 x 48 x 144 .582 27.94
.050 x 48 x 144 .727 34.91
.063 x 48 x 144 .916 43.98
.071 x 48 x 144 1.030 49.44
.080 x 48 x 144 1.162 55.78
.090 x 48 x 144 1.296 62.21
.100 x 48 x 144 1.440 69.12
.125 x 48 x 144 1.818 87.26
.190 x 48 x 144 2.736 131.32
.020 x 48 x 144 .288 13.82
.025 x 48 x 144 .364 17.47
.032 x 48 x 144 .466 22.37
.040 x 48 x 144 .582 27.94
.050 x 48 x 144 .727 34.89
.063 x 48 x 144 .916 43.98
.071 x 48 x 144 1.030 49.44
.080 x 48 x 144 1.162 55.78
.090 x 48 x 144 1.313 63.02
.100 x 48 x 144 1.440 69.12
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
ALUMINUM SHEETHeat Treatable
7075-0 AlcladAMS QQ A 250/13 AMS 4048 ASTM B 209
Vinyl protection available on one or both sides.
52
ALUMINUM SHEETHeat Treatable
7075-T6 BareAMS QQ A 250/12 AMS 4045 ASTM B 209
Color: Black
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
.016 x 48 x 144 .230 11.05
.020 x 48 x 144 .291 13.97
.025 x 48 x 144 .364 17.47
.032 x 48 x 144 .466 22.37
.040 x 48 x 144 .582 27.94
.050 x 48 x 144 .727 34.89
.063 x 48 x 144 .916 43.97
60 x 144 .916 54.43
.071 x 48 x 144 1.030 49.44
.080 x 48 x 144 1.162 55.78
55 x 96 1.162 42.61
.090 x 48 x 144 1.313 63.02
.100 x 48 x 144 1.454 69.79
.125 x 48 x 144 1.818 87.26
.160 x 48 x 144 2.323 111.50
.190 x 48 x 144 2.767 132.82
53
.016 x 48 x 144 .253 12.14
.020 x 48 x 144 .291 13.97
60 x 60 .291 7.2
60 x 180 .291 21.60
.025 x 48 x 144 .364 17.47
.032 x 48 x 144 .466 22.37
.040 x 48 x 144 .582 27.94
.050 x 48 x 144 .727 34.89
.063 x 48 x 144 .916 43.97
.071 x 48 x 144 1.030 49.44
60 x 144 1.030 61.34
.080 x 48 x 144 1.162 55.78
.090 x 48 x 144 1.313 63.02
.100 x 48 x 144 1.454 69.79
.125 x 48 x 144 1.818 87.26
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
ALUMINUM SHEETHeat Treatable
7075-T6 AlcladAMS QQ A 250/13 AMS 4049 ASTM B 209
Color: Black
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
ALUMINUM SHEETHeat Treatable
7475-T761 AlcladAMS 4100
.125 x 48 x 144 1.800 86.40
54
.250 x 48.50 x 144.50 3.60 175.2
54.25 x 200.25 3.60 271.5
60.50 x 144.50 3.60 218.6
.3125 x 48.50 x 144.50 4.51 219.5
60.50 x 144.50 4.51 273.2
.375 x 48.50 x 144.50 5.40 262.8
58 x 147 5.40 319.7
.500 x 48.50 x 144.50 7.20 350.4
60.50 x 144.50 7.20 437.1
.625 x 48.50 x 144.50 9.00 438.0
60.50 x 144.50 9.00 546.4
.750 x 48.50 x 144.50 10.80 525.5
65.00 x 144.50 10.80 704.4
.875 42.75 x 150 12.60 561.0
48.50 x 144.50 12.60 525.6
60.50 x 144.50 12.60 764.9
1.00 x 48.50 x 144.50 14.40 701.0
60.50 x 144.50 14.40 874.2
64 x 149 14.40 953.6
1.25 x 48.50 x 144.50 18.00 876.0
60.50 x 144.50 18.00 1111.0
1.50 x 48.50 x 144.50 21.60 1051.0
60.50 x 144.50 21.60 1311.0
64 x 145.50 21.60 1396.8
1.75 x 48.50 x 144.50 25.20 1226.0
60.50 x 144.50 25.20 1530.0
2.00 x 48 x 119 28.80 1142.0
48.50 x 144.50 28.80 1401.0
59 x 142 28.80 1676.0
60.50 x 144.50 28.80 1748.0
64.75 x 154.50 28.80 2001.0
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
ALUMINUM PLATEHeat Treatable
2024-T351AMS QQ A 250/4 AMS 4037 ASTM B 209
Color: Red
55
2.25 x 48.5 x 144.5 32.70 1591
60.5 x 144.5 32.70 1967
2.50 x 48.5 x 144.5 36.00 1752
60.5 x 144.5 36.00 2186
61 x 146 36.00 2227
72.5 x 155.5 36.00 2818
3.00 x 48.5 x 144.5 43.20 2102
49.0 x 147 43.20 2161
60.5 x 144.5 43.20 2623
3.50 x 48.5 x 144.5 50.40 2452
60.5 x 144.5 50.40 3060
4.00 x 48.5 x 144.5 57.60 2803
51 x 123 57.60 2509
60.5 x 144.5 57.60 3497
4.50 x 48.5 x 144.5 64.80 3153
60.5 x 144.5 64.80 3934
5.00 x 49 x 152 72.00 3724
60.5 X 144.5 72.00 4371
6.00 x 48.5 x 144.5 86.40 4204
60.5 x 144.5 86.40 5245
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
ALUMINUM PLATEHeat Treatable
2024-T351AMS QQ A 250/4 AMS 4037 ASTM B 209
Color: Red
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
ALUMINUM PLATEHeat Treatable
2024-T851AMS QQ A 250/4
3.25 x 58 x 176 46.80 3318
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
ALUMINUM PLATEHeat Treatable
2014-T651AMS 4029 BSS 7055 MIL STD 2154
1.125 x 48.7 x 144.7 16.50 793
56
.250 x 36.5 x 96.5 3.53 86.3
36.5 x 145 3.53 132.3
48.5 x 96.5 3.53 114.7
48.5 x 144.5 3.53 171.7
50.5 x 145 3.53 183.1
52.5 x 145 3.53 190.3
55.5 x 145 3.53 201.2
60.5 x 96.5 3.53 145.9
60.5 x 144.5 3.53 214.1
72.5 x 144.5 3.53 256.5
84.5 x 145 3.53 306.3
84.5 x 156 3.53 284.0
* 96.5 x 145 3.53 349.8
* 96.5 x 240 3.53 567.7
.3125 x 48.5 x 96.5 4.42 146.3
48.5 x 144.5 4.42 215.1
57.5 x 145 4.42 260.5
60.5 x 144.5 4.42 268.3
72.5 x 144.5 4.42 327.4
ALUMINUM TOOLING PLATEHeat Treatable
6061-T651AMS QQ A 250/11 AMS 4027 ASTM B 209
Color: Blue
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
* Tooling Plate tolerances do not apply to these widths.
57
.375 x 36.5 x 96.5 5.29 129.4
36.5 x 145 5.29 198.4
48.5 x 96.5 5.29 171.9
48.5 x 144.5 5.29 257.5
49.5 x 145 5.29 269.2
50.5 x 145 5.29 274.7
52.5 x 145 5.29 285.4
55.5 x 145 5.29 301.8
60.5 x 144.5 5.29 321.2
72.5 x 144.5 5.29 384.8
84.5 x 145 5.29 459.4
.4375 x 48.5 x 96.5 6.29 204.6
48.5 x 144.5 6.29 306.1
60.5 x 144.5 6.29 382.4
.500 x 36.5 x 96.5 7.06 172.9
36.5 x 145 7.06 264.6
48.5 x 96.5 7.06 229.5
48.5 x 144.5 7.06 343.4
50.5 x 145 7.06 366.1
52.5 x 145 7.06 380.7
55.5 x 145 7.06 402.4
60.5 x 144.5 7.06 428.3
72.5 x 144.5 7.06 524.0
84.5 x 145 7.06 612.6
* 96.5 x 145 7.06 699.7
* 96.5 x 156 7.06 738.1
* 96.5 x 240 7.06 1135.5
ALUMINUM TOOLING PLATEHeat Treatable
6061-T651AMS QQ A 250/11 AMS 4027 ASTM B 209
Color: Blue
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
* Tooling Plate tolerances do not apply to these widths.
58
.625 x 36.5 x 96.5 8.82 220.1
36.5 x 145 8.82 330.7
46.5 x 120.5 8.82 350.2
48.5 x 96.5 8.82 293.0
48.5 x 144.5 8.82 429.2
50.5 x 145 8.82 458.0
52.5 x 145 8.82 476.0
55.5 x 145 8.82 502.9
60.5 x 144.5 8.82 535.5
72.5 x 144.5 8.82 654.7
84.5 x 145 8.82 765.8
*96.5 x 145 8.82 874.5
.750 x 36.5 x 96.5 10.58 258.8
36.5 x 145 10.58 396.9
43.5 x 129 10.58 420.8
48.5 x 96.5 10.58 343.9
48.5 x 144.5 10.58 514.9
50.5 x 145 10.58 549.2
52.5 x 145 10.58 570.9
55.5 x 145 10.58 603.6
60.5 x 144.5 10.58 642.3
72.5 x 144.5 10.58 769.7
84.5 x 145 10.58 918.9
84.5 x 156 10.58 968.5
* 96.5 x 145 10.58 1049.0
* 96.5 x 156 10.58 1106.1
* 96.5 x 240 10.58 1701.6
ALUMINUM TOOLING PLATEHeat Treatable
6061-T651AMS QQ A 250/11 AMS 4027 ASTM B 209
Color: Blue
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
* Tooling Plate tolerances do not apply to these widths.
.875 x 48.5 x 96.5 12.35 409.5
48.5 x 144.5 12.35 601.0
52.5 x 145 12.35 666.1
60.5 x 144.5 12.35 749.7
72.5 x 144.5 12.35 916.7
*96.5 x 145 12.35 1224.0
1.00 x 36.5 x 96.5 14.11 345.0
36.5 x 145 14.11 529.3
45.9 x 137 14.11 628.8
48.5 x 96.5 14.11 458.3
48.5 x 144.5 14.11 686.7
50.5 x 145 14.11 732.3
52.5 x 145 14.11 761.3
55.5 x 145 14.11 804.8
60.5 x 144.5 14.11 856.6
72.5 x 144.5 14.11 1026.0
82.0 x 156 14.11 1279.0
*96.5 x 145 14.11 1399.0
ALUMINUM TOOLING PLATEHeat Treatable
6061-T651AMS QQ A 250/11 AMS 4027 ASTM B 209
Color: Blue
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
* Tooling Plate tolerances do not apply to these widths.
59
60
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
1.125 x 45 x 136.5 16.21 691
48.5 x 144.5 16.21 789
49.75 x 134 16.21 749
60.5 x 144.5 16.21 984
65.5 x 152 16.21 1120
1.25 x 36.5 x 96.5 17.64 440
36.5 x 145.5 17.64 664
43.5 x 129 17.64 701
48.5 x 96.5 17.64 585
48.5 x 144.5 17.64 858
50.5 x 145 17.64 915
52.5 x 145 17.64 951
60.5 x 96.5 17.64 730
60.5 x 144.5 17.64 1070
72.5 x 144.5 17.64 1309
84.5 x 156 17.64 1615
1.375 x 48.5 x 144.5 19.57 964
60.5 x 144.5 19.57 1202
72.5 x 147.5 19.57 1453
ALUMINUM TOOLING PLATEHeat Treatable
6061-T651AMS QQ A 250/11 AMS 4027 ASTM B 209
Color: Blue
* Tooling Plate tolerances do not apply to these widths.For sizes not listed above, contact your sales representative.
Close Tolerance Precision Cuttingreduces machining operations.
61
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
1.50 x 36.5 x 96.5 21.17 5283
48.5 x 96.5 21.17 7020
48.5 x 144.5 21.17 1030
55.5 x 145 21.17 1207
60.5 x 144.5 21.17 1285
72.5 x 144.5 21.17 1571
74.5 x 74.5 21.17 833
84.5 x 145 21.17 1838
* 96.5 x 156 21.17 2213
1.75 x 36.5 x 145 24.70 926
40 x 145 24.70 1015
48.5 x 144.5 24.70 1202
55 x 146 24.70 1405
60.5 x 144.5 24.70 1499
63 x 146 24.70 1609
65 x 145 24.70 1649
72.5 x 145 24.70 1839
84.5 x 145 24.70 2144
84.5 x 156 24.70 2261
ALUMINUM TOOLING PLATEHeat Treatable
6061-T651AMS QQ A 250/11 AMS 4027 ASTM B 209
Color: Blue
* Tooling Plate tolerances do not apply to these widths.
For sizes not listed above, contact your sales representative.
62
2.00 x 40.50 x 142 28.22 1150
42 x 145 28.22 1218
45.50 x 147 28.22 1337
48.50 x 144.50 28.22 1373
54.50 x 145 28.22 1580
60.50 x 141 28.22 1706
60.50 x 144.50 28.22 1713
64 x 145 28.22 18.56
72.50 x 144.50 28.22 2053
72.50 x 145 28.22 2102
84.50 x 145 28.22 2450
84.50 x 156 28.22 2583
2.25 x 41.50 x 145 31.75 1354
48.50 x 144.50 31.75 1545
49.75 x 145 31.75 1623
60.50 x 144.50 31.75 1928
65.25 x 145 31.75 2129
72.50 x 144.50 31.75 2357
84.50 x 145 31.75 2756
ALUMINUM TOOLING PLATEHeat Treatable
6061-T651AMS QQ A 250/11 AMS 4027 ASTM B 209
Color: Blue
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
Call us with your special sizes.
63
2.50 x 45.50 x 147 35.28 1672
48.50 x 144.50 35.28 1717
51 x 145 35.28 1849
55 x 145 35.28 1994
60.50 x 144.50 35.28 2141
67 x 145 35.28 2429
72.50 x 144.50 35.28 2567
80.50 x 144.50 35.28 2908
84.50 x 156 35.28 3230
2.750 x 47.25 x 145 38.80 1884
48.50 x 144.50 38.80 1888
53.50 x 145 38.80 2133
58 x 147.25 38.80 2349
60.50 X 144.50 38.80 2404
72.50 x 144.50 38.80 2823
3.00 x 48.50 x 144.50 42.34 2102
53 x 134 42.34 2131
56.50 x 141.50 42.34 2398
56.50 x 145 42.34 2458
60.50 x 144.50 42.34 2623
61.50 x 137 42.34 2528
67 x 135 42.34 2714
67 x 145 42.34 2915
72.50 x 144.50 42.34 3143
ALUMINUM TOOLING PLATEHeat Treatable
6061-T651AMS QQ A 250/11 AMS 4027 ASTM B 209
Color: Blue
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
Call us with your special sizes.
64
3.25 x 48.50 x 144.50 46.80 2278
60.50 x 144.50 46.80 2841
64 x 143 46.80 2974
72.50 x 145 46.80 3416
3.50 x 48.50 x 144.50 49.39 2403
50.25 x 145 49.39 2550
54 x 133.25 49.39 2518
54 x 140 49.39 2646
59 x 138 49.39 2850
59 x 145 49.39 2994
60.50 x 144.50 49.39 3060
64.25 x 145 49.39 3261
72.50 x 144.50 49.39 3593
76 x 152 49.39 4621
84.50 x 156 49.39 4614
4.00 x 47.25 x 142.50 56.45 2693
48.50 x 144.50 56.45 2747
60.25 x 127.50 56.45 3073
60.25 x 145 56.45 3495
60.50 x 144.50 56.45 3427
62.50 x 145 56.45 3625
65.50 x 145 56.45 3799
72.50 x 144.50 56.45 4106
76 x 152 56.45 4621
97 X 97 56.45 3763
4.50 x 48.50 x 144.50 63.50 3154
60.50 x 144.50 63.50 3855
74.50 x 87 63.50 2917
74.50 x 148.50 63.50 4978
ALUMINUM TOOLING PLATEHeat Treatable
6061-T651AMS QQ A 250/11 AMS 4027 ASTM B 209
Color: Blue
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
65
5.00 x 48.50 x 144.50 70.56 3434
53 x 146 70.56 3869
55.75 x 122.75 70.56 3422
55.75 x 145 70.56 4042
60.50 x 144.50 70.56 4284
68.50 x 138.75 70.56 4752
72.50 x 144.50 70.56 5133
5.50 x 56.50 x 151 79.00 4692
60.50 x 144.50 79.00 4796
65.50 x 147 79.00 5296
72.50 x 144.50 79.00 5747
6.00 x 48.50 x 144.50 84.67 4121
51 x 134 84.67 4100
51 x 145 84.67 4437
52.75 x 142 84.67 4494
52.75 x 145 84.67 4589
60.50 x 144.50 84.67 5140
62 x 145 84.67 5394
72.50 x 145 84.67 6307
72.50 x 156 84.67 6650
ALUMINUM TOOLING PLATEHeat Treatable
6061-T651AMS QQ A 250/11 AMS 4027 ASTM B 209
Color: Blue
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
We consider the unconventional every business day. Explore the possibilities.
66
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
6.50 x 60.50 x 144.50 91.7 5569
62.50 x 145 91.7 5891
72.50 x 145 91.7 6833
7.00 x 48.50 x 144.50 101.8 4954
60.50 x 145 101.8 6141
72.50 X 145 101.8 7358
8.00 x 48.50 x 144.50 112.8 5490
60.50 x 144.50 112.8 6848
63 x 142 112.8 7157
70.50 x 89.25 112.8 5034
70.75 x 89.50 112.8 5067
84.50 x 144.50 112.8 9768
8.125 x 52 x 101 117.0 4267
9.00 x 53.50 X 110.50 130.0 5320
64.50 x 156 130.0 9056
85 x 95 130.0 7268
10.00 x 54 x 140 144.0 7560
60.50 x 144.50 144.0 8742
60.50 X 149 144.0 9014
72.50 x 144.50 144.0 10476
10.125 x 60.50 x 144.50 145.8 8852
ALUMINUM PLATEHeat Treatable
6061-T651AMS QQ A 250/11
Color: Blue
67
ALUMINUM PLATEHeat Treatable
6061-T6 6061-T652*QQ A 250/11 QQ A 250/11
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
11.000 x 72.5 x 144.5 158.4 11523
*11.250 x 51.5 x 122.5 162.0 7097
*12.000 x 72.5 x 124.0 173.5 10788
*14.125 x 63.0 x 126.0 203.0 11212
*16.000 x 61.5 x 117.0 230.4 11512
72.5 x 96.5 230.4 11194
*Also available as Cold Compressed
Optically Guided Sawing System produces quality band saw cuts.
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
.125 x 48 x 96 1.90 60.8048 x 144 1.90 86.4048 x 192 1.90 115.260 x 96 1.90 72.0060 x 144 1.90 108.060 X 192 1.90 152.0
.190 x 48 x 96 2.79 89.2848 x 120 2.79 109.448 x 144 2.79 131.348 x 192 2.79 175.160 x 96 2.79 109.460 x 120 2.79 136.860 x 144 2.79 164.160 x 192 2.79 223.2
.250 x 48 x 96 3.67 117.448 x 120 3.67 146.848 x 144 3.67 176.148 x 192 3.67 230.460 x 96 3.67 144.060 x 100 3.67 150.060 x 120 3.67 180.060 x 144 3.67 216.060 x 192 3.67 288.0
.375 x 48 x 96 5.43 173.848 x 120 5.43 216.048 x 144 5.43 259.248 x 192 5.43 345.660 x 96 5.43 216.060 x 120 5.43 270.060 x 144 5.43 324.060 x 192 5.43 432.0
.500 x 48 x 96 7.20 230.448 x 120 7.20 288.048 x 144 7.20 345.648 x 192 7.20 460.860 x 96 7.20 288.060 x 120 7.20 360.060 x 144 7.20 432.060 x 192 7.20 576.0
ALUMINUM TREAD PLATE
6061-T6Mill Finish
Raised Diamond Pattern One Side
68
69
.375 x 48.5 x 144.5 5.45 265
.500 x 48.5 x 144.5 7.20 350
.750 x 48.5 x 144.5 10.81 525
1.00 x 48.5 x 144.5 14.40 700
48.5 x 156.0 14.40 756
1.25 x 48.5 x 144.5 18.00 876
60.5 x 157.0 18.00 1187
1.50 x 48.5 x 144.5 21.60 1051
51 x 155.0 21.60 1185
52 x 166.0 21.60 1294
52.8 x 155.5 21.60 1231
69 x 174.8 21.60 1809
1.75 x 48.5 x 144.5 25.20 1226
60.5 x 154.5 25.20 1636
2.00 x 48.5 x 144.5 28.80 1401
52.2 x 162.5 28.80 1706
2.25 x 48.5 x 146.5 32.40 1598
57.3 x 145.0 32.40 1869
2.50 x 48.5 x 144.5 36.01 1752
55 x 158.5 36.01 2179
60.5 x 144.5 36.01 2186
2.75 x 49.5 x 146.5 41.30 2059
57.2 x 149.5 41.30 2351
3.00 x 48.5 x 144.5 44.80 2102
55 x 163.0 44.80 2690
60.8 x 150.8 44.80 2750
ALUMINUM PLATEHeat Treatable
7050-T7451AMS 4050 BMS 7-323 BAMS* 516-03 BSS** 7055
DMS 2233 MMS 1420 MIL STD 2154 CLA
(Where applicable)Color: Yellow
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
*BAMS specification formerly known as CMS
**BSS 7055 specification formerly known as BAC 5439 CLA
70
3.50 x 44 x 161 52.20 2479
48.50 x 144.50 52.20 2455
55 x 153.50 52.20 2955
59 x 154 52.20 3180
4.00 x 45.80 x 168.80 60.60 3092
48.50 x 144.50 60.60 2949
55 x 130 60.60 2860
4.25 x 39 x 81.25 61.20 1347
4.375 x 22 x 87 63.00 837.4
30 x 97 63.00 1273
4.50 x 48.50 x 144.50 68.41 3332
48.80 x 179.50 68.41 3941
4.75 x 48.50 x 144.50 70.00 3407
5.00 x 48.50 x 144.50 76.00 3698
53 x 164 76.00 4346
5.118 x 55.30 x 100.10 73.70 2833
5.50 x 52 x 145 82.50 4147
6.00 x 50 x 168 90.60 5040
7.00 x 42.50 x 121 105.00 3599
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
ALUMINUM PLATEHeat Treatable
7050-T7451AMS 4050 BMS 7-323 BAMS* 516-03 BSS** 7055
DMS 2233 MMS 1420 MIL STD 2154 CLA
(Where applicable)Color: Yellow
*BAMS specification formerly known as CMS
**BSS 7055 specification formerly known as BAC 5439 CLA
AERO
COMMERCIAL
Also supplying the AerospaceIndustry:
2014 7050
2024 7075
2124 7475
FULLY CERTIFIED
Tempers:
T351 T851 T7651
T651 T7351
T652 T7451
Sheets: Alclad/Bare
2024 7075
0-Temper
T6 T3 T81 T73
Fully Certified to:
AMS DMS ASTM
BMS FMS BSS
BAMS MMS MIL STD
AMS - QQA
Additional Specifications Available Upon Request
Size Range From:
Thickness: 1/4” to 12”
Widths: Standards 36” - 72”Custom Widths and Lengths Available Upon Request
SPACE
SPACE EXPLORATION
MILITARY
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
.750 x 48.5 x 144.5 10.81 526
1.00 x 48.5 x 144.5 14.39 700
1.25 x 48.5 x 144.5 18.60 876
1.50 x 48.5 x 144.5 21.60 1061
53 x 144.5 21.60 1148
2.00 x 48.5 x 144.5 28.80 1401
2.25 x 48 x 141 32.40 1523
2.75 x 45.5 x 126 41.30 1577
45.5 x 132 41.30 1652
58.5 x 166.5 41.30 2679
144.5
ALUMINUM PLATEHeat Treatable
7050-T7651AMS 4201 DMS 2233
BSS** 7055 MIL STD 2154 CL A BAMS* 516-01
Color: Orange
To complement our Aerospace Plate products,
see a full listing of our Aerospace Sheet products
on pages 43 to 45 and pages 51 to 53.
73
*BAMS specification formerly known as CMS
**BSS 7055 specification formerly known as BAC 5439 CLA
74
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
.250 x 48.5 x 144.5 3.63 179.9
60.5 x 144.5 3.65 218.6
.3125 x 48.5 x 144.5 4.54 221.2
.375 x 48.5 x 144.5 5.45 265.4
.500 x 48.5 x 144.5 7.27 353.9
60.5 x 144.5 7.27 437.1
.625 x 48.5 x 144.5 9.09 442.4
.750 x 48.5 x 144.5 10.91 530.9
60.5 x 144.5 10.91 655.7
1.00 x 48.5 x 144.5 14.54 707.6
56 x 144.5 14.54 809.2
60.5 x 144.5 14.54 882.7
1.25 x 48.5 x 144.5 18.18 884.8
60.5 x 144.5 18.18 1093.0
1.50 x 48.5 x 144.5 21.82 1061.9
60.5 x 144.5 21.82 1311.0
1.75 x 48.5 x 144.5 25.45 1238.6
52 x 164 25.45 1492.0
2.00 x 48.5 x 144.5 29.09 1415.8
60.5 x 144 29.09 1748.0
72.5 x 144.5 29.09 2116.3
2.25 x 48.5 x 144.5 32.72 1592.4
60.5 x 144.5 32.72 1986.4
144.52.50 x 48.5 x 144.5 36.36 1769.6
60.5 x 144.5 36.36 2207.4
ALUMINUM PLATEHeat Treatable
7075-T651AMS QQ A 250/12 AMS 4045 ASTM B 209
Color: Black
Contact your sales representative for special sizes.
2.75 x 48.5 x 144.5 39.60 1927
60.5 x 144.5 39.60 2404
3.00 x 48.5 x 144.5 43.64 2123
60.5 x 144.5 43.64 2623
3.50 x 48.5 x 144.5 50.90 2477
60.5 x 144.5 50.90 3060
63.3 x 168.5 50.90 3733
4.00 x 48.5 x 144.5 58.18 2831
52.0 x 155.0 58.18 3244
60.5 x 144.5 58.18 3496
4.50 x 48.5 x 144.5 64.45 3137
52.0 x 155.0 64.45 3627
60.5 x 144.5 64.45 3934
5.00 x 48.5 x 144.5 72.72 3539
60.5 x 144.5 72.72 4415
6.00 x 48.5 x 144.5 87.26 4247
60.5 x 144.5 87.26 5298
7.00 x 60.5 x 144.5 101.80 6182
8.00 x 60.5 x 144.5 115.20 6993
9.00 x 60.5 x 144.5 130.90 7868
* 9.00 x 60.5 x 144.5 130.90 7947
*10.00 x 60.5 x 147.5 145.40 8924
*12.00 x 60.5 x 125.9 172.80 9140
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
ALUMINUM PLATEHeat Treatable
7075-T651AMS QQ A 250/12 AMS 4045 ASTM B 209
Color: Black
* T652 Cold Compressed.
75
76
.2500 x 48.5 x 144.5 3.63 179.9
.3125 x 48.5 x 144.5 4.54 221.2
.3750 x 48.5 x 144.5 5.45 265.4
.5000 x 48.5 x 144.5 7.27 353.9
.6250 x 48.5 x 144.5 9.09 442.4
.7500 x 48.5 x 144.5 10.91 530.9
.8125 x 48.5 x 148.0 11.82 583.0
1.000 x 48.5 x 144.5 14.54 707.6
1.250 x 48.5 x 144.5 18.18 884.7
1.500 x 48.5 x 144.5 21.82 1061.9
60.5 x 144.5 21.82 1311.0
1.750 x 48.5 x 144.5 25.45 1238.6
55.2 x 73.5 25.45 710.0
60.5 x 148.0 25.45 1566.0
2.000 x 48.5 x 144.5 29.09 1415.8
72.5 x 144.5 29.09 2095.0
2.250 x 48.5 x 152.0 32.72 1659.0
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
ALUMINUM PLATEHeat Treatable
7075-T7351AMS QQ A 250/12 AMS 4078 ASTM B 209
BSS* 7055 MIL STD 2154 CLA
Color: Pink
*BSS 7055 specification formerly known as BAC 5439 CLA
77
2.75 x 48.5 x 144.5 39.99 1948
53.0 x 165.5 39.99 2412
3.00 x 48.5 X 144.5 43.64 2124
3.50 x 48.5 x 144.5 50.90 2477
60.5 x 144.5 50.90 3059
4.00 x 46.0 x 151.3 58.18 2783
48.5 x 144.5 58.18 2831
4.50 x 48.5 x 144.5 65.45 3185
51.8 x 155.3 65.45 3620
5.00 x 48.5 x 144.5 72.72 3539
51.8 x 155.5 72.72 4027
5.75 x 48.5 z 146.6 82.80 4088
6 x 60.5 x 144.5 87.26 5298
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
ALUMINUM PLATEHeat Treatable
7075-T7351AMS QQ A 250/12 AMS 4078 ASTM B 209
BSS* 7055 MIL STD 2154 CLA
Color: Pink
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
ALUMINUM PLATEHeat Treatable
7475-T7351AMS 4202 MIL STD 2154 CLA BAMS* 516-02 BSS** 7055
2.00 x 60.5 x 144.5 28.80 1748
3.00 x 60.5 x 144.5 44.00 2622
*BSS 7055 specification formerly known as BAC 5439 CLA
*BAMS specification formerly known as CMS
**BSS 7055 specification formerly known as BAC 5439 CLA
78
7 x 60.5 x 185 103.6 8099
8 x 60.5 x 185 118.2 9236
9 x 60.5 x 185 132.7 10,372
10 x 60.5 x 185 147.3 11,509
11 x 60.5 x 185 161.8 12,646
12 x 60.5 x 185 176.4 13,782
14 x 63 x 185 205.4 16,716
16 x 63 x 185 234.5 19,083
Alpase
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
ALUMINUM PLATE
M-1 Aluminum Mold Plate + .125 thickness tolerance
+.250 width and length tolerance
TM
TM
*Also available:
Thickness - 2” min. to 30” (as produced); quick delivery of custom thickness between 2” - 30” avail-
able; forged thickness over 30” by inquiry.
Width - Up to 63” (as produced); forged widths over 63” by inquiry.
Lengths - Up to 185” (as produced); forged lengths over 185” by inquiry.
Yarde Metals is a stocking distributor of Mold Plate prod-ucts - designed especially for the plastic & molding indus-tries.
� Develped especially for the Molding Industry � Engineered for a variety of mold
applications � Fully weldable � Can be hard coat anodized & nickel coated
� Capable of finishes from etched to highly polished
79
.250 x 48.5 x 144.5 3.60 177.0
60.5 x 144.5 3.60 221.0
.3125 x 48.5 x 144.5 4.50 222.0
60.5 x 144.5 4.50 276.0
.375 x 48.5 x 144.5 5.40 266.0
60.5 x 144.5 5.40 332.0
.500 x 48.5 x 144.5 7.20 354.0
60.5 x 144.5 7.20 441.0
.625 x 48.5 x 144.5 9.00 443.0
60.5 x 144.5 9.00 552.0
.750 x 48.5 x 144.5 10.80 531.0
60.5 x 144.5 10.80 663.0
.875 x 48.5 x 144.5 12.60 623.0
60.5 x 144.5 12.60 773.0
1.00 x 48.5 x 144.5 14.40 708.0
60.5 x 144.5 14.40 883.0
1.25 x 48.5 x 144.5 18.00 885.0
60.5 x 144.5 18.00 1104.0
1.50 x 48.5 x 144.5 21.60 1062.0
60.5 x 144.5 21.60 1325.0
1.75 x 48.5 x 144.5 25.20 1239.0
60.5 x 144.5 25.20 1546.0
2.00 x 48.5 x 144.5 28.80 1416.0
60.5 x 144.5 28.80 1766.0
2.25 x 48.5 x 144.5 32.40 1593.0
Alcoa
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
� Anodiazable � Suitable for welding � Good substrate for a variety of organic coatings
� Continuously fed, eliminating defects from lapses and seams
� Thermally stabilized
ALUMINUM PLATE
MIC-6 Cast Aluminum Tooling Plate +/- .005 thickness tolerance from nominal on 1/4” - 4”
.015” flatness tolerance on 1/4” to 5/8” & .005” on 3/4” to 4”
TM
TM
80
.500 x 38.25 x 144.50 7.20 280.0
48.50 x 96.50 7.20 237.0
48.50 x 144.50 7.20 354.0
55.50 x 144.50 7.20 401.0
60.50 x 144.50 7.20 442.0
*72.50 x 144.50 7.20 523.8
.625 x 48.50 x 96.50 9.00 296.0
48.50 x 144.50 9.00 443.0
60.50 x 144.50 9.00 552.0
*72.50 x 144.50 9.00 655.0
.750 x 38.25 x 144.50 10.80 419.0
48.50 x 96.50 10.80 355.0
55.50 x 144.50 10.80 602.0
60.50 x 144.50 10.80 663.0
*72.50 x 144.50 10.80 786.0
.875 x 48.50 x 96.50 12.60 414.0
x 60.50 x 144.50 12.60 764.9
1.00 x 38.25 x 144.50 14.40 559.0
48.50 x 96.50 14.40 473.0
48.50 x 144.50 14.40 700.8
55.50 x 144.50 14.40 802.0
60.50 x 144.50 14.40 883.0
*72.50 x 144.50 14.40 1048.0
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
� Superior corrosion resistance � Premium anodizing & painting characteristics
� Vacuum & pressure integrity � Fully weldable
� Can be hard coat annodized & nickel coated
� RMS 18-19
ALUMINUM PLATE
K100-S Cast Aluminum Tooling Plate +/- .005 thickness tolerance
+.125 - 0”width and length tolerance
.015 - .381 mm flatness tolerance on .250” - .500” & .010 - .254 mm on .625” - 8.00”
TM
TM Alpase
*Supplied as K100. K100 sizes and tolerances:
Thickness - .250” through 30” Width - 12” through 120 1/2” Length - 24” through 325”
Tolerances: Tolerances are based upon the size required and will be specified at the time of quote
81
1.25 x 48.5 x 96.5 18.00 591.0
48.5 x 144.5 18.00 885.0
60.5 x 144.5 18.00 1104.0
*72.5 x 144.5 18.00 1309.0
1.50 x 48.5 x 96.5 21.60 710.0
48.5 x 144.5 21.60 1062.0
60.5 x 144.5 21.60 1325.0
*72.5 x 144.5 21.60 1572.0
1.75 x 48.5 x 96.5 25.20 828.0
48.5 x 144.5 25.20 1239.0
60.5 x 144.5 25.20 1546.0
2.00 x 48.5 x 96.5 28.80 946.0
48.5 x 144.5 28.80 1416.0
60.5 x 144.5 28.80 1766.0
2.25 x 60.5 x 144.5 32.40 1967.0
2.50 x 48.5 x 144.5 36.00 1770.0
60.5 x 144.5 36.00 2185.0
2.75 x 48.5 x 96.5 39.60 1287.1
3.00 x 60.5 x 144.5 43.20 2649.0
3.50 x 60.5 x 144.5 50.40 3091.0
4.00 x 60.5 x 144.5 57.60 3523.0
4.50 x 48.5 x 96.5 64.80 2106.0
5.00 x 48.5 x 96.5 72.00 2364.0
6.00 x 48.5 x 96.5 86.40 2808.0
Est. lbs. Est. lbs.THK Width Length per sq. ft. per plate
� Superior Corrosion Resistance � Premium Anodizing & Painting Characteristics
� Vacuum & Pressure Characteristics � Fully Weldable
� Can be Hard Coat Annodized & Nickel Coated
� RMS 18-19
ALUMINUM PLATE
K100-S Cast Aluminum Tooling Plate +/- .005 thickness tolerance
+.125 - 0”width and length tolerance
.015 - .381 mm flatness tolerance on .250” - .500” & .010 - .254 mm on .625” - 8.00”
TM
TM Alpase
*Supplied as K100. K100 sizes and tolerances:
Thickness - .250” through 30” Width - 12” through 120 1/2” Length - 24” through 325”
Tolerances: Tolerances are based upon the size required and will be specified at the time of quote
Austenitic stainless steels contain chromium and nickel as the principal alloying elements. They can be hardened only by cold working. In the annealed condition, they are not attracted to a magnet but maybecome slightly magnetic after cold working.
301 The high tensile properties of the sheets are theresult of cold working; used in parts requiring higherstrength characteristics than are found in annealedsheets.
303 Is the most readily machinable of all 300 seriesgrades. It has similar physical and corrosion resistantproperties to grade 304, with the exception of additionsof .15/.35 sulfur to enhance machinability.
304 With a carbon content of .08% max, it is the mostuniversally used grade. Known as "18-8", it has goodcorrosion resistance in many corrosive environments.This weldable and formable stainless has excellentmechanical properties while offering moderate machinability.
304L (Extra Low Carbon) With a carbon content limited to .03 percent maximum, the hazards of harmful CAR-BIDE PRECIPITATION that occur between 800-1500 Fare virtually eliminated. All other properties similar to304. Recommended for use in assemblies which arefabricated by welding and cannot be subsequentlyannealed.
304LYM “Yarde Melt” is a superior quality plate pro-duced specifically to give you optimal machining charac-teristics, with improved machined surface finishes &dimensional stability. Prodec offers consistent qualityfrom plate to plate and heat to heat.
304 #4 Finish Standard polish sheet (approximately150/180 grit); polished on one side.
304 #8 Finish Mirror finish; one side
309 Increased chromium and nickel contents for highresistance to oxidation up to 2000 F with high tensilestrength at elevated temperatures. Corrosion resistanceis excellent. Readily welded and machined.
309S Carbon content held to .08 percent maximum toreduce problems with intergranular corrosion.
STAINLESS SHEET & PLATE GUIDE to
AUSTENITIC GRADESNon-Magnetic Non-Heat Treatable
82
83
310 Resists oxidation up to 2100 F while maintaininghigh strengths and corrosion resistance.
310S Carbon content .08 percent maximum to reduceproblems with intergranular corrosion.
316 Has excellent corrosion resistance with slightlymore nickel than Type 304 and with the addition of 2-3% molybdenum. It will resist the pitting action in phosphoric acid, acetic acid and sea water. For maximum corrosion resistance, materials should be inthe annealed condition and parts should be passivated.
316L (Extra Low Carbon) .03 max resists intergranularcorrosion from welding.
316LYM “Yarde Melt” is a superior quality plate pro-duced specifically to give you optimal machining charac-teristics, with improved machined surface & dimensionalstability. Prodec offers consistent quality from plate toplate and heat to heat.
316L #4 Finish Standard polish sheet (approximately150/180); polished on one side.
317/317L A preferred grade for severe corrosive andhigh temperature environments. Chromium, nickel andmolybdenum have been added to the standard 316grade to produce these higher service properties. Thisnon-magnetic and non-hardenable grade can be easilywelded by all commercial processes. “L” grade is rec-ommended when parts cannot be annealed after weld-ing.
321 Titanium Stabilized. Excellent resistance to corrosion and oxidation while possessing high creepstrength. The possibility of intergranular corrosion is reduced. This alloy is used primarily for parts fabricated by welding without post-weld annealing. Many applications for the aircraft industry.
330 Heat and corrosion resistant alloy, weldable andmachinable. Possessing good thermal shock and oxi-dation resistant properties at high temperatures.
347 Columbium-Tantalum Stabilized. Virtually overcomes the problems of carbide precipitationand intergranular corrosion. For parts fabricated bywelding which cannot be subsequently annealed.
STAINLESS SHEET & PLATE GUIDE to
AUSTENITIC GRADESNon-Magnetic Non-Heat Treatable
84
Martensitic Stainless Steels are straight-chromiumtypes bearing AISI 400 series numbers. They can behardened to tensile strengths exceeding 200,000 psi byheat treatment. They resist corrosion in mild environments and they are always strongly magnetic.
403 Used in blade applications of turbines and jetengine compressors. Well suited for highly stressedparts. Resists atmosphere corrosion.
410 General purpose chromium grade is magnetic in allconditions. Poses good mechanical properties and ishardened by conventional heat treating. High degree ofresistance to atmospheric corrosion; maximum resistance is obtained by hardening and polishing.
416 Is a corrosion resisting chromium steel to whichelements have been added to improve the machiningand non-seizing characteristics. 416 is magnetic in allconditions.
440C High carbon general purpose steel can be heattreated to “Rockwell C 60” for maximum hardness.Good corrosion resistance and wear resistance. Usedin valve parts, steel balls and seats.
STAINLESS SHEET & PLATE GUIDE to
MARTENSITIC GRADESMagnetic Heat Treatable
Ferritic Steels are straight-chromium types also identi-fied by AISI 400 series numbers. They have low carbon-to-chromium ratio and are not hardenable by heat treat-ment. However, they are strongly magnetic and havegood resistance to corrosion and oxidation.
430 12% max carbon, non-hardenable grade nearlyapproximates the corrosion resistance of 304. It hasgood cold forming properties and is most popular inconsumer product. Resists oxidation up to 1500 F.
430 Brite Annealed Atmospheric controlled processingenhances surface finish. Used in a variety ofinterior/exterior trim applications - notably, auto trim.
STAINLESS SHEET & PLATE GUIDE to
FERRITIC GRADESMagnetic Non-Heat Treatable
85
86
Precipitation Hardening grades are martensitic stainless steel and can be precipitation hardened by alow temperature heat treatment, thereby minimizingscaling and distortion, while allowing parts to bemachined to close tolerances prior to heat treatment.Developed strengths up to 200,000 psi tensile in condi-tion H-900 and they are magnetic.
15-5 Is a martensitic precipitation hardening (maraging)stainless steel that combines high strength and hard-ness with excellent corrosion resistance. It has goodforgeability and good transverse mechanical properties.
17-4 Is a chromium-nickel grade that can be hardenedby a relatively low temperature thermal treatment. Possessing excellent mechanical properties with mini-mum scaling or distortion. Corrosion resistance similarto 304 in most environments. Readily weldable by conventional methods.
17-7 Is a chromium-nickel stainless steel that has theeasy-to-work advantages of the chromium-nickel stainless grades, and yet is capable of being hardened. In the annealed (Condition A) state, it has excellent fabricating properties and it can be precipitation hardened by a simple heat treatment.
STAINLESS SHEET & PLATE GUIDE to
PRECIPITATION GRADESMagnetic Heat Treatable
87
C MN P S SI CR NI CU MO
Max Max Max Max Max 16.00 6.00 Max Max
.15 2.00 0.45 0.30 1.00 18.00 8.00 .50 .50
30 (.012) .504 15.1
28 (.016) .672 20.2
24 (.025) 1.050 31.5
22 (.032) 1.344 40.3
20 (.035) 1.512 45.4
18 (.050) 2.100 63.0
16 (.059) 2.646 79.4
14 (.080) 3.360 100.8
13 (.090) 3.780 113.4
11 (.125) 5.250 157.5
Est. lbs. Est. lbs.Gage THK per sq. ft. per sheet
1/4 hard 125,000 75,000 25%
1/2 hard 150,000 110,000 18%
STAINLESS SHEETS
TYPE 301High Tensile Stainless Sheet
SPECIFICATIONS
MIL- S- 5059 ASTM A 177
Tensile Yield Strength ElongationCondition or Strength at .2% offset in 2" thk (min.)
Temper (min.) (min.)
Physical Properties
.016 and over
CONDITION 1/4 AND 1/2 HARD Stocked 36” x 120”
88
26 (.018) 36 x 96 .756 18.14
36 x 120 .756 22.68
48 x 96 .756 24.19
48 x 120 .756 30.24
24 (.024) 36 x 96 1.008 24.19
36 x 120 1.008 30.24
48 x 96 1.008 32.26
48 x 120 1.008 40.32
60 x 120 1.008 50.98
22 (.030) 36 x 96 1.260 30.24
36 x 120 1.260 37.80
48 x 96 1.260 40.32
48 x 120 1.260 50.40
60 x 120 1.260 63.72
STAINLESS SHEET2B Bright Cold Rolled, Annealed
304ASTM A 167 ASTM A 240 AMS 5513
Color: Pink
Est. lbs. Est. lbs.Gage THK Width Length per sq. ft. per sheet
89
20 (.035) 36 x 96 1.512 36.29
36 x 120 1.512 45.36
48 x 96 1.512 48.38
48 x 120 1.512 60.48
48 x 144 1.512 72.58
60 x 120 1.512 76.46
18 (.048) 36 x 96 2.016 48.38
36 x 120 2.016 60.48
36 x 144 2.016 72.58
48 x 96 2.016 64.51
48 x 120 2.016 80.64
48 x 144 2.016 96.77
60 x 120 2.016 100.80
60 x 144 2.016 120.96
72 x 120 2.016 122.34
STAINLESS SHEET2B Bright Cold Rolled, Annealed
304 ASTM A 167 ASTM A 240 AMS 5513
Color: Pink
Est. lbs. Est. lbs.Gage THK Width Length per sq. ft. per sheet
Laser processing to your exact dimensions.
90
STAINLESS SHEET2B Bright Cold Rolled, Annealed
304ASTM A 167 ASTM A 240 AMS 5513
Color: Pink
Est. lbs. Est. lbs.Gage THK Width Length per sq. ft. per sheet
16 (.059) 36 x 96 2.520 60.5
36 x 120 2.520 75.6
36 x 144 2.520 90.7
48 x 96 2.520 80.6
48 x 120 2.520 100.8
48 x 144 2.520 121.0
60 x 96 2.520 100.8
60 x 120 2.520 126.0
60 x 144 2.520 151.2
72 x 120 2.520 152.9
14 (.075) 36 x 96 3.150 75.6
36 x 120 3.150 94.5
36 x 144 3.150 113.4
48 x 96 3.150 100.8
48 x 120 3.150 126.0
48 x 144 3.150 151.2
60 x 120 3.150 157.5
60 x 144 3.150 189.0
72 x 120 3.150 189.0
“L” grade available.
Refer to pgs. 114-115 for Expanded Metal sizes.
91
Est. lbs. Est. lbs.Gage THK Width Length per sq. ft. per sheet
13 (.090) 36 x 96 3.780 90.7
36 x 120 3.780 113.4
48 x 96 3.780 121.0
48 x 120 3.780 151.2
48 x 144 3.780 183.5
60 x 120 3.780 191.2
12 (.105) 36 x 96 4.410 105.8
36 x 120 4.410 132.3
48 x 48 4.410 71.4
48 x 96 4.410 141.1
48 x 120 4.410 176.4
48 x 144 4.410 211.7
60 x 96 4.410 176.4
60 x 120 4.410 220.5
60 x 144 4.410 264.6
72 x 120 4.410 264.6
11 (.120) 36 x 96 5.040 121.0
36 x 120 5.040 151.2
36 x 144 5.040 181.4
48 x 96 5.040 161.3
48 x 120 5.040 201.6
48 x 144 5.040 241.9
60 x 120 5.040 252.0
60 x 144 5.040 302.4
72 x 120 5.040 302.4
STAINLESS SHEET2B Bright Cold Rolled, Annealed
304ASTM A 167 ASTM A 240 AMS 5513
Color: Pink
“L” grade available.
Shearing to width and lengths.
92
Est. lbs. Est. lbs.Gage THK Width Length per sq. ft. per sheet
10 (.135) 48 x 96 5.670 181.4
48 x 120 5.670 226.8
48 x 144 5.670 272.2
60 x 120 5.670 283.5
60 x 144 5.670 340.2
8 (.165) 48 x 96 6.930 221.8
48 x 120 6.930 277.2
48 x 144 6.930 336.4
7 (.187) 48 x 96 7.871 251.9
48 x 120 7.871 314.8
48 x 144 7.871 377.8
60 x 96 7.871 317.8
60 x 120 7.871 393.6
60 x 144 7.871 476.6
STAINLESS SHEET2B Bright Cold Rolled, Annealed
304ASTM A 167 ASTM A 240 AMS 5513
Color: Pink
“L” grade available.
Plasma Cutting underwater reduces distortion, enhancing piece per part accuracy. Excellent for
rings, discs, cams or most any geometry.
STAINLESS SHEETCold Rolled, Annealed and Polished
304 #4 FinishASTM A 167 ASTM A 240 AMS 5513
Color: Pink
Est. lbs. Est. lbs.Gage THK Width Length per sq. ft. per sheet
26 (.018) 48 x 96 .7646 24.41
48 x 120 .7646 30.59
24 (.024) 36 x 120 1.008 30.59
48 x 96 1.008 32.26
48 x 144 1.008 40.78
22 (.030) 36 x 120 1.260 38.23
48 x 96 1.260 40.32
48 x 120 1.260 50.40
48 x 144 1.260 61.17
60 x 120 1.260 63.72
20 (.035) 36 x 96 1.490 35.68
36 x 120 1.490 44.60
48 x 96 1.490 47.20
48 x 120 1.490 59.47
48 x 144 1.490 71.37
60 x 120 1.490 74.34
18 (.048) 36 x 96 2.016 48.94
36 x 120 2.016 61.17
48 x 96 2.016 65.25
48 x 120 2.016 81.56
48 x 144 2.016 97.87
“L” grade available.
93
STAINLESS SHEETCold Rolled, Annealed and Polished
304 #4 FinishASTM A 167 ASTM A 240 AMS 5513
Color: Pink
Est. lbs. Est. lbs.Gage THK Width Length per sq. ft. per sheet
16 (.059) 36 x 96 2.520 61.2
36 x 120 2.520 76.5
48 x 96 2.520 881.6
48 x 120 2.520 101.9
48 x 144 2.520 122.3
14 (.075) 36 x 96 3.150 76.5
36 x 120 3.150 95.6
48 x 96 3.150 101.9
48 x 120 3.150 127.4
48 x 144 3.150 152.9
13 (.090) 48 x 96 3.780 122.3
48 x 120 3.780 152.9
48 x 144 3.780 183.5
60 x 120 3.780 191.6
11 (.120) 48 x 96 5.040 163.1
48 x 120 5.040 203.9
10 (.135) 48 x 96 5.735 183.5
48 x 120 5.735 229.4
7 (.1875) 48 x 96 7.965 254.9
48 x 120 7.965 318.6
“L” grade available.
94
STAINLESS PLATEHot Rolled, Annealed and Pickeled
304 #4 FinishASTM A 167/240 AMS 5513
Color: Pink
1/4 x 48 x 96 11.16 357.12
48 x 120 11.16 446.40
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet
STAINLESS SHEETCold Rolled, Polished
304 #8 FinishASTM A 167 ASTM A 240 AMS 5513
Est. lbs. Est. lbs.Gage THK Width Length per sq. ft. per sheet
20 (.035) 48 x 120 1.486 59.47
18 (.048) 48 x 120 2.039 81.56
16 (.059) 48 x 120 2.506 100.25
14 (.075) 48 x 120 3.186 127.44
12 (.105) 48 x 120 4.460 178.42
11 (.120) 48 x 120 5.050 203.90
95
26 (.018) 48 x 96 .756 24.47
48 x 120 .756 30.59
24 (.024) 36 x 96 1.008 24.19
36 x 120 1.008 30.24
48 x 96 1.008 32.26
48 x 120 1.008 40.32
60 X 120 1.008 50.98
22 (.030) 36 x 96 1.260 30.24
36 x 120 1.260 37.80
48 x 96 1.260 40.78
48 x 120 1.260 50.40
60 x 120 1.260 63.72
20 (.035) 36 x 96 1.512 36.29
36 x 120 1.512 45.36
48 x 120 1.512 60.48
60 x 120 1.512 76.46
18 (.048) 36 x 96 2.016 48.38
36 x 120 2.016 60.48
48 x 96 2.016 64.51
48 x 120 2.016 80.64
60 x 120 2.016 101.95
16 (.060) 36 x 96 2.520 60.48
36 x 120 2.520 75.60
48 x 96 2.520 80.64
48 x 120 2.520 100.80
60 x 120 2.520 127.40
14 (.075) 48 x 96 3.150 100.8
48 x 120 3.150 126.0
60 x 120 3.150 159.3
Est. lbs. Est. lbs.Gage THK Width Length per sq. ft. per sheet
STAINLESS SHEET2B Bright Cold Rolled, Annealed
316LASTM A 167 ASTM A 240 AMS 5524
Color: Purple and Blue
96
12 (.105) 48 x 96 4.410 141.1
48 x 120 4.410 176.4
60 x 120 4.410 223.0
11 (.120) 36 x 96 5.040 121.0
36 x 120 5.040 151.2
48 x 96 5.040 163.1
48 x 120 5.040 201.6
60 x 120 5.040 254.9
10 (.135) 48 x 96 5.670 183.5
48 x 120 5.670 226.8
48 x 144 5.670 272.2
60 x 120 5.670 286.7
8 (.165) 48 x 120 6.930 277.2
7 (.187) 48 x 96 7.871 254.2
48 x 120 7.871 314.8
48 x 120 7.871 317.8
STAINLESS SHEET2B Bright Cold Rolled, Annealed
316LASTM A 167 ASTM A 240 AMS 5524
Color: Purple & Blue
Est. lbs. Est. lbs.Gage THK Width Length per sq. ft. per sheet
97
22 (.030) 48 x 120 1.274 50.98
20 (.035) 48 x 120 1.486 59.47
18 (.048) 48 x 120 2.039 81.56
16 (.059) 48 x 120 2.506 100.30
14 (.075) 48 x 120 3.186 127.40
12 (.105) 48 x 120 4.460 178.40
11 (.120) 48 x 120 5.098 203.90
STAINLESS SHEET
316L #4ASTM A 167 ASTM A 240 AMS 5524
Est. lbs. Est. lbs.Gage THK Width Length per sq. ft. per sheet
STAINLESS SHEET2D Dull Cold Rolled, Annealed
321ASTM A 167 ASTM A 240 AMS 5510
Color: Black
Est. lbs. Est. lbs.Gage THK Width Length per sq. ft. per sheet
25 (.020) 36 x 120 .840 25.20
24 (.025) 36 x 120 1.050 31.50
22 (.032) 36 x 120 1.260 37.80
20 (.035) 36 x 120 1.512 45.36
48 x 120 1.512 60.48
19 (.040) 36 x 120 1.680 50.40
48 x 120 1.680 67.20
18 (.050) 36 x 120 2.100 63.00
48 x 120 2.100 84.00
16 (.059) 36 x 120 2.646 79.38
48 x 120 2.646 105.80
14 (.080) 36 x 120 3.360 100.80
48 x 120 3.360 134.40
13 (.090) 48 x 120 3.780 151.20
12 (.109) 48 x 120 4.578 183.10
11 (.125) 48 x 120 5.250 210.00
98
Shearing, Plasma or Water Jet Processing.Contact your sales representative.
