Fixing Material - ESELO

Fixing Materialfor the profesional

TypeLoad Range (kg)

Description Pages –50 50–200 200–

P60

846

Wall Plug, TP ● ❍ ❍ Universal plug for various fixing tasks.

P

6084

5 Clips Plug, TCP ●For fixing clips in base materials that are too hard for the nail to penetrate or too soft for safe grip.

P

6084

7

Nail Plug, TPS ● ❍The new concept in through fixing. Safe grip in all masonry materials.

P77

796

Universal Fixing QUICKI, TPN ●Two dimensions. Suitable for mounting in most building materials.

P60

837

Steel Cavity Fixing PLATTI, TPP ● ❍

Fire proof with flip-over bar for heavy loads. Re-mains safely in the board even with screw removed. Sizes M4 and M5 cover all board thicknesses.

P

6081

8Cavity Fixing DUO-MAX, TSP ●

Cavity fixing for all kinds and thicknesses of board. Remains safely in the board even with the screw removed.

P60

824

Cavity Fixing MONO-MAX, TMM ●

Cavity fixing for light objects using a woodscrew. Remains safely in the board even with the screw removed.

P

6081

6

Cavity Fixing DRIVA, TPD ●For fixing in plasterboard. Self drilling and installed without pilot drilling.

P

6083

8

Cavity Fixing, TMX ● ❍

Fire proof cavity fixing with flip-over bar for heavy loads. Remains safely in the board even with the screw removed.

P

7779

9

Universal Anchor SEVENHOOK, SVH ● ❍For suspension of electric armature in ceilings etc. Corrosion proof, acid resistant.

P77

797

Low Density Anchor, TLF ● ●Through fixing for low density building materials. Also suitable as anchor with woodscrew.

P79

623

Wedge Steel Anchor, TSA ● ● ●Flush mounted fixing with internal M-thread for solid masonry materials.

P79

624

Brass Anchor, TMA ● ●Corrosion proof flush fixing expanded by M-thread-ed screw. Suits all masonry materials.

Concrete

Stone/Rock

Solid Bric

ks

and Block

s

Hollow Bric

ks

and Build

ing Blocks

Board

Materia

lsLow Den

sity

Materia

ls (A

LC)

Fixing Guide

✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔

✔

✔

✔

✔

✔

✔ ✔

✔

✔ ✔

✔ ✔

TypeLoad Range (kg)

Description Pages –50 50–200 200–

P60

846

Wall Plug, TP ● ❍ ❍ Universal plug for various fixing tasks.

P

6084

5 Clips Plug, TCP ●For fixing clips in base materials that are too hard for the nail to penetrate or too soft for safe grip.

P

6084

7

Nail Plug, TPS ● ❍The new concept in through fixing. Safe grip in all masonry materials.

P77

796

Universal Fixing QUICKI, TPN ●Two dimensions. Suitable for mounting in most building materials.

P60

837

Steel Cavity Fixing PLATTI, TPP ● ❍

Fire proof with flip-over bar for heavy loads. Re-mains safely in the board even with screw removed. Sizes M4 and M5 cover all board thicknesses.

P

6081

8

Cavity Fixing DUO-MAX, TSP ●

Cavity fixing for all kinds and thicknesses of board. Remains safely in the board even with the screw removed.

P60

824

Cavity Fixing MONO-MAX, TMM ●

Cavity fixing for light objects using a woodscrew. Remains safely in the board even with the screw removed.

P

6081

6

Cavity Fixing DRIVA, TPD ●For fixing in plasterboard. Self drilling and installed without pilot drilling.

P

6083

8

Cavity Fixing, TMX ● ❍

Fire proof cavity fixing with flip-over bar for heavy loads. Remains safely in the board even with the screw removed.

P

7779

9

Universal Anchor SEVENHOOK, SVH ● ❍For suspension of electric armature in ceilings etc. Corrosion proof, acid resistant.

P77

797

Low Density Anchor, TLF ● ●Through fixing for low density building materials. Also suitable as anchor with woodscrew.

P79

623

Wedge Steel Anchor, TSA ● ● ●Flush mounted fixing with internal M-thread for solid masonry materials.

P79

624

Brass Anchor, TMA ● ●Corrosion proof flush fixing expanded by M-thread-ed screw. Suits all masonry materials.

● Very suitable ❍ Suitable

Metric UnitsMetric Units have been used throughout this handbook and all Thorsman fixingsare made to Metric Standard.Recommended loads for the fixings should strictly speaking be listed inNewtons or Kilo Newtons (N or kN), as they are forces. But fixing calcula-tions generally, start from the weight of the fixture. For simplicity, we havechosen to give all loads in N or kN and suggests that the appropriate con-version of 1 kN = approximately 100 kg should be used.

Recommended LoadMethods of testing fixings vary between different manufacturers, whichmakes it difficult to compare test results.Our tests are performed in conjunction with internationally recognized test-ing institutes as well as tough tests on site.The test results presented in this book include a safety factor. Therefore,our recommended loads are sometimes lower than those of other manu-facturers. The loads recommended by Thorsman are not to be comparedto ultimate loads which are otherwise frequently used. Recommendedloads are safe, ultimate loads indicate failure point.For you, this means that the recommended load we give can be used incomplete safety.

Calculate the LoadIf you have only pull-out load, or shear load, you can easily determine theload per fixing point. But make allowance for any load which might beadded later and for any uneven distribution of the load over the fixingpoints.Often pull-out load appears together with shear load. Wall mountedshelves are one example. The pull-out load increases with the distancefrom the wall. In most cases it is sufficient to add an extra margin but beaware of the substantial pull-out load created in bracket fixings with highloads placed far out from the wall.

Choose the Fixing to suit the Base MaterialStudy the load recommendations given for the base material which com-pares best to your particular one.

ConcreteIn-situ concrete normally has a strength of 25 N/mm2 (called C25) or bet-ter. Precast structural components have considerably higher strength(C40–60).

Stone and RockThe same recommendations as for concrete can be used, but check forcracks.

Hollow Bricks and Building BlocksHollow building blocks are normally of a low compressive strength (5 N/mm2 or higher).Due to the relatively low strength of these building materials, there is alimit for the size of the expansion fixings which can be used without crack-ing the brick or block. That is why load recommendations for some fixingsare only given for the smaller sizes.

Solid Bricks and BlocksFixing in brick or block walls is one of the most common fixing situations.The strength of the wall depends on several factors which have to be con-sidered.• Individual strength of the Blocks or bricks• Strength of mortar joints• Workmanship in brick or block laying• Support of the wallFixing of light fixtures to a brick or block wall presents few problems. Try toavoid mortar joints.With increasing weight and larger fixings keep well away from mortar jointsand make sure that the bricks or blocks are not cracking. As a general rulea larger quantity of smaller fixings is safer than a few larger fixings.Fixing of heavy fixtures to a brick or block wall is not recommended unlessthe wall has been designed for that purpose.

Terminology

Fixture

Fixing

Base Material

Drill Depth incl. Fixture

Types of load

Shear load

Pull-Out load

B

B

A

A

High Pull-Out load whenA is greater than B.

Low Pull-Out load whenA is less than B.

Fixing Techniques

M10

960

M10

960

M10

970

M10

970

M10

980

Board materialsThe Thorsman cavity fixings are specialized fixings for plaster board/gyp-sum board, plywood, particle board, chipboard, sheetmetal and otherboard types where only one side of the material is accessible.Board materials vary in quality between countries and therefore it is diffi-cult to compare test results.Thorsman has chosen to test all its cavity fixings in well-definedScandinavian plasterboard (13 and 2x13 mm) as being the most commonboard material.We recommend only loads up to 80 kg to be fixed directly in board materi-als. Heavier loads must be fixed in the structural elements.

Through FixingNail plugs and Anchors are all through fixings.They can be inserted through the hole in the fixture and into the basematerial while the fixture is still in position. This is a great advantage inmany situations. To fix an electricial consumer unit with hammer fixings isas easy as this:Find the position of the first fixing point and drill the hole in the wall. Holdthe unit in position and hammer in the first fixing. With the unit still in posi-tion, drill through the remaining screw holes of the unit and into the wall forthe other fixings. Then hammer them in. No measuring or marking, theholes always line up.

Minimum Edge Distance and Internal SpacingDistance between the fixing point and nearest edge of the base materialshould exceed 5–10 times the hole diameter.Internal spacing between the fixing points should exceed 10–20 times thehole diameter.In cases where these rules are not applicable, the specific information isgiven in the technical data for the fixing.

CorrosionAll Steel Fixings must have a protection against corrosion in order to staysafe over a long time.Electroplated Steel is a common material with a glossy surface. It is suit-able for indoor and protected outdoor use.Hot Dip Galvanized Steel is a better protection even if the surface looksgrey and dull. It can be used even in unprotected outdoor applications andalso as a structural component.Acid Proof Stainless Steel is the most durable material and quite expen-sive. It is sometimes the only alternative in highly corrosive environmentswithin certain industries.

Excessive heatFixings made of plastic material are not suitable in environments with tem-peratures above 85 °C (185 °F).

Fire proof fixingsAlways consider the consequences of a fire. Do not use fixings made ofplastic for heavier fixtures in ceilings and on walls along fire escape routes.

A = 5 to 10 times thehole diameter.(Example: Hole diameter= 10 mm. A = 50 to 100mm.)

B = 10 to 20 times thehole diameter.

M10

760

Weight

Kg lb

6 137 158 189 20

10 22

12 2614 3116 3518 4020 44

25 5530 6635 7740 8845 99

50 11060 13270 15480 17690 198

100 220110 243120 265130 287140 306

150 330200 440250 550300 660350 770

400 880450 990500 1100600 1325700 1545

800 1765900 1985

1000 22051100 24251200 2645

Drill diametersApproximate conversion

mm inch

4 5/325 3/165.5 7/326 1/48 5/16

10 3/811 7/1612 15/3213 1/214 9/16

15 19/3216 5/820 3/422 7/825 1

28 1 1/832 1 1/435 1 3/438 1 1/2

TorqueNNmm llbb//iinncchh

8.5 7410 8520 17525 21530 260

40 35050 43065 560

150 1325250 2200

Lengthmm to inch: mm × 0.0349inch to mm: inch × 25.40

Unit Conversions

Plugs Wall PlugTP

Drill the hole in accordance with the table andinstall the plug. In plasterboard – make a holeusing a drill or an awl. The hole should be apress fit for the plug. Use TP 1 yellow for a single sheet and TP 2 red for double sheets.

Fix with a screw long enough to penetratethrough the whole length of the plug and fixture.

The mounting is ready and the screw has expanded the plug in the correct way.

M10

160

M10

490

M10

500

P10

01

Basic Data

Suitable forConcrete, stone, lightweight concrete, expandedclay, hollow blocks, hollow bricks, solid bricksand plasterboard.

Applications For most installation work in which shear forcesdominate. Where pull-out forces dominate orwhere high temperatures are generated, as atlight fittings against ceilings, for instance, one ofour metal fixings is recommended.

Advantages• Double expanding• High load values• Easy to install• Recognisable Colour Code System™• Self centering design for screw• Varying temperature range.

MaterialPE (polyethylene HD).

Temperature Range - 50 to + 80 °C.

PackagingColour coded boxes, cardboard carton.

Technical data(1 kN = 100 kg)

Type Drill diameter Min. drill Wood screw Recommended load1)

in mm depth/Min. Ø mm using largest screwscrewing Shear/pull-out

Concrete ALC in depth,+ brick Concrete mm Concrete Solid Low density concrete

(strength brick (500 grade) and25 N/mm) kN expanded claykN kN

P60

846

Wall PlugTP

Plugs

Range Type Colour Qty/Pack Art. No.

TP 0 White 100 1000 009TP 1 Yellow 100 1001 007 TP 2 Red 100 1003 003TP 2B Brown 100 1005 008TP 3 Blue 100 1006 006TP 10 Blue 100 1006 014TP 4 Green 100 1007 004TP 12 Green 100 1007 012TP 14 Grey 50 1008 002TP 16 Orange 50 1009 000TP 20 Black 20 1010 008

TP 0 White 500 1000 017TP 1 Yellow 500 1001 023TP 2 Red 250 1003 011TP 2B Brown 100 1005 016

TP 5×25 Yellow 100 1001 025500 1001 031

TP 6×30 Red 100 1003 020250 1003 029

TP 8×45 Brown 100 1005 032

On sprue of ten

Single plugs

TP 0 5.5 – 20 3.5–5 0.4/0.15 0.3/0.15 –TP 1 5.5 5 25 3.5–5 0.5/0.25 0.4/0.2 0.1/0.04TP 5×25 5 5 25 3.5–5 0.5/0.25 0.4/0.2 0.1/0.04TP 2 5.5 5 40 3.5–5 0.6/0.4 0.5/0.3 0.15/0.05TP 6×30 6 6 35 3.5–5 0.6/0.4 0.5/0.3 0.2/0.08TP 2B 8 7 45 5–6 1.2/0.8 0.7/0.4 0.25/0.1TP 8×45 8 7 45 5–6 1.2/0.8 0.7/0.4 0.25/0.1TP 3 10 9 50 5–7 1.4/1.0 – 0.3/0.15TP 10 10 9 50 5–7 1.4/1.0 – 0.3/0.15TP 4 12 10 65 8–10 3.0/2.0 – 0.5/0.25TP 12 12 10 65 8–10 3.0/2.0 – 0.5/0.25TP 14 14 – 78 10–12 4.0/2.5 – –TP 16 16 – 88 12 5.0/3.0 – –TP 20 20 – 108 16 6.0/4.5 – –

1) Safety factor for shear 4.5 and for pull-out, 6.

P60

846

Plugs Nail PlugTPS

Drill through the fixture straight into the basematerial. Use drill size in accordance with thetable.

Clean the hole and install the plug.

Hammer home.

Easy to remove: Unscrew the screw-nail.

M10

030

M10

050

M10

060

P10

02

Basic Data

Suitable forConcrete, stone, low density concrete, expandedclay, hollow blocks, hollow bricks, solid bricksand plasterboard.

ApplicationsFor all types of through installation, such aselectrical trunking, switches, battens, clampsand door and window frames.

