Yamada 1

The standard in High Performance Air Operated Pumps

The difference in pumps

YOUR PARTNER FOR:

GROUP I- Air operated piston pumps- Air operated diaphragm pumps- Barrel diaphragm pumps- Electrical controlled diaphragm pumps- Chemline serie- Eco Greenline serie- High purity diaphragm pumps- Industrial PTFE pumps- Air operated industrial pumps- Electrical driven pumps

GROUP II- Waste oil products- Oil sets- Grease sets- Dispensing sets

GROUP III- Oil accessories- Grease accessories- DP accessories- Air accessories- Trolleys

FOR ALL KIND OF INDUSTRIES AND APPLICATIONS

CATALOGUEGROUP I

YAMADA EUROPE B.V.Aquamarijnstraat 50NL-7554 NS HengeloThe Netherlands

Tel. +31.74.2422032Fax +31.74.2421055

E-mail:[email protected]:www.yamada.nlwww.yamada-europe.com

. . . . . . . . .

. . . . . . . . . . . .

. . .

PORT SIZE: 1/4 , BSP Female thread, liquid in- and outlet1/4 , BSP Female thread, air inlet with ball valve

Material of air motor: PPS (Ryton)

MATERIALS: WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:

Aluminium PTFE (Teflon) Flat/SUS SUS PTFE

Capacity: max. 10 L/Min, 13 - 20 cc/cycle (discharge volume)Air pressure: 0,2 - 0,7 MpaMax. size of solids: less than 0,2 mm

NDP-05-FAT

AIR OPERATED DIAPHRAGM PUMPS NDP05


. . . . . . . . .

. . . . . . . . . . . .

. . .


PORT SIZE: , BSP Female thread, liquid in- and outlet , BSP Female thread, air inlet with ball valve



Polypropylene PTFE (Teflon) Flat/PTFE PPG PTFEPVC PTFE (Teflon) Flat/PTFE PVC PTFE

NDP-05-FPT

NDP-05-FXT


. . . . . . . . .

. . . . . . . . . . . .

. . .





Stainless Steel PTFE (Teflon) Flat/SUS SUS PTFENDP-05-FST


. . . . . . . . .

. . . . . . . . . . . .

. . .





PVDF (Kynar) PTFE (Teflon) Flat/PTFE PVDF PTFENDP-05-FVT

AIR OPERATED DIAPHRAGM PUMPS 0DP1

. . . . . . . . .

. . . . . . . . . . . .

. . .


Material of air motor: Aluminium

Same models in Polypropylene (PP), Stainless Steel (316), PTFE (Teflon), PVC

Capacity: max. 20 L/Min, 52 cc/cycle (discharge volume)Air pressure: 0,2 - 0,7 MpaMax. size of solids: less than 1,0 mm

MATERIALS WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:

Aluminium CR (Neoprene) Ball/CR ALU NBRAluminium EPDM (Nordel) Ball/EPDM ALU EPDMAluminium NBR (Nitrile) Ball/NBR ALU NBRAluminium TPEE (Hytrel) Ball/PTFE ALU PTFEAluminium TPO (Santoprene) Ball/EPDM ALU EPDMAluminium PTFE (Teflon) Ball/PTFE ALU PTFE

DP-10-BAC

DP-10-BAE

DP-10-BAN

DP-10-BAH

DP-10-BAS

DP-10-BAT

AIR OPERATED DIAPHRAGM PUMPS D 10P

. . . . . . . . .

. . . . . . . . . . . .

. . .

Same models in Aluminium (AL), Stainless Steel (316), PTFE (Teflon)



Polypropylene CR (Neoprene) Ball/CR CR NBRPolypropylene EPDM (Nordel) Ball/EPDM PP EPDMPolypropylene TPEE (Hytrel) Ball/PTFE PP PTFEPolypropylene NBR (Nitrile) Ball/NBR NBR NBRPolypropylene TPO (Santoprene) Ball/EPDM PP EPDMPolypropylene PTFE (Teflon) Ball/PTFE PTFE PTFEPVC PTFE (Teflon) Ball/PTFE PVC PTFE

DP-10-BPC

DP-10-BPE

DP-10-BPH

DP-10-BPN

DP-10-BPS

DP-10-BPT

DP-10-BXT



AIR OPERATED DIAPHRAGM PUMPS DP10

. . . . . . . . .

. . . . . . . . . . . .

. . .

Same models in Aluminium (AL), Polypropylene (PPG), PTFE (Teflon)



Stainless Steel CR (Neoprene) Ball/CR SUS NBRStainless Steel EPDM (Nordel) Ball/EPDM SUS EPDMStainless Steel TPEE (Hytrel) Ball/PTFE SUS PTFEStainless Steel NBR (Nitrile) Ball/NBR SUS NBRStainless Steel TPO (Santoprene) Ball/EPDM SUS EPDMStainless Steel PTFE (Teflon) Ball/PTFE SUS PTFE

DP-10-BSC

DP-10-BSE

DP-10-BSH

DP-10-BSN

DP-10-BSS

DP-10-BST




. . . . . . . . .

. . . . . . . . . . . .

. . .



Polypropylene CR (Neoprene) Ball/CR CR NBRPolypropylene EPDM (Nordel) Ball/EPDM PP EPDMPolypropylene TPEE (Hytrel) Ball/PTFE PP PTFEPolypropylene NBR (Nitrile) Ball/NBR NBR NBRPolypropylene TPO (Santoprene) Ball/EPDM PP EPDMPolypropylene PTFE (Teflon) Ball/PTFE PTFE PTFEPVC PTFE (Teflon) Ball/PTFE PVC PTFE

NDP-10-BPC

NDP-10-BPE

NDP-10-BPH

NDP-10-BPN

NDP-10-BPS

NDP-10-BPT

NDP-10-BXT




. . . . . . . . .

. . . . . . . . . . . .

. . .



Capacity: max. 45 L/Min,70 cc/cycle (discharge volume)Air pressure: 0,2 - 0,7 MpaMax. size of solids: less than 1,0 mm


Aluminium CR (Neoprene) Ball/CR ALU NBRAluminium NBR (Nitrile) Ball/NBR ALU NBRAluminium TPEE (Hytrel) Ball/PTFE ALU PTFEAluminium TPO (Santoprene) Ball/EPDM ALU EPDMAluminium PTFE (Teflon) Ball/PTFE ALU PTFE

NDP-15-BAC

NDP-15-BAN

NDP-15-BAH

NDP-15-BAS

NDP-15-BAT


. . . . . . . . .

. . . . . . . . . . . .

. . .



Stainless Steel CR (Neoprene) Ball/CR SUS NBRStainless Steel TPEE (Hytrel) Ball/PTFE SUS PTFEStainless Steel NBR (Nitrile) Ball/NBR SUS NBRStainless Steel TPO (Santoprene) Ball/EPDM SUS EPDMStainless Steel PTFE (Teflon) Ball/PTFE SUS PTFE

NDP-15-BSC

NDP-15-BSH

NDP-15-BSN

NDP-15-BSS

NDP-15-BST




. . . . . . . . .

. . . . . . . . . . . .

. . .



