Workshop - mchc.ie
Transcript of Workshop - mchc.ie
McHugh Components
89 Broomhill Road
Tallaght Industrial Estate
Tallaght
Dublin 24
Ireland
Telephone: (01) 413 7000
Telefax: (01) 414 5370
Email: [email protected]
Website: www.mchc.ie
C O M P O N E N T SC O M P O N E N T Swww.mchc.ie
Workshop2007
Greasing Equipment Foot Operated Grease Gun / G Coupler
2www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
High Pressure Foot Operated Grease Gunwith 2m delivery hose and 'G Coupler' Grease CouplingSupplied with grease scooper for mess free loading
• Delivery rate: 2.7ml per stroke• Delivery pressure: 10,000psi (650 bar)• Grease capacity: 8 Kg Bulk fi ll• Delivery hose: 2 metre x 1/4" 2 Wire• Coupler thread: 1/8" female• Pump mechanism: 2 Stage self priming with pressure return valve
DESCRIPTION PART NUMBERFoot operated grease gun GGUN
GURTECH
'G Coupler' Display Stand• Steel display unit with hanging hooks• Test grease nipple and fl exible hose with 'G Coupler' attached to standNote: Hang packs are not supplied with display stand and must be ordered separately
DESCRIPTION PART NUMBERDisplay stand for G Coupler GCSTAND
Activate trigger to engage / disengage. Can easily be done with one hand
Greasing at 10,000psi with no hands needed to align coupler and
no leaking grease.
'G Coupler' Grease Coupler• Max Pressure:10,000psi (690 Bar)• Coupler Thread: 1/8" BSP or M10x1• Grease Gun Compatibility: Pneumatic, Manual and Electric• Seal: Durable nitrile rubber seal for longevity under high pressure• Lock-on Mechanism: Four hardened spring steel jaws
DESCRIPTION THREAD PART NUMBER'G Coupler ' grease coupler 1/8" BSP GC18'G Coupler ' grease coupler M10x1 GC10REPLACEMENT PARTS TO SUIT PART NUMBERSteel jaw repair kit GCRP
GURTECH
'G Coupler' Grease Coupler - Long Series• Ideal for PTO Shaft greasing application
DESCRIPTION THREAD PART NUMBER'G Coupler ' long series coupler 1/8" BSP GC18L'G Coupler ' long series coupler M10x1 GC10LREPLACEMENT PARTS TO SUIT PART NUMBERSteel jaw repair kit GCRP
Suppliedwith
grease scooper
Greasing Equipment Grease Guns
3www.mchc.ieCC O M P O N E NO M P O N E N T SC O M P O N E N T S
Lever Grease Gun (400g)• Suitable for 400g cartridges• Working pressure: 10000PSIAccessories Included• 300mm fl exi tube - 1/8" thread• 150mm rigid tube - 1/8" thread• 4 jaw grease coupler - 1/8" thread
DESCRIPTION PART NUMBERLever grease gun c/w accessories PGS400
Supplied Boxed
Telescopic Grease Gun (100ml)• Ideal for Chainsaws and small applicationsInstructions:• Expand shaft of gun• Remove rear cap and fi ll with grease• Replace cap to start greasing
DESCRIPTION PART NUMBERTelescopic grease gun FGP453219
Conversion Bush for 400g Spin-On Cartridge• For use with PGS500 grease gun
DESCRIPTION PART NUMBERConversion bush for 400g spin-on cartridge PGS500AD1
Push a small amount of grease out of the grease cartridge
Insert cartridge into gun and tighten Pump gun to prime and you are ready to grease
Two Handed Grease Gun (500g)• Suitable for 500g threaded grease cartridges• Working pressure: 12000PSIAccessories Included• 500mm fl exi tube - 1/8" thread• 150mm rigid tube - 1/8" thread• 4 jaw grease coupler - 1/8" thread• Conversion bush for 400g spin-on cartridgeFirst time priming instructions shown below
DESCRIPTION PART NUMBERTwo handed grease gun c/w accessories PGS500
Supplied Boxed
Greasing Equipment Grease Gun Accessories
4www.mchc.ieCC O M P O N E NO M P O N E N T SC O M P O N E N T S
Grease Gun TubesNo. DESCRIPTION PART NUMBER1 500mm fl exi tube (10mm) - 1/8" thread PGS5182 500mm fl exi tube (10mm) - M10x1 thread FP126653 300mm fl exi tube (10mm) - 1/8" thread PGS318104 150mm Rigid tube - 1/8" thread 12735
1
2 3
4
4 Jaw Grease CouplerDESCRIPTION PART NUMBER4 jaw grease coupler - 1/8" thread PGS4J4 jaw grease coupler - M10x1 thread FP12631
Bulk Filling NippleDESCRIPTION PART NUMBERFiller nipple with M10x1 thread 12670
90º Grease CouplerDESCRIPTION PART NUMBER90º grease coupler - M10x1 thread PGS90
Profi le
Greasing Equipment Spin-On Cartridge Grease Guns
5www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Lever Grease Gun400g Spin-On Cartridge TypeQuick and Easy, No-Mess Cartridge Changing• Lever grease gun for quick & effortless high pressure greasing• Designed to work with 400g spin-on grease cartridge• Spin-on cartridge works on vacuum technology that ensures full utilization of grease in the cartridge eliminating priming issues• No air pockets, hence no air bleeding required• Working pressure: 10000 PSIAccessories Included:• 300mm fl exi tube - 1/8" thread• 150mm rigid tube - 1/8" thread• 4 jaw grease coupler - 1/8" thread
DESCRIPTION PART NUMBERLever grease gun 400g spin-on cartridge type PGS600
SuppliedBoxed
400g Spin-On Cartridge System - Quick and Easy, No-Mess Cartridge Changing
1. Remove cap from cartridge and push the grease up a little
2. Simply insert cartridge into gun 3. Just screw the cartridge tight and you are ready to go
Pistol Grease Gun400g Spin-On Cartridge TypeQuick and Easy, No-Mess Cartridge Changing• Pistol grease gun for quick & effortless high pressure greasing• Designed to work with 400g spin-on grease cartridge• Spin-on cartridge works on vacuum technology that ensures full utilization of grease in the cartridge eliminating priming issues• No air pockets, hence no air bleeding required• Working pressure: 5000 PSIAccessories Included:• 300mm fl exi tube - 1/8" thread• 100mm rigid tube - 1/8" thread• 4 jaw grease coupler - 1/8" thread
DESCRIPTION PART NUMBERPistol grease gun 400g spin-on cartridge type PGS700
SuppliedBoxed
Greasing Equipment Spin-On Grease Cartridges
6www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Longlife High Temperature Grease NLGI No. 2A specially developed lithium complex grease for use in harsh agricultural, industrial and automotive environments. Exceptional mechanical stability greatly extends lubrication intervals.
• High Temperature (-20 to +150ºC)• Long Life• Excellent corrosion resistance for operating in wet conditions• Exceptional Anti-wear performance• Colour: Blue
DESCRIPTION PART NUMBER400g Longlife high temperature spin-on grease cartridge GC400LSHP2
Heavy Duty Graphite Grease NLGI No. 2Designed for heavy duty applications where adhesion, shock loading and good corrosion protection is needed. Ideal for use on bucket pins and bushes on earthmoving equipment.
• Temperature (-20 to +140ºC)• High level of lubrication solids substantially extends component life• Adhesion improver provides long lasting protection• Smooth appearance• Colour: Grey
DESCRIPTION PART NUMBER400g heavy duty graphite spin-on grease cartridge GC400LSPBL
Premium Quality Multipurpose Grease NLGI No. 2Highly versatile multipurpose lithium grease for use in all anti-friction and plain bearings subject to high load conditions. Used extensively throughout the agricultural, industrial and automotive sectors
• Temperature (-20 to +140ºC)• High degree of corrosion protection• Excellent anti-wear performance• Clean, clear smooth appearance• Colour: Light Brown
DESCRIPTION PART NUMBER400g Multipurpose spin-on grease cartridge GC400LSEP2
400g Spin-on Grease CartridgesQuick and Easy, No-Mess Cartridge Changing• Available in 3 Premium quality grease for various applications
Use in conjunction withPGS600 & PGS700 grease guns.
Further details on page 11b
Greasing Equipment Grease Cartridges
7www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Pin & Bush LubricantPin & Bush Lubricant has been designed for the lubrication of steel pins and bushes on many applications in the agricultural, construction and commercial industries.• Temperature range from -30º to +140ºC• High anti-wear properties with corrosion inhibiting additives• Substantially extends component life• Colour: Grey
DESCRIPTION PART NUMBER400g Pin & bush lubricant SP03005
Longlife High Temperature Grease NLGI No. 2A specially developed lithium complex grease for use in harsh agricultural, industrial and automotive environments. Exceptional mechanical stability greatly extends lubrication intervals.
• High Temperature (-20 to +150ºC)• Longlife• Excellent corrosion resistance for operating in wet conditions• Exceptional anti-wear performance• Colour: Blue
DESCRIPTION PART NUMBER400g Longlife high temperature grease cartridge GC400HP2
Premium Quality Multipurpose Grease NLGI No. 2Highly versatile multipurpose lithium grease for use in all anti-friction and plain bearings subject to high load conditions. Used extensively throughout the agricultural, industrial and automotive sectors
• Temperature (-20 to +140ºC)• High degree of corrosion protection• Excellent anti-wear performance• Clean, clear smooth appearance• Colour: Light Brown
DESCRIPTION PART NUMBER400g Multipurpose grease cartridge SP03003Z
Premium Quality Blue Lithium EP2 SV Grease NLGI No. 2Premium quality high performance, mineral oil, lithium thickened NLGI No2 lubricating grease suitable for multi-purpose applications. Lithium EP2 SV is formulated on a higher viscosity base oil than standard Lithium EP2 greases to give higher performance
• Temperature (-20 to +140ºC)• High degree of corrosion protection• Excellent anti-wear performance• Longlife• Colour: Blue
DESCRIPTION PART NUMBER500g Blue litium EP2 SV grease cartridge GC500EP2SV
8www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Greasing Equipment Grease Bucket / Tube
Multi-Purpose Grease Tube (250ml)• Work stable• 250ml Tube with screw cap• Water resistant• Dropping point 190° C• Designation as per DIN 51502: K 2K-30• Area of application from -35° C to +120° C• Oxidation resistance for slide and roller bearings• High-Performance multi-purpose grease - lithium soap-based
DESCRIPTION PART NUMBER250ml grease tube with screw cap FGP014539
EP Transmission GreaseEP liquid gearbox grease is a natural-coloured, long-fi bre sodium soap lubricating grease based on mineral oil. Suitable for lubricating rotary mower gearboxes, industrial gearbox-es, manual gearboxes and other stationary engine/gearbox units.(When using EP liquid gearbox grease, the size, power and seal of the gearbox must be taken into account.)• Temperature range: -30°C to +100°C• Drop point: approx. +150°C (DIN ISO 2176)• Water resistance: 3–90 (DIN 51 807 T.1)• Base oil viscosity at 40°C: approx. 130 mm²/s (DIN 51 562)• Designation: GP 0 H-30 (DIN 51 502),• ISO-L-XCABB 0 (ISO 6743-9)
DESCRIPTION PART NUMBER5 Kg Bucket of EP transmission grease ND9091
9www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Greasing Equipment Greaser Accessories
ZSB SwivelSwivel allowing 360º movement
DESCRIPTION PART NUMBER360º Swivel - thread 1/4" ZSB
KY CouplerStandard supergrip coupler to suit most grease nipples and grease guns• Thread: 1/8" BSP
DESCRIPTION PART NUMBERKY Coupler KY
Booster Gun c/w 360º SwivelSuitable for air powered greasing applications.Supplied as standard gun on the P3, P6 and P8 complete grease pumpsFeatures• A couple of simple presses of the trigger will double output pressureSpecifi cation• Maximum Operating Pressure: 69,000 kPa (10,000 psi, 690 bar)• Thread Inlet: 1/4" NPT Female
DESCRIPTION PART NUMBERBooster Gun to suit air powered greasing applications B2
Pressure GunSuitable for manual powered greasing applicationsFeatures• Can deliver grease at either High Pressure or High Volume• 360º swivel to prevent hose kinkingSpecifi cation• Gun Pressure: 69000 kPa (10,000 psi, 690 bar)• Output: 1.25g on High Volume switch, 0.45g on High Pressure switch
DESCRIPTION PART NUMBERPressure Gun to suit manual powered greasing applications KR
9awww.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
KY+ Grease CouplerMacnaught’s patent approved release mechanism on the new KY+ grease coupler delivers enhanced safety and is both easier and faster to use. The KY+ retains the benefi t of the original fl oating jaw design, providing a strong, leak-free connection while improving safety and usability through:• Internal pressure relief that reduces the risk of high pressure grease release.• Quick & easy release mechanism enabling one handed operation - Load & Lube!Features & Benefi ts:• Patent Approved internal pressure relief mechanism for easy disconnect under pressure and superior safety• Compact design for greater accessibility• Original Floating jaw design for leak free grip• Quick & easy release mechanism enabling one handed operation - Load & LubeTechnical Specifi cations:• Built-in hydraulic pressure relief• 10,000psi max working pressure
DESCRIPTION THREAD PART NUMBERKY+ Grease coupler 1/8" BSP KYPLUS18KY+ Grease coupler M10x1 KYPLUS10
NEWGREASE COUPLER
Greasing Equipment Accessories
10www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Greasing Equipment Accessories
Extended Needlepoint CouplersIdeal for hard to reach applications
DESCRIPTION PART NUMBER45º Needlepoint Coupler KZLN4590º Needlepoint Coupler KZLNRHook Needlepoint Coupler KZLNJ
Push On ExtensionFor Air EquipmentPush On fl exible extension for air operated equipment
DESCRIPTION PART NUMBERPush On Extension 330mm PDF13Push On Extension 530mm PDF21
Push On Flexible ExtensionFor Manual EquipmentPush On Flexible Extension with nipple to fi t KY coupler
DESCRIPTION PART NUMBER330mm Push On Flexible Extension KDF13530mm Push On Flexible Extension KDF21
KND 90º Needlepoint CouplerIdeal where access to the grease nipple is minimal
DESCRIPTION PART NUMBER90º Needlepoint Coupler KDN
KZE Concave Nipple CouplerFor use on special nipples or in some cases where nipples have been damaged
DESCRIPTION PART NUMBERConcave Nipple Coupler KZE
KZHY Hyperdermic Needlepoint CouplerIdeal for use on bearings fi tted with rubber dust covers. Length 130mm
DESCRIPTION PART NUMBERHyperdermic Needlepoint Coupler KZHY
Fuel Transfer Pumps Electrically Operated
13www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Self Priming Fuel Transfer Pumps• Diesel oil transfer pump, available in 12V or 24V• With handle and switch• Fused 2 metre battery cable with clips• 3/4" BSP ports• IP55• WARNING: Do not use the pump for gasoline (petrol) transfer
VOLTAGE FLOW RATE WEIGHT PART NUMBER12V 40 litres per min. 3.6Kg DC40220024V 40 litres per min. 3.6Kg DC404200
Self Priming Fuel Transfer Kits• Diesel oil transfer pump, available in 12V or 24V• With handle and switch• Fused 2 metre battery cable with clips• 4 metre delivery hose and nozzle• 3/4" BSP ports• IP55• WARNING: Do not use the pump for gasoline (petrol) transfer
VOLTAGE FLOW RATE WEIGHT PART NUMBER12V 40 litres per min. 6.8Kg LT40225124V 40 litres per min. 6.8Kg LT404251
Diesel Distributor - 230V• ON / OFF switch• Built in fi lter and bypass valve• 4 metre delivery hose and nozzle• 1" BSP ports• IP55• WARNING: Do not use the pump for gasoline (petrol) transfer
VOLTAGE FLOW RATE WEIGHT PART NUMBER230V 60 litres per min. 20.5Kg (pump unit) AF3060230V 100 litres per min. 20.5Kg (pump unit) AF30100
Fuel Transfer Pumps Electrically Operated
14www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
VOLTAGE AMPS WATT RPM FLOW RATE WEIGHT DIMENSIONS PART NUMBER230V 1.5 370 2800 60 litres per min. 8Kg 300 x 200 x 250mm HE60230V 4.5 750 1400 98 litres per min. 15.4Kg 300 x 200 x 250mm HE100
Self-Priming Vane Pump - 230VSelf-priming, rotary electric vane pumps for the transfer of diesel oil. They are equipped with self ventilating induction motor with IP55 protection, class F insulation with terminal cut-out at 160º located in the winding. By-pass valve is integrated into pump body. The pump casting is in cast-iron, treated against corrosion and paint finished. The pump rotor is in sintered steel, the stainless steel filter is incorporated in the pump body.• WARNING: Do not use the pump for gasoline (petrol) transfer.