STAINLESS PLATEHot Rolled, Annealed & Pickled
303ASTM A 480 ASTM A 895
Color: Red
THK Width LengthEst. lbs.
per sq. ft.
3/16 x 96 x 240 8.58
1/4 x 96 x 240 11.16
5/16 x 96 x 240 13.75
3/8 x 96 x 240 16.50
1/2 x 96 x 240 21.66
5/8 x 96 x 240 26.83
3/4 x 96 x 240 32.12
1 x 96 x 240 42.67
1 1/8 x 96 x 240 47.83
1 1/4 x 96 x 240 53.00
1 1/2 x 96 x 240 63.34
2 x 96 x 200 84.01
*2 1/4 x 60/96 x 96/144 94.00
*2 1/2 x 60/96 x 96/144 105.10
*3 x 60/96 x 96/144 126.30
*3 1/4 x 60/96 x 96/144 136.60
*3 1/2 x 60/96 x 96/144 147.00
*4 x 60/96 x 96/144 167.60
* Random widths and lengths.
99
100
3/16 x 48 x 96 8.58
48 x 120 8.58
48 x 144 8.58
60 x 120 8.58
72 x 240 8.58
96 x 240 8.58
1/4 x 48 x 48 11.16
48 x 96 11.16
48 x 120 11.16
48 x 144 11.16
60 x 120 11.16
60 x 240 11.16
72 x 240 11.16
96 x 240 11.16
5/16 x 48 x 96 13.75
48 x 120 13.75
60 x 240 13.75
72 x 240 13.75
96 x 240 13.75
3/8 x 48 x 96 16.50
48 x 120 16.50
60 x 240 16.50
72 x 240 16.50
STAINLESS PLATEHot Rolled, Annealed & Pickled
304 304LASTM A 167/240 ASTM A 167/240
AMS 5513 AMS 5511
Pink - Color - Pink & Brown
THK Width LengthEst. lbs.
per sq. ft.
Shearing, Plasma and Water Jetcutting to your specifications.
1/2 x 48 x 48 21.66
48 x 96 21.66
48 x 120 21.66
48 x 144 21.66
60 x 120 21.66
60 x 240 21.66
72 x 240 21.66
96 x 240 21.66
5/8 x 48 x 96 26.83
60 x 120 26.83
78 x 200 26.83
96 x 240 26.83
3/4 x 48 x 96 32.12
60 x 120 32.12
78 x 200 32.12
96 x 240 32.12
7/8 x 48 x 96 37.29
60 x 120 37.29
78 x 200 37.29
96 x 240 37.29
1 x 48 x 96 42.67
60 x 120 42.67
78 x 200 42.67
96 x 240 42.67
STAINLESS PLATEHot Rolled, Annealed & Pickled
304 304LASTM A 167/240 ASTM A 167/240
AMS 5513 AMS 5511
Pink - Color - Pink & Brown
THK Width LengthEst. lbs.
per sq. ft.
101
Plasma and Water Jet cutting to your configurations.
1 1/8 x 48 x 96 47.93
60 x 120 47.83
78 x 200 47.83
96 x 240 47.83
1 1/4 x 48 x 96 53.00
60 x 120 53.00
78 x 200 53.00
96 x 240 53.00
1 1/2 x 48 x 96 63.34
48 X 120 63.34
60 x 120 63.34
78 x 200 63.34
96 x 240 63.34
1 3/4 x 48 x 96 73.67
60 x 120 73.67
78 x 200 73.67
96 x 120 73.67
96 x 240 73.67
2 x 48 x 96 84.01
60 x 120 84.01
78 x 200 84.01
96 x 120 84.01
96 x 240 84.01
2 1/4 x 72 x 120 94.78
2 1/2 x 72 x 120 105.10
3 x 72 x 120 126.30
3 1/4 x 60 x 120 136.60
3 1/2 x 60 x 120 147.00
4 x 60 x 120 167.60
STAINLESS PLATEHot Rolled, Annealed & Pickled
304 304LASTM A 167/240 ASTM A 167/240
AMS 5513 AMS 5511
Pink - Color - Pink & Brown
THK Width LengthEst. lbs.
per sq. ft.
102
1/8 .125 x 48 x 120 6.15
3/16 .188 x 36 x 120 8.70
48 x 96 8.70
48 x 120 8.70
1/4 .250 x 48 x 96 11.25
48 x 144 11.25
3/8 .375 48 x 96 16.50
48 x 144 16.50
103
STAINLESS DIAMOND FLOOR PLATEAnnealed & Pickled
304ASTM A 793
Color: Pink
3/16 x 96 x 240 8.58
1/4 x 96 x 240 11.16
3/8 x 96 x 240 15.93
1/2 x 96 x 240 21.66
5/8 x 96 x 240 26.55
3/4 x 96 x 240 32.12
7/8 x 96 x 240 37.17
1 x 96 x 240 42.67
1 1/4 x 96 x 240 53.00
1 1/2 x 96 x 240 63.34
1 3/4 x 96 x 240 73.67
2 x 96 x 240 84.01
STAINLESS PLATEYARDE MELT
Improved Machining Characteristics � Better Chip Breakage
Extended Tool Life � More Parts Per Hour
304/304LYM 316/316LYMASTM A 240 ASTM A 240
ASME SA 240 ASME SA 240
Brown & White - Color - Blue & White
THK Width LengthEst. lbs.
per sq. ft.
THK Width LengthEst. lbs.
per sq. ft.
104
3/16 x 48 x 96 8.58
60 x 120 8.58
96 x 240 8.58
1/4 x 48 x 96 11.16
60 x 120 11.16
78 x 200 11.16
96 x 240 11.16
3/8 x 48 x 96 16.50
60 x 120 16.50
78 x 200 16.50
96 x 240 16.50
1/2 x 48 x 96 21.66
60 x 120 21.66
78 x 200 21.66
96 x 240 21.66
5/8 x 78 x 200 26.83
96 x 240 26.83
3/4 x 78 x 200 32.12
96 x 240 32.12
7/8 x 96 x 240 37.29
STAINLESS PLATEHot Rolled, Annealed & Pickled
316 316LASTM A 167/240 ASTM A 167/240
AMS 5524 AMS 5507
Purple - Color - Purple & Blue
THK Width LengthEst. lbs.
per sq. ft.
105
1 x 48 x 96 42.67
60 x 120 42.67
78 x 200 42.67
96 x 240 42.67
1 1/8 x 48 x 96 47.83
60 x 120 47.83
78 x 200 47.83
96 x 240 47.83
1 1/4 x 48 x 96 53.00
60 x 120 53.00
78 x 200 53.00
96 x 240 53.00
1 1/2 x 48 x 96 63.34
60 x 120 63.34
78 x 200 63.34
96 x 240 63.34
1 3/4 x 48 x 96 73.67
60 x 120 73.67
72 x 240 73.67
78 x 200 73.67
96 x 120 73.67
96 x 240 73.67
STAINLESS PLATEHot Rolled, Annealed & Pickled
316 316LASTM A 167/240 ASTM A 167/240
AMS 5524 AMS 5507
Purple - Color - Purple & Blue
THK Width LengthEst. lbs.
per sq. ft.
106
2 x 48 x 96 84.01
60 x 120 84.01
72 x 240 84.01
78 x 200 84.01
96 x 120 84.01
96 x 240 84.01
2 1/4 x 72 x 120 94.78
2 1/2 x 72 x 120 105.10
3 x 72 x 120 126.30
3 1/4 x 60 x 120 136.60
72 x 120 136.60
3 1/2 x 60 x 120 147.00
72 x 120 147.00
4 x 72 x 120 167.60
STAINLESS PLATEHot Rolled, Annealed & Pickled
316 316LASTM A 167/240 ASTM A 167/240
AMS 5524 AMS 5507
Purple - Color - Purple & Blue
THK Width LengthEst. lbs.
per sq. ft.
Consider Band Saw cut to size or Duplex Milled to finished widths.
107
3/16 x 72 x 240 8.58
96 x 240 8.58
1/4 x 72 x 240 11.16
96 x 240 11.16
3/8 x 72 x 240 16.50
96 x 240 16.50
1/2 x 96 x 240 21.66
5/8 x 96 x 240 26.83
3/4 x 96 x 240 32.12
1 x 96 x 240 42.67
1 1/4 x 72 x 240 53.00
1 1/2 x 72 x 240 63.34
1 3/4 x 72 x 240 73.67
2 x 72 x 240 84.01
STAINLESS PLATEHot Rolled, Annealed & Pickled
410 17-4ASTM A 240 ASTM A 693
AMS 5504 AMS 5604
Color: Silver
THK Width LengthEst. lbs.
per sq. ft.
108
CARBON STEEL GUIDE to
SHEET
Cold Roll Commercial Quality Maximum carbon
content .10. Soft enough to bend flat on itself in any
direction without cracking. Ductile enough for moderate
drawing applications. Light oil protects surface from
rust.
Hot Roll Commercial Quality Maximum carbon
content .10. A low cost steel sheet, soft enough to
bend on itself in any direction without cracking. Shallow
drawing and forming O.K., weldable. Surface has nor-
mal mill oxide.
To be used where surface finish is not crucial.
Hot Roll Pickled and Oiled Acid pickling removes mill
oxide, improving surface appearance and finishing
quality. Paint and enamel will adhere after cleaning.
Same properties and forming characteristics as com-
mercial quality.
Galvanized Zinc coating applied by either hot dipped or
electrolytic deposition. With this coating, sheets can be
formed without flaking.
Expanded Metal Expanded Metal may be used for
many industrial purposes such as open partitions, win-
dow guards, machine guards, and other manufacturing
and maintenance uses.
It is more rigid than an equal weight of solid plate or
wire mesh. In fabricating it may be cut to any desired
shape without loss of its original strength.
109
STEEL SHEETCold Rolled
Commercial QualityASTM A 366-CRCQ
Color: Blue
24 (.024) 36 x 96 1.000 24.00
36 x 120 1.000 30.00
48 x 96 1.000 32.00
48 x 120 1.000 40.00
22 (.030) 36 x 96 1.250 30.00
36 x 120 1.250 37.50
48 x 96 1.250 40.00
48 x 120 1.250 50.00
20 (.035) 36 x 96 1.500 36.00
36 x 120 1.500 45.00
48 x 96 1.500 48.00
48 x 120 1.500 60.00
18 (.048) 36 x 96 2.000 48.00
36 x 120 2.000 60.00
48 x 96 2.000 64.00
48 x 120 2.000 80.00
16 (.059) 36 x 96 2.500 60.00
36 x 120 2.500 75.00
48 x 96 2.500 80.00
48 x 120 2.500 100.0
Est. lbs. Est. lbs.Gage THK Width Length per sq. ft. per sheet
110
14 (.075) 36 x 96 3.125 75.00
36 x 120 3.125 93.75
48 x 96 3.125 100.0
48 x 120 3.125 125.0
13 (.090) 36 x 96 3.750 120.0
36 x 120 3.750 150.0
48 x 96 3.750 120.0
48 x 120 3.750 150.0
12 (.105) 36 x 96 4.380 105.0
36 x 120 4.380 131.3
48 x 96 4.380 140.0
48 x 120 4.380 175.0
60 x 120 4.380 218.8
11 (.120) 36 x 96 5.000 120.0
36 x 120 5.000 150.0
48 x 96 5.000 160.0
48 x 120 5.000 200.0
60 x 120 5.000 250.0
Est. lbs. Est. lbs.Gage THK Width Length per sq. ft. per sheet
STEEL SHEETCold Rolled
Commercial QualityASTM A 366-CRCQ
Color: Blue
111
14 (.075) 36 x 96 3.125 75.00
36 x 120 3.125 93.80
48 x 96 3.125 100.0
48 x 120 3.125 125.0
60 x 120 3.125 156.3
12 (.105) 36 x 120 4.380 131.3
48 x 96 4.380 140.0
48 x 120 4.380 175.0
60 x 120 4.380 218.8
11 (.120) 36 x 96 5.000 120.0
36 x 120 5.000 150.0
48 x 96 5.000 160.0
48 x 120 5.000 200.0
60 x 120 5.000 250.0
10 (.135) 36 x 96 5.630 135.0
36 x 120 5.630 168.8
48 x 96 5.630 180.0
48 x 120 5.630 225.0
60 x 120 5.630 281.3
7 (.179) 36 x 120 7.500 225.0
48 x 96 7.500 240.0
48 x 120 7.500 300.0
60 x 120 7.500 375.0
Est. lbs. Est. lbs.Gage THK Width Length per sq. ft. per sheet
STEEL SHEETHot Rolled, Pickled and Oiled
Commercial QualityASTM A 569-HRPO
Color: Gold
112
24 (.028) 36 x 96 1.156 27.74
36 x 120 1.156 34.68
48 x 96 1.156 36.90
48 x 120 1.156 46.20
22 (.034) 36 x 96 1.410 33.70
36 x 120 1.410 42.10
48 x 96 1.410 44.90
48 x 120 1.410 56.20
20 (.039) 36 x 96 1.656 39.70
36 x 120 1.656 49.60
48 x 96 1.656 52.90
48 x 120 1.656 66.20
18 (.051) 36 x 96 2.160 51.70
36 x 120 2.160 64.60
48 x 96 2.160 68.90
48 x 120 2.160 86.20
16 (.064) 36 x 96 2.656 63.70
36 x 120 2.656 79.60
48 x 96 2.656 84.90
48 x 120 2.656 106.2
Est. lbs. Est. lbs.Gage THK Width Length per sq. ft. per sheet
STEEL SHEETGalvanized
Lockforming QualityASTM A 527
113
14 (.079) 36 x 96 3.280 78.70
36 x 120 3.280 98.40
36 x 144 3.280 118.1
48 x 96 3.280 105.0
48 x 120 3.280 131.2
12 (.108) 36 x 96 4.530 108.7
36 x 120 4.530 135.9
48 x 120 4.530 181.2
48 x 144 4.530 217.5
11 (.123) 48 x 96 5.160 165.0
48 x 120 5.160 206.2
Est. lbs. Est. lbs.Gage THK Width Length per sq. ft. per sheet
STEEL SHEETGalvanized
Commercial QualityASTM A 526
114
1/4 x 20-22 Ga. 36,48 96 .8200 .110 x .715
1/4 x 18-20 Ga. 36,48 96 1.080 .118 x .715
1/ 2 x 20-22 Ga. 36,48 96 .4000 .375 x1.000
1/2 x 18-20 Ga. 36,48 96 .6600 .312 x 1.000
1/ 2 x 16-18 Ga. 36,48 96 .8200 .312 x1.000
1/2 x 13-15 Ga. 36,48 96 1.400 .265 x 1.000
3/4 x 16-18 Ga. 36,48 96 .5100 .750 x1.750
3/4 x 14-16 Ga. 36,48 96 .6300 .688 x1.813
3/4 x 13-15 Ga. 36,48 96 .7500 .688 x1.781
1 1/2 x 16-18 Ga. 36,48 96 .3800 1.062 x2.750
1 1/2 x 14-16 Ga. 48 96 .4600 1.062 x2.750
1 1/2 x 13-15 Ga. 36,48 96 .5700 1.062 x 2.750
*The first number represents the nominal width of diamond in inches measured from center
to center of bonds; the second number represents the approximate original gage before
expanding, and the third number represents the approximate gage thickness after flatten-
ing. Sheets of special size can be furnished.
EXPANDED METALFlattened
CARBON STEELApprox sizeof opening
Width Length Est. Lbs. in inchesStyle Designation* in inches in inches per sq. ft. SWO LWO
115
1/4 x 20 Ga. 48 96 .860 .140 x .718
1/4 x 18 Ga. 48 96 1.140 .145 x .718
1/2 x 20 Ga. 48 96 .430 .438 x .938
1/2 x 18 Ga. 48 96 .700 .438 x .938
1/2 x 16 Ga. 48 96 .860 .375 x .938
1/2 x 13 Ga. 48 96 1.470 .312 x .938
3/4 x 16 Ga. 48 96 .540 .813 x1.750
3/4 x 13 Ga 48 96 .800 .750 x1.688
3/4 x 10 (13 Ga.) 48 96 1.200 .750 x1.625
3/4 x 9 (10 Ga.) 48 96 1.800 .688 x1.562
1 1/2 x 16 Ga. 48 96 .400 1.250 x2.625
1 1/2 x 13 Ga. 48 96 .600 1.188 x2.500
1 1/2 x 10 Ga. 48 96 .790 1.188 x2.500
1 1/2 x 9 Ga. 48 96 1.200 1.125 x2.375
2 x 9 Ga. 48 96 .900 1.563 x3.375
Approx sizeof opening
Width Length Est. Lbs. in inchesStyle Designation* in inches in inches per sq. ft.
* The first number represents the nominal width of diamond in inches measured from
center to center of bonds, and the second number represents the approximate gage of
sheet or plate before expanding. Sheets of special size can be furnished.
SWO LWO
EXPANDED METALStandard, Not Flattened
CARBON STEEL
116
A-36 Carbon Steel Plate Excellent forming and welding
ability, also can be hardened within carbon limitations.
Typical applications - machinery components, plastic and
rubber molds, cams, bushings, fixtures, gears.
4140 Rolled Alloy Steel Plate Heat treatable to a
250/300 Brinell hardness with good machinability and
toughness. Typical applications - fixtures, machine parts,
adapters, molds, dies, tools.
4140 Prehard Alloy Steel Plate Mill heat treated to a 3
Brinell hardness 262/231, this usually eliminates the
need for heat treating by the customer. The machining
quality and toughness remains excellent. Typical appli-
cations - same as 4140 as rolled but more difficult to
machine due the prehard material state.
There are several additional material grades available
upon request, such as: 4340, Pressure Vessel, Abrasive
Resistance. Each of the grades has there own charac-
teristics and application due to the wide range of
elements.
CARBON & ALLOY GUIDE to
PLATE
117
STEEL PLATEMild Carbon Steel
ASTM A 36
1/4 x 96 x 240 10.21
5/16 x 48 x 120 12.76
48 x 144 12.76
96 x 240 12.76
3/8 x 48 x 120 15.32
48 x 144 15.32
60 x 144 15.32
96 x 240 15.32
1/2 x 48 x 120 20.42
48 x 144 20.42
60 x 144 20.42
96 x 240 20.42
5/8 x 48 x 120 25.53
60 x 144 25.53
96 x 240 25.53
3/4 x 48 x 96 30.63
48 x 120 30.63
96 x 240 30.63
7/8 x 48 x 120 35.74
60 x 144 35.74
96 x 240 35.74
THK Width LengthEst. lbs.
per sq. ft.
118
1 x 48 x 96 40.84
48 x 120 40.84
96 x 240 40.84
1 1/8 x 48 x 144 45.95
96 x 240 45.95
1 1/4 x 48 x 120 51.05
48 x 144 51.05
60 x 144 51.05
96 x 240 51.05
1 3/8 x 96 x 240 56.16
1 1/2 x 48 x 96 61.26
48 x 120 61.26
96 x 240 61.26
THK Width LengthEst. lbs.
per sq. ft.
STEEL PLATEMild Carbon Steel
ASTM A 36
119
1 5/8 x 96 x 240 66.36
2 x 48 x 120 81.68
48 x 144 81.68
96 x 144 81.68
2 1/4 x 48 x 144 91.89
96 x 120 91.89
2 1/2 x 48 x 120 102.1
48 x 144 102.1
60 x 144 102.1
96 x 120 102.1
3 x 60 x 144 122.5
96 x 120 122.5
3 1/2 x 60 x 144 142.9
4 x 60 x 144 163.4
4 1/2 x 48 x 144 183.4
5 x 48 x 120 204.2
5 1/2 x 48 x 96 224.6
6 x 48 x 96 245.0
THK Width Length Est. lbs.per sq. ft.
STEEL PLATEMild Carbon Steel
ASTM A 36
Flame Cut to your near finished dimensions.
120
1/2 x 96 x 240 20.42
5/8 x 96 x 240 25.53
3/4 x 96 x 240 30.63
7/8 x 96 x 240 35.74
1 x 48 x 120 40.84
84 x 240 40.84
1 1/2 x 48 x 144 61.26
1 3/4 x 60 x 144 71.47
2 x 60 x 144 81.68
96 x 120 81.68
2 1/2 x 96 x 120 102.1
3 x 96 x 120 122.5
ALLOY STEEL PLATEAs Rolled
4140
THK Width LengthEst. lbs.
per sq. ft.
3/4 x 48 x 144 30.63
96 x 240 30.63
1 x 48 x 144 40.84
60 x 144 40.84
72 X 240 40.84
1 1/4 x 48 x 144 51.05
1 1/2 x 48 x 144 61.26
1 3/4 x 60 x 144 71.47
2 x 96 x 120 81.68
2 1/4 x 48 x 144 91.89
2 1/2 x 96 x 120 102.1
3 x 60 x 144 122.5
3 1/2 x 96 x 120 142.9
4 x 72 x 144 163.4
96 x 240 163.4
4 1/2 x 72 x 144 183.8
96 x 120 183.8
5 x 60 x 120 204.2
96 x 120 204.2
THK Width Length Est. lbs.per sq. ft.
ALLOY STEEL PLATEPre-Hardened Brinell Hardness 262/321
4140
121
122
COPPERMETAL GUIDEto
SHEET and PLATE
Copper Sheet and Plate - Alloy 110 - Cold Rolled
ETP - Commercially pure per ASTM B 152 -
Electrolytic Tough Pitch Copper (ETP) - 110 alloy is the
most widely used of the coppers because of its
combination of electrical and thermal conductivity, corro-
sion resistance, and workability as well as its aesthetic
beauty.
Yellow Brass Sheet and Plate - Alloy 260 Cold Rolled
70/30 Composition per ASTM B 36 Alloy 6 (Cartridge
Brass), with a nominal composition of 70% copper and
30% zinc is the most widely used copper alloy because
of its combination of outstanding characteristics. The
name originated from its use as the standard alloy for
artillery shell and small-arms cartridge cases. Today,
the alloy is widely used for clips, contacts, brackets in
electrical wiring devices, especially for residential and
commercial construction, and is often times fabricated
with hot dip tin coatings.
123
.020 x 36 x 96 1.002 23.44
.025 x 36 x 96 1.252 30.14
.032 x 36 x 96 1.498 35.72
.040 x 36 x 96 1.999 44.65
.050 x 36 x 96 2.374 55.81
.063 x 36 x 96 3.000 70.33
.093 x 36 x 96 4.330 103.80
.125 x 36 x 96 5.796 139.50
.1875 x 36 x 96 8.694 209.30
*.250 x 36 x 96 11.59 279.00
*.375 x 36 x 96 17.39 418.60
*.500 x 36 x 96 23.18 558.10
*.750 x 36 x 96 34.78 837.20
*1.00 x 36 x 96 46.37 1116.00
*1.25 x 36 x 96 57.96 1395.00
*1.50 x 36 x 96 69.55 1674.00
*2.00 x 36 x 96 115.9 2232.00
*3.00 x 36 x 96 139.1 3349.00
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet/plate
COPPER SHEET AND PLATECold Rolled
ALLOY 110Electrolytic Tough Pitch
Half Hard
ASTM B 152
* Plate: 1/4 Hard
Plate .750 and heavier: hot rolled finish
124
.020 x 36 x 96 .8915 21.40
.025 x 36 x 96 1.122 29.63
.032 x 36 x 96 1.419 34.06
.040 x 36 x 96 1.787 42.90
.050 x 36 x 96 2.253 54.07
.063 x 36 x 96 2.772 67.10
.080 x 36 x 96 3.584 86.00
.093 x 36 x 96 4.023 98.70
.102 x 36 x 96 4.520 108.40
.125 x 36 x 96 5.544 133.00
.187 x 36 x 96 8.316 199.50
.250 x 36 x 96 11.09 266.10
.375 x 36 x 96 16.63 399.10
.500 x 36 x 96 22.18 532.30
.750 x 36 x 96 33.26 798.20
1.00 x 36 x 96 44.35 1064.00
1.25 x 36 x 96 55.44 1331.00
1.50 x 36 x 96 66.53 1597.00
2.00 x 36 x 96 88.70 2129.00
BRASS SHEET AND PLATECold Rolled
ALLOY 260Half Hard
ASTM B 36
Est. lbs. Est. lbs.THK Width Length per sq. ft. per sheet/plate
YARDE METALS
ROD & BAR
ROD & BARAluminum
Rod & Bar Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . .125 - 126
Machinability Comparison . . . . . . . . . . . . . . . . . . . . . . . . .127
Rounds: 2011, 2024, 5086, 6020, 6061, 6262, 7075 . . . . . . . . . . . . . . . . . . . .128 - 153
Hexagons: 2011, 2024, 6061, 7075 . . . . . . . . . .154 - 157Squares: 2011, 2024, 5086, 6061, 7075 . . . . .158 - 164Rectangles: 2024, 6061, 6063, 7075 . . . . . . . . . .165 - 189
StainlessAustenitic 300 Rod & Bar Guide . . . . . . .190 - 192Martensitic & Ferritic 400 Rod & Bar Guide . . . . . . .193 - 194Precipitation Hardening Rod & Bar Guide . . . . . . . . . . .195
Machinability Comparison . . . . . . . . . . . . . . . . . . . . . . . . .196
Machining Speeds & Feeds . . . . . . . . . . . . . . . . . . .197 - 200
Rounds: 303, 304, 316, 321, 347, 410, 416, 420, 430, 440C, 17-4, 15-5 . . . . . . . .201 - 242
Hexagons: 303, 304, 316, 416, 17-4 . . . . . . . . . 243 - 250Squares: 303, 304, 416 . . . . . . . . . . . . . . . . . . 251 - 253Flats: 303, 304, 316, 17-4 . . . . . . . . . . . . . 254 - 276
CarbonRod & Bar Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . 277 - 278
Machinability Comparison . . . . . . . . . . . . . . . . . . . . . . . . . 279
Rounds: CF 1018,11L17,12L14, 1215, 1045 . . 280 - 293Hexagons: CF 1018,12L14, 1215 . . . . . . . . . . . 294 - 297Squares: CF 1018,12L14 . . . . . . . . . . . . . . . . 298 - 299Flats: CF 1018, Flat Ground Stock & 0-1 . . 300 - 322
Copper MetalRod & Bar Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . 323 - 324
Rounds: 110 . . . . . . . . . . . . . . . . . . . . . . . . . . 325 - 326145, 314 . . . . . . . . . . . . . . . . . . . . . . 334 - 336
Squares: 110 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327Rectangles: 110 . . . . . . . . . . . . . . . . . . . . . . . . . . 328 - 333
BrassRounds: 360 . . . . . . . . . . . . . . . . . . . . . . . . . 337 - 340
464, 544, 642 . . . . . . . . . . . . . . . . . . 351 - 354Hexagons: 360 . . . . . . . . . . . . . . . . . . . . . . . . . . 341 - 342Squares: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .360343 - 344Rectangles: 360 . . . . . . . . . . . . . . . . . . . . . . . . . . 345 - 350
Bearing Bronze: 932 solid & hollow . . . . . . . . . . . . .355 - 356
Pages
RO
D &
BA
R
ALUMINUM GUIDEto
ROD and BAR
2011 This is the most widely used alloy for all types ofscrew machine parts and compares favorably with freecutting brass. This is the most suitable alloy for machiningautomatic screw machines and CNC equipment. Can bemachined at high speeds and comparatively heavy feeds.Mechanical properties and hardness are excellent, corro-sion resistance good.
2014 One of the strongest of heat-treatable alloys, usedin heavy duty applications. Workability fair. Machinabilityis good to excellent. Weldability is good with arc andresistance methods. Corrosion resistance is only fair.
2017 Like 2011, this is also a general purpose alloy forautomatic screw machine work. It is stronger than 2011,but harder to machine and does not have the fine chipassociated with 2011. Corrosion resistance is fair.
2024 Known as the “aircraft alloy” in machining rod. Canbe machined to a high finish. Corrosion resistance is onlyfair. 2024 is also the basic alloy for cold finished rectangu-lar bar, where strength and machinability are essential forprecision fittings and parts.
4032 Excellent machinability and drilling characteristicswhen using single-point or multi-spindle screw machines.Superior wear resistance, eliminates the need for hardcoat anodizing. High strength, low co-efficient of thermalexpansion.
5086 Excellent corrosion resistance and good weldability.Commonly used to manufacture unfired, welded pressurevessels, marine, auto aircraft cryogenics, drilling rigs,tanks, TV towers, transportation equipment and missilecomponents.
125
126
ALUMINUM GUIDEto
ROD and BAR6013 High strength and good corrosion resistance.Easily joined by all welding and brazing methods.Excellent compressive properties.
6020 Excellent machinability, high corrosion resistance,good joining characteristics and excellent response toanodizing. The T8 temper offers excellent residual stresscontrol for applications requiring tight dimensional controlafter machining.
6061 Generally selected where welding or brazing is required, or for its particularly high corrosion resistancein all tempers. Machining is fair in harder tempers. Corrosion resistance and appearance after anodizing are highest of screw machine alloys.
6063 Extruded. Highly corrosion resistant, with goodformability. Readily welded, and is the most suitable for anodizing. Used for architectural and ornamental application.
6262 Has excellent machinability, is readily welded, andhas good corrosion resistance. Bright, smooth machine finish is easy to obtain.
7075 One of the strongest and hardest alloys soldcommercially. The superior stress corrosion resistance ofthe T73 and T7351 tempers of 7075 cold finished rod havemade them a logical replacement for alloys 2014, 2017and 2024 in many of the most critical applications. Machin-ability is good, resistance welding satisfactory, finishingcharacteristics excellent, corrosion resistance fair.
127
2011 - T3 A++ 45,000 38,000 10
2024 - T351 B 62,000 45,000 10
2024 - T3511 B 70.000 52,000 10
2024 - T4 B 62,000 45,000 10
4032 - T651 B 54,000 51,000 7
5086 - H111 C 36,000 21,000 12
6013 - T651 B 55,000 52,000 5
6020 - T8 A 42,000 39,000 12
6061 - T6 C 42,000 35,000 10
6061 - T651 C 42,000 35,000 10
6061 - T6511 C 38,000 35,000 10
6063 - T52 C 22,000 16,000 8
6262-T6511 B+ 42,000 35,000 10
6262 - T9 B 52,000 48,000 5
7075 - T6 B 77,000 66,000 7
7075-T651 B 77,000 66,000 7
7075 - T6511 B 78,000 68,000 6
7075-T7351 B 68,000 56,000 10
7075-T73511 B 68,000 57,000 7
GRADE MACHINABILITY TENSILE YIELD ELONGRATING MIN MIN %
ALUMINUMMACHINABILITY COMPARISON
NOTE: Mechanical properties, wire rod and bar from Aluminum Association hand book.
128
1/8 .1250 .0151 .180
9/64 .1406 .0180 .223
5/32 .1562 .0236 .282
3/16 .1875 .0339 .406
7/32 .2187 .0461 .552
1/4 .2500 .0602 .721
17/64 .2656 .0700 .841
9/32 .2812 .0762 .913
19/64 .2969 .0830 .997
5/16 .3125 .0941 1.127
11/32 .3437 .1091 1.309
.3445 .1110 1.343
.3450 .1120 1.344
23/64 .3594 .1220 1.462
3/8 .3750 .1355 1.622
25/64 .3906 .1500 1.800
.4005 .1510 1.815
.4010 .1485 1.782
13/32 .4062 .1590 1.904
7/16 .4375 .1844 2.208
15/32 .4688 .2118 2.536
1/2 .5000 .2409 2.884
.5220 .2660 3.190
17/32 .5313 .2719 3.257
9/16 .5625 .3049 3.650
.5835 .3320 3.984
19/32 .5937 .3398 4.068
5/8 .6250 .3764 4.506
.6410 .3940 4.728
21/32 .6562 .4140 4.968
11/16 .6875 .4556 5.453
.0703 .4660 5.592
ALUMINUM ROUNDSCold Finish
2011-TT3AMS QQ A 225/3 ASTM B 211
Color: Brown
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
Non-Standard sizes.
129
23/32 .7187 .4950 5.940
3/4 .7500 .5421 6.488
25/32 .7812 .5850 7.020
13/16 .8125 .6099 7.318
.8235 .6420 7.704
.8250 .6420 7.704
7/8 .8750 .7378 8.832
15/16 .9375 .8470 10.140
.9540 .8590 10.308
1 1.0000 .9640 11.540
1 1/16 1.0625 1.0880 13.020
1 1/8 1.1250 1.2200 14.600
1 3/16 1.1875 1.4750 16.270
1 1/4 1.2500 1.5060 18.020
1 5/16 1.3125 1.6600 19.870
1 3/8 1.3750 1.8210 21.820
1 7/16 1.4375 2.0000 24.000
1 1/2 1.5000 2.1680 25.960
1 9/16 1.5625 2.3520 28.160
1 5/8 1.6250 2.5440 30.460
1 11/16 1.6875 2.7300 32.760
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
ALUMINUM ROUNDSCold Finish
2011-T3AMS QQ A 225/3 ASTM B 211
Color: Brown
Non-Standard sizes.
Consistent, High Quality metal lowers yourset up time and increases production.
ALUMINUM ROUNDSCold Finish
2011-T3AMS QQ A 225/3 ASTM B 211
Color: Brown
1 3/4 1.7500 2.951 35.33
1 13/16 1.8125 3.166 37.90
1 7/8 1.8750 3.388 40.56
1 15/16 1.9375 3.655 43.86
2 2.0000 3.854 46.14
2 1/16 2.0625 4.030 48.36
2 1/8 2.1250 4.340 52.08
2 3/16 2.1875 4.512 54.14
2 1/4 2.2500 4.879 58.40
2 5/16 2.3125 5.100 61.20
2 3/8 2.3750 5.415 64.98
2 7/16 2.4375 5.602 67.23
2 1/2 2.5000 6.022 72.10
2 9/16 2.5625 6.193 74.31
2 5/8 2.6250 6.498 77.98
2 3/4 2.7500 7.260 87.12
2 7/8 2.8750 7.794 93.53
3 3.0000 8.650 103.80
3 1/16 3.0625 8.844 106.10
3 1/8 3.1250 9.208 110.50
3 1/4 3.2500 10.150 121.80
3 3/8 3.3750 10.740 128.90
3 1/2 3.5000 11.310 135.70
4 4.0000 15.090 181.10
130
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
1/8 .1250 .0150 .180
5/32 .1562 .0220 .260
3/16 .1875 .0340 .400
7/32 .2187 .0460 .560
1/4 .2500 .0600 .710
9/32 .2813 .0750 .900
.2830 .0740 .880
5/16 .3125 .0930 1.120
11/32 .3437 .1130 1.360
3/8 .3750 .1340 1.610
13/32 .4062 .1560 1.872
7/16 .4375 .1820 2.190
* *1/2 .5000 .2380 2.860
* * 9/16 .5625 .3010 3.610
* *5/8 .6250 .3720 4.460
* *11/16 .6875 .4500 5.400
3/4 .7500 .5350 6.430
13/16 .8125 .6280 7.540
7/8 .8750 .7290 8.750
15/16 .9375 .8370 10.040
ALUMINUM ROUNDSCold Finish
2011-T451AMS QQ A 225/3 ASTM B 211
Color: BrownSize in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
6 1/2 6.5000 39.840 479
8 8.0000 60.350 726
131
ALUMINUM ROUNDSCold Finish
2024-T4 2024-T351 AMS QQ A 225/6 ASTM B 211 AMS 4120
Color: RedSize in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
T4 Temper under 1/2” dia.* * Stocked in both T4 and T351 Temper.
Non-Standard sizes.
132
1 1.0000 .950 11.42
1 1/16 1.0630 1.075 12.90
1 1/8 1.1250 1.205 14.46
1 3/16 1.1875 1.301 15.61
1 1/4 1.2500 1.487 17.84
1 5/16 1.3125 1.640 19.68
1 3/8 1.3750 1.800 21.60
1 7/16 1.4375 1.967 23.60
1 1/2 1.5000 2.142 25.70
1 9/16 1.5625 2.324 27.89
1 5/8 1.6250 2.514 30.17
1 11/16 1.6875 2.685 32.22
1 3/4 1.7500 2.915 34.98
1 13/16 1.8125 3.033 36.39
1 7/8 1.8750 3.347 40.16
2 2.0000 3.808 45.69
2 1/16 2.0625 4.040 48.48
2 1/8 2.1250 4.298 51.57
2 3/16 2.1875 4.512 54.14
2 1/4 2.2500 4.819 57.82
2 3/8 2.3750 5.369 64.42
2 7/16 2.4375 5.710 68.52
2 1/2 2.5000 5.949 71.38
2 5/8 2.6250 6.559 78.70
2 3/4 2.7500 7.199 86.38
2 7/8 2.8750 7.868 94.41
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
ALUMINUM ROUNDSCold Finish
2024-T351AMS QQ A 225/6 ASTM B 211 AMS 4120
Color: Red
133
ALUMINUM ROUNDSCold Finish
2024-T351AMS QQ A 225/6 ASTM B 211 AMS 4120
Color: Red
3 3.000 8.57 102.8
3 1/16 3.063 8.84 106.1
3 1/8 3.125 9.30 111.6
3 1/4 3.250 10.05 120.6
3 3/8 3.375 10.84 130.0
3 1/2 3.500 11.66 139.9
3 5/8 3.625 12.39 148.7
3 3/4 3.750 13.39 160.6
4 4.000 15.23 182.7
4 1/8 4.125 16.05 192.6
4 1/4 4.250 17.19 206.2
4 1/2 4.500 19.28 231.3
4 3/4 4.750 21.48 257.7
5 5.000 23.80 285.6
5 1/8 5.125 24.77 297.2
5 1/4 5.250 26.24 314.8
5 1/2 5.500 28.80 345.6
5 3/4 5.750 31.18 374.1
6 6.000 34.27 411.2
6 1/4 6.25 36.84 442.1
6 1/2 6.500 40.22 482.6
* 7 7.000 46.64 559.6
* 7 1/4 7.250 49.56 594.8
* 7 1/2 7.500 53.54 642.4
* 8 8.000 60.92 731.0
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
* T4 temper.
134
ALUMINUM ROUNDSCold Finish
2024-T851AMS QQ A 225/6 ASTM B 211
1/2 .500 .230 2.82
5/8 .625 .368 4.42
3/4 .750 .530 6.37
7/8 .875 .722 8.66
1 1.000 .943 11.31
1 1/8 1.125 1.195 14.33
1 1/4 1.250 1.473 17.68
1 3/8 1.375 1.783 21.40
1 1/2 1.500 2.122 25.46
1 5/8 1.625 2.490 29.88
1 3/4 1.750 2.888 34.66
2 2.000 3.772 45.26
2 1/8 2.125 4.258 51.09
2 1/2 2.500 5.894 70.73
3 3.000 4.487 101.80
3 1/2 3.500 11.550 138.62
3 3/4 3.750 13.260 159.13
4 4.000 15.088 181.05
4 1/2 4.500 19.090 229.15
4 3/4 4.750 21.280 255.32
5 5.000 23.580 282.90
5 3/4 5.750 31.180 374.13
6 6.000 33.950 407.38
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
135
ALUMINUM ROUNDSExtruded
2024-T3511ASTM B 221Color: Red
1/2 .500 .236 2.83
3/4 .750 .530 6.36
1 1.000 .943 11.32
1 1/8 1.125 1.193 14.32
1 1/4 1.250 1.473 17.68
1 1/2 1.500 2.121 25.46
1 3/4 1.750 2.888 34.66
2 2.000 3.760 45.12
2 1/2 2.500 5.880 70.56
3 3.000 8.320 99.80
3 1/4 3.250 9.960 119.50
3 5/8 3.625 12.390 148.70
3 1/2 3.500 11.320 135.80
4 4.000 14.780 177.40
4 1/8 4.125 15.580 186.90
4 1/2 4.500 18.710 224.50
4 3/4 4.750 20.840 250.00
5 5.000 23.100 277.20
5 1/8 5.125 24.000 288.00
5 1/4 5.25 25.990 311.90
5 1/2 5.500 27.950 335.40
6 6.000 33.260 399.10
6 1/8 6.125 35.000 420.00
6 1/2 6.500 39.040 468.50
7 7.000 45.280 543.40
7 1/2 7.500 53.040 636.50
8 8.000 59.140 709.70
8 1/4 8.250 64.180 770.20
8 1/2 8.500 69.360 832.30
9 9.000 76.380 916.60
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
136
8 1/4 8.25 64.18
10 10.00 92.40
11 11.00 114.10
12 12.00 133.10
13 13.00 159.40
14 14.00 185.00
15 15.00 207.90
16 16.00 241.41
ALUMINUM ROUNDS*Extruded Yarde Bar
2024-T3ASTM B 221 ASTM B 594
Color: RedSize in Decimal Lbs.Inches Size per ft.
* Yarde Bar: Offers substantial cost savings over saw cut plate when sliced to length. Contact your sales representative for a cost comparison.
Saw cut large diameter circles from Yarde Bar in one easy step.
137
ALUMINUM ROUNDS
5086-H111AMS QQA 200/50 ASTM B 221
Color: Teal Blue
3/4 .750 .530 6.37
1 1.000 .943 11.32
1 1/4 1.250 1.473 17.68
1 1/2 1.500 2.122 25.46
1 3/4 1.750 2.888 34.66
2 2.000 3.772 45.26
2 1/2 2.500 5.894 70.73
3 3.000 8.487 101.84
3 1/4 3.250 9.960 119.53
3 1/2 3.500 11.550 138.62
4 4.000 15.090 181.06
4 1/2 4.500 19.100 229.15
6 6.000 33.950 407.37
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
138
ALUMINUM ROUNDS6020-T8Color: Yellow
1/4 .250 .059 .708
5/16 .313 .092 1.105
3/8 .375 .133 1.591
7/16 .437 .180 2.165
1/2 .500 .235 2.829
5/8 .625 .368 4.420
11/16 .688 .446 5.352
3/4 .750 .531 6.372
7/8 .875 .722 8.664
57/64 .890 .747 8.964
15/16 .938 .829 9.948
1 1.000 .943 11.320
1 3/8 1.375 1.783 21.400
1 1/2 1.500 2.122 25.460
1 3/4 1.750 2.888 34.660
2 2.000 3.772 45.260
2 1/4 2.250 4.774 57.290
2 1/2 2.500 5.894 70.730
2 3/4 2.750 7.132 85.580
3 3.000 8.487 101.840
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
ALUMINUM ROUNDS6061-T6 HS
Handle Stock
QQ A 225/8 ASTM B 211 AMS 4117Color: Blue
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
1/8 .125 .015 .018
3/16 .187 .034 .408
7/32 .218 .044 .528
1/4 .250 .060 .720
5/16 .312 .094 1.128
3/8 .375 .130 1.560
7/16 .437 .184 2.208
1/2 .500 .250 3.000
139
1/8 .1250 .0144 .173
5/32 .1562 .0220 .264
3/16 .1875 .0325 .390
7/32 .2187 .0439 .527
*1/4 .2500 .0577 .693
5/16 .3125 .0902 1.082
11/32 .3437 .1087 1.304
*3/8 .3750 .1299 1.558
13/32 .4062 .1590 1.910
7/16 .4375 .1768 2.121
* **1/2 .5000 .2309 2.770
**9/16 .5625 .2922 3.506
**5/8 .6250 .3608 4.329
.6562 .4060 4.872
**11/16 .6875 .4365 5.238
.7187 .4870 5.845
*3/4 .7500 .5195 6.234
13/16 .8125 .6097 7.316
7/8 .8750 .7071 8.485
15/16 .9375 .8118 9.741
*1 1.0000 .9240 11.080
1 1/16 1.0625 1.0430 12.510
1 1/8 1.1250 1.1690 14.020
1 3/16 1.1875 1.3020 15.620
1 1/4 1.2500 1.4430 17.310
1 5/16 1.3125 1.5910 19.090
1 3/8 1.3750 1.7460 20.950
1 7/16 1.4380 2.0000 24.000
1 1/2 1.5000 2.0780 24.930
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
ALUMINUM ROUNDSCold Finish
6061-T6 6061-T651 AMS QQ A 225/8 ASTM B 211 AMS 4117
Color: Blue
T6 Temper under 1/2” dia* Stocked in 6063-T52** Stocked in both T6 and T651 Non-Standard sizes
140
1 9/16 1.563 2.255 27.06
1 5/8 1.625 2.439 29.26
1 11/16 1.688 2.685 32.22
1 3/4 1.750 2.829 33.94
1 7/8 1.875 3.247 38.96
2 2.000 3.694 44.32
2 1/8 2.125 4.172 50.06
2 1/4 2.250 4.676 56.11
2 3/8 2.375 5.210 62.52
2 1/2 2.500 5.773 69.27
2 5/8 2.625 6.364 76.36
2 3/4 2.750 6.985 83.82
2 7/8 2.875 7.637 91.64
3 3.000 8.310 99.70
3 1/8 3.125 9.020 108.20
3 1/4 3.250 9.760 117.10
3 1/2 3.500 11.310 135.70
3 3/4 3.750 12.990 155.80
4 4.000 14.780 177.30
4 1/4 4.250 16.670 200.10
4 1/2 4.500 18.700 224.40
4 3/4 4.750 20.820 249.80
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
ALUMINUM ROUNDSCold Finish
6061-T651 AMS QQ A 225/8 ASTM B 211 AMS 4117
Color: Blue
141
5 5.00 23.09 277.0
5 1/4 5.25 25.46 305.5
5 1/2 5.50 28.00 336.0
6 6.00 33.25 399.0
6 1/4 6.25 36.04 432.5
6 1/2 6.50 39.02 468.2
6 3/4 6.75 43.74 524.9
7 7.00 45.25 543.0
7 1/2 7.50 51.90 622.8
8 8.00 59.11 709.3
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
ALUMINUM ROUNDSCold Finish
6061-T651 AMS QQ A 225/8 ASTM B 211 AMS 4117
Color: Blue
For larger extruded sizes see page 145.
142
1/4 .2500 .0577 .069
3/8 .3750 .1299 1.558
7/16 .4375 .1800 2.160
1/2 .5000 .2310 2.772
9/16 .5625 .2918 3.502
5/8 .6250 .3608 4.329
11/16 .6875 .4450 5.340
3/4 .7500 .5195 6.234
13/16 .8125 .6110 7.332
7/8 .8750 .7071 8.485
15/16 .9375 .8118 9.742
1 1.0000 .9240 11.080
1 1/16 1.0625 1.0650 12.780
1 1/8 1.1250 1.1690 14.030
1 3/16 1.1875 1.3020 15.620
1 1/4 1.2500 1.4430 17.320
1 5/16 1.3125 1.5910 19.090
1 3/8 1.3750 1.7460 20.950
1 7/16 1.4375 1.9100 22.920
1 1/2 1.5000 2.0780 24.940
1 9/16 1.5625 2.2550 27.060
1 5/8 1.6250 2.4390 29.270
1 11/16 1.6875 2.6300 31.560
1 3/4 1.7500 2.8290 33.950
1.7550 2.9050 34.860
1 7/8 1.8750 3.2470 38.960
ALUMINUM ROUNDSExtruded
6061-T6511AMS QQ A 200/8 ASTM B 221
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
Non-Standard sizes
143
ALUMINUM ROUNDSExtruded
6061-T6511AMS QQ A 200/8 ASTM B 221
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
2 2.000 3.694 44.33
2 1/16 2.063 4.818 57.82
2 1/8 2.125 4.171 50.05
2 1/4 2.250 4.678 56.13
2 3/8 2.375 5.210 62.52
2 1/2 2.500 5.773 69.27
2 5/8 2.625 6.364 76.36
2 3/4 2.750 6.985 83.82
2 7/8 2.875 7.637 91.64
3 3.000 8.310 99.70
3 1/8 3.125 9.020 108.30
3 1/4 3.250 9.760 117.00
3 3/8 3.375 10.520 126.20
3 1/2 3.500 11.310 135.70
3 5/8 3.625 12.140 145.70
3 3/4 3.750 12.990 155.80
3 7/8 3.875 13.870 166.40
4 4.000 14.780 177.30
4 1/8 4.125 15.780 189.40
4 1/4 4.250 16.680 200.10
4 3/8 4.375 18.050 216.60
4 1/2 4.500 18.700 224.40
4 5/8 4.625 19.760 237.10
4 3/4 4.750 20.840 250.00
5 5.000 23.090 277.00
5 1/16 5.063 24.600 295.20
5 1/4 5.250 25.460 305.50
5 1/2 5.500 27.940 335.20
5 3/4 5.750 30.540 366.40
144
ALUMINUM ROUNDSExtruded
6061-T6511AMS QQ A 200/8 ASTM B 221
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
6 6.000 33.25 399
6 1/8 6.125 34.66 416
6 1/4 6.250 36.08 433
6 1/2 6.500 39.02 469
6 3/4 6.750 42.10 506
7 7.000 45.26 544
7 1/4 7.250 49.57 595
7 1/2 7.500 51.98 624
7 3/4 7.750 56.64 680
8 8.000 59.11 710
8 1/8 8.125 60.95 732
8 1/4 8.250 62.86 755
8 1/2 8.500 67.00 804
9 9.000 75.00 900
9 1/4 9.250 80.69 968
9 1/2 9.500 85.11 1021
10 10.000 92.00 1104
10 1/8 10.125 96.67 1160
10 1/4 10.250 99.07 1189
10 1/2 10.500 103.90 1248
11 11.000 114.00 1368
11 1/8 11.125 116.70 1401
11 1/4 11.250 119.30 1432
11 1/2 11.500 124.70 1497
11 3/4 11.750 130.20 1562
12 12.000 135.80 1630
145
11 1/811 1/411 1/2
1212 1/812 1/412 1/2
1313 1/2
1414 1/2
1515 1/2
1616 1/816 1/416 1/2
1717 1/8
*17 1/2
1818 1/418 1/2
1919 1/2
2020 1/2
2121 1/2
2222 1/2
2323 1/2
2424 1/2
2525 1/2
26
11.12511.25011.500
12.00012.12512.25012.500
13.00013.500
14.00014.500
15.00015.500
16.00016.12516.25016.500
17.00017.12517.500
18.00018.25018.500
19.00019.500
20.00020.500
21.00021.500
22.00022.500
23.00023.500
24.00024.500
25.00025.500
26.000
116.00119.35120.00
133.00135.80141.51150.00
156.00171.00
181.10198.00
207.90228.00
236.50245.19249.00256.70
272.50276.55288.80
305.50314.08322.74
340.40360.40
377.20398.40
415.86438.75
456.41479.80
498.84512.56
543.20567.40
589.38612.50
637.47
ALUMINUM ROUNDS*Extruded Yarde Bar
6061-T6*AMS QQ A 200/8 ASTM B 221
Color: Blue
Size inInches
Decimal Size
Lbs.per ft.
* Except mechanicals and markings on sizes 17 1/2 and above.
146
.2812 .0740 .538
5/16 .3125 .0920 1.104
.3445 .1110 1.342
.3450 .1099 1.319
3/8 .3750 .1350 1.620
.4005 .1510 1.815
.4010 .1485 1.782
7/16 .4375 .1805 2.166
1/2 .500 .2357 2.829
9/16 .5625 .3040 3.648
.5835 .3145 3.774
5/8 .6250 .3620 4.344
.6410 .3720 4.464
11/16 .6875 .4460 5.352
.7030 .4880 5.856
3/4 .7500 .5300 6.360
.7675 .5442 6.530
13/16 .8125 .6330 7.596
.8235 .6880 8.256
7/8 .8750 .7220 8.664
.8920 .7240 8.688
ALUMINUM ROUNDSCold Finish
6262-T9AMS QQ A 225/10 ASTM B 211
Color: Orange Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
Non-Standard sizes.
147
1 1.0000 .960 11.52
1 1/16 1.0625 1.080 12.96
1 1/8 1.1250 1.220 14.64
1 3/16 1.1875 1.350 16.20
1 1/4 1.2500 1.490 17.88
1 5/16 1.3125 1.625 19.49
1 3/8 1.375 1.783 21.40
1 7/16 1.4375 1.949 23.39
1 1/2 1.5000 2.160 25.92
1 5/16 1.3125 1.625 19.49
1 3/8 1.3750 1.783 21.40
1 5/8 1.625 2.490 29.88
1 3/4 1.750 2.888 34.66
2 2.000 3.772 46.26
2 1/4 2.250 4.774 57.29
2 1/2 2.500 5.894 70.73
2 3/4 2.750 7.131 85.58
3 3.000 8.487 101.80
ALUMINUM ROUNDSCold Finish
6262-T9AMS QQ A 225/10 ASTM B 211
Color: OrangeSize in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
Non-Standard sizes.