Polypropylene CR (Neoprene) Flat/PTFE PP NBRPolypropylene EPDM (Nordel) Flat/PTFE PP EPDMPolypropylene TPEE (Hytrel) Flat/PTFE PP PTFEPolypropylene NBR (Nitrile) Flat/PTFE PP NBRPolypropylene TPO (Santoprene) Flat/PTFE PP EPDMPolypropylene PTFE (Teflon) Flat/PTFE PP PTFEPVC PTFE (Teflon) Flat/PTFE PVC PTFE

NDP-15-FPC

NDP-15-FPE

NDP-15-FPH

NDP-15-FPN

NDP-15-FPS

NDP-15-FPT

NDP-15-FXT




. . . . . . . . .

. . . . . . . . . . . .

. . .

Capacity: max. 45 L/Min,70 cc/cycle (discharge volume)Air pressure: 0,2 - 0,5 MpaMax. size of solids: less than 1,0 mm




PVDF (Kynar) TPO (Santoprene) Flat/PTFE PVDF PTFEPVDF (Kynar) PTFE (Teflon) Flat/PTFE PVDF PTFE

NDP-15-FVS

NDP-15-FVT


. . . . . . . . .. . . . . . . . . . . .. . .

Capacity: max. 100 L/Min, 350 (rubber), 240 (PTFE) cc/cycle (discharge volume)Air pressure: 0,2 - 0,7 MpaMax. size of solids: less than 2,0 mm

MATERIALS WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:NDP-20-BPEX Polypropylene EPDM(Nordel) Ball/EPDM PP EPDMNDP-20-BPTUX Polypropylene PTFE/EPDM Ball/PTFE PP PTFE

PORT SIZE: 3/4, BSP Female thread, liquid in- and outlet 3/8, BSP Female thread, air inlet with ball valveMaterial of air motor: PP


. . . . . . . . .. . . . . . . . . . . .. . .

PORT SIZE: 3/4 , BSP Female thread, liquid in- and outlet 3/8 , BSP Female thread, air inlet with ball valveMaterial of air motor: Aluminium

MATERIALS: WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:NDP-20-BAC Aluminium CR (Neoprene) Ball/CR SUS NBRNDP-20-BAN Aluminium NBR (Nitrile) Ball/NBR SUS NBRNDP-20-BAE Aluminium EPDM (Nordel) Ball/EPDM SUS EPDMNDP-20-BAS Aluminium TPO (Santoprene) Ball/EPDM SUS EPDMNDP-20-BAH Aluminium TPEE (Hytrel) Ball/PTFE SUS PTFENDP-20-BATG Aluminium PTFE (Gore) Ball/PTFE SUS PTFENDP-20-BATU Aluminium PTFE/EPDM BONDED Ball/PTFE SUS PTFE

Capacity: max. 100 L/Min, 350 (rubber) 240 (PTFE) cc/cycle (discharge volume)Air pressure: 0,2 - 0,7 MpaMax. size of solids: less than 2,0 mm


. . . . . . . . .. . . . . . . . . . . .. . .

Capacity: max. 100 L/Min, 350 cc (rubber), 240 cc (PTFE)/cycle (discharge volume)Air pressure: 0,2 - 0,5 MpaMax. Size of solids: less than 2,0 mm


NDP-20-BPC Polypropylene CR (Neoprene) Ball/CR PP NBRNDP-20-BPE Polypropylene EPDM (Nordel) Ball/EPDM PP EPDMNDP-20-BPH Polypropylene TPEE (Hytrel) Ball/PTFE PP PTFENDP-20-BPN Polypropylene NBR (Nitrile) Ball/NBR PP NBRNDP-20-BPS Polypropylene TPO (Santoprene) Ball/EPDM PP EPDMNDP-20-BPTU Polypropylene PTFE/EPDM BONDED Ball/PTFE PP PTFENDP-20-BXT PVC PTFE (Teflon) Ball/PTFE PVC PTFE



. . . . . . . . .. . . . . . . . . . . .. . .



NDP-20-BSC Stainless Steel CR (Neoprene) Ball/CR SUS NBRNDP-20-BSN Stainless Steel NBR (Nitrile) Ball/NBR SUS NBRNDP-20-BSE Stainless Steel EPDM (Nordel) Ball/EPDM SUS EPDMNDP-20-BSS Stainless Steel TPO (Santoprene) Ball/EPDM SUS EPDMNDP-20-BSH Stainless Steel TPEE (Hytrel) Ball/PTFE SUS PTFENDP-20-BSTU Stainless Steel PTFE/EPDM BONDED Ball/PTFE SUS PTFE



. . . . . . . . .. . . . . . . . . . . .. . .


MATERIALS WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:NDP-25-BPEX Polypropylene EPDM (Nordel) Ball/EPDM PP EPDMNDP-25-BPSX Polypropylene TPO (Santoprene) Ball/PTFE PP EPDMNDP-25-BPTUX Polypropylene PTFE/EPDM Ball/PTFE PP PTFE

NDP-25-BVTUX PVDF (Kynar) PTFE/EPDM Ball/PTFE PVDF PTFE

PORT SIZE: 1, BSP Female thread, liquid in- and outlet 3/8, BSP Female thread, air inlet with ball valveMaterial of air motor: PP


. . . . . . . . .. . . . . . . . . . . .. . .

Capacity: max. 160 L/Min, 600 (rubber) 500 (PTFE) cc/cycle (discharge volume)Air pressure: 0,7 MPaMax. size of solids: less than 3,0 mm

MATERIALS WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:NDP-25-BAC Aluminium CR (Neoprene) Ball/CR SUS NBRNDP-25-BAN Aluminium NBR (Nitrile) Ball/NBR SUS NBRNDP-25-BAE Aluminium EPDM (Nordel) Ball/EPDM SUS EPDMNDP-25-BAS Aluminium TPO (Santoprene) Ball/EPDM SUS EPDMNDP-25-BAH Aluminium TPEE (Hytrel) Ball/PTFE SUS PTFENDP-25-BATU Aluminium PTFE/EPDM BONDED Ball/PTFE SUS PTFE

PORT SIZE: 1 , BSP Female thread, liquid in- and outlet 3/8 , BSP Female thread, air inlet with ball valveMaterial of air motor: Aluminium


. . . . . . . . .. . . . . . . . . . . .. . .


MATERIALS WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:NDP-25-BFC Cast Iron CR (Neoprene) Ball/CR SUS NBRNDP-25-BFE Cast Iron EPDM (Nordel) Ball/EPDM SUS EPDMNDP-25-BFN Cast Iron NBR (Nitrile) Ball/NBR SUS NBRNDP-25-BFS Cast Iron TPO (Santoprene) Ball/EPDM SUS EPDMNDP-25-BFTU Cast Iron PTFE (Teflon) Ball/PTFE SUS PTFE

PORT SIZE: 1, BSP Female thread, liquid in- and outlet 3/8 , BSP Female thread, air inlet with ball valveMaterial of air motor: Aluminium


. . . . . . . . .. . . . . . . . . . . .. . .