Oil Transfer Pumps Hand Operated
15www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Oil Change KitSuitable for lawnmowers and other 4 stroke engines. Contains:• 1 litre waste oil container• 0.3 litre oil extraction pump• Funnel
DESCRIPTION PART NUMBEROil exchange kit FGP250000
Oil Extractor TankIdeally suited for extracting or exchanging engine oil or lubricants in:• Motor Vehicles• Motor Bikes• Marine Engines• Stationary Engines• Non lubricant such as water from fi sh tanks etc.
DESCRIPTION PART NUMBERManual Power Oil Extractor Tank FGP000099
Fuel & Oil Accessories Meters
17www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Mechanical Flow MeterThe Z98 fl ow meter has been designed for use with thin viscosity fuels only such as diesel oil, gasoline and lubricating oils. It should not be used for resale purposes. Using mechanical gears, this meter translates fl ow data from a nutating disc into calibrated units which are registered on the face of the meter. Z98 is equipped with a 3 digit re-sett able batch register complete with marked tenths as well as a 6 digit maximum cumulative total. Available with litre units or gallon units. It is fi tted with a calibration screw for the adjustment of different liquids. Suitable for use with pump system.
DESCRIPTION PART NUMBERMechanical fl ow meter Z98B
SPECIFICATIONSUnit of measure LitresFlow rate (min-max) 20 - 120Type Nutating DiscBatch total 999Cumulative total 999999Working pressure Max 3.5 barAccuracy +/- 1%Repeatability +/- 0.2%Connections 1" GHousing Material AluminiumWeight 1.8Kg
Fuel & Oil Accessories Pump & Filter Kits / Delivery Hoses
18www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
AC Pump & Filter KitsIncludes:• Pump (Available with 60 or 100lpm pump)• CIM-TEK 10micron Hydrosorb® filter• Fittings • Tank Dryer • ‘Y’ Strainer
DESCRIPTION PART NUMBER60lpm AC pump and fi lter kit PFK001100lpm AC pump and fi lter kit PFK002
AC Distributor Unit & Filter KitsIncludes:• Distributor Unit with delivery hose and nozzle (Available with 60 or 100lpm pump)• CIM-TEK 10micron Hydrosorb® filter• Fittings • Tank Dryer • ‘Y’ Strainer
DESCRIPTION PART NUMBER60lpm AC Distributor unit and fi lter kit PFK003100lpm AC Distributor unit and fi lter kit PFK004
DC Pump & Filter KitsIncludes:• Pump (40lpm pump, 45/60lpm available on request)• CIM-TEK 10micron Hydrosorb® filter• Fittings • Tank Dryer • ‘Y’ Strainer
DESCRIPTION PART NUMBER40lpm 12V DC pump and fi lter kit PFK00540lpm 24V DC pump and fi lter kit PFK006
Diesel Delivery Hoses to suit Pump & Filter KitsDESCRIPTION PART NUMBER3 metre 1" hose to suit AC units (1" BSP x 1" BSP) - rubber hose DDH13A4 metre 1" hose to suit AC units (1" BSP x 1" BSP) - rubber hose DDH14A5 metre 1" hose to suit AC units (1" BSP x 1" BSP) - rubber hose DDH15A6 metre 1" hose to suit AC units (1" BSP x 1" BSP) - rubber hose DDH16A8 metre 1" hose to suit AC units (1" BSP x 1" BSP) - rubber hose DDH18A4 metre 3/4" hose to suit DC units (1" BSP x 3/4" BSP) - rubber DDH344A6 metre 3/4" hose to suit DC units (1" BSP x 3/4" BSP) - rubber DDH346A
Diesel Oil HoseTemperature Range: -40ºC to +80ºCDescription: Synthetic rubber, black, smooth, antistatic, oil resistant. Reinforcement: Textile spiral construction. Oil and weather resistantApplicatio: Transfer of diesel oil
I.Dmm
O.D.mm
WEIGHTPER METER
WORKINGPRESSURE
BURSTINGPRESSURE
ROLLLENGTH
PART NUMBER
19 27 370g 10 bar 30 bar 50 DIESEL1925 35 610g 10 bar 30 bar 50 DIESEL25
DIESEL
DOIL
Fuel & Oil Accessories Gravity Feed Fuel Kits / Nozzles
19www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Gravity Feed Fuel Kits• Diesel Hose• Aluminium Nozzle• Power Crimped Hose Ends• Complete with Lever Valve & Fittings
DESCRIPTION PART NUMBER3 Mtr 1" BSP Gravity Feed Fuel Kit with premium rubber hose TOG1007A4 Mtr 1" BSP Gravity Feed Fuel Kit with premium rubber hose TOG1011A5 Mtr 1" BSP Gravity Feed Fuel Kit with premium rubber hose TOG1020A6 Mtr 1" BSP Gravity Feed Fuel Kit with premium rubber hose TOG1021A
Any Length made to order, please ask Sales Staff for further details.
Manual Aluminium Nozzle• Flow: Max 60 lpm• Inlet: 1" BSP/G• Outlet: Ø25• Swivel: Yes• Max Pressure: 3.5 bar
DESCRIPTION PART NUMBERManual aluminium nozzle with 1" inlet TOPGUN
Aluminium Nozzle - with Automatic Shut OffNot suitable for Gravity Flow SystemsThis nozzle can be used for the following applications:Heavy-Duty, High flow Truck Stop, Bus and Fleet Service• Flow: Max 120 lpm• Inlet: 1” BSP/T• Outlet: 1 3/16”• Swivel: Yes
DESCRIPTION PART NUMBERAluminium Nozzle with Automatic Shut Off TOG1040
Brass Swivel for use with NozzlesMALE END FEMALE END PART NUMBER
3/4" BSP 1" BSP MEC25333411" BSP 1" BSP MEC253311
Aluminium Nozzle - with Automatic Shut OffNot suitable for Gravity Flow SystemsThis nozzle is designed for today’s consumers needs. Small, trim, light weight, easy and convenient to operate.• Flow: Max 60 lpm• Inlet: 1” BSP/G• Outlet: 15/16"• Swivel: Yes
DESCRIPTION PART NUMBERAluminium Nozzle with Automatic Shut Off TOG1038
Fuel & Oil Accessories Filters
19awww.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Filter Wrench to suit Goldenrod® AssemblyDESCRIPTION PART NUMBERGoldenrod Filter Wrench TOG50491
Replacement Bowl to suit Goldenrod® Filter AssemblyDESCRIPTION PART NUMBERSpare bowl c/w seal to suit Goledrod® Filter Assembly TOG50BOWL
Goldenrod® Particle and Water Block Filter AssembliesThe Goldenrod Particle and Water Block fuel fi lter has a transparent bowl which allowsfor visual monitoring of fuel.• The element needs to be replaced when fl ow becomes too slow• Suitable for gravity and pump feed• 1" BSP Ports
Suitable for ULSD Diesel. TYPE MICRON WATER
BLOCKLPM ULSD COMPLETE
ASSEMBLY& ELEMENT
Particle only 10 No 100 lpm Yes TOG50495Particle / Water block 17 Yes 100 lpm Yes TOG50W496
GOLDENROD
Goldenrod® Replacement Elements TYPE MICRON WATER
BLOCKLPM ULSD ELEMENT
ONLYParticle / Water block 17 Yes 100 lpm Yes TOG50496Bio Diesel 10 No 100 lpm Yes TOG50497Stainless steel - 48# 381 No 100 lpm Yes TOG50015
Fuel & Oil Accessories Strainers / Drumtap / Swivels
20www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Brass Footvalve c/w StrainerFEMALE THREAD PART NUMBER
1" BSP BFV1
Intake Strainer with Hose TailTAIL TO SUIT HOSE ID PART NUMBER
19mm (3/4") FLT2025mm (1") FLT25
Drumtap with Lockable LeverDESCRIPTION PART NUMBERDrumtap with lockable lever - 3/4" male thread TOG2093
Brass "Y" Intake StrainerTHREAD BSP MESH PART NUMBER
1/2" Female 400 micron YS123/4" Female 400 micron YS341" Female 400 micron YS1
Fuel & Oil Accessories
20awww.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Bio-Tek Bio Diesel Tank Filters
Bio-Tek® Filters - Microglass (Particulate) & Hydroglass (Water & Particulate)Bio Tek fi lters have seals, internal coating and fi lter media made of materials resistant to the aggressive effects of biofuels. Compatible with gasoline and ethanol blends up to 25%, Diesel / ULSD and biodiesel blends up to 20%, and 100% bio Diesel.Use Microglass for particulate only removal and Hydroglass for particulate and water removal.
It is recommended that you use a Cim-Tek nickel plated fi lter head housings with Bio-Tek fi lters
Bio-Tek® 260 / 300 Series Filter - 70 lpm• Application: Fuel containing Biofuel• Dimensions: 8 3/4" x 3 3/4"• Thread: 1" - 12 UNF• Pump or gravity fl ow
DESCRIPTION FLOW FILTRATION PART NUMBERFilter head 1" BSP nickel plated CT50009NMicroglass particulate removal 70 lpm 10 micron CT70234Hydroglass water / particulate 70 lpm 10 micron CT70236
Bio-Tek® 800 Series Filter - 110 lpm• Application: Fuel containing Biofuel• Dimensions: 11" x 5"• Thread: 1 1/2" - 16 UNF
DESCRIPTION FLOW FILTRATION PART NUMBERFilter head 1" BSP nickel plated CT50105NMicroglass particulate removal 110 lpm 10 micron CT70028Hydroglass water / particulate 110 lpm 10 micron CT70024
Fuel & Oil Accessories
21www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Water Absorbing Tank Filters
HydroSorb® Filters - Water Absorbing Tank FilterCim-Tek Filtration, Illinois are the world leader in fuel fi lter technology. They offer the ideal solution to ULSD Diesel fi ltration with the patented HydroSorb® range of fi lters for particle and water removal. HydroSorb® has a high particle and water holding capacity which results in cleaner fuel. Available in 10 or 30micron rating.Please use the following listings to help you choose the most suitable fi lter for your needs.
HydroSorb® 450 / 475 Series Filter - 10 & 30 Micron / 120 lpmApplication: General fuelling• Dimensions: 8" x 3 3/4"• Thread: 1 1/2" - 16 UNF• Removes Water and Dirt from fuel• 10 Micron fi lter suitable for Pumped fuel up to 95 lpm• 30 Micron fi lter suitable for Gravity Feed or Pumped fuel up to 120 lpm• ULSD Compatible• Filter head: 1" BSP Ports
DESCRIPTION FLOW FILTRATION PART NUMBERCim Tek Hydrosorb® fi lter 95 lpm 10 microns CT70075Cim Tek Hydrosorb® fi lter 95 lpm 30 microns CT70076Cim Tek Hydrosorb® fi lter 120 lpm 30 microns CT70043Filter head with 1" BSP ports to suit CT70075 and CT70076 CT50034
HydroSorb® 400 Series Filter - 10 & 30 Micron / 95 lpmApplication: General fuelling. Short fi lter for where space is limited• Dimensions: 5 1/2" x 3 3/4"• Thread: 1 1/2" - 16 UNF• Removes Water and Dirt from fuel• 10 Micron fi lter suitable for Pumped fuel up to 95 lpm• 30 Micron fi lter suitable for Gravity Feed or Pumped fuel up to 95 lpm• ULSD Compatible• Filter head: 1" BSP Ports
DESCRIPTION FLOW FILTRATION PART NUMBERCim Tek Hydrosorb® fi lter 95 lpm 10 microns CT70060Cim Tek Hydrosorb® fi lter 95 lpm 30 microns CT70065Filter head with 1" BSP ports to suit CT70060 and CT70065 CT50034
HydroSorb® 800 Series Filter - 10 Micron / 150 lpmApplication: High volume commercial systems• Dimensions: 11" x 5"• Thread: 1 1/2" - 16 UNF• Removes Water and Dirt from fuel• 10 Microns• Suitable for Pumped fuel up to150 lpm (Not suitable for Gravity Feed)• ULSD Compatible• Filter head: 1" & 1 1/2" BSP Ports
DESCRIPTION FLOW FILTRATION PART NUMBERCim Tek Hydrosorb® fi lter 150 lpm 10 microns CT70063Filter head with 1" BSP ports to suit CT70063 CT50105NFilter head with 1 1/2" BSP ports to suit CT70063 CT50208
Fuel & Oil Accessories
22www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Water Absorbing Tank Filters / Particle Filters
HydroSorb® 260 GRAVITY FLOW Series Filter - 30 MicronReplacement fi lter only available. Filter head no longer available. For NEW Gravity Flow installations use 400/450 Series 30 micron fi lter and head• Dimensions: 8 1/2" x 3 3/4"• Thread: 1 3/8" - 12 UNF• Removes Water and Dirt from fuel• 30 Microns• Suitable for Gravity Flow and Pumped fuel up to 65 lpm• ULSD Compatible• Filter head: 1" BSP Ports
DESCRIPTION FLOW FILTRATION PART NUMBEROld type - Cim Tek Hydrosorb® fi lter 65 lpm 30 microns CT70066
HydroSorb® 260 Series Filter - 10 & 30 Micron / 65 lpmApplication: General fuelling. Old series fi lter and head replaced by 450 series• Dimensions: 8 1/2" x 3 3/4"• Thread: 1" - 12 UNF• Removes Water and Dirt from fuel• 10 or 30 Microns• Suitable for Pumped fuel up to 65 lpm• ULSD Compatible• Filter head: 1" BSP Ports
DESCRIPTION FLOW FILTRATION PART NUMBEROld type - Cim Tek Hydrosorb® fi lter 65 lpm 10 microns CT70062Filter head 1" BSP nickel plated CT50009N
Old Series
400 Series Particle Filter - 2 Micron / 95 lpmApplication: For systems that require Ultra Fine Filtration• Dimensions: 5 1/2" x 3 3/4"• Thread: 1 1/2" - 16 UNF• Removes Dirt from fuel• 2 Microns• Suitable for Pumped fuel up to 95 lpm• ULSD Compatible• Filter head: 1” BSP Ports
DESCRIPTION FLOW FILTRATION PART NUMBERCim Tek Particle filter 95 lpm 2 microns CT70808Filter head with 1" BSP ports to suit CT70808 CT50034
450 Series Particle Filter - 2 Micron / 95 lpmApplication: For systems that require Ultra Fine Filtration• Dimensions: 8" x 3 3/4"• Thread: 1 1/2" - 16 UNF• Removes Dirt from fuel• 2 Microns• Suitable for Pumped fuel up to 95 lpm• ULSD Compatible• Filter head: 1” BSP Ports
DESCRIPTION FLOW FILTRATION PART NUMBERCim Tek Particle filter 95 lpm 2 microns CT70810Filter head with 1" BSP ports to suit CT70808 CT50034
ULTRA FINE Particle Only Filtration
Fuel & Oil Accessories
23www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Tank Dryer
Tank Dryer - Water Absorbing PolymerCim-Tek has developed a water absorbing product called the Tank Dryer for use with fuel storage tanks. The Tank Dryer contains a proprietary super-absorbent polymer that absorbs free water at the bottom of tanks containing diesel, bio diesel and fuel oil.It is easy to use, inexpensive, and helps to prevent downtime caused by water contamination. Take care of the problem before it starts . . . use Cim-Tek® Tank Dryer.
