X50-25 SERIES - QA Tech
2
50c | QA Technology Company, Inc. | www.qatech.com | All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm/newtons]. © 2020 QA Technology Company, Inc. Ø.046 [1.17] 90° Ø.038 [0.97] 90° Ø.046 [1.17] 90° 45° (3) .012 [0.30] B.C. Ø.046 [1.17] Ø.046 [1.17] 45° (3) .023 [0.58] B.C. X50-25 SERIES .050 [1.27] Centers | .250 [6.35] Full Stroke Ø.0402 [1.021] 1.410 [35.81] 1.110 [28.19] .250 [6.35] Full Stroke .109 [2.77] (ref) Ø.027 [0.67] ID .167 [4.24] Working Stroke Ø.0266 [0.676] (max)² X50-PRP2540S 1.243 [31.57] at Test Position S PROBE P/N X50-PRP25 - example: X50-PRP2584X-S Tube Letter Material/Finish Average Resistance Current Rating 1 MW @ 120°C SS @ 204°C P Nickel silver/ID precious metal clad < 35 mOhms 5.6 Amps 7.8 Amps Tip Style Digits Material/Finish See Tips Standard material is heat treated BeCu/plated gold over nickel. (see S option for steel plungers) Spring Letter Spring Force Preload @ .167 [4.24] Stroke Material Cycle Life @ .167 [4.24] Stroke L Low 1.5 [43g/0.42N] 3.1 [88g/0.86N] MW 1,000,000 S Standard 2.7 [77g/0.75N] 5.5 [156g/1.53N] MW 1,000,000 H High 2.7 [77g/0.75N] 7.0 [198g/1.95N] SS 1,000,000 Y Elevated 3.1 [88g/0.86N] 8.0 [227g/2.22N] MW 250,000 X Extra 2.7 [77g/0.75N] 10.1 [286g/2.81N] MW 100,000 High Preload Spring – Only available with headless steel tip styles. E High Preload 5.0 [142g/1.39N] 8.0 [227g/2.22N] SS 300,000 F High Preload 6.0 [170g/1.67N] 10.0 [283g/2.78N] SS 300,000 Option Letter Description N No probe lubrication. Removing probe lubrication greatly reduces cycle life and should only be used in applications requiring operating temperatures below -55°C. S Heat treated steel/plated gold over nickel (see tip style for availability) (Blank) No option required 1 Current Rating is affected by spring material and lubrication choices. Standard lubrication has a 120˚C maximum operating temperature limit. Use SS springs with no lubrication (-N) for testing beyond standard lubrication temperature limits up to 204°C. Before using probes near these current limits, please refer to Current Carrying Capacity and Operating Temperature Application Notes. 2 Maximum plunger OD should be used to calculate minimum guide plate clearance holes. 60° 150° Ø.026 [0.66] 20° 40° Ø.026 [0.66] 45° Ø.026 [0.66] 90° 6R Razor 8R Razor 9R Razor CHISEL SERRATED STAR 63 or 63 Chisel 43 or 43 Chisel 53 or 53 Chisel Ø.026 [0.66] 15°(3) .054 [1.37] 25° (3) Ø.026 [0.66] 45° (3) Ø.026 [0.66] Ø.046 [1.17] 45° (3) Ø.038 [0.97] 45° (3) 13 Chisel 03 or 03 Chisel .060 [1.52] Min. Centers Ø.046 [1.17] Ø.026 [0.66] BLADE 51 Blade .060 [1.52] Min. Centers 71 Blade TRIAD FLAT 18 or 18 Chisel Triad .060 [1.52] Min. Centers 38 Chisel Triad .060 [1.52] Min. Centers Ø.026 [0.66] 46 Flat Star 76 Center Point Star 06 Star .060 [1.52] Min. Centers Ø.046 [1.17] 16 Flat Star .060 [1.52] Min. Centers 26 Center Point Star .060 [1.52] Min. Centers 08 or 08 Triad .060 [1.52] Min. Centers .025 [0.64] B.C. Ø.045 [1.14] Ø.046 [1.17] 09 or 09 Serrated .060 [1.52] Min. Centers Ø.038 [0.97] 39 Serrated Ø.026 [0.66] 49 Serrated Ø.038 [0.97] 59 Micro Serrated Ø.026 [0.66] 79 Micro Serrated 10 Flat .060 [1.52] Min. Centers Ø.046 [1.17] 0.050 1.27 0.000 0.00 0.100 2.54 0.150 3.81 0.200 5.08 0.250 6.35 12 14 10 6 8 4 2 227 283 340 170 57 S L H E F Y X STROKE (mm) STROKE (in) FORCE (oz) FORCE (gm) .167 [4.24] Stroke SPRING FORCE Ø.026 [0.66] 90° 61 Blade Ø.026 [0.66] 20 Flat RAZOR Actual Size
Transcript of X50-25 SERIES - QA Tech
50c | QA Technology Company, Inc. | www.qatech.com | All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm/newtons]. © 2020 QA Technology Company, Inc.