Capacity: max. 160 L/Min, 600 cc (rubber), 500 cc (PTFE)/cycle (discharge volume)Air pressure: 0,2 - 0,5 MpaMax. size of solids: less than 3,0 mm

MATERIALS WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:NDP-25-BPC Polypropylene CR (Neoprene) Ball/CR PP NBRNDP-25-BPE Polypropylene EPDM (Nordel) Ball/EPDM PP EPDMNDP-25-BPH Polypropylene TPEE (Hytrel) Ball/PTFE PP PTFENDP-25-BPN Polypropylene NBR (Nitrile) Ball/NBR PP NBRNDP-25-BPS Polypropylene TPO (Santoprene) Ball/EPDM PP EPDMNDP-25-BPTU Polypropylene PTFE/EPDM BONDED Ball/PTFE PP PTFE

NDP-25-BXT PVC PTFE (Teflon) Ball/PTFE PVC PTFE



. . . . . . . . .. . . . . . . . . . . .. . .

Capacity: max. 160 L/Min, 600 (rubber) 500 (PTFE) cc/cycle (discharge volume)Air pressure: 0,2 - 0,7 MpaMax. Size of solids: less than 3,0 mm

MATERIALS WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:NDP-25-BSC Stainless Steel CR (Neoprene) Ball/CR SUS NBRNDP-25-BSE Stainless Steel EPDM (Nordel) Ball/EPDM SUS EPDMNDP-25-BSH Stainless Steel TPEE (Hytrel) Ball/PTFE SUS PTFENDP-25-BSN Stainless Steel NBR (Nitrile) Ball/NBR SUS NBRNDP-25-BSS Stainless Steel TPO (Santoprene) Ball/EPDM SUS EPDMNDP-25-BSTU Stainless Steel PTFE/EPDM BONDED Ball/PTFE SUS PTFE



. . . . . . . . .. . . . . . . . . . . .. . .

Capacity: max. 160 L/Min, 500 cc/cycle (discharge volume)Air pressure: 0,2 - 0,5 MPaMax. size of solids: less than 3,0 mm



NDP-25-BVS PVDF (Kynar) TPO (Santoprene) Ball/EPDM PVDF PTFENDP-25-BVTU PVDF (Kynar) PTFE/EPDM BONDED PTFE PVDF PTFE


. . . . . . . . .. . . . . . . . . . . .. . .


MATERIALS WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:NDP-40-BAC Aluminium CR (Neoprene) Ball/CR CR NBRNDP-40-BAN Aluminium NBR (Nitrile) Ball/NBR NBR NBRNDP-40-BAE Aluminium EPDM (Nordel) Ball/EPDM EPDM EPDMNDP-40-BAS Aluminium TPO (Santoprene) Ball/EPDM TPO EPDMNDP-40-BAH Aluminium TPEE (Hytrel) Ball/PTFE TPEE PTFENDP-40-BAT Aluminium PTFE (Teflon) Ball/PTFE ALU PTFE

PORT SIZE: 1 , DIN Flange, liquid in- and outlet , BSP Female thread, air inlet with ball valveMaterial of air motor: Aluminium


. . . . . . . . .. . . . . . . . . . . .. . .

Capacity: max. 450 L/Min, 2.800 (rubber) 1.400 (PTFE) cc/cycle (discharge volume)Air pressure: 0,2 - 0,7 MpaMax. size of solids: less than 7,0 mm

MATERIALS WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:NDP-40-BFC Cast Iron CR (Neoprene) Ball/CR SUS NBRNDP-40-BFE Cast Iron EPDM (Nordel) Ball/EPDM SUS EPDMNDP-40-BFH Cast Iron TPEE (Hytrel) Ball/PTFE SUS PTFENDP-40-BFN Cast Iron NBR (Nitrile) Ball/NBR SUS NBRNDP-40-BFS Cast Iron TPO (Santoprene) Ball/EPDM SUS EPDMNDP-40-BFT Cast Iron PTFE (Teflon) Ball/PTFE SUS PTFE

PORT SIZE 1 1/2 , BSP Female thread, liquid in- and outlet 1/2 , BSP Female thread, air inlet with ball valveMaterial of air motor: Aluminium


. . . . . . . . .. . . . . . . . . . . .. . .


MATERIALS WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:NDP-40-BPC Polypropylene CR (Neoprene) Ball/CR PP NBRNDP-40-BPE Polypropylene EPDM (Nordel) Ball/EPDM PP EPDMNDP-40-BPH Polypropylene TPEE (Hytrel) Ball/PTFE PP PTFENDP-40-BPN Polypropylene NBR (Nitrile) Ball/NBR PP NBRNDP-40-BPS Polypropylene TPO (Santoprene) Ball/EPDM PP EPDMNDP-40-BPT Polypropylene PTFE (Teflon) Ball/PTFE PP PTFE

PORT SIZE: 1 1/2 , DIN Flange, liquid in- and outlet 1/2 , BSP Female thread, air inlet with ball valveMaterial of air motor: Aluminium


. . . . . . . . .. . . . . . . . . . . .. . .


MATERIALS WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:NDP-40-BSC Stainless Steel CR (Neoprene) Ball/CR CR NBRNDP-40-BSE Stainless Steel EPDM (Nordel) Ball/EPDM EPDM EPDMNDP-40-BSH Stainless Steel TPEE (Hytrel) Ball/PTFE TPEE PTFENDP-40-BSN Stainless Steel NBR (Nitrile) Ball/NBR NBR NBRNDP-40-BSS Stainless Steel TPO (Santoprene) Ball/EPDM TPO EPDMNDP-40-BST Stainless Steel PTFE (Teflon) Ball/PTFE SUS PTFE

PORT SIZE 1 1/2 , DIN Flange, liquid in- and outlet 1/2 , BSP Female thread, air inlet with ball valveMaterial of air motor: Aluminium


. . . . . . . . .. . . . . . . . . . . .. . .


MATERIALS WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:NDP-50-BAC Aluminium CR (Neoprene) Ball/CR CR NBRNDP-50-BACR Aluminium CR (Neoprene) Ball/CR CR NBRNDP-50-BAN Aluminium NBR (Nitrile) Ball/NBR NBR NBRNDP-50-BANR Aluminium NBR (Nitrile) Ball/NBR NBR NBRNDP-50-BAE Aluminium EPDM (Nordel) Ball/EPDM EPDM EPDMNDP-50-BAS Aluminium TPO (Santoprene) Ball/EPDM TPO EPDMNDP-50-BAH Aluminium TPEE (Hytrel) Ball/PTFE TPEE PTFENDP-50-BAT Aluminium PTFE (Teflon) Ball/PTFE ALU PTFE

PORT SIZE: 2 , DIN Flange, liquid in- and outlet -R models are equipped with flange and BSP thread

3/4 , BSP Female thread, air inlet with ball valveMaterial of air motor: Aluminium


. . . . . . . . .. . . . . . . . . . . .. . .


MATERIALS WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:NDP-50-BFC Cast Iron CR (Neoprene) Ball/CR CR NBRNDP-50-BFE Cast Iron EPDM (Nordel) Ball/EPDM EPDM EPDMNDP-50-BFH Cast Iron TPEE (Hytrel) Ball/PTFE TPEE PTFENDP-50-BFN Cast Iron NBR (Nitrile) Ball/NBR NBR NBRNDP-50-BFS Cast Iron TPO (Santoprene) Ball/EPDM TPO EPDMNDP-50-BFT Cast Iron PTFE (Teflon) Ball/PTFE SUS PTFE



. . . . . . . . .. . . . . . . . . . . .. . .