Advantages• Hammer-in fixing• Fast installation• Powerful expansion – large load values• Complete range for electrical and building

work• Through fixing

MaterialPlug in PA (polyamide), scres nail in steel.

Temperature Range– 40 to + 80 °C.

AccessoriesCaps available to cover the nail head.

PackagingCardboard caton.

M10

040

P60

847

Nail PlugTPS

Plugs

Range Type Colour Qty/Pack Art. No.Drill Ø/Max.fixture thicknessPlug length mm

TPS-4/5×25 Clear 100 1149 301TPS-4/15×35 Clear 100 1149 350

TPS-5/5×35 Clear 100 1149 608TPS-5/5×35 Black 100 1149 616TPS-5/5×35 Brown 100 1149 624TPS-5/20×50 Clear 100 1149 707TPS-5/20×50 Black 100 1149 715

TPS-6/5×35 Clear 100 1150 002TPS-6/5×35 Black 100 1150 010TPS-6/20×50 Clear 100 1150 051TPS-6/45×75 Clear 100 1150 101

TPS-8/15×50 Clear 50 1150 150TPS-8/40×75 Clear 50 1150 200TPS-8/65×100 Clear 50 1150 259TPS-8/85×120 Clear 50 1150 281

TPS-10/20×75 Clear 50 1150 309TPS-10/60×115 Clear 50 1150 358

TPS-H5 White 100 1150 903TPS-H6 White 100 1150 929TPS-H8 White 100 1150 945TPS-H10 White 50 1150 960

Nailplug


Type Plug Screw- Min. drill Max Recommended loadDrill Ø max. Ø mm nail depth thickness Shear/pull-out1)

fixture thick- Ø mm incl. of fixtureness x plug fixture mm Concrete Solid brick Low density concretelength mm K 25 kN (500 grade) andmm kN expanded clay

kN

TPS-4/5×25 4 2.5 30 5 0.15/0.05 0.15/0.05 –TPS-4/15×35 4 2.5 40 15 0.15/0.05 0.15/0.05 –

TPS-5/5×35 5 3 42 5 0.3/0.1 0.3/0.1 –TPS-5/20×50 5 3 57 20 0.3/0.1 0.3/0.1 –

TPS-6/5×35 6 3.5 42 5 0.4/0.2 0.4/0.2 0.1/0.07TPS-6/20×50 6 3.5 57 20 0.4/0.2 0.4/0.2 0.1/0.07TPS-6/45×75 6 3.5 82 45 0.4/0.2 0.4/0.2 0.1/0.07

TPS-8/15×50 8 4 62 15 0.65/0.3 0.5/0.25 0.2/0.13TPS-8/40×75 8 4 87 40 0.65/0.3 0.5/0.25 0.2/0.13TPS-8/65×100 8 4 112 65 0.65/0.3 0.5/0.25 0.2/0.13TPS-8/85×120 8 4 132 85 0.65/0.3 0.5/0.25 0.2/0.13

TPS-10/20×75 10 7 90 20 1.7/1.4 1.7/0.7 0.7/0.4TPS-10/60×115 10 7 130 60 1.7/1.4 1.7/0.7 0.7/0.4


Cap

TCP-0 White 100 5.5 20 1.2–2 1140 003TCP-1 Yellow 100 5.5 25 1.2–3 1141 001

Plugs Clip PlugTCP

P60

845

In light weight concrete, simply hammer in theclip plug. If the surface is plastered, filled orpainted – make the start of a hole first.

In concrete, brick and other hard materials drillfirst.

In single plasterboard sheets, make a holewith an awl. In double plasterboard sheets, itis sufficient to start a hole.

P76

887

P76

886

P76

883

P10

03

Basic Data

Suitable forConcrete, stone, low density concrete, expandedclay, solid brick and plasterboard.

ApplicationsFor attaching TC clips and nails.

Advantages• Permits nailing of clips in masonry

materials• Established colour code – easy to select

correctly

MaterialImpact-resistant PS (polystyrene).

Temperature range– 40 to +70 °C.

PackagingCardboard carton.

Range/Technical data

Type Colour Qty/ Drill Min. drill Nail Art. No.Pack Ø mm depth Ø mm Ø mm

Plugs Universal fixingQUICKI™, TPN

P77

796

P13

78

P13

79

Suitable forConcrete, natural stone, low density concrete500 (not in porous low density concrete 400-450), expanded clay, hollow blocks and brick,solid brick and and plasterboard.

ApplicationsTPN can be used for most situations whereshear loads predominate.

Advantages• Universal fixing which gives great expan-

sion and a secure fixing in all building materials

• Pack contains both fixing and screw• Fully-treaded screw supplied – even thin

objects can be fixed• Two sizes cover all situations• 25 fixings in each box – just right for the

pocket

MaterialsFixing of modified PA (polyamide, nylon) andscrew of hardened bright galvanised steel withfull double thread. Colour: silver.

Temperature range–20 to +80 °C.



TPN-6×35 Silver 25 1051 007TPN-8×50 Silver 25 1052 004

Technical data(100 N = 10 kg)

Type Screw Drill Max Min Board Recommended load1): Shear/pull-outØ××L size Ø mm thickness drill thicknessmm ØxL of object depth mm Concrete Low density Plaster- Plaster-

mm mm mm K 25 concrete 500 board boardN and expanded 13 mm 2××13=26 mm

N N N

TPN-6×35 4×50 6 16 50 min. 9 500/100 200/60 180/60 260/80TPN-8×50 5×60 8 12 60 min. 3 600/150 250/80 200/60 350/140


Cavity Fixings Cavity fixingPLATTI™, TPP

Drill a hole in accordance with the table. Attachthe toggle in the guide collar and install.

Push screw until spring-loaded bar flips over.

Remove the screw. Mount the fixture.

M10

300

M10

310

P10

09

Basic Data

Suitable forMounting in boards. Suitable even for ceilingmounting due to large captive toggle.

ApplicationsFor installation in 10 to 35 mm plasterboards.

Advantages• Fireproof• Captive fixing – even without screw• High load values• Wide range of board thicknesses• No tool required• Large metal toggle, withstands humidity, heat

and heavy loads• Simple to remove – cut off spring• Two variants – with screw or hook

MaterialToggle and collar – zincScrew and hook – electroplated steel Spring – steel


Dimensions of hook for TPP-10×M4K:

L641

50

M10

320

Cavity Fixings Cavity fixingPLATTI™, TPP

P60

837

Technical data (1 kN = 100 kg)

Type Screw Drill Sheet thickness Max thickness Practical loading capacityØ mm size Ø mm mm of fixture for Shear/pull-out1)

×× thread sheet thickness kN

13 mm 2x13 mm 13 mm 2××13 mmplaster- plaster-board board

TPP-10×M4S M4×55 10 10–30 37 mm 24 mm 0.40/0.16 0.60/0.22TPP-10×M4K M4×50 10 10–26 – – – /0.16 – /0.22TPP-13×M5S M5×65 13 10–35 47 mm 34 mm 0.50/0.17 0.80/0.34

1) Includes a safety factor of 2.5 for shear and 3 for pull-out.

P80

837


TPP-10×M4S – 25 1200 005TPP-13×M5S – 25 1200 401

TPP-10×M4K – 25 1200 203

Cavity fixing with screw

Cavity fixing with hook

Cavity Fixings Cavity fixingDUO-MAX™, TSP

Basic Data

Suitable forPlasterboard.

ApplicationsFor installation in 3-35 mm plasterboard.

Advantages• Captive fixing• High load values• Wide range of board thicknesses• No tool required• Corrosion resistant• Established colour code system• Two variants – with screw or hook

MaterialCollar, spring and expanding part – Nylon (PA)Screw and hook – electroplated steel Type M with screw of nickel-plated brass

Temperature Range- 40 to + 80 °C.

PackagingCardboard carton. Drill a hole in accordance with the table. Push in

DUO-MAX with the aid of the screw.

Remove screw.

Mount the fixture.

M10

330

M10

340

P10

10

Dimensions for TSP-10 K Hook:

L100

50

Dimensions for TSP-6 K Hook:

L101

00

M10

350

Cavity Fixings Cavity fixingDUO-MAX™, TSP

TSP-6/50 M3×50 6 3–26 20 mm 7 mm 0.18/0.07 0.24/0.09TSP-6/50 M M3×50 6 3–26 20 mm 7 mm 0.18/0.07 0.24/0.09

TSP-10/50 M5×50 10 3–20 12 mm – 0.25/0.075 –TPS-10/65 M5×65 10 3–35 25 mm 12 mm 0.25/0.075 0.40/0.15TSP-10/75 M5×75 10 3–40 37 mm 24 mm 0.25/0.075 0.40/0.15TSP-10/75 M M5×75 10 3–38 34 mm 21 mm 0.25/0.075 0.40/0.15

TSP-6 K M3×40 6 3–20 – – 0.18/0.07 –TSP-10 K M5×60 10 3–28 – – 0.25/0.075 0.40/0.15

1) Includes a safety factor of 4.5 for shear and 6 for pull-out load.

P80

835

Range Type Colour Dimension Qty/Pack Art. No.Ø/Length A/Bmm mm

TSP-6/50 Red/white 52/11 25 1240 001TSP-6/50 M1) Red/white 52/11 25 1240 050

TSP-10/50 Blue/white 54/20 25 1244 003TPS-10/65 Blue/white 68/20 25 1248 004TSP-10/75 Blue/white 77/20 25 1249 002TSP-10/75 M1) Blue/white 77/20 25 1250 000

TSP-6 K Red/white 60/11 25 1241 009TSP-10 K Blue/white 93/20 25 1253 004

1) Type M in stainless material for instance for wet rooms.

Cavity fixing with screw

Cavity fixing with hook

P60

818

P80

836


Type Screw Drill Sheet thickness Max thickness Practical loading capacityØ mm size Ø mm mm of fixture for Shear/pull-out11))

×× thread sheet thickness kN

13 mm 2x13 mm 13 mm 2××13 mmplaster- plaster-board board

Cavity Fixings Cavity fixingMono-Max, TMM

P60

824

Drill Ø 8 mm hole and use the screw to installthe MONO-MAX.

Remove screw.

Mount the fixture and insert screw.

M10

770

M10

780

P10

11

Basic Data

Suitable forPlasterboard.

ApplicationsFor lightweight mounting in 3 to 26 mm plaster-board.

Advantages• Supplied with or without screw in the pack• Requires only 15 mm of cavity space behind

the plasterboard• Requires only a small drillhole – 8 mm• Captive without screw• No tools required

MaterialPA (nylon).

Temperature Range– 40 to + 80 °C.


M10

790


Type Wood Drill Sheet thickness Max thickness Practical loading capacitymm screw Ø mm mm of fixture for Shear/pull-out1)

size sheet thickness kN

13 mm 2××13 mm 13 mm plasterboard

TMM-8x26 – 8 3–26 Decided by screw length 0.20/0.06TMM-8x26 8x13/4 8 3–26 19 mm 6 mm 0.20/0.06TMM-8x13 8x11/2 8 3–13 19 mm 6 mm 0.20/0.06TMM-8x13 8x11/2 8 3–13 19 mm 6 mm 0.20/0.06

1) Includes a safety factor of 4.5 for shear and 6 for pull-out load.


TMM-8x261) White 100 1206 028TMM-8x262) White 25 1206 131TMM-8x132) White 25 1206 124TMM-8x133) White 25 1206 155

1) Without screw2) With panhead screw3) With countersunk screw

Cavity Fixings Cavity fixingTMX

Drill a hole in accordance with the table andinstall the TMX.

Expand the TMX using a screwdriver or the TMXtool.

Remove the screw and mount the fixture. Insertscrew and tighten.

M10

400

M10

410

M10

430

P10

13

Basic Data

Suitable forBoards up to 44 mm thick.

ApplicationsVarious types of board, like plaster, plywood andparticle boards, but also for board materials likeplastic, sheet metal and laminate.

Advantages• Anti-rotation design• Wide range of board thicknesses• Captive fixing• Fire resistant• High load values.

MaterialElectroplated steel.

AccessoriesMounting tool for expanding the TMX. (Smallmounting jobs can be done using a screwdriver.)


TMX 4M 100 M4 8 1–6 30 – 1260 009TMX 4E 100 M4 8 5–15 40 0.20/0.14 1260 025TMX 4D 50 M4 8 16–26 50 0.40/0.16 1260 066TMX 4T 50 M4 8 34–44 70 – 1260 082TMX 5E 50 M5 10 3–16 57 0.40/0.16 1260 108TMX 5D 50 M5 10 12–32 70 0.60/0.20 1260 124TMX 6E 50 M6 12 3–16 57 0.45/0.18 1260 140TMX 6D 50 M6 12 12–32 70 0.70/0.28 1260 165

TMX-T 1 1265 040

1) Safety factor 2.5 for shear and 3 for pull-out load.

M10

420

Fixing

Mounting tool

Range/Technical data(1 kN = 100 kg)

Type Qty/Pack Screw Drill Sheet Screw Max. load1) Article No.Ø mm thickness length Shear/

Min-max mm /pull-outmm kN

P60

838

P80

838

TPD-SK 100 4.5×35 9– 12 0.27/0.81) 1220 106TPD-SK 25 4.5×35 9– 12 0.27/0.81) 1220 205

TPD-VS 100 4.5×35 9– 12 0.19/0.52) 1220 010

1) Safety factor for shear 2.5 and for pull-out, 3.2) Safety factor for shear 4.5 and for pull-out, 6.

Cavity Fixings Cavity fixingDriva, TPD

Screw the TPD into the plasterboard using apozi screwdriver.

Mount the fixture by screwing the screw intothe TPD using a screwdriver.

M10

800

M10

810

P60

816

P80

834

P81

303

P10

14

Basic Data

Suitable forPlasterboard sheets.

ApplicationsFor light installation in plasterboard. Sheets 9mm thick and above. Installation independent ofplasterboard thickness and insulation behind.

