SIDEWINDER™ Vise For 2nd Op Work Holding.Mounts To Any Kurt Industry Standard 6" Vise.

1 www.kurtworkholding.com | Toll Free Phone 1-877-226-7823 | Toll Free Fax 1-877-226-7828 | Phone 763-574-8309 | Fax 763-574-8313

Models: SDW25 SideWinder™

The Kurt SideWinder is a vise that mounts vertically to theback of any Kurt 6” vise with an integral bracket. Thebracket will include a stabilization leg that will mount to thetable on the movable end of the vise and a workstop toposition the height of the part.

Purpose:For doing 2nd op work holding the part vertically ratherthan horizontally.

Advantage:

• Saves set up time for 2nd op vertical work• Machining can be done on both vises in the same setup• Vise is at an elevated position which is more conducive

to longer reach machining• Has a stabilizer foot for vibration control• Can be mounted to any Kurt industry standard 6" vise• Has a round nut which controls deflection to a greater

degree• Does not interfere with the host vise• Pull type vise• AngLock design

Torque-Ft.Lbs.

ClampingForce-Lbs.

4 580

6 880

8 1120

10 1540

12 2450

Features:• Jaw Width: 2.500"• Jaw Height: 1.063"• Max Opening: 2.500"• Max Clamping Force: 2,450 Lbs.• Adjustment Range of Workstop:

0"- 4.313"• Hex Size: 0.375"• Overall Bracket Width: 14.000"• Hex Length: 0.453"• Weight: 19lbs• Patent Pending

PATENT PENDING

2www.kurtworkholding.com | Toll Free Phone 1-877-226-7823 | Toll Free Fax 1-877-226-7828 | Phone 763-574-8309 | Fax 763-574-8313

SIDEWINDER™

3.875

.940

0.0 / 2.50STROKE

14.45

8. / 8.31

2.88 / 3.19

1.75 2.19

6.00

3.2

3/8 DRIVE HEX

PRECISION SURFACE FORLOCATION REPEATABLILITY.

MACHINE TABLE/BOTTOM OF VISE

LOCATING PIN FOR FASTER SETUP'S

ADJUSTABLE SUPPORT FOOT.

ADJUSTABLE PART STOP5.0" OF ADJUSTMENT.

3/8 DRIVE HEX

1.06 JAW HEIGHT

2.500JAW

WIDTH

3.000SLOT

WIDTH

.531

13.750

.45

1.5

1/2-13 SHCS

ADJUSTABLE PART STOP5.0" OF ADJUSTMENT.

ADJUSTABLE SUPPORT FOOT.

1.063

Kurt™ Manufacturing Industrial Products Division9445 E. River Road NWMinneapolis, MN 55433Tel: (763) 574-8309Fax: (763) 574-8313Toll Free (US Only): 1 (877) 226-7823Toll Free Fax (US Only): 1 (877) 226-7828email address: workholding@kurt.comwebsite address: www.kurtworkholding.com

Printed in USA © Copyright. All rights reservedLIT.FLY.SDW25.0912.01

Kurt, AngLock, ArmLock, CarvLock, ClusterTower, D688, DLU4, DL430,DoubleLock, Groove Lock, InnerLock, Versatile Lock, SeraLock, CT430,CTU4 are registered trademarks of Kurt Manufacturing.

PowerLock, ToolBlox and SideWinder are trademarks of Kurt Manufacturing.

Distributor

On standard Kurt Workholding productsImproving Productivity Worldwide

An EmployeeOwned Company

KURT PH 763.574.8309 email workholding@kurt.com www.kurtworkholding.com

Find more of what you're looking for atwww.kurtworkholding.com

Find more of what you're looking for atwww.kurtworkholding.com