PORT SIZE: 2 , DIN Flange, liquid in- and outlet 3/4 , BSP Female thread, air inlet with ball valveMaterial of air motor: Aluminium


. . . . . . . . .. . . . . . . . . . . .. . .


MATERIALS WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:NDP-50-BSC Stainless Steel CR (Neoprene) Ball/CR CR NBRNDP-50-BSE Stainless Steel EPDM (Nordel) Ball/EPDM EPDM EPDMNDP-50-BSH Stainless Steel TPEE (Hytrel) Ball/PTFE TPEE PTFENDP-50-BSN Stainless Steel NBR (Nitrile) Ball/NBR NBR NBRNDP-50-BSS Stainless Steel TPO (Santoprene) Ball/EPDM TPO EPDMNDP-50-BST Stainless Steel PTFE (Teflon) Ball/PTFE SUS PTFE


AIR OPERATED DIAPHRAGM PUMPS NDP 50

. . . . . . . . .

. . . . . . . . . . . .

. . .

Capacity: max. 650 L/Min, 2.100 cc/cycle (discharge volume)Air pressure: 0,2 - 0,5 MPaMax. size of solids: less than 8,0 mm

PORT SIZE: 2 , DIN Flange, liquid in- and outlet3/4 , BSP Female thread, air inlet with ball valve



PVDF (Kynar) TPO (Santoprene) Ball/PTFE PTFE EPDMPVDF (Kynar) PTFE (Teflon) Ball/PTFE PTFE PTFE

NDP-50-BVS

NDP-50-BVT


. . . . . . . . .. . . . . . . . . . . .. . .

Capacity: max. 800 L/Min, 8500 (rubber) 3.800 (PTFE) cc/cycle (discharge volume)Air pressure: 0,2 - 0,7 MpaMax. size of solids: less than 10,0 mm

MATERIALS WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:NDP-80-BAC Aluminium CR (Neoprene) Ball/CR CR NBRNDP-80-BAE Aluminium EPDM (Nordel) Ball/EPDM EPDM EPDMNDP-80-BAH Aluminium TPEE (Hytrel) Ball/PTFE TPEE PTFENDP-80-BAN Aluminium NBR (Nitrile) Ball/NBR NBR NBRNDP-80-BAS Aluminium TPO (Santoprene) Ball/EPDM TPO EPDMNDP-80-BAT Aluminium PTFE (Teflon) Ball/PTFE ALU PTFE



. . . . . . . . .. . . . . . . . . . . .. . .


MATRIALS WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:NDP-80-BFC Cast Iron CR (Neoprene) Ball/CR CR NBRNDP-80-BFE Cast Iron EPDM (Nordel) Ball/EPDM EPDM EPDMNDP-80-BFH Cast Iron TPEE (Hytrel) Ball/PTFE TPEE PTFENDP-80-BFN Cast Iron NBR (Nitrile) Ball/NBR NBR NBRNDP-80-BFS Cast Iron TPO (Santoprene) Ball/EPDM TPO EPDMNDP-80-BFT Cast Iron PTFE (Teflon) Ball/PTFE SUS PTFE



. . . . . . . . .. . . . . . . . . . . .. . .





. . . . . . . . .. . . . . . . . . . . .. . .


MATERIALS WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:NDP-80-BSC Stainless Steel CR (Neoprene) Ball/CR CR NBRNDP-80-BSE Stainless Steel EPDM (Nordel) Ball/EPDM EPDM EPDMNDP-80-BSH Stainless Steel PTFE (Teflon) Ball/PTFE TPEE PTFENDP-80-BSN Stainless Steel NBR (Nitrile) Ball/NBR NBR NBRNDP-80-BSS Stainless Steel TPO (Santoprene) Ball/EPDM TPO EPDMNDP-80-BST Stainless Steel PTFE (Teflon) Ball/PTFE SUS PTFE


AIR OPERATED DIAPHRAGM PUMPSBARREL TYPE

. . . . . . . . .

. . . . . . . . . . . .

. . .

PORT SIZE: 3/8, BSP Female thread, liquid in- and outlet1/4, BSP Female thread, air inlet with ball valve

Material of air motor: AluminiumIncluding: 900 mm suction tube, bung lock adapter


Aluminium NBR (Nitrile) Ball/NBR ALU NBRPolypropylene NBR (Nitrile) Ball/NBR PP NBRPolypropylene TPO (Santoprene) Ball/EPDM PP EPDM

BDP-10-BAN

BDP-10-BPN

BDP-10-BPS

Capacity: max. 20 L/Min, 52 cc/cycle (discharge volume)Air pressure: 0,2 - 0,7 Mpa, 0,2 - 0,5 MpaMax. size of solids: less than 1,0 mm

AIR OPERATED DIAPHRAGM PUMPSBARREL TYPE

. . . . . . . . .

. . . . . . . . . . . .

. . .

PORT SIZE: 1/2, BSP Female thread, liquid in- and outlet1/4, BSP Female thread, air inlet with ball valve

Material of air motor: PPS (Ryton)Including: 900 mm suction tube, bung lock adapter


Polypropylene PTFE (Teflon) Ball/FPM PPG PTFEBNDP-12-BPT


AIR OPERATED DIAPHRAGM PUMPS BARREL TYPE

. . . . . . . . .. . . . . . . . . . . .. . .

PORT SIZE: 1, BSP Female thread, liquid inlet3/4, BSP Female thread, liquid outlet3/8, BSP Female thread, air inlet with ball valve


MATERIALS: WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:BDP-20-BAE Aluminium EPDM (Nordel) Ball/EPDM SUS EPDMBDP-20-BAH Aluminium TPEE (Hytrel) Ball/PTFE SUS PTFEBDP-20-BATU Aluminium PTFE/EPDM Ball/PTFE SUS PTFEBDP-20-BPH Polypropylene TPEE (Hytrel) Ball/PTFE PP PTFEBDP-20-BPN Polypropylene NBR (Nitrile) Ball/NBR PP NBRBDP-20-BSH Stainless Steel TPEE (Hytrel) Ball/PTFE SUS PTFEBDP-20-BSTU Stainless Steel PTFE/EPDM Ball/PTFE SUS PTFE

Capacity: max. 100 L/Min, 350 (rubber), 240 (PTFE) cc/cycle (discharge volume)Air pressure: 0,2 - 0,7 Mpa (rubber), 0,2 - 0,5 Mpa (PTFE)Max. size of solids: less than 2,0 mm

AIR OPERATED DIAPHRAGM PUMPS BARREL TYPE

. . . . . . . . .. . . . . . . . . . . .. . .