Advantages• Self-drilling, installed and fixed with hand

or power screwdriver Pozidriv (PZ) 2 with-out pilot drilling

• Driva TPD-SK is supplied with 4.5×35 screw with low profile head

• Driva TPD-VS is supplied with 4.5×35 screw with round head

• Works with plasterboard 9 mm thick and above, including multiple sheet thicknesses

• Fire-resistant• Steep-pitch screw: fast, easy to turn.

MaterialDriva TPD-SK – Zinc; the screw is electro-galvanised.Driva TPD-VS – Glass-fibrereinforced PA(polyamide).


Range/Technical data(1 kN = 100 kg)

Type Qty/Pack Screw Sheet Max. Max. load Article No.size thickness thickness Shear/pull-outmm mm of fixture in 13 mm plasterboard

mm kN

Anchors Low density anchorTLF

Insert the TLF throughthe fixture and hammer itin without predrilling(grades 400 and 450)using the hammer tool.

Swing back the spaceron hammer tool.

Expand the TLF by ham-mering in the tool.

M10

010

P10

15

Basic Data

Suitable forAerated concrete, expanded clay.

ApplicationsFor medium heavy fixing into aerated low density concrete.

Advantages• Close to edge installation• Installed without pre-drilling in 400-450 grade

low density concrete• Long expansion part and powerful expansion

– very high load values• Quickly installed – hammer it in and expand it

using a hammer tool• Fire resistant

MaterialHot dipped galvanised steel, Fe/Zn 45.

AccessoriesHammer tool, sleeve, adaptor and bracket.


TLF-8x65 50 1601 012TLF-12x100 25 1601 020TLF-12x145 25 1601 038TLF-16x130 10 1601 079

TLF-S8x65 1* 1601 194TLF-S12x100 1 1601 202TLF-S12x145 1 1601 236TLF-S16x130 1 1601 277

TLF-H12 25 1601 319

TLF-F12 25 1601 350

TLF-A12 10 1601 384

*Supplied with anchor

Anchors Low density anchorTLF

P77

797

P81

285

P80

845

P80

844

P80

843


Type Min base Thickness Min hole in Recommended load1) in low density concreteØ x Length thickness of fixture fixture for Shear/pull-out loadmm mm mm through

installation grade 400 grade 450 grade 5002)

Ø mm kN kN kN

TLF-8x65 100 0–10 8.5 0.1/0.2 0.2/0.3 0.3/0.6TLF-12x100 150 0–15 12.5 0.23)/0.6 0.34)/0.6 0.6/0.8TLF-12x145 150–200 0–60 12.5 0.2/0.6 0.3/0.8 0.6/1.0TLF-16x130 200 0–20 17 0.6/1.1 1.7/1.3 1.5/2.4

1) Safety factor against shear 2.5 and against pull-out 3.2) Predrilling is recommended in low density concrete of grade group 500 and harder and expanded clay (Leca). Drill Ø 8 mm for TLF-8x65, Ø 12 mm for TLF-12

and Ø 16 mm for TLF 16x130. The load values for low density concrete 500 applies to these materials.3) 0.5 kN with sleeve 12.4) 0.6 kN with sleeve 12.

Low-density anchor

Hammer tool

Sleeve

Bracket

Adapter

Range Type Qty/Pack Art. No.

Anchors Universal anchorSevenhook™, SVH

Drill hole as per table. Drive in SEVENHOOKusing the setting tool to get the right depth.Done! The short, stiff wire ends efficiently gripthe sides of the hole, giving a strong, secure fixing.Temporary installation of cables, hoses, etc: Drillslightly deeper (about 50 mm) and when the jobis finished, drive the SEVENHOOK into the hole.

M13

350

M13

360

P12

55

Basic Data

Suitable forConcrete, natural stone, solid brick, sheet metal.

ApplicationsFor fittings close to the ceiling (with locking tab),and to suspend false ceilings fittings, pipeworkand ventilation equipment.

Advantages• Never age, i.e. no material fatigue• Fire-classified and vibration resistant• Corrosion-resistant• Simple, secure fitting – grips immediately

after driving in• Minimal drilling depth – 30 mm

MaterialAcid-resistant wire. SS2343 grade.

AccessoriesSetting tool – for correct setting depth (suppliedin the pack). Locking tab – for installing fittingsclose to ceiling. Cap (supplied in pack E) – cov-ers hole. Self-locking strip 11 × 0.7 mm.

PackagingCardboard carton. Every pack contains a settingtool. Pack E also contains caps. Clear instruc-tions.

M13

370

M13

380

M13

390

M13

400

With hanger. With self-locking special stripTGB/TRB-11×0.7 mm. Capblanks hole.

With wire. Cap blanks hole. Installation close to ceiling,with locking tab.

Anchors Universal anchorSevenhook™, SVH

Range/Technical data (1 kN = 100 kg)

Type Qty/pack Drill Opening for Smallest Practical load capacity4) Art. No.size wire, tie, drilling andØ mm hanger insertion Concrete Solid

Ø mm depth K25 brick mm kN kN

SVH-E1) 1001) 8 6.5 30 1.0 0.5 2800 282SVH-G2) 5002) 8 6.5 30 1.0 0.5 2800 316

SVH-L 25 – – – 3) 3) 2800 380

SVH-T 10 – – – – – 2800 332

1) The pack also contains 100 white caps to blank the drilled hole and one setting tool.2) The pack also contains one setting tool.3) For installing fittings close to the ceiling (max 4 kg per fixing for good contact with the ceiling). For heavier fittings, the locking

tab can be turned horizontally to counter downward bending (clearance).4) Pull-out safety factor 3.

Anchor

Locking tab

Setting tool

P77

799

P81

301

P81

302

Anchors Wedge steel anchorTSA

P79

623

P80

863

Drill a hole in accor-dance with the table.Clean the hole andinstall the wedge anchor.

Use the TSAT Tool tohammer the wedge tothe bottom of the hole.Screw on the fixturesecurely using an M-threaded bolt.

M11

010

P10

23

Basic Data

Suitable forConcrete, stone, solid brick, block.

ApplicationsWherever you need a fixing point flush with thesurface in either ceiling, wall or floor surfaces.

Advantages• Captive fixing• No projecting parts• Shallow installation depth• Withstands aggressive environments• High load values• Fire proof

MaterialElectroplated plus yellow chromium plated steel.

AccessoriesTool for expanding the anchor (TSAT).



Type Ø/min Thread Inside Min distance Min c/c distance Max recommendedInside hole diameter thread to edge mm load1)

thread××L depth mm length mm kNmm mm mm

TSA-M6×25 8/25 M6 11 70 70 1.7TSA-M8×30 10/30 M8 15 90 90 2.8TSA-M10×40 12/40 M10 18 120 120 4.2TSA-M12×50 15/50 M12 21 150 150 7.4TSA-M16×60 20/60 M16 25 200 200 8.2TSA-M20×80 25/80 M20 35 250 250 9.5

1) Pull-out in 30 N/mm2 concrete. Safety factor of 5 included.

Anchor

Hammer tool

M11

020

Range Type Qty/Pack Art. No.

TSA-M6×25 100 2810 109TSA-M8×30 100 2810 125TSA-M10×40 50 2810 141TSA-M12×50 50 2810 166TSA-M16×60 25 2810 182TSA-M20×80 25 2810 208

TSAT-M6 1 2810 901TSAT-M8 1 2810 927TSAT-M10 1 2810 943TSAT-M12 1 2810 968TSAT-M16 1 2810 984TSAT-M20 1 2810 992

Anchors Brass anchorTMA

Drill a hole in accordance with the table. Clean thehole and install the brass anchor.

Attach the fixture by inserting and tightening a suitableM screw, thereby expanding the anchor.

M10

990

P10

24

Basic Data

Suitable forConcrete, stone, solid brick and other solidmaterials.

ApplicationsWherever you need a fixing point flush with thesurface in either ceiling, wall or floor surfaces.

Advantages• Shallow hole depth• No projecting parts• Captive fixing• No special tools required• Corrosion resistnat.

MaterialBrass


Range/Technical data (1 kN = 100 kg)

Type Qty/Pack Drill Min hole Min screw Recommended load2): Art. No.Inside Ø mm depth penetration Shear/pull-out in concretethread××L mm depth1) strength 25 N/mm2

mm mm kN

TMA-M4×16 100 5 19 16 0.4/0.15 2820 066TMA-M5×20 100 6 23 20 0.75/0.25 2820 082TMA-M6×24 100 8 27 24 1.5/0.65 2820 108TMA-M8×30 100 10 34 30 2.0/1.1 2820 124TMA-M10×34 50 12 38 34 2.5/1.6 2820 140TMA-M12×41 50 15 45 41 3.0/2.2 2820 165TMA-M16×45 50 20 50 45 4.0/3.3 2820 181

1) For full expansion.2) Safety factor 2.5 against shear and 3 against pull-out.

M11

000

P79

624

THB-4 × 110 50 1 1788 868

THB-5 × 110 50 1 1788 926 THB-5 × 160 100 1 1788 934

THB-5.5 × 110 50 1 1788 975 THB-5.5 × 160 100 1 1788 989

THB-6 × 110 50 1 1789 023THB-6 × 160 100 1 1789 016

THB-6.5 × 110 50 1 1789 028THB-6.5 × 160 100 1 1789 030

THB-7 x 110 50 1 1789 052THB-7 × 160 100 1 1789 054 THB-7 × 210 150 1 1789 063

THB-8 × 110 50 1 1789 080 THB-8 × 160 100 1 1789 108 THB-8 × 210 150 1 1789 116 THB-8 × 260 200 1 1789 120

THB-10 × 110 50 1 1789 146 THB-10 × 160 100 1 1789 153 THB-10 × 210 150 1 1789 165 THB-10 × 260 200 1 1789 173THB-10 × 310 250 1 1789 190 THB-10 × 450 400 1 1789 195

THB-11 × 210 150 1 1789 210THB-11 × 260 200 1 1789 212

THB-12 × 160 100 1 1789 252 THB-12 × 210 150 1 1789 272 THB-12 × 250 200 1 1789 304 THB-12 × 300 250 1 1789 312 THB-12 × 450 400 1 1789 319 THB-12 × 600 550 1 1789 323

Drill bits Hammer drill bitsTHB

P77

811

P10

28

Basic Data

Description Hammer drill bits for electro pneumatic rotaryhammer drilling machines with SDS taper.

Suitable forConcrete, brick, stone and rock.

Material High quality tungsten carbide tip with chromevanadium steel shaft.

ApprovalIn accordance with DIN 50049-3.1 A

Advantages• Special quality chrome vanadium steel• SDS shank fits a wide range of hammer

drilling machines• Wide complete range includes long drill bits

for difficult drilling situations

Range Type Drilling depth Qty/Pack Art. No. Ø ×× L mmmm

Range, cont’d Type Drilling depth Qty/Pack Art. No. Ø ×× L mmmm

Drill bits Hammer drill bitsTHB

THB-13 × 150 100 1 1789 325THB-13 × 250 200 1 1789 327THB-13 × 450 400 1 1789 340

THB-14 × 150 100 1 1789 350THB-14 × 200 150 1 1789 352 THB-14 × 250 200 1 1789 403 THB-14 × 450 400 1 1789 410 THB-14 × 600 550 1 1789 414

THB-15 × 150 100 1 1789 418 THB-15 × 250 200 1 1789 429 THB-15 × 450 400 1 1789 430

THB-16 × 150 100 1 1789 440 THB-16 × 200 150 1 1789 450 THB-16 × 300 250 1 1789 455 THB-16 × 450 400 1 1789 470THB-16 × 600 550 1 1789 481

THB-18 × 200 150 1 1789 483THB-18 × 300 250 1 1789 484THB-18 × 450 400 1 1789 485

THB-20 × 200 150 1 1789 494 THB-20 × 300 250 1 1789 496THB-20 × 450 400 1 1789 500THB-20 × 600 550 1 1789 510

THB-22 × 250 200 1 1789 518THB-22 × 450 400 1 1789 520

THB-24 × 250 200 1 1789 530THB-24 × 450 400 1 1789 532

THB-25 × 450 400 1 1789 570 THB-25 × 600 550 1 1789 585THB-26 × 450 400 1 1789 587

P77

811

Basic Data

Description Range of screw bits and magnetic holders whichis adapted to our range of installation screws.

Suitable forBits: Screws with cross recess.Magnetic holders: Screws with 1/4”–5/16” hexa-gon head. TST and TSB screws.

Advantages• Screw bit range adapted to our screw range• Phillips or Pozidriv cross recess, available in

three sizes • Many lengths, varying between 25 mm and

110 mm• Long bits well suited for access in limited

spaces• Hardened steel provides good durability and

fit• Magnetic holders suit all our hexagon-head

collar screws• Extra thin, long magnetic holder for access in

limited spaces• Combination bits Pozidriv and Phillips in either

end• Standard 1/4” hexagon drive end• Packed in twos in blister package

Material Steel, hardened in a special process.

StandardsISO 1173-1975DIN 3126

PackagingBlister package, except TST-V 12.7×43 which ispacked in a plastic bag.

Drill bits Bits and magnetic holdersPH/PZ/TST-V

P17

73

PH 1 × 25 1/4" × 25 2 1772 042PH 2 × 25 1/4" × 25 2 1772 054PH 3 × 25 1/4" × 25 2 1772 062PH 2 × 25 reduced 1/4" × 25 2 1772 052

PZ 1 × 25 1/4" × 25 2 1772 142PZ 2 × 25 1/4" × 25 2 1772 006PZ 3 × 25 1/4" × 25 2 1772 016

PH 1 × 50 1/4" × 50 2 1772 044PH 2 × 50 1/4" × 50 2 1772 056PH 3 × 50 1/4" × 50 2 1772 064

PZ 1 × 50 1/4" × 50 2 1772 144PZ 2 × 50 1/4" × 50 2 1772 008PZ 3 × 50 1/4" × 50 2 1772 018

PH 2 × 110 1/4" × 110 2 1772 058PH 3 × 110 1/4" × 110 2 1772 066

PZ 2 × 110 1/4" × 110 2 1772 010PZ 3 × 110 1/4" × 110 2 1772 020

PH/PZ 1 × 60 1/4" × 60 2 1772 072PH/PZ 2 × 60 1/4" × 60 2 1772 082PH/PZ 3 × 60 1/4" × 60 2 1772 092

TST-V 9 × 100 1/4" 9 × 100 1 1772 120TST-V 10 × 45 1/4" 10 × 45 1 1772 125TST-V 12.7 × 43 5/16" 12.7 × 43 1 1772 103

Drill bits Bits and magnetic holdersPH/PZ/TST-V

Range

Screw bits Type Dimensions Qty/Pack Art. No. hexagon ×× L

Phillips, to be used together with extension holder

Pozidriv, to be used together with extension holder

Phillips, to be used together with screw-driver

Pozidriv, to be used together with screw-driver

Range

Magnetic holdersType Int. hexagon Dimensions Qty/Pack Art. No.

