“Bringing the Future to Light”

Presented By:

Green-Energy-Products. Com, LLCEco-friendly, energy efficient lighting solutions… think green

Toll Free: 800-639.8796

www.green-energy-products.com

Agenda

1. Company Overview

2. Product Overview. What is “RealTime Lighting”?

3. Typical Lamp life and Maintenance

4. Benefits of RealTime Lighting

5. Popular Applications

6. Case studies

What is “RealTime Lighting”? Essentially a fluorescent lamp without electrodes or

filaments. Rings w ith magnetic coils create an electro

magnetic field using a high frequency generated by the electronic ballast.

Electrons discharged by the magnetic coils collide with mercury atoms inside the glass tube and become activated.

These electrons give off energy in the form of invisible UV light.

The conversion to visible light occurs when it passes through a phosphor coating on the inside surface of the tube.

The lamp therefore relies on the fundamental principles of gas discharge and electromagnetic “induction” to produce light.

As a result the lamp offers an unmatched life span. They can last longer

than 100 incandescent bulbs, 5 HID, or 5 typical fluorescent lamp changes.

Eco-friendly, energy efficient, lighting solutions…think green

Product Overview

S/P RatioDefinition: The S/P ratio determines the apparent visual brightness of a light source and determines how much light a lamp produces which is useful to the human eye (i.e. Visually Effective Lumens/Lux).

Measurement: The S/P ratio of a light source is determined by measuring the output in Lumens or Lux using a light meter or spectrometer calibrated first to the Photopic vision sensitivity curve, and then measuring the same light with instruments calibrated to the Scotopic vision sensitivity curve. The resulting numbers form a ratio that is expressed as a single number.

S/P RATIOSun + Sky: 2.476500k RealTime Lamp: 2.255000k RealTime Lamp: 1.964100k RealTime Lamp: 1.62Metal Halide (Na/Sc): 1.49High Pressure Sodium(50w): 1.14Incandescent (2850k): 1.41Warm White Fluorescent: 1.00

(Credit: Francis Rubenstein of Berkley Labs)

S/P Ratio in ActionTypical Lamp Application (1 to 1 comparison):120 W Low pressure Sodium lamp [SOX 120] X 140 Lumens/W8 =

16,800 Lumens X 0.35(S/P Ratio) = 5,880 lumens of light useful to human vision.

120 W RealTime lamp X 80 Lumens/W = 10,200 Lumens X 1.96(S/P Ratio) =18,816 lumens of light useful to human vision

Typical Lamp Application (50% energy reduction):400W Metal Halide lamp [M 400] X 54.6 Lumens/W8 = 21,840 Lumens X

1.497 = 32,541 useful lumens200W RealTime lamp X 81 Lumens/W = 16,200 Lumens X 1.96 = 31,752

useful lumens

NOTE: The calculations above do not take into account actual electrical energy consumption which wouldinclude losses in the ballasts and would make the RealTime induction lamp even more efficient.

Eco-friendly, energy efficient, lighting solutions…think green

CRI (Color Rendering Index)CRI:The best possible rendering of colors is specified by a CRI of 100.

RealTime Induction lamps come in a wide range of color temperatures, between 3500K – 6500K, with 90+ CRI.

This high CRI makes objects look bright, clear and naturalunder the RealTime induction lamp

Eco-friendly, energy efficient, lighting solutions…think green

250 Watt High Pressure Sodium 120 Watt RealTime Lamp

A Picture is Worth a Thousand Words

Eco-friendly, energy efficient, lighting solutions…think green

Typical Lamp Life

TYPICAL LAMP LIFEIncandescent Bulbs: 750-1,000 hours, 0.22 Years

Halogen Bulbs: 2,000-3,000 hours, 0.68 Years

Metal Halide: 7,500-10,000 hours, 2.2 Years

Fluorescent: 15,000-20,000 hours, 4.6 Years

Mercury Vapor: 16,000-24,000 hours, 5.4 Years

High Pressure Sodium: 15,000-24,000 hours, 5.4. Years

RealTime Lighting: 80,000-100,000 hours, 22.8 Years

Eco-friendly, energy efficient, lighting solutions…think green

**based on 12 hours per day 7 days per week**

Lumen Maintenance

RealTime Induction Lamps

2007 RTG lighting

Features of RealTime’s Lamp & Ballast

• 100,000 hour life time • 5 year warranty• No electrodes & no filaments• Wide range of colour temperatures (3500K – 6500K)• Wide range of wattages• Instant on and Instant re-strike capabilities• Wide operating temperatures (-40F to +122F)• 90+ CRI • .92 power factor• 100% flicker free / no hum• 98% efficient – 2% ballast overhead loss• 80 – 92 lumens per watt• Lumen maintenance of 80% at 90% of rated life span• 120 volt – 277volt – 347 volt ballasts

Eco-friendly, energy efficient, lighting solutions…think green

Eco-Friendly ‘RealTime Lighting’

Positive Environmental Impact:

Our Lamps offer a LEED qualifying “Green” lighting product that eliminates toxic waste disposal costs with 100% recyclable mercury.