PORT SIZE: 1, BSP Female thread, liquid inlet 1, BSP Female thread, liquid outlet3/8, BSP Female thread, air inlet with ball valve



BDP-25-BAN Aluminium NBR (Nitrile) Ball/NBR SUS NBRBDP-25-BSTU Stainless Steel PTFE/EPDM Ball/PTFE SUS PTFE

Capacity: max. 160 L/Min, 600 (rubber), 500 (PTFE) cc/cycle (discharge volume)Air pressure: 0,2 - 0,7 Mpa (rubber), 0,2 - 0,5 Mpa (PTFE)Max. size of solids: less than 3,0 mm

AIR OPERATED DIAPHRAGM PUMPS EDP1 electrical controlled

. . . . . . . . .. . . . . . . . . . . .. . .

MATERIALS WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:EDP1-05-FPT Polypropylene PTFE (Teflon) Flat/PTFE PTFE PTFEEDP1-10-BPE Polypropylene EPDM (Nordel) Ball/EPDM EPDM PTFE

EDP1-20-BPE Polypropylene EPDM (Nordel) Ball/EPDM EPDM PTFEEDP1-20-BPTU Polypropylene PTFE/EPDM Ball/PTFE PTFE PTFE

EDP1-25-BPS Polypropylene TPO (Santoprene) Ball/EPDM EPDM EPDM

PORT SIZE: 1/4, 3/8, 3/4, 1 female thread, liquid in- and outlet 1/4, 1/4, 3/8, 3/8 air inlet via solenoid valveMaterial of air motor: PPS {(Ryton) 1/4, 3/8}

Aluminium 3/4, 1

EDP1 05 EDP1 10 EDP1 20 EDP1 25Capacity: 10 L/min 15 L/min 100 L/min 160 L/minAir pressure: 0,2 - 0,5 MPaMax. size of solids: < 0,2 mm < 1,0 mm < 2 mm < 3 mm

AIR OPERATED DIAPHRAGM PUMPS EDP1 electrical controlled

. . . . . . . . .. . . . . . . . . . . .. . .


EDP1-05-FST Stainless Steel PTFE (Teflon) Flat/SUS SUS PTFEEDP1-20-BSTU Stainless Steel PTFE/EPDM) Ball/PTFE SUS PTFE Other types on request

PORT SIZE: 1/4, 3/4 female thread, liquid in- and outlet 1/4, 3/8 air inlet via solenoid valveMaterial of air motor: PPS {(Ryton) 1/4}

Aluminium 3/4

EDP1 05 EDP1 20Capacity: 10 L/min 100 L/minAir pressure: 0,2 - 0,7 MpaMax. size of solids: < 0,2 mm < 2 mm

AIR OPERATED DIAPHRAGM PUMPS CDP20CHEM LINE

Capacity: max. 100 L/Min, 240 cc per cycle (discharge volume)Air pressure: 0,2 - 0,7 MpaMax. size of solids: less than 2,0 mm


Material of air motor: Aluminium with epoxy coating (blue)


Electropolished SS PTFE/EPDM Ball/PTFE SUS PTFEBONDED

CDP-20-BST

AIR OPERATED DIAPHRAGM PUMPS CDP25 CHEM LINE

. . . . . . . . .. . . . . . . . . . . .. . .


PORT SIZE: 1, BSP Female thread, liquid in- and outlet 3/8, BSP Female thread, air inlet with ball valveMaterial of air motor: Aluminium with epoxy coating (blue)

MATERIALS: WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:CDP-25-BST* Electropolished SS PTFE/EPDM Ball/PTFE SUS PTFE

BONDED

AIR OPERATED DIAPHRAGM PUMPS (N)DP12 ECO GREEN LINE

. . . . . . . . .. . . . . . . . . . . .. . .

Capacity: max. 20 L/Min, 52 cc/cycle (discharge volume)Air pressure: 0,2 - 0,7 Mpa (only Polypropylene 0,2 - 0,5 Mpa)Max. size of solids: less than 1,0 mm

PORT SIZE: 1/2 , BSP Female thread, liquid in- and outlet 1/4 , BSP Female thread,air inlet with ball valveMaterial of air motor: Aluminium (DP12 series)

MATERIALS: WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:DP-12-BAN Aluminium NBR (Nitrile) Ball/NBR NBR NBRDP-12-BPS Polypropylene TPO (Santoprene) Ball/EPDM PP EPDMDP-12-BST Stainless Steel PTFE (Teflon) Ball/PTFE SUS PTFE

Suction Tube SetArt. No. 02-1201 for DP-12-BANArt. No. 02-1202 for DP-12-BPSArt. No. 02-1203 for DP-12-BST

AIR OPERATED DIAPHRAGM PUMPS NDP22ECO GREEN LINE

. . . . . . . . .

. . . . . . . . . . . .

. . .


PORT SIZE: 1, BSP Female thread, liquid in- and outlet3/8, BSP Female thread,air inlet with ball valve



Aluminium NBR (Nitrile) Ball/NBR SUS NBRStainless Steel PTFE (Teflon) Ball/PTFE SUS PTFE

NDP-22-BAN

NDP-22-BST

AIR OPERATED DIAPHRAGM PUMPS DP05 High Purity

. . . . . . . . .. . . . . . . . . . . .. . .

Capacity: max. 11 L/Min, 13 mL/cycle (discharge volume)Air pressure: 0,15 - 0,5 MpaMax. size of solids: not applicable

PORT SIZE: , RC Female thread, liquid in- and outlet , RC Female thread, air inletMaterial of air motor: PPS (Ryton)Center rod and center disc (non wetted part): SUS316


DP-5FPT FLAT PTFE (Teflon) PTFE (Teflon) Flat/PTFE PTFE PTFE 853-656previous 851-498 internal air system


. . . . . . . . .. . . . . . . . . . . .. . .


PORT SIZE: 3/8 , NPT, RC Female thread, liquid in- and outlet 1/4 , RC Female thread, air inletMaterial of air motor: PPCenter rod and center disc (non wetted part): SUS316


DP-10FRc (853620 PTFE (Teflon) PTFE (Teflon) Ball/PTFE PTFE PTFE (internal air system)


. . . . . . . . .. . . . . . . . . . . .. . .


PORT SIZE: JIS 10K10 Flange, liquid in- and outlet 1/4, RC Female thread, air inletMaterial of air motor: PPCenter rod and center disc (non wetted part): SUS316


DP-10FFL (853622)PTFE(Teflon) PTFE (Teflon) Ball/PTFE PTFE PTFE (internal air system)


. . . . . . . . .. . . . . . . . . . . .. . .


PORT SIZE: 3/4 , NPT or RC Female thread, liquid in- and outlet 1/4 , RC Female thread, air inletMaterial of air motor: PPCenter rod and center disc (non wetted part): SUS316


DP-20FRC(853621) PTFE (Teflon) PTFE (Teflon) Ball/PTFE PTFE PTFE (internal air system)

DP-20FEPT(853613) PTFE (Teflon) PTFE (Teflon) Ball/PTFE PTFE PTFE (external airsystem)


. . . . . . . . .. . . . . . . . . . . .. . .


PORT SIZE: JIS 10K20A, 3/4" flaretek liquid in- and outlet 1/4 , RC Female thread, air inletMaterial of air motor: PPCenter rod and center disc (non wetted parts): SUS316


DP-20FFL (853623) PTFE (Teflon) PTFE (Teflon) Ball/PTFE PTFE PTFE (internal air system)

DP-20FEFT(852359) PTFE (Teflon) PTFE (Teflon) Flat/PTFE PTFE PTFE (external airsystem)


. . . . . . . . .. . . . . . . . . . . .. . .

