XT SPRINT 2004 - Algeos

2
Thin, durable and modern material for top quality custom foot orthotics. 5 carbon grades for ultimate design control. Easy to mould and finish, requiring no special handling. Sleek, modern designs for great looking orthotics. High performance - yet economical. PERFORMANCE Composite structure for thinness and high strength. Unique resin formulated for high resistance to cracking, impact and fatigue. No creep, relaxing or bottoming out. Superior recoil and spring characteristics. Blank sizing allows for deep heel cups and directional rigidity for greater foot control. PRODUCT SELECTION XT EASE FLEX Ultra thin for comfort and gentle support. XT SEMI FLEX Very thin, extra degree of comfort and control. XT SEMI RIGID Thin & light - provides strong support with spring back. XT RIGID Rigid support - withstands heavy use without cracking. XT ULTRA RIGID Meets special needs for extreme activities and weight. 'Silverdot' Carbon-Glass Blanks High on performance, economical on price Ice Silverdot

Transcript of XT SPRINT 2004 - Algeos

Thin, durable and modern material for top quality custom foot orthotics.

5 carbon grades for ultimate design control.

Easy to mould and finish, requiring no special handling.

Sleek, modern designs for great looking orthotics.

High performance - yet economical.

PERFORMANCEComposite structure for thinness and high strength.

Unique resin formulated for high resistance to cracking, impact and fatigue.

No creep, relaxing or bottoming out.

Superior recoil and spring characteristics.

Blank sizing allows for deep heel cups and directional rigidity for greater foot control.

PRODUCT SELECTIONXT EASE FLEXUltra thin for comfort and gentle support.

XT SEMI FLEX Very thin, extra degree of comfort and control.

XT SEMI RIGID Thin & light - provides strong support with spring back.

XT RIGID Rigid support - withstands heavy use without cracking.

XT ULTRA RIGID Meets special needs for extreme activities and weight.

'Silverdot'

Carbon-Glass BlanksHigh on performance, economical on price

Ice

Silverdot

GRADE EASE FLEX SEMI FLEX SEMI RIGID RIGID ULTRA RIGID

MINUTES 3 3 1/2 4 4 1/2 5

FABRICATIONEASY TO MOLD - ALLOWS DEEP HEEL CUPS - CAN BE REHEATED ANDREMOULDED - INDEFINITE SHELF LIFE - NO SPECIAL STORAGECONDITIONS - EASY TO MACHINE AND FINISH - POST ADJUSTMENTSWITH HEAT GUN

EQUIPMENT REQUIRED: Oven, Vacuum former, Mould cast, Release liner (Teflon), Gloves

Set the panel on release liner and place in oven at 200ºC (400ºF) for 3-5minutes. (see Time Grid)

Place the softened panel on mold.

Promptly apply vacuum and close the rubber membrane.

For deep arches, massage out any wrinkles by hand.

After about 1 minute, remove molded insert and trim.

NOTES:

If wrinkles persist, place Poron sheet between panel and mold. XT blankscan be reheated and molded up to three times.

SMALL MEDIUM LARGE

INCHES 3.5 x 7.5 4.0 x 8.0 5.0 x 9.0

CM 9 x 19 10 x 20 12.7 x 22.8

PROPERTY UNITS EASE FLEX SEMI FLEX SEMI RIGID RIGID ULTRA RIGID

THICKNESS mm 1.6 1.8 2.0 2.6 3.0

WEIGHT 10X20 CM G 40 45 50 70 80

FLEXURAL MODULUS GPA 2.8 3.0 3.0 3.1 2.8

FATIGUE RESISTANCE 106 cycles >1 >1 >1 >1 >1

RIGIDITY Nm2 1 1.8 2.8 4.3 6.5

BLANK SIZES

HEATING TIME GRID

TYPICAL BLANK PROPERTIES

BLANK SIZE EASE FLEX SEMI FLEX SEMI RIGID RIGID ULTRA RIGID

Large (5 x 9”) TA2242 TA2243 TA2244 TA2245 TA2246

Medium (4 x 8”) TA2214 TA2215 TA2216 TA2217 TA2218

Small (3.5 x 7.5”) TA2208 TA2209 TA2210 TA2211 TA2212

CODE SIZES & PRICES - SILVER DOT PATTERN

BLANK SIZE EASE FLEX SEMI FLEX SEMI RIGID RIGID ULTRA RIGID

Large (5 x 9”) TA2142 TA2143 TA2144 TA2145 TA2146

Medium (4 x 8”) TA2114 TA2115 TA2116 TA2117 TA2118

Small (3.5 x 7.5”) TA2108 TA2109 TA2110 TA2111 TA2112

CODE SIZES & PRICES - ICE PATTERN