148
ALUMINUM ROUNDSCold Finish
7075-T6 7075-T651AMS QQ A 225/9 ASTM B 211 AMS 4123
Color: Black
1/4 .2500 .0595 .714
5/16 .3125 .0930 1.116
3/8 .3750 .1339 1.606
7/16 .4375 .1840 2.208
* 1/2 .5000 .2380 2.856
* 5/8 .6250 .3720 4.464
3/4 .7500 .5354 6.424
13/16 .8125 .6225 7.471
7/8 .8750 .7288 8.745
15/16 .9375 .8288 9.946
1 1.0000 .952 11.420
1 1/16 1.0625 1.043 12.520
1 1/8 1.1250 1.205 14.460
1 3/16 1.1875 1.372 16.460
1 1/4 1.2500 1.487 17.730
1 5/16 1.3125 1.624 19.490
1 3/8 1.3750 1.799 21.580
1 1/2 1.5000 2.141 25.690
1 9/16 1.5625 2.303 27.640
1 5/8 1.6250 2.514 30.160
1 11/16 1.6875 2.685 32.220
1 3/4 1.7500 2.915 34.980
1 7/8 1.8750 3.347 40.160
2 2.0000 3.808 45.690
2 1/8 2.1250 4.330 51.960
2 1/4 2.2500 4.819 57.820
2 3/8 2.3750 5.400 64.800
2 1/2 2.5000 5.949 71.380
2 5/8 2.6250 6.370 76.440
2 3/4 2.7500 6.988 83.850
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
T6 Temper under 1/2” dia* Stocked in both T6 and T651
149
ALUMINUM ROUNDSCold Finish
7075-T651AMS QQ A 225/9 ASTM B 211 AMS 4123
Color: Black
3 3.00 8.57 102.8
3 1/8 3.13 9.21 110.5
3 1/4 3.25 10.05 120.6
3 3/8 3.38 10.74 128.9
3 7/16 3.44 11.14 133.7
3 1/2 3.50 11.66 139.9
3 5/8 3.63 12.39 148.7
3 3/4 3.75 13.39 160.6
4 4.00 15.23 182.7
4 1/4 4.25 17.03 204.4
4 1/2 4.50 18.71 224.5
4 3/4 4.75 20.84 250.0
5 5.00 23.10 277.2
5 1/4 5.25 25.99 311.8
5 1/2 5.50 27.95 335.4
5 3/4 5.75 30.55 366.6
6 6.00 33.26 399.1
6 1/4 6.25 36.84 442.0
6 1/2 6.50 39.04 468.5
7 7.00 46.21 554.5
7 1/2 7.50 53.04 636.5
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
* T6 Temper
ALUMINUM ROUNDSExtruded
7075-T6511ASTM B 221Color: Black
9/16 .56 .299 3.58
5/8 .63 .369 4.42
3/4 .75 .530 6.37
1 1.00 .950 11.42
1 1/8 1.13 1.190 14.32
1 1/4 1.25 1.490 17.73
1 1/2 1.50 2.140 25.69
1 3/4 1.75 2.920 34.98
2 2.00 3.810 45.69
2 1/2 2.50 5.950 71.38
2 3/4 2.75 6.990 83.85
3 3.00 8.570 102.80
3 1/2 3.50 11.660 139.90
4 4.00 15.230 182.70
4 1/4 4.25 17.340 208.10
4 1/2 4.50 18.710 224.50
4 3/4 4.75 20.840 250.00
5 5.00 23.100 277.20
5 1/4 5.25 26.460 317.50
5 1/2 5.50 27.950 335.40
6 6.00 33.260 399.10
6 1/2 6.50 46.210 554.50
7 7.00 57.700 543.40
7 1/2 7.50 53.040 636.50
8 8.00 60.350 724.20
8 1/2 8.50 68.130 817.60
9 9.00 76.380 916.60
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
150
6 1/2 6.50 40.40 485
8 8.00 62.00 744
10 10.00 92.40 1108
11 11.00 114.10 1369
12 12.00 133.10 1597
13 13.00 159.40 1912
14 14.00 181.10 2173
15 15.00 207.90 2495
16 16.00 241.40 2897
17 17.00 272.50 3270
ALUMINUM ROUNDS*Extruded Yarde Bar
7075-T6ASTM B 221 ASTM B 594
Color: Black
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
Yarde Bar being sliced to length; the cost effective alternative to cutting from plate.
151
* Yarde Bar: Offers substantial cost savings over saw cut plate when slicedto length. Contact your sales representative for a cost comparison.
152
5 1/2 5.50 25.99 311.8
6 6.00 33.94 407.3
6 1/2 6.50 39.84 478.1
7 7.00 46.21 554.5
7 1/2 7.50 53.04 636.5
8 8.00 60.35 724.2
ALUMINUM ROUNDSCold Finish
7075-T73AMS QQ A 225/9 ASTM B 211
Color: Black
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
3/4 .750 .535 6.42
1 1.000 .952 11.42
1 1/8 1.125 1.193 14.32
1 1/4 1.250 1.487 12.52
1 3/8 1.375 1.799 21.58
1 1/2 1.500 2.141 25.69
1 5/8 1.625 2.490 29.88
1 3/4 1.750 2.915 34.98
2 2.000 3.808 45.69
2 1/8 2.125 4.258 51.10
2 1/4 2.250 4.819 57.82
2 3/8 2.375 5.400 64.80
2 1/2 2.500 5.949 71.38
2 5/8 2.625 6.370 76.44
2 3/4 2.750 7.199 86.33
3 3.00 8.570 102.80
3 1/4 3.25 10.050 120.60
3 1/2 3.50 11.660 139.90
3 3/4 3.75 13.390 160.60
4 4.00 15.230 182.70
4 1/4 4.25 17.030 204.40
4 1/2 4.50 19.200 230.40
4 3/4 4.75 21.660 259.90
5 5.00 23.100 277.20
5 1/4 5.25 25.990 311.90
5 1/2 5.50 28.700 344.40
5 3/4 5.75 31.300 375.60
6 6.00 33.900 406.80
6 1/4 6.25 36.840 442.00
6 1/2 6.50 39.840 478.10
7 7.00 46.210 554.50
7 1/2 7.50 53.040 636.50
8 8.00 60.350 724.20
ALUMINUM ROUNDSCold Finish
7075-T7351AMS QQ A 225/9 ASTM B 211 AMS 4124
Color: BlackSize in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
153
154
ALUMINUM HEXAGONSCold Finish
2011-T3ASTM B 211 QQ A 225/3
Color: Brown
3/16 .1875 .0372 .446
1/4 .2500 .0663 .796
5/16 .3125 .1035 1.242
11/32 .3437 .1205 1.446
3/8 .3750 .1491 1.789
25/64 .3906 .1600 1.920
7/16 .4375 .2029 2.435
1/2 .5000 .2650 3.180
9/16 .5625 .3354 4.024
5/8 .6250 .4141 4.969
11/16 .6875 .5010 6.012
3/4 .7500 .5963 7.156
13/16 .8125 .6870 8.240
7/8 .8750 .8116 9.739
15/16 .9375 .8964 10.760
1 1.0000 1.0600 12.720
1 1/16 1.0625 1.1910 14.300
1 1/8 1.1250 1.3380 15.720
1 3/16 1.1875 1.4380 17.260
1 1/4 1.2500 1.6560 19.870
1 5/16 1.3125 1.7570 21.080
1 3/8 1.3750 1.9280 23.140
1 7/16 1.4375 2.1070 25.290
1 1/2 1.5000 2.3400 28.080
1 5/8 1.6250 2.6930 32.320
1 7/8 1.8750 3.6600 42.920
2 2.0000 4.0800 48.960
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
Non-Standard size.
155
3/16 .1875 .0370 .444
1/4 .2500 .0656 .787
5/16 .3125 .1025 1.230
3/8 .3750 .1476 1.771
7/16 .4375 .1952 2.343
* 1/2 .5000 .2624 3.148
* 9/16 .5625 .3321 3.985
* 5/8 .6250 .4100 4.920
* 11/16 .6875 .4961 5.953
3/4 .7500 .5904 7.084
13/16 .8125 .6733 8.080
7/8 .8750 .8036 9.643
1 1.000 1.0500 12.600
1 1/16 1.063 1.1150 13.810
1 1/8 1.125 1.3280 15.930
1 1/4 1.250 1.6400 19.680
1 3/8 1.375 1.9840 23.800
1 1/2 1.500 2.3620 28.340
1 5/8 1.625 2.7300 32.760
1 3/4 1.750 3.2140 38.560
1 7/8 1.875 3.6900 44.280
2 2.000 4.1980 50.370
2 1/4 2.250 5.3140 63.760
2 1/2 2.500 6.5600 78.720
ALUMINUM HEXAGONSCold Finish
2024-T4 2024-T351AMS QQ A 225/6 ASTM B 211 AMS 4120
Color: RedSize in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
T4 temper under 1/2" cross section.*Stocked in both T4 and T351 Temper.
156
1/4 .2500 .0660 .792
5/16 .3125 .0996 1.195
3/8 .3750 .1432 1.720
*1/2 .5000 .2600 3.120
*5/8 .6250 .4000 4.800
11/16 .6875 .4821 5.785
3/4 .7500 .5729 6.840
7/8 .8750 .7790 9.350
15/16 .9375 .9320 11.190
1 1.0000 1.0180 12.240
1 1/8 1.1250 1.3200 15.840
1 1/4 1.2500 1.5910 19.080
1 3/8 1.3750 1.9250 23.100
1 1/2 1.5000 2.2910 27.480
1 3/4 1.7500 3.1190 37.440
2 2.0000 4.0800 48.960
ALUMINUM HEXAGONSCold Finish
6061-T6 6061-T651AMS QQ A 225/8 ASTM B 211 AMS 4117
Color: Blue
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
T6 temper under 1/2" cross section.*Stocked in both T6 and T651 Temper.
Pre-engineered parts using Custom Designed Extrusions.
ALUMINUM HEXAGONSCold Finish
6061-T6511AMS QQ A 200 ASTM B 221
13/16 .8125 .6733 8.080
7/8 .8750 .7809 9.371
1 1/8 1.1250 1.2910 15.490
1 1/4 1.2500 1.5940 19.130
1 3/8 1.3750 1.9280 23.140
1 1/2 1.5000 2.3400 28.080
1 7/8 1.8750 3.6600 42.920
2 2.0000 4.0800 48.960
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
ALUMINUM HEXAGONSCold Finish
7075-T6/7075-T651AMS QQA 225/9 ASTM B 211
Color: Black
1/4 .2500 .0638 .766
5/16 .3125 .0996 1.195
3/8 .3750 .1430 1.721
1/2 .5000 .2550 3.060
5/8 .6250 .3980 4.781
3/4 .7500 .5730 6.885
7/8 .8750 .7810 9.371
1 1.0000 1.0200 12.240
1 1/4 1.2500 1.5930 19.125
1 1/2 1.5000 2.2950 27.540
2 2.0000 4.0800 48.960
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
157
158
3/16 .1875 .0420 .50
1/4 .2500 .0750 .90
5/16 .3125 .1172 1.40
3/8 .3750 .1704 2.04
*1/2 .5000 .3300 3.96
*5/8 .6250 .4680 5.61
3/4 .7500 .6740 8.08
7/8 .8750 .9170 11.00
1 1.000 1.200 14.40
1 1/8 1.125 1.520 18.24
1 1/4 1.250 1.870 22.44
1 3/8 1.375 2.223 26.67
1 1/2 1.500 2.700 32.40
1 3/4 1.750 3.670 44.04
2 2.000 4.790 57.48
2 1/4 2.250 6.080 72.96
2 1/2 2.500 7.500 90.00
2 3/4 2.750 9.075 108.9
3 3.000 10.80 129.6
3 1/4 3.250 12.68 152.1
3 1/2 3.500 14.70 176.4
4 4.000 19.20 230.4
4 1/2 4.500 24.30 291.6
5 5.000 30.00 360.0
ALUMINUM SQUARESCold Finish
2024-T4 2024-T351AMS QQ A 225/6 ASTM B 211 AMS 4120
Color: RedSize in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
T4 temper under 1/2" cross section.*Stocked in both T4 and T351 Temper.
ALUMINUM SQUARESCold Finish
2011-T3ASTM B 221 ASTM B 594
Color: BrownSize in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
1/4 .2500 .0750 .905/16 .3125 .1172 1.403/8 .3750 .1704 2.04
159
Size in Inches
Decimal Size
Lbs. per ft.
8 8.00 76.80
10 10.00 124.00
12 12.00 172.80
*Yarde Bar: Offers substantial cost savings over saw cut plate when sliced to length. Contact sales representative for cost comparison.
ALUMINUM SQUARES*Extruded Yarde Bar
2024-T3ASTM B 221 ASTM B 594
Color: Red
ALUMINUM SQUARES*Extruded Yarde Bar
2024-T3511AMS QQ A 200/3 ASTM B 221 ASTM B 594
Color: Red
1 1/4 1.25 1.88 22.50
1 1/2 1.50 2.12 25.46
2 2.00 4.80 57.60
3 1/2 3.50 14.70 176.40
4 4.00 19.20 230.40
5 5.00 30.00 360.00
6 6.00 43.20 518.40
8 8.00 76.80 921.60
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
ALUMINUM SQUARES*Extruded Yarde Bar
5086-H111ASTM B 221 ASTM B 594
Color: Teal Blue
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
1 1.00 1.20 14.40
2 2.00 4.80 57.60
3 1/2 3.25 14.70 176.40
160
ALUMINUM SQUARESExtruded
6061-T6511AMS QQ A 200/8 ASTM B 221
Color: Blue
*1/4 .2500 .0740 .888
5/16 .3125 .1152 1.382
3/8 .3750 .1700 2.040
7/16 .4375 .2251 2.701
* 1/2 .5000 .2900 3.480
5/8 .6250 .4600 5.520
* 3/4 .7500 .6600 7.920
7/8 .8750 .9004 10.800
* 1 1.000 1.1800 14.160
1 1/8 1.125 1.4900 17.880
1 1/4 1.250 1.8400 22.080
1 3/8 1.375 2.2230 26.670
1 1/2 1.500 2.6500 31.800
1 5/8 1.625 3.1690 38.030
1 3/4 1.750 3.6000 43.200
*Also stocked in 6063-T52
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
Consider Custom Extrusions in your next design application.
161
2 2.000 4.70 56.4
2 1/4 2.250 5.96 71.5
2 1/2 2.500 7.38 88.5
2 3/4 2.750 8.90 106.7
3 3.00 10.57 126.8
3 1/4 3.25 12.42 149.0
3 1/2 3.50 14.39 172.6
4 4.00 18.80 225.6
4 1/2 4.50 23.81 285.7
5 5.00 29.38 325.5
5 1/2 5.50 35.57 426.8
6 6.00 42.36 508.3
7 7.00 58.80 705.6
7 1/4 7.25 63.08 756.9
7 1/2 7.50 67.50 810.0
7 3/4 7.75 72.08 864.9
8 8.00 76.80 921.6
8 1/2 8.50 86.70 1040.0
9 9.00 97.20 1166.0
9 1/2 9.50 108.30 1299.0
10 10.00 120.00 1440.0
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
ALUMINUM SQUARESExtruded
6061-T6511AMS QQ A 200/8 ASTM B 221
Color: Blue
162
Size in Inches
Decimal Size
Lbs. per ft.
ALUMINUM SQUARES*Extruded Yarde Bar
6061-T6ASTM B 221 QQ A 200/8
Color: Blue
6 1/2 6.50 49.00
7 7.00 58.00
7 1/2 7.50 67.00
7 3/4 7.75 70.70
9 9.00 95.25
9 1/2 9.50 108.00
11 11.00 156.00
12 12.00 169.30
14 14.00 230.50
16 16.00 301.00
*Yarde Bar offers substantial cost savings over saw cut plate when sliced to length.
5/8 .6250 .469 5.62
3/4 .7500 .675 8.10
1 1.000 1.200 14.40
1 1/2 1.500 2.700 32.40
2 2.000 4.790 57.48
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
ALUMINUM SQUARESExtruded
6061-T651AMS QQ A 200/8 ASTM B 221
Color: Blue
163
3/4 .750 .66 7.97
1 1.000 1.20 14.40
1 1/4 1.250 1.90 22.80
1 1/2 1.500 2.66 31.92
1 3/4 1.750 3.70 44.40
2 2.000 4.72 56.64
2 1/2 2.500 7.40 88.80
3 3.00 10.90 130.80
3 1/2 3.50 14.70 176.40
4 4.00 19.40 232.80
5 5.00 30.00 360.00
ALUMINUM SQUARESCold Finish
7075-T651 AMS QQ A 225/9 ASTM B 211 AMS 4123
Color: Black
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
164
6 6.00 43.60 523.208 8.00 76.80 921.609 3/4 9.75 114.07 1368.8010 10.00 120.00 1440.0012 12.00 172.80 2073.60
ALUMINUM SQUARES*Extruded Yarde Bar
7075-T6ASTM B 221 ASTM B 594
Color: Black
1 1.000 1.20 14.401 1/4 1.250 1.90 22.181 1/2 1.500 2.70 32.401 3/4 1.750 3.70 44.402 2.000 4.72 56.642 1/2 2.500 7.50 90.003 3.000 10.80 129.603 1/2 3.500 14.70 176.404 4.000 19.20 230.405 5.000 30.00 360.00
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
* Yarde Bar: Offers substantial cost savings over saw cut plate when sliced to length. Contact a sales representative for cost comparison.
ALUMINUM SQUARESCold Finish
7075-T7351AMS QQ A 225/9 ASTM B 211 AMS 4124
Color: Black
1 1/2 1.500 2.70 32.40
2 1/2 2.500 7.50 90.00
3 3.000 10.80 129.60
3 1/2 3.500 14.70 176.40
4 4.000 19.20 230.40
5 5.000 30.00 360.00
6 6.000 43.60 523.20
8 8.000 77.57 930.84
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
ALUMINUM SQUARESCold Finish
7075-T6511AMS QQ A 200/11 ASTM B 221
Color: Black
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
165
ALUMINUM RECTANGLESCold Finish
2024-T4AMS QQ A 225/6 ASTM B 211 AMS 4120
Color: RedLbs. Est. lbs.
THK Width per ft. 12' bar
1/8 x 3/4 .1136 1.363
1 .1515 1.818
1 1/4 .1894 2.273
1 1/2 .2273 2.728
2 .3030 3.636
3/16 x 1/2 .1136 1.363
3/4 .1659 1.990
1 .2212 2.654
1 1/4 .2765 3.318
1 1/2 .3318 3.981
2 .4425 5.310
1/4 x 1/2 .1475 1.770
5/8 .1843 2.211
3/4 .2212 2.654
7/8 .2651 3.181
1 .2950 3.540
1 1/4 .3687 4.424
1 1/2 .4425 5.310
2 .5900 7.080
2 1/2 .7375 8.850
3 .8850 10.620
4 1.1800 14.160
166
Lbs. Est. lbs.THK Width per ft. 12' bar
5/16 x 1/2 .1843 2.211
3/4 .2765 3.318
1 .3687 4.424
1 1/2 .5531 6.637
2 .7500 9.000
3/8 x 1/2 .2273 2.728
5/8 .2810 3.372
3/4 .3318 3.981
1 .4425 5.310
1 1/4 .5531 6.637
1 1/2 .6637 7.964
2 .8850 10.620
2 1/2 1.1058 13.270
3 1.3267 15.920
4 1.7700 21.240
6 2.6550 31.860
ALUMINUM RECTANGLESCold Finish
2024-T4AMS QQ A 225/6 ASTM B 211 AMS 4120
Color: Red
167
1/2 x 5/8 .3788 4.55
3/4 .4425 5.31
7/8 .5303 6.36
1 .5900 7.08
1 1/4 .7575 9.09
1 1/2 .8850 10.62
1 3/4 1.0610 12.73
2 1.1800 14.16
2 1/2 1.4750 17.70
3 1.7700 21.34
4 2.3600 28.32
5 3.0000 36.00
6 3.5400 42.48
5/8 x 3/4 .5531 6.64
1 .7575 9.09
1 1/4 .9218 11.06
1 1/2 1.1060 13.27
2 1.4750 17.70
2 1/4 1.6880 20.25
ALUMINUM RECTANGLESCold Finish
2024-T351AMS QQ A 225/6 ASTM B 211 AMS 4120
Color: RedLbs. Est. lbs.
THK Width per ft. 12' bar
3/4 x 1 .8850 10.61
1 1/4 1.1360 13.63
1 1/2 1.3270 15.92
2 1.7700 21.24
2 1/2 2.2120 26.54
3 2.6550 31.86
4 3.6400 43.80
6 5.4000 64.80
7 6.3000 75.60
8 7.2000 86.40
7/8 x 1 1/4 1.3130 15.75
168
1 x 1 1/4 1.515 18.18
1 1/2 1.770 21.40
1 3/4 2.100 25.20
2 2.360 28.32
2 1/2 2.950 35.40
3 3.540 42.48
3 1/2 4.200 50.40
4 4.720 56.64
6 7.190 86.28
8 9.600 115.20
1 1/16 x 1 1/2 1.913 22.95
1 1/4 x 1 1/2 2.273 27.28
2 3.030 36.36
2 1/2 3.788 45.46
3 4.545 54.54
4 6.100 73.20
1 1/2 x 2 3.540 42.48
2 1/2 4.425 53.10
3 5.310 63.72
4 7.080 84.96
5 9.000 108.00
6 10.620 127.40
1 3/4 x 3 6.195 74.34
Lbs. Est. lbs.THK Width per ft. 12' bar
ALUMINUM RECTANGLESCold Finish
2024-T351AMS QQ A 225/6 ASTM B 211 AMS 4120
Color: Red
169
2 x 2 1/2 6.00 72.0
3 7.08 85.0
4 9.44 113.2
4 1/2 10.80 129.9
5 11.80 141.6
6 14.16 169.9
2 1/4 x 4 10.80 129.6
2 1/2 x 3 8.85 106.2
3 1/2 10.61 127.3
4 12.00 144.0
5 14.75 177.0
6 18.00 216.0
3 x 4 14.40 172.8
5 17.70 218.2
6 21.60 259.2
4 x 5 24.00 288.0
6 28.80 345.6
Lbs. Est. lbs.THK Width per ft. 12' bar
ALUMINUM RECTANGLESCold Finish
2024-T351AMS QQ A 225/6 ASTM B 211 AMS 4120
Color: Red
170
1/2 x 4 2.40 28.8
6 3.60 43.2
8 4.80 57.6
3/4 x 3 2.70 32.4
4 3.70 44.4
6 5.40 64.8
8 7.20 86.4
1 x 3 3.60 43.2
3 1/2 4.20 50.4
4 4.80 57.6
6 7.20 86.4
8 9.60 115.2
1 1/4 x 2 1/2 3.75 45.0
3 4.50 54.0
1 1/2 x 3 5.40 64.8
4 7.20 86.4
6 10.80 129.6
8 14.40 172.8
2 x 2 1/2 6.00 72.0
3 7.20 86.4
4 9.60 115.2
6 14.40 172.8
8 19.20 230.4
2 1/2 x 3 9.00 108.0
4 12.00 144.0
6 18.00 216.0
8 24.00 288.0
3 x 4 14.40 172.8
6 21.60 259.2
8 28.80 345.6
4 x 6 28.80 345.6
8 38.40 460.8
Lbs. Est. lbs.THK Width per ft. 12' bar
ALUMINUM RECTANGLESExtruded
2024-T3511AMS QQ A 200/3 ASTM B 221
Color: Red
171
1/8 x 1/2 .0737 1.179
5/8 .0921 1.105
3/4 .1106 1.327
1 .1475 1.770
1 1/4 .1843 2.211
1 1/2 .2212 2.654
1 3/4 .2581 3.097
2 .2950 3.540
2 1/4 .3375 4.050
2 1/2 .3687 4.424
3 .4425 5.310
3 1/2 .5162 6.194
4 .5900 7.080
5 .7500 9.000
6 .9000 10.800
3/16 x 3/8 .0829 .995
1/2 .1106 1.327
5/8 .1406 1.688
3/4 .1659 1.990
1 .2212 2.654
1 1/4 .2765 3.318
1 1/2 .3318 3.981
1 3/4 .5162 8.259
2 .4425 5.310
2 1/4 .4978 5.974
2 1/2 .5531 6.637
3 .6700 8.040
4 .8850 10.620
6 7/8 1.5460 18.562
Lbs. Est. lbs.THK Width per ft. 12’ bar
ALUMINUM RECTANGLESExtruded
6061-T6511AMS QQ A 200/8 ASTM B 221
172
1/4 x 3/8 .1125 1.350
1/2 .1475 1.770
5/8 .1843 2.211
3/4 .2212 2.654
7/8 .2570 3.084
1 .2950 3.540
1 1/4 .3687 4.424
1 3/8 .4125 4.950
1 1/2 .4425 5.310
1 5/8 .4793 5.751
1 3/4 .5162 6.194
2 .5900 7.080
2 1/4 .6637 7.964
2 1/2 .7375 8.850
3 .8850 10.620
3 1/2 1.0320 12.380
4 1.1800 14.600
4 1/2 1.3270 15.920
5 1.4750 17.700
5 1/2 1.5000 18.000
6 1.7700 21.240
6 1/2 1.9500 23.400
7 2.1000 25.200
7 1/2 2.2500 27.000
8 2.3600 28.320
9 2.6500 31.800
10 2.9500 35.400
12 3.5400 42.480
ALUMINUM RECTANGLESExtruded
6061-T6511AMS QQ A 200/8 ASTM B 221
Lbs. Est. lbs.THK Width per ft. 12' bar
173
5/16 x 1/2 .1843 2.211
3/4 .2765 3.318
1 .3687 4.424
1 1/4 .4609 5.530
1 1/2 .5531 6.637
2 .7380 8.850
2 1/2 1.1330 13.600
3 1.3500 16.200
4 1.5000 18.000
6 1/2 2.4380 29.250
3/8 x 1/2 .2212 2.654
5/8 .2765 3.318
3/4 .3318 3.981
1 .4425 5.310
1 1/4 .5531 6.637
1 3/8 .6180 7.416
1 1/2 .6637 7.964
1 3/4 .7743 9.291
2 .8850 10.620
2 1/4 1.0130 12.160
2 1/2 1.1058 13.270
3 1.3267 15.920
3 1/2 1.5480 18.570
ALUMINUM RECTANGLESExtruded
6061-T6511AMS QQ A 200/8 ASTM B 221
Lbs. Est. lbs.THK Width per ft. 12' bar
174
3/8 x 4 1.770 21.24
4 1/2 1.991 23.89
5 2.212 26.54
5 1/2 2.475 29.70
6 2.655 31.86
7 3.150 37.80
8 3.637 43.64
9 4.050 48.60
10 4.549 54.59
12 5.457 65.48
ALUMINUM RECTANGLESExtruded
6061-T6511AMS QQ A 200/8 ASTM B 221
Lbs. Est. lbs.THK Width per ft. 12' bar
Eliminate multiple machining operations with aCustom Designed Extrusion.
175
1/2 x 5/8 .369 4.43
3/4 .443 5.32
7/8 .525 6.30
1 .590 7.08
1 1/4 .664 7.67
1 3/8 .811 9.73
1 1/2 .885 10.62
1 5/8 .959 11.51
1 3/4 1.032 12.38
2 1.179 14.16
2 1/4 1.359 16.32
2 1/2 1.475 17.70
3 1.768 21.24
3 1/8 1.843 22.11
3 1/4 1.916 23.00
3 1/2 2.065 24.78
4 2.358 28.32
4 1/4 2.550 30.60
4 1/2 2.655 31.86
5 2.947 35.40
5 1/2 3.297 39.60
6 3.357 42.48
6 1/2 3.900 46.80
7 4.197 50.40
8 4.836 58.08
9 5.396 64.80
10 6.049 72.65
12 7.256 87.14
14 8.468 101.70
ALUMINUM RECTANGLESExtruded
6061-T6511AMS QQ A 200/8 ASTM B 221
Lbs. Est. lbs.THK Width per ft. 12' bar
176
ALUMINUM RECTANGLESExtruded
6061-T6511AMS QQ A 200/8 ASTM B 221
5/8 x 3/4 .553 6.64
1 .737 8.84
1 1/4 .922 11.06
1 1/2 1.106 13.27
1 3/4 1.287 15.44
2 1.475 17.70
2 1/2 1.841 22.11
3 2.210 26.54
3 1/2 2.625 31.50
4 2.946 35.40
5 3.686 44.24
5 1/16 3.797 45.56
6 4.421 53.10
6 1/2 4.876 58.56
7 5.250 63.00
8 6.018 72.28
8 3/8 6.281 75.38
9 6.744 81.00
10 7.529 90.42
12 9.034 108.50
14 10.550 126.60
Lbs. Est. lbs.THK Width per ft. 12' bar
177
3/4 x 1 .885 10.62
1 1/4 1.106 13.27
1 1/2 1.327 15.92
1 3/4 1.548 18.57
2 1.769 21.24
2 1/4 1.989 23.89
2 1/2 2.210 26.54
3 2.653 31.86
3 1/2 3.094 37.16
4 3.537 42.48
4 1/2 3.978 47.78
5 4.425 53.10
6 5.306 63.72
7 6.295 75.60
8 7.239 86.94
9 8.099 97.20
10 9.066 108.80
12 10.867 130.52
14 12.898 154.79
7/8 x 2 2.100 25.20
2 1/4 2.358 28.30
6 6.300 75.60
8 8.433 101.20
9 9.450 113.40
10 10.541 126.49
ALUMINUM RECTANGLESExtruded
6061-T6511AMS QQ A 200/8 ASTM B 221
Lbs. Est. lbs.THK Width per ft. 12' bar
178
1 x 1 1/4 1.50 18.00
1 1/2 1.80 21.60
1 3/4 2.12 25.45
2 2.35 28.22
2 1/4 2.70 32.38
2 1/2 2.99 35.99
3 3.52 42.34
3 1/4 3.90 46.80
3 1/2 4.19 50.39
4 4.71 56.52
4 1/2 5.29 63.50
5 5.87 70.55
5 1/2 6.59 79.19
6 7.20 86.40
7 8.40 100.82
8 9.65 115.89
9 10.80 129.61
10 12.07 144.85
12 14.48 173.77
13 15.68 188.16
14 16.89 202.68
16 19.20 230.40
1.024 x 14 17.20 206.40
ALUMINUM RECTANGLESExtruded
6061-T6511AMS QQ A 200/8 ASTM B 221
Lbs. Est. lbs.THK Width per ft. 12' bar
179
1 1/4 x 1 1/2 2.25 27.0
1 3/4 2.57 30.9
2 3.00 36.0
2 1/2 3.70 44.4
3 4.50 54.0
3 1/4 4.88 58.5
3 1/2 5.15 61.7
4 6.00 72.0
4 1/2 6.62 79.4
5 7.35 88.2
5 1/4 7.88 94.5
5 1/2 8.25 99.0
6 9.00 108.0
7 10.50 126.0
8 12.02 144.2
9 13.50 162.0
10 15.03 180.4
12 18.03 216.4
12 1/2 18.75 225.0
14 21.03 252.4
16 24.00 288.0
ALUMINUM RECTANGLESExtruded
6061-T6511AMS QQ A 200/8 ASTM B 221
Lbs. Est. lbs.THK Width per ft. 12' bar
1 1/2 x 1 3/4 3.10 37.2
2 3.54 42.52 1/4 4.05 48.62 1/2 4.43 53.12 3/4 4.95 59.4
3 5.31 63.73 1/2 6.11 74.3
4 7.08 85.04 1/2 8.30 99.6
5 8.85 106.26 10.62 127.47 12.60 151.28 14.16 169.99 16.20 194.410 17.60 212.012 21.59 259.014 25.18 302.116 28.80 345.6
1 3/4 x 2 4.13 49.62 1/2 5.15 61.7
3 6.11 74.33 1/2 7.35 88.2
4 8.26 99.14 1/2 9.45 113.4
5 10.50 126.05 1/2 11.32 135.8
6 12.60 151.27 1/2 15.76 189.18 16.80 201.69 19.11 229.3
10 21.02 252.212 25.21 302.514 29.40 352.816 33.60 403.2
ALUMINUM RECTANGLESExtruded
6061-T6511AMS QQ A 200/8 ASTM B 221
Lbs. Est. lbs.THK Width per ft. 12' bar
180
181
2 x 2 1/4 5.31 63.7
2 1/2 5.90 70.8
3 7.08 84.9
3 1/2 8.26 99.1
4 9.44 113.2
4 1/2 10.62 127.4
5 11.80 141.6
6 14.16 169.9
7 16.80 201.6
8 19.19 230.4
9 21.60 259.2
10 24.01 288.2
10 3/4 25.80 309.6
12 28.81 345.7
14 33.61 403.3
16 38.40 460.8
2.100 x 12.15 30.62 367.4
2 1/4 x 3 8.10 97.2
3 1/2 9.26 111.1
4 10.80 129.6
4 1/4 11.48 137.8
5 1/2 14.85 178.2
12 32.40 388.8
13 35.04 420.5
13 1/8 35.44 425.3
16 43.12 517.5
ALUMINUM RECTANGLESExtruded
6061-T6511AMS QQ A 200/8 ASTM B 221
Lbs. Est. lbs.THK Width per ft. 12' bar
182
2 3/8 x 7.100 20.24 242.8
2 1/2 x 3 8.85 106.2
3 1/2 10.32 123.8
4 11.75 141.0
4 1/2 13.27 159.2
5 14.75 177.0
6 17.70 212.4
8 23.60 283.2
10 29.50 354.0
12 36.00 432.0
14 42.00 504.0
16 48.00 576.0
3 x 3 1/2 12.60 151.2
4 14.16 169.9
4 1/2 15.93 191.1
5 17.70 212.4
6 21.24 254.8
7 25.20 302.4
7 1/4 26.10 313.2
8 28.80 345.6
10 36.00 432.0
12 43.16 517.9
14 51.10 613.2
16 57.60 691.2
Lbs. Est. lbs.THK Width per ft. 12' bar
ALUMINUM RECTANGLESExtruded
6061-T6511AMS QQ A 200/8 ASTM B 221
Lbs. Est. lbs.THK Width per ft. 12' bar
183
3 1/2 x 4 16.46 197.5
4 1/2 18.90 226.8
5 21.00 252.0
6 24.78 297.4
8 32.93 395.2
10 42.10 505.2
12 50.45 605.4
14 58.90 706.8
16 67.23 806.8
4 x 4 1/2 21.60 259.2
5 24.00 288.0
5 1/2 26.40 316.8
6 28.32 339.8
8 38.40 460.8
10 48.20 578.4
12 57.90 694.8
14 67.00 804.0
16 76.80 921.6
4 1/2 x 5 1/2 29.70 356.4
5 x 6 36.00 432.0
8 48.00 576.0
10 60.00 720.0
6 x 8 57.60 691.2
10 72.00 864.0
7 x 10 84.00 1008.0
8 x 10 96.00 1152.0
ALUMINUM RECTANGLESExtruded
6061-T6511AMS QQ A 200/8 ASTM B 221
184
ALUMINUM RECTANGLESExtruded
6063-T52ASTM B 221
1/8 x 1/2 .0750 .900
3/4 .1106 1.769
1 .1475 2.360
1 1/4 .1870 2.992
1 1/2 .2212 3.539
1 3/4 .2581 4.129
2 .2950 4.720
3 .4500 5.400
3/16 x 1/2 .1106 1.769
3/4 .1659 2.654
1 .2212 3.539
1 1/4 .2750 4.400
1 1/2 .3318 5.308
1 3/4 .3940 6.304
2 .4425 7.080
1/4 x 1/2 .1475 2.360
5/8 .1843 2.948
3/4 .2212 3.539
1 .2950 4.720
1 1/2 .4425 7.080
2 .5900 9.440
2 1/2 .7375 11.800
3 .8850 14.160
4 1.1800 18.880
Lbs. Est. lbs.THK Width per ft. 16' bar
185
3/8 x 3/4 .331 5.30
1 .443 7.08
1 1/2 .664 10.61
2 .885 14.61
2 1/2 1.100 17.60
3 1.320 21.12
4 1.800 28.80
1/2 x 3/4 .449 7.18
1 .590 9.44
1 1/4 .750 12.00
1 1/2 .885 13.68
2 1.180 18.88
3/4 x 1 .900 10.80
1 1/4 1.125 18.00
1 1/2 1.350 16.20
1 x 1 1/2 1.800 21.60
ALUMINUM RECTANGLESExtruded
6063-T52ASTM B 221
Lbs. Est. lbs.THK Width per ft. 16' bar
Lbs. Est. lbs.THK Width per ft. 12' bar
ALUMINUM RECTANGLESCold Finish
7075-T6AMS QQ A 225/9 ASTM B 211 AMS 4123
Color: Black
1/4 x 2 .600 7.20
3/8 x 1 .450 5.40
1 1/2 .675 8.10
2 .900 10.80
186
187
Lbs. Est. lbs.THK Width per ft. 12' bar
ALUMINUM RECTANGLESCold Finish
7075-T651AMS QQ A 225/9 ASTM B 211 AMS 4123
Color: Black
1/2 x 3/4 .450 5.40
1 .600 7.20
1 1/4 .758 9.10
1 1/2 .900 10.80
2 1.200 14.40
3 1.810 21.72
4 2.360 28.32
3/4 x 1 .885 10.62
1 1/2 1.360 16.32
2 1.770 21.24
2 1/2 2.250 27.00
3 2.700 32.40
3 1/2 3.150 37.80
4 3.600 43.20
1 x 1 1/2 1.818 21.81
2 2.360 28.32
2 1/2 3.000 36.00
3 3.600 43.20
3 1/2 4.200 50.40
4 4.800 57.60
5 6.000 72.00
1 1/4 x 1 1/2 2.270 27.24
2 3.000 36.00
1 1/2 x 2 3.540 42.48
2 1/4 4.050 48.60
2 1/2 4.425 53.10
3 5.400 64.80
3 1/2 6.300 75.60
4 7.700 92.40
1 3/4 x 3 6.200 74.40
4 8.259 99.11
2 x 2 1/2 6.000 72.00
3 7.299 87.59
4 9.600 115.20
188
Lbs. Est. lbs.THK Width per ft. 12' bar
ALUMINUM RECTANGLESExtruded
7075-T6511AMS QQ A 200/11 ASTM B 221
Color: Black
2 x 4 9.60 115.0
6 14.16 169.9
8 19.20 230.4
2 1/2 x 4 12.00 144.0
6 17.70 212.4
8 24.00 288.0
3 x 6 21.24 254.8
8 28.80 345.6
3 1/2 x 6 24.78 297.3
8 33.60 403.2
4 x 6 29.25 351.0
8 37.76 453.1
6 x 8 56.64 679.6
2 1/2 x 3 8.82 105.80
4 12.00 144.00
6 18.00 216.00
3 x 4 14.16 169.90
5 17.70 212.40
6 21.80 261.60
3 1/2 x 5 21.00 252.00
ALUMINUM RECTANGLESCold Finish
7075-T651AMS QQ A 225/9 ASTM B 211 AMS 4123
Color: BlackLbs. Est. lbs.
THK Width per ft. 12' bar
189
1 x 2 2.40 28.80
2 1/2 3.00 36.00
3 3.54 42.48
4 4.80 57.60
1 1/4 x 2 2.95 35.40
1 1/2 x 2 3.54 42.48
2 1/2 4.53 54.30
3 5.40 64.80
4 7.08 84.96
1 3/4 x 2 4.13 49.56
2 1/2 5.25 63.00
2 x 2 1/2 5.90 70.80
3 7.08 84.96
4 9.44 113.28
5 11.80 141.60
2 1/4 x 3 1/2 10.50 126.00
4 10.62 127.44
5 13.27 159.24
2 1/2 x 3 8.85 106.20
3 1/2 10.50 126.00
4 12.10 145.20
4 1/2 13.27 159.24
6 18.00 216.00
3 x 4 14.40 172.80
5 18.00 216.00
6 21.60 259.20
ALUMINUM RECTANGLESCold Finish
7075-T7351AMS QQ A 225/9 ASTM B 211 AMS 4124
Color: BlackLbs. Est. lbs.
THK Width per ft. 12' bar
MIL STD 2154 available upon request.
STAINLESS BAR GUIDE to
AUSTENITIC GRADESNon-Magnetic Non-Heat Treatable
Austenitic Stainless steels contain chromium and nickel as the principal alloying elements. They can behardened only by cold working. In the annealed condition, they are not attracted to a magnet and maybecome slightly magnetic after cold working.
302 High carbon version (.12 max carbon) of chromium/nickel grade 304. Properties are similar.
303 YM - Yarde Melt- Superior Screw Machine StockPremium quality 303 stainless produced out of the pre-cise control of chemical and physical properties.Melted in electric arc furnaces, refined in AOD(argon-oxygen- decarburization) vessels, then continuouslycast into billets for superior machinability. Stringent millquality control ensures uniformity from heat to heat,enhanced surface finish, yielding more parts per hour.For use in all automatic and CNC screw machines.
303 YM PG - Yarde Melt - Precision Ground - SpecialYarde Melt grade to enhance machining characteristics.Reduces vibration, eliminates “high spot” problems, andincreases metal removal rates. Includes 1 end chamfered 45 degrees can also be ordered with bothends chamfered upon availability. Mated end sharp-ened for use with hydrostatic feed bars Micro Finish 24max. Designed for Swiss Style Machining - CNC &CAM machines, Multi and Single Spindle Bar Machines,Hydraulic Bar Feeders, increased RPM’s.
303 Screw Machine Stock- addition of sulphur to thebasic 18-8 (304) variety enhances machinability by acting as an effective chip breaker. Primarily used inautomatic screw machines and larger parts requiringextensive machine operations.
304/304L YM - Yarde Melt Premium quality 304 stainless produced out of the precise control of chemi-cal and physical properties. Melted in electric arc fur-naces, refined in AOD (argon-oxygen decarburization)vessels, improves machinability over standard 304.Stringent mill quality control ensures uniformity fromheat to heat.
190
304/304L YM PG - Yarde Melt - Precision Ground -Special Yarde Melt grades to enhance machining char-acteristics. Reduces vibration, eliminates “high spot”problems, and increases metal removal rates. Includes1 end chamfered 45 degrees can also be ordered withboth ends chamfered upon availability. Mated endsharpened for use with hydrostatic feed bars MicroFinish 24 max. Designed for Swiss Style Machining -CNC & CAM machines, Multi and Single Spindle BarMachines, Hydraulic Bar Feeders, increased RPM’s.
304 With a carbon content of .08 max, it is the most universally used grade. It has good corrosion resistancein many corrosive environments. This weldable andformable stainless has excellent mechanical propertieswhile offering moderate machinability.
304L (extra low carbon) Control of carbon to .03 maxprovides superior resistance to intergranular corrosion ifwelded or otherwise heated to temperatures between800-1600 degrees F. It is recommended for use inassemblies which are fabricated by welding and whichpost annealing will not be performed.
316/316L YM - Yarde Melt Premium quality 316 stainless produced out of the precise control of chemicaland physical properties. Melted in electric arc furnaces,refined in AOD (argon-oxygen decarburization) vessels,improves machinability over standard 304. Stringentmill quality control ensures uniformity from heat to heat.
316/316L YM PG - Yarde Melt - Precision Ground -Special Yarde Melt grade to enhance machining characteristics. Reduces vibration, eliminates “highspot” problems, and increases metal removal rates.Includes 1 end chamfered 45 degrees can also beordered with both ends chamfered upon availability.Mated end sharpened for use with hydrostatic feed barsMicro Finish 24 max. Designed for Swiss StyleMachining - CNC & CAM machines, Multi and SingleSpindle Bar Machines, Hydraulic Bar Feeders,increased RPM’s.
316 Has excellent corrosion resistance with slightlymore nickel than Type 304 and with the addition of 2.00- 3.00 molybdenum. It will resist the pitting action inmany acids and sea water. For maximum corrosion re-sistance materials should be in the annealed conditionand parts should be passivated.
316L (extra low carbon) .03 max resists intergranularcorrosion from welding. See 304 L above.
191
321 Titanium Stabilized. Excellent resistance to corrosion and oxidation while possessing high creepresistance. The possibility of intergranular corrosion isreduced. This alloy is used primarily for parts fabricatedby welding without post annealing.
347 Columbium Tantalum Stabilized. Virtually overcomes the problems of carbide precipitation and intergranular corrosion. For many aircraft parts fabricated by welding and which post annealing will notbe performed.
Nitronic 50 A nitrogen strengthened stainless that provides a combination of corrosion resistance andstrength. Corrosion resistance greater than that of 316with twice the yield strength. Good mechanicalproperties at both elevated and cryogenic temperatures.
Nitronic 60 Excellent galling resistance steel, with twice the yield strength of 304; with comparable corrosion resistance.
192
STAINLESS BAR GUIDE to
MARTENSITIC GRADESMagnetic Heat Treatable
Martensitic Stainless steels are straight-chromium typesbearing 400 series numbers. They can be hardened to tensile strengths exceeding 200,000 psi. They resist cor-rosion in mild environments and they are always highly magnetic.
403 Magnetic in all conditions, this grade offers a widerange of mechanical properties. Primarily used for bladesin various turbine applications.
410 General purpose chromium grade is magnetic in allconditions. Possesses good mechanical properties and ishardened by conventional heat treating. Moderate resist-ance to corrosion.
416 Screw Machine Stock - sulfur added to improvemachinability while retaining the basic properties of 410.Commercial 416 is hardenable to RC 40 min. When hard-ened in a protective atmosphere, lower value will result.
416 HT Pre-Heat Treated to a RC 26-32.
416 PG - Precision Ground - Special Yarde Melt gradesto enhance machining characteristics. Reduces vibration,eliminates “high spot” problems, and increases metalremoval rates. Includes 1 end chamfered 45 degrees canalso be ordered with both ends chamfered upon availabili-ty. Mated end sharpened for use with hydrostatic feedbars Micro Finish 24 max. Designed for Swiss StyleMachining - CNC & CAM machines, Multi and SingleSpindle Bar Machines, Hydraulic Bar Feeders, increasedRPM’s.
420 Normally used in the heat treated condition and canbe hardened to approx RC 50 where corrosion resistanceis the best.
420F Is the free machining version of RC 40 made possi-ble with the addition of sulphur.
440C High carbon general purpose steel can be heattreated to RC 60. High strength and corrosion resistance.Also has good abrasion resistance.
440C PG - Precision Ground - Special Yarde Melt gradesto enhance machining characteristics. Reduces vibration,eliminates “high spot” problems, and increases metalremoval rates. Includes 1 end chamfered 45 degrees canalso be ordered with both ends chamfered upon availabili-ty. Mated end sharpened for use with hydrostatic feedbars Micro Finish 24 max. Designed for Swiss StyleMachining - CNC & CAM machines, Multi and SingleSpindle Bar Machines, Hydraulic Bar Feeders, increasedRPM’s.
193
Ferritic Steels are straight-chromium types identified by400 series numbers. The low carbon-to-chromium ratioeliminates effects of thermal transformation. They canbe hardened slightly by cold-working, however the ferrit-ic stainless steels are strongly attracted to a magnet,have good ductility, and have good resistance to corro-sion and oxidation.
430 .12 max carbon, nearly approximates the corrosion resistance of 304 but is easier to machine. It has good cold forming properties.
430F The free machining version of 430. With the addition of sulphur, machinability is increased 30 to40%. Magnetic in all conditions and non-hardenable byheat treatment. Used in automatic machining of partsfor solenoid valves aircraft parts and gears.
STAINLESS BAR GUIDE to
FERRITIC
Magnetic Non-Heat Treatable
194
PH Grades are martensitic magnetic stainless steels,can be hardened by a low temperature heat treatment, thereby minimizing scaling and distortion andallowing parts to be machined to close tolerances priorto heat treatment. Developed strengths up to 200,000psi tensile in condition H 900. Corrosion resistance inmost applications and media. It is comparable to Type304.
17-4 or 630 Metal is a stainless steel that is widelyaccepted in a broad range of industrial usages. Thisgrade can be hardened by a relatively low temperaturethermal treatment. Possessing excellent mechanicalproperties with minimum scaling or distortion. Corrosionresistance similar to 304 in most environments. Readilyweldable by conventional methods. In Condition Amachinability is approximately 50% of 304.
17-4 PG - Precision Ground - Special Yarde Meltgrade to enhance machining characteristics. Reducesvibration, eliminates “high spot” problems, and increasesmetal removal rates. Includes 1 end chamfered 45degrees can also be ordered with both ends chamferedupon availability. Mated end sharpened for use withhydrostatic feed bars Micro Finish 24 max. Designed forSwiss Style Machining - CNC & CAM machines, Multiand Single Spindle Bar Machines, Hydraulic BarFeeders, increased RPM’s.
15-5 Is stainless steel that offers all the advantages of17-4. It is essentially free of delta ferrite with improvedtransverse notch-toughness and better forgeability. Ithas good machining properties.
13-8 Provides a combination of excellent toughness andgood transverse mechanical properties, in addition tohaving the highly desirable corrosion resistance andhigh strength. It is produced by vacuum induction melting and consumable electrode vacuum arc remelting.
STAINLESS BAR GUIDE to
PRECIPITATION HARDENING Magnetic Heat Treatable
195
GRADE APPROX MACHINABILITY TENSILE YIELD HARDNESSSFPM RATING % PSI PSI BHN
303EZa 132-160 85 75,000 30,000 190
302Cond B 45-70 38 116,000 94,000 262
303 105-130 70 85,000 45,000 180
303YMb 132-165 88 100,000 60,000 205
304 75-100 48 85,000 45,000 180
304/304LYMb 80-110 50 80,000 43,000 150
316 70-85 45 90,000 60,000 185
316/316LYMb 75-95 48 85,000 55,000 155
321 75-90 48 85,000 45,000 177
347 75-90 48 90,000 45,000 187
410 90-110 60 85,000 40,000 175
416 120-150 90 90,500 77,000 203
418Greek Ascoloy70-110 50 140,000 130,000 277
420 85-100 55 95,000 50,000 195
430 85-100 55 75,000 45,000 170
430F 140-170 90 80,000 45,000 175
440C 60-75 40 100,000 60,000 240
13-8 55-80 36 160,000 120,000 311
15-5 60-75 40 160,000 145,000 341
17-4 70-85 45 155,000 120,000 321
17-4Cond 1150 80-100 50 145,000 125,000 311
Nitronic 60c 50-65 22 108,000 60,000 201
A-286Sol Treat 54-72 28 85,000 36,000 150
600 47-65 22 265
718 20-35 12 223
Wasployd 40-55 9 214
STAINLESS AND HIGH TEMP ALLOYSMACHINABILITY COMPARISON
Approx Values Annealed ConditionExcept as notedB1112=100%
a. Trademark AL-Tech Steelb. Trademark Yarde Metals Inc.c. Trademark Armco Steel Corp.
196
197
198
199
200
201
3/32 .0937 .0235 .2820
7/64 .1094 .0320 .3840
1/8 .1250 .0417 .5004
.1310 .0450 .5412
9/64 .1406 .0528 .6336
5/32 .1562 .0652 .7824
.1610 .0700 .8400
11/64 .1719 .0789 .9468
3/16 .1875 .0939 1.127
.1925 .0993 1.192
13/64 .2031 .1102 1.322
7/32 .2187 .1278 1.534
15/64 .2344 .1470 1.764
1/4 .2500 .1669 2.003
.2560 .1736 2.083
STAINLESS ROUNDSYarde Melt
303YM Optimum Free Machining Better Tool Life Consistency from Heat to Heat
Improved Surface Finishes 1 End Chamfered 45ASTM A 582 AMS 5640
Color: Florescent Green
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
Re-grind sizesWe stock companion inventory of all Commercial Grades.
303YM - Superior Machining Grade for a multitude of applications.
202
17/64 .2656 .1884 2.261
9/32 .2812 .2113 2.536
19/64 .2969 .2350 2.820
5/16 .3125 .2608 3.130
.3175 .2700 3.240
21/64 .3281 .2875 3.450
11/32 .3437 .3156 3.787
3/8 .3750 .3755 4.506
.3810 .3856 4.627
25/64 .3906 .4074 4.889
13/32 .4062 .4408 5.290
7/16 .4375 .5111 6.133
.4400 .5239 6.287
15/32 .4687 .5869 7.043
1/2 .5000 .6676 8.011
.5070 .6871 8.245
33/64 .5156 .7099 8.519
17/32 .5312 .7538 9.046
9/16 .5625 .8449 10.139
.5680 .8615 10.338
19/32 .5937 .9416 11.299
5/8 .6250 1.043 12.516
.6310 1.060 12.720
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
Re-grind sizes
STAINLESS ROUNDSYarde Melt
303YM Optimum Free Machining Better Tool Life Consistency from Heat to Heat Improved Surface Finishes Complete Size Range 1 End Chamfered 45
ASTM A 582 AMS 5640 Color: Florescent Green
We stock companion inventory of all Commercial Grades.
203
21/32 .6562 1.150 13.80
11/16 .6875 1.262 15.14
.6930 1.282 15.38
23/32 .7187 1.381 16.57
3/4 .7500 1.502 18.02
.7560 1.528 18.34
13/16 .8125 1.763 21.16
27/32 .8437 1.901 22.81
7/8 .8750 2.045 24.54
.8810 2.068 24.81
29/32 .9062 2.193 26.31
15/16 .9375 2.347 28.16
31/32 .9687 2.506 30.07
1 1.000 2.670 32.04
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
Re-grind sizesWe stock companion inventory of all Commercial Grades.
STAINLESS ROUNDSYarde Melt
303YM Optimum Free Machining Better Tool Life Consistency from Heat to Heat Improved Surface Finishes Complete Size Range 1 End Chamfered 45
ASTM A 582 AMS 5640 Color: Florescent Green
204
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
1.007 2.697 32.36
1 1/16 1.063 3.015 36.18
1 1/8 1.125 3.380 40.56
1.130 3.409 40.90
1 3/16 1.188 3.766 45.19
1 1/4 1.250 4.173 50.08
1.256 4.216 50.59
1 5/16 1.313 4.600 55.20
1 3/8 1.375 5.049 60.59
1 7/16 1.438 5.518 66.22
1 1/2 1.500 6.008 72.10
1.507 6.048 72.58
1 9/16 1.563 6.520 78.24
1 5/8 1.625 7.052 84.62
1 11/16 1.688 7.604 91.25
1 3/4 1.750 8.178 98.14
1 13/16 1.813 8.773 105.27
1 7/8 1.875 9.388 112.66
1 15/16 1.938 10.020 120.25
2 2.000 10.68 128.2
2.006 10.98 131.8
STAINLESS ROUNDSYarde Melt
303YM Optimum Free Machining Better Tool Life Consistency from Heat to Heat
Improved Surface Finishes Complete Size Range
ASTM A 582 AMS 5640 Color: Florescent Green
Re-grind sizeWe stock companion inventory of all Commercial Grades.