Ø ×× L mm

To be used with screw-driver in narrow spaces

Phillips, to be used together with screw-driver in narrow spaces

Pozidriv, to be used together with screw-driver in narrow spaces

Phillips/Pozidriv, to be used together with screw-driver

P60

823

P60

489

P80

841

P80

841

P60

813

P60

813

P60

489

Fixing bands Fixing bandsTUB, TGB, TRB, TPG

TGB Galvanized StripCold-rolled and galvanized steel strip with close-ly punched holes, for easy installation.TGB-25x1.2 has been granted type approval(2403/82) for fire protection classification A15.

P10

33P

1081

P10

82

P80

830

P10

80P

1079

P10

83

P10

32

Basic Data

Suitable forSuspended installation, anchoring, etc. in electri-cal, building and heating, ventilation and sanita-tion installations.

Advantages• Wide range• Can support anything from light weight to very

heavy installations• Can withstand most installation situations in all

types of environment• Corrosion resistant• Easy to cut and shape• Fire rated.

Temperature rangeType TUB, TPG –40 to +60 °C.Type TGB, TRB –40 to +100 °C.

PackagingCardboard carton (TUB), or plastic bag (RGB,TRB, TPG).

TUB Plastic-enclosed universal stripCold-rolled and galvanized steel strip, enclosedwith UV-stabilized, self-extinguishing PELD,polyethylene. The plastic encloses the wholestrip and also fills out the punched holes. Thismeans that no humidity can come through at thescrew passages, which makes the strip veryresistant to corrosion.

TRB Stainless stripStainless steel strip for demanding installationsin all environment classes.TRB-30x1 has been granted type approval(2403/82) for fire protection classification A30.

TPG Galvanized plastic coated stripCold-rolled and galvanized steel band, coatedwith white PVC plastic. Closely punched holesfor easy installation.

TUB

TGB-11x0.7

TGB-12x0.7TGB-20x1TGB-25x2

TRB-30x1

TRB-11x0.7

TGB-20x0.7TGB-25x1.2

Examples of applications

M10

950

TPG

Fixing bandsTUB, TGB, TRB, TPG

Fixing bands

Range

Type Colour Finish Dimensions Qty/Pack Package Art. No.w/t Length mm m/roll

TP 0 White 100 1030 000TUB-8 White PVC coated 9/2.5 10 1 Carton 2703 015TUB-8 Grey “ 9/2.5 10 1 “ 2703 023TUB-8 Black “ 9/2.5 10 1 “ 2703 035TUB-12 White “ 14/2.5 10 1 Carton 2704 013TUB-12 Grey “ 14/2.5 10 1 “ 2704 021TUB-12 Orange “ 14/2.5 10 1 “ 2704 054TUB-12 Black “ 14/2.5 10 1 “ 2704 063TUB-22 Black “ 21/2.8 5 1 Carton 2705 008TUB-22 White “ 21/2.8 5 1 “ 2705 010TUB-22 Grey “ 21/2.8 5 1 “ 2705 028

TGB-11×0.7 – Galvanized 11/0.7 25 1 Plastic bag 2705 030

TGB-12×0.7 – “ 12.7/0.7 10 1 Plastic bag 2705 110TGB-20×0.7 – “ 20/0.7 25 1 “ 2705 310TGB-20×1 – “ 20/1 10 1 “ 2705 320TGB-25×1.2 – “ 25/1.2 25 1 “ 2705 410TGB-25×2 – “ 25/2 10 1 “ 2705 420

TRB-11×0.7 – Stainless steel 11/0.7 10 1 Plastic bag 2710 010

TRB-30×1 – “ 30/1 10 1 Plastic bag 2710 040

TPG-12 White Plastic coated 12.7/0.6 10 1 Plastic bag 2740 017TPG-20 White “ 20/1 10 1 “ 2741 015

TUB

TGB

TRB

TPG


Type Finish1) Hole size Practical loading Fire rating Suitable fixingFe/Zn mm capacity kN2)

TP 0 White 100 1030 000TUB-8 20+PELD � 5.5×5.5 0.4 TPS 5TUB-12 20+PELD � 6×6 1.0 TPS 6TUB-22 20+PELD � 8×8 2.6 TPS 8

TGB-11×0.73) 20 Ø 4.5 1.0 A15 Load 500 N TPS 4TGB-12×0.7 20 Ø 2.5/5 1.2 “ TPS 5TGB-20×0.7 20 Ø 3.5/4.5/6.5/8.5 1.8 “ TPS 4/6/8, TLF-8×65TGB-20×1 20 Ø 3.5/7 2.5 “ TPS 6TGB-25×1.2 20 Ø 4.5/6.5/8.5/10.5 3.5 “ TPS-6/8TGB-25×2 20 Ø 4/8 7.0 “ TPS 8

TRB-11×0.73) – Ø 4.5 1.2 A60 Load 250 N TPS 4, SEVENHOOKA30 Load 500 N

TRB-30×1 – Ø 8.5/10.5 5.0 A30 Load 1000 N TLF-8×65

TPG-12 20+PVC Ø 2.5/5 1.0 TPS 5TPG-20 20+PVC Ø 3.5/7 2.8 TPS 6

1) Surface coating explanations: Fe/Zn 20 = 20 µm zinc per side, PELD = Polethylene, low density UV- stabilized and self-extinguishing,PVC = Polyvinyl chloride plastic, 100 µm per side

2) Safety factor 1.8 for breaking load.3) TGB-11×0.7 and TRB-11×0.7 = special band for direct, self-locking suspension mounting in SEVENHOOK.

TUB

TGB

TRB

TPG

P10

33P

1081

P10

80P

1079

P10

83P

8083

0

Fixing bands Fixing bandsTAP, TAG, TAC

TAP Plastic Coated StripEasy bend figure 8 configuration. Cold rolledand zinc plated steel strip, UV-stabilized andself-extinguishing polyethylene (PEL). The plas-tic encloses the whole strip, even the punchedholes.

P37

87

Basic Data

Suitable forSuspended installation, anchoring, etc. in electri-cal, building and heating, ventilation and sanita-tion installations.

Advantages• Wide range• Can support anything from light weight to very

heavy installations• Can withstand most installation situations in all

types of environment• Corrosion resistant• Easy to cut and shape• Fire rated.

Temperature range–40° to +50 °C

PackagingCardboard carton

TAG Galvanized StripEasy bend figure 8 configuration. Cold rolledand zinc coated steel strip, with closely punchedholes for easy installation.

TAC Copper Strip Easy bend figure 8 configuration. Copper stripfor specialist installations. Corrosion resistant.

Examples of applications

P1267

P1266

P3535

A12

720

Fixing bandsTAP, TAG, TAC

Fixing bands


TP 0 White 100 1030 000TAP 12×0.7 S Black 10 m 2700 510TAP 12×0.7 V White 10 m 2700 511TAP 12×0.7 G Grey 10 m 2700 512TAP 12×0.7 R Red 10 m 2700 513TAP 12×0.7 O Orange 10 m 2700 514

TAP 17×0.7 S Black 10 m 2700 530TAP 17×0.7 V White 10 m 2700 531TAP 17×0.7 G Grey 10 m 2700 532TAP 17×0.7 R Red 10 m 2700 533TAP 17×0.7 O Orange 10 m 2700 534

TAP 26×1 S Black 10 m 2700 550TAP 26×1 V White 10 m 2700 551TAP 26×1 G Grey 10 m 2700 552

TAG 12×0.7 – 10 m 2700 610TAG 17×0.7 – 10 m 2700 630TAG 26×1 – 10 m 2700 650

TAC 12×0.9 – 10 m 2700 710TAC 17×0.9 – 10 m 2700 730TAC 26×1.2 – 10 m 2700 750

TAP

TAG

TAC


Type Surface coating1) Band dimension Hole size Practical loading w/t mm mm capacity2)

kN

TP 0 White 100 1030 000TAP 12×0.7 Fe/Zn 20 + Abcite® 13/1.3 Ø 4.5 0.7TAP 17×0.7 Fe/Zn 20 + Abcite® 18/1.3 Ø 6.5 1.0TAP 26×1 Fe/Zn 20 + Abcite® 27/1.6 Ø 8 2.5

TAG 12×0.7 Fe/Zn 20 12/0.7 Ø 5 0.7TAG 17×0.7 Fe/Zn 20 17/0.7 Ø 7 1.0TAG 26×1 Fe/Zn 20 26/1 Ø 8.5 2.5

TAC 12×0.9 – 12/0.9 Ø 5 0.5TAC 17×0.9 – 17/0.9 Ø 7 0.7TAC 26×1.2 – 26/1.2 Ø 8.5 1.7

1) Explanation of surface coating info:Fe/Zn 20 = 20 µm zinc per sideAbcite® = thermoplastic powder coating

2) Safety factor 1.8 for breaking load.

TAP

TAG

TAC

P12

67P

1266

P35

35

Screws Universal ScrewTEL-C3

P79

804

Basic Data

DescriptionWood screw with panhead and Phillips crossrecess. Sharp point, single thread, fully thread-ed. Corrosivity category C3.

Suitable forWood, wood fibreboard and plasterboard andtogether with plugs. Mounting with cross-point orpower screwdriver.

Material Hardened zinc/iron electroplated steel withThorsman SECOR® corrosion protection.Corrosivity category C3.

Advantages• Hardened electroplated steel.• Panhead with Phillips cross recess – strong

and secure when mounting with hand and power screwdriver.

• High pitch – much faster than conventional wood screws.

• Extra sharp point – no hole notch necessary in soft materials.

• Fully threaded – works well in thin materials.

Standards and regulations• Corrosivity category C3 in accordance with

SS-EN ISO 12944-2.• Construction Regulations issued by National

Board of Housing, Building and Planning (BKR).

CertificatesSITAC Technical Approval of Thorsman SECOR®

corrosion protection, No. 0035/04.


Range Type Ø ×× L Qty/Pack Art. No.mm

TEL-C3 4.2 × 21 100 3760 1004.2 × 25 100 3760 1054.2 × 35 100 3760 1104.2 × 45 100 3760 1154.2 × 58 100 3760 1204.2 × 69 100 3760 125

P81

303

Screws Wood ScrewTGS-C3

P79

801

P81

322

Basic Data

DescriptionWood screw with panhead and Phillips crossrecess. Sharp point, twin thread, fully threaded.Corrosivity category C3.

Suitable forWood and wood fibreboard and together withplugs. Mounting with cross-point or power screw-driver.

Material Electroplated steel with Thorsman SECOR® cor-rosion protectionHardened zinc/iron electroplat-ed steel with Thorsman SECOR® corrosion pro-tection. Corrosivity category C3.

Advantages• Hardened electroplated steel.• Panhead with Phillips cross recess – steady

mounting with magnetic socket and power screwdriver.

• Twin threaded – fast and easy running.• High pitch – much faster than conventional

wood screws.• Extra sharp point – no hole notch necessary

in soft materials.• Fully threaded – works well in thin materials.








TGS-C3 3.5 × 19 100 3711 0103.5 × 32 100 3711 015

4.2 × 13 100 3711 0204.2 × 16 100 3711 0254.2 × 19 100 3711 0304.2 × 25 100 3711 0354.2 × 32 100 3711 0404.2 × 38 100 3711 0454.2 × 45 100 3711 0504.2 × 65 100 3711 0524.2 × 85 100 3711 054

4.8 × 38 100 3711 0564.8 × 50 100 3711 058

Screws Self-tapping ScrewTGE-C3

P79

805

Basic Data

DescriptionScrew with panhead and Phillips cross recess.Drill point, single thread, fully threaded. Corro-sivity category C3.

Suitable forMounting of sheet metal without pilot drilling,maximum 2×1.5 mm. Mounting with powerscrewdriver.



and secure when mounting with hand and power screwdriver.

• Penetrates 2×1.5 mm sheet metal.• Fully threaded – works well in thin materials.• Single thread – for optimum drilling capacity.








TGE-C3 3.5 × 11 100 3709 7804.2 × 16 100 3709 7824.2 × 19 100 3709 7844.2 × 25 100 3709 786

P81

321

Screws Self-tapping ScrewTSE-C3

P79

802

Basic Data

DescriptionScrew with large thin head and Phillips crossrecess. Drill point, single thread, fully threaded.Corrosivity category C3.

Suitable forMounting of sheet metal to sheet metal, maxi-mum 2×1.5 mm. Mounting with power screw-driver.


Advantages• Hardened electroplated steel.• Drill point and self-tapping thread for installa-

tion in steel or sheet metal.• Penetrates 2×1.5 mm sheet metal without

pilot drilling.• Extra broad head, 11.2 mm – good function

in thin and soft materials.• No. 2 Phillips cross recess – ordinary screw-

drivers and bits can be used.• Fully threaded – works well in thin materials.








TSE-C3 4.2 × 13 100 3782 6304.2 × 32 100 3782 640

P81

319

Screws Self-tapping ScrewTSS-C3

P81

320

P79

810

Basic Data

DescriptionScrew with panhead and Phillips cross recess.Drill point, single thread, fully threaded.Corrosivity category C3.







drivers and bits can be used.• Fully threaded – works well in thin materials.








TSS-C3 2.9 × 9.5 500 3782 630

Screws Collar ScrewTSB-C3

P79

806

Basic Data

DescriptionCollar screw with hexagon head and Phillipscross recess. Drill point, single thread, fullythreaded. Corrosivity category C3.

Suitable forSheet steel, maximum 2×1.5 mm. Mounting withcross-point screwdriver or magnetic socket.