DESCRIPTION PART NUMBERCim-Tek Tank Dryer CT60038
Fuel & Oil Accessories Hosetails / Fittings
24www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Brass BSP HosetailMALE THREAD TAIL TO SUIT HOSE ID PART NUMBER
3/4" BSP 3/4" BRASSRC34193/4" BSP 1" BRASSRC34251" BSP 3/4" BRASSRC10191" BSP 1" BRASSRC1025
Male PlugMALE THREAD SELF COLOUR GALVANISED
1" - FG29011 1/2" GB147112 -
2" - FG2902L4" 13025343 -
Female CapMALE THREAD SELF COLOUR
1" TOG10713" TOG1072
Male / Male GB TubeMALE THREAD MALE THREAD TUBE LENGTH GALVANISED
3/8" 3/8" 200mm FG2338201" 1" 80mm FG23180
Male / Male GB NippleMALE THREAD MALE THREAD SELF COLOUR STAINLESS
STEEL1/2" 1/2" TOG1079 -3/4" 3/4" TOG1075 -3/4" 1" TOG407760 -1" 1" TOG1069 TOG1069SS
1 1/2" 1 1/2" GB280 -2" 2" GB2 -3" 3" GB3 -
Fuel & Oil Accessories Fittings
25www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Female / Female GB SocketFEMALE THREAD FEMALE THREAD SELF COLOUR
1/2" 1/2" TOG10741" 1" TOG1070
1 1/4" 1 1/4" TOG10801 1/2" 1 1/2" TOG1083
2" 2" FG1624" 4" 12016328
Female GB TeeTHREADS 1 & 2 THREAD 3 SELF COLOUR GALVANISED
1/2" 3/4" TOG1076 -1 1/2" 1/2" GB112T GB112TGALV
2" 1/2" GB2T12 -2 1/2" 2 1/2" - FG130212
1
2
3
Female / Male GB Socket• 3 Piece
FEMALE THREAD MALE THREAD GALVANISED2 1/2" 2 1/2" FG341212
Fuel & Oil Accessories Fittings
26www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Female / Female 90º GB ElbowFEMALE THREAD FEMALE THREAD GALVANISED
1/2" 1/2" TOG10733/4" 3/4" TOG9034
Female GB CrossFEMALE THREAD FEMALE THREAD GALVANISED
1" 1" FG1801
Female / Female 90º GB Elbow c/w Inlet PortFEMALE THREAD FEMALE THREAD INLET PORT SELF COLOUR
1 1/2" 1 1/2" 1/2" GB130R2" 2" 1/2" GB2R12
Female / Male 90º GB ElbowMALE THREAD FEMALE THREAD GALVANISED STAINLESS
STEEL1" 1" TOG1069A TOG1069ASS
Fuel & Oil Accessories Shut Off Valves
27www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Ball Lock Lever Type Shut Off Valve (Female/Female)• Temperature continual from -20°C to +120°C.
PORT SIZE PART NUMBER1/4" BSP LTVFF143/8" BSP LTVFF381/2" BSP LTVFF123/4" BSP LTVFF341" BSP LTVFF1
1 1/4" BSP LTVFF1141 1/2" BSP LTVFF112
2" BSP LTVFF22 1/2" BSP LTVFF212
3" BSP LTVFF34" BSP LTVFF4
Ball Lock Lever Type Shut Off Valve (Male/Female)• Temperature continual from -20°C to +120°C.
PORT SIZE PART NUMBER3/8" BSP LTVMF381/2" BSP LTVMF123/4" BSP LTVMF341" BSP LTVMF1
Gate Type Shut Off ValvePORT SIZE PART NUMBER
3/8" BSP SOV381/2" BSP SOV123/4" BSP SOV341" BSP SOV1
1 1/4" BSP SOV1141 1/2" BSP SOV112
2" BSP SOV23" BSP SOV34" BSP SOV4
Lockable Gate Type Shut Off ValvePORT SIZE PART NUMBER
1" BSP SOV1LGV
28www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Urea - Ad Blue® Nozzles / Kits
Urea - Ad Blue® NozzleSuitable for use with Urea Ad Blue® / WaterLight weight design with lever lock• Flow: Max 60 lpm• Inlet: 19mm hosetail
DESCRIPTION PART NUMBERUrea Ad Blue® nozzle with 19mm hosetail TOGAB010
IBC Gravity Hose Kit for use with Ad Blue®Suitable for use with Urea Ad Blue® / WaterSupplied with• Gun• 3 meter hose and hose clips• IBC fitting with camlock to hose
DESCRIPTION PART NUMBERIBC Gravitiy hose kit for use with Ad Blue® ADBK001
www.mchc.ie 28aC O M P O N E NO M P O N E N T SC O M P O N E N T S
CX80 Multi-Purpose LubricantThis specially formulated multi-purpose lubricant is made from the highest quality raw materials.• Loosens rusted parts quickly• Cleans and protects equipment from corrosion• Eliminates squeaking and creaking of hinges, locks, curtain rods and other mechanical devices• Improves the function of ignition systems, which are endangered with fl ooding or humid places• Filters through moisture and forms a protective barrier between the water and the metal• Eliminates moisture-triggered short circuits• Suitable for electronic ignitions• Protects vehicle locks from moisture and freezing• Defrosts locks• Removes dirt, dust, coloured crayons, felt tip pens, chewing gum and adhesives• 1001 applications in industry, workshops or in the house
DESCRIPTION SIZE PART NUMBERCX80 Multi-purpose lubricant 500ml x 24 CX80MP
CX80 Multi-Purpose Lubricant with Tefl on®An excellent multi-purpose product with exceptional quality of lubrication which can be used in many different industries and in the area of everyday life.• The result after using is a coat which improves the resistance to abrasion and increas-es the working life• The low-friction coeffi cient characteristic of TEFLON®, leading to high effi ciency for electrical connections, structural fi ttings, military equipment, and in many other areas in which a repetitive movement of the surface is important• Plays a major role in the bicycle industry, ideally suited for the lubrication of chains, gears, brake lines, gears, increases their working life and reduces friction between the elements and their wear and tear• Also suitable as anti-adhesive agent• Can be used in the process for formation of rubber and plastic components, it does not affect the stability and it makes it easier to release from the mould parts
DESCRIPTION SIZE PART NUMBERCX80 Multi-purpose lubricant with Tefl on® 500ml x 24 CX80TMP
www.mchc.ie
Grease
28bC O M P O N E NO M P O N E N T SC O M P O N E N T S
CX80 Silicone SprayFor Plastics and Rubber. Colourless lubricant with high viscosity.• Creates a protective fi lm with excellent resistance• Coverage of the friction surfaces with a thin layer of silicone grease leads to an effective reduction of friction and provides a long-lasting protection of the equipment• Suitable for use at contact surfaces of plastic, metal, ceramics, rubber, etc.• Does not stain does not adhere to dust • Non-adhesive, facilitates the removal of forms• Operating temperatures from -60°C up to +230°CApplication:• All kinds of sanitary equipment – conventional and lever valves (gas), seals, connectors, fi ttings, valves, joints• Clean lubrication of equipment in textile, paper, and food industry• Electric and power distribution equipment (assurance of electrical circuits)• Energetic cases which work under extreme temperatures (from -60°C up to +230°C)• In the automotive industry for the lubrication of links, locks, hinges, screws and sleeves
DESCRIPTION SIZE PART NUMBERCX80 Silicone spray 500ml x 12 CX80SG
NSF®
CX80 White GreasePenetrates gaps, forms a lubricating layer that remains where the grease wasapplied.• Non-hardening • Non-dripping • Non-staining• Water and heat resistant • Fights rust and corrosion• Does not cause discoloration of paint• Operating temperature from -40°C up to +100°CApplication:• Long-lasting lubrication on auto hinges, gears, sprockets• Locks, outdoor hinges, latches, overhead door tracks, pulleys• Cables and guide rails
DESCRIPTION SIZE PART NUMBERCX80 White grease 500ml x 12 CX80WG
CX80 Lithium GreaseMulti-purpose product for the lubrication of industrial, agricultural and motorvehicle systems. It ensures excellent lubrication under the toughest conditions.• Resistant to water and oxidation• Protects against attrition and corrosion• Extends life of bearings• Contains EP additives• Mechanically stable and because of its soft consistency, easy to apply• Passes the SKF EMCOR test• Operating temperatures from -20°C up to +130°C
DESCRIPTION SIZE PART NUMBERCX80 Lithium grease 500ml x 12 CX80LG
CX80 Copper GreaseAnti-Adhesive. Multi-purpose product for use under the most diffi cult conditions and within high temperature ranges from -30°C up to 1200°C.• Safeguards against attrition, corrosion and high temperatures• Ensures excellent lubrication • Wide temperature range (-30°C to +1200°C)Application:• Screws and nuts • Threads and all connected surfaces• Fittings • Spark plugs • Wheel and brake discs• Battery terminals • Port Installations • Revolving discs• Highly stressed bearings of all kinds • Elements in industrial, construction• Other elements of industrial systems, construction, agricultural and motor vehicles
DESCRIPTION SIZE PART NUMBERCX80 Copper grease 500ml x 12 CX80CG
www.mchc.ie
Adhesives
28cC O M P O N E NO M P O N E N T SC O M P O N E N T S
CX80 RC43 Thread Lock - Medium StrengthAnaerobic adhesive for securing metal threaded connections with medium strength bonding. Remains liquid until isolated from oxygen in the presence of metal ions.• Medium strength • Protection against corrosion• Resistance to vibration • Preventing leakage of thread• Initial binding to 15 minutes • Full strength after 24 hours• Increasing the force and slip for easy installation• Temperature resistance from -55°C to +150°C• Disassembly with manual toolsApplication:• Locking nuts and bolts• Sealing• Protects threads against loosening during vibration• Recommended for small thread (the thread diameter up to M36)
DESCRIPTION SIZE PART NUMBERCX80 RC43 Thread lock - blister pack 10ml x 20 RC4310CX80 RC43 Thread lock 50ml x 10 RC4350
CX80 RC70 Thread Lock - High StrengthAnaerobic adhesive for securing metal threaded joints with very high bonding strength. Remains liquid until isolated from oxygen in the presence of metal ions.• High strength • Protection against corrosion• Resistance to vibration • Resistance to oiling• Initial binding to 15 minutes • Full strength after 24 hours• Increasing pressure and slip for easy installation• Resistant to temperatures from -55°C to +150°CApplication:• Permanent locking of nuts and bolts• Sealing• Securing threads against loosening during vibration• Recommended for small thread (the thread diameter up to M20)
DESCRIPTION SIZE PART NUMBERCX80 RC70 Thread lock - blister pack 10ml x 20 RC7010CX80 RC70 Thread lock 50ml x 10 RC7050
CX80 BONDICX GlueGeneral purpose adhesive with high viscosity and high strength.• Fast curing• Non-dripping• Perfect for porous materials or when controlling adhesive fl ow is criticalApplication:• Metal • Plastic • Leather• Paper • Cardboard • Wood• Cork • Foam
DESCRIPTION SIZE PART NUMBERCX80 Bondicx gel glue - blister pack 3g x 24 RCBOND3CX80 Bondicx gel glue - blister pack 3g RCBOND3111CX80 Bondicx glue - blister pack 5g x 24 RCBOND5
www.mchc.ie
Engine & Brake
28dC O M P O N E NO M P O N E N T SC O M P O N E N T S
CX80 Starting FluidMakes starting petrol and diesel engines at low temperatures easier.• Causes rapid engine start, extending life of the starter and the battery• Contains an additive that lubricates upper part of the cylinder, in order to minimize the consumption of the engine failed starts• Effective up to -50°C• Aerosol fi ts all standard brackets injectorsApplication:• In passenger cars, trucks, buses, construction and agricultural machinery, boats, air planes, mining equipment
DESCRIPTION SIZE PART NUMBERCX80 Starting fl uid 500ml x 12 CX80SF
CX80 Brake CleanerInstant spray for cleaning brakes.• Removes all sediments from asphalt, tar, dust from brake pads wear and baked-on dirt• Eliminates brakes squeal• Leaves no traces• Removes brake fl uid, oil and grease• Makes rapid repair and fi tting of parts easier• Does not contain chlorinated solvents• DegreasesApplication:• Cleans working parts of the braking system• Can be used for cleaning carburettors and throttle (won’t get into the engine or the injection system)
DESCRIPTION SIZE PART NUMBERCX80 Brake cleaner 500ml x 12 CX80BC
CX80 Fan Belt SprayApplicable for all types of drive belts. Suitable for strengthening and securing against slippages caused by heat, cold, humidity or presence of liquids• Easy to use• Suitable for all types of belts• Preserves its softness, does not harden• Protects the belt against aging• Hinders humidity and therefore safeguards against cracks and premature wear and tear• Increases friction, securing the belt against slippageApplication:• For fan and fl at belts, made of rubber, leather or fabric • Particularly suitable for all types of conveyer belts in auto vehicles, lorries/trucks, busses and ship engines, agricultural equipment, in air-conditioning equipment and industry-used drive belts.