Ø.046[1.17]
90°
Ø.038[0.97]
90°
Ø.046[1.17]
90°
45°(3)
.012 [0.30]B.C.
Ø.046[1.17]
Ø.046[1.17]
45°(3)
.023 [0.58]B.C.
X50-25 SERIES .050 [1.27] Centers | .250 [6.35] Full Stroke
Ø.0402[1.021]1.410
[35.81]
1.110[28.19]
.250 [6.35]
Full Stroke
.109 [2.77](ref)
Ø.027 [0.67] ID
.167 [4.24]
WorkingStroke
Ø.0266 [0.676] (max)²
X5
0-P
RP
25
40
S
1.243[31.57]at Test Position
S
PROBE P/N X50-PRP25 - example: X50-PRP2584X-S
Tube Letter Material/Finish Average
ResistanceCurrent Rating1
MW @ 120°C SS @ 204°CP Nickel silver/ID precious metal clad < 35 mOhms 5.6 Amps 7.8 Amps
Tip
Styl
e Digits Material/Finish
See Tips Standard material is heat treated BeCu/plated gold over nickel. (see S option for steel plungers)
Sprin
g
Letter Spring Force Preload @ .167 [4.24] Stroke Material Cycle Life @ .167 [4.24] Stroke
L Low 1.5 [43g/0.42N] 3.1 [88g/0.86N] MW 1,000,000
S Standard 2.7 [77g/0.75N] 5.5 [156g/1.53N] MW 1,000,000
H High 2.7 [77g/0.75N] 7.0 [198g/1.95N] SS 1,000,000
Y Elevated 3.1 [88g/0.86N] 8.0 [227g/2.22N] MW 250,000
X Extra 2.7 [77g/0.75N] 10.1 [286g/2.81N] MW 100,000
High Preload Spring – Only available with headless steel tip styles.
E High Preload 5.0 [142g/1.39N] 8.0 [227g/2.22N] SS 300,000
F High Preload 6.0 [170g/1.67N] 10.0 [283g/2.78N] SS 300,000
Optio
n
Letter Description
N No probe lubrication. Removing probe lubrication greatly reduces cycle life and should only be used in applications requiring operating temperatures below -55°C.
S Heat treated steel/plated gold over nickel (see tip style for availability)(Blank) No option required
1 Current Rating is affected by spring material and lubrication choices. Standard lubrication has a 120˚C maximum operating temperature limit. Use SS springs with no lubrication (-N) for testing beyond standard lubrication temperature limits up to 204°C. Before using probes near these current limits, please refer to Current Carrying Capacity and Operating Temperature Application Notes.
2 Maximum plunger OD should be used to calculate minimum guide plate clearance holes.
60° 150°
Ø.026[0.66]
20°40°
Ø.026[0.66]
45°
Ø.026[0.66]
90°
6R Razor 8R Razor 9R Razor
CHISEL
SERRATED
STAR
63 or 63 Chisel 43 or 43 Chisel53 or 53 Chisel
Ø.026[0.66]
15°(3)
.054[1.37]
25°(3)
Ø.026[0.66]
45°(3) Ø.026
[0.66]Ø.046[1.17]
45°(3)
Ø.038[0.97]
45°(3)
13 Chisel 03 or 03 Chisel.060 [1.52] Min. Centers
Ø.046[1.17]Ø.026
[0.66]
BLADE
51 Blade.060 [1.52] Min. Centers
71 Blade
TRIAD FLAT
18 or 18 Chisel Triad.060 [1.52] Min. Centers
38 Chisel Triad .060 [1.52] Min. Centers
Ø.026[0.66]
46 Flat Star 76 Center Point Star 06 Star.060 [1.52] Min. Centers
Ø.046[1.17]
16 Flat Star.060 [1.52] Min. Centers
26 Center Point Star.060 [1.52] Min. Centers
08 or 08 Triad.060 [1.52] Min. Centers
.025 [0.64]B.C.
Ø.045[1.14]
Ø.046[1.17]
09 or 09 Serrated.060 [1.52] Min. Centers
Ø.038[0.97]
39 Serrated
Ø.026[0.66]
49 Serrated
Ø.038[0.97]
59 Micro Serrated
Ø.026[0.66]
79 Micro Serrated
10 Flat.060 [1.52] Min. Centers
Ø.046[1.17]
0.050
1.27
0.000
0.00
0.100
2.54
0.150
3.81
0.200
5.08
0.250
6.35
12
14
10
6
8
4
2
227
283
340
170
57
S
L
HE
F
Y
X
STROKE (mm)
STROKE (in)
FORC
E (o
z)
FORC
E (g
m)
.167 [4.24] Stroke
SPRING FORCE
Ø.026[0.66]
90°
61 Blade
Ø.026[0.66]
20 Flat
RAZOR
Actual Size
| www.qatech.com | QA Technology Company, Inc. | 51 All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm/newtons]. © 2020 QA Technology Company, Inc.
