workflow / memoseip.urban-industrial.in/live/hrdpmp/hrdpmaster/igep/...Workshop Report Page 2 of 28...
Transcript of workflow / memoseip.urban-industrial.in/live/hrdpmp/hrdpmaster/igep/...Workshop Report Page 2 of 28...
Workshop Report
Page 1 of 28
Workshop title: 1st Replication Workshop- Jamnagar, Gujarat
Location: Jamnagar Factory Owners Association, GIDC, Jamnagar
Date / time: 30.05.2018 / 15.00 – 20.00 h
Project: SEIP-EII India
Objective/background of workshop
As part of the replication of success stories from EII project in Gujarat, the 1st replication workshop
was held in Jamnagar. This was done in cooperation with UNIDO as part of the GEF-UNIDO-BEE
programme on improving energy efficiency in various industrial clusters. One of the clusters is the
Jamnagar brass cluster and the workshop was targeted at capacity building of local service
providers. Dr. Malini Balakrishnan and Mr. Mihir Sharma participated in the workshop and presented
the success stories from SEIP-EII project relevant to this cluster.
The purpose of participating in this workshop was:
To share success stories of EII project using examples of specific implementations and the
savings obtained
To make the Jamnagar brass cluster (who are familiar with energy efficiency) aware of
resource efficiency and cleaner production concepts and techniques
To encourage replication of SEIP-EII success stories in the Jamnagar brass cluster.
The participants actively participated in the workshop and few of them also shared their interest and
potential areas of improvement in their production units. The workshop was interactive in nature.
Proceedings and Outcomes
The workshop was organised by UNIDO and CII and the following presentations were made (agenda
in Annexure I):
1. Case studies and activity – UNIDO cluster leader
2. IE 3 Motors- Replacement Programme and Case study (EESL)
3. Energy Efficient Permanent Magnet Compressor (Deep Pneumatics Pvt. Ltd.)
4. Resource Efficiency and Cleaner production (SEIP- EII project- adelphi)
5. BLDC Ceiling Fan and Implementation model for Jamnagar (Gorilla fan)
6. Energy Efficiency Project Subsidy Schemes (District Industrial Centre)
7. Solar Rooftop- O&M and Various Models Available in Market (Waree Solar)
8. Solar Light Pipe (E View Global (P) Ltd.
9. Government Scheme on EE/RE For MSME (SIDBI)
Dr. Malini Balakrishnan and Mr. Mihir Sharma presented the RECP success stories from SEIP-EII
project. During the session of over 1h, the participating industries were familiarised with SEIP-EII
project, RECP concept, success stories that were relevant for Jamnagar brass melting and extrusion
industries in the cluster and tools and techniques for RECP implementation. The presentation is
attached in Annexure II. The industries were receptive to extending the concept of energy
efficiency to cover other resources (especially materials) and were open to replicating best
practices from other locations. At the conclusion of the presentation, the industries were shown a
list of possible RECP measures that they could implement (based on the potential areas of
improvement in their respective industry) and their willingness to implement them. The industry
representatives indicated the potential of improvement through pasting sticky notes on the chart
Workshop Report
Page 2 of 28
mentioning various area of improvement. Detailed discussion was held with Mr. Sangani from Senor
Metals Pvt. Ltd. who was very keen to improve material use in brass melting and casting operations.
The details are given in Annexure III. The list of participants is given in Annexure IV.
Workshop Report
Page 3 of 28
The company-wise interest in different measures is summarised in the table below:
S.No Company Name LED Lighting Proper collection
of brass chips
Proper storage
of materials
and reuse
Recycling of
foundry sand
Proper
measurement,
monitoring and
process control
1 Shree Extrusion Limited √
2 Kavyam Engineering Pvt. Ltd. √
3 Metal Alloys Corporation √
4 Haria Extrusion √ √
5 Subhash Industries Parts and Spares √ √ √
6 Parts and Spares Pvt. Ltd. √ √
7 Century Chemical and Salt Work √
8 Raj Laxmi Industries √ √ √ √
9 Nimisha Brass Industries √
10 Om Brass Industries √ √
Workshop Report
Page 4 of 28
S.No Company Name LED Lighting Proper collection
of brass chips
Proper storage
of materials
and reuse
Recycling of
foundry sand
Proper
measurement,
monitoring and
process control
11 Senor Metal Pvt. Ltd. √ √ √ √ √
12 Dev Electric Store √
13 Apple Brass Industries √ √
Workshop Report
Page 5 of 28
Number of companies showing interest in specific RECP options
0
2
4
6
8
10
12
LED Lighting Proper collection ofbrass chips
Proper storage ofmaterials and reuse
Recycling of foundrysand
Propermeasurement,monitoring andprocess control
No
. co
mp
anie
s in
tere
ste
d
RECP Option
Workshop Report
Page 6 of 28
Workshop Report
Page 7 of 28
Workshop Report
Page 8 of 28
Annexure I: Agenda
Workshop Report
Page 9 of 28
Annexure II: Presentation
Workshop Report
Page 10 of 28
Workshop Report
Page 11 of 28
Workshop Report
Page 12 of 28
Workshop Report
Page 13 of 28
Workshop Report
Page 14 of 28
Workshop Report
Page 15 of 28
Workshop Report
Page 16 of 28
Workshop Report
Page 17 of 28
Workshop Report
Page 18 of 28
Workshop Report
Page 19 of 28
Workshop Report
Page 20 of 28
Workshop Report
Page 21 of 28
Workshop Report
Page 22 of 28
Workshop Report
Page 23 of 28
Workshop Report
Page 24 of 28
Annexure III: Detailed Feedback from Mr. Sangani, Senor Metals Pvt. Ltd.
Workshop Report
Page 25 of 28
Workshop Report
Page 26 of 28
Mr. C.G Sangani, Manager, Senor Metal Pvt. Ltd.
Workshop Report
Page 27 of 28
Annexure IV: List of participants
Workshop Report
Page 28 of 28