Advantages• Hardened electroplated steel.• Hexagon head 1/4" with Phillips cross recess

– steady mounting with magnetic socket and power screwdriver.

• Self-tapping screw with drill point to penetratesteel or metal.

• Collar Ø 8.3 mm – with the function of asmall ’washer’.

• Penetrates 2×1.5 mm sheet metal withoutpilot drilling.

• Fully threaded – works well in thin materials.• Extra slim, long magnetic socket and long

Phillips bits – accessories for confined spaces.








TSB-C3 3.5 × 13 100 3780 910 3.5 × 19 100 3780 9153.5 × 25 100 3780 920

4.2 × 13 100 3780 9254.2 × 19 100 3780 9304.2 × 25 100 3780 9354.2 × 32 100 3780 9404.2 × 38 100 3780 945

P81

318

Screws Collar ScrewTST-C3

P79

809

Basic Data

Description Collar screw with hexagon head, Phillips crossrecess. Twin thread. Fully threaded. Corrosivitycategory C3.

Suitable forWood and wood fibreboard, sheet steel, andtogether with plugs. Mounting with cross-pointscrewdriver or magnetic socket.


Advantages• Hardened electroplated steel.• Hexagon head 1/4”–5/16” (Ø 5.5) with

Phillips cross recess – steady mounting with magnetic socket and power screwdriver.

• Extra sharp-pointed, self-tapping screw.• Twin steep-pitch thread – fast and easy

running.• Collar Ø 8.3–10.1 mm – with the function of a

small “washer”.• Penetrates 2 × 0.9 mm sheet metal without

pilot drilling.• Fully threaded – works well in thin materials.• Works in most materials – sheet metal

studwork, wood, plugs.• Extra slim, long magnetic socket and long









TST-C3 3.5 × 13 100 3780 5503.5 × 19 100 3780 5523.5 × 25 100 3780 5543.5 × 32 100 3780 5563.5 × 38 100 3780 558

4.2 × 13 100 3780 5604.2 × 19 100 3780 5624.2 × 25 100 3780 5644.2 × 32 100 3780 5664.2 × 38 100 3780 5684.2 × 51 100 3780 570

4.8 × 19 100 3780 5724.8 × 25 100 3780 5744.8 × 38 100 3780 5764.8 × 51 100 3780 578

5.5 × 38 100 3780 580

P81

317

Screws Installation ScrewTSC-C3

P79

803

Basic Data

DescriptionScrew with large thin head and Phillips crossrecess. Sharp point, twin steep-pitch thread, fullythreaded (smaller sizes). Corrosivity categoryC3.

Suitable forMounting of sheet metal to sheet metal. Worksin most materials – metal studwork, cabinets,wood, plugs. Mounting with cross-point or powerscrewdriver.


Advantages• Hardened electroplated steel.• Extra sharp-pointed screw with self-tapping

thread.• Penetrates 2×0.9 mm sheet metal without


in thin and soft materials.• Twin steep-pitch thread – fast and easy run-

ning.• No. 2 Phillips – ordinary screwdrivers and

bits can be used.• Fully threaded (except TSC-C3 45, 65, 85)

– works well in thin materials.• Works in most materials – sheet metal

studwork, cabinets, wood, plugs.• Boxes of 100 – easy to handle (TSC-C3

4.2×85 = boxes of 50)






PackagingCardboard carton containing.


TSC-C3 4.2 × 13 100 3782 2104.2 × 25 100 3782 2154.2 × 32 100 3782 2204.2 × 45 100 3782 2254.2 × 65 100 3782 2304.2 × 85 50 3782 235

P81

316

Screws Installation ScrewTSF-C3

P79

807

Basic Data

DescriptionScrew with raised countersunk head and Phillipscross recess. Sharp point, fully threaded.Corrosivity category C3.

Suitable forMounting directly into plasterboard. Mountingwith cross-point power screwdriver.


Advantages• Hardened electroplated steel.• Extra sharp-pointed screw with wood screw

thread.• Installs directly into plaster board.• No. 2 Phillips cross recess — ordinary screw-

drivers and bits can be used.• Fully threaded.• Boxes of 100 — easy to handle.








TSF-C3 4.8 × 12 100 3782 510 4.8 × 25 100 3782 5154.8 × 35 100 3782 5204.8 × 45 100 3782 525

P81

315

Screws Installation ScrewTSI-C3

P79

808

Basic Data

DescriptionScrew with countersunk head and Phillips crossrecess. Sharp point, fully threaded. Corrosivitycategory C3.

Suitable forMounting of plasterboard panels to steel andtimber studwork. Mounting with cross-point orpower screwdriver.


Advantages• Hardened electroplated steel.• Extra sharp-pointed screw with steep-pitch

thread — for fast mounting.• Penetrates 0.7 mm sheet metal without pilot

drilling.• Countersunk head — easy to conceal in the

plasterboard.• No. 2 Phillips — ordinary screwdrivers and

bits can be used.• Fully threaded — works well in thin materials.








TSI-C3 3.9 × 32 100 3782 8303.9 × 41 100 3782 840

P81

314

Screws Wood ScrewTGS

P81

322

P79

926

Basic Data

Description Wood screw with panhead, Phillips cross re-cess. Twin thread, sharp point. Fully threaded.

Suitable forWood and wood fibreboard and together withplugs. Mounting with cross-point or power screw-driver.


and secure when mounting with hand or power screwdriver.

• Twin threaded – fast and easy running.• High pitch – much faster than conventional

wood screws.• Extra sharp point – no hole notch necessary

in soft materials.• Fully threaded – works well in thin materials.

Material Hardened electroplated steel.



TGS-45 3.5 × 19 100 3709 810TGS-46 3.5 × 32 100 3709 815

TGS-47 4.2 × 13 100 3709 830TGS-48 4.2 × 16 100 3709 835TGS-49 4.2 × 19 100 3709 840TGS-50 4.2 × 25 100 3709 845TGS-51 4.2 × 31 100 3709 850TGS-52 4.2 × 38 100 3709 855TGS-53 4.2 × 45 100 3709 860TGS-54 4.2 × 65 100 3709 865TGS-57 4.2 × 85 100 3709 870

TGS-55 4.8 × 38 100 3709 880TGS-56 4.8 × 50 100 3709 885

Screws Collar ScrewTST

P81

317

P79

812

Basic Data

Description Collar screw with hexagon head, Phillips crossrecess. Twin thread. Fully threaded.

Suitable forWood and wood fibreboard, sheet steel, andtogether with plugs. Mounting with cross-pointscrewdriver or magnetic socket.

Advantages• Hardened electroplated steel.• Hexagon head 1/4”–5/16” with Phillips cross

recess – strong and secure when mounting with magnetic socket and power screwdriver.

• Extra sharp-pointed, self-tapping screw.• Twin steep-pitch thread – fast and easy

running.• Collar Ø 8.3–10.1 mm – with the function of a

small ‘washer’.• Penetrates 2 × 0.9 mm sheet metal without

pilot drilling.• Fully threaded – works well in thin materials.• Works in most materials – sheet metal

studwork, wood, plugs.• Boxes of 100 – easy to handle.• Extra slim, long magnetic socket and long





TST-6×1/2 3.5 × 13 100 3780 110TST-6×3/4 3.5 × 19 100 3780 115TST-6×1 3.5 × 25 100 3780 120TST-6×11/4 3.5 × 32 100 3780 125TST-6×11/2 3.5 × 38 100 3780 130

TST-8×1/2 4.2 × 13 100 3780 210TST-8×3/4 4.2 × 19 100 3780 215TST-8×1 4.2 × 25 100 3780 220TST-8×11/4 4.2 × 32 100 3780 225TST-8×11/2 4.2 × 38 100 3780 230TST-8×2 4.2 × 51 100 3780 235

TST-10×3/4 4.8 × 19 100 3780 310TST-10×1 4.8 × 25 100 3780 315TST-10×11/4 4.8 × 32 100 3780 320TST-10×11/2 4.8 × 38 100 3780 325TST-10×2 4.8 × 51 100 3780 330

TST-12×11/2 5.5 × 38 100 3780 410

Screws Collar ScrewTSB

P81

318

P79

928

Basic Data

Description Collar screw with hexagon head, Phillips crossrecess. Drill point. Single thread. Fully threaded.

Suitable forSheet steel, maximum 2×1.5 mm. Mounting withcross-point screwdriver or magnetic socket.

Advantages• Hardened electroplated steel.• Hexagon head 1/4" with Phillips cross recess

– strong and secure when mounting withmagnetic socket and power screwdriver.

• Self-tapping screw with drill point to penetratesteel or metal.

• Collar Ø 8.3 mm – with the function of asmall ’washer’.

• Penetrates 2×1.5 mm sheet metal withoutpilot drilling.

• Fully threaded – works well in thin materials.• Boxes of 100 – easy to handle.• Extra slim, long magnetic socket and long





TSB-6×1/2 3.5 × 13 100 3780 610TSB-6×3/4 3.5 × 19 100 3780 615TSB-6×1 3.5 × 25 100 3780 620TSB-6×11/4 3.5 × 32 100 3780 625TSB-6×11/2 3.5 × 38 100 3780 630

TSB-8×1/2 4.2 × 13 100 3780 710TSB-8×3/4 4.2 × 19 100 3780 715TSB-8×1 4.2 × 25 100 3780 720TSB-8×11/4 4.2 × 32 100 3780 725TSB-8×11/2 4.2 × 38 100 3780 730

Screws Installation ScrewTSF

P81

315

P79

925

Basic Data

DescriptionScrew with raised countersunk head, Phillipscross recess. Fully threaded.

Suitable forMounting directly into plasterboard. Mountingwith cross-point power screwdriver.

Advantages• Hardened electroplated steel.• Extra sharp-pointed screw with wood screw

thread.• Installs directly into plaster board.• No. 2 Phillips cross recess – ordinary screw-

drivers and bits can be used.• Fully threaded – works well in thin materials.• Boxes of 100 – easy to handle.




TSF-12 4.8 12 100 3782 410TSF-25 4.8 × 25 100 3782 420TSF-35 4.8 × 35 100 3782 430TSF-45 4.8 × 45 100 3782 440

Screws Installation ScrewTSI

P81

314

P79

813

Basic Data

DescriptionScrew with countersunk head, Phillips crossrecess.

Suitable forMounting of plasterboard panels to steel andtimber studwork. Mounting with cross-point orpower screwdriver.

Advantages• Hardened electroplated steel.• Extra sharp-pointed screw with steep-pitch

thread – for fast mounting.• Penetrates 0.7 mm sheet metal without pilot

drilling.• Countersunk head – easy to conceal in the

plasterboard.• No. 2 Phillips – ordinary screwdrivers and

bits can be used.• Fully threaded – works well in thin materials.• Boxes of 100 – easy to handle.




TSI-308 3.9 × 32 100 3782 810TSI-408 3.9 × 41 100 3782 820

Screws Installation ScrewTSC

P81

283

Basic Data

Description Screw with large thin head, Phillips crossrecess. Twin thread. TSC-31, 32, 33 fully thread-ed, TSC-BH part-threaded.

Suitable forMounting of sheet metal to sheet metal. Worksin most materials – metal studwork, cabinets,wood, plugs. Mounting with cross-point or powerscrewdriver.

Advantages• Hardened electroplated steel.• Extra sharp-pointed screw with self-tapping

thread.• Penetrates 2×0.9 mm sheet metal without


in thin and soft materials.• Twin steep-pitch thread – fast and easy run-

ning.• No. 2 Phillips – ordinary screwdrivers and

bits can be used.• Fully threaded (except TSC-BH45, 65, 85

and 100) – works well in thin materials.• Works in most materials – sheet metal

studwork, cabinets, wood, plugs.• Boxes of 100 – easy to handle (TSH-BH85

and 100 = boxes of 50).

Material Hardened electroplated steel. TSC-BH45, BH65,BH85 and BH100 are also yellow-chromated.



TSC-31 4.2 × 13 100 3782 010TSC-32 4.2 × 25 100 3782 020TSC-33 4.2 × 31 100 3782 030TSC-BH45 4.2 × 45 100 3782 040TSC-BH65 4.2 × 65 100 3782 050TSC-BH85 4.2 × 85 50 3782 060

TSC-BH100 4.8 × 100 50 3782 070

P81

316

Screws Self-tapping ScrewTSE

P79

927

Basic Data

DescriptionScrew with large thin head, Phillips crossrecess. Drill point. Single thread. Fully threaded.






drivers and bits can be used.• Fully threaded – works well in thin materials.• Boxes of 100 – easy to handle.




TSE-34SZ 4.2 × 13 100 3782 610TGE-36SZ 4.2 × 31 100 3782 620

P81

319

Screws Self-tapping ScrewTGE

P81

321

P79

811

Basic Data

DescriptionScrew with panhead, Phillips cross recess. Drillpoint. Single thread. Fully threaded.

Suitable forMounting of sheet metal without pilot drilling,maximum 2×1.5 mm. Mounting with powerscrewdriver.


and secure when mounting with power screw-driver.

• Penetrates 2×1.5 mm sheet metal.• Fully threaded – works well in thin materials.• Single thread – for optimum drilling capacity.




TGE-T11 3.5 × 11 100 3709 710

TGE-T16 4.2 × 16 100 3709 720TGE-T19 4.2 × 19 100 3709 730TGE-T25 4.2 × 25 100 3709 740TGE-T32 4.2 × 32 100 3709 750

TGE-T50 4.8 × 50 100 3709 760

Screws Cross Recessed ScrewMRX

P81

313

P80

840

P80

839

P79

929

Basic Data

Description Screw with metric thread and panhead, Phillipscross recess. Hexagon nut with metric thread,round washer.

Suitable forAssembly and mounting of components.Mounting with cross-point screwdriver or powerscrewdriver.

Advantages• Range M3–M8 with screw, nut and washer.• Electroplated steel.• Metric screw with panhead and Phillips cross

recess.• Boxes of 100 – easy to handle.

Material Screw: electroplated steel 4.8Nut: electroplated steel 6.8Washer: Electroplated steel

StandardsScrew MRX: ISO 7045Nut M6M: ISO 4032Washer RB: DIN 125A

PackagingCardboard carton containing 100 screws.