Capacity: max. 64 L/Min, 300 mL/cycle (discharge volume)Air pressure: 0,15 - 0,7 MPaMax. size of solids: not applicable

PORT SIZE: JIS 10K25A Flange connection, liquid in- and outlet 3/8, RC Female thread, air inletMaterial of air motor: HDPECenter rod and center disc (non wetted parts): SUS316.

MATERIALS: WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:DP-25FFL (853601) PTFE (Teflon) PTFE (Teflon) Ball/PTFE PTFE PTFE (internal air system)

DP-25FEFL(852616)PTFE (Teflon) PTFE (Teflon) Flat/PTFE PTFE PTFE (external air system)

. . . . . . . . .. . . . . . . . . . . .. . .


MATERIALS: WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:DP-38FFT (853606) PTFE (Teflon) PTFE (Teflon) Ball/PTFE PTFE PTFE (internal air system)

DP-38FEFL(853482) PTFE (Teflon) PTFE (Teflon) Flat/PTFE PTFE PTFE (external air system)


PORT SIZE: JIS 10K25A, Flange, 1" flaretek liquid in- and outlet 1/2, RC Female thread, air inlet

Material of air motor: HDPECenter rod and center disc (non wetted parts): SUS316

AIR OPERATED DIAPHRAGM PUMPS DP10F/N HIGH PURITY NON METALLIC SERIES

. . . . . . . . .. . . . . . . . . . . .. . .


PORT SIZE: 3/8 RC, NPT or JIS 10K10A flange liquid in- and outlet 1/4 , RC Female thread, air inletMaterial of air motor: PPCenter rod and center disc (non wetted parts): PPSNON METALLIC PUMP WITH EXTERNAL AIR SYSTEM


DP-10FNRC (853499) PTFE (Teflon) PTFE (Teflon) Ball/PTFE PTFE PTFEDP-10FNFL (853500) PTFE (Teflon) PTFE (Teflon) Ball/PTFE PTFE PTFE

AIR OPERATED DIAPHRAGM PUMPS DP20F/N HIGH PURITY NON METALLIC SERIES

. . . . . . . . .. . . . . . . . . . . .. . .


PORT SIZE: 3/4 RC, NPT or JIS 10K20A flange liquid in- and outlet 1/4 , RC Female thread, air inletMaterial of air motor: PPCenter rod and center disc (non wetted parts): PPSNON METALLIC PUMP WITH EXTERNAL AIR SYSTEM


DP-20FNRC (853437) PTFE (Teflon) PTFE (Teflon) Ball/PTFE PTFE PTFEDP-20FNFL (853438) PTFE (Teflon) PTFE (Teflon) Ball/PTFE PTFE PTFE

. . . . . . . . .

. . . . . . . . . . . .

. . .





PTFE (Teflon) PTFE (Teflon) Flat/PTFE PTFE PTFENDP-05-FTT

AIR OPERATED DIAPHRAGM PUMPS NDP05INDUSTRIAL PTFE PUMPS

AIR OPERATED DIAPHRAGM PUMPS DP10INDUSTRIAL PTFE PUMPS

. . . . . . . . .

. . . . . . . . . . . .

. . .


PORT SIZE: 3/8 , BSP Female thread, liquid in- and outlet1/4 , BSP Female thread,air inlet with ball valve

Material of air motor: Aluminium with epoxy coating (blue)


PTFE (Teflon) PTFE (Teflon) Ball/PTFE PTFE PTFEDP-10-BTT


. . . . . . . . .

. . . . . . . . . . . .

. . .





PTFE (Teflon) PTFE (Teflon) Ball/PTFE PTFE PTFENDP-10-BTT


. . . . . . . . .

. . . . . . . . . . . .

. . .





PTFE (Teflon) PTFE (Teflon) Flat/PTFE PTFE PTFENDP-15-FTT

AIR OPERATED DIAPHRAGM PUMPS NDP20 INDUSTRIAL PTFE PUMPS

. . . . . . . . .. . . . . . . . . . . .. . .


PORT SIZE: 3/4 , BSP Female thread, liquid in- and outlet 3/8 , BSP Female thread, air inlet with ball valveMaterial of air motor: Aluminium with epoxy coating (blue)

PP (NDP20BTTX)

MATERIALS: WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:NDP-20-BTT PTFE (Teflon) PTFE (Teflon) Ball/PTFE PTFE PTFENDP-20-BTTB PTFE (Teflon) PTFE (Teflon) Ball/PTFE PTFE PTFE (with flange)NDP-20-BTTX PTFE (Teflon) PTFE (Teflon) Ball/PTFE PTFE PTFE (PP air motor)

AIR OPERATED DIAPHRAGM PUMPS NDP25 INDUSTRIAL PTFE PUMPS

. . . . . . . . .. . . . . . . . . . . .. . .


PORT SIZE: 1, BSP Female thread, liquid in- and outlet 3/8, BSP Female thread, air inlet with ball valveMaterial of air motor: Aluminium with epoxy coating (blue)

PP (NDP-25-BTTX)

MATERIALS: WETTED PARTS DIAPHRAGM VALVE SEAT O-RINGType:NDP-25-BTT PTFE (Teflon) PTFE (Teflon) Ball/PTFE PTFE PTFENDP-25-BTTB PTFE (Teflon) PTFE (Teflon) Ball/PTFE PTFE PTFE (with flange)NDP-25-BTTX PTFE (Teflon) PTFE (Teflon) Ball/PTFE PTFE PTFE (PP air motor)

55 : 1 50 : 1

. . . . . . . . .. . . . . . . . . . . .. . .

AIR OPERATED PISTON PUMPS GREASE BARREL TYPE

ART.NO. PUMP SHANK OUTPUT AIR FLUID RATIO LENGHT (G/MIN) INLET INLET

852-498 55:1 430 mm 390 (NLGI#1) RC 1/4 RC 1/4852-499 55:1 510 mm 390 (NLGI#1) RC 1/4 RC 1/4852-500 55:1 725 mm 390 (NLGI#1) RC 1/4 RC 1/4852-762 55:1 950 mm 390 (NLGI#1) RC 1/4 RC 1/4851-728 50:1 427 mm 2300 (NLGI#1) G 1/4 with hose union851-783 50:1 870 mm 2300 (NLGI#1) G 1/4 with hose union

Grease bung lock adapter (not included): for 55 : 1 article 13-8003 and for 50 : 1 article 13-8035 or 12-0783 (see grease accessories).

(PpGrBa)

852-958 852-959 880-966 851-754 851-826

AIR OPERATED PISTON PUMPS OIL BARREL TYPE

. . . . . . . . .. . . . . . . . . . . .. . .