205
2 1/16 2.063 11.36 136.3
2 1/8 2.125 12.06 144.7
2 3/16 2.187 12.78 153.4
2 1/4 2.250 13.52 162.2
2 5/16 2.313 14.27 171.2
2 3/8 2.375 15.06 180.7
2 1/2 2.500 16.69 200.3
2 5/8 2.625 18.40 220.8
2 3/4 2.750 20.19 242.3
2 7/8 2.875 22.07 264.8
2 1/2 2.500 16.69 200.3
2 5/8 2.625 18.40 220.8
2 3/4 2.750 20.19 242.3
3 3.000 24.03 288.4
3 1/8 3.125 26.08 313.0
3 1/4 3.250 28.21 338.5
3 3/8 3.375 30.42 365.0
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STAINLESS ROUNDSYarde Melt
303YM Optimum Free Machining Better Tool Life Consistency from Heat to Heat
Improved Surface Finishes Complete Size Range
ASTM A 582 AMS 5640 Color: Florescent Green
We stock companion inventory of all Commercial Grades.
206
3 1/2 3.500 32.71 392.5
3 5/8 3.625 35.09 421.1
3 3/4 3.750 37.55 450.6
3 7/8 3.875 40.10 481.2
4 4.000 42.73 512.8
4 1/4 4.250 48.23 578.8
4 1/2 4.500 54.08 649.0
4 3/4 4.750 60.25 723.0
5 5.000 66.76 801.1
5 1/4 5.250 73.60 883.2
5 1/2 5.500 80.78 969.4
5 3/4 5.750 88.37 1060.0
6 6.000 96.1 1154
6 1/4 6.250 104.3 1252
6 1/2 6.500 112.8 1354
6 3/4 6.750 121.7 1460
7 7.000 130.8 1570
7 1/4 7.250 140.4 1685
7 1/2 7.500 150.2 1802
8 8.000 170.9 2051
8 1/2 8.500 192.9 2315
9 9.00 216.3 2596
10 10.00 267.0 3204
11 11.00 323.1 3877
12 12.00 384.5 4614
13 13.00 451.2 5415
14 14.00 523.3 6280
16 16.00 683.52 8202
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STAINLESS ROUNDS
303ASTM A 582 AMS 5640
Color: Red
207
STAINLESS ROUNDSYarde Melt
303YM
PRECISION GROUND 1 End Chamfered 45 1 End Pointed 30 Micro Finish 24 Max
Both Ends Chamfered Upon Size Availability
tolerance plus .0000 minus .0005ASTM A 582 AMS 5640
Color: Florescent Green
Decimal Size in Lbs. Est. lbs.Size inches per ft. 12' bar
.1245/.1250 1/8 .0420 .504
.1557/.1562 5/32 .0650 .780
.1870/.1875 3/16 .0930 1.116
.2182/.2187 7/32 .1277 1.532
.2495/.2500 1/4 .1670 2.004
.2807/.2812 9/32 .2111 2.533
.3120/.3125 5/16 .2610 3.132
.3745/.3750 3/8 .3760 4.512
.4370/.4375 7/16 .5111 6.133
.4995/.5000 1/2 .6680 8.016
.5620/.5625 9/16 .8450 10.14
.6245/.6250 5/8 1.050 12.60
.7495/.7500 3/4 1.510 18.12
.8745/.8750 7/8 2.050 24.60
.9995/1.000 1 2.670 32.04
1.1245/1.125 1 1/8 3.379 40.55
1.2495/1.250 1 1/4 4.173 50.08
1.4995/1.500 1 1/2 6.008 72.10
1.9995/2.000 2 10.680 128.16CENTERLESS GRINDING - is availalbe to fit specified applications with near perfectroundness. Polishing is also available with surfaces to 8RMS. Specs for most special and metric sizes are available.
208
STAINLESS ROUNDSYarde Melt
304/304L YMOptimum Free Machining Better Tool Life Consistency from Heat to Heat
Improved Surface Finishes Complete Size Range
ASTM A 276/479 AMS 5639 AMS 5647 QQ S 763Color: Brown & White
3/32 .0937 .0235 .282
1/8 .1250 .0417 .500
.1310 .0458 .550
5/32 .1562 .0650 .782
3/16 .1875 .0940 1.127
.1925 .0989 1.187
1/4 .2500 .1669 2.003
.2560 .1750 2.100
9/32 .2812 .2113 2.536
5/16 .3125 .2608 3.130
.3175 .2692 3.230
3/8 .3750 .3755 4.506
.3810 .3875 4.650
7/16 .4375 .5111 6.133
1/2 .5000 .6676 8.011
.5070 .6863 8.236
9/16 .5625 .8449 10.14
5/8 .6250 1.043 12.52
.6310 1.063 12.75
11/16 .6875 1.262 15.14
3/4 .7500 1.502 18.02
.7560 1.526 18.31
13/16 .8125 1.763 21.16
7/8 .8750 2.045 24.54
.8810 2.072 24.46
15/16 .9375 2.347 28.16
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
Re-grind sizes
209
1 1.000 2.670 32.04
1.007 2.707 32.48
1 1/8 1.125 3.380 40.56
1 3/16 1.188 3.766 45.19
1 1/4 1.250 4.173 50.08
1.256 4.212 50.54
1 5/16 1.313 4.600 55.20
1 3/8 1.375 5.049 60.59
1 1/2 1.500 6.008 72.10
1.506 6.055 72.66
1 9/16 1.563 6.520 78.24
1 5/8 1.625 7.052 84.60
1 3/4 1.750 8.178 98.10
1 7/8 1.875 9.388 112.70
1 15/16 1.938 10.030 120.40
2 2.000 10.68 128.2
2.007 10.75 129.0
2 1/8 2.125 12.05 144.7
2 1/4 2.250 13.52 162.2
2 3/8 2.375 15.06 180.7
2 1/2 2.500 16.69 200.3
2 5/8 2.625 18.40 220.8
2 3/4 2.750 20.19 242.3
3 3.000 24.03 288.4
3 1/8 3.125 26.08 313.0
3 1/4 3.250 28.21 338.5
3 3/8 3.375 30.42 365.0
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STAINLESS ROUNDSYarde Melt
304/304L YM Optimum Free Machining Better Tool Life Consistency from Heat to Heat
Improved Surface Finishes Complete Size Range
ASTM A 276/479 AMS 5639 AMS 5647 QQ S 763Color: Brown & White
Re-grind sizes
210
3 1/2 3.500 32.71 392.5
3 3/4 3.750 37.55 450.6
4 4.000 42.73 512.8
4 1/4 4.250 48.23 578.8
4 1/2 4.500 54.08 649.0
4 3/4 4.750 60.25 723.0
5 5.000 66.76 801.1
5 1/4 5.250 73.60 883.2
5 1/2 5.500 80.78 969.4
5 3/4 5.750 88.29 1059.0
6 6.000 96.1 1153.0
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STAINLESS ROUNDSDual Certified
304LASTM A 276/479 AMS 5639 AMS 5647 QQ S 763
Color: Pink & Brown
CTB - Carbide Tipped Band saw provides superior squareness of cut, excellent surface finish and close
tolerances during high volume production cutting.
211
6 1/4 6.250 104.3 1251
6 1/2 6.500 112.8 1354
6 3/4 6.750 121.7 1460
7 7.000 130.8 1570
7 1/4 7.250 140.4 1685
7 1/2 7.500 150.2 1802
7 3/4 7.750 160.4 1925
8 8.00 170.9 2051
8 1/2 8.50 192.9 2315
8 3/4 8.75 204.5 2454
9 9.00 216.3 2596
9 1/2 9.50 241.0 2892
10 10.00 267.0 3204
10 1/2 10.50 289.1 3469
11 11.00 321.3 3855
11 1/4 11.25 337.9 4055
12 12.00 384.5 4619
12 1/2 12.50 417.2 5006
13 13.00 451.7 5421
14 14.00 523.9 6287
14 1/2 14.50 561.9 6743
15 15.00 607.4 7289
16 16.00 691.1 8293
18 18.00 865.0 10,380
20 20.00 1068.0 12,816
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STAINLESS ROUNDS304L
Dual Certified
ASTM A 276/479 AMS 5639 AMS 5647 QQ S 763Color: Pink & Brown
212
STAINLESS ROUNDSYarde Melt
304/304L YM
PRECISION GROUND 1 End Chamfered 45 1 End Pointed 30 Micro Finish 24 Max
Both Ends Chamfered Upon Size Availability
tolerance plus .0000 minus .0005ASTM A 276/479 AMS 5639 AMS 5647 QQ S 763
Decimal Size in Lbs. Est. lbs.Size inches per ft. 12' bar
.1245/.1250 1/8 .0420 .504
.1557/.1562 5/32 .0650 .780
.1870/.1875 3/16 .0930 1.116
.2182/.2187 7/32 .1277 1.532
.2495/.2500 1/4 .1670 2.004
.2807/.2812 9/32 .2111 2.533
.3120/.3125 5/16 .2610 3.132
.3745/.3750 3/8 .3760 4.512
.4370/.4375 7/16 .5111 6.133
.4995/.5000 1/2 .6680 8.016
.5620/.5625 9/16 .8450 10.14
.6245/.6250 5/8 1.050 12.60
.7495/.7500 3/4 1.510 18.12
.8745/.8750 7/8 2.050 24.60
.9995/1.000 1 2.670 32.04
1.2495/1.250 1 1/4 4.173 50.08
1.4955/1.500 1 1/2 6.008 72.10
1.9995/2.000 2 10.68 128.16
CENTERLESS GRINDING - is available to fit specified applications with near perfectroundness. Polishing is also available with surfaces to 8RMS. Specs for most special and metric sizes are available.
213
1/8 .1250 .0417 .500
.1310 .0458 .550
5/32 .1562 .0650 .780
3/16 .1875 .0939 1.127
.1925 .0989 1.187
1/4 .2500 .1669 2.003
.2560 .1750 2.100
5/16 .3125 .2608 3.130
.3175 .2692 4.458
3/8 .3750 .3755 4.506
.3810 .3876 4.651
7/16 .4375 .5111 6.133
1/2 .5000 .6676 8.011
.5070 .6863 8.236
9/16 .5625 .8449 10.14
5/8 .6250 1.043 12.52
.6310 1.063 12.76
11/16 .6875 1.262 15.14
3/4 .7500 1.502 18.02
.7560 1.526 18.31
13/16 .8125 1.763 21.16
7/8 .8750 2.045 24.54
.8810 2.072 24.87
15/16 .9375 2.347 28.16
1 1.000 2.670 32.04
1.007 2.706 32.47
1 1/8 1.125 3.379 40.54
1 3/16 1.188 3.766 45.19
1 1/4 1.250 4.173 50.08
1.256 4.212 50.54
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STAINLESS ROUNDSYarde Melt
316/316L YM
Optimum Free Machining Better Tool Life Consistency from Heat to Heat Improved Surface Finishes Complete Size Range
ASTM A 276/479 AMS 5648 AMS 5653 QQ S 763Color: Blue & White
Re-grind sizes.
214
1 5/16 1.313 4.600 55.20
1 3/8 1.375 5.049 60.59
1 1/2 1.500 6.008 72.10
1.506 6.056 72.67
1 9/16 1.562 6.520 78.24
1 5/8 1.625 7.051 84.61
1 3/4 1.750 8.178 98.13
1 7/8 1.875 9.388 112.7
2 2.000 10.68 128.2
2.007 10.75 129.0
2 1/8 2.125 12.05 144.7
2 1/4 2.250 13.52 162.2
2 3/8 2.375 15.06 180.7
2 1/2 2.500 16.70 200.4
2 5/8 2.625 18.40 220.8
2 3/4 2.750 20.20 242.4
2 7/8 2.875 22.06 264.8
3 3.000 24.03 288.4
3 1/8 3.125 26.08 313.0
3 1/4 3.250 28.21 338.5
3 3/8 3.375 30.42 365.0
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STAINLESS ROUNDSYarde Melt
316/316L YM
Optimum Free Machining Better Tool Life Consistency from Heat to Heat Improved Surface Finishes Complete Size Range
ASTM A 276/479 AMS 5648 AMS 5653 QQ S 763Color: Blue & White
Re-grind sizes.
CM-100: Carbide Tipped circular saw produces the closest commercial tolerances, squareness of cut & surface finishes available.
STAINLESS ROUNDSDual Certified
316LASTM A 276/479 AMS 5648 AMS 5653 QQ S 763
Color: Purple & Blue
215
3 1/2 3.500 32.71 392.5
3 5/8 3.625 35.09 421.1
3 3/4 3.750 37.55 450.6
3 7/8 3.875 40.10 481.2
4 4.000 42.72 512.6
4 1/4 4.250 48.23 578.8
4 1/2 4.500 54.08 649.0
4 5/8 4.625 57.11 686.4
4 3/4 4.750 60.25 723.0
5 5.000 66.76 801.1
5 1/4 5.250 73.60 883.2
5 1/2 5.500 80.78 969.4
5 3/4 5.750 88.29 1059.0
6 6.000 96.12 1153
6 1/4 6.25 104.3 1252
6 1/2 6.50 112.8 1357
6 3/4 6.75 121.7 1460
7 7.00 130.9 1570
7 1/4 7.25 140.4 1685
7 1/2 7.50 150.2 1802
7 3/4 7.75 160.4 1929
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
216
8 8.00 170.9 2051
8 1/4 8.25 181.7 2181
8 1/2 8.50 192.9 2315
8 3/4 8.75 204.4 2453
9 9.00 216.3 2596
9 1/2 9.50 241.0 2892
10 10.00 267.0 3204
10 1/2 10.50 294.4 3533
11 11.00 321.3 3856
12 12.00 384.5 4614
12 1/2 12.50 417.2 5006
13 13.00 451.2 5414
13 1/2 13.50 486.6 5839
14 14.00 523.3 6279
14 1/2 14.50 571.2 6854
15 15.00 600.8 7209
16 16.00 683.5 8202
18 18.00 865.1 10,381
20 20.00 1068.0 12,816
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STAINLESS ROUNDSDual Certified
316LASTM A 276/479 AMS 5648 AMS 5653 QQ S 763
Color: Purple & Blue
217
STAINLESS ROUNDSYarde Melt
316/316LYM
PRECISION GROUND 1 End Chamfered 45 1 End Pointed 30 Micro Finish 24 Max
Both Ends Chamfered Upon Size Availability
tolerance plus .0000 minus .0005ASTM A 276/479 AMS 5648 AMS 5653 QQ S 763
Decimal Size in Lbs. Est. lbs.Size inches per ft. 12' bar
.1245/.1250 1/8 .0420 .504
.1557/.1562 5/32 .0650 .780
.1870/.1875 3/16 .0930 1.116
.2182/.2187 7/32 .1277 1.532
.2495/.2500 1/4 .1670 2.004
.2807/.2812 9/32 .2111 2.533
.3120/.3125 5/16 .2610 3.132
.3745/.3750 3/8 .3760 4.512
.4370/.4375 7/16 .5111 6.133
.4995/.5000 1/2 .6680 8.016
.5620/.5625 9/16 .8450 10.14
.6245/.6250 5/8 1.050 12.60
.7495/.7500 3/4 1.510 18.12
.8745/.8750 7/8 2.050 24.60
.9995/1.000 1 2.670 32.04
1.2495/1.250 1 1/4 4.173 50.08
1.4995/1.500 1 1/2 6.008 72.10
1.9995/2.000 2 10.68 128.16
CENTERLESS GRINDING - is available to fit specified applications with near perfectroundness. Polishing is also available with surfaces to 8RMS. Specs for most special and metric sizes are available.
218
STAINLESS ROUNDS
321 347ASTM A 276/479 ASTM A 276/479
AMS 5645 QQ S 763 AMS 5646 QQ S 763 Black - Color - White
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
1/4 .2500 .1669 2.003
5/16 .3125 .2608 3.130
3/8 .3750 .3755 4.506
7/16 .4375 .5111 6.133
1/2 .5000 .6676 8.011
9/16 .5625 .8449 10.14
5/8 .6250 1.043 12.52
11/16 .6875 1.262 15.14
3/4 .7500 1.502 18.02
13/16 .8125 1.763 21.16
7/8 .8750 2.045 24.54
15/16 .9375 2.347 28.16
1 1.000 2.670 32.04
1 1/8 1.125 3.380 40.56
1 1/4 1.250 4.173 50.08
1 5/16 1.313 4.600 55.20
1 3/8 1.375 5.049 60.59
1 7/16 1.438 5.518 66.22
1 1/2 1.500 6.008 72.10*Ask about LCS, GE S 400 and GE S 1000
219
STAINLESS ROUNDS
321 347ASTM A 276/479 ASTM A 276/479
AMS 5645 QQ S 763 AMS 5646 QQ S 763 Black - Color - White
Size in Decimal Lbs. Est. lbs.
1 9/16 1.563 6.520 78.24
1 5/8 1.625 7.052 84.62
1 3/4 1.750 8.178 98.14
1 7/8 1.875 9.388 112.80
2 2.000 10.79 129.5
2 1/4 2.250 13.67 164.0
2 1/2 2.500 16.87 202.4
2 3/4 2.750 20.42 245.0
3 3.000 24.03 288.4
3 1/4 3.250 28.51 342.1
3 1/2 3.500 33.07 369.8
3 3/4 3.750 37.96 455.5
4 4.000 43.19 518.2
4 1/4 4.250 48.76 585.1
4 1/2 4.500 54.66 655.9
4 3/4 4.750 60.91 730.9*Ask about LCS, GE S 400 and GE S 1000
220
STAINLESS ROUNDS
321 347ASTM A 276/479 ASTM A 276/479
AMS 5645 QQ S 763 AMS 5646 QQ S 763 Black - Color - White
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
5 5.00 67.49 809.8
5 1/4 5.25 74.40 892.8
5 1/2 5.50 81.66 979.9
5 3/4 5.75 89.25 1071.0
6 6.00 97.18 1166
6 1/2 6.50 114.0 1368
7 7.00 132.3 1587
7 1/2 7.50 151.9 1822
8 8.00 172.8 2074
8 1/2 8.50 195.0 2340
9 9.00 218.7 2624
10 10.00 269.9 3238
*Ask about LCS, GE S 400 and GE S 1000
221
1/8 .1250 .0417 .500
.1310 .0458 .549
5/32 .1562 .0652 .782
3/16 .1875 .0939 1.127
.1925 .0993 1.192
7/32 .2187 .1278 1.534
15/64 .2343 .1470 1.764
1/4 .2500 .1669 2.003
.2560 .1750 2.100
17/64 .2650 .1877 2.252
9/32 .2812 .2113 2.536
5/16 .3125 .2608 3.130
.3175 .2685 3.222
11/32 .3437 .3156 3.787
3/8 .3750 .3755 4.506
.3810 .3856 4.627
13/32 .4062 .4408 5.290
7/16 .4375 .5111 6.133
1/2 .5000 .6676 8.011
.5070 .6837 8.024
17/32 .5312 .7538 9.05
9/16 .5625 .8449 10.14
19/32 .5937 .9416 11.30
5/8 .6250 1.043 12.52
.6310 1.063 12.75
STAINLESS ROUNDS
416 ASTM A 582 AMS 5610 QQ S 764
Color: GreenSize in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
Re-grind sizes
222
11/16 .6875 1.262 15.14
3/4 .7500 1.502 18.02
.7560 1.528 18.26
13/16 .8125 1.763 21.16
7/8 .8750 2.045 24.54
15/16 .9375 2.347 28.16
1 1.000 2.670 32.04
1.007 2.710 32.53
1 1/16 1.063 3.015 36.18
1 1/8 1.125 3.380 40.56
1 3/16 1.188 3.766 45.19
1 1/4 1.250 4.173 50.08
1 5/16 1.313 4.600 55.20
1 3/8 1.375 5.049 60.59
1 1/2 1.500 6.008 72.10
1 9/16 1.563 6.520 78.24
1 5/8 1.625 7.052 84.62
1 3/4 1.750 8.178 98.14
1 7/8 1.875 9.388 112.70 Re-grind sizes.
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STAINLESS ROUNDS
416 ASTM A 582 AMS 5610 QQ S 764
Color: Green
223
2 2.000 10.68 128.2
2 1/8 2.125 12.06 144.7
2 1/4 2.250 13.52 162.2
2 3/8 2.375 15.06 180.7
2 1/2 2.500 16.69 200.3
2 5/8 2.625 18.40 220.8
2 3/4 2.750 20.19 242.3
3 3.000 24.03 288.4
3 1/4 3.250 28.21 338.5
3 1/2 3.500 32.71 392.5
3 3/4 3.750 37.55 450.6
4 4.000 42.73 512.8
4 1/4 4.250 48.23 578.8
4 1/2 4.500 54.08 649.0
4 3/4 4.750 60.25 723.0
5 5.000 66.76 801.1
5 1/4 5.250 73.60 883.2
5 1/2 5.500 80.78 969.4
5 3/4 5.750 88.37 1060.0
6 6.000 96.1 1154
6 1/4 6.250 104.3 1251
6 1/2 6.500 112.8 1354
6 3/4 6.750 121.7 1460
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STAINLESS ROUNDS
416 ASTM A 582 AMS 5610 QQ S 764
Color: Green
224
7 7.00 130.9 1571
7 1/4 7.25 140.4 1685
7 1/2 7.50 150.2 1802
7 3/4 7.75 160.4 1924
8 8.00 170.9 2051
8 1/2 8.50 192.9 2315
8 3/4 8.75 204.5 2454
9 9.00 216.3 2596
9 1/2 9.50 241.0 2892
10 10.00 267.0 3204
10 1/2 10.50 294.4 3533
12 12.00 384.5 4614
STAINLESS ROUNDS
416 ASTM A 582 AMS 5610 QQ S 764
Color: GreenSize in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
225
3/16 .1875 .0939 1.127
.1925 .0989 1.187
1/4 .2500 .1669 2.003
.2560 .1750 2.100
5/16 .3125 .2608 3.130
.3175 .2692 3.230
3/8 .3750 .3755 4.506
.3810 .3875 4.650
7/16 .4375 .5111 6.133
1/2 .5000 .6676 8.011
.5070 .6863 8.236
9/16 .5625 .8449 10.14
5/8 .6250 1.043 12.52
.6310 1.063 12.75
11/16 .6875 1.262 15.14
3/4 .7500 1.502 18.02
.7560 1.526 18.31
13/16 .8125 1.763 21.16
7/8 .8750 2.045 24.54
.8810 2.072 24.46
15/16 .9375 2.347 28.16
1 1.000 2.670 32.04
1.007 2.707 32.48
1 1/16 1.063 3.015 36.18
1 1/8 1.125 3.380 40.56
1 3/16 1.188 3.766 45.19
1 1/4 1.250 4.173 50.08
STAINLESS ROUNDS
416 HT Heat Treated to RC 26-32
ASTM A 582 AMS 5610 QQ S 764Color: Green & Red
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
226
1 3/8 1.375 5.049 60.59
1 1/2 1.500 6.008 72.10
1 5/8 1.625 7.052 84.62
1 3/4 1.750 8.178 94.14
1 7/8 1.875 9.388 112.70
2 2.000 10.68 128.2
2 1/8 2.125 12.06 144.7
2 1/4 2.250 13.52 162.0
2 1/2 2.500 16.69 200.3
2 3/4 2.750 20.19 242.3
3 3.000 24.03 288.4
3 1/4 3.250 28.21 338.5
3 1/2 3.500 32.71 392.5
3 3/4 3.750 37.55 450.6
4 4.000 42.73 512.8
4 1/4 4.250 48.23 578.8
4 1/2 4.500 54.08 649.0
4 3/4 4.750 60.25 723.0
5 5.000 66.76 801.1
5 1/4 5.250 73.60 883.2
5 1/2 5.500 80.78 969.4
6 6.000 96.10 1154
6 1/2 6.500 112.80 1354
7 7.000 130.90 1571
7 1/2 7.500 150.20 1802
8 8.000 170.90 2051
10 10.00 267.00 3204
12 12.00 384.48 4613
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STAINLESS ROUNDS
416 HT Heat Treated to RC 26-32
ASTM A 582 AMS 5610 QQ S 764Color: Green & Red
227
STAINLESS ROUNDS
416
PRECISION GROUND 1 End Chamfered 45 1 End Pointed 30 Micro Finish 24 Max
Both Ends Chamfered Upon Size Availability
tolerance plus .0000 minus .0005ASTM A 582 AMS 5610 QQ S 764
Color: GreenDecimal Size in Lbs. Est. lbs.
Size inches per ft. 12' bar
.1245/.1250 1/8 .0420 .504
.1557/.1562 5/32 .0650 .780
.1870/.1875 3/16 .0930 1.116
.2182/.2187 7/32 .1277 1.532
.2495/.2500 1/4 .1670 2.004
.2807/.2812 9/32 .2111 2.533
.3120/.3125 5/16 .2610 3.132
.3745/.3750 3/8 .3760 4.512
.4370/.4375 7/16 .5111 6.133
.4995/.5000 1/2 .6680 8.016
.5620/.5625 9/16 .8450 10.14
.6245/.6250 5/8 1.050 12.60
.7495/.7500 3/4 1.510 18.12
.8745/.8750 7/8 2.050 24.60
.9995/1.000 1 2.670 32.04
1.2495/1.250 1 1/4 4.173 50.08
1.4995/1.500 1 1/2 6.008 72.10
1.9995/2.000 2 10.68 128.16
CENTERLESS GRINDING - is available to fit specified applications with near perfectroundness. Polishing is also available with surfaces to 8RMS. Specs for most special and metric sizes are available.
228
STAINLESS ROUNDS
410 420/420FASTM A 276/479 ASTM A 276
AMS 5612 ASTM A 484/582AMS 5613 AMS 5620/5621QQ S 763 QQ S 763
Green & Black - Color - Gray & Black/Fluor Green & Purple
1/4 .2500 .1669 2.003
5/16 .3125 .2608 3.130
3/8 .3750 .3755 4.506
7/16 .4375 .5111 6.133
1/2 .5000 .6676 8.011
9/16 .5625 .8449 10.14
5/8 .6250 1.043 12.52
11/16 .6875 1.262 15.14
3/4 .7500 1.502 18.02
13/16 .8125 1.763 21.16
7/8 .8750 2.045 24.54
15/16 .9375 2.347 28.16
1 1.000 2.670 32.04
1 1/8 1.125 3.417 41.00
1 3/16 1.188 3.766 45.19
1 1/4 1.250 4.173 50.08
1 5/16 1.313 4.600 55.20
1 3/8 1.375 5.049 60.59
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
Dual certified to 403/410 depending on size.
229
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
1 1/2 1.500 6.008 72.10
1 5/8 1.625 7.058 84.69
1 3/4 1.750 8.178 98.14
1 7/8 1.875 9.388 112.66
2 2.000 10.68 128.2
2 1/8 2.125 12.19 146.3
2 1/4 2.250 13.52 162.2
2 3/8 2.375 15.23 182.8
2 1/2 2.500 16.70 200.3
2 5/8 2.625 18.60 223.2
2 3/4 2.750 20.19 242.3
3 3.000 24.03 288.4
3 1/4 3.250 28.21 338.5
3 1/2 3.500 32.71 392.5
3 3/4 3.750 37.55 450.6
4 4.000 42.73 512.8
4 1/4 4.250 48.23 578.8
4 1/2 4.500 54.08 649.0
4 3/4 4.750 60.25 723.0
STAINLESS ROUNDS
410 420/420FASTM A 276/479 ASTM A 276
AMS 5612 ASTM A 484/582AMS 5613 AMS 5620/5621QQ S 763 QQ S 763
Green & Black - Color - Gray & Black/Fluor Green & Purple
Dual certified to 403/410 depending on size.
230
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
5 5.00 66.82 801.8
5 1/2 5.50 80.78 969.4
6 6.00 96.1 1154
6 1/2 6.50 112.8 1354
7 7.00 130.8 1570
7 1/2 7.50 150.2 1802
8 8.00 170.9 2051
8 1/2 8.50 192.9 2315
9 9.00 216.3 2596
10 10.00 267.0 3204
STAINLESS ROUNDS
410 420/420FASTM A 276/479 ASTM A 276
AMS 5612 ASTM A 484/582AMS 5613 AMS 5620/5621QQ S 763 QQ S 763
Green & Black - Color - Gray & Black/Fluor Green & Purple
Dual certified to 403/410 depending on size.
231
STAINLESS ROUNDS
430 430FASTM A 276/479 ASTM A 582
AMS 5627 QQ S 763White & Orange - Color -
1/4 .2500 .1669 2.003
3/8 .3750 .3755 4.506
1/2 .5000 .6676 8.011
9/16 .5625 .8450 10.14
5/8 .6250 1.043 12.52
3/4 .7500 1.502 18.02
7/8 .8750 2.045 24.54
1 1.000 2.670 32.04
1 1/8 1.125 3.417 41.00
1 3/16 1.188 3.766 45.19
1 1/4 1.250 4.173 50.08
1 5/16 1.313 4.600 55.20
1 3/8 1.375 5.049 60.59
1 1/2 1.500 6.008 72.10
1 5/8 1.625 7.058 84.69
1 3/4 1.750 8.178 98.14
1 7/8 1.875 9.388 112.7
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
430F Solenoid quality available.
232
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
2 2.000 10.68 128.2
2 1/4 2.250 13.52 162.2
2 1/2 2.500 16.70 200.3
2 3/4 2.750 20.19 242.3
3 3.000 24.03 288.4
3 1/4 3.250 28.21 338.5
3 1/2 3.500 32.71 392.5
4 4.000 42.73 512.8
4 1/4 4.250 48.23 578.8
4 1/2 4.500 54.08 649.0
5 5.000 66.82 801.8
5 1/2 5.500 81.66 979.9
6 6.000 97.19 1166.4430F Solenoid quality available.
STAINLESS ROUNDS
430 430FASTM A 276/479 ASTM A 582
AMS 5627 QQ S 763White & Orange - Color -
233
STAINLESS ROUNDS
440CASTM A 276 AMS 5630 QQ S 763
Color: Blue
1/8 .1250 .0417 .500
.1320 .0470 .564
3/16 .1875 .0939 1.127
.1925 .0989 1.187
1/4 .2500 .1671 2.005
.2580 .1777 2.132
5/16 .3125 .2610 3.132
.3175 .2692 3.230
3/8 .3750 .3750 4.510
.3810 .3876 4.651
7/16 .4375 .5116 6.139
.4444 .5624 6.317
1/2 .5000 .6682 8.011
.5070 .6863 8.236
9/16 .5625 .8457 10.15
5/8 .6250 1.044 12.53
.6310 1.063 12.76
11/16 .6875 1.263 15.16
3/4 .7500 1.504 18.04
.7580 1.534 18.41
7/8 .8750 2.046 24.56
.8810 2.072 24.87
1 1.000 2.673 32.07
1.007 2.708 32.49
1 1/8 1.125 3.383 40.59
1 1/4 1.250 4.176 50.12
1 3/8 1.375 5.053 60.64
1 1/2 1.500 6.014 72.17
1 5/8 1.625 7.058 84.70
1 3/4 1.750 8.186 98.23
2 2.000 10.69 128.3
2 1/4 2.250 13.53 162.4
2 1/2 2.500 16.71 200.5
2 5/8 2.625 18.42 221.0
2 3/4 2.750 20.21 242.6
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
Re-grind sizes.
234
3 3.00 24.03 288.4
3 1/4 3.25 28.23 338.8
3 1/2 3.50 32.74 392.9
3 3/4 3.75 37.59 451.0
4 4.00 42.77 513.2
4 1/2 4.50 54.13 649.5
5 5.00 66.82 801.9
5 1/2 5.50 80.86 970.2
6 6.00 96.22 1155
6 1/2 6.50 112.9 1355
7 7.00 131.0 1572
7 1/2 7.50 150.4 1804
8 8.00 171.1 2053
8 1/2 8.50 193.1 2137
9 9.00 216.5 2598
10 10.00 267.3 3207
12 12.00 384.9 4619
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STAINLESS ROUNDS
440CASTM A 276 AMS 5630 QQ S 763
Color: Blue
235
STAINLESS ROUNDS
440C
PRECISION GROUND 1 End Chamfered 45 1 End Pointed 30 Micro Finish 24 Max
Both Ends Chamfered Upon Size Availability
tolerance plus .0000 minus .0005ASTM A 276 AMS 5630 QQ S 763
Color: Blue Decimal Size in Lbs. Est. lbs.
Size inches per ft. 12' bar
.1245/.1250 1/8 .0420 .504
.1557/.1562 5/32 .0650 .780
.1870/.1875 3/16 .0930 1.116
.2182/.2187 7/32 .1277 1.532
.2495/.2500 1/4 .1670 2.004
.2807/.2812 9/32 .2111 2.533
.3120/.3125 5/16 .2610 3.132
.3745/.3750 3/8 .3760 4.512
.4370/.4375 7/16 .5111 6.133
.4995/.5000 1/2 .6680 8.016
.5620/.5625 9/16 .8450 10.14
.6245/.6250 5/8 1.050 12.60
.7495/.7500 3/4 1.510 18.12
.8745/.8750 7/8 2.050 24.60
.9995/1.000 1 2.670 32.04
1.2495/1.250 1 1/4 4.173 50.08
1.4995/1.500 1 1/2 6.008 72.10
1.9995/2.000 2 10.68 128.16
CENTERLESS GRINDING - is available to fit specified applications with near perfectroundness. Polishing is also available with surfaces to 8RMS. Specs for most special and metric sizes are available.
236
H 1100 1100 F (593 C) 4 Air
H 1075 1075 F (579 C) 4 Air
ConditionHardening
Temp+/- 25 F (+/- 14 C)
Hardening Time(Hours)
Type ofCooling
ConditionHardening
Temp+/- 15 F (+/- 9 C)
Hardening Time(Hours)
Type ofCooling
H 900 900 F (482 C) 1 Air
H 1025 1025 F (552 C) 4 Air
Condition A 1900 F (1038 C) 1/2 Hour Oil or Air Cool toBelow 90 F (32 C)
STAINLESS ROUNDS
17-4
Precipitation HardeningASTM A 564 Grade 630 AMS 5643
The "workhorse" of the precipitation hardening stainless steels.
Air MeltedAir-melted 17-4 Stainless Steel will meet the magnetic ParticleInspection requirements of AMS 2303. 17-4 Stainless Steel canbe machined in both solution-treated and precipitation-hardenedconditions.
Machining rates for 17-4 Stainless Steel in Condition A do not differ materially from those of Type 302. In the hardenedCondition H 900, this material should be machined at 60% of the rate 302. Surface finishes in either condition are excellent.
(Solution Treated) 17-4
HEAT TREATMENTS for 17-4
H 1150 1150 F (621 C) 4 Air
H 1150-M1400 F (760 C)
1150 F (621 C)
2Followed by
4
Air
Air
237
STAINLESS ROUNDSPrecipitation Hardening
17-4PHASTM A 564 Grade 630 AMS 5643
Color: Silver
3/32 .0937 .0234 .282
7/64 .1093 .0320 .384
1/8 .1250 .0417 .500
.1310 .0451 .541
3/16 .1875 .0939 1.127
.1925 .0989 1.187
7/32 .2187 .1278 1.534
1/4 .2500 .1669 2.003
.2560 .1777 2.132
9/32 .2812 .2113 2.536
5/16 .3125 .2608 3.130
.3175 .2692 3.230
3/8 .3750 .3755 4.506
.3810 .3876 4.651
7/16 .4375 .5111 6.133
.4444 .5264 6.317
1/2 .5000 .6676 8.011
.5070 .6863 8.236
9/16 .5625 .8449 10.14
5/8 .6250 1.043 12.52
.6310 1.063 12.76
11/16 .6875 1.262 15.14
3/4 .7500 1.502 18.02
.7560 1.534 18.41
13/16 .8125 1.763 21.16
7/8 .8750 2.045 24.54
.8810 2.072 24.87
15/16 .9375 2.347 28.16
1 1.000 2.670 32.04
1.007 2.708 32.49
1 1/16 1.063 3.020 36.24
1 1/8 1.125 3.380 40.56
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
17-4 also stocked as Cond H-1150 and H-1075. Other conditions available upon request. Re-grind sizes.
238
STAINLESS ROUNDSPrecipitation Hardening
17-4PHASTM A 564 Grade 630 AMS 5643
Color: Silver
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
1 3/16 1.188 3.766 45.19
1 1/4 1.250 4.173 50.08
1 5/16 1.313 4.600 55.20
1 3/8 1.375 5.049 60.59
1 1/2 1.500 6.008 72.10
1 9/16 1.563 6.520 78.24
1 5/8 1.625 7.058 84.69
1 3/4 1.750 8.178 98.14
1 7/8 1.875 9.388 112.70
2 2.000 10.68 128.2
2 1/8 2.125 12.07 144.8
2 1/4 2.250 13.52 162.2
2 3/8 2.375 15.07 180.8
2 1/2 2.500 16.70 200.3
2 5/8 2.625 18.84 226.1
2 3/4 2.750 20.19 242.3
2 7/8 2.875 22.07 264.8
3 3.000 24.03 288.4
3 1/8 3.125 26.10 313.2
3 1/4 3.250 28.21 338.5
3 3/8 3.375 30.42 365.0
3 1/2 3.500 32.71 392.5
3 5/8 3.625 35.09 421.1
3 3/4 3.750 37.55 450.6
4 4.000 42.73 512.817-4 also stocked as Cond H-1150 and H-1075. Other conditions available upon request.
239
STAINLESS ROUNDSPrecipitation Hardening
17-4PHASTM A 564 Grade 630 AMS 5643
Color: Silver
4 1/4 4.13 48.23 578.8
4 1/2 4.50 54.08 649.0
4 3/4 4.75 60.25 723.0
5 5.00 66.82 801.8
5 1/4 5.25 73.67 884.0
5 1/2 5.50 80.85 970.2
5 3/4 5.75 88.29 1059.5
6 6.00 96.22 1154
6 1/4 6.25 104.3 1252
6 1/2 6.50 112.8 1354
7 7.00 130.8 1570
7 1/4 7.25 140.3 1684
7 1/2 7.50 150.2 1802
8 8.00 170.9 2051
8 1/2 8.50 192.9 2315
9 9.00 216.3 2596
9 1/2 9.50 241.0 2892
10 10.00 267.0 3204
10 1/2 10.50 294.4 3532
11 11.00 321.3 3856
12 12.00 384.5 4614
13 13.00 451.2 5414
14 14.00 523.9 6287
15 15.00 601.0 7212
16 16.00 691.1 8293
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
17-4 also stocked as Cond H-1150 and H-1075. Other conditions available upon request.
240
STAINLESS ROUNDS
17-4PH
PRECISION GROUND 1 End Chamfered 45 1 End Pointed 30 Micro Finish 24 Max
Both Ends Chamfered Upon Size Availability
tolerance plus .0000 minus .0005ASTM A 564 AMS 5643 Grade 630
Color: Silver
Decimal Size in Lbs. Est. lbs.Size inches per ft. 12' bar
.1245/.1250 1/8 .0420 .504
.1557/.1562 5/32 .0650 .780
.1870/.1875 3/16 .0930 1.116
.2182/.2187 7/32 .1277 1.532
.2495/.2500 1/4 .1670 2.004
.2807/.2812 9/32 .2111 2.533
.3120/.3125 5/16 .2610 3.132
.3745/.3750 3/8 .3760 4.512
.4370/.4375 7/16 .5111 6.133
.4995/.5000 1/2 .6680 8.016
.5620/.5625 9/16 .8450 10.14
.6245/.6250 5/8 1.050 12.60
.7495/.7500 3/4 1.510 18.12
.8745/.8750 7/8 2.050 24.60
.9995/1.000 1 2.670 32.04
1.2495/1.250 1 1/4 4.173 50.08
1.4995/1.500 1 1/2 6.008 72.10
1.9995/2.000 2 10.68 128.16
CENTERLESS GRINDING - is available to fit specified applications with near perfectroundness. Polishing is also available with surfaces to 8RMS. Specs for most special and metric sizes are available.
17-4 also stocked as Cond H-1150 and H-1075. Other conditions available upon request.
241
1/4 .2500 .1669 2.003
5/16 .3125 .2608 3.130
3/8 .3750 .3755 4.506
1/2 .5000 .6676 8.011
9/16 .5625 .8449 10.14
5/8 .6250 1.043 12.52
11/16 .6875 1.262 15.14
3/4 .7500 1.502 18.02
7/8 .8750 2.045 24.54
15/16 .9375 2.349 28.18
1 1.000 2.670 32.04
1 1/8 1.125 3.390 40.68
1 3/16 1.188 3.760 45.12
1 1/4 1.250 4.173 50.08
1 7/16 1.438 5.518 66.21
1 1/2 1.500 6.008 72.10
1 5/8 1.625 7.051 84.61
1 3/4 1.750 8.178 98.14
1 7/8 1.875 9.388 112.66
2 2.000 10.68 128.2
2 1/8 2.125 12.07 144.8
2 1/4 2.250 13.53 162.4
2 3/8 2.375 15.42 185.0
2 1/2 2.500 16.70 200.3
2 5/8 2.625 18.40 220.8
2 3/4 2.750 20.19 242.3
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STAINLESS ROUNDSPrecipitation Hardening
15-5PH VM*ASTM A 564 Grade XM12
AMS 5659 Type 1 Color: Copper
*15-5 also available in other heat treated conditions upon request.**Vacuum Melt - see page 473 in Processing*** Some sizes available in ESR
242
STAINLESS ROUNDSPrecipitation Hardening
15-5PH VM*ASTM A 564 Grade XM12
AMS 5659 Type 1 Color: Copper
3 3.00 24.03 288.4
3 1/4 3.25 28.21 242.3
3 1/2 3.50 32.71 392.5
3 3/4 3.75 37.55 450.6
4 4.00 42.73 512.8
4 1/4 4.25 48.23 578.8
4 1/2 4.50 54.08 649.0
4 3/4 4.75 60.25 723.0
5 5.00 66.82 801.8
5 1/4 5.25 73.59 883.1
5 1/2 5.50 80.78 969.4
6 6.00 96.22 1154
6 1/2 6.50 112.8 1354
7 7.00 130.8 1570
7 1/2 7.50 150.2 1802
8 8.00 170.0 2052
8 1/2 8.50 192.9 2315
9 9.00 216.3 2596
9 1/2 9.50 241.0 2892
10 10.50 267.0 3204
11 11.00 323.1 3877
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
*15-5 also available in other heat treated conditions upon request.**Vacuum Melt - see page 473 in Processing***Some sizes available in ESR
243
1/8 .1250 .0460 .552
5/32 .1562 .0651 .782
3/16 .1875 .1035 1.242
1/4 .2500 .1840 2.208
5/16 .3125 .2875 3.450
3/8 .3750 .4141 4.969
7/16 .4375 .5636 6.763
1/2 .5000 .7368 8.841
9/16 .5625 .9316 11.18
5/8 .6250 1.150 13.80
11/16 .6875 1.392 16.70
3/4 .7500 1.656 19.87
13/16 .8125 1.944 23.33
7/8 .8750 2.254 27.05
15/16 .9375 2.588 31.06
1 1.000 2.944 35.33
1 1/16 1.062 3.324 39.89
1 1/8 1.125 3.727 44.72
1 1/4 1.250 4.601 55.21
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STAINLESS HEXAGONSAnnealed and Cold Drawn
303YM 303Yarde Melt
ASTM A 582 AMS 5640 ASTM A 582 AMS 5640 Florescent Green - Color - Red
244
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
1 5/16 1.313 5.072 60.86
1 3/8 1.375 5.567 66.80
1 1/2 1.500 6.625 79.50
1 5/8 1.625 7.775 93.30
1 3/4 1.750 9.017 108.20
1 7/8 1.875 10.350 124.21
2 2.000 11.78 141.40
2 1/4 2.250 14.91 178.90
2 1/2 2.500 18.40 220.80
3 3.000 26.50 318.00
STAINLESS HEXAGONSAnnealed and Cold Drawn
303YM 303Yarde Melt
ASTM A 582 AMS 5640 ASTM A 582 AMS 5640 Florescent Green - Color - Red
Optimum Machining characteristics yield more parts per man hour.
245
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
1/8 .1250 .0460 .552
3/16 .1875 .1035 1.242
1/4 .2500 .1840 2.208
5/16 .3125 .2875 3.450
3/8 .3750 .4141 4.969
7/16 .4375 .5636 6.763
1/2 .5000 .7361 8.833
9/16 .5625 .9316 11.180
5/8 .6250 1.150 13.800
11/16 .6875 1.392 16.700
3/4 .7500 1.656 19.870
13/16 .8125 1.944 23.330
7/8 .8750 2.254 27.050
15/16 .9375 2.588 31.060
1 1.000 2.944 35.330
1 1/16 1.062 3.324 39.890
1 1/8 1.125 3.727 44.720
1 1/4 1.250 4.601 55.210
1 5/16 1.313 5.072 60.860
1 3/8 1.375 5.567 66.80
1 1/2 1.500 6.625 79.50
1 5/8 1.625 7.775 93.30
1 3/4 1.750 9.017 108.20
1 7/8 1.875 10.350 124.21
2 2.000 11.78 141.4
2 1/4 2.250 14.91 178.9
2 1/2 2.500 18.40 220.8
3 3.000 26.50 318.0
STAINLESS HEXAGONSAnnealed and Cold Drawn
304Dual Certified
ASTM A 276/479 AMS 5639/5647 QQ S 763 Color: Pink
1/8 .1250 .0460 .552
3/16 .1875 .1035 1.242
1/4 .2500 .1840 2.208
5/16 .3125 .2875 3.450
3/8 .3750 .4141 4.969
7/16 .4375 .5636 6.763
1/2 .5000 .7361 8.833
9/16 .5625 .9316 11.180
5/8 .6250 1.150 13.800
11/16 .6875 1.392 16.700
3/4 .7500 1.656 19.870
13/16 .8125 1.944 23.330
7/8 .8750 2.254 27.050
15/16 .9375 2.588 31.060
1 1.000 2.944 35.330
1 1/16 1.062 3.324 39.890
1 1/8 1.125 3.727 44.720
1 1/4 1.250 4.601 55.210
246
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STAINLESS HEXAGONSAnnealed and Cold Drawn
316LDual Certified
ASTM A 276/479 AMS 5648/5653 QQ S 763 Color: Purple & Blue
247
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
1 5/16 1.313 5.072 60.86
1 3/8 1.375 5.567 66.80
1 1/2 1.500 6.625 79.50
1 5/8 1.625 7.775 93.30
1 3/4 1.750 9.017 108.20
1 7/8 1.875 10.350 124.21
2 2.000 11.78 141.40
2 1/8 2.125 13.43 161.10
2 1/4 2.250 14.91 178.90
2 1/2 2.500 18.40 220.80
2 3/4 2.750 22.48 269.80
3 3.000 26.50 318.00
STAINLESS HEXAGONSAnnealed and Cold Drawn
316LDual Certified
ASTM A 276/479 AMS 5648/5653 QQ S 763 Color: Purple & Blue
248
STAINLESS HEXAGONSAnnealed and Cold Drawn
321 347ASTM A 276/479 ASTM A 276/479
AMS 5645 QQ S 763 AMS 5646 QQ S 763 Black - Color - White
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
3/8 .3750 .3755 4.506
7/16 .4375 .5111 6.133
1/2 .5000 .6676 8.011
9/16 .5625 .8449 10.14
5/8 .6250 1.043 12.52
11/16 .6875 1.262 15.14
3/4 .7500 1.502 18.02
13/16 .8125 1.763 21.16
7/8 .8750 2.045 24.54
15/16 .9375 2.347 28.16
1 1.000 2.670 32.04
1 1/8 1.125 3.380 40.56
1 1/4 1.250 4.173 50.08
1 5/16 1.313 4.600 55.20
1 3/8 1.375 5.049 60.59
1 7/16 1.438 5.518 66.22
1 1/2 1.500 6.008 72.10
249
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STAINLESS HEXAGONSAnnealed and Cold Drawn
416ASTM A 582 AMS 5610
Hardenable to RC 40min
Color: Green
1/8 .1250 .0460 .552
3/16 .1875 .1035 1.242
1/4 .2500 .1840 2.208
5/16 .3125 .2875 3.450
3/8 .3750 .4141 4.969
7/16 .4375 .5636 6.763
1/2 .5000 .7361 8.833
9/16 .5625 .9316 11.180
5/8 .6250 1.150 13.800
11/16 .6875 1.392 16.700
3/4 .7500 1.656 19.870
13/16 .8125 1.944 23.330
7/8 .8750 2.254 27.050
15/16 .9375 2.588 31.060
1 1.000 2.944 35.330
1 1/16 1.062 3.324 39.890
1 1/8 1.125 3.727 44.720
1 1/4 1.250 4.601 55.210
1 5/16 1.313 5.072 60.860
1 3/8 1.375 5.567 66.80
1 1/2 1.500 6.625 79.50
1 5/8 1.625 7.775 93.30
1 3/4 1.750 9.017 108.20
1 7/8 1.875 10.350 124.21
2 2.000 11.78 141.4
2 1/4 2.250 14.91 178.9
2 1/2 2.500 18.40 220.8
3 3.000 26.50 318.0
250
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
3/8 .3750 .418 5.02
7/16 .4380 .570 6.84
1/2 .5000 .743 8.92
9/16 .5625 .941 11.29
5/8 .6250 1.150 13.80
11/16 .6875 1.407 16.89
3/4 .7500 1.656 19.87
7/8 .8750 2.254 27.05
1 1.000 2.944 35.33
1 1/4 1.250 4.601 55.21
1 1/2 1.500 6.689 80.27
STAINLESS HEXAGONS17-4PH
ASTM A 564 Grade 630 AMS 5643Color: Silver
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
1/4 .2500 .213 2.55
3/8 .3750 .478 5.74
1/2 .5000 .850 10.20
5/8 .6250 1.328 15.94
3/4 .7500 1.913 22.96
7/8 .8750 2.603 31.24
1 1.000 3.400 40.80
1 1/8 1.125 4.303 51.64
1 1/4 1.250 5.313 63.76
1 1/2 1.500 7.650 91.80
1 3/4 1.750 10.41 124.92
2 2.000 13.60 163.20
2 1/2 2.500 21.25 255.00
3 3.000 30.60 367.20
4 4.000 54.40 652.80
5 5.000 85.00 1020.00
6 6.000 122.40 1469.00
STAINLESS SQUARES17-4PH
ASTM A 564 Grade 630 AMS 5643Color: Silver
17-4 also stocked as Cond H-1150 and H-1075. Other conditions available upon request.
251
1/8 .1250 .0531 .637
3/16 .1875 .1195 1.434
1/4 .2500 .2125 2.550
5/16 .3125 .3320 3.984
3/8 .3750 .4781 5.737
7/16 .4375 .6508 7.810
1/2 .5000 .8500 10.20
9/16 .5625 1.076 12.91
5/8 .6250 1.328 15.94
3/4 .7500 1.913 22.96
7/8 .8750 2.603 31.24
1 1.000 3.400 40.80
1 1/8 1.125 4.303 51.64
1 1/4 1.250 5.313 63.76
1 1/2 1.500 7.650 91.80
1 3/4 1.750 10.41 124.93
2 2.000 13.60 163.20
2 1/2 2.500 21.27 255.20
* 3 3.000 30.63 367.60
* 3 1/2 3.500 41.69 500.30
* 4 4.000 54.45 653.40* Hot Rolled Annealed and Pickled
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STAINLESS SQUARESAnnealed and Cold Drawn
303YM 303Yarde Melt
ASTM A 582 ASTM A 582AMS 5640 AMS 5640
Florescent Green - Color - Red
252
1/8 .1250 .0531 .637
3/16 .1875 .1195 1.434
1/4 .2500 .2125 2.550
5/16 .3125 .3320 3.984
3/8 .3750 .4781 5.737
7/16 .4375 .6506 7.810
1/2 .5000 .8500 10.20
9/16 .5625 1.076 12.91
5/8 .6250 1.328 15.94
3/4 .7500 1.913 22.96
7/8 .8750 2.603 31.24
1 1.000 3.400 40.80
1 1/8 1.125 4.303 51.64
1 1/4 1.250 5.313 63.76
1 1/2 1.500 7.650 91.80
1 3/4 1.750 10.41 124.93
2 2.000 13.60 163.2
2 1/2 2.500 21.27 255.2
* 3 3.000 30.63 367.6
* 3 1/2 3.500 41.69 500.3
* 4 4.000 54.45 653.4
*Hot Rolled Annealed and Pickled
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STAINLESS SQUARESAnnealed and Cold Drawn
304Dual Certified
ASTM A 276/479 AMS 5639 QQ S 763 Color: Pink
253
1/8 .1250 .0531 .637
3/16 .1875 .1195 1.434
1/4 .2500 .2125 2.550
5/16 .3125 .3320 3.984
3/8 .3750 .4781 5.737
7/16 .4375 .6506 7.810
1/2 .5000 .8500 10.20
9/16 .5625 1.076 12.91
5/8 .6250 1.328 15.94
3/4 .7500 1.913 22.96
7/8 .8750 2.603 31.24
1 1.000 3.400 40.80
1 1/8 1.125 4.303 51.64
1 1/4 1.250 5.313 63.76
1 1/2 1.500 7.650 91.80
1 3/4 1.750 10.41 124.93
2 2.000 13.60 163.2
* 2 1/2 2.500 21.27 255.2
* 3 3.000 30.63 367.6
* 3 1/2 3.500 41.69 500.3
* 4 4.000 54.45 653.4
*Hot Rolled Annealed and Pickled
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STAINLESS SQUARESAnnealed and Cold Drawn
416ASTM A 582 AMS 5610 QQ S 763
Color: Green
254
1/8 x 1/2 .2127 2.552
5/8 .2659 3.191
3/4 .3191 3.829
1 .4254 5.105
1 1/4 .5317 6.381
1 1/2 .6381 7.657
2 .8500 10.20
3/16 x 3/8 .2393 2.871
1/2 .3191 3.829
3/4 .4786 5.743
1 .6381 7.657
1 1/4 .7976 9.572
1 1/2 .9572 11.49
1 3/4 1.117 13.40
2 1.276 15.31
2 1/2 1.595 19.14
3 1.914 22.97
4 2.552 30.88
Lbs. Est. lbs.THK Width per ft. 12' bar
Also available in Hot Rolled.