DESCRIPTION SIZE PART NUMBERCX80 Fan belt spray 500ml x 12 CX80FB
Consumables Threadlocking
29www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
275 Threadlocking Adhesive - High StrengthThis high strength, high viscosity threadlocker secures and seal bolts, nuts and studs up to size M80. The product cures when confi ned in the absence of air between close fi tting metal surfaces and prevents loosening and leakage from shock and vibration.Fixture time: Steel 15 min. / Brass 7 min. / Stainless Steel 180 min. Temperature range: -55°C to +150°C Breakaway torque: 25 Nm
DESCRIPTION PART NUMBER50ml Bottle 0103753
270 Threadlocking Adhesive - Permanent LockingThis high-strength threadlocker serves to permanently lock and seal bolts, nuts and studs which must not come loose up to size M20. To prevent loosening due to vibration, it acts with maximum effi cacy on all metals and is tolerant of minor contamination such as oils and cutting fl uids. Can be disassembled by heating to 300°C.Fixture time: Steel 10 min. / Brass 10 min. / Stainless Steel 150 min. Temperature range: -55°C to +180°C Breakaway torque: 33 Nm
DESCRIPTION PART NUMBER12 x 10ml Bottle 010330350ml Bottle 27012 x 24ml Blister card 0103420
2700 Threadlocking Adhesive - Permanent LockingLike LOCTITE® 270™ this high-strength threadlocker serves to permanently lock and seal bolts, nuts and studs, up to size M20 and prevents loosening due to vibration. It acts with maximum effi cacy on all metals and is tolerant of minor contamination such as oils and cutting fl uids. It’s key differentiator is the “White” Material Safety Data Sheet. It carries no hazard symbols, risk or safety phrases and does not contain any declarable carcinogens, mutagens or reproductive toxin. Can be disassembled by heating to 300°C.Fixture time: Steel 5 min. / Brass 4 min. / Stainless Steel 5 min. Temperature range: -55°C to +150°C Breakaway torque: 20 Nm
DESCRIPTION PART NUMBER12 x 5ml Blister card 1495037
243 Threadlocking Adhesive - Medium StrengthThis general purpose threadlocker secures and seal bolts, nuts and studs up to size M36 to prevent loosening due to vibration on moving assemblies (e.g. pumps, gear boxes, presses) and allows disassembly with normal tools. Effective on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination such as oils and cutting fl uids.Fixture time: Steel 10 min. / Brass 5 min. Temperature range: -55°C to +180°C Breakaway torque: 26 Nm
DESCRIPTION PART NUMBER12 x 24ml Blister card 010343050ml Bottle 135278
2400 Threadlocking Adhesive - Medium StrengthThis medium threadlocker secures and seal bolts, nuts and studs up to size M36. Prevents loosening on vibrating assemblies (e.g. pumps, gear boxes, presses) and allows disassembly with normal tools. Effective on all metals and is tolerant of minor contamination such as oils and cutting fl uids. It’s key differentiator is the “White” Material Safety Data Sheet. LOCTITE 2400 carries no hazard symbols, risk or safety phrases and does not contain any declarable carcinogens, mutagens or reproductive toxins.Fixture time: Steel 10 min. / Brass 8 min. Temperature range: -55°C to +150°C Breakaway torque: 20 Nm
DESCRIPTION PART NUMBER12 x 5ml Blister card 1495032
Consumables Pipe & Thread Sealing
30www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
55 Pipe Sealing CordLoctite® 55™ threaded pipe and fi tting sealant needs no cure time and results in an immediate full pressure sealing. It is wound straight from the dispensing package onto the threads of the pipes. Recommended for sealing metal and plastic tapered pipe threads and fi ttings up to 4" NPT (National Pipe Thread) for use in industrial applications in aqueous and non-aqueous fl uids. Certifi ed to NSF/ANSI, Standard 61, with approval for gas and potable water.Temperature range: -55 to +130°C
DESCRIPTION PART NUMBER150 metre Container 0105500
572 Slow Cure Thread SealantLoctite® 572™ is designed for the locking and sealing of metal pipe fi ttings. Recommended for all coarse metal threads up to 3" where slow cure is required for adjusting of valves and fi ttingsTemperature range: -50°C to +150°C Breakaway torque: 7 Nm
DESCRIPTION PART NUMBER50ml Bottle 0105841
577 Slow Cure Thread Sealant - Medium StrengthLoctite® 577™ is designed for the locking and sealing of metal only threaded pipes and fi ttings up to size M80. Particularly suitable for overhead and fast application at low temperatures as it provides an instant, low-pressure seal and offers less migration of liquid product after application. Resistant to Fuel, Oil, Coolants and Hydraulic FluidsTemperature range: -55°C to +150°C Breakaway torque: 11 Nm
DESCRIPTION PART NUMBER50ml Bottle 577
Consumables Gasketing
31www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
510 High Temperature Flange SealantLoctite® 510™ is a high temperature resistant anaerobic general gasketing product, which cures when confi ned in the absence of air. Ideal for use on rigid metal fl anges or where high temperature and chemical resistance is needed. It ensures an instant, low-pressure seal, adapts to surface irregularities and increases the torque capacity.Fixture time: Steel 25 min. / Aluminium 45 min.Temperature range: -55°C to +200°C
DESCRIPTION PART NUMBER50ml Tube 0502030
5980 Gasket Maker / SealantThis black silicone fl ange sealant has excellent adhesive strength and cures to a perma-nently fl exible, reliable and long lasting gasket. The product can also replace cut gaskets. Meets major automotive manufacturer specifi cations. Instant sealing performance up to 0.25mm at 0.35 bar. Ideal for gearboxes, thermostat housings, pumps, timing gear covers and oil sumps and for applications involving large gaps like stamped sheet metal covers where good oil resistance and the ability to withstand high joint movement is re-quired. The unique even-fl ow nozzle on the Quick Gasket Dispenser is very easy to use and allows dispensing with extra accuracy.Skin over time: 30 min.Temperature range: -55°C to +200°C
DESCRIPTION PART NUMBER12 x 100ml Tube 1717857
515 Flexible Medium CureLoctite® 515™ seals close fi tting joints between rigid metal faces and fl anges and will fl ex with minor fl ange movement. Provides resistance to low pressure immediately after assembly of fl anges. Typically used as a form-in-place gasket for pumps, thermostats, compressors, transmission housings and axle coversFixture time: Steel 30 min. / Aluminium 30 min.Temperature range: -55°C to +150°C
DESCRIPTION PART NUMBER50ml Tube 0501032
574 Multi GasketLoctite® 574™ seals close fi tting joints between rigid metal faces and fl anges. Provides resistance to low pressure immediately after assembly of fl anges. Typically used as a form-in-place gasket on rigid fl anged connections, e.g. gearbox and engine casings etc.It has a high oil tolerance and excellent water and glycol resistance.Fixture time: Steel 15 min. / Aluminium 45 min.Temperature range: -55°C to +150°C
DESCRIPTION PART NUMBER50ml Bottle 0511063
Consumables Gasketing / Retaining
32www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
5922 Flange SealantLoctite® 5922™ is a black, viscous paste for sealing/dressing old and new pre-cut gaskets (paper, cork, felt, etc.). It is a slow drying, fl exible setting paste that changes to a pliable, non-hardened fi lm through solvent evaporation. It seals fl anges, fi ttings, connections and fl exible assemblies against leakage. It increases the reliability of gasket seals. It is suitable for valve cover gaskets, oil pan gaskets, cover plates, threaded connections and hose connections and is ideal for part assembly after repairs. Temperature range: -54°C to +204°C
DESCRIPTION PART NUMBER12 x 60ml Blister Card 142274
5926 Instant GasketLoctite® 5926 is a multi-purpose fl exible silicone sealant. Ideal for use on machined, painted or cast surfaces, metal or plastic. It cures on exposure to moisture in the air to form a tough rubber gasket. This product resists ageing, weathering and thermal cycling without hardening, shrinking or cracking. Suitable on valve covers, timing gear covers, differential covers, oil pans, transmission pans, water pumps, and thermostat housings.Skin over time: 60 min.Temperature range: -55°C to +200°C
DESCRIPTION PART NUMBER12 x 40ml Blister Card 2311041310ml Tube 5926
648 Retaining Compound - High StrengthThis product is designed for the bonding of cylindrical fi tting parts. It exhibits robust curing and offers high temperature performance and good oil tolerance. High strength on all metals, including passive substrates (e.g. stainless steel) and is ideal for retention of parts with a clearance or interference fi t up to gap size 0.15mm and high-strength assemblies. Typical applications are the retaining of splined shafts, bearings, gearings and steering system components. Can be disassembled by heating to 300°CTemperature range: -55°C to +180°C
DESCRIPTION PART NUMBER648 High Strength retaining compound - 50ml Bottle 0103643
595 Silicone SealantDesigned for superior bonding and sealing to most surfaces like glass, metal, ceramics, composites and most plastics (not recommended for concrete). This product resists ageing, weathering and thermal cycling without hardening, shrinking or cracking. Ideal for components subjected to shock, constant vibration, twisting, fl exing, thermal expansion and contraction The thixotropic nature of Loctite® 595 reduces the migration of liquid product after application to the substrate.Skin over time: 10 to 15 min.Temperature range: -55°C to +250°C
DESCRIPTION COLOUR PART NUMBER12 x 310ml Tube Clear Silicone Sealant Clear 2311048310ml Tube Black Silicone Sealant Black 231104911112 x 310ml Tube Black Silicone Sealant Black 2311049
641 Retaining Compound - Medium StrengthDesigned for the bonding of cylindrical fi tting parts, particularly where disassembly is required for servicing operations. The product cures when confi ned in the absence of air between close-fi tting metal surfaces and prevents loosening and leakage due to shock and vibration. Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings.Temperature range: -55°C to +150°C
DESCRIPTION PART NUMBER641 Medium Strength retaining compound - 50ml Bottle 0103650
Consumables Retaining / Structural Bonding
33www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Super GlueHigh performance formula gives a strong bond in seconds. Ideal for bonding china, porcelain, most plastics, paper, card, metal, rubber, wood, leather and many other different materials. Dries transparent for invisible bonds, is solvent-free and water and dishwasher resistant. There is a self-piercing & anti-clog cap and the Precision bottle has an extra long nozzle that is ideal for diffi cult repair jobs.
DESCRIPTION PART NUMBERSuper Glue - Universal 24 x 3g Blister Card 0001602Super Glue - Precision 24 x 5g Blister Card 0001612
319 Rear View Mirror BonderKit for bonding metal rear-view mirror brackets to windscreen. Compensates for differential thermal expansion of parts and therefore also recommended for metal vent window handles and hinges. Can also be used for glass-to-metal joints on furniture etc. Ideal for glass mounted phone and radio aerials.
DESCRIPTION PART NUMBER0.5ml Blister Card 1706001
Terostat 8517H Glass PrimerPrimer for Direct Glazing Sealants. Terostat primer is used for adhesion improvement and UV protection. To be used if the glass has a ceramic printed border and where bare metal is exposed on the metal vehicle frame
DESCRIPTION PART NUMBER12 x 25g Bottle 425850
Consumables Flexible Sealing & Bonding
34www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Terostat PU92 SealantA one component polyurethane black adhesive that cures by reacting with atmospheric moisture to give an elastic product. The product has good adhesion to many metals and plastics without primer. Used in vehicle body manufacture, railway carriages and boat building. High strength and therefore capable of partially or completely replacing screws, rivets & clips. Anti-vibration effect due to high elasticity. Over paintable, sandable and grindable. Suffi cient open time for large surface bonding, high sag resistance and can be spatula applied
DESCRIPTION PART NUMBER12 x 310ml Cartridge 742582
Terostat 8597 HMLC Glazing SealantA one component, moisture curing Direct Glazing Sealant used for windscreen replacement where a solid safety guarantee is required, with excellent sag resistance based on polyurethane, which cures by reacting with moisture to a soft elastic product. The skin formation and curing times are dependent on humidity and temperature and also depends on the joint depth. Safe drive-away time of 1 hour according to FMVSS and 4 hours according to to the most stringent European crash test standard.
DESCRIPTION PART NUMBER12 x 310ml Cartridge 450508
Consumables Anti-Seize / Lubrication
35www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
8040 Freeze & ReleaseA special mineral oil formulation to free rusted, corroded and seized parts. The shock-freezing effect will cool parts instantly down to -43ºC and cause microscopic cracks in the layer of rust. This allows the lubricating ingredients to work directly into the rust by capillary action. Released parts remain lubricated and protected from corrosion
DESCRIPTION PART NUMBERFreeze & Release (8040) 12 x 400ml 760225Freeze & Release (8040) 400ml 760225111
Bulk & ApplicatorNo. DESCRIPTION PART NUMBER4 WD40 - 5 litre container complete with spray applicator WD40-5
With literally thousands of uses, WD-40 is the #1 multi-purpose problem solver. It cleans, protects, penetrates, lubricates and displaces moisture like no other product on earth.
Aerosol CansNo. DESCRIPTION PART NUMBER1 WD40 - 30 x 300 ml Aerosol Can - Smart Straw WD40300SS301 WD40 - 24 x 450 ml Aerosol Can - Smart Straw WD450SS242 WD40 - 12 x 600 ml Aerosol Can 44116
2
1 3
Consumables Cleaning
36www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
7850 Hand Cleaner with PumiceHand cleaner for severely stained hands, e.g. after vehicle repair• Contains extra-fi ne abrasives, which clean deep into pores.• With jojoba, lanolin and aloe for added skin conditioning and protection• Citrus extracts give a pleasant, fresh smell• Works with or without water• Tested for skin compatibility• Biodegradable, free of mineral oils
DESCRIPTION PART NUMBERHand cleaner (7850) 1 x 3 litre dispenser 8002012111Hand cleaner (7850) 4 x 3 litre dispenser 8002012
7063 Cleaner and DegreaserSolvent-based, general-purpose product for cleaning and degreasing of surfaces. It evaporates quickly, leaves no residue and is non-corroding.Applications: Removes oil, grease and dirt. Ideal for use prior to adhesive bonding and sealing applications
DESCRIPTION PART NUMBERAerosol cleaner (7063) 400ml 7063
GORILLA WipesPre-impregnated cleaning wipes designed primarily for use by anyone who needs a fast and effective hand cleaning product. No further need for dirty wet towels, messy liquid cleaners or water. This is a true all round multi purpose cleaning solution for most types of stains and dirt. They clean general grime, oil & water based paints, instant grab adhesives, silicone & acrylic sealants, PU foam, oil, tar, grease, permanent marker, glues. They will remove most dirt and grime without effecting old paint.Anti-bacterial formula kills 99.9% of harmful bacteria such as Ecoli, MRSA, Listeria, Salmonella and Weils disease
DESCRIPTION PART NUMBER80 of 20cm x 30cm Gorilla wipes GORILLA
Consumables Cleaning
36awww.mchc.ieCC O M P O N E NO M P O N E N T SC O M P O N E N T S
The wet wipes range has at its core the base material “Spunlace”, a soft, strong and mainly biodegradable material designed to release the pre-moistened lotions when required, at the same time as lifting liquid and grime to fi nish off the clean. Compare this to the vast majority of industrial wet wipes available in the marketplace today, derived from “Polypropylene”, that exhibit the tendency for lotions to sit on the surface of the wipe, rendering them less effective, and simply pushing around liquids of grime, resulting in frustration by the user, and taking longer to complete the wiping task.
Rough & Smooth and Smooth and Strong Wipes are all tested toBS EN 1276 (kills 99.9% of germs). BS EN 1276 is the European standard for the bactericadal activity of chemical disinfectants as proof of effective infection control against harmful micro-organisms such as MRSA, Salmonella, E. Coli, Flu Virus (H1N1) and Pseudomonas Aeruginosa
Rough & Smooth Heavy Duty WipesFeatures• Pre-moistened so no need for water • High strength for use on rougher surfaces• Dual-sided with micro-beaded side for agitating grime, smooth side for wiping away• Good absorbency with lquid spills and cleans faster • Skin-patch tested as safe to use on skin• Contains aloe vera for keeping hands moisturised • Conforms with EC1223/2009 Cosmetic Directive• Tested to BS EN 1276 (kills 99.9% of germs)Applications• Use on hands, tools, machinery and most surfaces • Mobile workers, construction trade, engineeringRemoves the following and more• Semi-cured silicone sealant and decorators caulk • Oils and greases • Adhesives • Water-based paints • Inks • Expanding foam • Dirt and grime
DESCRIPTION PART NUMBERPurple Tub of 80 wipes (wipe sizes 22cm x 20cm) T99005PR
Smooth & Strong Heavy Duty WipesFeatures• Pre-moistened so no need for water • Extra-large wipe size for greater volume wiping tasks• High drapability for effective cleaning of smallest cracks and surface imperfections• Medium strength for use on smoother surfaces • Good absorbency with liquid spills and cleans faster• Skin-patch tested as safe to use on skin • Contains aloe vera for keeping hands moisturized• Conforms with EC1223/2009 Cosmetic Directive • Tested to BS EN 1276 (kills 99.9% of germs)Applications• Use on hands, tools, machinery and most surfaces • Mobile workers, construction trade, engineeringRemoves the following and more• Fast removal of semi-cured silicone sealant and decorators caulk• Oils and greases • Adhesives • Water-based paints• Inks • Expanding foam • Dirt and grime
DESCRIPTION PART NUMBEROrange Tub of 80 wipes (wipe sizes 30cm x 20cm) T99006PR
Glass and Plastic Trade WipesFeatures• Dirteeze Hydrocell material for streak-free fi nish • One wipe cleans further• Low lint material does not leave fi bres • Fresh smellingApplications• Windows and other glass surfaces • UPVC window frames and other plastic surfaces• Ceramic tiles, porcelain tiles, linoleum
DESCRIPTION PART NUMBERGreen Tub of 80 wipes (wipe sizes 25cm x 20cm) T99007PR
Consumables Cleaning
36bwww.mchc.ieCC O M P O N E NO M P O N E N T SC O M P O N E N T S
Blue Paper Towel• 2 Layers• Honeycombed surface• 380 metre roll
DESCRIPTION PART NUMBERBlue paper towel 37cm x 380 metres PM2477
Trigger Spray Bottle - 500ml• Head: Polypropylene• Bottle: HDPE
DESCRIPTION PART NUMBER500ml Trigger spray bottle 5697000
Trigger Spray Bottle - 500ml - Heavy Duty• Heavy-duty trigger spray bottle crafted from low-density polyethylene• Suitable for liquids including water, chemicals, kerosene, fi ne oils and solvents that are compatible with LDPE• Hi-vis yellow colour ensures this trigger spray bottle is easy to spot• Nozzle adjustment setting so the spray angle can be set to wide or single jet• Height: 200mm• Width: 100mm
DESCRIPTION PART NUMBER500ml Trigger spray bottle - Heavy Duty 3225000
Bamboo Trade WipesFeatures• Outperforms polypropylene (plastic) wet wipes • Super absorbent with high lift on grime• Oeko-tex 100 certifi ed with no harmful substances • 100% biodegradable and from sustainable plants• Cosmetic approved, with zero recorded irritation on all skin types• Tested to BS EN 1276 (kills 99.9% of germs) Applications• Use on hands, tools, machinery and most surfaces • Mobile workers, construction trade, engineeringRemoves the following and more• Fast removal of semi-cured silicone sealant and decorators caulk• Oils and greases • Adhesives • Water-based paints• Inks • Expanding foam • Dirt and grime
DESCRIPTION PART NUMBERTub of 80 wipes (wipe sizes 26cm x 20cm) T99180PR
SUSTAINABLE
BA
MBOOSOURC
E
Consumables Cleaning
36cwww.mchc.ieCC O M P O N E NO M P O N E N T SC O M P O N E N T S
Mounting Supports to suit WT25The mounting supports are hot dip galvanized which helps prevent rust, salt corrosion and scratches.
Supplied complete with bolts and nuts for fi tting.
• Length: 455mm• Height: 82 / 158mm• Thickness: 3mm
DESCRIPTION PART NUMBERMounting support to suit WT25 (pair) WT25SUPPORT
Water Tank (25 Litre) with Soap Dispenser25 litre Water tank with tap and integrated soap dispenser that can easily be removed for refi lling. Suitable for mounting on slurry tankers, trailers and other farming and industrial machinery.
