Yamaha Rhino 700 660 450 6-12 Quad UTV ATV Baja Bars Bison
-
Upload
atventure-components -
Category
Documents
-
view
61 -
download
2
description
Transcript of Yamaha Rhino 700 660 450 6-12 Quad UTV ATV Baja Bars Bison
ATVenture Components Page 1 166-701WH
Fast And Easy
snoitcurtsnI noitallatsnI
Rhino Baja Frame Parts List
Brand: Yamaha
Model: Rhino
Year: 2008-2012
Product #: 166-701WH
Step 1: Remove the 3 screws and plastic threaded inserts from both back corners of the bed. These fasteners are not used to attach the baja frame.
Step 2: Remove Tie-down Anchor bolts from both front anchor points. These bolts are not used to attach the baja frame.
Step 3: Assemble the frame by attaching the crossbar to the left and right frame. (Parts used: 5/16” bolts and nylon locking nuts).
# Item Description Qty 1 Left Side Frame 1 2 Right Side Frame 1 3 1 rabssorC4 5/16” x 2” Bolt (Hex) 2 5 5/16” Nylon Locking Nut 2 6 5/16” x 1” Sheet Metal Screw 6 7 M6 x 30mm Metric Bolt (Hex) 4 8 M6 Nylon Locking Nut 4 9 M6 Flat Washer 8
ATVenture Components Page 2 166-701WH
Step 4: Cut and apply the protective tape, included with your frame, to the bottom of the back plates, to protect your bed side surface. Step 5: Place the roll bar frame in your Rhino bed, secure the front attachment plates and the original tie-down anchors to the wall of your Rhino bed. (Parts used: M6 bolts, nylon locking nuts, and flat washers).
Step 6: Secure the back plates of the frame to the Rhino bed. (Parts used: 5/16” screws)
Note: This product is not designed for roll-over protection to vehicle occupants in the event of a roll-over. The end user assumes all risk in the installation and use of this product.