STAINLESS FLATSAnnealed and Cold Drawn
303ASTM A 582 AMS 5640
Color: Red
255
Lbs. Est. lbs.THK Width per ft. 12' bar
1/4 x 3/8 .3200 3.840
1/2 .4254 5.105
5/8 .5310 6.372
3/4 .6381 7.657
1 .8508 10.21
1 1/4 1.064 12.76
1 1/2 1.276 15.31
1 3/4 1.489 17.87
2 1.702 20.42
2 1/4 1.914 22.97
2 1/2 2.127 25.52
3 2.552 30.63
3 1/2 2.975 35.70
4 3.403 40.84
5 4.254 51.05
5/16 x 1/2 .532 6.38
3/4 .798 9.57
1 1.064 12.76
1 1/4 1.360 16.32
1 1/2 1.595 19.14
2 2.127 25.52
2 1/2 2.659 31.91
3 3.188 38.26
Also available in Hot Rolled.
STAINLESS FLATSAnnealed and Cold Drawn
303ASTM A 582 AMS 5640
Color: Red
256
3/8 x 1/2 .638 7.66
5/8 .798 9.57
3/4 .957 11.49
1 1.276 15.31
1 1/4 1.595 19.14
1 1/2 1.914 22.97
1 3/4 2.233 26.80
2 2.552 30.63
2 1/2 3.191 38.29
3 3.829 45.94
3 1/2 4.467 53.60
4 5.105 61.26
5 6.381 76.56
6 7.657 91.88
1/2 x 5/8 1.063 12.77
3/4 1.276 15.31
7/8 1.489 17.87
1 1.702 20.42
1 1/4 2.127 25.52
1 1/2 2.552 30.63
1 3/4 2.978 35.73
2 3.403 40.84
2 1/4 3.823 45.94
2 1/2 4.254 51.05
Lbs. Est. lbs.THK Width per ft. 12' bar
Also available in Hot Rolled.
STAINLESS FLATSAnnealed and Cold Drawn
303ASTM A 582 AMS 5640
Color: Red
257
Lbs. Est. lbs.THK Width per ft. 12' bar
1/2 x 3 5.105 61.26
3 1/2 5.956 71.47
4 6.806 81.68
4 1/2 7.657 91.89
5 8.508 102.10
6 10.210 122.50
5/8 x 3/4 1.595 19.14
7/8 1.861 22.33
1 2.127 25.52
1 1/4 2.659 31.90
1 1/2 3.191 38.29
1 3/4 3.722 44.66
2 4.254 51.05
2 1/2 5.318 63.81
3 6.381 76.57
4 8.508 102.10
5 10.630 127.60
6 12.750 153.00
Also available in Hot Rolled.
STAINLESS FLATSAnnealed and Cold Drawn
303ASTM A 582 AMS 5640
Color: Red
258
3/4 x 1 2.552 30.63
1 1/4 3.191 38.29
1 1/2 3.829 45.94
1 3/4 4.467 53.60
2 5.105 61.26
2 1/2 6.381 76.57
3 7.657 91.89
3 1/2 8.933 107.20
4 10.21 122.5
5 12.76 153.0
1 x 1 1/4 4.250 51.00
1 1/2 5.100 61.20
1 3/4 5.950 71.40
2 6.800 81.60
2 1/2 8.500 102.0
3 10.20 122.4
3 1/2 11.90 142.8
4 13.60 163.2
1 1/4 x 1 1/2 6.381 76.57
1 3/4 7.444 89.33
2 8.508 102.10
2 1/4 9.571 114.9
2 1/2 10.63 127.6
3 12.75 158.0
4 17.00 204.0Also available in Hot Rolled.
Lbs. Est. lbs.THK Width per ft. 12' bar
STAINLESS FLATSAnnealed and Cold Drawn
303ASTM A 582 AMS 5640
Color: Red
259
1 1/2 x 1 3/4 8.93 107.2
2 10.21 122.5
2 1/2 12.76 153.1
3 15.31 183.8
4 20.42 245.0
5 25.52 306.2
6 30.63 367.6
2 x 2 1/2 17.02 204.2
3 20.42 245.0
* 4 27.23 326.7
5 34.03 408.4
6 40.84 490.1
*2 1/2 x 3 25.52 306.3
4 34.03 408.4
*3 x 4 40.84 490.1
6 61.26 735.1*Hot Rolled only.
Lbs. Est. lbs.THK Width per ft. 12' bar
STAINLESS FLATSAnnealed and Cold Drawn
303ASTM A 582 AMS 5640
Color: Red
260
1/8 x 1/4 .1060 1.280
3/8 .1600 1.910
1/2 .2127 2.552
5/8 .2659 3.191
3/4 .3191 3.829
7/8 .3722 4.466
1 .4254 5.105
1 1/4 .5318 6.381
1 1/2 .6381 7.657
1 3/4 .7445 8.933
2 .8508 10.210
2 1/2 1.0640 12.769
3 1.2760 15.313
1/4 x 3/8 .3191 3.829
1/2 .4254 5.105
5/8 .5318 6.381
3/4 .6381 7.657
7/8 .7445 8.934
1 .8508 10.210
1 1/4 1.064 12.76
1 1/2 1.276 15.31
1 3/4 1.489 17.87
2 1.702 20.42
2 1/4 1.914 22.97
2 1/2 2.127 25.52
3 2.552 30.63
3 1/2 2.978 35.73
4 3.403 40.84
Lbs. Est. lbs.THK Width per ft. 12' bar
STAINLESS FLATSHot Rolled Annealed and Pickled
304 316 ASTM A 276/479 ASTM A 276/479
AMS 5639/5647 QQ S 763 AMS 5648/5653 QQ S 763 Pink - Color - Purple
“L” grades available.
261
5/16 x 1/2 .532 6.38
3/4 .798 9.57
1 1.064 12.76
1 1/4 1.329 15.95
1 1/2 1.595 19.14
1 3/4 1.861 22.33
2 2.127 25.52
2 1/4 2.393 28.71
2 1/2 2.659 31.91
3 3.191 38.29
4 4.254 51.05
3/8 x 1/2 .638 7.66
5/8 .798 9.57
3/4 .957 11.49
1 1.276 15.31
1 1/4 1.595 19.14
1 1/2 1.914 22.97
1 3/4 2.233 26.80
2 2.552 30.63
2 1/4 2.871 34.46
2 1/2 3.191 38.29
3 3.829 45.94
3 1/2 4.467 53.60
4 5.105 61.26
4 1/2 5.743 68.91
5 6.381 76.57
6 7.657 91.89
Lbs. Est. lbs.THK Width per ft. 12' bar
STAINLESS FLATSHot Rolled Annealed and Pickled
304 316 ASTM A 276/479 ASTM A 276/479
AMS 5639/5647 QQ S 763 AMS 5648/5653 QQ S 763 Pink - Color - Purple
“L” grades available.
262
Lbs. Est. lbs.THK Width per ft. 12' bar
1/2 x 3/4 1.276 15.31
7/8 1.489 17.87
1 1.702 20.42
1 1/4 2.127 25.52
1 1/2 2.552 30.63
1 3/4 2.978 35.73
2 3.403 40.84
2 1/2 4.254 51.05
3 5.105 61.26
3 1/2 5.956 71.47
4 6.806 81.68
4 1/2 7.657 91.89
5 8.508 102.10
6 10.210 122.53
5/8 x 3/4 1.595 19.14
1 2.127 25.52
1 1/4 2.659 31.91
1 1/2 3.191 38.29
1 3/4 3.722 44.67
2 4.254 51.05
2 1/4 4.786 57.43
2 1/2 5.318 63.81
3 6.381 76.57
3 1/2 7.445 89.33
4 8.508 102.10
5 10.640 127.69
6 12.760 153.13
STAINLESS FLATSHot Rolled Annealed and Pickled
304 316 ASTM A 276/479 ASTM A 276/479
AMS 5639/5647 QQ S 763 AMS 5648/5653 QQ S 763 Pink - Color - Purple
“L” grades available.
263
3/4 x 1 2.552 30.63
1 1/4 3.191 38.29
1 1/2 3.829 45.94
1 3/4 4.467 53.60
2 5.105 61.26
2 1/4 5.743 68.91
2 1/2 6.381 76.57
3 7.657 91.89
3 1/2 8.933 107.20
4 10.210 122.52
4 1/2 11.490 137.88
5 12.760 153.12
6 15.310 183.72
7/8 x 1 2.978 35.74
1 1/4 3.722 44.66
1 1/2 4.467 53.60
2 5.956 71.47
Lbs. Est. lbs.THK Width per ft. 12' bar
STAINLESS FLATSHot Rolled Annealed and Pickled
304 316 ASTM A 276/479 ASTM A 276/479
AMS 5639/5647 QQ S 763 AMS 5648/5653 QQ S 763 Pink - Color - Purple
“L” grades available.
Duplex Milled to close tolerance widths can save time and money.
264
Lbs. Est. lbs.THK Width per ft. 12' bar
STAINLESS FLATSHot Rolled Annealed and Pickled
304 316 ASTM A 276/479 ASTM A 276/479
AMS 5639/5647 QQ S 763 AMS 5648/5653 QQ S 763 Pink - Color - Purple
1 x 1 1/4 4.254 51.05
1 1/2 5.105 61.26
1 3/4 5.956 71.47
2 6.806 81.68
2 1/4 7.657 91.89
2 1/2 8.508 102.10
3 10.21 122.5
3 1/2 11.91 142.9
4 13.61 163.4
4 1/2 15.31 183.8
5 17.02 204.2
6 20.42 245.0
8 27.23 326.8
1 1/4 x 1 1/2 6.38 76.6
2 8.51 102.0
2 1/4 9.57 114.9
2 1/2 10.64 127.7
3 12.76 153.1
3 1/2 14.89 178.7
4 17.02 204.2
5 21.27 255.2
6 25.52 306.2
“L” grades available.
265
Lbs. Est. lbs.THK Width per ft. 12' bar
1 1/2 x 1 3/4 8.93 107.2
2 10.21 122.5
2 1/4 11.49 137.9
2 1/2 12.76 153.1
3 15.31 183.7
4 20.42 245.0
6 30.63 367.2
1 3/4 x 2 11.91 142.9
2 1/4 13.40 160.8
2 1/2 14.89 178.7
3 17.87 214.4
4 23.82 285.8
5 29.78 375.4
6 35.73 428.8
2 x 2 1/4 15.31 183.7
2 1/2 17.02 204.2
3 20.42 245.0
4 27.22 326.6
5 34.03 408.4
6 40.84 490.1
STAINLESS FLATSHot Rolled Annealed and Pickled
304 316 ASTM A 276/479 ASTM A 276/479
AMS 5639/5647 QQ S 763 AMS 5648/5653 QQ S 763 Pink - Color - Purple
Ask your sales consultant about saw cut plate to non-standard widths.
“L” grades available.
266
2 1/2 x 3 25.52 306.2
4 34.03 408.4
5 42.54 510.5
6 51.03 612.6
3 x 4 40.84 490.1
5 51.05 612.6
6 61.26 735.1
3 1/2 x 4 47.64 571.7
6 71.47 857.6
4 x 5 68.06 816.7
6 81.68 980.2
8 108.90 1307.0
Lbs. Est. lbs.THK Width per ft. 12' bar
STAINLESS FLATSHot Rolled Annealed and Pickled
304 316 ASTM A 276/479 ASTM A 276/479
AMS 5639/5647 QQ S 763 AMS 5648/5653 QQ S 763 Pink - Color - Purple
Consider band saw cutting tonon-standard dimensions.
“L” grades available.
267
1/8 x 1/2 .2127 2.552
3/4 .3191 3.829
7/8 .3722 4.466
1 .4254 5.105
1 1/4 .5318 6.381
1 1/2 .6381 7.657
1 3/4 .7445 8.933
2 .8508 10.210
2 1/2 1.0640 12.769
3 1.2760 15.313
3/16 x 1/2 .3190 3.829
3/4 .4786 5.743
1 .6381 7.657
1 1/4 .7976 9.572
1 1/2 .9572 11.487
1 3/4 .1117 13.401
2 1.2760 15.312
2 1/2 1.5950 19.142
3 1.9140 22.968
4 2.5500 30.600
5/16 x 3/4 .7980 9.570
1 1.0640 12.760
1 1/4 1.3290 15.950
1 1/2 1.5950 19.140
1 3/4 1.8610 22.330
2 2.1270 25.520
2 1/4 2.3930 28.710
3 3.1910 38.290
4 4.2540 51.050
Lbs. Est. lbs.THK Width per ft. 12' bar
STAINLESS FLATSSheared and Edged
304 316 ASTM A 240/480 ASTM A 240/480
Pink - Color - Purple
“L” grades available.Larger widths available upon request.
268
3/8 x 1/2 .638 7.66
3/4 .957 11.49
1 1.276 15.31
1 1/4 1.595 19.14
1 1/2 1.914 22.97
1 3/4 2.233 26.80
2 2.552 30.63
2 1/4 2.871 34.46
2 1/2 3.191 38.29
3 3.829 45.94
3 1/2 4.467 53.60
4 5.105 61.26
4 1/2 5.743 68.91
5 6.381 76.57
6 7.657 91.89
5/8 x 1/2 1.063 12.75
3/4 1.594 19.13
1 2.125 25.50
1 1/4 2.656 31.88
1 1/2 3.188 38.25
1 3/4 3.719 44.63
2 4.250 51.00
2 1/4 4.781 57.38
2 1/2 5.313 63.75
3 6.375 76.50
3 1/2 7.438 89.25
4 8.500 102.00
4 1/2 9.563 114.80
5 10.630 127.50
6 12.75 153.00
Lbs. Est. lbs.THK Width per ft. 12' bar
STAINLESS FLATSSheared and Edged
304 316 ASTM A 240/480 ASTM A 240/480
Pink - Color - Purple
“L” grades available.Larger widths available upon request.
269
3/4 x 1/2 1.275 15.30
3/4 1.913 22.95
1 2.550 30.60
1 1/4 3.188 38.25
1 1/2 3.825 45.90
1 3/4 4.462 53.54
2 5.100 61.20
2 1/4 5.738 68.85
2 1/2 6.375 76.50
3 7.650 91.80
3 1/2 8.925 107.10
4 10.200 122.40
4 1/2 11.480 137.76
5 12.750 153.00
6 15.300 183.60
1/2 x 3/4 1.276 15.31
1 1.702 20.42
1 1/4 2.127 25.52
1 1/2 2.550 30.60
1 3/4 2.978 35.73
2 3.403 40.84
2 1/4 3.820 45.60
2 1/2 4.254 51.05
3 5.105 61.26
3 1/2 5.956 71.47
4 6.806 81.68
4 1/2 7.650 91.80
5 8.508 102.10
6 10.210 122.53
Lbs. Est. lbs.THK Width per ft. 12' bar
STAINLESS FLATSSheared and Edged
304 316 ASTM A 240 ASTM A 240ASTM A 480 ASTM A 480
Pink - Color - Purple
“L” grades available.Larger widths available upon request.
270
1/8 x 3/4 .3191 3.829
1 .4254 5.105
1 1/2 .6381 7.657
2 .8508 10.210
3/16 x 1/2 .3191 3.829
3/4 .4786 5.743
1 .6381 7.657
1 1/4 .7976 9.572
1 1/2 .957 11.49
2 1/2 1.595 19.14
3 1.914 22.97
1/4 x 3/8 .3191 3.829
1/2 .4254 5.105
5/8 .5318 6.381
3/4 .6381 7.657
1 .8508 10.210
1 1/4 1.0640 12.760
1 1/2 1.2760 15.310
Lbs. Est. lbs.THK Width per ft. 12' bar
STAINLESS FLATSHot Rolled Annealed and Pickled
17-4PHASTM A 564 Grade 630 AMS 5643
Color: Silver
17-4 also stocked as Cond H-1150 and H-1075. Other conditions available upon request.
271
1/4 x 1 3/4 1.489 17.87
2 1.702 20.42
2 1/2 2.127 25.52
3 2.552 30.63
4 3.403 40.84
5 4.254 51.05
6 5.105 61.26
5/16 x 3/4 .798 9.57
1 1.064 12.76
1 1/4 1.329 15.95
1 1/2 1.595 19.14
2 2.127 25.52
2 1/2 2.659 31.91
3 3.191 38.29
3/8 x 1/2 .638 7.65
3/4 .957 11.49
1 1.276 15.31
1 1/4 1.595 19.14
1 1/2 1.914 22.97
1 3/4 2.233 26.80
Lbs. Est. lbs.THK Width per ft. 12' bar
STAINLESS FLATSHot Rolled Annealed and Pickled
17-4PHASTM A 564 Grade 630 AMS 5643
Color: Silver
17-4 also stocked as Cond H-1150 and H-1075. Other conditions available upon request.
272
Lbs. Est. lbs.THK Width per ft. 12' bar
STAINLESS FLATSHot Rolled Annealed and Pickled
17-4PHASTM A 564 Grade 630 AMS 5643
Color: Silver
3/8 x 2 2.552 30.63
2 1/2 3.191 38.29
3 3.829 45.94
3 1/2 4.467 53.60
4 5.105 61.26
5 6.381 76.57
6 7.657 91.89
1/2 x 5/8 1.064 12.77
3/4 1.276 15.31
1 1.702 20.42
1 1/4 2.127 25.52
1 1/2 2.552 30.63
1 3/4 2.978 35.73
2 3.403 40.84
2 1/2 4.254 51.05
3 5.105 61.26
3 1/2 5.956 71.47
4 6.806 81.68
4 1/2 7.657 91.89
5 8.508 102.10
6 10.210 122.56
17-4 also stocked as Cond H-1150 and H-1075. Other conditions available upon request.
273
5/8 x 3/4 1.595 19.14
1 2.127 25.52
1 1/4 2.659 31.91
1 1/2 3.191 38.29
1 3/4 3.722 44.67
2 4.254 51.05
2 1/2 6.381 76.57
3 7.657 91.89
4 10.21 122.5
5 12.76 153.1
6 15.31 183.8
3/4 x 1 2.552 30.63
1 1/4 3.191 38.29
1 1/2 3.829 45.94
1 3/4 4.467 53.60
2 4.254 51.05
2 1/4 5.738 68.85
2 1/2 6.381 76.57
3 7.657 91.89
3 1/2 8.933 107.20
4 10.21 122.5
5 12.76 153.1
6 15.31 183.8
8 20.42 245.0
Lbs. Est. lbs.THK Width per ft. 12' bar
STAINLESS FLATSHot Rolled Annealed and Pickled
17-4PHASTM A 564 Grade 630 AMS 5643
Color: Silver
17-4 also stocked as Cond H-1150 and H-1075. Other conditions available upon request.
274
Lbs. Est. lbs.THK Width per ft. 12' bar
7/8 x 2 5.956 71.47
3 8.933 107.20
1 x 1 1/4 4.254 51.05
1 1/2 5.105 61.26
1 3/4 9.956 71.47
2 6.806 81.68
2 1/4 7.657 91.89
2 1/2 8.508 102.10
3 10.21 122.5
3 1/2 11.91 142.9
4 13.61 163.4
4 1/2 15.31 183.8
5 17.02 204.2
6 20.42 245.0
7 23.82 285.8
8 27.23 326.7
1 1/4 x 1 1/2 6.381 76.57
1 3/4 7.445 89.34
2 8.508 102.10
2 1/2 10.64 127.6
3 12.76 153.1
3 1/2 14.89 178.7
STAINLESS FLATSHot Rolled Annealed and Pickled
17-4PHASTM A 564 Grade 630 AMS 5643
Color: Silver
17-4 also stocked as Cond H-1150 and H-1075. Other conditions available upon request.
275
Lbs. Est. lbs.THK Width per ft. 12' bar
1 1/4 x 4 17.02 204.2
4 1/2 19.12 229.4
5 21.27 255.2
6 25.52 306.2
1 1/2 x 2 10.20 122.4
2 1/2 12.75 153.0
3 15.31 183.8
4 20.42 245.0
5 25.52 306.2
6 30.63 367.5
1 3/4 x 2 11.91 142.9
2 1/2 14.89 178.7
3 17.85 214.2
4 23.82 285.8
2 x 2 1/2 17.02 204.2
3 20.42 245.0
3 1/2 23.80 285.6
4 27.23 326.7
5 34.03 408.4
6 40.84 490.1
STAINLESS FLATSHot Rolled Annealed and Pickled
17-4PHASTM A 564 Grade 630 AMS 5643
Color: Silver
17-4 also stocked as Cond H-1150 and H-1075. Other conditions available upon request.
2 1/2 x 3 25.52 306.3
4 34.03 408.4
5 42.54 510.5
6 51.05 612.6
3 x 4 40.84 490.1
5 51.05 612.6
6 61.26 735.1
STAINLESS FLATSHot Rolled Annealed and Pickled
17-4PHASTM A 564 Grade 630 AMS 5643
Color: SilverLbs. Est. lbs.
THK Width per ft. 12' bar
Ask about machined flats and squares.
276
17-4 also stocked as Cond H-1150 and H-1075. Other conditions available upon request.
277
CARBON STEEL GUIDE to
ROD and BAR
1018 A low carbon steel with fair machinability. Readilybrazed and welded. Suitable for applications that do notrequire the greater strength of high carbon and alloysteels.
1045 Medium carbon steel used for greater strengthsand hardness in the as rolled condition. Can also beforged. Ideally suited for flame on induction hardening.
1045 Turned Ground and Polished, medium carbon bars receive a three step finishing sequence tooffer overall accuracy, surface finish and concentricity.Since this product is not cold drawn, the internal stress-es are minimal and straightness is much improved.
1117 A low carbon, high manganese steel. Machin-ability much better than 1018. Deep and uniform caseachieved by hardening.
11L17 .15 to .35% addition of lead allows even faster machinability, without sacrificing case hardening properties for the basic alloy.
1141 Medium carbon steel with higher mechanical properties. Free machining with sulphur addition of .08/.13.
278
12L14 Widely known as LedLoy with .15 to .35% lead added to the basic screw machine steel.Exceptional high machinability with surface feet atapprox 300. Ideal for automatic screw machines. Notrecommended for parts that require welding.
1215 “Re-sulfurized and Re-phosphorized” screwmachine stock. Very high machinability, approachingspeeds and feeds of LedLoy. Well suited for automaticmachine operation.
1215 “Drawn Ground & Polished” offers the extra accu-racy and enhanced surface finish of fully processed coldfinish bar along with the inherent machinability charac-teristics of screw machine stock.
CARBON STEEL GUIDE to
ROD and BAR
279
1018 130 78 78,000 68,000 165
1025 120 72 80,000 68,000 163
1045 95 57 100,000 83,000 213
1117 150 91 85,000 73,000 170
11L17 172 104 69,000 58,000 137
1141 115 70 110,000 95,000 225
1144 125 76 110,000 100,000 230
Stressproof1 140 83 115,000 100,000 255
1212 165 100 78,000 60,000 167
12L14 280 170 78,000 68,000 165
1215 225 136 88,000 75,000 180
4140ann 110 66 102,000 90,000 228
41L40ann 127 77 103,000 93,000 228
4140HT 91 55 110,000 130,000 295
4150ann 100 60 100,000 70,000 200
4340ann 95 57 110,000 75,000 230
E52100 65 40 107,000 88,000 229
8620 105 63 100,000 85,000 210
8740ann 110 66 107,000 96,000 228
Approx Machinability Tensile* Yield* HardnessGrade SFPM Rating % PSI PSI BHN
*Values reflect typical mechanical properties of material. Actual values may vary.All values in the as drawn condition, except as noted.1212 = 100% machinability rating.1. Trademark LaSalle Steel Corp.
CARBON/ALLOY STEELMACHINABILITY COMPARISON
280
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
1/8 .1250 .0417 .500
3/16 .1875 .0939 1.127
1/4 .2500 .1669 2.001
5/16 .3125 .2608 3.130
3/8 .3750 .3755 4.506
7/16 .4375 .5111 6.133
1/2 .5000 .6676 8.011
9/16 .5625 .8449 10.14
5/8 .6250 1.043 12.52
11/16 .6875 1.262 15.14
3/4 .7500 1.502 18.02
13/16 .8125 1.763 21.16
7/8 .8750 2.045 24.54
15/16 .9375 2.347 28.16
1 1.000 2.670 32.04
1 1/16 1.062 3.015 36.18
1 1/8 1.125 3.380 40.56
1 3/16 1.187 3.766 45.19
1 1/4 1.250 4.173 50.08
1 5/16 1.313 4.600 55.20
1 3/8 1.375 5.049 60.59
1 7/16 1.438 5.518 66.22
STEEL ROUNDSCold Finish
1018 11L17ASTM A 108
Black - Color - Blue & White
281
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
1 1/2 1.500 6.008 72.10
1 9/16 1.563 6.520 78.24
1 5/8 1.625 7.052 84.62
1 11/16 1.688 7.604 91.25
1 3/4 1.750 8.178 98.14
1 13/16 1.813 8.773 105.3
1 7/8 1.875 9.388 112.7
1 15/16 1.938 10.021 120.2
2 2.000 10.68 128.2
2 1/16 2.063 11.36 136.3
2 1/8 2.125 12.06 144.7
2 3/16 2.188 12.78 153.4
2 1/4 2.250 13.52 162.2
2 5/16 2.313 14.28 171.4
2 3/8 2.375 15.06 180.7
2 7/16 2.438 15.87 190.4
2 1/2 2.500 16.69 200.3
2 9/16 2.563 17.53 210.4
2 5/8 2.625 18.40 220.8
2 11/16 2.688 19.29 231.5
2 3/4 2.750 20.19 242.3
2 7/8 2.875 22.07 264.9
STEEL ROUNDSCold Finish
1018 11L17ASTM A 108
Black - Color - Blue & White
282
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
3 3.000 24.03 288.4
3 1/8 3.125 26.08 312.9
3 3/16 3.188 27.13 325.6
3 1/4 3.250 28.21 338.5
3 5/16 3.313 29.30 351.6
3 3/8 3.375 30.42 365.0
3 7/16 3.438 31.55 378.6
3 1/2 3.500 32.71 392.5
3 5/8 3.625 35.09 421.1
3 3/4 3.750 37.55 450.6
3 7/8 3.875 40.10 481.2
4 4.000 42.73 512.7
4 1/8 4.125 45.44 545.3
4 1/4 4.250 48.23 578.7
4 3/8 4.375 51.11 613.3
4 7/16 4.438 52.58 630.9
4 1/2 4.500 54.08 649.0
4 5/8 4.625 57.12 685.4
4 3/4 4.750 60.25 723.0
4 7/8 4.875 63.46 761.5
STEEL ROUNDSCold Finish
1018 11L17ASTM A 108
Black - Color - Blue & White
283
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
5 5.000 66.76 801.1
5 1/8 5.125 70.14 841.7
5 1/4 5.250 73.60 883.2
5 3/8 5.375 77.15 926.0
5 7/16 5.438 78.95 947.4
5 1/2 5.500 80.78 969.4
5 5/8 5.625 84.49 1014
5 3/4 5.750 88.29 1060
5 7/8 5.875 92.17 1106
6 6.00 96.1 1154
6 1/4 6.25 104.3 1252
6 1/2 6.50 112.8 1354
6 3/4 6.75 121.7 1460
7 7.00 130.8 1570
7 1/4 7.25 140.4 1685
7 1/2 7.50 150.2 1802
8 8.00 170.9 2051
8 1/2 8.50 192.9 2315
9 9.00 216.3 2596
10 10.00 267.0 3204
11 11.00 324.2 3890
12 12.00 384.5 4614
STEEL ROUNDSCold Finish
1018 11L17ASTM A 108
Black - Color - Blue & White
284
STEEL ROUNDSCold Finish
12L14 1215ASTM A 108
White - Color - OrangeSize in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
1/16 .0625 .0104 .1248
5/64 .0781 .0163 .1956
3/32 .0937 .0235 .2820
7/64 .1094 .0320 .3840
1/8 .1250 .0417 .5004
9/64 .1406 .0528 .6336
5/32 .1562 .0652 .7824
11/64 .1719 .0789 .9468
3/16 .1875 .0939 1.127
13/64 .2031 .1102 1.322
7/32 .2187 .1278 1.534
15/64 .2344 .1467 1.760
1/4 .2500 .1669 2.003
.2560 .1750 2.100
17/64 .2656 .1884 2.261
9/32 .2812 .2113 2.536
19/64 .2969 .2354 2.825
5/16 .3125 .2608 3.130
.3190 .2719 3.262 Re-grind sizes.
285
STEEL ROUNDSCold Finish
12L14 1215ASTM A 108
White - Color - OrangeSize in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
21/64 .3281 .2875 3.451
11/32 .3437 .3156 3.787
23/64 .3594 .3449 4.139
3/8 .3750 .3755 4.506
.3810 .3880 4.656
25/64 .3906 .4074 4.889
13/32 .4062 .4408 5.290
27/64 .4219 .4753 5.704
7/16 .4375 .5111 6.133
29/64 .4531 .5482 6.578
15/32 .4687 .5869 7.042
31/64 .4844 .6266 7.519
1/2 .5000 .6676 8.011
.5080 .6897 8.254
33/64 .5156 .7099 8.519
17/32 .5312 .7538 9.045
35/64 .5469 .7987 9.584
9/16 .5625 .8449 10.14
37/64 .5781 .8924 10.71
19/32 .5937 .9416 11.30
39/64 .6094 .9917 11.90 Re-grind sizes.
286
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
5/8 .6250 1.043 12.52
.6310 1.064 12.77
21/32 .6406 1.096 13.15
41/64 .6562 1.150 13.80
43/64 .6719 1.206 14.47
11/16 .6875 1.262 15.14
45/64 .7031 1.320 15.84
23/32 .7187 1.380 16.56
47/64 .7344 1.440 17.28
3/4 .7500 1.502 18.02
.7560 1.527 18.32
49/64 .7656 1.565 18.78
25/32 .7812 1.630 19.56
51/64 .7969 1.696 20.35
13/16 .8125 1.763 21.15
27/32 .8437 1.901 22.81
7/8 .8750 2.045 24.54
57/64 .8906 2.118 25.42
29/32 .9062 2.193 26.32
15/16 .9375 2.347 28.16
31/32 .9687 2.506 30.07
63/64 .9844 2.588 31.06
STEEL ROUNDSCold Finish
12L14 1215ASTM A 108
White - Color - Orange
Re-grind sizes.
287
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
1 1.000 2.670 32.04
1.007 2.710 32.52
1 1/32 1.031 2.840 34.08
1 1/16 1.063 3.015 36.18
1 1/8 1.125 3.380 40.56
1 3/16 1.188 3.766 45.19
1 1/4 1.250 4.173 50.08
1 5/16 1.313 4.600 55.20
1 3/8 1.375 5.049 60.59
1 7/16 1.438 5.518 66.22
1 1/2 1.500 6.008 72.10
1 9/16 1.563 6.520 78.24
1 5/8 1.625 7.052 84.62
1 11/16 1.688 7.604 91.25
1 3/4 1.750 8.178 98.14
1 13/16 1.813 8.773 105.3
1 7/8 1.875 9.388 112.6
1 15/16 1.938 10.021 120.2
2 2.000 10.68 128.1
2 1/16 2.063 11.36 136.3
2 1/8 2.125 12.06 144.7
2 3/16 2.188 12.78 153.4
2 1/4 2.250 13.52 162.2
2 5/16 2.313 14.28 171.4
2 3/8 2.375 15.06 180.7
STEEL ROUNDSCold Finish
12L14 1215ASTM A 108
White - Color - Orange
Re-grind sizes.
288
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar2 7/16 2.438 15.87 190.4
2 1/2 2.500 16.69 200.3
2 9/16 2.562 17.53 210.4
2 5/8 2.625 18.40 220.8
2 11/16 2.688 19.29 231.5
2 3/4 2.750 20.19 242.3
2 13/16 2.813 21.12 253.4
2 7/8 2.875 22.07 264.8
2 15/16 2.938 23.04 276.5
3 3.000 24.03 288.4
3 1/8 3.125 26.08 313.0
3 1/4 3.250 28.23 338.7
3 5/16 3.313 29.30 352.0
3 3/8 3.375 30.42 365.0
3 7/16 3.438 31.55 378.6
3 1/2 3.500 32.71 392.5
3 5/8 3.625 35.09 421.1
3 3/4 3.750 37.55 451.0
3 7/8 3.875 40.10 481.2
STEEL ROUNDSCold Finish
12L14 1215ASTM A 108
White - Color - Orange
289
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
4 4.000 42.73 512.8
4 1/8 4.125 45.44 545.3
4 1/4 4.250 48.23 578.8
4 3/8 4.375 51.11 613.3
4 1/2 4.500 54.08 649.0
4 5/8 4.625 57.12 685.4
4 3/4 4.750 60.25 613.3
4 7/8 4.875 63.46 761.5
5 5.000 66.76 801.1
5 1/4 5.250 73.60 883.2
5 3/8 5.375 77.15 925.8
5 1/2 5.500 80.78 969.4
5 5/8 5.625 84.49 1014
5 3/4 5.750 88.29 1059
5 7/8 5.875 92.17 1106
6 6.000 96.13 1153
STEEL ROUNDSCold Finish
12L14 1215ASTM A 108
White - Color - Orange
290
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STEEL ROUNDSDrawn, Ground & Polished
+.0005 to -.0005
1215ASTM A 108Color: Orange
1/4 .2500 .1669 2.002
5/16 .3125 .2608 3.129
11/32 .3437 .3156 3.787
3/8 .3750 .3755 4.506
7/16 .4375 .5111 6.132
1/2 .5000 .6676 8.011
9/16 .5625 .8449 10.14
5/8 .6250 1.043 12.52
3/4 .7500 1.502 18.03
13/16 .8125 1.763 21.16
7/8 .8750 2.045 24.54
15/16 .9375 2.347 28.17
1 1.000 2.670 32.04
1 1/8 1.125 3.380 40.56
1 3/16 1.187 3.766 45.20
1 1/4 1.250 4.173 50.08
1 7/16 1.437 5.518 66.22
1 1/2 1.500 6.008 72.10
291
1/2 .500 .6676 16.03
5/8 .625 1.043 25.04
3/4 .750 1.502 36.05
1 1.000 2.670 64.08
1 1/8 1.125 3.380 81.12
1 3/16 1.187 3.766 90.39
1 1/4 1.250 4.173 100.1
1 5/16 1.312 4.600 110.4
1 3/8 1.375 5.049 121.1
1 7/16 1.437 5.518 132.4
1 1/2 1.500 6.008 144.2
1 9/16 1.562 6.520 156.4
1 5/8 1.625 7.052 169.2
1 11/16 1.687 7.604 182.5
1 3/4 1.750 8.178 196.2
1 7/8 1.875 9.388 225.3
1 15/16 1.937 10.02 240.4
STEEL ROUNDSTurned, Ground & Polished
1/2 to 1 1/2 minus .001 l 1 9/16 to 2 7/16 minus .0015
1045ASTM A 108
Color : Yellow & OrangeSize in Decimal Lbs. Est. lbs.Inches Size per ft. 24' bar
292
2 2.000 10.68 256.3
2 3/16 2.187 12.78 306.7
2 1/4 2.250 13.52 324.4
2 5/16 2.312 14.28 342.7
2 3/8 2.375 15.06 361.4
2 7/16 2.437 15.87 380.8
2 1/2 2.500 16.69 400.5
2 5/8 2.625 18.40 441.6
2 11/16 2.687 19.29 462.9
2 3/4 2.750 20.19 484.5
2 7/8 2.875 22.07 529.6
2 15/16 2.937 23.04 552.9
3 3.000 24.03 576.7
3 3/16 3.187 27.13 651.1
3 1/4 3.250 28.21 677.0
3 7/16 3.437 31.55 757.2
3 1/2 3.500 32.71 785.0
3 11/16 3.687 36.31 871.4
3 3/4 3.750 37.55 901.2
3 15/16 3.937 41.40 993.6
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 24' bar
STEEL ROUNDSTurned, Ground & Polished
1 9/16 to 2 7/16 minus .0015 l 2 1/2 to 2 15/16 minus .0023 to 3 15/16 minus .003
1045ASTM A 108
Color : Yellow & Orange
293
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 24' bar
4 4.000 42.73 1025
4 1/4 4.250 48.23 1157
4 7/16 4.437 52.58 1261
4 1/2 4.500 54.08 1297
4 3/4 4.750 60.25 1446
4 15/16 4.937 65.10 1562
5 5.000 66.76 1602
5 1/4 5.250 73.60 1766
5 7/16 5.437 78.95 1894
5 1/2 5.500 80.78 1938
6 6.000 96.13 2307
7 7.000 130.8 3139
8 8.000 170.9 4101
STEEL ROUNDSTurned, Ground & Polished
4 to 8 minus .006
1045ASTM A 108
Color : Yellow & Orange
294
1/8 .1250 .0460 .552
3/16 .1875 .1035 1.242
1/4 .2500 .1840 2.208
5/16 .3125 .2875 3.450
3/8 .3750 .4141 4.969
7/16 .4375 .5636 6.763
1/2 .5000 .7361 8.833
9/16 .5625 .9316 11.18
5/8 .6250 1.150 13.80
11/16 .6875 1.392 16.70
3/4 .7500 1.656 19.87
13/16 .8125 1.944 23.33
7/8 .8750 2.254 27.05
15/16 .9375 2.588 31.06
1 1.000 2.944 35.33
1 1/16 1.062 3.324 39.89
1 1/8 1.125 3.727 44.72
1 3/16 1.187 4.152 49.82
1 1/4 1.250 4.601 55.21
1 5/16 1.312 5.072 60.86
1 3/8 1.375 5.567 66.80
1 7/16 1.437 6.084 73.01
1 1/2 1.500 6.625 79.50
1 9/16 1.562 7.189 86.27
1 5/8 1.625 7.775 93.30
1 11/16 1.687 8.385 100.6
1 3/4 1.750 9.017 108.2
1 7/8 1.875 10.35 124.2
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STEEL HEXAGONSCold Finish
1018 1215ASTM A 108
Black - Color - Orange
295
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
2 2.000 11.78 141.4
2 1/8 2.125 13.30 159.6
2 3/16 2.187 14.09 169.1
2 1/4 2.250 14.91 178.9
2 3/8 2.375 16.61 199.3
2 1/2 2.500 18.40 220.8
2 5/8 2.625 20.29 243.5
2 3/4 2.750 22.27 267.2
2 7/8 2.875 24.34 292.1
3 3.000 26.50 318.0
3 1/2 3.500 36.07 432.8
3 3/4 3.750 41.41 496.9
4 4.000 47.11 565.3
STEEL HEXAGONSCold Finish
1018 1215ASTM A 108
Black - Color - Orange
296
1/8 .1250 .0460 .552
3/16 .1875 .1035 1.242
1/4 .2500 .1840 2.208
5/16 .3125 .2875 3.450
3/8 .3750 .4141 4.969
7/16 .4375 .5636 6.763
1/2 .5000 .7361 8.833
9/16 .5625 .9316 11.18
5/8 .6250 1.150 13.80
11/16 .6875 1.392 16.70
3/4 .7500 1.656 19.87
13/16 .8125 1.944 23.33
7/8 .8750 2.254 27.05
15/16 .9375 2.588 31.06
1 1.000 2.944 35.33
1 1/16 1.062 3.324 39.89
1 1/8 1.125 3.727 44.72
1 3/16 1.187 4.152 49.82
1 1/4 1.250 4.601 55.21
1 5/16 1.312 5.072 60.86
1 3/8 1.375 5.567 66.80
1 7/16 1.437 6.084 73.01
STEEL HEXAGONSCold Finish
12L14ASTM A 108Color: White
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
297
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STEEL HEXAGONSCold Finish
12L14ASTM A 108Color: White
1 1/2 1.500 6.625 79.50
1 9/16 1.562 7.189 86.27
1 5/8 1.625 7.775 93.30
1 11/16 1.687 8.385 100.6
1 3/4 1.750 9.017 108.2
1 7/8 1.875 10.35 124.2
2 2.000 11.78 141.4
2 1/8 2.125 13.30 159.6
2 3/16 2.187 14.09 169.1
2 1/4 2.250 14.91 178.9
2 3/8 2.375 16.61 199.3
2 1/2 2.500 18.40 220.8
2 5/8 2.625 20.29 243.5
2 3/4 2.750 22.27 267.2
2 7/8 2.875 24.34 292.1
3 3.000 26.50 318.0
3 1/2 3.500 36.07 432.8
3 3/4 3.750 41.41 496.9
4 4.000 47.11 565.3
298
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
1/8 .1250 .0531 .6372
5/32 .1562 .0831 .9972
3/16 .1875 .1195 1.434
7/32 .2187 .1628 1.954
1/4 .2500 .2125 2.550
9/32 .2812 .2690 3.228
5/16 .3125 .3320 3.984
3/8 .3750 .4781 5.737
7/16 .4375 .6508 7.810
1/2 .5000 .8500 10.20
9/16 .5625 1.076 12.91
5/8 .6250 1.328 15.94
11/16 .6875 1.607 19.28
3/4 .7500 1.913 22.96
13/16 .8125 2.245 26.94
7/8 .8750 2.603 31.24
15/16 .9375 2.988 35.86
1 1.000 3.400 40.80
1 1/16 1.062 3.838 46.06
1 1/8 1.125 4.303 51.64
1 3/16 1.187 4.795 57.54
1 1/4 1.250 5.313 63.76
1 5/16 1.312 5.857 70.28
1 3/8 1.375 6.428 77.14
STEEL SQUARESCold Finish
1018 12L14ASTM A 108
Black - Color - White
299
1 9/16 1.562 8.30 99.61
1 5/8 1.625 8.98 107.7
1 3/4 1.750 10.41 124.9
1 7/8 1.875 11.95 143.4
2 2.000 13.60 163.2
2 1/8 2.125 15.35 184.2
2 1/4 2.250 17.21 206.5
2 3/8 2.375 19.18 230.2
2 1/2 2.500 21.25 255.0
2 5/8 2.625 23.43 281.2
2 3/4 2 .750 25.71 308.5
3 3.000 30.60 367.2
3 1/4 3.250 35.91 430.9
3 1/2 3.500 41.65 499.8
3 3/4 3.750 47.81 573.7
4 4.000 54.40 652.8
4 1/2 4.500 68.85 826.2
5 5.000 85.00 1020
5 1/2 5.500 102.9 1234
6 6.000 122.4 1468
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
STEEL SQUARESCold Finish
1018 12L14ASTM A 108
Black - Color - White
300
1/8 x 1/4 .106 1.27
5/16 .130 1.56
3/8 .159 1.91
1/2 .212 2.54
5/8 .266 3.19
11/16 .292 3.50
3/4 .318 3.82
7/8 .372 4.46
1 .425 5.10
1 1/4 .531 6.37
1 1/2 .637 7.64
1 3/4 .743 8.92
2 .850 10.20
2 1/4 .956 11.48
2 1/2 1.063 12.76
2 3/4 1.169 14.03
3 1.275 15.30
3 1/2 1.488 17.86
3 3/4 1.594 19.13
4 1.700 20.40
4 1/2 1.913 22.96
5 2.125 25.50
6 2.550 30.60
STEEL FLATSCold Finish
1018ASTM A 108Color: Black
Lbs. Est. lbs.THK Width per ft. 12' bar
301
3/16 x 1/2 .3188 3.826
9/16 .3586 4.303
5/8 .3984 4.781
3/4 .4781 5.737
7/8 .5578 6.694
1 .6375 7.650
1 1/8 .7172 8.606
1 1/4 .7969 9.563
1 3/8 .8766 10.52
1 1/2 .9563 11.48
1 3/4 1.116 13.39
1 7/8 1.195 14.34
2 1.275 15.30
2 1/4 1.434 17.21
2 1/2 1.594 19.13
2 3/4 1.753 21.04
3 1.913 22.96
3 1/4 2.072 24.86
3 1/2 2.231 26.77
3 3/4 2.391 28.69
STEEL FLATSCold Finish
1018ASTM A 108Color: Black
Lbs. Est. lbs.THK Width per ft. 12' bar
302
3/16 x 4 2.550 30.60
4 1/2 2.869 34.43
5 3.188 38.26
6 3.823 45.90
8 5.100 61.20
10 6.375 76.50
1/4 x 5/16 .2656 3.187
3/8 .3188 3.826
7/16 .3719 4.463
1/2 .4250 5.100
9/16 .4781 5.737
5/8 .5313 6.376
11/16 .5844 7.013
3/4 .6375 7.650
7/8 .7438 8.926
1 .8500 10.20
1 1/8 .9563 11.48
1 1/4 1.063 12.76
1 3/8 1.169 14.03
1 1/2 1.275 15.30
1 5/8 1.381 16.57
1 3/4 1.488 17.86
1 7/8 1.594 19.13
Lbs. Est. lbs.THK Width per ft. 12' bar
STEEL FLATSCold Finish
1018ASTM A 108Color: Black
303
1/4 x 2 1.700 20.40
2 1/4 1.913 22.96
2 1/2 2.125 25.50
2 3/4 2.338 28.06
3 2.550 30.60
3 1/4 2.763 33.16
3 1/2 2.975 35.70
3 3/4 3.188 38.26
4 3.400 40.80
4 1/2 3.825 45.90
5 4.250 51.00
5 1/2 4.675 56.10
6 5.100 61.20
6 1/2 5.525 66.30
7 5.950 71.40
8 6.800 81.60
9 7.650 91.80
10 8.500 102.0
11 9.350 112.2
12 10.20 122.4
Lbs. Est. lbs.THK Width per ft. 12' bar
STEEL FLATSCold Finish
1018ASTM A 108Color: Black
304
5/16 x 3/8 .3984 4.781
7/16 .4648 5.578
1/2 .5313 6.376
9/16 .5977 7.172
5/8 .6641 7.969
3/4 .7969 9.563
7/8 .9297 11.16
1 1.063 12.76
1 1/8 1.195 14.34
1 1/4 1.328 15.94
1 3/8 1.461 17.53
1 1/2 1.594 19.13
1 3/4 1.859 22.31
2 2.125 25.50
2 1/4 2.391 28.69
2 1/2 2.656 31.87
2 3/4 2.922 35.06
Lbs. Est. lbs.THK Width per ft. 12' bar
STEEL FLATSCold Finish
1018ASTM A 108Color: Black
305
5/16 x 3 3.188 38.26
3 1/4 3.453 41.44
3 1/2 3.719 44.63
4 4.250 51.00
4 1/2 4.781 57.37
5 5.313 63.76
6 6.375 76.50
7 7.438 89.26
8 8.500 102.0
10 10.63 127.6
12 12.75 153.0
3/8 x 7/16 .5578 6.694
1/2 .6375 7.650
9/16 .7172 8.606
5/8 .7969 9.563
11/16 .8766 10.52
3/4 .9563 11.48
7/8 1.116 13.39
1 1.275 15.30
1 1/8 1.434 17.21
Lbs. Est. lbs.THK Width per ft. 12' bar
STEEL FLATSCold Finish
1018ASTM A 108Color: Black
306
3/8 x 1 1/4 1.594 19.13
1 3/8 1.753 21.04
1 1/2 1.913 22.96
1 5/8 2.072 24.86
1 3/4 2.231 26.77
1 7/8 2.391 28.69
2 2.550 30.60
2 1/4 2.869 34.43
2 1/2 3.188 38.26
2 3/4 3.506 42.07
3 3.825 45.90
3 1/4 4.144 49.73
3 1/2 4.463 53.56
4 5.100 61.20
4 1/2 5.738 68.86
5 6.375 76.50
5 1/2 7.013 84.16
6 7.650 91.80
7 8.925 107.1
8 10.20 122.4
9 11.48 137.8
10 12.75 153.0
11 14.03 168.4
12 15.30 183.6
14 17.85 214.2
Lbs. Est. lbs.THK Width per ft. 12' bar
STEEL FLATSCold Finish
1018ASTM A 108Color: Black
307
7/16 x 1/2 .7438 8.920
5/8 .9297 11.16
3 /4 1.116 13.39
1 1.488 17.86
1 1/4 1.859 22.31
1 1/2 2.231 26.77
2 2.975 35.70
2 1/2 3.719 44.63
3 4.463 53.56
3 1/2 5.206 62.47
4 5.950 71.40
5 7.438 89.26
6 8.925 107.1
Lbs. Est. lbs.THK Width per ft. 12' bar
STEEL FLATSCold Finish
1018ASTM A 108Color: Black
308
1/2 x 9/16 .9563 11.48
5/8 1.063 12.76
11/16 1.169 14.03
3/4 1.275 15.30
7/8 1.488 17.86
1 1.700 20.40
1 1/8 1.913 22.96
1 1/4 2.125 25.50
1 3/8 2.338 28.06
1 1/2 2.550 30.60
1 5/8 2.763 33.16
1 3/4 2.975 35.70
2 3.400 40.80
2 1/4 3.825 45.90
2 1/2 4.250 51.00
2 3/4 4.675 56.10
3 5.100 61.20
3 1/4 5.525 66.30
3 1/2 5.950 71.40
Lbs. Est. lbs.THK Width per ft. 12' bar
STEEL FLATSCold Finish
1018ASTM A 108Color: Black
309
1/2 x 4 6.800 81.60
4 1/4 7.225 86.70
4 1/2 7.650 91.80
5 8.500 102.0
5 1/2 9.350 112.2
6 10.20 122.4
7 11.90 142.8
8 13.60 163.2
9 15.30 183.6
10 17.00 204.0
11 18.70 224.4
12 20.40 244.8
9/16 x 5/8 1.195 14.34
3/4 1.434 17.21
7/8 1.673 20.08
1 1.913 22.96
1 1/4 2.391 28.69
1 1/2 2.869 34.43
1 3/4 3.347 40.16
2 3.825 45.90
2 1/2 4.781 57.37
Lbs. Est. lbs.THK Width per ft. 12' bar
STEEL FLATSCold Finish
1018ASTM A 108Color: Black
310
Lbs. Est. lbs.THK Width per ft. 12' bar
5/8 x 11/16 1.461 17.53
3/4 1.594 19.13
7/8 1.859 22.31
1 2.125 25.50
1 1/8 2.391 28.69
1 1/4 2.656 31.87
1 3/8 2.922 35.06
1 1/2 3.188 38.26
1 5/8 3.453 41.44
1 3/4 3.719 44.63
2 4.250 51.00
2 1/4 4.781 57.37
2 1/2 5.313 63.76
2 3/4 5.844 70.13
3 6.375 76.50
3 1/4 6.906 82.87
3 1/2 7.438 89.26
4 8.500 102.0
4 1/2 9.563 114.8
5 10.63 127.6
5 1/2 11.69 140.3
STEEL FLATSCold Finish
1018ASTM A 108Color: Black
311
5/8 x 6 12.75 153.0
7 14.88 178.6
8 17.00 204.0
9 19.13 229.6
10 21.25 255.0
11 23.38 280.6
12 25.50 306.0
3/4 x 7/8 2.231 26.77
1 2.550 30.60
1 1/8 2.869 34.43
1 1/4 3.188 38.26
1 3/8 3.506 42.07
1 1/2 3.825 45.90
1 5/8 4.144 49.73
1 3/4 4.463 53.56
2 5.100 61.20
2 1/4 5.738 68.86
2 1/2 6.375 76.50
2 3/4 7.013 84.16
Lbs. Est. lbs.THK Width per ft. 12' bar
STEEL FLATSCold Finish
1018ASTM A 108Color: Black
312
3/4 x 3 7.650 91.80
3 1/4 8.288 99.46
3 1/2 8.925 107.1
4 10.20 122.4
4 1/2 11.48 137.8
5 12.75 153.0
5 1/2 14.03 168.4
6 15.30 183.6
6 1/2 16.58 199.0
7 17.85 214.2
8 20.40 244.8
9 22.95 275.4
10 25.50 306.0
11 28.05 336.6
12 30.60 367.2
Lbs. Est. lbs.THK Width per ft. 12' bar
STEEL FLATSCold Finish
1018ASTM A 108Color: Black
313
7/8 x 1 2.975 35.70
1 1/8 3.347 40.16
1 1/4 3.719 44.63
1 3/8 4.091 49.09
1 1/2 4.463 53.56
1 3/4 5.206 62.47
2 5.950 71.40
2 1/4 6.694 80.33
2 1/2 7.438 89.26
2 3/4 8.181 98.17
3 8.925 107.1
3 1/2 10.41 124.9
4 11.90 142.8
4 1/2 13.39 160.7
5 14.88 178.6
5 1/2 16.36 196.3
6 17.85 214.2
8 23.80 285.6
10 29.75 357.0
12 35.70 428.4
Lbs. Est. lbs.THK Width per ft. 12' bar
STEEL FLATSCold Finish
1018ASTM A 108Color: Black
314
1 x 1 1/8 3.825 45.90
1 1/4 4.250 51.00
1 3/8 4.675 56.10
1 1/2 5.100 61.20
1 5/8 5.525 66.30
1 3/4 5.950 71.40
2 6.800 81.60
2 1/4 7.650 91.80
2 1/2 8.500 102.0
2 3/4 9.350 112.2
3 10.20 122.4
3 1/4 11.05 132.6
3 1/2 11.90 142.8
3 3/4 12.76 153.1
4 13.60 163.2
4 1/2 15.30 183.6
5 17.00 204.0
5 1/2 18.70 224.4
6 20.40 244.8
7 23.80 285.6
8 27.20 326.4
9 30.60 367.2
10 34.00 408.0
11 37.40 448.8
12 40.80 489.6
Lbs. Est. lbs.THK Width per ft. 12' bar
STEEL FLATSCold Finish
1018ASTM A 108Color: Black
315
1 1/8 x 1 1/4 4.781 57.37
1 3/8 5.259 63.11
1 1/2 5.738 68.86
1 5/8 6.216 74.59
1 3/4 6.694 80.33
2 7.650 91.80
2 1/4 8.606 103.3
2 1/2 9.563 114.8
3 11.48 137.8
4 15.30 183.6
Lbs. Est. lbs.THK Width per ft. 12' bar
STEEL FLATSCold Finish
1018ASTM A 108Color: Black
316
1 1/4 x 1 3/8 5.844 70.13
1 1/2 6.375 76.50
1 5/8 6.906 82.87
1 3/4 7.438 89.26
1 7/8 7.969 95.63
2 8.500 102.0
2 1/4 9.563 114.8
2 1/2 10.63 127.6
2 3/4 11.69 140.3
3 12.75 153.0
3 1/4 13.81 165.7
3 1/2 14.88 178.6
4 17.00 204.0
4 1/2 19.13 229.6
5 21.25 255.0
5 1/2 23.38 280.6
6 25.50 306.0
8 34.00 408.0
10 42.50 510.0
12 51.00 612.0
Lbs. Est. lbs.THK Width per ft. 12' bar
STEEL FLATSCold Finish
1018ASTM A 108Color: Black
317
1 3/8 x 1 1/2 7.013 84.16
2 9.350 112.2
3 14.03 168.4
1 1/2 x 1 5/8 8.288 99.46
1 3/4 8.925 107.1
1 7/8 9.563 114.8
2 10.20 122.4
2 1/4 11.48 137.8
2 1/2 12.75 153.0
2 3/4 14.03 168.4
3 15.30 183.6
3 1/4 16.58 199.0
3 1/2 17.85 214.2
4 20.40 244.8
4 1/2 22.95 275.4
5 25.50 306.0
5 1/2 28.05 336.6
6 30.60 367.2
8 40.80 489.6
10 51.00 612.0
12 61.20 734.4
Lbs. Est. lbs.THK Width per ft. 12' bar
STEEL FLATSCold Finish
1018ASTM A 108Color: Black
318
1 5/8 x 2 11.05 132.6
2 1/2 13.81 165.7
3 16.58 199.0
4 22.10 265.2
1 3/4 x 2 11.90 142.8
2 1/4 13.39 160.7
2 1/2 14.88 178.6
2 3/4 16.36 196.3
3 17.85 214.2
3 1/2 20.83 250.0
4 23.80 285.6
4 1/2 26.78 321.4
5 29.75 357.0
5 1/2 32.73 392.8
6 35.70 428.4
Lbs. Est. lbs.THK Width per ft. 12' bar
STEEL FLATSCold Finish
1018ASTM A 108Color: Black
319
2 x 2 1/4 15.30 183.6
2 1/2 17.00 204.0
2 3/4 18.70 224.4
3 20.40 244.8
3 1/2 23.80 285.6
4 27.20 326.4
4 1/2 30.60 367.2
5 34.00 408.0
6 40.80 489.6
8 54.40 652.8
10 68.00 816.0
12 81.60 979.2
2 1/4 x 2 1/2 19.13 229.6
2 3/4 21.04 252.5
3 22.95 275.4
3 1/4 24.86 298.3
3 1/2 26.78 321.4
4 30.60 367.2
4 1/2 34.43 413.2
5 38.25 459.0
6 45.90 550.8
Lbs. Est. lbs.THK Width per ft. 12' bar
STEEL FLATSCold Finish
1018ASTM A 108Color: Black
320
2 1/2 x 2 3/4 23.38 280.6
3 325.50 306.0
3 1/2 29.75 357.0
4 34.00 408.0
4 1/2 38.25 459.0
5 42.50 510.0
6 51.00 612.0
8 68.00 816.0
10 85.00 1020
3 x 3 1/2 35.70 428.4
4 40.80 489.6
5 51.00 612.0
8 81.60 979.2
10 102.0 1224
STEEL FLATSCold Finish
1018ASTM A 108
Lbs. Est. lbs.THK Width per ft. 12' bar
321
3 1/2 x 4 47.60 571.5
6 71.40 857.2
8 95.29 114.3
4 x 4 1/2 61.20 734.8
5 68.00 816.4
6 81.60 979.8
8 108.8 1305
STEEL FLATSCold Finish
1018ASTM A 108Color: Black
Lbs. Est. lbs.THK Width per ft. 12' bar
322
FLAT GROUND STOCK
0-1 Flat Ground Stock is an electric furnace melt oil-hardening tool steel supplied with a fully spheroidizedstructure. A non-shrinking general purpose tool steel, ithas excellent abrasion resistance, toughness, andmachinability characteristics.