Aids the environment with a product that promotes a reduction in overall greenhouse gas emissions. Less demand for power on local utilities reduces electrical power generation

Dramatically reduces the contribution of hazardous waste to landfill sites by the elimination of spent lamps and ballasts

Eliminate the high levels of mercury currently being added to the environment by disposed lamps

RealTime lamps contain solid amalgam mercury which is 100% recyclable. This makes the RealTime induction lamp a completely ‘green lighting’ productNOTE:

Lamps such as Metal Halide, Fluorescent & High Pressure Sodium all contain substances (i.e. mercury) that are damaging to the environment

Benefits of RealTime Induction Lighting

Energy, Maintenance & Productivity Savings:

Cost Savings: Immediately reduce electric consumption (typical electric savings range between 40-70%)

Maintenance Savings: Practically maintenance free. 100,000 hour/5-year warranty on bulb and ballast eliminates the cost of constant maintenance and re-lamping

HVAC Savings: Ballasts are 98% efficient – no heat generated. HVAC cost reduction.

Increased Safety and Security – instant on and re-strike – no flicker-no hum

Increases worker productivity with ‘spectrally enhanced’/full spectrum lighting

Eco-friendly, energy efficient, lighting solutions…think green

Popular “Green” Lighting from Green-Energy-Products.Com, LLC

Flood Light(Billboards/Buildings)

Garage Lighting(Parking Garages, Train Stations…)

Wallpacks(outside of buildings)

Sealed Industrial(Tunnels/Bridges/Highways)

Surface Mount(Schools/Parking Garages…)

Roadway Lighting

Self Ballasted (screw in bulb)Office LightingShoe Box Lighting

(Parking Lots/Walkways…)

High Bay Lighting Earth embedded(landscape)

Decorative (Parks, Plazas, shopping malls)

Down Lighting

Retrofit

RealTime Electronic Ballast RealTime Lamp

Many customers choose to keep their existing fixtures by “retrofitting” the fixture with the RealTime Lamp

& Ballast

Town on Long Island, N.Y. Goes Green…with “induction lighting”

As part of a 12-point 2008 Clean Energy Action Plan:- phasing-in induction lighting in its 30,000 streetlights-Town Energy Committee -electricity reduction program-adopting a number of in-house procedures to lower energy

--------------------------------------------------------------------------------------“We have no higher obligation than to protect our environment, reduce our carbon footprint, and leave the Town in the best shape we know how for future generations,"

-Statement from Councilman

Town Expects to Save Nearly $1 million in 2008

Eco-friendly, energy efficient, lighting solutions…think green

CASE STUDIES

CASE STUDY

Manufacturer of Fire & Emergency Vehicles Changes to Induction Lighting

Application:* previously had 400W Metal Halide fixtures. * Installed 200W induction lights which replaced the old Metal Halide Fixtures.

Testimonial“We are extremely pleased with our new lights. Our production staff which includes welders, fabricators and mechanics see much better than before, resulting in improved quality and higher productivity. In addition we saved over 50% on our lighting energy costs and the 10 year warranty has eliminated the costly lamp and ballast replacements we had before. I highly recommend induction lighting to other companies.”

-President

CASE STUDY

Hospital Application:

Application 1:Radiology Office: Replaced 14 x 40w T-5 Fluorescent with 4 x 40w Magnetic Induction lamps & ballasts. Reduced energy consumption from 560w to 160w

Application 2:Maintenance Dept. & Laundry Room: Replacing fixtures that contain 2 x 32w fluorescent bulbs with 1 x 40w induction lamp. Decreasing energy consumption on an average of 35%

Application 3:Parking Garages: Replacing various wattages of Metal Halides, HPS & fluorescents with half the wattage in induction lamps. Projected 10-year savings over $970,000

Testimonial:“These lights look like the sun…”

-Facilities Manager at the hospital

SummaryKey Benefits of RealTime Lighting

Environmentally Friendly: contains solid amalgam mercury which is 100% recyclable. Eliminates the high levels of mercury being added to the environment by disposed lamps.

Energy Savings: Reduces your lighting energy consumption by 35% - 70%.

Reduced Carbon Footprint: There is a direct link between CO2 and global warming. By using our energy saving lamps you directly reduce your organization’s carbon footprint.

Maintenance Free: Practically maintenance free, our bulb & ballasts are engineered to last for 100,000 hours (11.4 years running continuously). This eliminates the maintenance costs associated with constantly re-lamping.

Eco-friendly, energy efficient, lighting solutions…think green

Green-Energy-Products.Com, LLCEco-friendly, energy efficient lighting solutions … think green

13055 SW 83rd AvenuePinecrest, FL 33136Toll Free: 800-639.8796E-mail: info@green-energy-products.comWeb: www.green-energy-products.comattn: Mr. John NovarFax: 786.242.8929