WritingBot is a robot that can write word or name on paper as fixing pen to robot. Learn Variable Chip and IF Else Chip to do movements like pull up or put down pen as using only one button of Remocon then apply to robot. Write your name greatly with program using Variable Chip.

WritingWriting

A-1

1. Connect Middle Frames and Small 8 Frame and make body of robot. Fix DC Motors to Middle Frames then insert Wheels to DC Motor axles.

AssemblingAssembling

A-2 A-3

2. Beware on order of overlapping Middle Frames then assemble as referring to the picture taken from different angle.

AssemblingAssembling

B-1

3. Fix various Supports to body of robot then connect CPU Board and Servo Motor.

AssemblingAssembling

B-2 B-3

4. Assemble as referring to the picture taken from different angle.A) Beware of direction and assembling position of Servo Motor axle.

AssemblingAssembling

C-1

5. Fix Middle Frames to Battery Case then connect 25mm Supports and L-type 2x1 Frames to Middle Frames.

AssemblingAssembling

C-2 C-3

6. Assemble as referring to the picture taken from different angle.

AssemblingAssembling

D-1

7. Connect Small 4 Frames and 7mm Supports to Battery Case and fix pen then use various supports and Nylon Nuts to fix Motor Guide.

AssemblingAssembling

D-2 D-3

8. Assemble as referring to the picture taken from different angle.

AssemblingAssembling

E-1

9. Insert 140mm axles to Middle Frame then use Controllable Nuts to fix. Insert L-type Frame that is fixed to Battery Case to 140mm axles, connect Remocon Receiving Board and DC Motor Drive Board to CPU Board.

AssemblingAssembling

E-2 E-3

10. Assemble as referring to the picture taken from different angle.

AssemblingAssembling

F-1 F-2

AssemblingAssembling

G-1 G-2

AssemblingAssembling

H-1 H-2

AssemblingAssembling

Starting Point Set up Position Radius of Rotation

Setting servo motorSetting servo motor