Sizes: 1/16" x 1/2" up to 2" x 4" Length: 18" or 36"(also oversize stock)
1018 Low Carbon Flat Ground Stock is a fine grained,vacuum-degassed carbon steel. It is easily machined,has excellent weldability, and responds uniformly tocase hardening. It is often used in applications such asbackup plate, stripper plates, punch pads, jigs, fixtures,cams and patterns.
Sizes: 1/16" x 1/2" up to 2" x 2" Length: 24”
Thickness +/-.001 to 1.250 thick incl +/-.002 over 1.250 thick
Width +.005 - .000
Length +1/16 minimum
Thickness +.010 to .015+.010 to .015
Width +.010 to .015
Length + 1/16 minimum
SPECIFICATIONSTolerances Flat Ground Stock
Surface ConditionsFlat ground stock is 100% free of decarburization on all six sidesand can be heat treated immediately without further metal removal.
W-1 Ground and Polished Drill RodWATER HARDENING is the most popular, versatile andleast expensive grade of drill rod. It is a fine-grainedelectric furnace melted commercial grade tool steelwhich is supplied in the fully spheroidized 100% decarbfree condition.
323
COPPERMETAL GUIDEto
ROD and BAR
110 Electrolytic Tough Pitch Copper (ETP) Has thehighest degree of electrical conductivity of any metalexcept silver. It can be cold-worked or hot-formed andhas highly suitable characteristics for welding and soldering. Corrosion resistance is excellent. Conform-ing to ASTM B 133 and B 187.
145 Tellurium Copper Because of the exceptional freecutting properties inherent in this metal, C14500 is welladapted for use in high-speed automatic screwmachines. It cold heads well and is an outstandingalloy for the production of hot forged products requiringhigh conductivity and good corrosion resistance. It hasalso proved to be an excellent material for use in opera-tions requiring furnace brazing and annealing in areducing atmosphere where high conductivity and freemachining must be maintained.
Typical uses of C14500 are transformer and circuit-breaker terminals, hot forged studs, nuts andbolts, and current-carrying parts that require finemachine work and drilling. It is also is used for weldingtorch tips and marine and domestic hardware.Conforming to ASTM B 301.
314 Leaded Commercial Bronze Combines the natural corrosion resistance of C22000 with the machinability typical of leaded brasses. Like C22000, itis an alpha brass nominally composed of 89% copperand 9% zinc, but is also contains approximately 2%lead to impart free-cutting characteristics. The relativelylow zinc content of C31400 provides excellent corrosionresistance in potable water. It also has a pleasing gold-en color that matches C22000 hardware. Alloy C31400is also suitable for outdoor use due to its resistance tostress corrosion cracking and to corrosion in general,but where the highest strength is not required.Conforming to ASTM B 140.
324
COPPERMETAL GUIDEto
ROD and BAR
360 Free-Cutting This 1/2 hard alloy is best suited forautomatic screw machining. Rating of 100. It is easilysoldered or brazed and has good resistance to corro-sion. Conforming to ASTM B 16.
464 Naval Brass Provides a high degree of corrosionwhile also assuring greater strength and rigidity. It isreadily soldered, brazed, and welded. Typicalapplications include nuts, bolts, rivets, valve, stems,pump shafts and marine hardware. Conforming to ASTM B 21.
544 Phosphor Bronze (B-2) Finds its primaryapplication where strength and bearing properties arerequired, and in addition, offers the corrosion resistance characteristic of the high tin phosphor bronzes. In particular, the alloy is noted for its stress corrosioncracking resistance and its high endurance limit. Thehigh lead content makes it an extremely machinablealloy that is equalled by few in the wrought metal indus-try as a bearing alloy. Conforming to ASTM B 139.
642 Aluminum Silicon Bronze Manufactured mostly inthe form of round, hexagonal, and octagonal rods forhot forming and free machining. Although not recom-mended for cold working or welding, these alloys haveexceptionally high strength. Studs, bolts, and forgingsare well-suited for heavy switchgear and electrical hard-ware, especially in outdoor construction. C64200 isconsidered one of the best valve stem alloys. Otherapplications include gears, marine hardware, nuts, poleline hardware, as well as valve bodies and components.Conforming to ASTM B 150.
932 (SAE 660) Bearing Bronze Has excellent loadcapacity and anti-friction qualities for applications suchas machine tools, power transmission equipment, andmany types of accessory and special equipment. It hasgood machining characteristics and resistance to manychemicals. Conforming to ASTM B 505.
325
1/8 .1250 .0476 .568
3/16 .1875 .1070 1.284
1/4 .2500 .1903 2.284
5/16 .3125 .2973 3.568
3/8 .3750 .4281 5.137
7/16 .4375 .5827 6.992
1/2 .5000 .7611 9.133
9/16 .5625 .9320 11.56
5/8 .6250 1.189 14.27
11/16 .6875 1.439 17.27
3/4 .7500 1.712 20.54
13/16 .8125 2.010 24.12
7/8 .8750 2.331 27.97
1 1.000 3.044 36.53
1 1/8 1.125 3.853 46.24
1 1/4 1.250 4.757 57.08
1 3/8 1.375 5.755 69.06
1 1/2 1.500 6.849 82.19
1 5/8 1.625 8.039 96.47
1 3/4 1.750 9.323 111.90
COPPER ROUNDSElectrolytic Tough Pitch
Alloy 110ASTM B 133 ASTM B 187
Full Hard Temper
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
326
2 2.000 12.18 146.2
2 1/4 2.250 15.41 184.9
2 3/8 2.375 17.17 206.0
2 1/2 2.500 19.03 228.4
2 5/8 2.625 20.98 251.8
2 3/4 2.750 23.02 276.2
3 3.000 27.40 328.8
3 1/2 3.500 37.29 447.5
4 4.000 48.71 584.5
4 1/2 4.500 61.65 739.8
COPPER ROUNDSElectrolytic Tough Pitch
Alloy 110ASTM B 133 ASTM B 187
Full Hard Temper
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
327
COPPER SQUARESElectrolytic Tough Pitch
Alloy 110ASTM B 187
Full Hard Temper
1/4 .250 .242 2.91
3/8 .375 .545 6.54
1/2 .500 .969 11.63
5/8 .625 1.514 18.17
3/4 .750 2.180 26.16
7/8 .875 2.968 35.62
1 1.000 3.876 46.51
1 1/4 1.250 6.056 72.67
1 1/2 1.500 8.721 104.70
1 3/4 1.750 11.87 142.40
2 2.000 15.50 186.0
3 3.000 34.88 418.6
4 4.000 62.02 744.2
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
328
1/16 x 1/2 .121 1.453
5/8 .151 1.817
3/4 .181 2.172
1 .242 2.908
2 .485 5.820
3/32 x 3/8 .136 1.636
1/2 .181 2.172
5/8 .227 2.726
1 .364 4.363
1 1/4 .455 5.460
1 1/2 .545 6.540
1/8 x 1/4 .121 1.453
3/8 .182 2.180
1/2 .242 2.908
5/8 .303 3.634
3/4 .363 4.356
7/8 .424 5.087
1 .485 5.820
1 1/4 .606 7.272
1 1/2 .727 8.724
1 3/4 .848 10.170
COPPER RECTANGLESSquare Edge/Electrolytic Tough Pitch
Alloy 110ASTM B 187
Full Hard TemperLbs. Est. lbs.
THK Width per ft. 12' bar
329
1/8 x 2 .969 11.63
3 1.454 17.45
4 1.938 23.26
3/16 x 1/2 .363 4.36
5/8 .454 5.45
3/4 .545 6.54
7/8 .636 7.61
1 .727 8.72
1 1/4 .908 10.90
1 1/2 1.090 13.08
1 3/4 1.272 15.26
2 1.454 17.45
3 2.180 26.16
COPPER RECTANGLESSquare Edge/Electrolytic Tough Pitch
Alloy 110ASTM B 187
Full Hard TemperLbs. Est. lbs.
THK Width per ft. 12' bar
330
1/4 x 1/2 .485 5.82
5/8 .606 7.27
3/4 .729 8.74
7/8 .848 10.17
1 .969 11.63
1 1/4 1.211 14.53
1 1/2 1.454 17.44
1 3/4 1.696 20.35
2 1.938 23.26
2 1/4 2.180 26.16
2 1/2 2.423 29.08
3 2.907 34.88
3 1/2 3.390 40.70
4 3.876 46.51
5 4.845 58.14
6 5.814 69.77
5/16 x 3/4 .908 10.90
1 1.211 14.53
1 1/2 1.817 21.80
2 2.423 29.08
COPPER RECTANGLESSquare Edge/Electrolytic Tough Pitch
Alloy 110ASTM B 187
Full Hard TemperLbs. Est. lbs.
THK Width per ft. 12' bar
331
3/8 x 1/2 .721 8.65
3/4 1.090 13.08
1 1.454 17.45
1 1/4 1.817 21.80
1 1/2 2.180 26.16
2 2.907 34.88
2 1/2 3.634 43.61
3 4.361 52.33
4 5.814 69.77
5 7.268 87.22
6 8.721 104.70
COPPER RECTANGLESSquare Edge/Electrolytic Tough Pitch
Alloy 110ASTM B 187
Full Hard TemperLbs. Est. lbs.
THK Width per ft. 12' bar
332
1/2 x 3/4 1.454 17.45
1 1.938 23.26
1 1/4 2.423 29.08
1 1/2 2.907 34.88
2 3.876 46.51
2 1/2 4.845 58.14
3 5.814 69.77
4 7.752 93.02
5 9.690 116.3
6 11.63 139.6
5/8 x 1 2.423 29.08
1 1/2 3.634 43.61
2 4.845 58.14
2 1/2 6.056 72.67
3 7.268 87.22
4 9.690 116.3
3/4 x 1 2.907 34.88
1 1/4 3.634 43.61
COPPER RECTANGLESSquare Edge/Electrolytic Tough Pitch
Alloy 110ASTM B 187
Full Hard TemperLbs. Est. lbs.
THK Width per ft. 12' bar
333
3/4 x 1 1/2 4.361 52.33
1 3/4 5.087 61.04
2 5.814 69.77
3 8.721 104.7
4 11.63 139.6
6 17.44 209.3
1 x 1 1/4 4.845 58.14
1 1/2 5.814 69.77
1 3/4 6.783 81.40
2 7.752 93.02
2 1/2 9.690 116.3
3 11.63 139.6
4 15.50 186.0
5 19.38 232.6
6 23.02 279.1
1 1/4 x 2 9.69 116.3
3 14.54 174.5
4 19.38 232.6
1 1/2 x 2 11.63 139.6
2 1/2 14.54 174.5
3 17.44 209.3
2 x 2 1/2 19.38 232.6
3 23.26 279.1
4 31.01 372.1
COPPER RECTANGLESSquare Edge/Electrolytic Tough Pitch
Alloy 110ASTM B 187
Full Hard TemperLbs. Est. lbs.
THK Width per ft. 12' bar
334
1/8 .1250 .0476 .571
3/16 .1875 .1070 1.284
1/4 .2500 .1903 2.283
5/16 .3125 .2973 3.568
3/8 .3750 .4281 5.137
7/16 .4375 .5827 6.992
1/2 .5000 .7611 9.133
9/16 .5625 .9632 11.56
5/8 .6250 1.189 14.27
11/16 .6875 1.439 17.27
3/4 .7500 1.712 20.54
7/8 .8750 2.331 27.97
1 1.000 3.044 36.53
1 1/8 1.125 3.853 46.24
1 3/16 1.187 4.293 51.52
1 1/4 1.250 4.757 57.08
1 3/8 1.375 5.755 69.06
1 1/2 1.500 6.850 82.20
1 5/8 1.625 8.039 96.47
1 3/4 1.750 9.323 111.9
TELLURIUM COPPER ROUNDSFree Cutting
Alloy 145ASTM B 301
Half Hard
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
335
TELLURIUM COPPER ROUNDSFree Cutting
Alloy 145ASTM B 301
Half Hard
2 2.000 12.18 146.2
2 1/4 2.250 15.41 184.9
2 3/8 2.375 17.17 206.0
2 1/2 2.500 19.03 228.4
2 5/8 2.625 20.98 251.8
2 3/4 2.750 23.02 276.2
3 3.000 27.40 328.8
3 1/2 3.500 37.29 447.5
4 4.000 48.71 584.5
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
336
1/8 .1250 .0471 .565
5/32 .1562 .0737 .884
3/16 .1875 .1060 1.272
7/32 .2187 .1444 1.733
1/4 .2500 .1885 2.262
5/16 .3125 .2945 3.534
3/8 .3750 .4241 5.089
7/16 .4375 .5773 6.928
1/2 .5000 .7540 9.048
9/16 .5625 .9542 11.45
5/8 .6250 1.178 14.14
11/16 .6875 1.426 17.11
3/4 .7500 1.696 20.35
7/8 .8750 2.309 27.71
1 1.000 3.016 36.19
1 1/8 1.125 3.817 45.80
1 1/4 1.250 4.712 56.54
1 3/8 1.375 5.702 68.82
1 1/2 1.500 6.786 81.43
1 3/4 1.750 9.236 110.8
1 7/8 1.875 10.60 127.2
2 2.000 12.06 144.7
2 1/4 2.250 15.27 183.2
2 1/2 2.500 18.87 226.4
COMMERCIAL BRONZE ROUNDSFree Cutting, “Leaded”
Alloy 314ASTM B 140
Half HardSize in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
337
BRASS ROUNDSFree Cutting
Alloy 360ASTM B 16
Half Hard
1/16 .0625 .0113 .1356
3/32 .0937 .0255 .3060
7/64 .1094 .0346 .4152
1/8 .1250 .0452 .5424
9/64 .1406 .0572 .6864
5/32 .1562 .0707 .8484
11/64 .1719 .0855 1.026
3/16 .1875 .1017 1.220
13/64 .2031 .1194 1.433
7/32 .2187 .1385 1.662
15/64 .2344 .1590 1.908
1/4 .2500 .1808 2.170
17/64 .2656 .2041 2.449
9/32 .2812 .2290 2.748
19/64 .2969 .2551 3.061
5/16 .3125 .2826 3.391
21/64 .3281 .3115 3.738
11/32 .3437 .3420 4.104
23/64 .3594 .3737 4.484
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
338
BRASS ROUNDSFree Cutting
Alloy 360ASTM B 16
Half Hard
3/8 .3750 .4069 4.883
13/32 .4062 .4776 5.731
7/16 .4375 .5538 6.646
15/32 .4687 .6359 7.631
1/2 .5000 .7234 8.681
17/32 .5312 .8167 9.800
9/16 .5625 .9155 10.99
19/32 .5937 1.020 12.24
5/8 .6250 1.130 13.56
21/32 .6562 1.246 14.95
11/16 .6875 1.368 16.42
23/32 .7187 1.495 17.94
3/4 .7500 1.628 19.54
25/32 .7812 1.766 21.19
13/16 .8125 1.910 22.92
27/32 .8437 2.060 24.72
7/8 .8750 2.215 26.58
29/32 .9062 2.377 28.52
15/16 .9375 2.540 30.52
31/32 .9687 2.716 32.59
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
339
BRASS ROUNDSFree Cutting
Alloy 360ASTM B 16
Half Hard
1 1.000 2.893 34.72
1 1/32 1.031 3.007 36.08
1 1/16 1.062 3.266 39.19
1 3/32 1.094 3.462 41.54
1 1/8 1.125 3.662 43.94
1 3/16 1.187 4.080 48.96
1 1/4 1.250 4.521 54.25
1 5/16 1.312 4.984 59.81
1 3/8 1.375 5.470 65.64
1 7/16 1.437 5.979 71.75
1 1/2 1.500 6.510 78.12
1 9/16 1.562 7.064 84.77
1 5/8 1.625 7.640 91.68
1 11/16 1.687 8.239 98.87
1 3/4 1.750 8.861 106.3
1 13/16 1.812 9.505 114.1
1 7/8 1.875 10.17 122.0
1 15/16 1.938 10.86 130.3
2 2.000 11.57 138.8
2 1/16 2.062 12.31 147.7
2 1/8 2.125 13.07 156.8
2 3/16 2.187 13.85 166.2
2 1/4 2.250 14.65 175.8
2 3/8 2.375 16.32 195.8
2 1/2 2.500 18.08 217.0
2 5/8 2.625 19.94 239.3
2 3/4 2.750 21.88 262.6
2 7/8 2.875 23.92 287.0
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
340
BRASS ROUNDSFree Cutting
Alloy 360ASTM B 16
Half Hard
3 3.000 26.04 312.5
3 1/8 3.125 28.26 339.1
3 1/4 3.250 30.56 366.7
3 1/2 3.500 35.44 425.3
3 5/8 3.625 38.02 456.2
3 3/4 3.750 40.69 488.3
4 4.000 46.29 555.5
4 1/8 4.125 49.23 590.8
4 1/4 4.250 52.26 627.1
4 1/2 4.500 58.59 703.1
4 3/4 4.750 65.28 783.4
5 5.000 72.34 868.1
5 1/2 5.500 87.53 1050
6 6.000 104.2 1250
7 7.000 141.8 Mill Lengths
8 8.000 185.2 Mill Lengths
9 9.000 234.4 Mill Lengths
10 10.00 289.3 Mill Lengths
11 11.00 349.7 Mill Lengths
12 12.00 416.2 Mill Lengths
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
341
1/8 .1250 .0498 .598
3/16 .1875 .1122 1.346
7/32 .2187 .1527 1.832
1/4 .2500 .1994 2.393
9/32 .2812 .2524 3.029
5/16 .3125 .3116 3.739
11/32 .3437 .3771 4.525
3/8 .3750 .4486 5.383
13/32 .4062 .5267 6.320
7/16 .4375 .6106 7.327
1/2 .5000 .7976 9.571
9/16 .5625 1.009 12.11
5/8 .6250 1.246 14.95
11/16 .6875 1.508 18.10
3/4 .7500 1.795 21.54
13/16 .8125 2.106 25.27
7/8 .8750 2.443 29.32
15/16 .9375 2.804 33.65
1 1.000 3.190 38.28
1 1/16 1.063 3.602 43.22
1 1/8 1.125 4.038 48.46
1 3/16 1.187 4.499 53.99
1 1/4 1.250 4.985 59.82
1 5/16 1.312 5.496 65.95
1 3/8 1.375 6.032 72.38
BRASS HEXAGONSFree Cutting
Alloy 360ASTM B 16
Half HardSize in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
342
1 7/16 1.437 6.593 79.12
1 1/2 1.500 7.178 86.14
1 9/16 1.562 7.789 93.47
1 5/8 1.625 8.424 101.1
1 11/16 1.687 9.085 109.0
1 3/4 1.750 9.770 117.2
1 13/16 1.812 10.48 125.8
1 7/8 1.875 11.22 134.6
2 2.000 12.76 153.1
2 1/8 2.125 14.41 172.9
2 1/4 2.250 16.15 193.8
2 3/8 2.375 18.00 216.0
2 1/2 2.500 19.94 239.3
2 3/4 2.750 24.13 289.6
3 3.000 28.71 344.5
3 1/4 3.250 31.13 373.6
3 1/2 3.500 39.08 468.9
4 4.000 51.04 612.5
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
BRASS HEXAGONSFree Cutting
Alloy 360ASTM B 16
Half Hard
Free Machining increases your cycle timeand saves you money.
343
BRASS SQUARESFree Cutting
Alloy 360ASTM B 16
Half Hard
3/32 .0937 .0324 .389
1/8 .1250 .0576 .691
5/32 .1562 .0900 1.080
3/16 .1875 .1295 1.554
7/32 .2187 .1764 2.117
1/4 .2500 .2303 2.764
9/32 .2812 .2915 3.498
5/16 .3125 .3598 4.318
3/8 .3750 .5181 6.217
7/16 .4375 .7051 8.461
1/2 .5000 .9210 11.05
9/16 .5625 1.166 13.99
5/8 .6250 1.439 17.27
11/16 .6875 1.741 20.89
3/4 .7500 2.072 24.86
13/16 .8125 2.432 29.18
7/8 .8750 2.821 33.85
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
344
1 1.000 3.684 44.21
1 1/8 1.125 4.663 55.96
1 1/4 1.250 5.756 69.07
1 3/8 1.375 6.965 83.58
1 1/2 1.500 8.289 99.47
1 5/8 1.625 9.728 116.7
1 3/4 1.750 11.28 135.4
2 2.000 14.74 176.9
2 1/4 2.250 18.65 223.8
2 1/2 2.500 23.03 276.4
3 3.000 33.16 397.9
4 4.000 58.94 707.3
BRASS SQUARESFree Cutting
Alloy 360ASTM B 16
Half Hard
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
345
BRASS RECTANGLESFree Cutting
Alloy 360ASTM B 16
Half Hard
1/8 x 3/16 .0863 1.036
1/4 .1151 1.381
5/16 .1439 1.727
3/8 .1727 2.072
1/2 .2303 2.764
5/8 .2878 3.454
3/4 .3454 4.145
7/8 .4029 4.835
1 .4605 5.526
1 1/4 .5756 6.907
1 1/2 .6908 8.290
1 3/4 .8059 9.671
2 .9210 11.05
2 1/4 1.036 12.43
2 1/2 1.151 13.81
3 1.382 16.58
3 1/2 1.612 19.34
4 1.842 22.10
Lbs. Est. lbs.THK Width per ft. 12' bar
346
3/16 x 3/8 .2590 3.108
1/2 .3454 4.145
5/8 .4317 5.180
3/4 .5181 6.217
7/8 .6044 7.253
1 .6908 8.290
1 1/4 .8634 10.36
1 1/2 1.036 12.43
1 3/4 1.209 14.51
2 1.382 16.58
2 1/2 1.727 20.72
3 2.072 24.86
3 1/2 2.418 29.02
4 2.763 33.16
1/4 x 5/16 .2878 3.454
3/8 .3454 4.145
1/2 .4605 5.526
5/8 .5756 6.907
3/4 .6908 8.290
7/8 .8059 9.671
1 .9210 11.05
1 1/4 1.151 13.81
1 1/2 1.382 16.58
BRASS RECTANGLESFree Cutting
Alloy 360ASTM B 16
Half HardLbs. Est. lbs.
THK Width per ft. 12' bar
347
1/4 x 1 3/4 1.612 19.34
2 1.842 22.10
2 1/4 2.072 24.86
2 1/2 2.303 27.64
2 3/4 2.533 30.40
3 2.763 33.16
3 1/2 3.224 38.69
4 3.684 44.21
5/16 x 3/8 .4317 5.18
1/2 .5756 6.91
5/8 .7195 8.63
3/4 .8634 10.36
1 1.151 13.81
1 1/4 1.439 17.27
1 1/2 1.727 20.72
1 3/4 2.015 24.18
2 2.303 27.64
2 1/2 2.878 34.54
3 3.454 41.45
BRASS RECTANGLESFree Cutting
Alloy 360ASTM B 16
Half Hard
Lbs. Est. lbs.THK Width per ft. 12' bar
348
BRASS RECTANGLESFree Cutting
Alloy 360ASTM B 16
Half Hard
3/8 x 1/2 .6908 8.29
5/8 .8634 10.36
3/4 1.036 12.43
7/8 1.209 14.51
1 1.382 16.58
1 1/4 1.727 20.72
1 1/2 2.072 24.86
1 3/4 2.418 29.02
2 2.763 33.16
2 1/2 3.454 41.45
3 4.145 49.74
3 1/2 4.835 58.02
4 5.526 66.31
1/2 x 5/8 1.151 13.81
3/4 1.382 16.58
7/8 1.612 19.34
1 1.842 22.10
1 1/4 2.303 27.64
1 1/2 2.763 33.16
1 3/4 3.224 38.69
Lbs. Est. lbs.THK Width per ft. 12' bar
349
1/2 x 2 3.684 44.21
2 1/4 4.163 49.96
2 1/2 4.605 55.26
3 5.526 66.31
3 1/2 6.447 77.36
4 7.368 88.42
4 1/2 8.289 99.47
5 9.210 110.50
5/8 x 3/4 1.727 20.72
7/8 2.015 24.18
1 2.303 27.64
1 1/4 2.387 28.64
1 1/2 3.454 41.45
1 3/4 4.029 48.35
2 4.605 55.26
2 1/2 5.756 69.07
3 6.908 82.90
4 9.210 110.50
3/4 x 1 2.763 33.16
1 1/4 3.454 41.45
1 1/2 4.145 49.74
2 5.526 66.31
2 1/4 6.217 74.60
2 1/2 6.908 82.90
3 8.289 99.47
4 11.05 132.60
BRASS RECTANGLESFree Cutting
Alloy 360ASTM B 16
Half HardLbs. Est. lbs.
THK Width per ft. 12' bar
350
BRASS RECTANGLESFree Cutting
Alloy 360ASTM B 16
Half Hard
1 x 1 1/4 4.605 55.26
1 1/2 5.526 66.31
1 3/4 6.447 77.36
2 7.368 88.42
2 1/4 8.289 99.47
2 1/2 9.210 110.5
3 11.05 132.6
3 1/2 12.89 154.7
4 14.74 176.9
1 1/4 x 1 1/2 6.908 82.9
1 3/4 8.059 96.7
2 9.210 110.5
2 1/2 11.51 138.1
3 13.82 165.8
4 18.42 221.0
1 1/2 x 2 11.05 132.6
2 1/2 13.82 165.8
3 16.58 199.0
4 22.10 265.2
Lbs. Est. lbs.THK Width per ft. 12' bar
351
NAVAL BRASS ROUNDSAlloy 464
ASTM B 21Half Hard
3/32 .0937 .025 .30
1/8 .1250 .045 .54
3/1616 .1875 .101 1.21
7/32 .2188 .138 1.66
1/4 .2500 .179 2.15
5/16 .3125 .280 3.36
3/8 .3750 .403 4.84
7/16 .4375 .548 6.58
1/2 .5000 .716 8.59
9/16 .5625 .907 10.90
5/8 .6250 1.120 13.40
11/16 .6875 1.350 16.20
3/4 .7500 1.610 19.30
13/16 .8125 1.890 22.70
7/8 .8750 2.190 26.30
15/16 .9375 2.520 30.20
1 1.000 2.870 34.40
1 1/16 1.063 3.230 38.80
1 1/8 1.125 3.630 43.60
1 3/16 1.188 4.040 48.50
1 1/4 1.250 4.480 53.80
1 5/16 1.313 4.940 59.30
1 3/8 1.375 5.420 65.00
1 7/16 1.438 5.920 71.00
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
352
1 1/2 1.500 6.45 77.4
1 9/16 1.563 6.99 83.9
1 5/8 1.625 7.57 90.8
1 3/4 1.750 8.77 105.0
1 7/8 1.875 10.10 121.0
2 2.000 11.50 138.0
2 1/8 2.125 12.90 155.0
2 1/4 2.250 14.50 174.0
2 3/8 2.375 16.20 194.0
2 1/2 2.500 17.90 215.0
2 5/8 2.625 19.70 236.0
2 3/4 2.750 21.70 260.0
2 7/8 2.875 23.70 284.0
3 3.000 25.80 310.0
3 1/4 3.250 30.30 Mill Lengths
3 1/2 3.500 35.10 Mill Lengths
3 3/4 3.750 40.30 Mill Lengths
4 4.000 45.80 Mill Lengths
4 1/4 4.250 51.80 Mill Lengths
4 1/2 4.500 58.00 Mill Lengths
5 5.000 71.60 Mill Lengths
5 1/4 5.250 79.00 Mill Lengths
5 1/2 5.500 86.70 Mill Lengths
6 6.000 103.0 Mill Lengths
NAVAL BRASS ROUNDSAlloy 464
ASTM B 21Half Hard
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
353
PHOSPHOR BRONZE ROUNDSFree Cutting
Alloy 544ASTM B 139
Half Hard
1/8 .1250 .0471 .565
5/32 .1562 .0737 .884
3/16 .1875 .1060 1.272
7/32 .2187 .1444 1.733
1/4 .2500 .1885 2.262
9/32 .2812 .2386 2.863
5/16 .3125 .2945 3.534
3/8 .3750 .4241 5.089
7/16 .4375 .5773 6.928
1/2 .5000 .7540 9.048
9/16 .5625 .8542 10.25
5/8 .6250 1.178 14.14
11/16 .6875 1.426 17.11
3/4 .7500 1.696 20.35
13/16 .8125 1.991 23.89
7/8 .8750 2.309 27.71
15/16 .9375 2.651 31.81
1 1.000 3.016 36.19
1 1/8 1.125 3.817 45.80
1 1/4 1.250 4.712 55.54
1 3/8 1.375 5.702 68.42
1 1/2 1.500 6.786 81.43
1 5/8 1.625 7.964 95.57
1 3/4 1.750 9.236 110.8
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
354
1/4 .2500 .1638 1.966
5/16 .3125 .2559 3.071
3/8 .3750 .3685 4.422
7/16 .4375 .5015 6.018
1/2 .5000 .6550 7.860
5/8 .6250 1.024 12.29
11/16 .6875 1.238 14.86
3/4 .7500 1.474 17.69
7/8 .8750 2.006 24.07
1 1.000 2.620 31.44
1 1/8 1.125 3.316 39.79
1 1/4 1.250 4.094 49.13
1 3/8 1.375 4.954 59.45
1 1/2 1.500 5.895 70.74
1 3/4 1.750 8.024 96.29
2 2.000 10.48 125.8
2 1/4 2.250 13.26 159.1
2 1/2 2.500 16.38 196.6
3 3.000 23.58 282.9
3 1/2 3.500 32.10 385.2
4 4.000 41.92 503.1
ALUMINUM SILICONBRONZE ROUNDS
Drawn and Stress Relieved Temper
Alloy 642ASTM B 150
Size in Decimal Lbs. Est. lbs.Inches Size per ft. 12' bar
355
SOLID BEARING BRONZE Continuous Cast
Alloy 932Formerly SAE 660
105" Lengths
3/8
1/2
5/8
3/4
7/8
1
1 1/8
1 1/4
1 3/8
1 1/2
1 5/8
1 3/4
1 7/8
2
2 1/8
2 1/4
2 3/8
2 1/2
2 5/8
2 3/4
2 7/8
3
3 1/4
3 1/2
3 3/4
.57
.92
1.37
1.95
2.63
3.32
4.24
5.15
6.18
7.33
8.59
9.96
11.45
12.94
14.54
16.26
18.09
20.04
22.10
24.16
26.45
28.74
33.70
38.90
44.70
5.0
8.0
12.0
17.0
23.0
29.0
37.0
45.0
54.0
64.0
75.0
87.0
100.0
113.0
127.0
142.0
158.0
175.0
193.0
211.0
231.0
251.0
294.0
340.0
390.0
NominalO.D.
Lbsper ft.
Lbsper bar
Cast with allowance “to finish”.
356
SOLID BEARING BRONZE Continuous Cast
Alloy 932Formerly SAE 660
105" Lengths
4
4 1/4
4 1/2
4 3/4
5
5 1/2
6
6 1/2
7
7 1/2
8
9
10
11
12
51.6
58.2
65.2
72.5
80.4
98.4
116.2
136.0
157.4
180.3
204.8
258.4
318.8
375.1
445.6
451
508
569
633
702
859
1015
1188
1375
1575
1789
2257
2784
3276
3892
NominalO.D.
Lbsper ft.
Lbsper bar
Cast with allowance “to finish”.
Also aavailable:
Hollow Bearing BronzeContinuous Cast
Alloy 932 formerly SAE 660
I.D. to 4”4 1/4” to 5”5 1/4” to 9”9 1/2” & over
-.025 to -.064-.052 to .-108-.074 to -.130-.100 to -.158
O.D. to 4”4 1/4” to 5”5 1/4” to 9”9 1/2” & over
+.027 to +.037+.056 to +.072+.062 to +.126+.100 to +.130
I.D. Tolerance +/- O.D. Tolerance +/-
O.D. Range
Wall Range
Lengths
1.00 thru 12.00”
.125” thru 2.500”
105 Inches
TUBE & PIPE
YARDE METALS
Aluminum
Tube & Pipe Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 357
Round: 6061 drawn . . . . . . . . . . . . . . . 358 - 3626061 extruded . . . . . . . . . . . . . 363 - 374
Pipe: 6061 . . . . . . . . . . . . . . . . . . . . . 375 - 377
Square: 6061, 6063 . . . . . . . . . . . . . . . . 378 - 380
Rectangle: 6061, 6063 . . . . . . . . . . . . . . . . 381 - 383
Stainless
Tube & Pipe Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 384
Round: 304, 316 . . . . . . . . . . . . . . . . . . 385 - 389
Pipe: 304, 316. . . . . . . . . . . . . . . . . . . . . . .391
Square: 304 . . . . . . . . . . . . . . . . . . . . . . 392 - 394
Rectangle: 304 . . . . . . . . . . . . . . . . . . . . . . 395 - 397
Decimal Equivalents & B.W.G Gauges. . . . . . . . . . . . . . . . . . . . . . 390
Carbon
Tube & Pipe Guide . . . . . . . . . . . . . . . . . . . . . 398 - 399
Round: CREW, HREW, DOM . . . . . . . . . . 400 - 408
Pipe: ERW, SMLS . . . . . . . . . . . . . . . .409 - 410
Square: ASTM A 500 & 513 . . . . . . . . . . . .411 - 414
Rectangle: ASTM A 500 & 513 . . . . . . . . . . . .415 - 420
TUBE & PIPEPages
TU
BE
AN
D P
IPE
ALUMINUM GUIDEto
TUBE and PIPE
2024 High strength alloy with excellent fatigue
resistance and machinability. Known widely as an
“aircraft” alloy for strength but not noted for corrosion
resistance.
6061 Is the most popular and versatile aluminum alloy.
This heat treatable grade is weldable and has good
strength and corrosion resistance. Extruded can be sup-
plied in either the structural or seamless condition.
Usually light wall sections are in the drawn condition.
6063 Is the “architectural grade” with slightly less
strength than 6061, but is better suited for anodizing.
Most popular in square and rectangular sections.
7075 One of the highest strength grades used mainly
in aircraft applications.
357
358
3/16 x .028 .132 .011
.035 .118 .020
.049 .090 .026
1/4 x .028 .194 .023
.035 .180 .028
.049 .152 .036
.058 .134 .041
.065 .120 .059
5/16 x .028 .256 .029
.035 .242 .044
.049 .215 .048
.058 .197 .055
.065 .183 .061
3/8 x .028 .379 .037
.035 .305 .044
.049 .277 .059
.058 .259 .068
.065 .245 .074
.083 .209 .089
7/16 x .035 .368 .053
.049 .339 .070
.065 .308 .090
1/2 x .028 .444 .409
.035 .430 .060
.049 .402 .082
.058 .384 .095
.065 .370 .105
.083 .334 .128
.095 .310 .142
.120 .260 .168
Nominal Est. lbs.O.D. Wall I.D. per ft.
ALUMINUM DRAWN TUBINGSeamless
6061-T6
ASTM B 210 AMS 4082 WW T 700/6
OD
Wall
359
Nominal Est. lbs.O.D. Wall I.D. per ft.
5/8 x .028 .569 .062
.035 .555 .076
.049 .527 .104
.058 .509 .122
.065 .495 .135
.083 .459 .166
.125 .375 .231
.156 .313 .270
3/4 x .028 .694 .075
.035 .680 .093
.049 .652 .127
.058 .634 .148
.065 .620 .164
.083 .580 .205
.095 .560 .237
.125 .500 .279
7/8 x .035 .805 .109
.049 .777 .150
.058 .759 .175
.065 .745 .194
.095 .685 .274
.120 .635 .340
ALUMINUM DRAWN TUBINGSeamless
6061-T6
ASTM B 210 AMS 4082 WW T 700/6
OD
Wall
360
1 x .028 .944 .101
.035 .930 .125
.049 .902 .172
.058 .884 .202
.065 .870 .225
.083 .834 .281
.095 .810 .324
.125 .750 .404
1 1/8 x .035 1.055 .141
.049 1.027 .195
.058 1.009 .229
.065 .995 .255
.083 .959 .345
.095 .935 .362
1 1/4 x .035 1.180 .157
.049 1.152 .217
.058 1.134 .255
.065 1.120 .285
.083 1.084 .358
.095 1.060 .400
.125 1.000 .530
Nominal Est. lbs.O.D. Wall I.D. per ft.
ALUMINUM DRAWN TUBINGSeamless
6061-T6
ASTM B 210 AMS 4082 WW T 700/6
OD
Wall
361
1 3/8 x .035 1.305 .173
.049 1.277 .240
.058 1.259 .282
.065 1.245 .315
.083 1.209 .358
.095 1.060 .400
.125 1.000 .530
1 1/2 x .035 1.430 .189
.049 1.402 .263
.058 1.384 .309
.065 1.370 .345
.083 1.334 .435
.095 1.310 .527
.125 1.250 .635
1 5/8 x .049 1.527 .290
.058 1.509 .336
.125 1.375 .703
.250 1.125 1.272
1 3/4 x .049 1.652 .314
.058 1.634 .363
.065 1.620 .413
.083 1.584 .511
1 7/8 x .035 1.805 .239
.049 1.770 .331
.058 1.759 .395
.083 1.709 .550
Nominal Est. lbs.O.D. Wall I.D. per ft.
ALUMINUM DRAWN TUBINGSeamless
6061-T6
ASTM B 210 AMS 4082 WW T 700/6
OD
Wall
2 x .035 1.930 .259
.049 1.902 .353
.058 1.884 .426
.065 1.870 .465
.083 1.834 .588
2 1/8 x .065 1.995 .465
2 1/4 x .049 2.152 .406
.065 2.120 .533
.083 1.959 .660
2 1/2 x .049 2.402 .451
.065 2.370 .580
.083 2.334 .740
2 3/4 x .065 2.620 .580
3 x .035 2.930 .383
.049 2.902 .700
.065 2.870 .705
.125 2.750 1.329
3 1/2 x .065 3.370 .825
4 x .065 3.870 .945
.125 3.750 1.790
5 x .065 4.870 1.187
Nominal Est. lbs.O.D. Wall I.D. per ft.
ALUMINUM DRAWN TUBINGSeamless
6061-T6
ASTM B 210 AMS 4082 WW T 700/6
362
OD
Wall
363
3/4 x .065 .620 .168
.125 .500 .289
7/8 x .156 .563 .415
1 x .065 .870 .224
.125 .750 .410
.188 .625 .564
.250 .500 .700
1 1/8 x .125 .875 .462
.250 .625 .809
1 1/4 x .062 1.126 .285
.125 1.000 .520
.188 .875 .737
.250 .750 .940
1 3/8 x .125 1.125 .580
.250 .875 1.039
1 1/2 x .062 1.376 .332
.065 1.370 .345
.125 1.250 .635
.188 1.125 .910
.250 1.000 1.155
.375 .750 1.559
1 5/8 x .125 1.375 .694
.250 1.125 1.272
1 3/4 x .125 1.500 .770
.188 1.375 1.090
.250 1.250 1.410
.375 1.000 1.905
.500 .750 2.301
Nominal Est.lbs.O.D. Wall I.D. per ft.
ALUMINUM ROUND TUBINGExtruded
6061-T6511
Seamless Structural
AMS QQ A 200/8 AMS QQ A 200/8
ASTM B 221 ASTM B 221
ASTM B 241 ASTM B 429
12 & 24 FT. lengths
OD
Wall
364
2 x .062 1.876 .465
.065 1.870 .465
.125 1.750 .866
.188 1.625 1.259
.250 1.500 1.616
.375 1.250 2.250
.500 1.000 2.800
2 1/4 x .065 2.120 .535
.125 2.000 .981
.188 1.870 1.432
.250 1.750 1.900
.375 1.500 2.600
.500 1.250 3.233
2 3/8 x .125 2.125 1.060
.375 1.620 2.771
2 1/2 x .065 2.370 .584
.125 2.250 1.097
.188 2.125 1.642
.250 2.000 2.078
.375 1.750 2.960
.500 1.500 3.695
.750 1.000 4.848
2 3/4 x .125 2.500 1.212
.188 2.375 1.710
.250 2.250 2.310
.375 2.000 3.290
.500 1.750 4.152
.750 1.250 5.542
Nominal Est.lbs.O.D. Wall I.D. per ft.
ALUMINUM ROUND TUBINGExtruded
6061-T6511
Seamless Structural
AMS QQ A 200/8 AMS QQ A 200/8
ASTM B 221 ASTM B 221
ASTM B 241 ASTM B 429
12 & 24 FT. lengths
OD
Wall
365
2 7/8 x .500 1.875 4.388
3 x .065 2.875 .705
.095 2.810 1.022
.125 2.750 1.328
.188 2.625 1.950
.250 2.500 2.540
.375 2.250 3.700
.500 2.000 4.618
.750 1.500 6.234
1.000 1.000 7.400
3 1/8 x .125 2.875 1.387
3 1/4 x .125 3.000 1.440
.250 2.750 2.771
.375 2.500 3.983
.500 2.250 5.080
.750 1.750 6.928
1.000 1.250 8.313
Nominal Est.lbs.O.D. Wall I.D. per ft.
ALUMINUM ROUND TUBINGExtruded
6061-T6511
Seamless Structural
AMS QQ A 200/8 AMS QQ A 200/8
ASTM B 221 ASTM B 221
ASTM B 241 ASTM B 429
12 & 24 FT. lengths
OD
Wall
366
3 1/2 x .125 3.250 1.619
.250 3.000 3.020
.375 2.750 4.330
.500 2.500 5.542
.750 2.000 6.004
1.000 1.500 9.236
3 3/4 x .188 3.375 2.471
.250 3.250 3.232
.313 3.125 3.963
.375 3.000 4.700
.500 2.750 6.004
.750 2.250 8.310
1.000 1.750 10.160
4 x .125 3.750 1.788
.250 3.500 3.464
.375 3.250 5.022
.500 3.000 6.465
.625 2.750 7.793
.750 2.500 9.005
1.000 2.000 11.310
1.500 1.000 13.850
Nominal Est.lbs.O.D. Wall I.D. per ft.
ALUMINUM ROUND TUBINGExtruded
6061-T6511
Seamless Structural
AMS QQ A 200/8 AMS QQ A 200/8
ASTM B 221 ASTM B 221
ASTM B 241 ASTM B 429
12 & 24 FT. lengths
OD
Wall
367
4 1/4 x .125 4.00 1.91
.250 3.75 3.70
.375 3.50 5.38
.500 3.25 6.96
.750 2.75 9.70
1.000 2.25 12.07
1.500 1.25 15.24
4 1/2 x .125 4.25 1.94
.188 4.13 2.99
.250 4.00 4.09
.375 3.75 6.00
.500 3.50 7.39
.750 3.00 10.39
1.000 2.50 12.90
1.500 1.50 16.62
4 3/4 x .500 3.75 7.90
.750 3.25 10.50
1.000 2.75 13.85
1.500 1.75 18.08
Nominal Est.lbs.O.D. Wall I.D. per ft.
ALUMINUM ROUND TUBINGExtruded
6061-T6511
Seamless Structural
AMS QQ A 200/8 AMS QQ A 200/8
ASTM B 221 ASTM B 221
ASTM B 241 ASTM B 429
12 & 24 FT. lengths
OD
Wall
368
ALUMINUM ROUND TUBINGExtruded
6061-T6511
Seamless Structural
AMS QQ A 200/8 AMS QQ A 200/8
ASTM B 221 ASTM B 221
ASTM B 241 ASTM B 429
12 & 24 FT. lengths
Nominal Est.lbs.O.D. Wall I.D. per ft.
5 x .125 4.75 2.25
.188 4.63 3.39
.250 4.50 4.50
.375 4.25 6.41
.500 4.00 8.31
.750 3.50 11.78
1.000 3.00 14.78
1.500 2.00 19.39
5 1/4 x .250 4.75 4.63
.500 4.25 8.96
.750 3.75 12.47
1.000 3.25 15.70
1.438 2.38 20.25
1.750 1.75 22.63
5 1/2 x .125 5.25 2.49
.250 5.00 4.85
.375 4.75 7.11
.500 4.50 9.24
.750 4.00 13.16
1.000 3.50 16.63
1.500 2.50 20.25
5 3/4 x 1.000 3.75 17.58
6 x .125 5.75 2.70
.250 5.50 5.31
.375 5.25 7.65
.500 5.00 10.16
.750 4.50 14.55
1.000 4.00 18.47
1.500 3.00 24.94
2.000 2.00 29.60
OD
Wall
ALUMINUM ROUND TUBINGExtruded
6061-T6 6061-T6511
Seamless Structural
AMS QQ A 200/8 AMS QQ A 200/8
ASTM B 221 ASTM B 221
ASTM B 241 ASTM B 429
12 & 24 FT. lengths
Nominal Est.lbs.O.D. Wall I.D. per ft.
6 1/8 x 1.063 4.00 19.87
6 1/4 x .125 6.00 2.83
.500 5.25 10.63
.750 4.75 14.80
1.000 4.25 19.43
1.500 3.25 24.94
6 1/2 x .130 6.25 3.06
.250 6.00 5.90
.500 5.50 11.08
.750 5.00 16.00
1.000 4.50 20.32
1.250 4.00 24.28
1.500 3.50 27.75
2.000 2.50 33.30
6 3/4 x .750 5.25 16.65
7 x .125 6.75 3.18
.250 6.50 6.33
.375 6.25 9.18
.500 6.00 12.01
.750 5.50 17.32
1.000 5.00 22.17
1.500 4.00 30.50
2.250 2.50 39.54
7 1/8 x 1.188 4.75 26.10
1.313 4.50 28.24
369
OD
Wall
370
7 1/2 x .250 7.00 6.70
.375 6.75 9.37
.500 6.50 12.93
.750 6.00 17.32
1.000 5.50 22.17
1.500 4.50 33.25
2.000 3.50 35.31
7 3/4 x 1.000 5.75 24.94
7.900 x 1.750 4.40 39.82
Nominal Est.lbs.O.D. Wall I.D. per ft.
ALUMINUM ROUND TUBINGExtruded
6061-T6 6061-T6511
Seamless Structural
AMS QQ A 200/8 AMS QQ A 200/8
ASTM B 221 ASTM B 221
ASTM B 241 ASTM B 429
12 & 24 FT. lengths
In-house volume cutting reduces total costs.
OD
Wall
8 x .125 7.75 3.64
.250 7.50 7.31
.375 7.25 10.58
.500 7.00 13.85
.750 6.50 20.09
1.000 6.00 25.86
1.500 5.00 36.02
2.000 4.00 44.33
8 1/8 x .625 6.88 17.34
8 1/4 x .500 7.25 14.32
.625 7.00 17.61
1.188 5.88 30.99
8.30 x .375 7.55 10.98
8 1/2 x .125 8.25 3.87
.500 7.50 14.78
.750 7.00 21.47
1.000 6.50 27.71
1.500 5.50 38.79
2.000 4.50 48.02
Nominal Est.lbs.O.D. Wall I.D. per ft.
ALUMINUM ROUND TUBINGExtruded
6061-T6 6061-T6511
Seamless Structural
AMS QQ A 200/8 AMS QQ A 200/8
ASTM B 221 ASTM B 221
ASTM B 241 ASTM B 429
12 & 24 FT. lengths
371
OD
Wall
9 x .125 8.75 4.10
.250 8.50 8.09
.375 8.25 11.97
.500 8.00 15.70
.750 7.50 22.86
1.000 7.00 29.56
1.500 6.00 41.63
2.000 5.00 51.73
9 1/4 x .125 9.00 42.20
9 1/2 x .125 9.25 4.34
.250 9.00 8.56
.375 8.75 12.66
.500 8.50 16.63
.750 8.00 24.22
1.000 7.50 31.40
1.250 7.00 38.16
1.500 6.50 44.40
2.000 5.00 55.42
10 x .125 9.75 4.57
.250 9.50 9.14
.375 9.25 13.35
.500 9.00 17.91
.625 8.75 21.65
.750 8.50 25.63
1.000 8.00 33.25
1.500 7.00 33.33
2.000 6.00 59.20
2.188 5.63 63.23
Nominal Est.lbs.O.D. Wall I.D. per ft.
ALUMINUM ROUND TUBINGExtruded
6061-T6 6061-T6511
Seamless Structural
AMS QQ A 200/8 AMS QQ A 200/8
ASTM B 221 ASTM B 221
ASTM B 241 ASTM B 429
12 & 24 FT. lengths
372
OD
Wall
373
10 1/2 x .125 10.25 4.80
.250 10.00 9.48
.375 9.75 14.05
.500 9.50 17.60
.750 9.00 27.06
1.000 8.50 35.10
1.625 7.25 53.28
1.750 7.00 56.66
2.000 6.50 60.50
10 3/4 x .500 9.75 18.93
.625 9.50 23.38
1.000 8.75 36.08
11 x .125 10.75 5.03
.250 10.50 9.94
.375 10.25 14.74
.500 10.00 19.40
.750 9.50 28.40
1.000 9.00 37.72
1.500 8.00 52.70
2.000 7.00 67.86
11 1/4 x 1.375 8.50 50.16
11 1/2 x .125 11.25 5.26
.250 11.00 10.40
.375 10.75 15.44
.500 10.50 20.32
.750 10.00 29.20
1.000 9.50 39.59
1.500 8.50 55.42
2.000 7.00 71.63
Nominal Est.lbs.O.D. Wall I.D. per ft.
