ww.sculelemn.eu ET FREZE IMBINARI REGLABIL 0040 1 file1 TECHNICAL SPECIFICATIONS The two cutters are...
1
1 TECHNICAL SPECIFICATIONS The two cutters are adjustable by distance rings included. For joint depth: 8 mm Hc (brazed tungsten carbide) execution for abrasive, hard, soft and glued woods, MDF, plywood. APPLICATION MOULDER, SPINDLE MOULDER 0040 www.sculelemn.eu SET FREZE IMBINARI REGLABIL ADJUSTABLE JOINT CUTTERS Z=4/4 / Hc 001 Cod. D 140 15-:75 8 8 S A P A = adancime de profilare in mm. - joint depth in mm. P = pasul imbinarii in mm. - joint pitch in mm. D = diametru in mm. - diameter in mm. S = grosime lemn in mm. - thickness of wood in mm. Z = numerde dinti- number of cutting edges D S P A d 40 65 1.5 fig.5 8 36° 8 55 32 1.5 8 fig.4 8 36° 1.5 fig.1 15 8 8 36° 36° 16 30 8 fig.2 1.5 8 45 1.5 8 24 fig.3 36° 8 48 75 1.5 fig.6 8 36° 8
Transcript of ww.sculelemn.eu ET FREZE IMBINARI REGLABIL 0040 1 file1 TECHNICAL SPECIFICATIONS The two cutters are...
1
TECHNICAL SPECIFICATIONS
The two cutters are adjustable bydistance rings included.For joint depth: 8 mmHc (brazed tungsten carbide) executionfor abrasive, hard,soft and glued woods, MDF, plywood.
APPLICATIONMOULDER, SPINDLE MOULDER
0040www.sculelemn.eu SET FREZE IMBINARI REGLABIL
ADJUSTABLE JOINT CUTTERS
Z=4/4 / Hc
001
Cod. D
140 15-:75 8 8
S A P
A = adancime de profilare in mm. - joint depth in mm. P = pasul imbinarii in mm. - joint pitch in mm.
D = diametru in mm. - diameter in mm. S = grosime lemn in mm. - thickness of wood in mm.
Z = numerde dinti- number of cutt ing edges
D
S P
A
d
4065
1.5
fig.5
8
36°
8
55 32
1.5
8
fig.4
8
36°1.5
fig.1
15
8
8
36°
36°1630
8
fig.2
1.5
8
451.5
8
24
fig.3
36°
8
4875
1.5
fig.6
8
36°
8