• Soap dispenser is suitable for alcohol based solutions• Tank made from non-toxic PE, enriched with anti-UV additive• Side tap (3/4”) to avoid possible impacts
• Width: 300mm• Depth: 495mm• Height: 303mm
DESCRIPTION PART NUMBER25 Litre water tank with soap dispenser WT25
Water tap
Removeable soap dispenser
Parts to suit WT25 Water TankDESCRIPTION PART NUMBERReplacement soap dispenser to suit WT25 water tank WT25SOAPReplacement tap to suit WT25 water tank WT25TAPCap to suit WT25 water tank WT25CAP
Consumables Oil
37www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Oil Spill GranulesTechnical Information:• Absorbent Granules, ideal for cleaning up Oil Spillage• Oil Absorption 51%• Water Absorption 64%• Calcium Carbonate and China Clay mix
DESCRIPTION PART NUMBER30 Litre Bag of Spilkleen Plus Granules WH9002
Chainsaw Bar OilBenefi ts: • Highly effective adhesive additive guarantees economic use • Good corrosion protection for all blank metal componentsApplication: • Modern, high-performance chain oil with special adhesive additive suitable for all brands of chainsawProperties: • Optimal full lubrication in summer and winter, including under more diffi cult usage conditions and for sawing hardwood • Additives to improve lubrication guarantee extremely low wear of chain and rails • No smoke generation, even under heavy loads
DESCRIPTION SIZE PART NUMBERChainsaw bar oil - 100 cst. 5 Litre 34005GP
Hydraulic Oil H46AWA superior grade hydraulic oil compatible with a wide range of hydraulic systems.Suitable for static industrial, mobile agricultural and earth moving machinery.Provides excellent anti-wear, anti-corrosion, anti-oxidant and anti-foam characteristics.• Suitable for most applications.• Superior anti-wear performance.• Compatible with other mineral hydraulic oils.• ISO cleanliness 15/12
DESCRIPTION SIZE PART NUMBERHydraulic oil H46AW 20 Litre H4620
Premium Quality Vacuum Pump OilA specially blended premium quality vacuum pump oil suitable for all makes of vacuum pumps. Designed to give the maximum protection against wear and corrosion giving extended pump life and improved effi ciency.• Inhibits oxidation• Anti-foaming• Protects against corrosion• Excellent anti-wear properties
DESCRIPTION SIZE PART NUMBER
Premium quality vacuum pump oil5 Litre VPO005
20 Litre VPO020
Consumables Body Fillers
38www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Plastic Padding - Chemical MetalThe original "Chemical Metal" is a rock hard multi purpose repair paste. Use on metal, wood, stone, glass, concrete etc. and for joining dissimilar materials. Thousands of uses on the car, boat, farm, in industry and around the home. Suitable for fi lling, trowelling, joining and sealing and allows machining, including tapping threads, after 20 minutes.Working time is 5 min and cure time is 20 min. Resistant to temperatures up to +160°C
DESCRIPTION PART NUMBER6 x 180ml Tin - chemical metal 2075534
Plastic Padding - Glass Fibre FillerA strong glass fi bre re-enforced fi ller for structural repairs and deep fi lling on glassfi bre. Impervious to water, it has a No-tack fi nish for easy sanding and fi nishing. Use for joining and sealing wood, fi breglass, steel and aluminium. It has a working time of 8 min, a curing time of 20 min and a maximum temperature resistance on steel of +160°C.
DESCRIPTION PART NUMBER6 x 180ml Tin - plastic padding - glass fi bre fi ller 2074744
Plastic Padding - Mixing BoardReusable mixing board made from strong, durable, easy to clean polypropylene
DESCRIPTION PART NUMBERPlastic Applicator (100) 2091150
Plastic Padding - Glass Fibre PasteBridges and fi lls big gaps/holes in one go. Contains glass fi bre strands for high tensile strength. Tack free fi nish allows easy removal of excess product.Finish with any plastic padding fi ller for a perfect repair
DESCRIPTION PART NUMBER6 x 750g Tin 0000015
Consumables Body Fillers
39www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Plastic Padding - Super Steel Epoxy-WeldThe amazing Epoxy weld for 1001 emergency repairs around the house, car, garden and boat. This product is a metal-fi lled, two-component adhesive which sets like steel and is suitable for metal, wood, china, stone, glass and leather. It hardens in 5 minutes and cures in 10 minutes and can tolerate temperatures up to +315°C.
DESCRIPTION PART NUMBER12 x 50g Blister Card 0000118
Consumables Rust Remedy / Cable Ties / Tape
40www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
LOCTITE® Rust Remedy (7503)Sandable Rust Converter is a single component rust treatment product for iron and steel, which dries at ambient temperature. The product is a synthetic latex in an aqueous solution, which converts rust (red) into a black stable complex and provides a protective coating to keep moisture and oxygen away from the surface. The dry coating is sandable, inhibits further corrosion and acts as a primer for subsequent painting with most known automotive paints
DESCRIPTION PART NUMBERRust Remedy (7503) 12 x 90ml 8781006
Insulating Tape• Sold per Roll
DESCRIPTION WIDTH ROLL LENGTH RED BLACK YELLOWInsulating tape 19mm 20 metres CIT20RED CIT20BLACK CIT20YELLOW
Cable TiesWIDTH LENGTH COLOUR PART NUMBER
2.5 100Black CT25100B
Orange CT25100ORAViolet CT25100VIO
3.6 140 Black CT36140B
3.6 200
Black CT36200BBlue CT36200BLU
Green CT36200GRERed CT36200RED
White CT36200WHIYellow CT36200YEL
4.8 200
Black CT48200BBlue CT48200BLU
Green CT48200GREOrange CT48200ORA
Red CT48200REDYellow CT48200YEL
4.8 300Black CT48300BWhite CT48300WHI
4.8 370 Black CT48370B7.6 200 Black CT76200B7.6 300 Black CT76300B7.6 370 Black CT76370B9.0 430 Black CT90430B9.0 776 Black CT90776B
Clamps, Ties & Tape Tape
41www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Masking Tape• Sold per ROLL
DESCRIPTION COLOUR WIDTH ROLLLENGTH
PART NUMBER
Masking tape Neutral 24mm 50 Metres 4413303Masking tape Neutral 36mm 50 Metres 4413304Masking tape Neutral 48mm 50 Metres 4413305
P.T.F.E Tape• Sold per ROLL
DESCRIPTION COLOUR WIDTH ROLLLENGTH
PARTNUMBER
P.T.F.E Sealing tape White 12mm 12 metres FG1000
Safety Grip Tape - Black• Sold per ROLL
DESCRIPTION COLOUR WIDTH ROLLLENGTH
PARTNUMBER
Safety grip tape Black 50mm 18.3 metres H3401
Silage Tape• Note: Sold in carton of 24, part number is for a single roll
WIDTH LENGTH DESCRIPTION PART NUMBERInch Yards
3" 20 Silage tape - black SILT01
Duck TapeDESCRIPTION COLOUR WIDTH ROLL
LENGTHPART NUMBER
Duck tape - box of 6 Silver 50 50 metres 5000402Duck tape - single roll Silver 50 50 metres 5000402111
Tyre Care Tube Patches / Chemicure Strips & Tools
42www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Chemicure Strips - for repairing Tubeless TyresDESCRIPTION SIZE PACK QTY PART NUMBERTyre repair string 200 x 3.5mm 80 24212Tyre repair string 300 x 3.5mm 40 24211Tyre repair string 200 x 6.0mm 40 24213
Round Patches• Tube Patches are sold per pack, 1 on an order will equal 1 pack
DESCRIPTION SIZE QTY PER PACK PART NUMBERNo.1 Patch 35mm 30 5000043No.2 Patch 45mm 30 5000050No.3 Patch 54mm 30 5000067No.4 Patch 75mm 30 5000081No.5 Patch 94mm 10 5000108No.6 Patch 116mm 10 5000122
Oval Patches• Tube Patches are sold per pack, 1 on an order will equal 1 pack
DESCRIPTION SIZE QTY PER PACK PART NUMBERNo.7 Patch 74 x 37mm 30 5000201No.7a Patch 90 x 45mm 30 5000225No.7b Patch 150 x 75mm 10 5000263
PATCHSIZE
Round Patches1 • •2 • •3 • • •4 • • •5 • •6 • •
Oval Patches7 • • • •
7a • • •7b • •7c • •
REMA - TIP TOP Patches
For the repair of Motorcycle, Car, Truck and Tractor Tyre Tubes
You can use the table provided to fi nd a suitable patch for your application.
Needle for applying Chemicure StripsTYPE DESCRIPTION PART NUMBER
A Small straight needle for 3.5mm chemicure strips 24215A Large straight needle for 3.5mm chemicure strips 24220B 'T' Shaped needle for 6mm chemicure strips 24226
A
B
Tyre Care Repair Patches for Cross PLY Tyres
43www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Repair Patches for Cross-PLY Tyres - PN SeriesRepair patches for the durable repair of cross-ply tyres of any size in accordance with the applications shown in the chart below.
DESIGNATION NUMBEROF PLIES
SIZE OF UNIT INTHREAD DIRECTION
PART NUMBER
PN03 2 100mm 5126037PN04 2 120mm 5126044PN05 4 160mm 5126051PN06 6 235mm 5126068
PN025 6 510mm 5126257
Guide for Tractors and CombinesC (MAX) PR
PLY RATING -6 8 - 10 12 - 14 16 - 18mm Inch25 1" PN Number 020 020 020 02050 2" PN Number 020 020 021 02375 3" PN Number 020 023 023 024
125 5" PN Number 021 024 024 025175 7" PN Number 022 025 025 -
Guide for Forklifts and Heavy Duty TrailersC (MAX) PR
PLY RATING -6 8 - 10 12 - 14 16 - 18mm Inch25 1" PN Number 040 041 042 04250 2" PN Number 040 041 042 -75 3" PN Number - 042 - -
Guide for Cars, Vans and TrucksC (MAX) PR
PLY RATING -4 6 - 8 10 - 12 14 - 16 18 - 20 22 - 24 -12 14 - 18 20 - 24mm Inch10 3/8" PN Number 02 02 03 03 04 04 02 03 0315 1/2" PN Number 03 03 04 04 05 05 02 03 0425 1" PN Number 03 04 05 06 06 06 03 04 0535 1 3/8" PN Number 04 04 05 06 07 07 03 04 0550 2" PN Number 05 05 06 07 08 08 05 05 0675 3" PN Number - - 07 07 09 09 06 06 07
100 4" PN Number - - 08 08 09 10 07 07 08125 5" PN Number - - - 10 10 - - 08 08
50%PN02 - 010 PN05S - 010S
for Sidewalls
Tyre Care Repair Patches for Radial Tyres
44www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Repair Patches for Radial Tyres - RAD 100 SeriesRepair patches for the durable repair of Radial tyres of any size in accordance with the applications shown in the chart below.
DESIGNATION NUMBER OF PLIES DIMENSIONS PART NUMBERRAD 184TL 3 295 x 215mm 5121843
RAD
Amm
Rmm
A/Cmm
Rmm
CØmm
Max. Max. Max
Car
Q6 12 110 TL 10 10 8
20 35 114 TL 20 20
T6 12 110 TL 8 8 6
15 30 112 TL 12 12H 6 6 110 TL 6 6 3V 3 3 110 TL 6 6 3
ZR 110 TL 3 3
Van 165 - 215 6 6 112 TL 6 66 - 8 PR 15 30 120 TL 15 15 8
2 AxleTruck
6.00 - 7.507 R - 8.5 R205/ - 255/
10 10 120 TL 10 10 815 60
122 TL 15 15 1020 5010 80
140 TL 25 40 1525 60
1 Cable 80124 TL
2 Cable 60
3 AxleTruck
8.25 - 10.00
9R - 11R11/
235/ - 285/
6 10 120 TL 10 10 810 80
140 TL 20 40 1520 6010 110
142 TL 30 50 2025 8020 130
144 TL 40 70 2540 80
125 TL 15 25135 TL 25 35145 TL 40 60
1 Cable 80124 TL
2 Cable 601 Cable 120
126 TL3 Cable 60
RAD
Amm
Rmm
A/Cmm
Rmm
CØmm
Max. Max. Max
3 AxleTruck
11.00 - 13.00
12 R - 15 R
12/ - 13/295/ - 365/
6 6 120 TL 8 8 610 60
140 TL 15 20 1015 3510 100
142 TL 25 50 2025 8020 130
144 TL 40 70 2540 80
125 TL 10 20135 TL 20 30145 TL 40 60
3 AxleTrailer
14.00 -16.5 R -15.5/ -385/ -
1 Cable 120126 TL
3 Cable 601 Cable 140
128 TL2 Cable 80
12 30 140TL 12 12 1010 100
142 TL 20 30 2020 6020 130
144 TL 30 50 2530 6040 100 146 TL 40 70 30
Forklift
5.00 - 7.5010 10 120 TL 10 15 510 50
122 TL 10 20 515 30
7.00 - 10.00
10 10 120 TL 10 10 510 70
140 TL 20 30 1020 5020 70
142 TL 25 35 1530 60
Tractor
8.3 - 12.48 - 11
20 20 120 TL 20 30 1050 70
180 TL 40 60 2570 5070 100
182 TL 70 90 45120 70
13.6 - 30.512 - 15
20 30 122 TL 20 30 1040 60
180 TL 30 50 2060 4070 100
182 TL 70 90 45100 7080 130
184 TL 90 110 60120 80100 160
186 TL 130 150 85160 100
C C ONon Repairable Area
AR
Tyre Care Solvents / Buffers / Repair Kits
45www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Vulcanising Fluid• For the vulcanisation of Tube patches, Rubber base valves and valve patches
DESCRIPTION PART NUMBERVulcanising fl uid 10g Tube 5059056Vulcanising fl uid 25g Tube 5059128Vulcanising fl uid 175g tin complete with brush 5059197
Liquid Buffer• Liquid Buffer is a solvent used to remove Silicones, Talcs and other mould release agents from the inside of the tyre prior to mechanical buffi ng
DESCRIPTION PART NUMBERLiquid buffer 500 ml aerosol 5050718
Special Cement BL• Accelerator solution for the application of PN and RAD repair patches
DESCRIPTION PART NUMBERSpecial cement 350g Tin 5150340
Repair KitsDESCRIPTION Cycle Outfi t TT-02 Outfi t TT-12 Outfi t TT-20 Outfi t TT-30SUITABLE FOR Push Bikes Cars & Trucks Trucks Tractors
CONTENTS 6 x F1 Patches1 x F2 Patch
1 x Emery paper1 x Valve
1 x 5g Tube Vulcanising Fluid
4 x No.1 Patches2 x No.2 Patches1 x No.3 Patch1 x No.4 Patch1 x No.7 Patch
1 x No.7a Patch1 x Rasp
1 x 13g Tube Vulcanising Fluid
8 x No.1 Patches2 x No.2 Patches1 x No.3 Patch1 x No.4 Patch1 x No.5 Patch1 x No.7 Patch
1 x No.7a Patch1 x No.7b Patch
3 x Rasps3 x Valve Cores
1 x 30g Tube Vulcanising Fluid
12 x No.1 Patches6 x No.3 Patch2 x No.4 Patch1 x No.5 Patch3 x No.7 Patch
4 x No.7a Patch2 x No.7b Patch
2 x Tyre Repair Units (PN03)
1 x Rasp with wooden handle
2 x Spare Rasps1 x Patch Stitcher
1 x 60g Tube Vulcanising Fluid
PART NUMBER 5060100 5060519 5060911 5070310
Tyre Care Valves / Valve Cores
46www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Car ValveDESCRIPTION LENGTH BASE DIA PART NUMBERCar valve TR15 38 60 5010150
Truck ValveDESCRIPTION LENGTH BASE DIA PART NUMBERTruck valve TR75A 95.5 90 5010318Truck valve TR78A 147.5 90 5010404
Air Water Valve• For the repair of Air / Water type Tractor Tubes
DESCRIPTION PART NUMBERAir water valves TR218A 5010277
Snap in Valves to suit Tubeless TyresDESCRIPTION LENGTH TO SUIT HOLE PART NUMBERValve TR414 48.5 11.5 5622555
Cranked ValveDESCRIPTION PART NUMBERS/O Valve type TR1175A 5622452
Valve CoresDESCRIPTION BOX QTY PART NUMBERBox of 5 - Valve core - Long (Car / Truck) 5 5620014
DESCRIPTION PART NUMBERAir / Water insert valve TR218 (for Standard. A.W. Valve) 5623042
DESCRIPTION PART NUMBERAir / Water insert valve TR218A (for New Fast Flow. A.W. Valve) 5623066
DESCRIPTION PART NUMBERValve core - Short (Car / Truck) 5620045
Tyre Care Valve Caps / Valve Tools / Tyre Levers
47www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Plastic Valve CapDESCRIPTION PART NUMBERPlastic cap (VC 8 eq) 5620296
Valve Core ScrewdriverDESCRIPTION PART NUMBERValve core screwdriver 5628085
Valve Repair Tool 4 Way• For the fi tting and removal of valve cores
OUTER THREAD SIZE INNER THREAD SIZE PART NUMBERVG 12 / VG 8 VG 5 5628023
Tyre LeversLENGTH DIAMETER PART NUMBER
30" 7/8" TTL3
LENGTH PART NUMBER19 1/2" TTL40
LENGTH PART NUMBER20" TTL95
LENGTH DIAMETER PART NUMBER34" 3/4" TTL1
Tyre Care Tyre Repair Tools / Chalk / Airline Gauges
48www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Marking ChalkDESCRIPTION PART NUMBERWhite marking chalk - Pack of 12 5950131
Hand RaspDESCRIPTION PART NUMBER4.5mm - Small hand rasp 59589376.5mm - Large hand rasp 5958944
Air Infl ator c/w Gauge• Pressure Range: 0-10 Bar (0-140 PSI)
DESCRIPTION PART NUMBERPistol grip infl ator c/w clip on connector & gauge 4288
AIRFORCE® MK4 Airline GaugeThe AIRFORCE® MK4 Tyre Infl ator is a robust and highly accurate, offering leading infl ation and defl ation rates and high performance for both indoor and outdoor applications. The redesigned piston and seal arrangement means increased accuracy - cycle tests now give over 400,000 infl ation cycles at 100% accuracy
Complies to: EC 86/217, EN12645:2014Reading Accuracy: 0.1 bar / 2 psiMaximum Inlet Pressure: 13.8 bar / 200 psiInfl ation Flow: 500 l/min / 18 cfmOperating Temperature: -25 to 55 °C
DESCRIPTION PART NUMBERAirforce MK4 Airline Gauge PCLGUN
Supplied in hang pack carton
Holder / Wire Rack
49www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
GRIP-ON Wire RackMetallic wire rack for displaying a combination of 48 fast moving tools presented in GRIP-ON’s unique display cards.
DESCRIPTION PART NUMBERGRIP-ON wire rack - holds 48 fast moving tools GOSTAND
Tools®
GRIP-ON HoldersDesigned with special slot - fi rmly holds tools converting them into a versatile Portable Vice. The swivel pad ensures fi rm hold on all work pieces and the butterfl y screw makes for easy adjustment.
DESCRIPTION PART NUMBERGRIP-ON Holder to suit 10" Tools GO10GHGRIP-ON Multi-holder to suit 5", 6", 7" and 10" Tools GOMGH
Tools Calipers / Wear Measuring Tool
50www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Metric / Imperial Digital Calipers• Supplied in protective case• Includes battery• Clear LCD display with Zero switch
DESCRIPTION PART NUMBERMetric / Imperial digital calipers in protective case ME150EReplacement Battery to suit ME150B
Supplied inprotective case
Trailer Hitch Wear Measuring Tool• Universal inspection tool to check the wear limit of pin-or ball couplings and towing eyes
DESCRIPTION PART NUMBERWear measuring tool 8004932
Tools Spanners
50awww.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Double Open Ended Spanner• Different size on each end• DIN 3110• Chrome-Vanadium
SIZE PART NUMBER20 + 22mm H8652022
Combination Spanner• Ring end 15º offset• Both ends the same size• DIN 3113• Chrome-Vanadium
SIZE PART NUMBER14mm H12201432mm H122032
Double Offset Ring Spanner• Different size on each end• DIN 838• Chrome-Vanadium
SIZE PART NUMBER20 + 22mm H811202230 + 32mm H8113032
Tools Knife / Drill Bits
50cwww.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Drill Bits• Polished HSS Spiral Drill Bits• For Steel and Cast Iron• Produced to DIN Standard
DIAMETER(mm)
LENGTH(mm)
PART NUMBER
9.5 125 MB09511.5 142 MB11512.5 151 MB125
Retractable Utility Knife Display Pack (12 Knives)• Blade change: quick release for easy exchange of blades• Pop up blade dispenser release button allows instant blade change• Hold 5 additional high carbon SK2 blades inside the pop up dispenser• Thermoplastic rubber (TPR) soft grip offers thumb rest, comfortable use with less slippageNote: Sold in display pack of 12 only. Part Number is for a box of 12 knifes
DESCRIPTION PART NUMBERDisplay pack of 12 Utility Knives T54001-12
Thermoplasticrubber grip
Quick bladechange
Pop up bladedispenser
Tools Grinding / Cutting Discs
50dwww.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Grinding DiscsSold in boxes of 10
SIZE THICKNESS CENTRE DESCRIPTION TYPE SUITABLE FOR PART NUMBER9" 6.0mm 7/8" Depressed Centre Steel / Stainless Steel 222865
Cutting DiscsSold in boxes of 25
SIZE THICKNESS CENTRE DESCRIPTION TYPE SUITABLE FOR PART NUMBER
12"3.5mm 7/8" Flat Steel Only 2230373.5mm 1" Flat Steel Only 223039
Tools Wire Brush / Toolboxes / Bottle Jacks / Axle Stands
51www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Vehicle Mounting Tool Box• Length 370mm• Width 150mm• Height 140mm
DESCRIPTION PART NUMBERPVC Tool Box H123005
Wire Brush• Industrial wire brush with wooden handle• Length 310mm• 0.35mm wire in 16 x 4 rows
DESCRIPTION PART NUMBERWire Brush 644
Axle Stands (Supplied in Pairs)Compact axle stands are ideal for supporting vehicles such as cars, lorries, buses and agricultural machines.• Detachable gear rack for safe stop and fast adjustment• Spring-loaded pawl prevents unintentional release• Stable, welded steel construction• Observe maximum load capacity of the axle stands
DESCRIPTION CAPACITY PART NUMBERPair of 3 Ton axle stands 3 Ton 0259360Pair of 6 Ton axle stands 6 Ton 0259366
Bottle Jacks• Low pumping force facilitates work in diffi cult positions• Also permits work in a horizontal direction• Fitted with safety valve• All Bottle Jacks Conform To Safety Standards
HEIGHT STROKE CAPACITY PART NUMBERMIN MAX228 457 152 8 Ton BJ8240 465 153 12 Ton BJ12242 452 153 20 Ton BJ20
Terminals & Connectors c/w Pliers• Supplied in plastic case• Contains pliers for crimping, cutting and stripping
CONTAINS THE FOLLOWING PART NUMBERTerminal Pliers and the following terminals / connectors
LAA1000
10 x LA9195 10 x LA9035 10 x LA910510 x LA9015 10 x LA9145 10 x LA912010 x LA9065 10 x LA9075 10 x LA914010 x LA9090 10 x LA9025 5 x LA915510 x LA9125 10 x LA9030 5 x LA90705 x LA9055 5 x LA9020
The complete listing of Terminals and Connectors is shown in our Tractor & Trailer Catalogue
Tools Booster Cables
54www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Replacement Parts to suit Booster cablesDESCRIPTION PART NUMBERHeavy duty battery clamps (set of 2 in display pack) MP340
Booster CablesSupplied in display pack
CABLE SIZE LENGTH STARTING LOAD PART NUMBER25mm 3.5 metre 350 Amp GS253535mm 4.5 metre 450 Amp GS3545
Tools Lashings / Winches
55www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Trailer Winch• With safety ratchets• Fully zinc plated with precision made solid gear design• CE Approved
WORKCAPACITY
BREAKINGCAPACITY
GEARRATIO
STRAPINCLUDED
PART NUMBER
250 Kg 720 Kg 1:3 Yes MP7971500 Kg 1500 Kg 1:4 No MP7974
STRAP TO SUIT PART NUMBER7 metre Polyester Winch Strap MP109
Ratchet Type Loadbinder to suit 10mm chainThey are used for restraining loads on lorries, vans and trailers. They can be used in conjunction with standard loadbinders, ratchet type load binders, turnbuckles and commercial shackles.
DESCRIPTION PART NUMBERLoadbinder - Ratchet Type LBR10
Chain to suit Loadbinder is available to order. Contact a member of our Sales Staff with your inquiry.
Cargo Straps / Ratchet LashingsRatchet lashings are manufactured from 100% polyester webbing with zinc plated hooks and ratchets. They are used for restraining loads on lorries, vans and trailers
WIDTH LENGTH PART NUMBER25mm 5 metres TS2025A50mm 8 metres TS2050B50mm 10 metres TS2050C50mm 12 metres TS2050G
Note: Additional lengths are available upon request
CERTIFIEDEach strap has acertifi cation label
Tools PTO Compressor
56www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
C2 Compressor Spare PartsNO DESCRIPTION QTY PART
NUMBER1 Coupling with grub-screw 1 N.L.A.2 Ball bearing 1 62043 Spacer 1 N.L.A.4 Ball bearing 1 6204ZZ5 Crank Shaft 1 N.L.A.6 Roller bearing NKG 10/20A 1 E52067 Oil feeder 1 E62668 Compressor body 1 N.L.A.9 Pressure gauge 1 E6664
10 Complete chain 1 N.L.A.11 Hose connection with nut 1 N.L.A.12 Safety valve 1 E666913 Name plate elomatic 1 N.L.A.14 Spiral hose 1 N.L.A.15 Infl ating tyre connection 1 N.L.A.16 Gasket with valve 2 N.L.A.17 Piston 1 E726418 Scraper ring 2 E520719 Piston ring 4 N.L.A.20 Cylinder Head 2 N.L.A.21 Chain with hook 1 E606622 Screw TE M8 x 30 8 N.L.A.23 Washer 8.5 x 17 x 1.5 2 N.L.A.
1 2 3 4 5 6 7 8 9
22 23
21
1113
10
12
20 19 18 17 16 14
15
Air & Water Fittings One Touch Push In Fittings
57www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Push-InHose Connectors
TO SUITTUBE
TO SUITTUBE
StraightConnector
90ºConnector
' T 'Connector
' Y 'Connector
' X 'Connector
4mm 4mm PUC04PI PUL04PI PUT04PI PY04PI PZA04PI6mm 6mm PUC06PI PUL06PI PUT06PI PY06PI PZA06PI8mm 8mm PUC08PI PUL08PI PUT08PI PY08PI PZA08PI
10mm 10mm PUC10PI PUL10PI PUT10PI PY10PI PZA10PI12mm 12mm PUC12PI PUL12PI PUT12PI PY12PI PZA12PI14mm 14mm PUC14PI PUL14PI PUT14PI PY14PI -16mm 16mm - PUL16PI PUT16PI PY16PI -
Push-InStraight Reducer
TO SUITTUBE
TO SUITTUBE
StraightReducer
6mm 4mm PG06-04PI8mm 4mm PG08-04PI8mm 6mm PG08-06PI
10mm 6mm PG10-06PI10mm 8mm PG10-08PI12mm 8mm PG12-08PI12mm 10mm PG12-10PI
Push-In / Plug-InStraight Reducer
TO SUITTUBE
TO SUITTUBE
StraightReducer
6mm 4mm PGJ06-04PI8mm 4mm PGJ08-04PI8mm 6mm PGJ08-06PI
10mm 6mm PGJ10-06PI10mm 8mm PGJ10-08PI12mm 8mm PGJ12-08PI12mm 10mm PGJ12-10PI
One Touch Push Fittings• Convenient One touch fi ttings provide instant tubing connections• Elliptical release ring facilitates pneumatic installations in confi ned spaces• Light manual pressure on the elliptical release ring is all that is required to instantly disconnect each tube, no tools required.• Nickel-plated brass threaded bodies ensures anti-corrosion and anti-contamination.• All NPT & R(BSPT) thread are pre-coated with Tefl on sealant and require no additional sealing.
Metal Push-InHose Connectors
TO SUITTUBE
TO SUITTUBE
StraightConnector
' T 'Connector
4mm 4mm PM04PI MPE04PI5mm 5mm PM05PI -6mm 6mm PM06PI MPE06PI8mm 8mm PM08PI MPE08PI
10mm 10mm PM10PI MPE10PI12mm 12mm PM12PI MPE12PI14mm 14mm PM14PI -
Air & Water Fittings One Touch Push In Fittings
58www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Push-In / Threaded 90º and Banjo
TO SUITTUBE
TO SUITTHREAD
90ºBSPT Thread
90ºBSPP Thread
90º BanjoBSPT Thread
90º BanjoBSPP Thread
4mm 1/8" PL04-01PI PL04-G01PI PH04-01PI PH04-G01PI6mm 1/8" PL06-01PI PL06-G01PI PH06-01PI PH06-G01PI6mm 1/4" PL06-02PI PL06-G02PI PH06-02PI PH06-G02PI8mm 1/4" PL08-02PI PL08-G02PI PH08-02PI PH08-G02PI8mm 3/8" PL08-03PI PL08-G03PI PH08-03PI PH08-G03PI
10mm 1/4" PL10-02PI PL10-G02PI PH10-02PI PH10-G02PI10mm 3/8" PL10-03PI PL10-G03PI PH10-03PI PH10-G03PI12mm 1/4" PL12-02PI PL12-G02PI PH12-02PI PH12-G02PI12mm 3/8" PL12-03PI PL12-G03PI PH12-03PI PH12-G03PI
Push-In / Threaded Male 'T' Branch
TO SUITTUBE
TO SUITTHREAD
' T ' BranchBSPT Thread
4mm 1/4" PT04-02PI6mm 1/4" PT06-02PI6mm 3/8" PT06-03PI6mm 1/2" PT06-04PI8mm 1/4" PT08-02PI8mm 3/8" PT08-03PI8mm 1/2" PT08-04PI
10mm 1/4" PT10-02PI10mm 3/8" PT10-03PI10mm 1/2" PT10-04PI12mm 1/8" PT12-02PI12mm 3/8" PT12-03PI12mm 1/2" PT12-04PI
Push-InON / OFF Valve
TO SUITTUBE
TO SUITTUBE
ON / OFFValve
4mm 4mm HVFF04PI6mm 6mm HVFF06PI8mm 8mm HVFF08PI
10mm 10mm HVFF10PI12mm 12mm HVFF12PI
Push-In / Threaded Straight
TO SUITTUBE
TO SUITTHREAD
Straight MaleBSPT Thread
Straight MaleBSPP Thread
Straight FemaleBSPT Thread
Straight FemaleBSPP Thread
4mm 1/8" PC04-01PI PC04-G01PI PCF04-01PI PCF04-G01PI6mm 1/8" PC06-01PI PC06-G01PI PCF06-01PI PCF06-G01PI6mm 1/4" PC06-02PI PC06-G02PI PCF06-02PI PCF06-G02PI8mm 1/4" PC08-02PI PC08-G02PI PCF08-02PI PCF08-G02PI8mm 3/8" PC08-03PI PC08-G03PI PCF08-03PI PCF08-G03PI
10mm 1/4" PC10-02PI PC10-G02PI PCF10-02PI PCF10-G02PI10mm 3/8" PC10-03PI PC10-G03PI PCF10-03PI PCF10-G03PI12mm 1/4" PC12-02PI PC12-G02PI PCF12-02PI PCF12-G02PI12mm 3/8" PC12-03PI PC12-G03PI PCF12-03PI PCF12-G03PI
Air & Water Fittings One Touch Push In Fittings / Tubing
59www.mchc.ieCC O M P O N E NO M P O N E N T SC O M P O N E N T S
Nylon-TubePA6• Suitable for Oil
TUBEOD
BLACKPA6
CLEARPA6
4mm NY604BPI NY604CPI6mm NY606BPI NY606CPI8mm NY608BPI NY608CPI10mm NY610BPI NY610CPI12mm NY612BPI NY612CPI14mm NY614BPI NY614CPI
Polyurethane Pipe• Suitable for Air
TUBEOD
BLUE
4mm PU04BEPI6mm PU06BEPI8mm PU08BEPI
10mm PU10BEPI12mm PU12BEPI14mm PU14BEPI
Push-In / Threaded 90º SpeedController
TO SUITTUBE
TO SUITTHREAD
90º ControllerBSPT Thread
90º ControllerBSPP Thread
4mm 1/8" NSE04-01PI NSE04-G01PI6mm 1/8" NSE06-01PI NSE06-G01PI6mm 1/4" NSE06-02PI NSE06-G02PI8mm 1/4" NSE08-02PI NSE08-G02PI8mm 3/8" NSE08-03PI NSE08-G03PI10mm 1/4" NSE10-02PI NSE10-G02PI10mm 3/8" NSE10-03PI NSE10-G03PI12mm 1/4" NSE12-02PI NSE12-G02PI12mm 3/8" NSE12-03PI NSE12-G03PI
Push-InStraight Speed Controller
TO SUITTUBE
TO SUITTUBE
SpeedController
4mm 4mm NSF04PI6mm 6mm NSF06PI8mm 8mm NSF08PI
10mm 10mm NSF10PI12mm 12mm NSF12PI
TO SUITTUBE
TO SUITTHREAD
SpeedController
6mm 1/4" BSPT NSFSF06-02PI
Air & Water Fittings Claw Couplings
60www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Claw Couplingwith Hosetail• Pneumatic Fitting• DIN 3489• 42mm interlock
HOSETAIL SIZE PART NUMBER1/2" CLAW05135/8" CLAW05163/4" CLAW0519 1" CLAW0525
Claw CouplingBlanking Plug• Pneumatic Fitting• DIN 3489• 42mm interlock
DESCRIPTION PART NUMBERClaw coupling blank plug CLAW04
Claw CouplingFemale Thread• Pneumatic Fitting• DIN 3489• 42mm interlock
THREAD SIZE PART NUMBER1/2" BSP CLAW01083/4" BSP CLAW0112 1" BSP CLAW0116
Claw CouplingMale Thread• Pneumatic Fitting• DIN 3489• 42mm interlock
THREAD SIZE PART NUMBER1/2" BSP CLAW02083/4" BSP CLAW0212 1" BSP CLAW0216
Claw CouplingHouse Clamp• Pneumatic Fitting• DIN 3489• 42mm interlock
TO SUIT HOSE PART NUMBER22 - 29mm CLAW0402202928 - 34mm CLAW0402803432 - 40mm CLAW04032040
Seal to suitClaw Coupling• Pneumatic Fitting• DIN 3489• 42mm interlock
DESCRIPTION PART NUMBERSeal to suit claw coupling CLAWSEAL
Air & Water Fittings eSafe Couplings
60awww.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
eSafeAdaptors withThread Connection
THREAD ADAPTOR WITHMALE THREAD
ADAPTOR WITHFEMALE THREAD
1/4" C5152 C52023/8" C5154 C52041/2" C5155 C5205
eSafe Air Couplings - Series 320 (DN 7.6)• Vented safety function eliminates risk of hose whip or recoil• Higher fl ow rates with lower restrictions enable a more effi cient use of compressor• Strong and durable
eSafe Series 320 coupling is an easy-to-handle high performing coupling with a long service life. eSafe is a one hand operated safety coupling that vents before disconnection eliminating the risk of hose whip. Male threads on the couplings and nipples feature pre-applied thread sealant. The couplings have a smaller outside dimension than comparable designs. Full automatic operation ensures easy handling. eSafe complies with ISO Standard 4414 and EN 983.
Technical dataNominal fl ow diameter: 7.6 mm (5/16”)Air fl ow: 2250 l/min (79.4 CFM)Max. working pressure: 16 bar (232 PSI)Min. burst pressure: 140 bar (2030 PSI)Connection force: 86 NTemperature range: -20°C — +100°C (-4°F — +212°F)Material coupling: Zinc-plated steel/brassMaterial nipple: Hardened zinc-plated steelStandards: CEJN Original, Eurostandard 7.4 mm
eSafeCouplings withThread Connection
THREAD COUPLING WITHMALE THREAD
COUPLING WITHFEMALE THREAD
1/4" C2152 C22023/8" C2154 C22041/2" C2155 C2205
eSafeAdaptors withTailpiece
TAILPIECETO SUIT HOSE
ADAPTOR WITHTAILPIECE
5/16" C50033/8" C50041/2" C5005
Air & Water Fittings Air Couplings
61www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
60' Series - Air Line Couplings & AdaptorsThe 60' Series is designed for general industrial applications• Free fl ow rate at 7bar (100lbf/in2)• 55 to 60ft 3/min• 1557 to 1697 Litres/min
Coupling Body with Female Thread DESCRIPTION PART NUMBERCoupling Body with 1/4" BSP Female Thread - Taper 14160Coupling Body with 1/2" BSP Female Thread - Taper 12060
Integral Adaptor / TailpieceDESCRIPTION PART NUMBERIntegral Adaptor with 1/2" Tailpiece 12160
Male Threaded AdaptorDESCRIPTION PART NUMBERAdaptor with 1/4" BSP Male Thread - Taper 14260
Airfl ow CouplingsA popular coupling for use with portable air tools, garage and industrial air line systems and test panels• Free fl ow rate at 7bar (100lbf/in2)• 35 to 42ft 3/min• 991 to 1133 Litres/min
Coupling Body with Female Thread DESCRIPTION PART NUMBERCoupling Body with 1/4" BSP Female Thread - Taper 141Coupling Body with 3/8" BSP Female Thread - Taper 14138
Coupling Body with Male Thread DESCRIPTION PART NUMBERCoupling Body with 1/4" BSP Male Thread - Taper 143Coupling Body with 3/8" BSP Male Thread - Taper 383
Standard Air Line Couplings
Hose Tail with Male Thread DESCRIPTION PART NUMBER3/8" Hose Tail with 1/4" BSP Thread - Taper 14381/2" Hose Tail with 1/4" BSP Thread - Taper 14123/8" Hose Tail with 3/8" BSP Thread - Taper 3838
Air & Water Fittings Air Couplings / Air Guns
62www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Air Tyre Infl atorPistol-grip with Dial Gauge (0-10 Bar or 0-140 PSI) and clip-on connector. Ideal for the hobbyist and professional user. Suitable for use with motor vehicles, cycles, dinghies, etc.
DESCRIPTION PART NUMBERAir Tyre Infl ator with Dial Gauge 4288
Pistol Type Air Blow GunSuitable for cleaning liquid, swarf or dust during manufacture or assembly. Supplied complete with two nozzles - Standard (single hole) and Pepperpot (multi-hole)
DESCRIPTION PART NUMBERPistol Type Air Blow Gun with 1/4" BSP Female Thread K4
Male Threaded AdaptorDESCRIPTION PART NUMBERAdaptor with 1/4" BSP Male Thread - Taper 142
Integral Adaptor / TailpieceDESCRIPTION PART NUMBERIntegral Adaptor with 5/16" Tailpiece 5161Integral Adaptor with 3/8" Tailpiece 381
PCL Standard AdaptorsCase hardened for longer life
Female Threaded AdaptorDESCRIPTION PART NUMBERAdaptor with 1/4" BSP Female Thread - Taper 144
AIRFORCE® MK4 Airline GaugeThe AIRFORCE® MK4 Tyre Infl ator is a robust and highly accurate, offering leading infl ation and defl ation rates and high performance for both indoor and outdoor applications. The redesigned piston and seal arrangement means increased accuracy - cycle tests now give over 400,000 infl ation cycles at 100% accuracy
Complies to: EC 86/217, EN12645:2014Reading Accuracy: 0.1 bar / 2 psiMaximum Inlet Pressure: 13.8 bar / 200 psiInfl ation Flow: 500 l/min / 18 cfmOperating Temperature: -25 to 55 °C
DESCRIPTION PART NUMBERAirforce MK4 Airline Gauge PCLGUN
Supplied in hang pack carton
Air & Water Fittings Air / Water Hose
63www.mchc.ieCC O M P O N E NO M P O N E N T SC O M P O N E N T S
AgripresTemperature Range: -10ºC to +60ºCDescription: PVC hose with polyester yarn reinforcementApplications: Agriculture, Industrial, Construction, and Transport.
I.Dmm
O.D.mm
WEIGHTPER METER
WORKINGPRESSURE
BURSTINGPRESSURE
ROLLLENGTH
PART NUMBER
8 13 110g 20 bar 60 bar 100 814B10 15 130g 20 bar 60 bar 100 1015B13 19 200g 20 bar 60 bar 100 1319B
AIR WATER SPRAYER
Espiroaspersion - PVC Water HoseTemperature Range: -10ºC to +60ºCDescription: Soft PVC hose reinforced by a polyester mesh for water delivery in fl ower growing and agriculture.Applications: Agriculture, Gardening, Industrial, Construction, Marine and Home.Advantages: Good resistance to abrasion and sudden temperature changes. Excellent weather resistance. High visibility even in very low light conditions. Resistant to atmospheric and chemical products.
I.D(mm)
O.D.(mm)
WEIGHTPER METER
WORKINGPRESSURE (20ºC)
BURSTINGPRESSURE (20ºC)
ROLLLENGTH
PART NUMBER
12 16 110g 8 bar 24 bar 50 metres 131215 19 135g 8 bar 24 bar 50 metres 161219 23 200g 8 bar 24 bar 50 metres 191225 32 550g 7 bar 21 bar 50 metres 2512
WATER
Air HoseTemperature Range: -10ºC to +60ºCDescription: SBR blended with black wrapped surface, textile braided high tensile synthetic yarn. Weather and ozone resistant.Applications: Compressed air
I.Dmm
O.D.mm
WEIGHTPER METER
WORKINGPRESSURE
BURSTINGPRESSURE
ROLLLENGTH
PART NUMBER
19 29 490g 20 bar 60 bar 50 1918B25 36 670g 20 bar 45 bar 50 2515B
AIR
Air & Water Fittings Air / Water Hose
64www.mchc.ieCC O M P O N E NO M P O N E N T SC O M P O N E N T S
Mallatrans Hose (Food Quality)Temperature: -10ºC to +60ºC.Description: PVC transparent hose with polyester yarn reinforcement, for delivery of water, cooling fl uids, chemical solutions, food and compressed air.Applications: Agriculture, Industrial, Construction, Marine, Transport and Home.Advantages: Lightweight and very fl exible. Resistant to weather conditions.
I.D(mm)
O.D.(mm)
WEIGHT WORKINGPRESSURE
BURSTINGPRESSURE
ROLLLENGTH
PART NUMBER
6 12 110 gr/mtr 15 bar 45 bar 50 metres 6128 14 130 gr/mtr 15 bar 45 bar 50 metres 813
10 16 155 gr/mtr 15 bar 45 bar 50 metres 101512 18 180 gr/mtr 15 bar 45 bar 50 metres 131816 22 225 gr/mtr 15 bar 45 bar 50 metres 162119 26 315 gr/mtr 10 bar 30 bar 50 metres 192525 33 455 gr/mtr 10 bar 30 bar 50 metres 253232 42 725 gr/mtr 7 bar 21 bar 50 metres 324238 48 835 gr/mtr 6 bar 18 bar 50 metres 384850 60 1075 gr/mtr 5 bar 15 bar 25 metres 5060H
AIR WATER FOOD
General Purpose Hose - Bursting Pressure 60 barTemperature Range: -40ºC to +100ºCDescription: Synthetic rubber hose, textile spiral construction. Highly fl exible and weather resistantApplications: Suitable for mineral oils and fuels with a maximum aromatic content of 40%, air and waterPlease Note: Hose is sold in 50 metre rolls only
I.Dmm
O.D.mm
WEIGHTPER METER
WORKINGPRESSURE
MIN. BURSTINGPRESSURE
ROLLLENGTH
PART NUMBER
6 12 150g 20 bar 60 bar 50 metres GP60068 15 200g 20 bar 60 bar 50 metres GP6008
10 17 220g 20 bar 60 bar 50 metres GP601013 20 300g 20 bar 60 bar 50 metres GP601316 24 400g 20 bar 60 bar 50 metres GP601619 28 500g 20 bar 60 bar 50 metres GP601925 35 730g 20 bar 60 bar 50 metres GP6025
DIESEL
DOIL AIR WATER
Air & Water Fittings GEKA Fittings
65www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
GEKA Type Hose End CouplingDESCRIPTION HOSE TAIL SIZE PART NUMBERHose End Coupling - GEKA Type 3/8" 217149Hose End Coupling - GEKA Type 1/2" 217150Hose End Coupling - GEKA Type 5/8" 217156Hose End Coupling - GEKA Type 3/4" 217151Hose End Coupling - GEKA Type 1" 217152Hose End Coupling - GEKA Type 1 1/4" 217153Hose End Coupling - GEKA Type 1 1/2" 217154
GEKA Type Female CouplingDESCRIPTION THREAD SIZE PART NUMBERFemale Coupling - GEKA Type 3/8" 217157Female Coupling - GEKA Type 1/2" 217158Female Coupling - GEKA Type 3/4" 217159Female Coupling - GEKA Type 1" 217160Female Coupling - GEKA Type 1 1/4" 217161Female Coupling - GEKA Type 1 1/2" 217162
GEKA Type Male CouplingDESCRIPTION THREAD SIZE PART NUMBERMale Coupling - GEKA Type 3/8" 217164Male Coupling - GEKA Type 1/2" 217165Male Coupling - GEKA Type 3/4" 217166Male Coupling - GEKA Type 1" 217167Male Coupling - GEKA Type 1 1/4" 217168Male Coupling - GEKA Type 1 1/2" 217169
GEKA Type 'Y' AdaptorDESCRIPTION PART NUMBER'Y' Adaptor - GEKA Type 217170
GEKA Type Blanking CapDESCRIPTION PART NUMBERBlanking Cap - GEKA Type 217171
GEKA Type Sealing RingDESCRIPTION PART NUMBERSealing Ring - GEKA Type 217190
Air & Water Fittings Brass Fittings
66www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Spray Nozzle with Insert NippleDESCRIPTION PART NUMBERSpray Nozzle WK33091Rubber O' Ring to suit 2621078OR
Insert Nipple with Hose ConnectionDESCRIPTION HOSE SIZE PART NUMBERInsert Nipple with Hose Connection 1/2" WK33021Insert Nipple with Hose Connection 3/4" WK33022Rubber O' Ring to suit 2621078OR
Coupling with Hose ConnectionDESCRIPTION HOSE SIZE PART NUMBERCoupling with Hose Connection 1/2" WK33031Coupling with Hose Connection 3/4" WK33032
Nipple with Female Threaded EndDESCRIPTION THREAD SIZE PART NUMBERInsert Nipple with Female Threaded End 1/2" WK33121Insert Nipple with Female Threaded End 3/4" WK33122Insert Nipple with Female Threaded End 1" WK33123Rubber O' Ring to suit 2621078OR
Nipple with Male Threaded EndDESCRIPTION THREAD SIZE PART NUMBERInsert Nipple with Male Threaded End 1/2" WK33221Insert Nipple with Male Threaded End 3/4" WK33222Rubber O' Ring to suit 2621078OR
Coupling with Hose Connection c/w ValveDESCRIPTION HOSE SIZE PART NUMBERCoupling with Connection & Valve 1/2" WK33041
Air & Water Fittings Brass Fittings / Water Guns
67www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
2-Way Insert NippleDESCRIPTION PART NUMBER2-Way Insert Nipple WK33051Rubber O' Ring to suit 2621078OR
3-Way Insert NippleDESCRIPTION PART NUMBER3-Way Insert Nipple WK33052Rubber O' Ring to suit 2621078OR
Hose ConnectionDESCRIPTION HOSE SIZE PART NUMBER
Hose Connection 1/2" WK33321
Water GunsDESCRIPTION PART NUMBERStandard 3/4" BSP water gun trigger spray WG1Heavy Duty 1/2" BSP water gun trigger spray WG2Hosetail to suit WG2 - 1/2" BSP x 13mm hosetail BRASSHT1213
Hydraulic Hose Machines
68www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Hose Cutting
EM3 Ecoline Hose Cutting MachineStrong and robust, meeting CE safety standards for operator protection.Cutting Range: 1-2 wire 1 1/4", 4 wire 1"Drive: Electric MotorCutting Blade: 200 x 1.6 x 30mm or 200 x 1.6 x 25.4mmDimensions (LxWxH): 400 x 510 x 540mmWeight: 20 Kg
DESCRIPTION POWER PART NUMBERHose cutting machine 220V 1.8kW EM31PHECOLINE
Replacement blade - 30mm centre (pre 2011) TMG2001630Replacement blade - 25.4mm centre (from 2011) TMG20016254
Hydraulic Hose Machines
69www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Hose Swaging
S2MH Manual Swaging Machine• Ideal for mobile or workshop crimping• Supplied with 8 Dies sets
Crimp Force: 900 kN / 90 TonAdvantage: Slide bearings on the crimp tool,
no service and 20% less frictionWorking Range: 2 wire up to 1 1/4"
4 wire up to 1"Dies Supplied: 14, 17, 20, 24, 28, 32, 36 and 40mmOpening: +22mmOpening without Dies: 77mmOil: 0.75 (litres)Dimensions (LxWxH): 170 x 220 x 330mmWeight: 31 Kg
DESCRIPTION POWER PART NUMBERManual swaging machine Manual S2MH
Includes
8Die Sets
Hose SwagingHydraulic Hose Machines
70www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Die Locator Pin Set to suit HM200 & HM200 EcolineDESCRIPTION PINS PER SET PART NUMBER
Replacement die locator pin set to suit HM200 8 239041SW
x 8
Hydraulic Hose Machines
71www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Hose Swaging
Supplied with Quick Die Change SystemThe Quick Die Change System and Die Holder whichallows you to easily swap a full set of Dies in seconds.