MRX M3 × 25 100 3702 010M3 × 45 100 3702 020M4 × 25 100 3702 040M4 × 50 100 3702 050M5 × 25 100 3702 070M5 × 50 100 3702 080M6 × 25 100 3702 100M6 × 50 100 3702 110M8 × 25 100 3702 130M8 × 50 50 3702 140

M6M M3 100 3702 260M4 100 3702 265M5 100 3702 270M6 100 3702 275M8 100 3702 280

RB 3.2 × 7 × 0.5 100 3702 2104.3 × 9 × 0.8 100 3702 2155.3 × 10 × 1 100 3702 2206.4 × 12 × 1.6 100 3702 2258.4 × 16 × 1.6 100 3702 230

Screw

Washer

Nut

Cabling material ClipsTC, TCD and TDC

P81

286

Basic Data

DescriptionA wide range of clips in various designs anddimensions, colours, nails and packages,intended for the intallation of round and flatcables.The range includes clips with thick nails andclips with acid resistant nails, see product tables.

Suitable forWood, masonry and compressed board. In othermaterials, such as plasterboard, concree, lowdensity material and brick, use in conjunctionwith TCP plugs.Round TC clips are intended for the installationof round cables. Flat TC slips are intended forthe installaiton of flat cables.TCD and TDC clips are intended for the installa-tion of two flat cables.

Advantages• Safety nail bends before breaking.• Can withstand high impact together with

extremes of heat, cold and acid, multi-range ofcable size per clips.

• Flexible design for use with various size of cable.

• Colour coded packaging.• Nails available in several thicknesses, electro-

plated or stainless steel.• Wide range of clips in various designs, dimen-

sions, nails and colours.

Material Clips: Impact resistant PP (polypropylene).Nails: Hardened and electroplated steel, zinccoating Fe/Zn 8C1 (8 µm); or acid resistant steel.

Temperature Range- 40 to +80 °C.


Mounting Instruction

Wood and compressed board: Nail in.Thick nails in brick joints.

Concrete, low density materials, brick, etc: UseTCP clip plugs. Hammer the clip plug into light-weight concrete without predrilling. Not for thicknails.

Plasterboard: Use TCP clip plugs. Make a holein single plasterboard sheets with an awl. Thestart of a hole is sufficient in double plasterboardsheets.

P67

882

P67

886

P67

883

ClipsTC

Cabling material

Range

Type Colour Dimensions Qty/Pack Art. No.Nail Ø/A/B

TC 2-3 Clear 1.2/15/11 100 2001 008

TC 3-5 Clear 1.2/20/15 100 2011 005White 1.2/20/15 100 2011 017Grey 1.2/20/15 100 2011 021Black 1.2/20/15 100 2011 030

TC 4-6 Clear 1.4/20/14 100 2015 105White 1.4/20/14 100 2015 110Grey 1.4/20/14 100 2015 121Black 1.4/20/14 100 2015 130

TC 5-7 Clear 1.2/20/12 100 2021 004White 1.2/20/12 100 2021 012Grey 1.2/20/12 100 2021 020Black 1.2/20/12 100 2021 046Orange 1.2/20/12 100 2021 053

TC 5-7 Clear 2.0/25/18 100 2022 000White 2.0/25/18 100 2022 010Black 2.0/25/18 100 2022 020Grey 2.0/25/18 100 2022 030

TC 7-10 Clear 1.6/25/16 100 2032 005White 1.6/25/16 100 2032 019Grey 1.6/25/16 100 2032 027Light grey 1.6/25/16 100 2032 035Black 1.6/25/16 100 2032 043Orange 1.6/25/16 100 2032 050Red 1.6/25/16 100 2032 067Brown 1.6/25/16 100 2032 100

TC 7-10 White 1.6/30/21 100 2033 017Light grey 1.6/30/21 100 2033 033

TC 7-10 White 2.0/25/16 100 2032 011Grey 2.0/25/16 100 2032 021Black 2.0/25/16 100 2032 041Orange 2.0/25/16 100 2032 051Red 2.0/25/16 100 2032 061Brown 2.0/25/16 100 2032 091

TC 8-12 White 2.0/30/19 100 2041 200Light grey 2.0/30/19 100 2041 218Black 2.0/30/19 100 2041 240Grey 2.0/30/19 100 2041 259Brown 2.0/30/19 100 2041 267

TC 8-12 Light grey 2.0/35/24 100 2041 274

TC 8-12 White 2.0/45/34 100 2041 283Brown 2.0/45/34 100 2041 291

TC 10-14 White 2.0/30/17 100 2042 018Grey 2.0/30/17 100 2042 026Light grey 2.0/30/17 100 2042 034Black 2.0/30/17 100 2042 042Orange 2.0/30/17 100 2042 059

TC 10-14 White 2.0/35/22 100 2043 016Light grey 2.0/35/22 100 2043 032

TC 10-14 White 2.0/45/32 100 2045 012

TC 10-14 White 2.5/30/17 100 2042 011Grey 2.5/30/17 100 2042 021Black 2.5/30/17 100 2042 041Orange 2.5/30/17 100 2042 051

TC 14-20 White 2.0/35/18 100 2052 017Grey 2.0/35/18 100 2052 025Light grey 2.0/35/18 100 2052 033

TC 14-20 Black 2.0/45/28 100 2052 0582.0/45/28 100 2053 015

Light grey 2.0/45/28 100 2053 031

TC 14-20 White 2.5/35/18 100 2052 011Grey 2.5/35/18 100 2052 021Black 2.5/35/18 100 2052 051

Round clip with nail of hardened and electroplated steel

P79

658

Round clip with nail of hardened and electroplated steel, cont’d

ClipsTC, TCD and TDC

Cabling material

Range

Type Colour Dimensions Qty/Pack Art. No.Nail Ø/A/B

TC 18-22 White 2.5/45/25 50 2060 002Light grey 2.5/45/25 50 2060 028Black 2.5/45/25 50 2060 135

TC 18-22 Black 2.5/55/35 50 2060 143

TC 22-26 White 2.5/45/21 50 2070 001Light grey 2.5/45/21 50 2070 027Black 2.5/45/21 50 2070 134

TC 22-26 Black 2.5/55/31 50 2070 142White 2.5/55/31 50 2070 209Light grey 2.5/55/31 50 2070 217

TC 5-7 Black 1.2/20/12 100 2021 207

TC 7-10 White 1.6/25/16 100 2034 015Black 1.6/25/16 100 2034 061

TC 8-12 White 2.0/30/19 100 2041 309

TC 10-14 White 2.0/30/17 100 2044 014Black 2.0/30/17 100 2044 060

TC 14-20 White 2.0/35/18 100 2054 013Black 2.0/35/18 100 2054 069

TC 18-22 Grey 2.5/45/25 50 2060 127

TC 22-26 Grey 2.5/45/21 50 2070 126

TC 2×4 Clear 1.4/15/11 100 2101 004TC 3×5 Clear 1.2/20/15 100 2106 003

TC 4×6 White 1.4/20/14 100 2111 031Clear 1.4/20/14 100 2111 003Grey 1.4/20/14 100 2111 029

TC 5×8 White 2.0/25/18 100 2116 010Grey 2.0/25/18 100 2116 028Black 2.0/25/18 100 2116 030

TC 6×10 White 2.0/25/17 100 2126 019Grey 2.0/25/17 100 2126 027

TC 7×14 White 2.0/25/16 100 2131 010

TC 7/14 White 2.5/25/19 100 2131 019Grey 2.5/25/16 100 2131 027Light grey 2.5/25/16 100 2131 036

TC 9×18 White 2.0/30/18 100 2136 010

TC 9×18 White 2.5/30/18 100 2136 018Grey 2.5/30/18 100 2136 026

TC 11×x22 White 2.5/35/20 50 2137 014

TC 6×9 White 1.6/25/17 100 2121 010

TCD 5×8 White 2.5/25/18 100 2141 018Grey 2.5/25/18 100 2141 026

TCD 6×10 White 2.5/25/18 100 2146 017Grey 2.5/25/18 100 2146 025

TDC 4×6 Clear 1.2/20/14 500 2111 540

Round clip with nail of acid resistant steel

Flat clip with nail of hardened and electroplated steel

Flat clip with nail of acid resistant steel

Flat clip with nail of hardened and electroplated steel for installation of two flat cables

P79

658

P79

670

P79

666

P79

657

P81

183

P80

833

Cabling material ClipsTC-C3 and -C4

P81

287

Basic Data

Description TC-C3 and -C4 are a wide range of clips in vari-ous dimensions, colours and with SECOR® clas-sification nails, corrosivity category C3 and C4.The clips are intended for the installation ofround and flat cables.

Suitable forRound cables 3–26 mm in wood, hard fibre-board, concrete, plasterboard, etc. Clip plug TCPmust be used in single plasterboard, concreteand lightweight concrete.

Material Clip: Impact resistant, UV-stabilized polypropy-lene (PP).Nail: TC-C3 is made of hardened and Fe/Znelectroplated steel with Thorsman SECOR® cor-rosion protection, corrosivity category C3.TC-C4 is made of acid-proof stainless steel acc.to SS 14 23 43, corrosivity category C4.

Temperature rangeInstallation: -20 to +50 °C.in operation: -40 to +80 °C.

Advantages• Wide range of clips in several colours• Safety nail bends before breaking• Nails available in electroplated steel with

Thorsman SECOR® corrosion protection or in stainless steel

• Can withstand high impact together with extremes of heat, cold and acid, multi-range ofcable size per clips

• Flexible design – for use with various size of cable

• Colour coded label on the packaging

Standards and regulations• Building regulations issued by National Board

of Housing, Building and Planning (BBR).• Thorsman SECOR™ corrosion protection:

SS-EN ISO 12944-2.

Certificates• SITAC Technical Approval of Thorsman

SECOR® corrosion protection, No. 0035/04.• SITAC Technical Approval of Thorsman

SECOR® corrosion protection, No. 0007/03.


Mounting Instruction

Wood and compressed board: Nail in.

Concrete, low density materials, brick, etc: UseTCP clip plugs. Hammer the clip plug into light-weight concrete without predrilling. Not for thicknails.

Plasterboard: Use TCP clip plugs. Make a holein single plasterboard sheets with an awl. Thestart of a hole is sufficient in double plasterboardsheets.

P76

882

P76

886

P76

883

Range

Type Colour Dimension Qty/Pack Art. No. Ø/A/Bmm

TC-C3 3-5 White 1.2/20/15 100 2230 008

TC-C3 5-7 White 1.2/20/12 100 2230 025Black 1.2/20/12 100 2230 030

TC-C3 7-10 White 1.6/25/16 100 2230 045Black 1.6/25/16 100 2230 050

TC-C3 8-12 White 2.0/30/19 100 2230 065

TC-C3 10-14 White 2.0/30/17 100 2230 085Black 2.0/30/17 100 2230 090

TC-C3 14-20 White 2.0/35/18 100 2230 105Black 2.0/45/28 100 2230 115

TC-C3 18-22 White 2.5/45/25 50 2230 130Black 2.5/45/25 50 2230 145

TC-C3 22-26 White 2.5/45/21 50 2230 160Black 2.5/45/21 50 2230 175

TC-C3 9/18 White 2.0/30/18 100 2231 020

TC-C4 5-7 Black 1.2/20/12 100 2240 030

TC-C4 7-10 White 1.6/25/16 100 2240 045Black 1.6/25/16 100 2240 050

TC-C4 8-12 White 2.0/30/19 100 2240 065

TC-C4 10-14 White 2.0/30/17 100 2240 085Black 2.0/30/17 100 2240 090

TC-C4 14-20 White 2.0/35/18 100 2240 105Black 2.0/35/18 100 2240 115

TC-C4 18-22 Grey 2.5/45/25 50 2240 150

TC-C4 22-26 Grey 2.5/45/21 50 2240 180

Cabling material ClipsTC-C3 and -C4

Clip with nail of Fe/Zn electroplated steel, corrosivity class C3

Clip with nail of acid-proof stainless steel, corrosivity class C4

P79

656

P79

661

Cabling material ClipTCS-C3

P81

288

Basic Data

Description Plastic clip with pre-mounted screw, intended forindoor or outdoor mounting. For round cables.Corrosivity category C3.

Suitable forCan be fitted without drilling in double plaster-board, wood, board materials and lightweightconcrete with high density. Also suitable for hardmaterials like concrete or bricks, in combinationwith or without wall plug TP.

Material Clip: Impact resistant, UV-stabilized polypropy-lene (PP).Screw: Hardened and zinc/iron electroplatedsteel with Thorsman SECOR®. Corrosivity cate-gory C3.

Temperature rangeInstallation: -20 to +50 °C.In operation: -40 to +80 °C.

Advantages• Screw with high pitch and cross-slotted head

(Phillips) for quick and secure tightening withthe use of an electric screwdriver.

• Direct fixing in suitable materials without theuse of wall plugs will save plug costs and time. No need for plugs in concrete!

• Excellent function when fixing cables on plas-terboard with an underlying sheet steel frame.

• The screw will ensure an excellent fixing inmaterials suitable for screw fixing. This is anadvantage when fixing rigid, stout cables thatneed to be strongly bent in for instance exter-nal corners.

• To use an electric screwdriver to tighten ascrew instead of hammering in a nail can, insome cases, be more convenient.

• With the adjusted screw length, sizes 14-18, 18-22 and 22-26 allow mounting on the inside of double plasterboard, without the screw pro-truding on the other side of the wall.

Standards and regulations• Building regulations issued by National Board

of Housing, Building and Planning (BBR).• Thorsman SECOR® corrosion protection:

SS-EN ISO 12944-2.

Certificates• SITAC Technical Approval of Thorsman

SECOR® corrosion protection, No. 0035/04.• SITAC Technical Approval of Thorsman

SECOR® corrosion protection, No. 0007/03.


Application examples

Mounting in single 13 mm plasterboard. Useplastic plug TP1 yellow.

Mounting in double 13 mm plasterboard. Thelength of the screw of TCS 14-18, 18-22 and 22-26 is adjusted so as not to pass through bothboards, in order to facilitate the mounting of con-duits from the inside of the wall.

Mounting in a single 13 mm plasterboard with ametal bar behind, metal thickness 0.56 mm.

Mounting in wood, wood board materials, ply-wood.

Mounting in concrete and bricks. Drill a Ø 4 mmhole, approx. 30 mm deep. Drive the screwdirect in the drilled hole.

Mounting in lightweight concreate. Use plasticplug TP1 yellow. In lightweight concrete of higherdensity than 600, no pre-drilling or plugs areneeded.

P73

446

P73

447

P73

448

P73

449

P73

450

P73

451

Cabling material ClipsTCS-C3

Range

Type Colour Dimension Qty/Pack Art. No. Ø/A/Bmm

TCS-C3 7-10 White 5.0/32/23 100 2190 001Light grey 5.0/32/23 100 2190 003Grey 5.0/32/23 100 2190 004

TCS-C3 10-14 White 5.0/38/26 100 2190 021Black 5.0/38/26 100 2190 022Light grey 5.0/38/26 100 2190 023Grey 5.0/38/26 100 2190 024




P79

660

TK 3–5 White 6 TP 0, 1, 2 TPS 4 100 2300 010TK 5–7 White 6 TP 0, 1, 2 TPS 4 100 2301 018TK 7–10 White 6 TP 0, 1, 2 TPS 4 100 2302 016TK 7–10 Grey 6 TP 0, 1, 2 TPS 4 100 2302 024TK 10–14 White 6–8 TP 0, 1, 2 TPS 4 100 2303 014TK 10–14 Grey 6–8 TP 0, 1, 2 TPS 4 100 2303 022TK 14–20 White 8–10 TP 0, 1, 2 TPS 5 100 2304 012TK 14–20 Grey 8–10 TP 0, 1, 2 TPS 5 100 2304 020TK 20–26 White 8–10 TP 0, 1, 2 TPS 5 50 2305 019TK 20–26 Grey 8–10 TP 0, 1, 2 TPS 5 50 2305 027

TK 6×9 White 6 TP 0, 1, 2 TPS 4 100 2310 100

Cabling material ClampTK

P60

821

P10

49

Basic Data

DescriptionPlastic clamp for round cables.Suitable for

Installation of round cables. Installation in woodis done by using wood screws. For installation inconcrete, brick, plasterboard etc. use TP plugsand TGS wood screws or TPS nail plugs.

Advantages• Flexible – each size can be used for several

cable sizes.• Can withstand high impact, together with

extremes of heat, cold and acid.• Broad range.• Can be fixed with TPS nail plug or wood

screw.

Material Impact resistant polypropylene (PP).

Temperature Range-40 to +80 °C.


Range

Type Colour Required Suitable plug Qty/Pack Art. No.Cable Ø screw No.mm Plug Nail plug

Application

Wood and compressed board: Use TGS woodscrews.

Concrete, low density material concrete, brick,etc.: Use TP plugs and wood screws, or TPSnail plugs.

Plasterboard: Use TP plugs and wood screws orTPS nail plugs.

M10

720

M10

690

M10

730

TSK 7–10 White 2–5 6 TP 0, 1, 2 TPS 4 100 2330 017TSK 7–10 Grey 2–5 6 TP 0, 1, 2 TPS 4 100 2330 025TSK 10–14 White 2–5 6–8 TP 0, 1, 2 TPS 5 50 2332 013TSK 10–14 Grey 2–5 6–8 TP 0, 1, 2 TPS 5 50 2332 021TSK 14–20 White 2–5 8–10 TP 0, 1, 2 TPS 5 50 2334 019TSK 14–20 Grey 2–5 8–10 TP 0, 1, 2 TPS 5 50 2334 027

PFSK 10–14 2/30 White 2–5 – TCP 0 – 50 2333 433

Cabling material Adjustable ClampsTSK, PFSK

P80

831

P80

832

P10

48

Basic Data

DescriptionAdjustable clamp in plastic.

Suitable forInstallation of 2–5 parallel cables. Installation inwood is done by using wood screws. For instal-lation in concrete, brick plasterboard etc. use TPplugs and TGS wood screws or TPS nail plugs.

Advantages• Flexible – each size can be used for several

cable sizes.• One clamp can take 2–5 parallel cables.• Quick and easy to install.• Can withstand high impact, together with

extremes of heat, cold and acid.• Can be fixed with TPS nail plug or screw.

Material TSK: PP (polypropylene).PFSK: PA (polyamide).Nail: Hardened zinc plated steel

Temperature Range- 40 to +80 °C.

PackagingCardboard carton with mounting instruction.

Range

Type Colour No. of Required Suitable plug Qty/Pack Art. No.Cable Ø cables screw No.mm Plug Nail plug

Application

First secure the small brack-et end with a TPS nail plugor a wood screw. Whensecuring horizontal cableson a wall, the bracket mustbe firmly against the bottomcable.

After the bracket has beenfixed, slide in the tongue ofthe clamp until the cablesare correctly located. Securewith a TPS nail plug or ascrew and cut off any sur-plus length of tongue.

M10

700

M10

710

Adjustable clamp for screw mounting

Adjustable clamp for nail mounting, incl. nail

Installation suggestionsUse TP screw plugs and wood screws TGS ornail plug TPS-4 or 5 for installation in concrete,low density material and plasterboard.

Cabling material ClampKLEMMI™, TKK/APK

P43

94

Basic Data

Description Clamps for the mounting of round and flat elec-tric cables. Excellent when there are particularaesthetic requirements for the laying of cables inconjunction with overpainting, wallpapering, car-pentry and so on.

Suitable forIndoor and outdoor installations of electriccables. Installation in wood and wood fibreboards. In other materials, e.g. plasterboard,concrete, low density concrete and brick – useTKK with TCP plug.

Advantages• Excellent outdoor durability thanks to very

good resistance to heat and sunlight.• Good resistance to corrosion and mechanical

influence.• Flexible, thin material, powdercoated in the

colour of the cable, giving a very neat installa-tion without projecting parts.

• Universal tools that fits all TKK sizes, simplify-ing installation.

Material Clamps: Strap of steel SIS 1151 Z200, electro-plated (Fe/Zn 10). Surface powder coated withpolyester varnish, layer thickness 120–160 µm.Colour white NCS 0502-Y.Nail/screw of steel SIS 1151 Z275, electro-plat-ed (Fe/Zn 7).

Temperature range-40 to +250 °C.


Application

Install by hand with nailingtool TKK-Y or -E or withmounting tools TKK-S, -N, -MD or -NT.

Concrete, lightweight, brick,etc.: use APK plug. In lowdensity concrete, drive APKplug in without pilot drilling.

Plasterboard: use APK plug.In single board, make a holewith an awl. In double plas-terboard sheets it is suffi-cient to start a hole.

M28

510

M13

490

M13

500

Range

Type Dimensions Qty/Pack Art. No.

A/B Nail Ø××Lmm mm

Cabling material ClampKLEMMI™, TKK/APK

TKK/APK 4-6 6/7 1.6x18 100 2366 102TKK/APK 4-6 6/7 1.6x13 100 2366 150

TKK/APK 5-7 7.5/7 1.6x18 100 2366 209TKK/APK 5-7 7.5/7 1.6x25 100 2366 230

TKK/APK 7-10 10/8 2.1x18 100 2367 019TKK/APK 7-10 10/8 2.1x25 100 2369 015TKK/APK 7-10 10/8 2.7x25 screw 100 2375 012TKK/APK 7-10 10/8 2.1x40 100 2369 020

TKK/APK 8-12 11/9 2.1x18 100 2369 200TKK/APK 8-12 11/9 2.1x25 100 2369 231TKK/APK 8-12 11/9 2.1x40 100 2369 262TKK/APK 8-12 11/9 2.7x25 screw 100 2369 310

TKK/APK 10-14 13/10 2.1x25 100 2371 011TKK/APK 10-14 13/10 2.7x25 screw 100 2377 018TKK/APK 10-14 13/10 2.1x40 50 2371 013

TKK/APK 14-20 17/12 2.1x25 50 2373 017TKK/APK 14-20 17/12 2.7x25 screw 50 2379 014TKK/APK 14-20 17/12 2.1x40 50 2373 020

TKK/APK 6x9 9/8 2.1x18 100 2380 004TKK/APK 6x9 9/8 2.1x25 100 2380 053TKK/APK 6x9 9/8 2.7x25 screw 100 2380 110

TKK/APK 6x12 10/10 2.1x25 100 2380 152

Clamps

P60

822

TKK-N All dimensions Blue 30/27/135 1 2360 030

TKK-S 7-10, 8-12, 10-14, 14-20 Black 30/27/135 1 2360 018

TKK-MD All dimensions Blue 68/30/165 1 2360 035

TKK-NT Heads TKK-SH1-4 Blue 28/–/135 1 2360 025

Range

Type Suitable for clamps Colour Dimensions Qty/Pack Art. No. TKK/APK A/B/C

mm

Cabling material Mounting toolsTKK/APK

Mounting tool kit incl. handle and exchangeable heads

Mounting tool without head

Basic Data

Description TKK-N, -S and -MD: Mounting tool kit includinghandle and exchangeable heads.TKK-N and -MD include three exchangeableheads, whereas TKK-S includes one head. Thehead of TKK-MD can be angled to the handle.TKK-NT and -E are supplied without exchange-able mounting heads.

Suitable forTo nail TKK/APK clamps.

Material TKK-Y: handle of black PA6 (polyamide) with 30 % glass fibre, pincers of black acetaldehyderesin (POM), impact mandrel of hardened steeland nut of electro-plated brass.TKK-E: PA6 (polyamide).TKK-N, -MD, -NT and -S: handle of PA, glass-fibre reinforced, head of die-cast zinc, mandrels,springs and sleeves of steel.

Advantages• Ergonomic handle TKK-MD

PackagingTKK-N, -S, NT, -SH: plastic bag.TKK-MD, -Y, -E: carton.

P80

864

P60

825

P80

850

P80

855

P80

851

Range

Type Suitable for clamps Colour Dimensions Qty/Pack Art. No. TKK/APK A/B/C

mm

TKK-SH1 4–6 – 14/10/50 1 2360 040

TKK-SH2 7–10 and 6×9 – 16/13/52 1 2360 041

TKK-SH3 10–14 and 6×12 – 18/15/52 1 2360 042

TKK-SH4 5–7, 8–12 and 14–20 – 20/16/52 1 2360 043

TKK-Y All dimensions Black Ø28/–/140 1 2360 009

TKK-E 7–10, 10–14 and 6×9 Red 12/13/66 1 000 2360 020

Exchangeable heads for TKK mounting tools TKK-N, -NT and -MD

Nailing tools

Cabling material Mounting toolsTKK/APK

P80

846

P80

854

P80

853

P80

852

P80

849

P80

847

Cabling material ClampTKS

P63

470

Basic Data

Description Stainless steel clamp, single or double with ovalor round screw holes.Stainless screw with large thin head, Phillipscross recess. Twin thread.

Suitable forInstallation of one or two parallel pipes orcables. Suitable for outdoor installations. TKS-MR suitable in marine applications.

Advantages• Stainless steel for outdoor use• Broad range

Material Stainless steel SIS 2333.

Temperature range-40 to +250 °C.


Range Type Dimension Qty/Pack Art. No. Pipe/cable A/B/C Ø mm mm

TKS-ER 16 16/47/15 100 2390 400TKS-ER 20 20/58/15 100 2390 405TKS-ER 22 22/58/15 100 2390 410TKS-ER 25 25/64/15 100 2390 415TKS-ER 30 30/69/15 100 2390 420TKS-ER 32 32/73/15 50 2390 425TKS-ER 40 40/76/15 50 2390 430TKS-ER 50 50/85/15 50 2390 435

TKS-DR 10 10/51/15 100 2390 475TKS-DR 12 12/53/15 100 2390 480TKS-DR 16 16/64/15 100 2390 485TKS-DR 20 20/71/15 100 2390 490

TKS-KR 8 8/25/12 100 2390 500TKS-KR 9 9/26/12 100 2390 505TKS-KR 10 10/26/15 100 2390 510TKS-KR 11 11/28/15 100 2390 515TKS-KR 12 12/30/15 100 2390 520TKS-KR 14 14/31/15 100 2390 525TKS-KR 16 16/34/15 100 2390 530TKS-KR 18 18/36/15 100 2390 535TKS-KR 20 20/39/15 100 2390 540

TKS-KR 6×9 6/26/15 100 2390 545TKS-KR 6×10 6/22/15 100 2390 550

Single clamp with two oval 8××5 mm screw holes

Double clamp with two oval 8××5 mm screw holes

Single clamp with one oval 4.5××7 mm screw hole

P63

469

P63

468

P63

466

Range, cont’d Type Dimension Qty/Pack Art. No. Pipe/cable A/B/C Ø mm mm

Cabling material ClampTKS

TKS-MR 6 6/23/15 100 2390 595TKS-MR 7 7/23/15 100 2390 600TKS-MR 8 8/25/12 100 2390 605TKS-MR 9 9/25/12 100 2390 610TKS-MR 10 10/27/15 100 2390 615TKS-MR 11 11/28/15 100 2390 620TKS-MR 12 12/29/15 100 2390 625TKS-MR 13 13/30/15 100 2390 630TKS-MR 14 14/31/15 100 2390 635TKS-MR 16 16/33/15 100 2390 640TKS-MR 18 18/36/15 100 2390 645TKS-MR 20 20/38/15 100 2390 650TKS-MR 22 22/39/15 100 2390 655TKS-MR 24 24/44/20 100 2390 660

TSC-R25 4.2×25 100 3782 100

Single clamp with one Ø 7 mm screw hole. Suitable in marine applications

Installation screw

P63

465

P63

467

Cabling material Cable ties/Cable tie plugTCT/CSL

P10

51

Basic Data

Description The cable ties are self-locking. They cannot beopened and re-sealed. One variant is providedwith mounting head with screw eyelet.

Suitable forBundling and securing cables, pipes, hoses etc.