ALUMINUM ROUND TUBINGExtruded
6061-T6 6061-T6511
Seamless Structural
AMS QQ A 200/8 AMS QQ A 200/8
ASTM B 221 ASTM B 221
ASTM B 241 ASTM B 429
12 & 24 FT. lengths
OD
Wall
12 x .125 11.75 5.49
.250 11.50 10.85
.375 11.25 16.13
.500 11.00 21.24
.750 10.50 30.40
1.000 10.00 40.63
1.500 9.00 58.28
2.000 8.00 73.89
12 1/2 x 1.250 10.00 52.03
2.500 7.50 92.35
12 3/4 x .500 11.75 23.09
1.000 10.75 43.48
13 x .500 12.50 23.13
1.000 11.50 44.40
1.500 10.50 63.83
2.000 9.50 81.40
13 1/2 x 2.000 9.50 85.10
14 x .375 13.25 18.90
.500 13.00 24.94
1.000 12.00 49.01
1.500 11.00 69.27
14.170 x 2.165 9.84 96.17
15 x .500 14.00 26.79
1.000 13.00 52.78
1.500 12.00 74.80
16 x .500 15.00 28.64
1.000 14.00 56.55
1.500 13.00 80.48
16.140 x 2.165 11.81 111.95
18.110 x 2.165 13.78 127.70
Nominal Est.lbs.O.D. Wall I.D. per ft.
ALUMINUM ROUND TUBINGExtruded
6061-T6 6061-T6511
Seamless Structural
AMS QQ A 200/8 AMS QQ A 200/8
ASTM B 221 ASTM B 221
ASTM B 241 ASTM B 429
12 & 24 FT. lengths
374
OD
Wall
375
1/8 40 .405 .068 .269 .08
1/4 40 .540 .088 .364 .14
1/4 80 .540 .119 .302 .18
3/8 40 .675 .091 .493 .20
80 .675 .126 .423 .26
*1/2 40 .840 .109 .622 .29
80 .840 .147 .546 .38
*3/4 40 1.050 .113 .824 .39
80 1.050 .154 .742 .51
*1 40 1.315 .133 1.049 .58
80 1.315 .179 .957 .75
*1 1/4 10 1.660 .109 1.442 .63
40 1.660 .140 1.380 .79
80 1.660 .191 1.280 1.04
*1 1/2 5 1.900 .065 1.770 .44
40 1.900 .145 1.610 .94
80 1.900 .200 1.500 1.26
Pipe Schedule Outside Wall Inside Est. lbs.Size Number Diameter Thickness Diameter per ft.
ALUMINUM PIPEExtruded
6061-T6
Seamless Structural
AMS QQ A 200/8 AMS QQ A 200/8
ASTM B 221 ASTM B 221
ASTM B 241 ASTM B 429
20 Ft. Lengths
* Available in 6063-T42, 6063-T52, 6063-T6
OD
Wall
*2 10 2.375 .109 2.157 .91
40 2.375 .154 2.067 1.26
80 2.375 .218 1.939 1.74
2 1/2 40 2.875 .203 2.469 2.00
80 2.875 .276 2.323 2.65
3 40 3.500 .216 3.068 2.62
80 3.500 .300 2.900 3.55
3 1/2 40 4.000 .226 3.548 3.15
80 4.000 .318 3.364 4.33
4 10 4.500 .120 4.260 1.94
40 4.500 .237 4.026 3.73
80 4.500 .337 3.826 5.18
5 5 5.563 .109 5.345 2.20
10 5.563 .134 5.295 2.69
40 5.563 .258 5.047 5.06
80 5.563 .375 4.813 7.18
376
Pipe Schedule Outside Wall Inside Est. lbs.Size Number Diameter Thickness Diameter per ft.
ALUMINUM PIPEExtruded
6061-T6
Seamless Structural
AMS QQ A 200/8 AMS QQ A 200/8
ASTM B 221 ASTM B 221
ASTM B 241 ASTM B 429
20 Ft. Lengths
* Available in 6063-T42, 6063-T52, 6063-T6
OD
Wall
377
6 40 6.625 .280 6.065 6.56
80 6.625 .432 5.761 9.88
8 40 8.625 .322 7.981 9.88
80 8.625 .500 7.625 15.01
10 40 10.75 .365 10.02 14.00
80 10.75 .500 9.75 18.93
12 40 12.75 .375 12.00 17.15
80 12.75 .688 11.37 30.62
14 40 14.00 .375 13.25 18.90
Pipe Schedule Outside Wall Inside Est. lbs.Size Number Diameter Thickness Diameter per ft.
ALUMINUM PIPEExtruded
6061-T6
Seamless Structural
AMS QQ A 200/8 AMS QQ A 200/8
ASTM B 221 ASTM B 221
ASTM B 241 ASTM B 429
20 Ft. Lengths
OD
Wall
ALUMINUM SQUARE TUBINGExtruded
6061-T6ASTM B 221
12 & 24 Ft. Lengths
378
X Y t Wall Lbs. Est. lbs.Dimension Thickness per ft. 24' length
3/4 x .062 .205 4.92
.125 .376 9.02
1 x .062 .280 6.72
.125 .526 12.62
1 1/4 x .125 .670 16.18
1 1/2 x .125 .810 19.42
.188 1.140 27.36
.250 1.500 36.00
2 x .125 1.130 27.12
.188 1.600 38.44
.250 2.100 50.40
2 1/2 x .125 1.400 33.50
.250 2.700 64.80
3 x .125 1.730 41.52
.188 2.540 60.93
.250 3.300 79.20
.375 4.631 87.12
4 x .188 3.440 82.60
.250 4.500 108.00
.500 8.230 197.50
6 x .250 6.770 162.50
.500 13.200 316.80
379
ALUMINUM SQUARE TUBINGExtruded
6063-T52ASTM B 221
24 Ft. Lengths
X Y t Wall Lbs. Est. lbs.Dimension Thickness per ft. 24' length
1/2 x .062 .130 3.12
5/8 x .062 .167 4.01
3/4 x .062 .200 4.80
.125 .365 8.76
1 x .062 .262 6.28
.125 .515 12.35
1 1/8 x .062 .316 7.58
1 1/4 x .062 .354 8.50
.125 .662 15.87
1 1/2 x .062 .420 10.08
.078 .532 12.77
.125 .809 19.40
.188 1.160 27.84
1 3/4 x .125 .956 22.93
2 x .125 1.100 26.47
.188 1.600 38.44
.250 2.060 49.39
2 1/2 x .075 .883 21.19
.125 1.400 33.52
Consider the possibilities of using a Custom Extrusion.
ALUMINUM SQUARE TUBINGExtruded
6063-T52ASTM B 221
24 Ft. Lengths
X Y t Wall Lbs. Est. lbs.Dimension Thickness per ft. 24' length
3 x .125 1.69 40.58
.188 2.49 59.68
.250 3.23 77.61
3 1/2 x .125 1.88 45.00
4 x .125 2.28 54.67
.188 3.44 82.56
.250 4.41 105.80
5 x .125 2.92 70.08
.250 5.59 134.00
6 x .125 3.53 84.60
.250 6.90 165.60
8 x .188 6.78 162.70
Eliminate machining operations by using ourExtrusion Department to assist you on future designs.
380
381
ALUMINUMRECTANGULAR TUBING
Extruded
6061-T6AMS QQA 200/8 ASTM B 221
24 FT. Lengths
1 x 2 .125 .824 19.77
1 1/4 x 2 .250 1.617 38.80
1 1/2 x 2 .125 .976 23.42
3 .1875 1.861 44.66
2 x 3 .125 1.426 34.22
.250 2.646 63.50
4 .125 1.725 41.40
.250 3.172 76.13
5 .125 2.026 48.62
4 x 6 .250 5.700 136.80
.500 10.580 253.90
X Y t Wall Lbs. Est. lbs.Dimension Dimension Thickness per ft. 24' length
382
ALUMINUMRECTANGULAR TUBING
Extruded
6063-T52ASTM B 221
24 FT. Lengths
1/2 x 1 .125 .368 8.82
1 3/4 .098 .483 11.60
3/4 x 1 1/2 .125 .588 14.11
1 x 1 1/2 .125 .662 15.88
2 .125 .809 19.41
3 .063 .577 13.84
.125 1.130 27.12
4 .125 1.397 33.52
1 1/4 x 2 1/2 .125 1.040 24.96
3 .125 1.050 25.20
1 1/2 x 2 .125 .956 22.94
2 1/2 .125 1.103 26.47
3 .125 1.272 30.53
4 .125 1.574 37.77
6 .125 2.176 52.22
1 3/4 x 2 1/4 .125 1.125 27.00
3 .125 1.324 31.77
3 1/2 .125 1.470 35.28
4 .125 1.617 38.80
4 1/2 .125 1.780 42.72
5 .125 1.911 45.86
2 x 3 .125 1.410 33.84
4 .125 1.690 40.56
5 .125 1.985 47.64
6 .125 2.279 54.96
8 .125 2.925 70.20
X Y t Wall Lbs. Est. lbs.Dimension Dimension Thickness per ft. 24' length
383
3 x 4 .125 2.01 48.28
5 .125 2.28 54.69
6 .125 2.56 61.51
6 .188 3.81 91.54
4 x 6 .125 2.87 68.80
6 .250 5.70 136.80
8 .250 6.76 162.30
X Y t Wall Lbs. Est. lbs.Dimension Dimension Thickness per ft. 24' length
ALUMINUMRECTANGULAR TUBING
Extruded
6063-T52ASTM B 221
24 FT. Lengths
Specially Designed Extrusion - liberal on the outsidecorners and tighter radius on the inside.
STAINLESS GUIDEto
TUBE and PIPE
304 Is carried in both seamless and welded conditions,
it is non-magnetic, has good corrosion and heat resist-
ance. Available in round, squares and rectangular forms.
304L Is the extra low carbon (.03 max) variety of 304
intended for welding applications.
316 With the addition of molybdenum the corrosion
resistance of the grade is greatly increased.
316L Is the extra low carbon (.03 max) variety of 316,
intended for welding application.
321 & 347 Are grades that have increased resistance to
intergranular corrosion with the additions of titanium and
columbium.
384
385
1/8 x .028 .069 .0290
.035 .055 .0336
3/16 x .028 .132 .0478
.035 .118 .0572
1/4 x .028 .194 .0478
.035 .180 .0804
.049 .152 .1052
.058 .134 .1189
.065 .120 .1284
5/16 x .028 .257 .0852
.035 .243 .1039
.049 .215 .1382
.065 .183 .1722
3/8 x .028 .319 .1038
.035 .305 .1271
.049 .277 .1706
.065 .245 .2152
.083 .209 .2588
7/16 x .035 .368 .1506
.049 .340 .2036
.065 .308 .2589
1/2 x .028 .444 .1411
.035 .430 .1738
.049 .402 .2360
.058 .384 .2738
.065 .370 .3020
.083 .334 .3696
.095 .310 .4110
.120 .260 .4900
.156 .188 .5770
Wall Nominal Est. lbs.O.D. Decimal I.D. per ft.
STAINLESS ROUND TUBINGWelded and Seamless
304 316
ASTM A 213 ASTM A 249 ASTM A 269
Pink -Color- Purple
Stock Lengths: 17 to 24 Ft.
* See decimal equivalents and B.W.G. gauges on page 390.
OD
Wall
386
5/8 x .028 .569 .1785
.035 .555 .2205
.049 .527 .3014
.065 .495 .3888
.083 .459 .4810
.095 .435 .5377
.120 .385 .6470
.156 .313 .7814
3/4 x .035 .680 .2673
.049 .652 .3688
.065 .620 .4755
.083 .584 .5910
.120 .510 .8074
.188 .374 1.1280
7/8 x .035 .805 .3140
.049 .777 .4323
.065 .745 .5623
.095 .685 .7910
.120 .635 .9676
.188 .745 1.6300
.250 .635 2.0030
1 x .035 .930 .3607
.049 .902 .4977
.058 .884 .5841
.065 .870 .6491
.083 .834 .8129
.095 .810 .9180
.120 .760 1.1280
.156 .688 1.4060
.188 .624 1.6300
.250 .500 2.0030
STAINLESS ROUND TUBINGWelded and Seamless
304 316
ASTM A 213 ASTM A 249 ASTM A 269
Pink -Color- Purple
Stock Lengths: 17 to 24 Ft.
Wall Nominal Est. lbs.O.D. Decimal I.D. per ft.
* See decimal equivalents and B.W.G. gauges on page 390.
OD
Wall
387
1 1/4 x .035 1.180 .4542
.049 1.152 .6285
.065 1.120 .8226
.083 1.084 1.0340
.120 1.010 1.4480
.156 .938 1.8226
.188 .874 2.1320
.250 .750 2.6700
1 5/16 x .095 1.125 1.2352
1 3/8 x .049 1.277 .6939
.065 1.245 .9094
.083 1.209 1.1450
.120 1.135 1.6080
.188 .999 2.3830
.250 .875 3.0100
1 1/2 x .035 1.430 .5746
.049 1.402 .7593
.065 1.370 .9962
.083 1.334 1.2560
.120 1.260 1.7690
.188 1.120 2.6340
.250 1.000 3.3380
1 5/8 x .065 1.495 1.0830
.120 1.385 1.9500
.188 1.249 2.6340
.250 1.125 3.6710
STAINLESS ROUND TUBINGWelded and Seamless
304 316
ASTM A 213 ASTM A 249 ASTM A 269
Pink -Color- Purple
Stock Lengths: 17 to 24 Ft.
Wall Nominal Est. lbs.O.D. Decimal I.D. per ft.
* See decimal equivalents and B.W.G. gauges on page 390.
OD
Wall
388
1 3/4 x .035 1.680 .6410
.049 1.652 .8900
.065 1.620 1.1700
.083 1.584 1.4770
.120 1.510 2.0890
.188 1.120 2.6340
.250 1.250 4.0050
2 x .035 1.930 .7320
.049 1.902 1.2010
.065 1.870 1.3430
.083 1.834 1.6990
.120 1.760 2.4090
.188 1.624 3.6380
.250 1.500 4.6730
.312 1.376 5.6240
.375 1.250 6.5080
.500 1.000 8.0100
2 1/4 x .065 2.120 1.5170
.120 2.010 2.7290
.188 1.120 2.6340
.250 1.000 3.3380
.375 1.500 7.5090
.500 1.250 9.3450
2 1/2 x .049 2.402 1.2830
.065 2.370 1.6900
.083 2.334 2.1430
.120 2.260 3.0500
.188 2.124 4.6420
.250 2.000 6.0080
.375 1.750 8.5106
STAINLESS ROUND TUBINGWelded and Seamless
304 316
ASTM A 213 ASTM A 249 ASTM A 269
Pink -Color- Purple
Stock Lengths: 17 to 24 Ft.
Wall Nominal Est. lbs.O.D. Decimal I.D. per ft.
* See decimal equivalents and B.W.G. gauges on page 390.
OD
Wall
389
2 3/4 x .120 2.510 3.3710
.250 2.250 6.6750
3 x .065 2.870 2.0370
.0832 .834 2.5860
.109 2.782 3.3650
.120 2.760 3.6910
.188 2.624 5.6460
.250 2.500 7.3430
3 1/2 .250 3.000 8.6780
.375 2.750 12.5150
4 x .065 3.870 2.7320
.083 3.834 3.4720
.120 3.760 4.9730
.188 3.624 7.6800
.250 3.500 10.0100
.375 3.250 14.5200
5 1/4 x .250 4.750 13.3500
STAINLESS ROUND TUBINGWelded and Seamless
304 316
ASTM A 213 ASTM A 249 ASTM A 269
Pink -Color- Purple
Stock Lengths: 17 to 24 Ft.
Wall Nominal Est. lbs.O.D. Decimal I.D. per ft.
* See decimal equivalents and B.W.G. gauges on page 390.
OD
Wall
REFERENCE GUIDEDECIMAL EQUIVALENTS AND B.W.G. GAUGES
30 .012
29 .013
28 .014
1/64 .0156
27 .016
26 .018
25 .020
24 .022
23 .025
22 .028
1/32 .0312
21 .032
20 .035
19 .042
3/64 .0468
18 .049
17 .058
1/16 .0625
16 .065
15 .072
5/64 .0781
14 .083
3/32 .0937
13 .095
12 .109
11 .120
1/8 .125
10 .134
9/64 .1406
9 .148
5/32 .1562
17/32 .5312
5/64 .5468
9 /16 .5625
37/64 .5781
19/32 .5937
39/64 .6093
5/8 .6250
41/64 .6406
21/32 .6562
43/64 .6718
11/16 .6875
45/64 .7031
23/32 .7187
47/64 .7343
3/4 .750
49/64 .7656
25/32 .7812
51/64 .7968
13/16 .8125
53/64 .8281
27/32 .8437
55/64 .8593
7/8 .8750
57/64 .8906
29/32 .9062
59/64 .9218
15/16 .9375
61/64 .9531
31/32 .9687
63/64 .9843
1 1.0000
390
8 .165
11/64 .1718
7 .180
3/16 .1875
6 .203
13/64 .2031
7/32 .2187
5 .220
15/64 .2343
4 .238
1/4 .250
3 .259
17/64 .2656
9/32 .2812
2 .284
19/64 .2968
1 .300
5/16 .3125
21/64 .3281
0 .340
11/32 .3437
23/64 .3593
3/8 .375
25/64 .3906
13/32 .4062
27/64 .4218
7/16 .4375
29/64 .4531
15/36 .4687
31/64 .4843
1/2 .500
33/64 .5156
391
1/4 40 .54 .088 .364 .430
80 .54 .119 .302 .540
3/8 40 .675 .091 .493 .570
80 .675 .126 .423 .750
1/2 40 .84 .109 .622 .860
80 .84 .147 .546 1.100
3/4 40 1.05 .113 .824 1.140
80 1.05 .154 .742 1.490
1 40 1.315 .133 1.049 1.700
80 1.315 .179 .957 2.190
1 1/4 40 1.66 .140 1.380 2.270
80 1.66 .191 1.287 3.030
1 1/2 40 1.90 .145 1.610 2.740
80 1.90 .200 1.500 3.670
2 40 2.375 .154 2.067 3.700
80 2.375 .218 1.939 5.070
2 1/2 40 2.875 .203 2.469 5.850
80 2.875 .276 2.323 7.660
3 40 3.500 .216 3.068 7.580
80 3.500 .300 2.900 10.250
3 1/2 40 4.000 .226 3.548 9.110
80 4.000 .318 3.364 12.500
4 40 4.500 .237 4.026 10.790
80 4.500 .337 3.826 14.980
Pipe Schedule Outside Wall Inside Est. lbs.Size Number Diameter Thickness Diameter per ft.
"L" grades available in some sizes.Schedule 5 - 10 available upon request.
STAINLESS PIPEWelded and Seamless
304 316
ASTM A 312
Pink -Color- Purple
20 Ft. Lengths
OD
Wall
392
1/2 x 18 .049 .304
16 .065 .370
5/8 x 18 .049 .389
16 .065 .481
3/4 x 20 .035 .345
18 .049 .473
16 .065 .616
14 .083 .763
11 .120 .970
1 x 20 .035 .459
18 .049 .642
16 .065 .817
14 .083 1.048
12 .109 1.338
11 .120 1.418
1 1/4 x 18 .049 .812
16 .065 1.040
14 .083 1.334
12 .109 1.713
11 .120 1.823
STAINLESS SQUARE TUBINGOrnamental & Structural
304ASTM A 554
Stock Lengths: 20 to 24 Ft.
Color: Pink
X Y t Wall Est. lbs.Dimension Gage Decimal per ft.
Available in various polished surface finishes.
393
Available in various polished surface finishes.
X Y t Wall Est. lbs.Dimension Gage Decimal per ft.
1 1/2 x 18 .049 .980
16 .065 1.264
14 .083 1.621
12 .109 2.018
11 .120 2.254
3/16 .180 3.116
1 3/4 x 16 .065 1.479
14 .083 1.881
12 .109 2.433
11 .120 2.660
2 x 18 .049 1.317
16 .065 1.710
14 .083 2.164
3/16 .180 4.460
1/4 .250 6.010
2 1/2 x 16 .065 2.185
14 .083 2.730
12 .109 3.590
11 .120 3.816
3/16 .180 5.730
1/4 .250 7.288
STAINLESS SQUARE TUBINGOrnamental & Structural
304ASTM A 554
Stock Lengths: 20 to 24 Ft.
Color: Pink
394
X Y t Wall Est. lbs.Dimension Gage Decimal per ft.
Available in various polished surface finishes.
Larger sizes available upon request.
3 x 14 .083 3.29
11 .120 4.70
3/16 .180 6.90
1/4 .250 10.00
3 1/2 x 11 .120 5.59
3/16 .180 8.35
1/4 .250 10.77
4 x 11 .120 6.34
3/16 .180 9.27
1/4 .250 12.68
5 x 1/4 .250 16.35
6 x 1/4 .250 19.02
STAINLESS SQUARE TUBINGOrnamental & Structural
304ASTM A 554
Stock Lengths: 20 to 24 Ft.
Color: Pink
395
1/2 x 1 18 .049 .500
16 .065 .650
1/2 x 1 1/2 18 .049 .630
16 .065 .830
14 .065 1.030
11 .120 1.450
1/2 x 2 18 .049 .473
3/4 x 1 16 .065 .705
3/4 x 1 1/4 18 .049 .630
16 .065 .830
14 .083 1.030
11 .120 1.450
3/4 x 1 1/2 16 .065 .990
14 .083 1.250
12 .109 1.620
11 .120 1.770
1 x 1 1/2 18 .049 .820
16 .065 1.080
14 .083 1.370
12 .109 1.760
11 .120 1.930
STAINLESS RECTANGULAR TUBING
Ornamental & Structural
304ASTM A 554
Stock Lengths: 20 to 24 Ft.
Color: Pink
X Y t Wall Est. lbs.Dimension Dimension Gage Decimal per ft.
Available in various polished surface finishes.
396
X Y t Wall Est. lbs.Dimension Dimension Gage Decimal per ft.
1 x 2 16 .065 1.27
14 .083 1.61
12 .109 2.09
11 .120 2.26
3/16 .180 3.63
1 x 2 1/2 14 .083 1.91
1 x 3 16 .065 1.69
14 .083 2.14
11 .120 3.06
3/16 .180 4.46
1 1/4 x 2 16 .065 1.34
14 .083 1.70
11 .120 2.41
1 1/4 x 2 1/2 14 .083 2.50
1 1/2 x 2 16 .065 1.49
14 .083 1.88
11 .120 1.77
STAINLESS RECTANGULAR TUBING
Ornamental & Structural
304ASTM A 554
Stock Lengths: 20 to 24 Ft.
Color: Pink
Available in various polished surface finishes.
397
Available in various polished surface finishes.
Larger sizes available upon request.
X Y t Wall Est. lbs.Dimension Dimension Gage Decimal per ft.
1 1/2 x 2 1/2 16 .065 1.69
14 .083 2.14
11 .120 3.06
3/16 .180 4.46
1 1/2 x 3 16 .065 1.93
14 .083 2.45
12 .109 3.14
11 .120 3.48
3/16 .180 5.28
2 x 3 14 .083 2.72
11 .120 3.88
3/16 .180 5.68
1/4 .250 7.67
2 x 4 14 .083 3.29
11 .120 4.97
3/16 .180 6.90
1/4 .250 10.00
2 x 6 3/16 .180 9.42
1/4 .250 12.21
4 x 6 3/16 .180 11.90
1/4 .250 15.62
3/8 .375 31.32
STAINLESS RECTANGULAR TUBING
Ornamental & Structural
304ASTM A 554
Stock Lengths: 20 to 24 Ft.
Color: Pink
STEEL GUIDEto
TUBE and PIPE
ERW Electrical Resistance Welded
Tubing is produced from low carbon strip steel,
of varying chemistry depending on finished wall
thickness and end use application. The steel is
then roll formed, electric resistance welded to
proper shape; usually round, square and
rectangular. Additional processing will occur
according to ASTM 513. The most popular
grades are listed below.
HREW Hot Roll Electric Weld
Tubing is produced from hot roll steel strip
heavier than 18 ga (.049), usually supplied in
the “as welded” condition. Typical end uses in
fabrication of moderate strength weldments,
machinery supports and general construction.
ASTM A 513 Type 1.
CREW Cold Roll Electric Weld
Tubing is produced from cold roll strip steel
18 ga (.049) and lighter usually supplied in
“as welded” condition. Typical end use
applications: Light frame assemblies,
conveyor rolls and display structures.
ASTM A 513 Type 2.
DOM Drawn Over Mandrel welded tubing
is formed to an oversize round condition;
resistance welded and normalized to make a
homogeneous tube which is virtually a
seamless product. Cold drawing to finished
dimensions produces close tolerance with
excellent concentricity.
.134 wall and lighter from 1020 steel
.156 wall and heavier from 1026 steel
Usually supplied in the “as drawn” condition
with alternate thermal treatment available upon
request. ASTM A 513 Type 5.
398
STEEL GUIDEto
TUBE and PIPE
Seamless Initially produced by hot “piercing” a
steel billet, followed by size reduction to
desired dimensions. Inherently this product
does not have precise concentricity due to
spiral rotation taking place during manufac-
turing.
1026 Is the most popular grade available in either
Hot or Cold finish conditions.
ASTM A 519
399
STEEL TUBINGRound Mechanical
ASTM A 513
O.D.WallSize Decimal
Est. lbs.per ft. HREW CREW DOM
1/4
3/8
1/2
5/8
3/4
7/8
20
18
20
18
16
14
20
18
16
11
20
18
16
14
1/8
18
16
14
11
3/16
18
16
12
1/8
3/16
.035
.049
.035
.049
.065
.083
.035
.049
.065
.120
.035
.049
.065
.083
.125
.049
.065
.083
.120
.187
.049
.065
.109
.125
.187
.080
.105
.127
.171
.215
.259
.174
.236
.302
.487
.221
.301
.389
.481
.668
.367
.476
.591
.807
1.128
.432
.562
.892
1.001
1.379
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
400
OD
Wall
STEEL TUBINGRound Mechanical
ASTM A 513
O.D.WallSize Decimal
Est. lbs.per ft. HREW CREW DOM
1
1 1/8
1 3/16
1 1/4
1 5/16
1 3/8
18
16
14
1/8
3/16
1/4
16
11
1/4
16
3/16
1/4
16
14
12
11
3/16
1/4
5/16
11
3/16
1/4
16
11
3/16
1/4
5/16
.049
.065
.083
.125
.187
.250
.065
.120
.250
.065
.187
.250
.065
.083
.109
.120
.187
.250
.312
.120
.187
.250
.065
.120
.187
.250
.312
.498
.649
.813
1.168
1.630
2.003
.736
.129
.234
.780
2.008
2.501
.823
1.034
1.328
1.448
2.132
2.670
3.132
1.073
2.259
2.837
.910
1.608
2.383
3.004
3.550
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
401
OD
Wall
STEEL TUBINGRound Mechanical
ASTM A 513
O.D.WallSize Decimal
Est. lbs.per ft. HREW CREW DOM
1 7/16
1 1/2
1 9/16
1 5/8
1 3/4
1/8
3/16
16
14
12
1/8
3/16
1/4
3/8
1/8
1/4
16
14
11
3/16
1/4
3/8
16
14
11
1/8
3/16
1/4
3/8
.125
.187
.065
.083
.109
.125
.187
.250
.375
.125
.250
.065
.083
.120
.187
.250
.375
.065
.083
.120
.125
.187
.250
.375
1.749
2.510
.996
1.256
1.619
1.836
2.634
3.338
4.506
1.916
3.506
1.083
1.367
1.929
2.885
3.671
5.006
1.170
1.478
2.089
2.169
3.136
4.005
5.507
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
402
OD
Wall
STEEL TUBINGRound Mechanical
ASTM A 513
O.D.WallSize Decimal
Est. lbs.per ft. HREW CREW DOM
1 7/8
2
2 1/8
2 1/4
16
14
11
1/8
3/16
1/4
3/8
16
14
11
1/8
3/16
1/4
3/8
1/2
16
11
3/16
1/4
16
14
1/8
3/16
1/4
3/8
.065
.083
.120
.125
.187
.250
.375
.065
.083
.120
.125
.187
.250
.375
.500
.065
.120
.187
.250
.065
.083
.125
.187
.250
.375
1.257
1.589
2.249
2.336
3.387
4.339
6.008
1.343
1.699
2.409
2.503
3.638
4.673
6.508
8.010
1.430
2.570
3.889
5.006
1.517
1.921
2.837
4.140
5.340
7.509
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
403
OD
Wall
STEEL TUBINGRound Mechanical
ASTM A 513 ASTM A 519
O.D.WallSize Decimal
Est. lbs.per ft. HREW CREW DOM SMLS
2 3/8
2 1/2
2 5/8
2 3/4
2 7/8
3
16
11
3/16
1/4
3/8
11
1/8
1/4
3/8
1/2
16
11
3/16
1/4
18
16
16
11
3/16
1/4
16
14
11
3/16
1/4
5/16
3/8
1/2
5/8
3/4
.065
.120
.187
.250
.375
.120
.125
.250
.375
.500
.065
.120
.187
.250
.049
.065
.065
.120
.187
.250
.065
.083
.120
.187
.250
.312
.375
.500
.625
.750
1.604
2.890
4.391
5.674
8.010
3.050
3.171
6.008
8.511
10.68
1.777
3.210
4.893
6.341
1.413
1.864
1.951
3.531
5.395
7.009
2.037
2.586
3.691
5.646
7.343
8.982
10.51
13.35
15.85
18.02
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
If a required wall thickness is not listed above, please contact a sales representative.
404
OD
Wall
STEEL TUBINGRound Mechanical
ASTM A 513 ASTM A 519
O.D.WallSize Decimal
Est. lbs.per ft. HREW CREW DOM SMLS
3 1/8
3 1/4
3 3/8
3 1/2
11
3/16
1/4
3/8
1/2
3/4
16
11
1/8
3/16
1/4
3/8
1/2
3/4
11
1/4
1/2
16
11
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
.120
.187
.250
.375
.500
.750
.065
.120
.125
.187
.250
.375
.500
.750
.120
.250
.500
.065
.120
.125
.187
.250
.312
.375
.500
.625
.750
1.000
3.851
5.897
7.676
11.01
14.02
19.02
2.211
4.011
4.172
6.148
8.010
11.51
14.69
20.03
4.172
8.344
15.35
2.385
4.332
4.506
6.650
8.678
10.65
12.52
16.02
19.19
22.03
26.70
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
If a required wall thickness is not listed above, please contact a sales representative.
405
OD
Wall
STEEL TUBINGRound Mechanical
ASTM A 513 ASTM A 519
O.D.WallSize Decimal
Est. lbs.per ft. HREW CREW DOM SMLS
3 5/8
3 3/4
4
4 1/4
4 3/8
1/8
1/4
3/8
1/2
11
1/8
3/16
1/4
3/8
1/2
3/4
16
11
1/8
3/16
1/4
3/8
1/2
3/4
1
11
1/4
3/8
1/2
1/4
1/2
.125
.250
.375
.500
.120
.125
.187
.250
.375
.500
.750
.065
.120
.125
.187
.250
.375
.500
.750
1.000
.120
.250
.375
.500
.250
.500
4.673
9.011
13.02
16.69
4.652
4.839
7.152
9.345
13.52
17.36
24.03
2.732
4.973
5.173
7.654
10.01
14.52
18.69
26.03
32.04
5.293
10.68
15.52
20.03
11.01
20.69
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
If a required wall thickness is not listed above, please contact a sales representative.
406
OD
Wall
STEEL TUBINGRound Mechanical
ASTM A 513 ASTM A 519
O.D.WallSize Decimal
Est. lbs.per ft. HREW CREW DOM SMLS
4 1/2
4 3/4
5
16
13
11
1/8
3/16
1/4
3/8
1/2
3/4
1
1 1/4
11
1/8
1/4
1/2
3/4
1
11
1/8
3/16
1/4
1/2
3/4
1
1 1/4
1 1/2
.065
.095
.120
.125
.187
.250
.375
.500
.750
1.000
1.250
.120
.125
.250
.500
.750
1.000
.120
.125
.187
.250
.500
.750
1.000
1.250
1.500
3.079
4.469
5.613
5.841
8.658
11.35
16.52
21.36
30.04
37.38
43.39
5.934
6.174
12.02
22.70
32.04
40.05
18.69
26.03
32.04
19.19
22.03
26.70
42.72
50.06
56.07
l
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
If a required wall thickness is not listed above, please contact a sales representative.
407
OD
Wall
STEEL TUBINGRound Mechanical
ASTM A 513 ASTM A 519
O.D.WallSize Decimal
Est. lbs.per ft. HREW DOM SMLS
5 1/4
5 1/2
5 3/4
6
1/8
1/4
1/2
3/4
1
1/8
1/4
3/8
1/2
3/4
1
1 1/2
3/16
1/4
3/8
1/2
3/4
1
14
11
1/8
3/16
1/4
3/8
1/2
3/4
1
.125
.250
.500
.750
1.000
.125
.250
.375
.500
.750
1.000
1.500
.187
.250
.375
.500
.750
1.000
.083
.120
.125
.187
.250
.375
.500
.750
1.000
6.815
13.35
25.37
36.05
45.39
7.176
14.02
20.53
26.70
38.05
48.06
64.08
11.17
14.69
21.53
28.04
40.05
50.73
4.800
7.536
7.843
11.67
15.35
22.53
29.37
42.05
53.40
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
If a required wall thickness is not listed above, please contact a sales representative.
408
OD
Wall
STEEL PIPE
ERW SMLSElectric Resistance Weld Seamless
ASTM A 53 ASTM A 106
Nominal Est. lbs.Pipe Size Schedule O.D. Wall per ft.
1/8 40 .405 .068 .24
1/4 40 .540 .088 .42
80 .540 .119 .54
3/8 40 .675 .091 .57
80 .675 .126 .74
1/2 40 .840 .109 .85
80 .840 .147 1.09
3/4 40 1.050 .113 1.13
80 1.050 .154 1.47
1 40 1.315 .133 1.68
80 1.315 .179 2.17
1 1/4 40 1.660 .140 2.27
80 1.660 .191 3.00
1 1/2 40 1.900 .145 2.72
80 1.900 .200 3.63
2 40 2.375 .154 3.65
80 2.375 .218 5.02
2 1/2 40 2.875 .203 5.79
80 2.875 .276 7.66
409
OD
Wall
Nominal Est. lbs.Pipe Size Schedule O.D. Wall per ft.
3 40 3.50 .216 7.58
80 3.50 .300 10.25
3 1/2 40 4.00 .226 9.11
80 4.00 .318 12.50
4 40 4.50 .237 10.79
80 4.50 .337 14.98
120 4.50 .438 19.00
5 40 5.56 .258 14.62
80 5.56 .375 20.78
120 5.56 .500 27.04
160 5.56 .625 32.96
6 40 6.63 .280 18.97
80 6.63 .432 28.57
120 6.63 .562 36.39
160 6.63 .719 45.35
*XXH 6.63 .864 53.16
8 5 8.63 .109 9.91
40 8.63 .322 28.55
60 8.63 .406 35.64
80 8.63 .500 43.39
120 8.63 .718 60.71
*XXH 8.63 .875 72.42
10 5 10.75 .134 15.19
40 10.75 .365 40.48
80 10.75 .594 64.43
120 10.75 .844 89.29
160 10.75 1.125 115.6
4” nominal and larger can be supplied either ERW or SMLS
*Extra heavy
STEEL PIPE
ERW SMLSElectric Resistance Weld Seamless
ASTM A 53 ASTM A 106
410
OD
Wall
STEEL TUBINGSquare
Mechanical StructuralLess than .120” wall 120” wall and heavier
ASTM A 513 ASTM A 50020’ lengths 20’ and 40’ lengths
X Y t Wall Est. lbs.Dimension Gage Decimal per ft.
1/2 x 18 .049 .301
16 .065 .384
5/8 x 20 .035 .281
18 .049 .384
16 .065 .495
3/4 x 18 .049 .467
16 .065 .605
14 .083 .753
11 .120 1.028
7/8 x 16 .065 .716
14 .083 .894
1 x 20 .035 .459
18 .049 .634
16 .065 .827
14 .083 1.035
13 .095 1.169
12 .109 1.320
11 .120 1.436
1 1/4 x 18 .049 .800
16 .065 1.047
14 .083 1.317
13 .095 1.492
12 .109 1.691
11 .120 1.844
3/16 .188 2.400
411
X Y t Wall Est. lbs.Dimension Gage Decimal per ft.
1 1/2 x 16 .065 1.268
14 .083 1.599
13 .095 1.815
12 .109 2.062
11 .120 2.252
3/16 .188 3.350
1/4 .250 4.000
1 3/4 x 16 .065 1.489
14 .083 1.881
12 .109 2.433
11 .120 2.660
3/16 .188 3.680
2 x 16 .065 1.710
14 .083 2.164
13 .095 2.461
12 .109 2.802
11 .120 3.050
3/16 .188 4.320
1/4 .250 5.410
2 1/4 x 11 .120 3.480
1/4 .250 6.260
2 1/2 x 14 .083 2.730
11 .120 3.900
3/16 .188 5.590
1/4 .250 7.110
STEEL TUBINGSquare
Mechanical StructuralLess than .120” wall 120” wall and heavier
ASTM A 513 ASTM A 50020’ lengths 20’ and 40’ lengths
412
X Y t Wall Est. lbs.Dimension Gage Decimal per ft.
3 x 14 .083 3.29
11 .120 4.75
3/16 .188 6.87
1/4 .250 8.81
5/16 .313 10.58
3/8 .375 12.17
3 1/2 x 11 .120 5.61
3/16 .188 8.15
1/4 .250 10.51
5/16 .313 12.70
3/8 .375 14.72
4 x 14 .083 4.42
11 .120 6.46
3/16 .188 9.42
1/4 .250 12.21
5/16 .313 14.83
3/8 .375 17.27
1/2 .500 21.63
4 1/2 x 3/16 .188 10.70
1/4 .250 13.91
5 x 11 .120 7.80
3/16 .188 11.97
1/4 .250 15.62
5/16 .313 19.08
3/8 .375 22.37
1/2 .500 28.43
STEEL TUBINGSquare
Mechanical StructuralLess than .120” wall 120” wall and heavier
ASTM A 513 ASTM A 50020’ lengths 20’ and 40’ lengths
413
STEEL TUBINGSquare
StructuralASTM A 500
20’ and 40’ lengths
X Y t Wall Est. lbs.Dimension Gage Decimal per ft.
6 x 3/16 .188 14.53
1/4 .250 19.02
5/16 .313 23.34
3/8 .375 27.48
1/2 .500 35.24
7 x 3/16 .188 17.08
1/4 .250 22.42
1/2 .500 42.05
8 x 3/16 .188 19.63
1/4 .250 25.82
5/16 .313 31.84
3/8 .375 37.69
1/2 .500 48.85
5/8 .625 59.32
10 x 3/16 .188 24.73
1/4 .250 32.63
3/8 .375 47.90
1/2 .500 62.46
12 x 1/4 .250 39.43
5/16 .313 48.86
3/8 .375 58.10
1/2 .500 76.07
5/8 .625 93.34
14 x 3/8 .375 68.31
1/2 .500 89.68
16 x 1/2 .500 103.30
414
STEEL TUBINGRectangle
Mechanical StructuralLess than .120” wall .120” wall and heavier
ASTM A 513 ASTM A 50020’ lengths 20’ and 40’ lengths
X Y t Wall Est. lbs.Dimension Dimension Gage Decimal per ft.
1/2 x 1 16 .065 .605
1/2 x 1 1/2 16 .065 .827
3/4 x 1 1/2 16 .065 .937
14 .083 1.176
11 .120 1.640
3/4 x 2 13 .095 1.715
1 x 1 1/4 11 .120 1.640
1 x 1 1/2 18 .049 .800
16 .065 1.047
14 .083 1.317
11 .120 1.844
1 x 2 16 .065 1.268
14 .083 1.599
13 .095 1.815
11 .120 2.252
3/16 .188 3.350
1/4 .250 4.000
1 x 2 1/2 14 .083 1.881
11 .120 2.660
1 x 3 16 .065 1.710
14 .083 2.164
11 .120 3.050
1 1/4 x 2 14 .083 1.741
11 .120 2.456
415
1 1/2 x 2 16 .065 1.49
14 .083 1.88
11 .120 2.66
1 1/2 x 2 1/2 14 .083 2.16
11 .120 3.05
3/16 .188 4.32
1/4 .250 5.41
1 1/2 x 3 14 .083 2.45
11 .120 3.48
3/16 .188 4.96
1 1/2 x 4 14 .083 3.01
11 .120 4.33
3/16 .188 6.24
2 x 3 14 .083 2.73
11 .120 3.90
3/16 .188 5.59
1/4 .250 7.11
5/16 .313 8.45
2 x 4 14 .083 3.29
11 .120 4.75
3/16 .188 6.87
1/4 .250 8.81
5/16 .313 10.58
3/8 .375 12.17
X Y t Wall Est. lbs.Dimension Dimension Gage Decimal per ft.
STEEL TUBINGRectangle
Mechanical StructuralLess than .120” wall .120” wall and heavier
ASTM A 513 ASTM A 50020’ lengths 20’ and 40’ lengths
416
STEEL TUBINGRectangle
StructuralASTM A 500
20’ and 40’ lengths
X Y t Wall Est. lbs.Dimension Dimension Gage Decimal per ft.
2 x 5 11 .120 5.61
3/16 .188 8.15
1/4 .250 10.51
2 x 6 11 .120 6.46
3/16 .188 9.24
1/4 .250 12.21
5/16 .313 14.83
3/8 .375 17.27
2 x 8 3/16 .188 11.97
1/4 .250 15.62
3/8 .375 22.37
2 x 10 3/16 .188 14.53
1/4 .250 19.02
2 x 12 3/16 .188 17.08
1/4 .250 22.42
2 1/2 x 3 11 .120 4.33
2 1/2 x 3 1/2 3/16 .188 6.87
1/4 .250 8.81
2 1/2 x 4 11 .120 5.18
2 1/2 x 5 11 .120 6.03
3/16 .188 8.78
1/4 .250 11.36
417
X Y t Wall Est. lbs.Dimension Dimension Gage Decimal per ft.
3 x 4 11 .120 5.61
3/16 .188 8.15
1/4 .250 10.51
5/16 .313 12.70
3/8 .375 14.72
3 x 5 11 .120 6.46
3/16 .188 9.42
1/4 .250 12.21
5/16 .313 14.83
3/8 .375 17.27
1/2 .500 21.63
3 x 6 11 .120 7.31
3/16 .188 10.70
1/4 .250 13.91
5/16 .313 16.96
3/8 .375 19.82
1/2 .500 25.03
3 x 8 3/16 .188 13.25
1/4 .250 17.32
5/16 .313 21.21
3/8 .375 24.93
1/2 .500 31.84
3 x 10 3/16 .188 15.80
1/4 .250 20.72
3 x 12 3/16 .188 18.35
1/4 .250 24.12
STEEL TUBINGRectangle
StructuralASTM A 500
20’ and 40’ lengths
418
X Y t Wall Est. lbs.Dimension Dimension Gage Decimal per ft.
4 x 5 3/16 .188 10.70
1/4 .250 13.91
4 x 6 11 .120 7.96
3/16 .188 11.97
1/4 .250 15.62
5/16 .313 19.08
3/8 .375 22.37
1/2 .500 28.43
4 x 8 3/16 .188 14.53
1/4 .250 19.02
5/16 .313 23.34
3/8 .375 27.48
1/2 .500 35.24
4 x 10 3/16 .188 17.08
1/4 .250 22.42
5/16 .313 27.59
3/8 .375 32.58
1/2 .500 42.05
4 x 12 3/16 .188 19.63
1/4 .250 25.82
5/16 .313 31.80
3/8 .375 37.69
1/2 .500 48.85
6 x 8 3/16 .188 17.08
1/4 .250 22.42
5/16 .313 27.59
3/8 .375 32.58
1/2 .500 42.05
STEEL TUBINGRectangle
StructuralASTM A 500
20’ and 40’ lengths
419
X Y t Wall Est. lbs.Dimension Dimension Gage Decimal per ft.
6 x 10 3/16 .188 19.63
1/4 .250 25.82
5/16 .313 31.84
3/8 .375 37.69
1/2 .500 48.85
6 x 12 3/16 .188 22.18
1/4 .250 29.23
5/16 .313 36.10
3/8 .375 42.79
1/2 .500 55.66
8 x 10 1/4 .250 29.23
5/16 .313 36.10
3/8 .375 42.79
1/2 .500 55.66
8 x 12 3/16 .188 24.73
1/4 .250 32.63
5/16 .313 40.35
3/8 .375 47.90
1/2 .500 62.46
10 x 14 5/16 .313 48.86
3/8 .375 58.10
1/2 .500 76.07
STEEL TUBINGRectangle
StructuralASTM A 500
20’ and 40’ lengths
420
STRUCTURAL
YARDE METALS
STRUCTURALAluminum
Structural Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . 421
Angles: 6061 . . . . . . . . . . . . . . . . . . . . . 422 - 425 6063 sharp corner . . . . . . . . . . 426 - 428
Channels: 6061 . . . . . . . . . . . . . . . . . . . . . 429 - 4306063 sharp corner . . . . . . . . . . 431 - 432
Beams: 6061 . . . . . . . . . . . . . . . . . . . . . 433 - 435
Tees & Zees: 6061, 6063 . . . . . . . . . . . . . . . . 436 - 437
Handrail: 6063 . . . . . . . . . . . . . . . . . . . . . . . . . .438
Stainless
Structural Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . 439
Angles: 304, 316 . . . . . . . . . . . . . . . . . . 440 - 442
Channels: 304 . . . . . . . . . . . . . . . . . . . . . . . . . . . 442
Carbon
Structural Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . 443
Angles: ASTM A 36 . . . . . . . . . . . . . . . . 444 - 446
Channels: ASTM A 36 . . . . . . . . . . . . . . . . 447 - 449
Beams: Wide Flange, ASTM A 36 . . . . 450 - 454
Tees: ASTM A 36 . . . . . . . . . . . . . . . . . . . . . 455
Pages
STRUCTURAL
421
ALUMINUM GUIDEto
STRUCTURAL SHAPES
6061 Is an alloy that has good strength, corrosion resistance and weldability. This is the most popular of all aluminum shapes and is available in two distinct configurations:
American Standard (AS) With a cross section geometry similar to that of carbon steel with tapered flanges and rounded ends.
Aluminum Association (AA) Is designed with flanges that are straight and thicker than the web.
6063 The “architectural alloy” has good finishing characteristics, excellent for anodizing and has high resistance to corrosion. Identifying characteristics are sharp corners on all legs and flanges.
423
2 x 1 1/2 x 1/8 .496 12.41
3/16 .732 18.29
1/4 .956 23.90
2 x 2 x 1/8 .577 14.44
3/16 .850 21.26
1/4 1.110 27.75
5/16 1.400 35.00
3/8 1.606 40.15
2 1/2 x 1 1/2 x 1/8 .570 14.25
3/16 .850 21.25
1/4 .956 23.90
2 1/2 x 2 x 3/16 .961 24.03
1/4 1.257 31.43
2 1/2 x 2 1/2 x 1/8 .724 18.10
3/16 1.070 26.75
1/4 1.404 35.10
5/16 1.729 43.23
3/8 2.047 51.18
3 x 2 x 3/16 1.070 26.78
1/4 1.400 35.08
3/8 2.050 51.18
3 x 2 1/2 x 1/4 1.540 38.43
3/8 2.250 56.25Similar to steel cross sections with tapered flanges, and rounded ends.
Dimension Dimension Thickness Est. lbs. Est. lbs.A B t per ft. per 25 ft.
ALUMINUM ANGLESAmerican Standard
6061-T6Equal and Unequal Legs
ASTM B 221 25 Ft. Lengths
424
3 x 3 x 3/16 1.28 31.88
1/4 1.68 42.10
5/16 2.08 52.05
3/8 2.47 61.85
1/2 3.23 80.68
3 1/2 x 2 1/2 x 1/4 1.68 42.05
3/8 2.47 61.75
1/2 3.22 80.55
3 1/2 x 3 1/2 x 1/4 1.99 49.67
3/8 2.93 73.20
1/2 3.83 95.75
4 x 3 x 1/4 1.99 49.73
3/8 2.93 73.15
1/2 3.83 95.75
4 x 4 x 1/4 2.28 57.08
3/8 3.37 84.15
1/2 4.41 100.40
Dimension Dimension Thickness Est. lbs. Est. lbs.A B t per ft. per 25 ft.
ALUMINUM ANGLESAmerican Standard
6061-T6Equal and Unequal Legs
ASTM B 221 25 Ft. Lengths
Similar to steel cross sections with tapered flanges, and rounded ends.
425
5 x 3 x 3/8 3.35 83.73
1/2 4.40 110.00
5 x 5 x 3/8 4.24 105.90
1/2 5.58 139.50
6 x 3 x 3/8 3.76 94.00
3 1/2 x 1/2 5.31 132.80
4 x 3/8 4.25 105.90
1/2 5.58 139.50
6 x 3/8 5.12 128.00
1/2 6.75 168.80
8 x 6 x 3/4 11.68 292.00
8 x 1/2 9.20 230.00
8 x 1 17.67 282.72Similar to steel cross sections with tapered flanges, and rounded ends.
Dimension Dimension Thickness Est. lbs. Est. lbs.A B t per ft. per 25 ft.
ALUMINUM ANGLESAmerican Standard
6061-T6Equal and Unequal Legs
ASTM B 221 25 Ft. Lengths
426
ALUMINUM ANGLESSharp Corner*
6063-T52Equal Legs and Unequal Legs
ASTM B 221 16 Ft. Lengths
1/2 x 3/8 x 1/16 .061 .976
1/2 x 1/16 .068 1.09
1/2 x 1/8 .128 2.05
5/8 x 5/8 x 1/8 .168 2.69
3/4 x 3/8 x 3/32 .120 1.90
3/8 x 1/8 .150 2.40
3/4 x 1/16 .107 1.71
3/4 x 3/32 .155 2.48
3/4 x 1/8 .202 3.23
7/8 x 7/8 x 1/8 .236 3.78
1 x 1/2 x 1/16 .107 1.71
1/2 x 3/32 .157 2.51
1/2 x 1/8 .202 3.23
3/4 x 1/8 .239 3.82
1 x 1/16 .141 2.26
1 x 1/8 .275 4.40
1 x 3/16 .400 6.40
1 x 1/4 .524 8.38* Legs are uniform in thickness - all corners are sharp.
Dimension Dimension Thickness Est. lbs. Est. lbs.A B t per ft. per 16 ft.
1 1/4 x 1/2 x 1/8 .239 3.84
3/4 x 1/8 .276 4.42
1 x 1/8 .313 5.01
1 1/4 x 1/8 .348 5.57
1 1/4 x 3/16 .511 8.18
1 1/4 x 1/4 .660 10.56
1 1/2 x 1/2 x 1/8 .275 4.40
3/4 x 1/8 .313 5.01
1 x 1/8 .349 5.58
1 1/2 x 1/8 .422 6.75
1 1/2 x 3/16 .619 9.90
1 1/2 x 1/4 .830 13.28
1 3/4 x 1 3/4 x 1/8 .496 7.94
2 x 1/2 x 1/8 .350 5.60
3/4 x 1/8 .394 6.30
1 x 1/8 .422 6.75
1 x 3/16 .633 10.13
1 1/2 x 1/8 .496 7.94
1 1/2 x 3/16 .728 11.65
1 1/2 x 1/4 .974 15.60
2 x 1/8 .581 9.30
2 x 3/16 .841 13.46
2 x 1/4 1.130 18.08
427
* Legs are uniform in thickness - all corners are sharp.
Dimension Dimension Thickness Est. lbs. Est. lbs.A B t per ft. per 16 ft.
ALUMINUM ANGLESSharp Corner*
6063-T52Equal Legs and Unequal Legs
ASTM B 221 16 Ft. Lengths
428
ALUMINUM ANGLESSharp Corner*
6063-T52Equal Legs and Unequal Legs
ASTM B 221 16 Ft. Lengths
2 1/2 x 1 1/2 x 1/8 .560 8.96
2 1/2 2 x 1/8 .580 9.28
2 x 3/16 .970 15.52
2 x 1/4 1.275 20.40
2 1/2 x 1/8 .700 11.20
2 1/2 x 3/16 1.083 17.38
2 1/2 x 1/4 1.425 22.80
2 3/4 x 1 3/4 x 1/4 1.250 20.00
3 x 1/2 x 1/8 .506 8.10
1 x 1/8 .569 9.10
2 x 1/8 .700 11.20
2 x 1/4 1.400 22.40
3 x 1/8 .880 14.08
3 x 3/16 1.250 20.00
3 x 1/4 1.640 26.24
3 1/2 x 1 1/4 x 1/8 .680 10.88
4 x 2 x 1/8 .875 14.00
4 x 1/8 1.181 18.89
5 x 3 x 1/8 1.180 18.88
* Legs are uniform in thickness - all corners are sharp.
Dimension Dimension Thickness Est. lbs. Est. lbs.A B t per ft. per 16 ft.
429
Depth Web Flange Flange Est. lbs. Est. lbs.A t B t1 per ft. per 25 ft.
