Y Sidewinder X1 Spool Holder -Easy Roller · The end pins on the roller are simply pressed into the...
Transcript of Y Sidewinder X1 Spool Holder -Easy Roller · The end pins on the roller are simply pressed into the...
Summary
The stock spool holder that comes with the x1 isn't the greatest. For me itcaused just a bit too much resistance, pulling the extruder up ever soslightly and thus some layer variation.
So I made this with two options that can be easily swapped out on themain bracket.
3D Printers > 3D Printers - Upgrades
sidewinderx1 artillerysidewinder artilleryevnovo
Category: 3D Printer Accessories PrintSettings
Supports: No
Notes:
No supports needed. Parts should load in the correct printing orientation.
The end pins on the roller are simply pressed into the roller. You may wantto use a little glue. Bearings should be light friction fit.
J John S
Sidewinder X1Spool Holder -EasyRoller
VIEW IN BROWSER
updated 27. 11. 2019 | published 27. 11. 2019
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
444.2 KBupdated 27. 11. 2019
558.7 KBupdated 27. 11. 2019
999.8 KBupdated 27. 11. 2019
1.9 MBupdated 27. 11. 2019
1.2 MBupdated 27. 11. 2019
Find source .stl files on Thingiverse.com
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
large_display_rotating_holder_parts_12446.stl
large_display_spool_holder_main_bracket_12446.stl
spool_holder_main_bracket.stl
spool_holder_simple.stl
rotating_holder_parts.stl
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-NonCommercial
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition