Workspaces and Walkways Are Checked to Ensure No Slip
-
Upload
hazmi-hanif -
Category
Documents
-
view
218 -
download
2
description
Transcript of Workspaces and Walkways Are Checked to Ensure No Slip
PRE-OPERATIONAL SAFETY CHECKS
1. Workspaces and walkways are checked to ensure no slip/trip are present.2. All guards and safety shields are ensured are in position before starting the grinder.3. The wheels are ensured that do not touch the work rest and that the gap between wheel
and rest is no greater than 1.5mm.4. The wheels are checked running true and are not glazed or loaded.5. The operation of the ON/OFF starter is located and ensured you are familiar with.6. faulty equipment Must not be use. Any suspect machinery is reported immediately.
OPERATIONAL SAFETY CHECKSFirstly, stand to the side of the wheels when starting up.
Secondly,let the wheels gain maximum speed before starting to grind.
Thirdly, Do not grind on the side of the wheel.
Fourthly, small objects must not be held by hand.
Fifthly, never leave the machine running unattended.
Sixthly, do not bend down near the machine whilst it is running.
Seventhly, never force the workpiece against a wheel.
Eighthly, slowly move the workpiece across the face of the wheel in a uniform manner.
Nintethly, Coolant spilt on the floor should be immediately absorbed.
Hierarchical step
FLOW CHART
BENCH GRINDER MACHINE
Ensure area around grinder is clean and
well maintained
Check abrasive wheel for cracks or
flaws
Put the wheel into flange of grinder
machine
Adjust tongue guard Close the eye shield
Switch on the bench Grinder machine
Allow grinder to reach full rpm
before grinding
Position yourself to avoid
overbalancing
Grinding ( do not grind soft
metal)
Done grinding
Switch off
Clean area and dispose of grinder particles
DONE
PRE-OPERATIONAL SAFETY CHECKS
GRAPHIC
OPERATIONAL SAFETY CHECKS