ALUMINUM CHANNELSAluminum Association
6061-T6ASTM B 221 25 Ft. Lengths
2 .130 1.00 .130 .58 14.42
.170 1.25 .260 1.07 26.75
3 .130 1.50 .200 1.14 28.50
.170 1.75 .260 1.60 40.00
4 .150 2.00 .230 1.74 43.50
.190 2.25 .290 2.33 58.25
5 .150 2.25 .260 2.21 55.25
.190 2.75 .320 3.09 77.25
6 .170 2.50 .290 2.83 70.75
.210 3.25 .350 4.03 100.70
7 .170 2.75 .290 3.21 80.10
.210 3.50 .380 4.72 118.00
8 .190 3.00 .350 4.15 103.70
.250 3.75 .410 5.79 144.70
9 .230 3.25 .350 4.98 124.50
.290 4.00 .440 6.97 174.30
10 .250 3.50 .410 6.14 153.50
.310 4.25 .500 8.36 209.00
12 .290 4.00 .470 8.27 206.90
.350 5.00 .620 11.82 295.50These sections have straight rather than tapered flanges; the flanges are thicker than the web, lighter weight/easier to join.
430
ALUMINUM CHANNELSAmerican Standard
6061-T6ASTM B 221 25 Ft. Lengths
3 1.41 .170 1.42 35.50
1.50 .258 1.73 43.25
1.60 .356 2.08 52.00
4 1.58 .180 1.85 46.15
1.65 .247 2.16 54.00
1.72 .320 2.50 62.50
5 1.75 .190 2.32 58.00
1.89 .325 3.11 77.75
2.03 .472 3.97 99.35
6 1.92 .200 2.83 70.75
1.95 .225 3.00 75.05
2.03 .314 3.63 90.75
2.16 .437 4.49 112.25
7 2.11 .230 3.54 88.53
2.19 .314 4.23 105.75
8 2.29 .250 4.25 106.25
2.34 .303 4.75 118.75
2.53 .487 6.49 162.25
9 2.43 .230 4.60 115.00
2.65 .448 6.92 173.00
10 2.60 .240 5.28 132.00
2.89 .526 8.64 216.00
12 2.96 .300 7.41 185.25
3.05 .387 8.64 216.00
3.17 .510 10.38 259.50
15 3.40 .400 11.71 292.75
3.72 .716 17.29 432.25
Dimension Dimension Thickness Est. lbs. Est. lbs.A B t per ft. per 25 ft.
431
ALUMINUM CHANNELSSharp Corner*
6063-T52 ASTM B 221 16 Ft. Lengths
3/8 x 3/8 x 1/16 .074 1.18
1/2 x 3/8 x 1/8 .150 2.40
1/2 x 3/32 .147 2.35
3/4 x 1/8 .258 4.13
5/8 x 5/8 x 1/8 .239 3.82
3/4 x 3/8 x 1/8 .184 2.94
1/2 x 1/16 .118 1.89
1/2 x 1/8 .221 3.53
3/4 x 1/8 .294 4.70
1 x 1/8 .350 5.60
1 1/2 x 1/8 .525 8.40
1 x 1/2 x 1/8 .258 4.13
3/4 x 1/8 .330 5.28
1 x 1/8 .405 6.50
1 1/2 x 1/8 .525 8.40
2 x 1/8 .710 11.36
1 1/8 x 1 1/8 x 1/8 .469 7.50
1 1/4 x 1/2 x 1/8 .294 4.70
3/4 x 1/8 .374 5.98
1 1/4 x 1/8 .515 8.24
* Legs and flanges are uniform in thickness - all corners are sharp.
Dimension Dimension Thickness Est. lbs. Est. lbs.A B t per ft. per 16 ft.
432
1 1/2 x 1/2 x 1/8 .330 5.28
3/4 x 1/8 .404 6.46
1 x 1/8 .477 7.63
1 1/2 x 1/8 .625 10.00
1 3/4 x 3/4 x 1/8 .441 7.06
1 x 1/8 .515 8.24
1 3/4 x 1/8 .735 11.80
2 x 1/2 x 1/8 .405 6.48
1 x 1/8 .552 8.83
1 x 3/16 .810 12.96
1 1/2 x 1/8 .720 11.52
2 x 1/8 .845 13.52
2 x 1/4 1.634 26.14
2 1/4 x 7/8 x 1/8 .552 8.83
2 3/8 x 1 1/4 x 3/16 1.027 16.43
2 1/2 x 1 x 1/8 .600 9.60
1 1/2 x 1/8 .771 12.34
3 x 1/2 x 1/8 .552 8.83
1 x 1/8 .699 11.19
2 x 1/8 .955 15.28
3 x 1/8 1.313 21.01
4 x 1 1/2 x 1/8 .992 15.87
5 x 2 x 3/16 1.910 30.56* Legs and flanges are uniform in thickness - all corners are sharp.
Dimension Dimension Thickness Est. lbs. Est. lbs.A B t per ft. per 16 ft.
ALUMINUM CHANNELSSharp Corner*
6063-T52 ASTM B 221 16 Ft. Lengths
ALUMINUM I BEAMSAluminum Association
6061-T6ASTM B 221 25 Ft. Lengths
433
Dimension Web Flange Flange Est. lbs. Est. lbs.A t B t1 per ft. per 25 ft.
3 x .130 x 2.50 .200 1.64 41.00
.150 x 2.50 .260 2.03 50.75
4 x .150 x 3.00 .230 2.31 57.77
.170 x 3.00 .290 2.79 69.82
5 x .190 x 3.50 .320 3.70 92.50
6 x .190 x 4.00 .290 4.03 100.75
.210 x 4.00 .350 4.69 117.25
7 x .230 x 3.00 .380 5.80 145.00
8 x .230 x 5.00 .350 6.18 154.50
.250 x 5.00 .410 7.02 175.50
10 x .250 x 6.00 .410 8.65 216.25
.290 x 6.00 .500 10.29 257.25
12 x .290 x 7.00 .470 11.67 291.75
.310 x 7.00 .620 14.29 357.25These sections have straight rather than tapered flanges; the flanges are thicker than theweb, lighter weight/easier to join.
434
ALUMINUM I BEAMSAmerican Standard
6061-T6ASTM B 221 25 Ft. Lengths
3 x .170 x 2.33 .170 1.96 49.10
.349 x 2.51 .170 2.60 64.98
4 x .190 x 2.60 .190 2.65 66.15
.326 x 2.80 .190 3.28 82.02
5 x .210 x 3.00 .210 3.43 85.85
.494 x 3.28 .210 5.10 127.60
6 x .230 x 3.33 .230 4.30 107.60
.343 x 3.44 .230 5.25 131.25
8 x .270 x 4.00 .270 6.35 158.75
.532 x 4.26 .270 8.81 220.20
10 x .310 x 3.00 .310 8.76 219.00
12 x .350 x 5.00 .350 10.99 274.80
Similar to steel cross sections with tapered flanges and rounded ends.
Dimension Web Flange Flange Est. lbs. Est. lbs.A t B t1 per ft. per 25 ft.
ALUMINUM WIDE FLANGE BEAMSAmerican Standard
6061-T6ASTM B 221 25 Ft. Lengths
6 x .2400 x 6.00 5.40 135.0
8 x .2300 x 5.25 5.91 147.8
.2450 x 6.50 8.32 208.0
.2880 x 8.00 10.72 268.0
Dimension Web Flange Est. lbs. Est. lbs.A t B per ft. per 25 ft.
435
4 x .3125 x 4.00 4.76 119.0
5 x .3125 x 5.00 6.49 162.3
6 x .2500 x 5.94 8.02 200.5
Dimension Web Flange Est. lbs. Est. lbs.A t B per ft. per 25 ft.
ALUMINUM H BEAMSAmerican Standard
6061-T6ASTM B 221 25 Ft. Lengths
ALUMINUM ZEESSharp Corners, Round Angles
6061-T6AMS QQA 200/16 ASTM B 308 25 Ft. Lengths
ALUMINUM TEESAmerican Standard
6061-T6ASTM B 221 25 Ft. Lengths
Flange Stem Thickness Est. lbs. Est. lbs.A B t per ft. per 25 ft.
1 1/2 x 1 1/2 x 1/4 .870 21.75
2 x 2 x 3/16 .843 21.08
2 x 2 x 1/4 1.259 31.47
2 1/2 x 2 1/2 x 5/16 1.909 47.72
3 x 3 x 3/8 2.717 67.92
4 x 4 x 3/8 3.743 93.50
Flange Stem Thickness Est. lbs. Est. lbs.A B t per ft. per 25 ft.
3 x 2.688 x 1/4 2.328 58.20
4 x 3.062 x 1/4 2.847 71.18
436
1/2 x 1/2 x 3/32 .146 2.336
3/4 x 3/4 x 3/4 .294 4.704
7/8 x 3/4 x 1/8 .319 5.104
1 x 1 1/8 x 1/8 .450 7.200
437
Flange Stem Thickness Est. lbs. Est. lbs.A B t per ft. per 16 ft.
ALUMINUM ZEESSharp Corner
6063-T52ASTM B 221 16 Ft. Lengths
ALUMINUM TEESSharp Corner
6063-T52ASTM B 221 16 Ft. Lengths
3/4 x 3/4 x 1/8 .202 3.23
1 1/4 x 1/8 .274 4.38
1 x 3/4 x 1/8 .239 3.82
1 x 1/8 .275 4.40
1 1/4 x 7/8 x 1/8 .294 4.71
1 1/2 x 1 1/2 x 1/8 .430 6.88
2 x 3/4 x 1/8 .386 6.18
2 x 3/16 .856 10.27
2 x 1/4 1.125 18.00
Flange Stem Thickness Est. lbs. Est. lbs.A B t per ft. per 16 ft.
438
WeightSize Wall per ft.
ALUMINUM HANDRAIL6063-T52
AMS QQA 200/9 ASTM B 221
1.562 .812 .6110
1.938 1.062 .7830
2.282 1.900 .4920
2.500 1.532 .6340
Standard Handrail Yarde Colonial Handrail
Squares 6063-T42 (Twistable)
Channel 6063-T42/T52
Square Tubing 6063-T42/T52
Pipe 6063-T42/52
Large Handrail Section 1.938”
Small Handrail Section 1.562”
Top Rail Molding 2.5”
Matching Channel 2.282”
1/2” 5/8”
1 x 1/2 x 1/2 x .125
1 1/4 x 1/2 x 1/2 x .125
1 3/4 x 3/4 x 3/4 x .125
1 1/2 x 3/4 x 3/4 x .125
3/8 SCH 40
1/2 SCH 40
3/4 SCH 40
1 SCH 40
1 1/4 SCH 40
1 1/2 SCH 40
2 SCH 40
2 1/2 SCH 40
1 1/2 x .125
2 x .125
2 1/2 x .075
3 x .125
4 x .125
1/2 x .500 Wall
5/8 x .062
3/4 x .125
1 x .125
1 1/4 x .125
STAINLESS GUIDEto
STRUCTURAL SHAPES
304 Grade is non-magnetic in the annealed condition. It is also a good heat resistant and corrosion resistancealloy. Geometry is similar to carbon steel with taperedlegs/flanges and rounded ends.
304L Is the extra low carbon (.03 max) variety of 304, intended for weld applications to reduce inter-granularcorrosion in the heat affected zone.
316 Molybdenum is added to enhance the corrosion resistance properties in more severe environments.
316L Is the extra low carbon (.03 max) variety of 316, intended for weld applications to reduce intergranularcorrosion in the heat affected zone.
439
440
3/4 x 3/4 x 1/8 .59 11.9
3/16 .85 17.0
1 x 1 x 1/8 .80 16.0
3/16 1.16 23.2
1/4 1.49 29.8
1 1/4 x 1 1/4 x 1/8 1.01 20.2
3/16 1.48 29.6
1/4 1.93 38.6
1 1/2 x 1 1/2 x 1/8 1.23 24.6
3/16 1.80 36.0
1/4 2.34 46.8
2 x 2 x 1/8 1.65 33.0
3 /16 2.44 48.8
1/4 3.19 63.8
3/8 4.64 92.8
2 1/2 x 2 1/2 x 3/16 3.07 61.4
1/4 4.10 82.0
3/8 5.97 119.0
Dimension Dimension Thickness Est. lbs. Est. lbs.A B t per ft. per 20 ft.
STAINLESS ANGLESHot Rolled Annealed and Pickled
304/316Equal Legs
ASTM A 276 QQ S 763ASTM/ASME A 479 Color: Pink/Purple
20 Ft. Random Lengths
“L” grades available.
441
3 x 3 x 3/16 3.79 75.8
1/4 4.90 98.0
5/16 6.10 122.0
3/8 6.20 124.0
1/2 9.45 189.0
3 1/2 x 3 1/2 x 1/4 5.80 116.0
4 x 4 x 1/4 6.60 132.0
3/8 9.80 196.0
1/2 12.90 258.0
5 x 5 x 3/8 12.30 246.0
6 x 6 x 3/8 14.90 298.0
Dimension Dimension Thickness Est. lbs. Est. lbs.A B t per ft. per 20 ft.
“L” grades available.
STAINLESS ANGLESHot Rolled Annealed and Pickled
304/316Equal Legs
ASTM A 276 QQ S 763ASTM/ASME A 479 Color: Pink/Purple
20 Ft. Random Lengths
STAINLESS ANGLESHot Rolled Annealed and Pickled
304/316Unequal Legs
ASTM A 276 QQ S 763ASTM/ASME A 479 Color: Pink/Purple
20 Ft. Random Lengths
Dimension Dimension Thickness Est. lbs. Est. lbs.A B t per ft. per 20 ft.
3 x 1 1/2 x 1/4 3.51 70.22 x 3/16 3.07 61.4
1/4 4.10 82.0
4 x 3 x 1/4 5.80 116.03/8 8.50 170.0
“L” grades available.
442
STAINLESS CHANNELSHot Rolled Annealed and Pickled
304ASTM A 276 QQ S 763
ASTM/ASME A 479Color: Pink
20 Ft. Random Lengths
1 1/2 x 3/4 x 1/8 1.20 24.0
2 x 1 x 1/8 1.53 30.6
1/4 3.15 63.0
3 x 1 3/8 x 3/16 4.19 83.8
1 1/2 x 1/4 4.75 95.0
4 x 1 3/4 x 1/4 6.69 133.8
6 x 3 x 3/8 14.77 295.4
Dimension Dimension Thickness Est. lbs. Est. lbs.A B t per ft. per 20 ft.
STAINLESS ANGLESHot Rolled Annealed and Pickled
304Unequal Legs
ASTM A 276 QQ S 763ASTM/ASME A 479
Color: Pink 20 Ft. Random Lengths
1 1/2 x 3/4 x 1/8 1.20 24.0
2 x 1 x 1/8 1.53 30.6
1/4 3.15 63.0
3 x 1 3/8 x 3/16 4.19 83.8
1 1/2 x 1/4 4.75 95.0
4 x 1 3/4 x 1/4 6.69 133.8
6 x 3 x 3/8 14.77 295.0
Dimension Dimension Thickness Est. lbs. Est. lbs.A B t per ft. per 20 ft.
“L” grades available.
CARBON STEEL GUIDEto
STRUCTURAL SHAPES
A 36 These hot rolled sections are produced to a minimum 36,000 Psi yield point as defined in the ASTM A 36 specification. Also used extensively by fabricators for their inherent structural strength, and ease of welding, rolling and punching.
HSLA High Strength Low Alloy sections are available upon request.
443
444
STEEL ANGLES
ASTM A 36Equal and Unequal Legs
20 Ft. LengthsDimension Dimension Thickness Est. lbs. Est. lbs.
A B t per ft. per 20 ft.
1/2 x 1/2 x 1/8 .38 7.6
3/4 x 3/4 x 1/8 .59 11.8
1 x 1 x 1/8 .80 16.0
3/16 1.16 23.2
1/4 1.49 29.8
1 1/4 x 1 1/4 x 1/8 1.01 20.2
3/16 1.48 29.6
1 1/2 x 1 1/2 x 1/8 1.23 24.6
3/16 1.80 36.0
1/4 2.34 46.8
1 3/4 x 1 3/4 x 1/8 1.44 28.8
3/16 2.12 42.4
1/4 2.77 55.4
2 x 2 x 1/8 1.65 33.0
3 /16 2.44 48.8
1/4 3.19 63.8
5/16 3.92 78.4
3/8 4.70 94.0
Dimension Dimension Thickness Est. lbs. Est. lbs.A B t per ft. per 20 ft.
2 1/2 x 2 1/2 x 3/16 3.07 61.4
1/4 4.10 82.0
5/16 5.00 100.0
3/8 5.90 118.0
1/2 7.70 154.0
3 x 2 x 1/4 4.10 82.0
3/8 5.90 118.0
1/2 7.70 154.0
3 x 2 1/2 x 1/4 4.50 90.0
3/8 6.60 132.0
1/2 8.50 170.0
3 x 3 x 1/4 4.90 98.0
3/8 7.20 144.0
1/2 9.40 188.0
3 1/2 x 2 1/2 x 1/4 4.90 98.0
1/2 9.40 188.0
3 1/2 x 3 x 1/4 5.40 108.0
1/2 10.20 204.0
3 1/2 x 3 1/2 x 1/4 5.80 116.0
3/8 8.50 170.0
4 x 3 x 1/4 5.80 116.0
3/8 8.50 170.0
4 x 4 x 1/4 6.60 132.0
3/8 9.80 196.0
1/2 12.80 256.0
STEEL ANGLES
ASTM A 36Equal and Unequal Legs
20 Ft. Lengths
445
446
Dimension Dimension Thickness Est. lbs. Est. lbs.A B t per ft. per 20 ft.
5 x 3 x 1/4 6.60 132.0
5/16 8.20 164.0
3/8 9.80 196.0
1/2 12.80 256.0
5 x 3 1/2 x 1/4 7.00 140.0
5/16 8.70 174.0
3/8 10.40 208.0
1/2 13.60 272.0
5/8 16.80 336.0
3/4 19.80 396.0
5 x 5 x 3/8 12.30 246.0
1/2 16.20 324.0
3/4 23.60 472.0
6 x 6 x 3/8 14.90 298.0
1/2 19.60 392.0
3/4 28.70 574.0
8 x 8 x 1/2 26.40 528.0
3/4 38.90 778.0
STEEL ANGLES
ASTM A 36Equal and Unequal Legs
20 Ft. Lengths
447
Size & Depth Lbs. Web FlangeA per ft. t Width B
STEEL CHANNELS
ASTM A 3620 & 40 Ft. Lengths
3 x 4.1 .170 x 1.410
5.0 .258 x 1.498
6.0 .356 x 1.596
7.1 .312 x 1.938
4 x 5.4 .184 x 1.584
6.3 .247 x 1.647
7.3 .321 x 1.721
13.8 .500 x 2.500
5 x 6.7 .190 x 1.750
9.0 .325 x 1.885
6 x 8.2 .200 x 1.920
10.5 .314 x 2.034
12.0 .310 x 2.497
13.0 .437 x 2.157
15.3 .340 x 3.500
16.3 .375 x 3.000
448
Size & Depth Lbs. Web FlangeA per ft. t Width B7 x 9.8 .210 x 2.090
12.3 .314 x 2.194
14.8 .419 x 2.299
8 x 8.5 .180 x 1.875
11.5 .220 x 2.260
13.8 .303 x 2.343
18.8 .487 x 2.527
20.0 .400 x 3.025
22.8 .427 x 3.502
9 x 13.4 .233 x 2.433
15.0 .285 x 2.485
20.0 .488 x 2.648
10 x 15.3 .240 x 2.600
20.0 .379 x 2.739
22.0 .312 x 3.500
25.0 .526 x 2.886
28.5 .425 x 3.950
30.0 .673 x 3.033
STEEL CHANNELS
ASTM A 3620 & 40 Ft. Lengths
449
Size & Depth Lbs. Web FlangeA per ft. t Width B
12 x 10.6 .190 x 1.500
20.7 .282 x 2.942
25.0 .387 x 3.047
30.0 .510 x 3.170
31.0 .370 x 3.670
35.0 .467 x 3.767
40.0 .590 x 3.890
13 x 31.8 .375 x 4.000
18 x 42.7 .450 x 3.950
45.8 .500 x 4.000
STEEL CHANNELS
ASTM A 3620 & 40 Ft. Lengths
450
Lbs. Depth Web FlangeSize per ft. A t B
4 x 13.0 4.16 x .280 x 4.060
5 x 16.0 5.01 x .240 x 5.000
18.9 5.00 x .316 x 5.003
19.0 5.15 x .270 x 5.030
6 x 9.0 5.90 x .170 x 3.940
12.0 6.03 x .230 x 4.000
15.0 5.99 x .230 x 5.990
16.0 6.28 x .260 x 4.030
20.0 6.20 x .260 x 6.020
25.0 6.38 x .320 x 6.080
8 x 10.0 7.89 x .170 x 3.940
13.0 7.99 x .230 x 4.000
15.0 8.11 x .245 x 4.015
18.0 8.14 x .230 x 5.250
21.0 8.28 x .250 x 5.270
24.0 7.93 x .245 x 6.495
28.0 8.06 x .285 x 6.535
31.0 8.00 x .285 x 7.995
35.0 8.12 x .310 x 8.020
40.0 8.25 x .360 x 8.070
STEEL BEAMSWide Flange
ASTM A 3620 & 40 Ft. Lengths
451
10 x 12.0 9.87 x .190 x 3.96
15.0 9.99 x .230 x 4.00
17.0 10.11 x .240 x 4.01
19.0 10.24 x .250 x 4.02
22.0 10.17 x .240 x 5.75
26.0 10.33 x .260 x 5.77
30.0 10.47 x .300 x 5.81
33.0 9.73 x .290 x 7.96
39.0 9.92 x .315 x 7.99
45.0 10.10 x .350 x 8.02
49.0 9.98 x .340 x 10.00
54.0 10.09 x .370 x 10.03
STEEL BEAMSWide Flange
ASTM A 3620 & 40 Ft. Lengths
Lbs. Depth Web FlangeSize per ft. A t B
452
Lbs. Depth Web FlangeSize per ft. A t B
STEEL BEAMSWide Flange
ASTM A 3620 & 40 Ft. Lengths
12 x 14.0 11.91 x .200 x 3.97
16.0 11.99 x .220 x 3.99
19.0 12.16 x .235 x 4.01
22.0 12.31 x .260 x 4.03
26.0 12.22 x .230 x 6.49
30.0 12.34 x .260 x 6.52
35.0 12.50 x .300 x 6.56
40.0 11.94 x .295 x 8.01
45.0 12.06 x .335 x 8.05
50.0 12.19 x .370 x 8.08
53.0 12.06 x .345 x 9.10
58.0 12.19 x .360 x 10.01
65.0 12.12 x .390 x 12.00
72.0 12.25 x .430 x 12.04
453
Lbs. Depth Web FlangeSize per ft. A t B14 x 22.0 13.74 x .230 x 5.00
26.0 13.91 x .255 x 5.03
30.0 13.84 x .270 x 6.73
34.0 13.98 x .285 x 6.75
38.0 14.10 x .310 x 6.77
43.0 13.66 x .305 x 7.10
48.0 13.79 x .340 x 8.03
53.0 13.92 x .370 x 8.06
61.0 13.98 x .375 x 9.10
68.0 14.04 x .415 x 10.03
74.0 14.17 x .450 x 10.07
82.0 14.31 x .510 x 10.13
90.0 14.02 x .440 x 14.52
99.0 14.16 x .485 x 14.56
109.0 14.32 x .525 x 14.60
16 x 26.0 15.69 x .250 x 5.50
31.0 15.88 x .275 x 5.53
36.0 15.86 x .295 x 6.99
40.0 16.01 x .305 x 6.10
45.0 16.13 x .345 x 7.04
50.0 16.26 x .380 x 7.07
57.0 16.43 x .430 x 7.12
67.0 16.33 x .395 x 10.23
STEEL BEAMSWide Flange
ASTM A 3620 & 40 Ft. Lengths
454
Lbs. Depth Web FlangeSize per ft. A t B18 x 35.0 17.70 x .300 x 6.00
40.0 17.90 x .315 x 6.02
46.0 18.06 x .360 x 6.06
50.0 17.99 x .355 x 7.50
55.0 18.11 x .390 x 7.53
60.0 18.24 x .415 x 7.56
STEEL BEAMSWide Flange
ASTM A 3620 & 40 Ft. Lengths
455
Flange Stem Thickness Est. lbs.A B t per ft.
STEEL TEESBar Size
ASTM A 3620 Ft. Lengths
1 1/2 1 1/2 3/16 1.90
1 1/2 1 1/2 1/4 2.43
1 3/4 1 3/4 3/16 2.16
2 2 1/4 3.62
2 1/2 2 1/2 1/4 4.60
PROCESSING &
DATA
YARDE METALS
PROCESSING &
DATAAluminum
General Alloy Classification . . . . . . . . . . . . . . . . . . . . . . . . 456Definitions for Sheet & Plate, Rod & Bar . . . . . . . . . . . . . . 457Temper Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 458Thermal Process for H tempers, T tempers . . . . . . . 459 - 462
Tolerances: Sheet & Plate . . . . . . . . . . . . . . . . . . 463 - 465Rod & Bar . . . . . . . . . . . . . . . . . . . . . 466 - 472
Stainless SteelMelting Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 473
Tolerances: Rod & Bar . . . . . . . . . . . . . . . . . . . . 474 - 475Sheet & Plate . . . . . . . . . . . . . . . . . . . . . . 476
Carbon SteelTolerances: Rod & Bar . . . . . . . . . . . . . . . . . . . . . . . . 477
Sheet & Plate . . . . . . . . . . . . . . . . . . . . . . 478
Brass & CopperTolerances: Rod & Bar . . . . . . . . . . . . . . . . . . . . . . . . 479
Sheet & Plate . . . . . . . . . . . . . . . . . . . . . . 479
Terms & Conditions of Sale . . . . . . . . . . . . . . . . . . . .480 - 482
Pages
PROCESSIN
G
456
ALUMINUM GUIDEHigh purity aluminum is soft and ductile. Most commer-cial use requires greater strength. This is achieved by theaddition of alloying elements to produce strength in themetal, thus classifying the alloys into two categories, non-heat treatable and heat treatable.
Non-heat treatable alloys - 1000, 3000, 5000 series -The initial strength of alloys in this group depends upon thehardening effect of elements such as manganese, silicon,iron and magnesium. Since these alloys are work-harden-able, further strengthening is made possible by variousdegrees of cold working, denoted by the "H" series of tem-pers.
Heat treatable alloys - 2000, 6000, 7000 series - The initial strength is enhanced by the addition of elementssuch as copper, magnesium, zinc, and silicon. Since theseelements show increasing solid solubility with increasingtemperature, it is possible to subject them to thermal treat-ments which will impart pronounced strengthening "T" tempers.
Clad alloys - The 2000 and 7000 alloys series are lessresistant to corrosive attack. To increase the corrosionresistance of these alloys in sheet and plate form they areoften clad, which is a metallurgical bonding of high purityaluminum on the base of the core metal. The cladding,usually from 2 1/2 to 5 percent of the total thickness oneach side, not only protects the composite due to its owninherently excellent corrosion resistance, but also exerts agalvanic effect, which further protects the core material.
457
ALUMINUM GUIDESHEET and PLATE
Sheet - A rolled product that is rectangular in cross sectionwith thickness less than .250 inch sheared or sawed edges.
Plate - A rolled product that is rectangular in cross sectionand with thickness .250 inches or greater with sheared orsawed edges.
ROD and BARWire: A round, square, rectangular, or hexagonal productdrawn to a maximum of .374-inch diameter (distance acrossparallel faces, or width).
Rod: Any round section of .375 inch or greater diameter.
Bar: Any square, rectangle, or hexagon cold drawn to a.375 inch or larger diameter. (the distance across parallelfaces, or width).
Cold Finished: Rod and bar are brought to final dimen-sions by cold rolling or drawing to obtain improved surfacefinish and closer dimensional tolerances.
Extruded Bar: Bar brought to final dimensions by pushingmaterial through a die.
458
TEMPER DESIGNATION
The temper designation system is used for all forms ofwrought and cast aluminum. The temper designation follows the alloy designation, the two being separated by ahyphen. Basic temper designations consist of letters. Subdivisions of the basic tempers, where required, are indicated by one or more digits following the letter.
BASIC TEMPER DESIGNATIONS
F as fabricated. Applies to the products of shaping processes in which no special control over thermal conditions or strain hardening is employed. For wrought products, there are no mechanical property limits.
O annealed. Applies to wrought products which are annealed to obtain the lowest strength temper. The O may be followed by a digit other than zero.
H strain hardened (wrought products only).Applies to products which have their strength increased by strain hardening, with or without supplementary thermal treatments to produce some reduction in strength. The H is always followed by two or more digits.
T thermally treated to produce stable tempers other than F, O or H. Applies to products which are thermally treated, with or without supplementary strain-hardening, to produce stable tempers. The T is always followed by one or more digits.
459
Solution heat treatment process designed to put the solubleelement or elements in solid solution. This is followed byrapid quenching. Usually in water, which momentarily"freezes" the structure and for a short time renders the alloyvery workable. At room or elevated temperature the alloysare not stable after quenching, however, precipitation ofthe constituents from the supersaturated solution begins.After a period of several days at room temperature precipi-tation, the alloy is considerably stronger. Many alloys ap-proach a stable condition at room temperature, but somealloys, particularly those containing magnesium and zinc,continue to age-harden for long periods of time at roomtemperature.
ARTIFICIAL AGINGor PRECIPITATION HARDENING
Heating for a controlled time at slightly elevated tempera-tures, even further strengthening is possible and propertiesare stabilized. By the proper combination of solution heattreatment, quenching, cold working and artificial aging, thehighest strengths are obtained.
ANNEALINGAll wrought aluminum alloys are available in annealed form.In addition, it may be desirable to anneal an alloy from anyother initial temper, after working, or between successivestages of working such as in deep drawing.
COLD COMPRESSEDCold compressing of thick aluminum plates in heat treatable alloys serves to reduce any residual stresses.The crystals are compressed in the direction of the thick-ness. According to the standard, the cold compressingdegree must lie between 1 - 5 percent.
THERMAL PROCESSINGSOLUTION HEAT TREATMENT
460
H TEMPER(NON - HEAT TREATABLE)
The 'first' digit following the H indicates the specific combination of basic operations, as follows:
H 1 strain hardened only. Applies to products which arestrain hardened to obtain the desired strength without supplementary thermal treatment. The number followingthis designation indicates the degree of strain hardening.
H 2 strain hardened and partially annealed. Applies toproducts which are strain hardened more than the desiredfinal amount and then reduced in strength to the desiredlevel by partial annealing. The number following this designation indicates the degree of strain hardeningremaining after the product has been partially annealed.
H 3 strain hardened and stabilized. Applies to products which are strain hardened and whosemechanical properties are stabilized by a low temperaturethermal treatment. The number following this designationindicates the degree of strain hardening remaining after thestabilization treatment.
The letter “H” is always followed by 2 or 3 digits. The firstdigit indicates the particular method used to obtain the temper, as follows:
H1 - strain hardened only.H2 - strain hardened, then partially annealed.H3 - strain hardened, then stabilized.
The temper is indicated by the second digit. For instance:
HX2 - 1/4 hardHX4 - 1/2 hardHX6 - 3/4 hardHX8 - full hardHX9 - extra hard
The third digit, if given, indicates a special control in onephase of the fabricating process. For instance:
H112 - applies to products which acquire some temper from shaping process not having special control over the amount of strain-hardening or thermal treatment, but for which there are mechanical properties.
461
Stress Relieved By Stretching
T_51 Applies to plate and rolled or cold finished rod orbar, die or ring forgings and rolled rings when stretched the indicated amounts after solution heat treatment or after cooling from an elevated temperature shaping process. The products receive no further straightening after stretching.
Plate.....................1 1/2 % to 3% permanent set.Rolled or Cold FinishedRod and Bar.........1 to 3% permanent set.Die or Ring Forgings and Rolled Rings.........1 to 5% permanent set.
T_510 Applies to extruded rod, bar, profiles (shapes) and tube and to drawn tube when stretched theindicated amounts after solution heat treatment or after cooling from an elevated temperature shaping process. These products receive no further straightening after stretching.
Extruded Rod Bar, Profiles (Shapes)and Tube..............1 % to 3% permanent set. Drawn Tube........1/2% to 3% permanent set.
T_511 Applies to extruded rod, bar, profiles (shapes) and tube and to drawn tube when stretched the indicated amounts after solution heat treatment or after cooling from elevated temperature shaping process. These products may receive minor straightening after stretching to comply with standard tolerances.
Extruded RodBar, Profiles (shapes)and Tube..............1 % to 3% permanent set.Drawn Tube........1/2% to 3% permanent set.
Stress Relieved By Compressing
T_52 Applies to products that are stress relieved by compressing after solution heat treatment or cooling from an elevated temperature shaping process to produce a permanent set of 1 percent to 5 percent.
T TEMPER(HEAT TREATABLE)
T3 Solution heat treated, then cold worked.
T351 Solution heat treated, naturally aged, stress relieved by stretching.
T3511 Minor straightening after stretching when neededto meet standard tolerances.
T36 Solution heat treated, then cold worked (controlled).
T4 Solution heat treated, then naturally aged.
T451 Solution heat treated, naturally aged, stress relieved by stretching.
T5 Cooled from an elevated temperature shaping process.
T6 Solution heat treated, then artificially aged.
T651 Solution heat treated, stress relieved by stretching, artificially aged.
T6511 Minor straightening after stretching when neededto meet standard tolerances.
T7 Solution heat treated, then stabilized.
T73 Special stress corrosion resistant temper.
T7351 Stress relieved T73 temper.
T73511 Minor straightening after stretching when needed to meet standard tolerances.
T8 Solution heat treated, cold worked, artificially aged.
T851 Solution heat treated, stress relieved by stretching, then artificially aged.
T9 Solution heat treated, artificially aged, then cold worked.
T91 Solution heat treated, artificially aged, then cold worked (controlled).
462
463
464
465
466
467
468
ALUMINUM STANDARD STRAIGHTNESS
Cold Finish Screw Machine Stock 3
When weight of piece on flat surface minimizes deviation
TX51 is a generated designation for the following stress-relieved tempers: T351, T451, T651, T851 and T7351.
Screw machine Stock is a classification of round and hexagonal wire, rod and bar in the specific alloys and tempers. It is furnished in 12 foot lengths with ends chamfered for high speed screw machine application.
All
.500 and over
All except TX51
TX51
.0125 .100
.0125 .100
.006
.008
.012
.006
.008
.012
.0005
.001
.0015
.0015
.002
.0025
.004
.006
.008
ALUMINUM STANDARD DIAMETERTOLERANCESCold Finished or Rolled
Wire, Rod and Bar
SPECIFIEDDIAMETER
INCHES
Up thru .035
.036 - .064
.065 - .0374
.375 - .500
.501 - 1.000
1.001 - 1.500
1.501 - 2.000
2.001 - 3.000
3.001 - 3.499
Tolerance - Inches Plus and Minus (Allowable Deviation from Specified Diameter)
Drawn Wire
ColdFinished Plus Minus
Rolled Rod
Specified Diameter (Rod)
Specified distanceacross flats
(Hexagonal Bar)In.
Temper
Tolerance in
Allowable deviation from straight
In any foot or less of
lengthIn 12 feet
2
2
2
1
3
1
469
Specified DistanceAcross Flats
ALUMINUM STANDARD DISTANCE ACROSS FLATS
Cold Finish or Rolled
Square, Hexagonal Wire and Bar
Tolerance Inches Plus and Minus
Allowable deviation from Specified distance Across Flats
.001
.0015
.002
.002
.0025
.003
.005
.008
.016
.020
.020
Drawn Cold RolledWire Finished Bar
Bar
Inches
Up thru .035
.036 - .064
.065 - .374
.375 - .500
.501 - 1.000
1.001 - 1.500
1.501 - 2.000
2.001 - 3.000
3.001 - 4.000
470
ALUMINUM STANDARD THICKNESS & WIDTH
Cold Finish or RolledRectangular Wire and Bar
SPECIFIEDTHICKNESSOR WIDTH
INCHES
Up thru .035
.036 - .064
.065 - .500
.501 - .750
.751 - 1.000
1.001 - 1.500
1.501 - 2.000
2.001 - 3.000
3.001 - 4.000
ToleranceIn. plus and minus
Allowable Deviation fromSpecified Thickness & Width
Drawn Wire andCold Finished bar Rolled Bar
.001
.0015
.002
.0025
.0025
.003
.005
.008
.002
.0025
.0025
.003
.005
.008
.010
.006
.008
.012
.016
.016
.020
.020
.016
.016
.016
.031
.031
.031
Thickness Width Thickness Width
W
T
471
Specified Diameter(Rod)
Specified DistanceAcross Flats
(Squares, Hexagons,and Octagons)
Specified Thickness(Rectangles)
In.
Allowable Deviation(D) from straight.
In total length or in any measured seg-ment of one ft. or
more of total length.
ALUMINUM STANDARD STRAIGHTNESSTOLERANCE
Rolled or Cold Finish
OTHER THAN SCREW MACHINE STOCK
Product Temper
All .050 x measuredlength, ft.
Rod andHex, Sq, Rec
Allexcept
0
ROLLED
COLD FINISH
All .025 x measuredlength, ft.
.500 & over .025 x measuredlength, ft.
All .025 x measuredlength, ft.
. .500 & over .050 x measuredlength, ft
Rod and HexBar
Square and Rectangular Bar
Allexcept 0& TX51
TX51
Allexcept 0and TX51
TX51
1
1
1
1
1 TX51 is a generated designation for the following stress-relieved tempers: T351, T451, T651, T851 and T7351
D
D
472
STAINLESS MELTING PROCESS
AOD: Argon Oxygen Decarburization Primarily melting occurs in direct electric arc furnaces,with the final refining process taking place in the AODunits.
A carefully controlled mixture of inert gas (argon and/ornitrogen) and oxygen is used to refine the stainless steelheats. This method offers better control of chemistry,improved cleanliness, a reduction of harmful residual elements and gas content in comparison with the standard arc furnace refining practices.
ESR: Electro Slag Remelting This process is essentially a solidification controlledprocess similar to consumable remelting. Its differencelies in the fact that a prepared electrode is remelted in awater-cooled copper crucible under a slag covering ratherthan in a vacuum. The ingot product is characterized bysuperior workability, improved cleanliness, and freedomfrom segregation.
VAR: Consumable Electrode Vacuum Arc RemeltingConsumable electrode vacuum remelting is essentially arefining and solidification control process. In this operation, prepared electrodes of a predetermined composition are vacuum remelted by an electric arc in awater-cooled crucible.
A principal advantage of the consumable electrodevacuum process lies in the controlled solidification of theingot in the water cooled crucible. The ingot becomes anexceptionally clean, sound and homogeneous material.The consumable electrode vacuum remelting processprovides premium quality material.
VIM: Vacuum Induction Melting Vacuum induction melting involves the operation of a conventional induction furnace with a zirconium or magnesium crucible in an evacuated pressure vessel.Very low chamber pressures are maintained during melting and the metal is cast in conventional molds.
The principal advantages of the VIM technique includethe close control of the composition, the ability to meltcompositions with high percentages of reactive elements,and the reduction of harmful inclusions, all of which contribute to the improvement of properties and forging characteristics.
473
474
Specified SizeInches
STAINLESS STEEL ROD & BAR SIZE TOLERANCES
Size, Inches
1/16 to 9/325/16 to 11/323/8 to 15/32
1/2 to 19/325/8 to 31/321 to 1 15/32
1 1/2 to 2 3/42 13/16 to 33 1/8 to 4
Tolerance - Plus or Minus Inch
.001
.0015
.0015
.002
.002
.0025
.003
.003
.003COLD FINISH BARS HEXAGONS AND SQUARES
COLD FINISH OR CENTERLESS GROUND ROUND BARS
3/32 to 5/16 excl.5/16 to 1/2 excl.1/2Over 1/2 to 1 incl.Over 1 to 2 incl.Over 2 to 3 incl.Over 3 to 4 incl.
Size Tolerance, InchesSquare or Hexagons
0000000
.002
.003
.004
.004
.006
.008
.010
Over Under
Width, Inches
COLD FINISH FLATS
3/8 to 1 incl.Over 1 to 2 incl.Over 2 to 3 incl.Over 3 to 4 1/2 incl.
Variation from widthover or under; in inches
.004
.006
.008
.010
.002
.003
.004
.005
For thicknesses1/4 inc. & under
For thicknessesOver 1/4 in.
Thickness Plus/Minus1/8 to 1 incl.Over 1 to 2 incl.Over 2 to 3 incl.Over 3 to 4 1/2 incl.
.002
.003
.004
.005
475
Over Under
.006
.007
.008
.009
.010
.011
.012
.0141/641/32
3/641/165/641/8
5/32
.006
.007
.008
.009
.010
.011
.012
.0141/64
0
00000
STAINLESS STEEL ROD & BARSIZE TOLERANCES
Specified Size, in
Over 5/16 to 7/16Over 7/16 to 5/8Over 5/8 to 7/8Over 7/8 to 1Over 1 to 1 1/8
Over 1 1/8 to 1 1/4Over 1 1/4 to 1 3/8Over 1 3/8 to 1 1/2Over 1 1/2 to 2Over 2 to 2 1/2
Over 2 1/2 to 3 1/2Over 3 1/2 to 4 1/2Over 4 1/2 to 5 1/2Over 5 1/2 to 6 1/2Over 6 1/2 to 8
Specified SizeInches
Over 1 1/2 to 2 incl.Over 2 to 2 1/2 incl.Over 2 1/2 to 3 1/2 incl.Over 3 1/2 to 4 1/2 incl.Over 4 1/2 to 5 1/2 incl.Over 5 1/2 to 6 1/2 incl.Over 6 1/2 to 8 incl.Over 8 to 10 incl.Over 10
Size Tolerance
1/641/323/641/165/641/8
5/321/43/8
1/6400000000
Over Under
SpecifiedWidthsInches
Up to 1 incl.Over 1 to 2 incl.Over 2 to 4 incl.Over 4 to 6 incl.Over 6 to 8 incl.Over 8 to 10 incl.
--
.062
.062
.062
.062
--
.031
.031
.031
.031
.015
.031
.062
.093
.125
.156
.015
.031
.031
.062
.156
.156
Thickness Tolerance, in., ForThickness Given Over and Under
WidthTolerances
Inc.
.008
.012
.015
.015
.016
.021
.010
.015
.020
.020
.025
.031
-.031.031.031.031.031
1/8 to 1/2incl.
Over 1/2to 1 incl.
Over 1to 2 incl.
Over 2 to 4 incl. Over Under
HOT FINISHED ROUNDS AND SQUARES
HOT ROLLED AND ROUGH TURNED ROUNDS
HOT ROLLED FLAT BAR
476
Thickness 72 Wide 96 Wide.188 to under .375
.375 to under .750
.750 to under 1.000
1.000 to under 2.000
2.000 to under 3.000
3.000 to under 4.000
4.000 to under 6.000
+.045-.010
+.055-.010
+.060-.010
+.070-.010
+.125-.010
+.175-.010
+.250-.010
+.050-.010
+.060-.010
+.065-.010
+.075-.010
+.150-.010
+.210-.010
+.300-.010
STAINLESS STEEL THICKNESS TOLERANCES
Plate
Thickness, In.Under, Incl. Gage 48 max Over 48
to 60Over 60
to 72
.1875 to .146
.146 to .131
.131 to .115
.115 to .099
.099 to .084
.084 to .073
.073 to .059
.059 to .041
.041 to .030
8 & 91011121314
15 & 1617 & 1920 to 22
.007
.006
.005
.005
.004
.004
.003
.003
.002
.0105
.009
.0075
.007
.006
.0055. .. .. .
.014
.012
.010
.009
.008
.007. .. .. .
STAINLESS STEEL THICKNESS TOLERANCES
Sheet Plus or Minus
477
ROUNDS
CARBON STEEL STANDARD TOLERANCES
Cold Finish Rod and Bar
Max. Carbon Range.28% or less
Max. Carbon RangeOver .28% to
.55% incl.
.002
.003
.004
.005
.006
.007
.008
.003
.004
.005
.006
.007
.008
.009
1 1/2 or underOver 1 1/2 & 2 1/2 incl. Over 2 1/2 to 4 incl.Over 4 to 6, incl.Over 6 to 8, incl.Over 8 to 9, incl.Over 9
All dimensions are “minus” variationsSize Range in Inches
HEXAGONS
Max. Carbon Range.28% or less
Max. Carbon RangeOver .28% to
.55% incl.
.002
.003
.004
.005
.005
.003
.004
.005
.006
.006
3/4 or underOver 3/4 to 1 1/2, incl.Over 1 1/2 to 2 1/2,incl.Over 2 1/2 to 3 1/8,
All dimensions are “minus” variationsSize Range in Inches
SQUARES
Max. Carbon Range.28% or less
Max. Carbon RangeOver .28% to
.55% incl.
.002
.003
.004
.006
.010
.014
.004
.005
.006
.008
3/4 or underOver 3/4 to 1 1/2, incl.Over 1 1/2 to 2 1/2, incl.Over 2 1/2 to 4, incl.Over 4 to 5, incl.Over 5 to 6 incl.
All dimensions are “minus” variationsSize Range in Inches
FLATS*
Max. Carbon Range.28% or less
Max. Carbon RangeOver .28% to
.55% incl.
.003
.004
.005
.006
.008
.013
.004
.005
.006
.008
.010
.015
To 3/4 incl.Over 3/4 to 1 1/2, incl.Over 1 1/2 to 3, incl.Over 3 to 4, incl.Over 4 to 6, incl.Over 6
All dimensions are “minus” variationsWidth in Inches
* Tolerances for flats apply to thickness as well as width.
478
+.030
+.030
+.030
+.060
+.090
+.110
+.150
+.240
+.290
+.100
+.040
+.040
+.070
+.110
+.130
CARBON STEEL THICKNESS TOLERANCES WIDTHS
PlateThickness
Permissible variation under specified thickness is .010
36 to59.99
60 to71.99
72 to83.99
84 to95.99
96 to107.99
1/4 to 9/16
5/8 to 11/16
3/4 to 15/16
1 to 1 15/16
2 to 2 15/16
3 to 3 15/16
4 to 5 15/16
6 to 9 15/16
10 to 11 15/16
CARBON STEEL THICKNESS TOLERANCES
Sheet
Gage Thickness*Equivalent Cold Roll HR
HRP&O Galvanized
11 ga
12 ga
13 ga
14 ga
16 ga
18 ga
20 ga
22 ga
24 ga
.120
.105
.090
.075
.060
.048
.036
.030
.024
+/-.006
+/-.006
+/-.005
+/-.005
+/-.005
+/-.004
+/-.003
+/-.003
+/-.003
+/-.008
+/-.008
+/-.007
+/-.007
+/-.007
+/-.006
-
-
-
+/-.009
+/-.009
+/-.008
+/-.008
+/-.006
+/-.005
+/-.004
+/-.004
+/-.004
*Thickness rounded to three places.
479
BRASS AND COPPER STANDARD TOLERANCES
Diameter or Distance between Parallel Surfaces of Cold Drawn Rod
Round Hexagonal
Up to .150, incl.Over .150 to .500, incl.Over .500 to 1.00, incl.Over 1.00 to 2.00 incl.Over 2.00 to 4.00 inclOver 4.00
.0013
.0015
.002
.0025
.15*
.125
.0025
.003
.004
.005
.30*-
Tolerance - Plus and Minus, InchDiameter or Distance
Between ParallelSurfaces, In
* Percent of specified diameter or distance between parallel surfaces expressed to the near- est .001 in.
BRASS AND COPPER STANDARD THICKNESS TOLERANCES
Sheet and Plate
Over 28 to 36 in. incl.in Width
Over 36 to 48 in. incl.in Width
Over .009 to .013, incl.Over .013 to .017, incl.Over .017 to .021, incl.Over .021 to .026, incl.Over .026 to .037, incl.Over .037 to .050, incl.Over .050 to .073, incl.Over .073 to .130, incl.Over .130 to .188, incl.
.003
.003
.0035
.0035
.004
.005
.006
.007
.008
.0035
.0035
.004
.004
.005
.006
.007
.008
.010
SHEET
Thickness, In.
Over 28 to 36 in. incl.in Width
Over 36 to 48 in. incl.in Width
Over .188 to .205, incl.Over .205 to .300, incl.Over .300 to .500, incl.Over .500 to .750, incl.Over .750 to 1.00, incl.Over 1.00 to 1.50, incl.Over 1.50 to 2.00, incl.
.008
.010
.013
.017
.021
.025
.030
.010
.012
.015
.019
.024
.029
.036
PLATE
Thickness, In.
480
TERMS AND CONDITIONS OF SALE
RETURNS OR EXCHANGES - Return shipments mustbe authorized by us in advance. Material which has been cutor otherwise processed by the buyer or to his order is notreturnable. All returned material will be subject to minimumrestocking charges.
Materials proving defective will be replaced, but no claims forlabor or damage allowed. Please inspect material promptly.Yarde Metals will not accept any returns or claims after 30days of receipt.
QUOTATIONS AND ORDERS - All quotations aresubject to change without notice, and are subject to continuedavailability of the quoted material. All sales are made subjectto strikes, accidents, or other causes of any kind beyond ourreasonable control. We will not consider an order to havebeen placed with us until full specifications identifying thematerial being ordered have been provided to us.
A buyer may not, except with our written consent, cancel anyorder for material which we have special ordered from themill.
We will, at a buyer’s request, provide our best estimate of theanticipated time of delivery of any order, but we will have noliability for any non-timely delivery.
Confirming orders should be marked “Confirmation,” prefer-ably across the face of the order. We may treat confirmingorders not so marked as additional original orders, and we will not be responsible for any resulting expense.
TITLE AND RISK OF LOSS - If material is shipped toa buyer via a carrier designated by the buyer, title and risk ofloss to the material shall pass to the buyer when the materialis loaded at our plant.
If material is shipped to a buyer via any other carrier, title andrisk of loss to the material shall pass to the buyer upon deliv-ery at the buyer’s plant and buyer’s release of the shippingdocuments. However, buyer must note any shortage or dam-age on both buyer’s copy and the carrier’s copy of the carri-er’s receipt, freight bill or delivery memo, and cause bothcopies to be signed by the carrier’s driver or representative. Ifbuyer does not do so, we will be responsible for any shortageor damage only (i) in the case of a carrier that is owned oroperated by or affiliated with us, if we establish to our reason-able satisfaction that there was in fact a shortage in the deliv-ery or that the damage occurred prior to receipt of the materi-al by buyer, as applicable, or (ii) in the case of any carrier thatis not owned or operated by or affiliated with us, if we are ableto recover for the shortage or damage from such carrier.
481
TECHNICAL ADVICE - None of our agents, employeesor representatives have any authority to bind us to any affir-mation, representation or warranty other than those statedherein or on our delivery receipt or invoice form. In particular,any technical advice we furnish with respect to the use ofmaterial is given without charge, and we assume no obligationor liability for the advice given or the results obtained, all suchadvice being given and accepted at buyer’s risk.
WARRANTY - We warrant that all material, at the time ofshipment by us, shall conform to specifications set forth onthe face of our delivery receipt or invoice and shall conform tothe description contained in the Certificate of Tests orCertificate of Compliance if either has been furnished by us inconnection with a sale. We do not warrant against any non-conformity to the extent that such non-conformity results fromdamage, misuse, abrasion, corrosion, negligence, accident,tampering, faulty installation, improper storage, inadequatemaintenance, or any other cause affecting the material afterthe shipment of the material.
We disclaim all other warranties with respect to material soldor services rendered, whether express or implied, includingthe warranties of merchantability and fitness of the material orservices for any particular purpose. By placing an order withus, a buyer affirms that the buyer has not relied upon the skillor judgment of us or any of our agents, employees or repre-sentatives to select or furnish material for any particular pur-pose, and the sale is made without any warranty by us thatthe material is suitable for any particular purpose.
Except for the specifications and certificates (if any) specifical-ly referred to above, any description of the material or servicecontained on our sales forms or any other correspondence isfor the sole purpose of identifying it and does not constitute awarranty that the material or service shall conform to thatdescription.
482
EXCLUSIVE REMEDY - We will at our option and as a buyer’s exclusive remedy, replace with new material, orrefund the purchase price for, material that in our opinion isdefective if the buyer gives written notice of the defect to uswithin 60 days after receipt. This exclusive remedy shall notbe deemed to have failed of its essential purpose so long aswe are willing and able to replace defective material or refund the purchase price within the time specified.UNDER NO CIRCUMSTANCES WILL WE BE RESPONSI-BLE FOR ANY OTHER DAMAGE, INCLUDING ANY DIRECTOR CONSEQUENTIAL DAMAGE OR LOSS, ARISING FROMCONTRACT, TORT OR OTHERWISE, INCLUDING, WITH-OUT LIMITING THE GENERALITY OF THE FOREGOING,LOSS OR DAMAGE TO BUILDINGS, CONTENTS, PROD-UCTS OR PERSONS. Buyer must immediately discontinueuse of any item claimed to be defective. No charge for laboror expense required to repair defective material or occasionedby it will be allowed.
LIMITATION OR ACTIONS - No action against us forbreach of any sales agreement may be brought more thanone year after the cause of action accrues.
ACCEPTANCE - Our sales are made pursuant to ourterms and conditions. If we receive a purchase order or otherdocument from a buyer that limits acceptance to its terms orstates that our acknowledgement, shipping of material, com-mencing work, or other act or failure to act constitutes accept-ance of an offer on the terms of the purchase order or otherdocument, no responding document sent by us shall be a def-inite and seasonable expression of acceptance of the buyer’soffer. In that event, our responding documents are intendedas a counteroffer, accepted when the buyer accepts shipmentof any of the material described. We hereby object to anyterm contained in a buyer’s purchase order or other documentif the term is different from or in addition to the terms herein.
YARDE METALSBRANCH LOCATIONS
Connecticut [email protected]
Florida [email protected]
New Hampshire [email protected]
New Jersey [email protected]
New York [email protected]
North Carolina [email protected]
Ohio [email protected]
Pennsylvania [email protected]
National Sales [email protected]
International [email protected]
www.yarde.com