S8 Swaging MachineCrimp Force: 2200 kN / 220 TonNo Grease 20% less friction: YesWorking Range: 1 & 2 Wire up to 2", 4 Wire up to 1 1/2"Industrial: 4"Opening: +45mmOpening without dies: 190mmSpeed (mm/sec) Close / Crimp / Open: 6.1 / 1.7 / 10.3Oil: 55 lDimensions (LxWxH): 690 x 600 x 1400mmDies Supplied: 17, 20, 24, 28, 32, 36, 44 and 50mmWeight 390 Kg
DESCRIPTION POWER PART NUMBERSwaging Machine 3 Phase S8
The company UNIFLEX-Hydraulik GmbH was established by the engineer Peter Schröck in Frankfurt/Main in 1972. Based on its trailblazing innovations and high-quality products, it quickly grew into a leading supplier of machines used for producing hose assemblies.
Based on its years of cooperation with many manufacturers of hose assemblies, UNIFLEX has developed a comprehensive program of machines designed for producing hose assemblies. It provides cutting machines, presses, testing systems and cleaning machines. In this way, UNIFLEX has become an innovative system supplier – from workshop equipment to production plants.
S4 & S4 Ecoline Swaging MachinesS4 S4 ECOLINE
Crimp Force: 1800 kN / 180 Ton 1800 kN / 180 TonNo Grease 20% less friction: Yes YesWorking Range: 1 & 2 Wire up to 2"
4 Wire up to 1 1/2"1 & 2 Wire up to 2"4 Wire up to 1 1/2"
Opening: +35mm +35mmOpening without dies: 103mm 103mmSpeed (mm/sec) Close / Crimp / Open: 5.9 / 5.9 / 10.3 2.7 / 2.7 / 4.7Oil: 35 l 35 lDimensions (LxWxH): 720 x 600 x 672mm 592 x 545 x 672mmDies Supplied: 17, 20, 24, 28, 32, 36,
47, 54 and 62mm17, 20, 24, 28, 32, 36,
47, 54 and 62mmWeight: 203 Kg 160 Kg
DESCRIPTION POWER PART NUMBERS4 swaging machine 3 Phase S4
S4 Ecoline swaging machine 1 Phase S4ECOLINE1PHS4 Ecoline swaging machine 3 Phase S4ECOLINES4 Ecoline swaging machine 12 Volt S4ECOLINE12VS4 Ecoline swaging machine 24 Volt S4ECOLINE24V
S4
S4 Ecoline
Supplied with Quick Die Change SystemThe Quick Die Change System and Die Holder whichallows you to easily swap a full set of Dies in seconds.
Hose SkivingHydraulic Hose Machines
72www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
USM10 Hose Skiving MachineExternal Skiving: 3/16" to 2"Internal Skiving: 5/8" to 2"Noise Level: 60 dBADrive: 0.37 kWLength / Width / Height: 260 x 440 x 500Bench Mountable: YesWeight: 35 KgSupplied with External Skiving Mandrels. Internal Skiving Mandrels available upon request.
DESCRIPTION POWER PART NUMBERHose skiving machine 1 Phase USM10ECOLINEHose skiving machine 3 Phase USM10
Castors Swivel Castors
73www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Swivel Castor with Pneumatic Tyre• Pneumatic tyred wheel with pressed and zincated steel plate
Kg PART NUMBER
260 85 298 160x200 120x160 180 WH50PN260
Swivel Castor with Cast Iron Wheel• Cast iron wheel with polyurethane coating
Kg PART NUMBER
100 30 132 85 x 105 60 x 80 200 WH700100200 50 243 110 x 140 80 x 105 830 WH700200250 50 308 160 x 200 120 x 160 1200 WH700250
Swivel Castor with Nylon Wheel - Light Duty• White nylon wheel
Kg PART NUMBER
100 35 122 80 x 100 60 x 80 90 WH550100125 40 150 80 x 100 60 x 80 110 WH550125175 50 206 110 x 140 80 x 105 180 WH550175200 50 230 110 x 140 80 x 105 220 WH550200
Swivel Castor with Rubber Tyre• Black rubber tyre with steel fl anges
Kg PART NUMBER
80 30 104 80 x 100 60 x 80 75 WH508180100 30 123 80 x 100 60 x 80 90 WH5081100125 37.5 153 85 x 115 60 x 80 130 WH5081125140 37.5 174 85 x 115 60 x 80 140 WH5081140160 40 190 110 x 140 80 x 105 180 WH5081160180 50 208 110 x 140 80 x 105 220 WH5081180200 50 230 110 x 140 80 x 105 250 WH5081200250 60 293 160 x 200 120 x 160 350 WH5081250
Swivel Castor with Nylon Wheel - Medium Duty• High quality nylon 6 wheel
Kg PART NUMBER
100 35 123 80 x 100 60 x 80 110 WH50NK100125 40 153 85 x 115 60 x 80 150 WH50NK125150 40 179 85 x 115 60 x 80 200 WH50NK150250 60 293 160 x 200 120 x 160 400 WH50NK250
Castors Swivel Castors / Swivel Castors with Brakes
74www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Swivel Castor with Cast Iron Wheel & Brake• Cast iron wheel with polyurethane coating
Kg PART NUMBER
100 30 132 85 x 105 60 x 80 200 WH700P100150 40 185 110 x 140 80 x 105 400 WH700P150175 40 214 110 x 140 80 x 105 600 WH700P175250 50 308 160 x 200 120 x 160 1200 WH700P250
Swivel Castor with Nylon Wheel & Brake• High quality nylon 6 wheel
Kg PART NUMBER
200 50 230 110 x 140 80 x 105 300 WH50NF200250 60 293 160 x 200 120 x 160 400 WH50NF250
Swivel Castor with Rubber Tyre & Brake• Black rubber tyre with steel fl anges
Kg PART NUMBER
80 30 104 80 x 100 60 x 80 75 WH60080100 30 123 80 x 100 60 x 80 90 WH600100125 37.5 153 85 x 115 60 x 80 130 WH600125160 40 190 110 x 140 80 x 105 180 WH600160200 50 230 110 x 140 80 x 105 250 WH600200250 60 293 160 x 200 120 x 160 350 WH600250
Castors Fixed Castors
75www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Fixed Castor with Cast Iron Wheel• Cast iron wheel with polyurethane coating
Kg PART NUMBER
100 30 132 85 x 100 60 x 80 200 WH710100200 50 243 110 x 145 80 x 105 830 WH710200250 50 308 160 x 195 120 x 160 1200 WH710250
Fixed Castor with Nylon Wheel - Medium Duty• High quality nylon 6 wheel
Kg PART NUMBER
150 40 179 95 x 110 60 x 80 200 WH51NK150175 50 206 110 x 145 80 x 105 250 WH51NK175200 50 230 110 x 145 80 x 105 300 WH51NK200250 60 293 160 x 195 120 x 160 400 WH51NK250
Fixed Castor with Rubber Tyre• Black rubber tyre with steel fl anges
Kg PART NUMBER
80 30 104 85 x 100 60 x 80 75 WH518180100 30 123 85 x 100 60 x 80 90 WH5181100125 37.5 153 95 x 110 60 x 80 130 WH5181125140 37.5 174 95 x 110 60 x 80 140 WH5181140160 40 190 110 x 145 80 x 105 180 WH5181160250 60 293 160 x 195 120 x 160 350 WH5181250
Fixed Castor with Nylon Wheel - Light Duty• White nylon wheel
Kg PART NUMBER
100 35 122 85 x 100 60x80 90 WH551100125 40 150 85 x 100 60x80 110 WH551125150 40 178 85 x 100 60x80 120 WH551150175 50 206 110 x 145 80x105 180 WH551175200 50 230 110 x 145 80x105 220 WH551200
Fixed Castor with Rubber Wheel• Black Rubber Tyre with Thermoplastic Core
Kg PART NUMBER
125 37.5 150 85 x 100 60 x 80 100 WH451B125
Castors Fixed Castors / Castor Wheels
76www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Nylon Castor Wheel c/w Ball Bearing• Quality nylon 6 wheel, hub with ball bearing
Kg PART NUMBER
80 30 30 15 35x11 150 WH840N80200 50 55 20 47x14 550 WH840N200
Castor Wheel wtih Rubber Tyre• Black rubber tyre, steel fl anges, hub on nylon bush & roller bearing
Kg PART NUMBER
80 30 39 12 75 WH8180140 37.5 49 20 150 WH81140160 40 58 20 180 WH81160200 50 58 20 250 WH81200250 60 84 25 350 WH81250
Cast Iron Castor Wheel• Cast iron wheel with polyurethane coating , hub on ball bearing
Kg PART NUMBER
200 50 52 25 52x15 900 WH840200250 50 65 25 52x15 1200 WH840250
Nylon Castor Wheel without Bearing• White nylon wheel, hub with smooth hole
Kg PART NUMBER
80 30 40 12 130 WH8680125 40 49 15 250 WH86125150 40 49 15 270 WH86150175 50 59 20 300 WH86175
Castor Wheel with Pneumatic Tyre• Pneumatic tyre wheel with pressed and zincated steel plate. Hub on roller bearing
Kg PART NUMBER
260 85 20 180 WH81PN26020260 85 25 180 WH81PN26025
Castor Wheel with Pneumatic Tyre• Pneumatic tyre wheel with plastic hub
Kg PART NUMBER
300 - 20 - 10154
Cargo Care Castor Wheels
77www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Pallet Truck Wheel• High-resistance nylon 6 roller with injected polyurethane coating
Kg PART NUMBER
82 100 20 47x14 700 WH200NP82100
Pallet Truck Wheel• Steel roller with polyurethane coating
Kg PART NUMBER
82 60 20 47x14 550 WH200P826082 70 20 47x14 650 WH200P827082 100 20 47x14 950 WH200P82100
Personal Protection Visors / Helmets
78www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Nylon Face Shield with Mesh Visor and Ear DefendersDESCRIPTION PART NUMBER
Nylon face shield with mesh visor and ear defenders FGP477500
Nylon Face Shield with PVC Visor and Ear DefendersDESCRIPTION PART NUMBER
Nylon face shield with PVC visor and ear defenders FGP477501
Nylon Face Shield with Mesh VisorDESCRIPTION PART NUMBER
Nylon face shield with mesh visor FGP453320
Forestry Helmetwith Mesh Visor and Ear Defenders• Helmet EN 397 with adjustable head ring• Ear protection EN 352• Face protection EN 89/686/CEE
DESCRIPTION PART NUMBERForestry helmet with mesh visor and ear defenders FH010
Supplied in display box
Personal Protection Ear Muffs
79www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Ear Muffs with HeadbandProvides excellent protection that fi lters high frequency noise originating from dynamic machines such as Workshop Equipment, Motor Saws etc. This hearing protection complies with the requirements of the European Directive 89/686/CEE annexx II by means of the European Standard EN352-1:1993.• Adjustable headband.• Weight: 166g.
DESCRIPTION PART NUMBEREar muffs with adjustable headband FGP008254
Ear Muffs with Headband• Easy and adjustable headband sides to fi t all size.• Suitable for light industrial duty and outdoor construction• Lightweight pocket size for storage and carry easily.
Compliance:CE EN352-1 SNR: 23.4dBANSI S12.42 S3.19 NRR: 22.9dB
DESCRIPTION PART NUMBEREar muffs with adjustable and collapsible headband FGP455310
Peltor Optime IILower tones and higher volume. Increased muffl ing, primarily for lower frequencies (which also covers high frequencies) This fi rst-rate muffl ing gives suitable protection in most noise-hazard situations
DESCRIPTION PART NUMBERPeltor Optime II ear defender WP001007
Ear Muffs with Headband• Large foam-fi lled cushions with deep ear cups.• Good for storage or carry in pocket.• Wraparound wire steel with a good and comfortable wear for long time period.• Suitable use in high volume or noise working.
Compliance:CE EN352-1 SNR: 29dBANSI S12.42 S3.19 NRR: 31dB
DESCRIPTION PART NUMBEREar muffs with adjustable and collapsible headband FGP455320
Personal Protection Gloves
80www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Multi Purpose Latex Coated Work GlovesSold in packs of 12• Knitted seemless polycotton inner with latex coating on the palm• Good resistance to tearing• Crinkle latex provides great grip• Knitted cuff ensures a secure fit around the wrist to keep out dirt and debris
DESCRIPTION SIZE PART NUMBERMulti purpose latex coated work gloves Large NG09Multi purpose latex coated work gloves X Large NG10
Nitrile Gloves - DisposableStrong, latex-free disposable glove - ideal for light chemical handling and food contact• Powder-free.• 100 ambidextrous gloves per box.• Approved to BS EN 455 and BS EN 374
DESCRIPTION SIZE PART NUMBERNitrile gloves - Box of 100 Large DNG02LNitrile gloves - Box of 100 X Large DNG02XL
Heavy Duty Nitrile Gloves - DisposableHeavy Duty Superior nitrile glove that offers unparalleled strength and grip• Diamond Grip pattern both outside and in for enhanced grip• Combines the strength of a household with the fi t and feel of a disposable• Hi Viz orange colour to allow dirt to be easily identifi ed• Approved to BS EN 420:2003.
DESCRIPTION SIZE PART NUMBERHeavy Duty Nitrile gloves - Box of 50 Large DNG01LHeavy Duty Nitrile gloves - Box of 50 X Large DNG01XL
Personal Protection Gloves / Goggles / Glasses
81www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Chainsaw Protection GlovesLeather gloves with knitted wrist.
DESCRIPTION SIZE PART NUMBERChainsaw protection gloves Medium HS1339GPChainsaw protection gloves Large HS1340GPChainsaw protection gloves X Large HS1341GP
Rigger GlovesLeather glove with a cotton lining, doubled stitched
DESCRIPTION SIZE PART NUMBERRigger gloves - leather with cotton lining X Large HS1125
Goggles• PVC body with ventilation holes• Adjustable elastic strap• Weight: 60g
DESCRIPTION PART NUMBERPVC Goggles with ventilation hole FGP453960
Anti-Scratch Safety GlassesEuropean Standard EN170.• Polycarbonate• Anti-scratch and Anti-UV• Resistance impact• Can be worn over glasses• Weight: 45g
DESCRIPTION PART NUMBERAnt-scratch safety glasses FGP457617
Safety GlassesEuropean Standard EN170 for clear, EN172 for tinted.• Polycarbonate• Anti-UV• Resistance impact• Weight: 23g
DESCRIPTION COLOUR PART NUMBERSafety glasses Clear FGP457611
Personal Protection Masks / Leg Protection / Harnesses
82www.mchc.ieC O M P O N E NO M P O N E N T SC O M P O N E N T S
Pro HarnessDESCRIPTION PART NUMBERHarness with 2 shoulder straps FGP454961
Universal HarnessDESCRIPTION PART NUMBERUniversal harness FGP008260
Shin Protectors• Provides protection from knees to the ankles• Shin protection made from polyethylene• Adjustable straps with quick release clips• Lined with pre-formed, comfortable material• Universal size
DESCRIPTION PART NUMBERShin protectors - pack of 2 FGP454964
B-Brand P2V Mask - Valved• Polypropylene (P.P) outer layer provides smooth lining and avoids loose fi bres• Embossed fringe seal avoids fl uffy open layers around the edges• Latex free synthetic rubber head strap• Contour design ensures the compatibility of glasses / goggles and reduces fogging• Soft close-cell nose foam and adjustable nosepiece ensures custom shape and increases the worker comfort• EN149:2001
DESCRIPTION PART NUMBERP2V Mask with valve BBP2V