P/N: WJ - example: WJ28C8230
Wire
Colors Available for 28C & 30C Termination
0 Black 2 Red 4 Yellow 6 Blue 8 Gray1 Brown 3 Orange 5 Green 7 Violet 9 White
Wire Length Available for 28C & 30C Termination
Specify Length in inches: 03 – 72 [76-1828]
Size
Digit Description
2830 Wire Jack only (customer to crimp wire) brass/gold plated with nylon insulator.28C8 28 AWG Kynar insulated solid wire, pre-attached, specify color and length.30C3 30 AWG Kynar insulated solid wire, pre-attached, specify color and length.
Optio
n Letter Description
S Stripped Length 0.000/.669 [0.00/16.99]; Customer to specify in inches
Ø.046[1.17]
90°90°
Ø.038[0.97]
Ø.026[0.66]
R.013 [0.32]
.683
[17.
35]
.209
[5.3
1]
.125
[3.1
8] (t
yp)
X50-
TC-1
G-
Ø.0
25
[0.6
4] (t
yp)
.160
[4.0
5]
“A”
.245
[6.2
2] (t
yp)
.160
[4.0
6] (t
yp)
X50-
TJ-
G
X50-
TW-
G .715
[18.
16]
.138
[3.5
1]
X50-
TR-2
G
X50-
TG-3
G-
Ø.0
41 [1
.03]
(typ
-2)
.105
[2.6
7] (t
yp)
1.01
5 [2
5.78
].1
50 [3
.81]
Ø.0
24 [0
.61]
Ø.0
16 [0
.41]
.500
[12.
70]
�.0
16 [0
.41]
.623
[15.
82]
.149
[3.7
8]
Ø.0
22
[0.5
6] (t
yp)
XTDS
-0
8
Ø.0
36
[0.9
1] (t
yp)
.100
[2.5
4]
XTDS
-1
4
.683
[17.
35]
.209
[5.3
1].1
60 [4
.05]
.150
[3.8
1]fu
ll st
roke
(typ
)
Ø.0
25 [0
.64]
ID (t
yp)
Ø.0
16 [0
.40]
ID (t
yp)
Ø.0
37
[0.9
4] (t
yp)
.623
[15.
82]
.149
[3.7
8].1
00 [2
.54]
X50-
TC-0
G-
03-7
2 [7
6-18
28]
Wire
Len
gth
“A”
“A”
TOOLS & ACCESSORIESSee pages 66-69 for order information.
Ø.020[0.51]
Ø.026[0.66]
Ø.026[0.66]
Ø.018[0.46]
CUP
32 Cup 22 Cup.060 [1.52] Min. Centers
.007 [0.18]
Ø.046[1.17]
TORCHØ.021[0.53]
Ø.026[0.66]
.005 [0.13]
Ø.046[1.17]
.007 [0.18]
Ø.046[1.17]
CROWN
Ø.026[0.66]
Ø.012[0.30]
Ø.030[0.75]
Ø.046[1.17]
Ø.026[0.66]
Ø.042[1.07]
.038 [0.97]B.C.
55 or 55 Crown.060 [1.52] Min. Centers
N4 Crown
Ø.032[0.80]
24 or 24 Crown.060 [1.52] Min. Centers
Ø.040[1.01]
Ø.046[1.17]
58 Crown.060 [1.52] Min. Centers
Ø.046[1.17]
INSULATOR ROUND
99 Insulator.075 [1.91] Min. Centers
40 Round
Ø.020[0.51]
Ø.026[0.66]
P/N: WG50Description/Material
To accept 28AWG or 30AWG Kynar solid insulated wire, stripped at .120 [3.05], (not included) Nylon sleeve, white
.300 [7.62]
Ø.045 [1.14]
WG50WG50
WIRE GRIP SLEEVE For use with G termination pins.
.338 [8.59]
Ø.037 [0.94]
03-72[76-1828]
WJ2830 WJ C
.133[3.38]
.338 [8.59]
Ø.037 [0.94]
03-72[76-1828]
WJ2830 WJ C
.133[3.38]
WIRE JACK For use with J termination pins.
SPEAR
41 or 41 Spear
01 Spear
Ø.026[0.66]
25°
90°
Ø.046[1.17]
10°
Ø.026[0.66]
31 Spear
47 Torch 07 Torch.060 [1.52] Min. Centers
05 Torch.060 [1.52] Min. Centers
17 Torch.060 [1.52] Min. Centers
X50-
25 S
ERIE
S
TERMINATION PIN See page 53 for order information.Suggested mounting holes and drill sizes in AT7000, G10/FR4 or similar materials should be gauged in probe plate at .0415 / .0430 [1.054 / 1.092]; Drill Size #57 or 1.1mm and back plate at .0380 / .0390 [0.965 / 0.990]; Drill Size #61 or 1.0mm
Ø.070[1.78]
Ø.054 [1.37]
.013 [0.33]1.313 [33.35]OAL
84 Crown54 Crown 74 CrownG4 Crown 34 or 34 Crown.060 [1.52] Min. Centers
44 or 44 Crown