ART.NO. PUMP OUTPUT AIR CONSUMPTION AIR FLUID ACCESSORIESRATIO L/MIN L/MIN INLET OUTLET INCLUDED

852-958 1:1 52 230 RC 1/4 RC 3/4 803-488852-959 3:1 22,8 230 RC 1/4 RC 3/4 bung lock880-966 3:1 28 350 RC 1/4 RC 3/4 adapter851-754 5:1 18 400 G 1/4 RC 3/4851-826 15:1 5,6 400 G 1/4 G 1/4

PpOBar

852-960 852-961 880-967 851-753

. . . . . . . . .. . . . . . . . . . . .. . .

AIR OPERATED PISTON PUMPS OIL STUBBY TYPE

ART.NO. PUMP OUTPUT AIR CONSUMPTION AIR INLET FLUID RATIO L/Min. L/Min. OUTLET

852-960 1:1 52 230 RC 1/4 RC 3/4852-961 3:1 22,8 230 RC 1/4 RC 3/4880-967 3:1 28 350 RC 1/4 RC 3/4851-753 5:1 18 400 G 3/8 RC 3/4

Wall mounting brackets: article 800-400 (see oil accessories)

PpOStu

AIR OPERATED INDUSTRIAL PUMPS

. . . . . . . . .

. . . . . . . . . . . .

. . .

Art. No.Model SH-160A10 DR-160A10Pump Ratio 10 : 1 10 : 1Stroke (mm) 100.0 100.0Cycle/Liter 5.5 5.5Total Length (mm) 697 1362Pump Shank (mm) 270 935Material Outlet Port RC 3/4 RC 3/4Air Inlet Port G 3/8 G 3/8

850-097 850-160

850-097

850-160


. . . . . . . . .

. . . . . . . . . . . .

. . .

Art. No.Model SH-110C1.5 SH-110C2 SH-110C2 DR-110C2Pump Ratio 1.5 : 1 1.5 : 1 2 : 1 2 : 1Stroke (mm) 60.0 60.0 60.0 60.0Cycle/Liter 2.5 2.5 3.5 3.5Total Length (mm) 765 1177 765 1177Pump Shank (mm) 430 842 430 842Material Outlet Pot RC 3/4 RC 3/4 RC 3/4 RC 3/4Air Inlet Port G 1/4 G 1/4 G 1/4 G 1/4

851-854 851-856 851-855 851-857

851-854_855

851-856_857


. . . . . . . . .

. . . . . . . . . . . .

. . .

Art. No.Model SH-160C3 DR-160C3P SH-160C4Pump Ratio 3 : 1 3 : 1 4 : 1Stroke (mm) 100.0 100.0 100.0Cycle/Liter 1.5 1.5 2.1Total Length (mm) 865 1277 865Pump Shank (mm) 430 842 430Material Outlet Port RC 3/4 RC 3/4 RC 1/4Air Inlet Port G 3/8 G 3/8 G 3/8

850-154 850-156 850-155

850-154_155

850-156


. . . . . . . . .

. . . . . . . . . . . .

. . .

Art. No.Model SH-230C5P DR-230C5P SH-230C10P DR-230C10PPump Ratio 5 : 1 5 : 1 10 : 1 10 : 1Stroke (mm) 150.0 150.0 150.0 150.0Cycle/Liter 0.4 0.4 0.4 0.4Total Length (mm) 1281 1405 1271 1513Pump Shank (mm) 720 844 710 952Material Outlet Pot RC 1 1/2 RC 1 1/2 RC 1 1/2 RC 1 1/2Air Inlet Port RC 3/4 RC 3/4 RC 3/4 RC 3/4

850-180 850-181 850-182 850-183

850-181_183 850-180_182


. . . . . . . . .

. . . . . . . . . . . .

. . .

Art. No.Model SH-110B5 DR-110B5Pump Ratio 5 : 1 5 : 1Stroke (mm) 60.0 60.0Cycle/Liter 9.2 9.2Total Length (mm) 861 1180Pump Shank (mm) 541 860Material Outlet Port RC 3/4 RC 3/4Air Inlet Port G 1/4 G 1/4

851-830 851-131

851-830

851-831


. . . . . . . . .

. . . . . . . . . . . .

. . .

Art. No.Model SH-160B10 DR-160B10Pump Ratio 10 : 1 10 : 1Stroke (mm) 100.0 100.0Cycle/Liter 5.5 5.5Total Length (mm) 941 923Pump Shank (mm) 541 523Material Outlet Port RC 3/4 RC 3/4Air Inlet Port G 3/8 G 3/8

850-101 850-158

850-158 850-101


. . . . . . . . .

. . . . . . . . . . . .

. . .

Art. No.Model OPG-1SH SUS OPG-1DR SUSPump Ratio 1 : 1 1 : 1Stroke (mm) 89.0 89.0Cycle/Liter 6.0 6.0Total Length (mm) 640 1308Pump Shank (mm) 219 887Material Outlet Port RC 3/4 RC 3/4Air Inlet Port G 1/4 G 1/4

850-434 850-435

850-434

850-435


. . . . . . . . .

. . . . . . . . . . . .

. . .

Art. No.Model SH-110B1.5 SUS SH110B2 SUS DR-110B2 SUSPump Ratio 1.5 : 1 2 : 1 2 : 1Stroke (mm) 60.0 60.0 60.0Cycle/Liter 2.5 2.5 2.5Total Length (mm) 795 795 1177Pump Shank (mm) 455 455 842Material Outlet Port RC 3/4 RC 3/4 RC 1/4Air Inlet Port G 1/4 G 1/4 G 1/4

851-858 851-859 851-861

851-858_859

851-861


. . . . . . . . .

. . . . . . . . . . . .

. . .

Art. No.Model SH-110B5 SUS DR-110B5 SUSPump Ratio 5 : 1 5 : 1Stroke (mm) 60.0 60.0Cycle/Liter 9.2 9.2Total Length (mm) 858 1229Pump Shank (mm) 538 909Material Outlet Port RC 3/4 RC 3/4Air Inlet Port G 1/4 G 1/4

851-832 851-833

851-832

851-833


. . . . . . . . .

. . . . . . . . . . . .

. . .

Art. No.Model DR-160B3 SUS SH-160B3 SUS DR-160B4 SUS SH-160B4 SUSPump Ratio 3 : 1 3 : 1 4 : 1 4 : 1Stroke (mm) 100.0 100.0 100.0 100.0Cycle/Liter 1.5 1.5 2.1 2.1Total Length (mm) 1277 889 1277 889Pump Shank (mm) 842 454 842 454Material Outlet Pot RC 3/4 RC 3/4 RC 3/4 RC 3/4Air Inlet Port G 3/8 G 3/8 G 3/8 G 3/8

850-851 850-612 850-852 850-615

850-612_615

850-851_852


. . . . . . . . .

. . . . . . . . . . . .

. . .

Art. No.Model SH-160B10 SUS DR-160B10 SUSPump Ratio 10 : 1 10 : 1Stroke (mm) 100.0 100.0Cycle/Liter 5.4 5.4Total Length (mm) 941 1260Pump Shank (mm) 541 860Material Outlet Port RC 3/4 RC 3/4Air Inlet Port G 3/8 G 3/8

850-226 850-438

850-226

850-438


. . . . . . . . .

. . . . . . . . . . . .

. . .