AdvantagesTCT:

• Self-locking• Locking mechanism made of insulating

material• Eyelet for screw fixing (TCT-MH)• Two colours• Wide range

CSL:• Cable tie and plug in one piece• Bundle size 6-25 mm diameter• Can be opened

Material TCT natural: PA (polyamide) 6.6TCT black and CSL: PA (polyamide) 6.6, UV-stabilised.

Temperature rangeFrom -35 °C to +85 °C.

ApprovalsUL recognition:File E-86244 (M)/Mil-S-23190EE70062E41938 (M) (A Card)

R.I.Na. (Registro Italiano Navale):Approval No. 5/043/93

PackagingPlastic bag.

P12

56

Type TCT

Type TCT-MH

Type CSL

A10

210

A10

200

A10

220

TCT-100×2.5 Natural 2/20 81 100 2400 026TCT-100×2.5 Black 2/20 81 100 2400 033













Range

Type Colour Screw hole Dimensions Cable tie Qty/Pack Art. No. Ø mm A/B/C max

mm mm

Cabling material Cable ties/Cable tie plugTCT/CSL

Range

Type Colour Bundle Ø Tensile Qty/Pack Art. No. Dimensions A××B min/max strength

N

Cable ties in two colours. Natural indoors, black outdoors

Cable tie with screw eyelet

Range

Type Colour Bundle Ø Eylet Tensile Qty/Pack Art. No. Dimensions A××B min/max Ø C mm strength

N

TCT-MH 150×3.6 Natural 2/32 4.5 180 100 2400 521TCT-MH 200×4.8 Natural 2/50 5.5 220 100 2400 569TCT-MH 370×7.6 Natural 5/102 6.5 540 100 2400 668

TCT-MPNY 750 Natural 3.6 5.5/19/19 3.6 100 2402 100TCT-MPNY 1000 Natural 5.6 6.6/28/28 4.8 100 2402 150

Cable tie fixing with self-adhesive tape or screw fixing

Range

Type Colour Dimensions Qty/Pack Art. No. A1/A2/B/Cmm

CSL-7×90 Black 115/90/7/32 200 2410 010

P77

795

P80

856

P80

857

P80

862

Cable glands Grommet TET

Press the grommet into the hole.

Puncture the diaphragm using a cross-headscrewdriver or the wires from which the outersheath has been removed. Pass the cable orpipe through the hole in the seal.

Pull the cable/pipe back slightly to seal the entry.Fitting is complete.

M10

880

M10

890

M10

900

P18

49

Basic Data

DescriptionGrommets available in two different materials,EPDM and CR.

Suitable forUntapped holes of material from 0.5 to 4 mmthickness. For completely dust and watertightcable and pipe inlets.

Advantages• Fast installation – seals without tightening• Permits vibration in cables and pipes without

detracting from the seal• The sealing diaphragm is punctured only

when the cable is drawn through – acts as a blind plug and is ready for installation

• Approved for installation in ships• Each size has a very wide sealing range• High degree of protection – IP67

Material TET: EPDM (ethylene-propylene) greyTET C: CR (chloroprene) blackMaterial properties – see table.

ApprovalsApproved by Lloyds Register of Shipping andDet Norske Veritas for marine and offshore useand the Swedish, Norwegian, Danish andFinnish national approval boards for watertightpenetration.

Degree of protectionIP67 in accordance with IEC.

Temperature RangeSee table.


ApplicationL1

9460

Range

Type Dimensions Material Hole1) Qty/Pack Art. No.Ø/B thickness Ø mmmm mm


TET 3-5 20/13 0.5–3.0 12.52) 50 3258 206TET 5-7 21/18 1–4 16 50 3265 022TET 7-10 24/20 1–4 19 50 3260 007TET 10-14 28/22 1–4 23 50 3261 005TET 14-20 35/25 1–4 29 50 3262 003TET 20-26 46/30 1–4 38 25 3263 027TET 26-35 58/35 1–4 48 25 3264 025

TET M7-10 25/20 1–4 M20 50 3256 257TET M10-14 29/22 1–4 M25 50 3256 267TET M14-20 37.5/25 1–4 M32 50 3256 277TET M20-26 48/30 1–4 M40 25 3256 297TET M26-35 60/35 1–4 M50 25 3256 287

TET 3-5C 20/13 0.5–3.0 12.52) 50 3258 244TET 5-7C 21/18 1–4 16 50 3265 048TET 7-10C 24/20 1–4 19 50 3260 049TET 10-14C 28/22 1–4 23 50 3261 047TET 14-20C 35/25 1–4 29 50 3262 045TET 20-26C 46/30 1–4 38 25 3263 043TET 26-35C 58/35 1–4 48 25 3264 041

TET M7-10C 25/20 1–4 M20 50 3256 255TET M10-14C 29/22 1–4 M25 50 3256 265TET M14-20C 37.5/25 1–4 M32 50 3256 275TET M20-26C 48/30 1–4 M40 25 3256 295TET M26-35C 60/35 1–4 M50 25 3256 285

1) Tolerance if material thickness is more than 2 mm = +1, –0 mmTolerance if material thickness is less than 2 mm = ±1 mm

2) Tolerance ±0.5 mm

EPDM with Pr hole dimensions, grey

EPDM with metric hole dimensions, grey

CR with Pr hole dimensions, black

CR with metric hole dimensions, black

P60

849

P60

848

P60

848

P60

849


Material properties

TET TET-C

Material EPDM CREthylene/propylene rubber Chloroprene rubber

Colour Grey Black

Halogen content No Yes

Density 1.35 g/cm3 1.38 g/cm3

Weather resistance Weather and temperature resistant. Weather and temperature resistant.Can be used both indoors and outdoors. Can be used both indoors and outdoors.

Temperature For continuous use between For continuous use betweenresistance –40 °C and +100 °C (cf. natural –25 °C and +95 °C. Slightly

rubber +70 °C). Slightly higher higher temperature for shorttemperature for short periods periods.(+130 °C for about one hour).

Thermal aging After 72 hours at +100 °C. After 72 hours at +100 °C.Change in properties: Change in properties:Hardness +5° SH (+11 %) Hardness +6° SH (+10 %)Breaking point –18 % Breaking point –8 %Elongation at break –26 % Elongation at break –16 %

After 72 hours at +125 °C.Change in properties:Hardness +13° SH (+13 %)Breaking point –12 %Elongation at break –35 %

Fire properties Non self-extinguishing Self-extinguishing.Combustion rate 2 cm/min approx. Tested to IEC standard. Approved for

installation in ships in accordance withIEC Publ. No. 92-1 (1964). Electricalinstallations in ships, Part 1 Generalrequirements.

Chemical resistance Normally resistant to: Normally resistant to:at –20 °C • Detergents • Aliphatic hydrocarbons

• Strongly oxidizing chemicals such as: • Alkalis• Ammonia • Alcohols• Dilute phosphoric acid • Dilute acids • Dilute chromic acid • Dilute nitric acid Slightly affected by:• Dilute hydrochloric acid • Acetone• Dilute sulphuric acid • Ammonia

• Others, e.g.: • Freon• Developer • Glycol• Glycol • Sodium hydroxide• Cooling fluid (emulsion)

Slightly affected by:• Concentrated acids at room temperature

Oil resistance Not resistant to mineral oils, but Good resistance to mineral oils. Thewithstands minor splashing such effect of other petroleum products, suchas that occurring in engine com- as solvents, lubricating grease and wax,partments of vehicles, etc. is insignificant. Should not be used

in direct contact with petrol (gasoline).

Being based on laboratory tests, all information should be regarded for guidance only. Temperature, duration of exposure,concentrations, etc., severely affect the properties.

Cable seals Cable gland TCG

Tighten the cable gland in the hole.

Puncture the diaphragm with a crossheadscrewdriver.

Twist the conductors together. Insert the cable orthe pipe.

Tighten the upper part of the gland to achievestrain relief and double sealing function. Fortorque, see “Technical data”.

M12

125

M12

125

M12

125

P41

36

Basic Data

DescriptionCable gland with strain relief. With external met-ric or Pr threads.Locknut with internal metric or Pr threads to beused together with cable glands in untappedholes.

Suitable forSealing and providing strain relief for cables inswitches, devices, machines, etc. Used inthreaded holes and unthreaded holes, in thelatter case together with a locknut.

Advantages• High degree of protection IP67• Double sealing function, ensuring the IP67

rating and providing a safe function• Strain relief and seals without tools• Very quickly fitted• Easily accessible, even in tight corners• Each size has a very wide sealing range –

rational, economic installation and stocking• Sealing diaphragm is not perforated until the

cable is pulled through it – use as a blind plug• Halogen-free• Suitable for outdoor use

Material Housing, nut: PA, glass-fibre reinforced.Seal: Thermoplastic elastomer SEBS.

Material propertiesNormally resistant to:• Alkalies• Alcohols• Cleaning agents• Salt solutions• Grease and waxSlightly affected by:• Aliphatic oilsNot to be used in direct contact with:• Aromatic solvents• Chlorinated hydrocarbons

ApprovalsAccording to EN 50262, Metric cable glands forelectrical installations. Impact category 3. Cableanchorage type A.SEMKO, the Swedish Electrical Board forTesting and Approval of Electrical Equipment.

StandardsEN 60529, EN 50262, EN 60695-2-1/1.

Degree of protectionIP67 (TCG-PR 37 = IP54) in accordance withIEC.

Fire resistanceTested according to Glow wire test EN 60695-2-1/1 at 650 °C.

Application

L194

80

M12

125

Temperature Range-20 °C to +65 °C

PackagingCardboard carton.Technical dataTCG size TorqueM16, PR 15.2 1–2 NmM20, PR 18.6, PR 22.5 1.5–3 NmM25, PR 28.3 3–5 Nm

Range

Type Colour Cable Dimensions Qty/Pack Art. No.range A/B/C

mm

TCG-M16 Grey 5–10 30/23/9 20 3270 000TCG-M20 Grey 7.5–14 32/29/9.5 20 3270 010TCG-M25 Grey 13.5–19 35/35/11 20 3270 020

TCG-PR 15.2 Grey 5–10 30/23/9 20 3270 220TCG-PR 18.6 Grey 7.5–14 32/29/9.5 20 3270 230TCG-PR 22.5 Grey 7.5–14 32/29/9.5 20 3270 240TCG-PR 28.3 Grey 13.5–19 35/35/11 20 3270 250TCG-PR 37 Grey 15–25 53/43/11 10 3270 253

TFM M16 Grey — — 50 3272 015TFM M20 Grey — — 50 3272 061TFM M25 Grey — — 50 3272 160

TFM 15.2 Grey — — 50 3272 002TFM 18.6 Grey — — 50 3272 051TFM 22.5 Grey — — 50 3272 150TFM 28.3 Grey — — 50 3272 200TFM 37.0 Grey — — 25 3272 259

Cable gland with metric threads

Cable gland with Pr threads

Locknut with metric threads

Locknut with Pr threads

Cable seals Cable gland TCG

P60

505

P60

505

P60

826

P60

826

Range

Type Colour Qty/Pack Art. No.

Capacity

Type Conductor No. ofarea (mm2) conductors

Torix T6 Red 100 3000 210

Torix T16 Green 50 3000 150

Torix T6 0.51) 2–100.75 2–101.0 2–101.5 2–82.5 2–54.0 2–36.0 2

Total area 12.5

Torix T16 1.5 2–102.5 2–64.0 2–46.0 2

Total area 16.01) Not for 2×0.5 mm2 RK

Termination material Twist wire connectors TORIX™, T6/T16

P48

04

M19

650

P10

27

Basic Data

DescriptionTorix T6 and T16, twist wire connectors to con-nect all kinds and combinations of wires.At the top of the connectors there is a test hole.A connection can be quickly and easily testedwith ordinary testing instruments.

Suitable forTorix T6 and T16 are approved for connection ofall kinds of wires from 0.5 mm2 to 12.5 mm2 (T6)and from 1.0 mm2 to 16.0 mm2 (T16).

Advantages• Test hole in top for quick, easy voltage testing.• Hexagon spanner flats for power screwdrivers

with 1/4” fitting.• Ergonomically-shaped wings.• No need to twist the stripped wires.• Can be screwed off and re-used on the same

or a larger wire area.• One product for all connections.

Material PA (Polyamide).

ApprovalsFor 440 V to IEC standard 685-2-4.Torix T6 and T16 are approved by SEMKO,NEMKO, DEMKO, FIMKO (the Swedish,Norwegian, Danish and Finnish Electrical Boardfor Testing and Approval of Electrical Equipmentand Certif.).Torix T16 is approved by UL and CSA.Torix T6 is approved for wire area 0.5 to 12.5 mm2.Torix T16 is approved for wire area 1.0 to 16.0 mm2.


Fitting

Range

Type Colour Dimensions Qty/Pack Art. No.A/B/Cmm

TED-KP 18 Red 25/20/55 5 3504 013

Termination material Terminal connectorTED-KP18

P81

304

P80

829

Basic Data

DescriptionTED-KP-18 is a screw terminal block with sixoval connection openings for a total wire area of18 mm2 per connection. Because the openingsare offset relative to each other, the wires canbe connected without risk of short circuits.

Suitable forTED-KP-8 is suitable for all surface mountedjunction boxes except TED-001.

Advantages• Screw clamps with entries from two directions.• One clamp marked earth, others numbered

1 to 5.• T-connection possible with three-wire circuit.• Minimal short-circuit risk with offset conductor

openings.

Material PA (Polyamide).

ApprovalsFor 440 V to IEC standard 685-2-4.TED-KP18 is approved by SEMKO, NEMKO,DEMKO and FIMKO (the Swedish, Norwegian,Danish and Finnish Electrical Board for Testingand Approval of Electrical Equipment).


Screw terminal block

As standards, specifications and designs change from time totime, please ask for confirmation of the information given inthis publication.Design: Schneider ElectricPhoto: Schneider ElectricPrinted:

Schneider Electric

Postal addressAddress CountryPhoneFaxwww.schneider-electric.com U

TX

XX

XIN

T ©

Sch

neid

er E

lect

ric,

2005

.

month 200X

Fixing Material - ESELO

Documents

Transcript of Fixing Material - ESELO