Art. No.Model SR-160M20 ALS SR-160M35 ALS SR-160M50 ALSPump Unit No. 850-162 850-166 850-170Pump Ratio 20 : 1 35 : 1 50 : 1Stroke (mm) 100.0 100.0 100.0Cycle/Liter 14.6 24.0 35.7Total Length (mm) 811 811 811Pump Shank (mm) 455 455 455Suction Type Single Acting Single Acting Single ActingMaterial Outlet Port G 3/4 G 3/4 G 3/4Air Inlet Port G 3/8 G 3/8 G 3/8

880-833 880-834 880-835


. . . . . . . . .. . . . . . . . . . . .. . .

Art. No. 880-830 880-831 880-832Model SR-160M20ALW SR-160M35ALW SR-160M50ALWPump Unit No. 850-162 850-166 850-170Pump Ratio 20 : 1 35 : 1 50 : 1Stroke (mm) 100.0 100.0 100.0Cycle/Liter 14.6 24.0 35.7Total Length (mm) 811 811 811Pump Shank (mm) 455 455 455Suction Type Single Acting Single Acting Single ActingMaterial Outlet Port G 3/4 G 3/4 G 3/4Air Inlet Port G 3/8 G 3/8 G 3/8


. . . . . . . . .

. . . . . . . . . . . .

. . .

Art. No.Model SH-160M35 DAL SH-160M20 DAL SH-160M10 DAL SH-160M50 DALPump Unit No. 850-168 850-164 850-161 850-172Pump Ratio 35 : 1 20 : 1 10 : 1 50 : 1Stroke (mm) 100.0 100.0 100.0 100.0Cycle/Liter 24.0 14.6 6.0 35.7Total Length (mm) 1292 1292 1292 1292Pump Shank (mm) 936 936 936 936Suction Type Single Acting Single Acting Double Acting Single ActingMaterial Outlet Port G 3/4 G 3/4 G 3/4 G 3/4Air Inlet Port G 3/8 G 3/8 G 3/8 G 3/8

880-081 880-082 880-083 880-084


. . . . . . . . .. . . . . . . . . . . .. . .

Art. No. 880-362 880-363 880-365Model SR-230P40DWAL SR-230P60DWAL SR-230P20DWALPump Unit No. 852-096 852-097 852-095Pump Ratio 40 : 1 60 : 1 20:1Stroke (mm) 150.0 150.0 150.0Cycle/Liter 3.3 5.2 1.7Total Length (mm) 1,415 1,415 1,339Pump Shank (mm) 969 969 778Suction Type Doubl Acting Double Acting Double ActingMaterial Outlet Port G 1 G 1 Rc 1-1/2 Air Inlet Port G 3/4 G 3/4 G 3/4

Art. No. 880-243 880-244 880-245Model SR-230M20DWAL SR-230M40DWAL SR-230M60DWALPump Unit No. 850-185 850-186 850-187Pump Ratio 20 : 1 40 : 1 60 : 1Stroke (mm) 150.0 150.0 150.0Cycle/Liter 1.7 3.3 5.2Total Length (mm) 1,339 1,415 1,415Pump Shank (mm) 778 969 969Suction Type Double Acting Double Acting Double ActingMaterial Outlet Port Rc 1-1/2 G 1 G 1


. . . . . . . . .. . . . . . . . . . . .. . .

Art. No. 880-622Model SKR-110M50SALPump Unit No. 851-728Pump Ratio 50 : 1Stroke (mm) 60.0Cycle/Liter 110.0Total Length (mm) 765Pump Shank (mm) 427Suction Type Double Acting Material Outlet Port G 1/4Air Inlet Port G 1/4

AIR OPERATED INDUSTRIAL PUMPS INK SUPPLY

. . . . . . . . .. . . . . . . . . . . .. . .

Art. No. 880-931Model INK SPU 180P25 2001Pump Ratio 25 :1Stroke (mm) 100Cycle/Liter 5,35Lower pump capacity (mL) 186,75Total Length (mm) 2.254Foot print (mm) 982 x 641 Accessory (option) 803-771

Drum carrier

ELECTRICAL DRIVEN PUMPS

. . . . . . . . .. . . . . . . . . . . .. . .

852-216

880-639

Art. No.: 880-899 (EPL-100)Description: El. portable grease lubricatorOperational pressure: 0 - 24 MPaOutput capacity 80 - 120 gr./min.Container capacity 18 kg

Power source 200 W/1 - 3 AVoltage : 100 V/50 Hz,

Accessories included high pressure dispense valvefollower plateelectric wire 2,5 mhose 2,5 m 1/4"

Art. No.: 852-216Description: Battery type grease gun Operational pressure: 32 MPaOutput capacity: 1,6 gr./sec.Container capacity: original grease cartridge 400 gr.

Battery voltage: 9,6 V DCBattery charger: includedVoltage and current: 220VAC/7,2-9,6VDC - 1,9 ACharging time: approx. 1 hour

Art. No.: 880-639 (KPL-24)Description: El. portable grease lubricatorOperational pressure: 0 - 24 MPaOutput capacity: 80 - 120 gr./min.Container capacity: 18 kg.

Power source: 100 - 130 W/2 - 7,5 ABattery voltage: 24 V DC

Accessories included high pressure dispense valve follower plateelectric wire 5m

NDP20BP.pdfPagina 1

NDP20Bx.pdfPagina 1

NDP20BA.pdfPagina 1

NDP20BP.pdfPagina 1

NDP20BS.pdfPagina 1

NDP20BS.pdfPagina 1

NDP25Bx.pdfPagina 1

NDP25BA.pdfPagina 1

NDP25BF.pdfPagina 1

NDP25BP.pdfPagina 1

NDP25BS.pdfPagina 1

NDP25BV.pdfPagina 1

NDP40BA.pdfPagina 1

NDP40BF.pdfPagina 1

NDP40BP.pdfPagina 1

NDP40BS.pdfPagina 1

NDP50BA.pdfPagina 1

NDP50BF.pdfPagina 1

NDP50BP.pdfPagina 1

NDP50BS.pdfPagina 1

NDP80BA.pdfPagina 1

NDP80BF.pdfPagina 1

NDP80BP.pdfPagina 1

NDP80BS.pdfPagina 1

BDP20.pdfPagina 1

NDP25BA.pdfPagina 1

BDP25.pdfPagina 1

EDP-BP.pdfPagina 1

EDP-BS.pdfPagina 1

CDP20.pdfPagina 1

CDP25.pdfPagina 1

ECODP12.pdfPagina 1

DP05F.pdfPagina 1

DP10FPT.pdfPagina 1

DP10FPT.pdfPagina 1

DP10FFL.pdfPagina 1

DP20FRC.pdfPagina 1

DP20FFL.pdfPagina 1

DP25FFL.pdfPagina 1

DP38FFL.pdfPagina 1

DP10F.pdfPagina 1

DP20F.pdfPagina 1

NDP20BTT.pdfPagina 1

NDP25BTT.pdfPagina 1

PpGrBa.pdfPagina 1

PpOBar.pdfPagina 1

PpOStu.pdfPagina 1

AI880830.pdfPagina 1




EDpump.pdfPagina 1

CatalogueVoorblad Group I.pdfPagina 1

Yamada 1

Documents

Transcript of Yamada 1