Work Skills Improvement Programmes - ELITC · install electric cabling and wiring systems. ......
2
ELITC News February 2016 – Issue No. 16/01 February 2016 MCI (P) 158/06/2015 Issue No. 16/01 ELITC News is published by Electronics Industries Training Centre, Block 5000, Ang Mo Kio Ave 5, #02-08 TECHplace II, Singapore 569870 65-6483 2535 • 65-6483 1700 • [email protected] • www.elitc.com UEN No. : S87SS0027A • CPE Registered • Period of Registration: 2/9/2015 – 1/9/2019 © February 2016 • Edited by Lim Lee Chin Printed by EAZI Printing Pte Ltd Management and Staff of ELITC Wish All Our Valued Customers A Happy Lunar New Year Talk to us on Customised Programmes this 2016 ELITC provides a service of program customisation for manufacturing and related industries supported by our committed and experienced in-house and associate trainers. - Existing Work Skills Improvement programmes can be tailored and designed to meet specific needs - Relevant suite of modules in Electrical and Electronics topics available to cater industry requirements - Customisation can be based on varied subjects such as electrical maintenance, quality control and productivity awareness, basic clean-room practices and warehouse operations, etc. Work Skills Improvement Programmes New Generic Work Skills Improvement Programmes for Wafer Fabrication Industry Basic Copper Metallisation Basic Chemical Vapor Deposition Basic Etching (Dry Etching) Basic Photolithography Basic Wet Cleaning Physical Vapor Deposition Course details can be found within our website at www.elitc.com. Contact [email protected] to find out more. Participants will learn about the basic engineering drawing concepts and definitions about datums, parts list. They will be able to know about geometric dimensioning and tolerancing and it helps in their own job duties and as well become expertise in their own industry. Suitable for those in as a technician or quality supervisor and those in manufacturing industry. Participants will learn how to install electric cabling and wiring systems. They will know how to perform maintenance and troubleshooting after the course. Suitable for those in quality inspection and electrical and electronic engineering industry. In this programme, participants learn about how to overcome barriers to become more effective communicate with clients or colleagues. They will develop spirit of teamwork and co- operation among the colleagues. This will further drive up production and quality in their job prospects. Suitable for those as a leader or leadgirls or experienced operators. Engineering Drawing Interpretation Electrical Installation and Machine Maintenance Section Leader Course Programme Course Fee Member Non- member Engineering Drawing Interpretation $299.60 $321.00 * Fees include prevailing GST rate Programme Course Fee Member Non- member Electrical Installation and Machine Maintenance $321.00 $374.50 * Fees include prevailing GST rate Programme Course Fee Member Non- member Section Leader Course $192.60 $214.00 * Fees include prevailing GST rate SkillsFuture is a national movement to provide Singaporeans with the opportunities to develop their fullest potential throughout life, regardless of their starting points. Through this movement, the skills, passion and contributions of every individual will drive Singapore’s next phase of development towards an advanced economy and inclusive society. No matter where you are in life – schooling years, early career, mid-career or silver years – you will find a variety of resources to help you attain mastery of skills. Skills mastery is more than having the right paper qualifications and being good at what you do currently; it is a mindset of continually striving towards greater excellence through knowledge, application and experience. With the help of the SkillsFuture Council, education and training providers, employers, unions – you can own a better future with skills mastery and lifelong learning. The tagline - Your skills. Your asset. Your future. For more information on SkillsFuture initiatives, please go to http://www.skillsfuture.sg/ SKILLSFUTURE CREDIT SkillsFuture Credit aims to encourage individual ownership of skills development and lifelong learning. All Singaporeans aged 25 and above will receive an opening credit of S$500 from January 2016. Your credit will not expire and the government will provide periodic top-ups, so you may accumulate your credit. For more information on SkillsFuture Credit, please click http://www.skillsfuture.sg/credit. What are the Courses? Explore the full list of approved courses at the SkillsFuture Credit Course Directory below: https://portal.wda.gov.sg/content/wda/course-search-directory.html. At <Training Provider> section, type: Electronics Industries Training Centre How to use the credit? From January 2016, all eligible Singaporeans are able to access their SkillsFuture Credit account with SingPass via www.skillsfuture.sg/credit. SkillsFuture Credit can be used on top of existing government course subsidies to pay for or offset the fees of the approved skills- related courses. All sources are retrieved from SkillsFuture website. What is SkillsFuture?
Transcript of Work Skills Improvement Programmes - ELITC · install electric cabling and wiring systems. ......
E L I T C N e w s F e b r u a r y 2 0 1 6 – I s s u e N o . 1 6 / 0 1
February 2016 MCI (P) 158/06/2015 Issue No. 16/01
ELITC News is published by Electronics Industries Training Centre,Block 5000, Ang Mo Kio Ave 5, #02-08 TECHplace II, Singapore 569870
65-6483 2535 • 65-6483 1700 • [email protected] • www.elitc.comUEN No. : S87SS0027A • CPE Registered • Period of Registration: 2/9/2015 – 1/9/2019
© February 2016 • Edited by Lim Lee ChinPrinted by EAZI Printing Pte Ltd
Management and Staff of ELITC Wish All Our Valued Customers A Happy Lunar New Year
Talk to us on Customised Programmes this 2016ELITC provides a service of program customisation for manufacturing and related industries supported by our committed and experienced in-house and associate trainers.
- Existing Work Skills Improvement programmes can be tailored and designed to meet specific needs
- Relevant suite of modules in Electrical and Electronics topics available to cater industry requirements
- Customisation can be based on varied subjects such as electrical maintenance, quality control and productivity awareness, basic clean-room practices and warehouse operations, etc.
Work Skills Improvement Programmes
New Generic Work Skills Improvement Programmes for Wafer Fabrication Industry
Basic Copper Metallisation Basic Chemical Vapor Deposition
Basic Etching (Dry Etching) Basic Photolithography
Basic Wet Cleaning Physical Vapor Deposition
Course details can be found within our website at www.elitc.com. Contact [email protected] to find out more.
Participants will learn about the basic engineering drawing concepts and definitions about datums, parts list. They will be able to know about geometric
dimensioning and tolerancing and it helps in their own job duties and as well become expertise in their own industry. Suitable for those in as a technician or quality supervisor and those in
manufacturing industry.
Participants will learn how to install electric cabling and wiring
systems. They will know how to perform
maintenance and troubleshooting after the course. Suitable for those in quality inspection
and electrical and electronic engineering industry.
In this programme, participants learn about how to overcome
barriers to become more effective communicate with clients or
colleagues. They will develop spirit of teamwork and co-
operation among the colleagues. This will further drive up
production and quality in their job prospects. Suitable for those as a leader or leadgirls or experienced
operators.
Engineering Drawing Interpretation
Electrical Installation and Machine Maintenance
Section Leader Course
Programme
Course Fee
MemberNon-
member
Engineering Drawing
Interpretation$299.60 $321.00
* Fees include prevailing GST rate
Programme
Course Fee
MemberNon-
member
Electrical Installation
and Machine Maintenance
$321.00 $374.50
* Fees include prevailing GST rate
Programme
Course Fee
MemberNon-
member
Section LeaderCourse
$192.60 $214.00
* Fees include prevailing GST rate
SkillsFuture is a national movement to provide Singaporeans with the opportunities to develop their fullest potential throughout life, regardless of their starting points. Through this movement, the skills, passion and contributions of every individual will drive Singapore’s next phase of development towards an advanced economy and inclusive society.
No matter where you are in life – schooling years, early career, mid-career or silver years – you will find a variety of resources to help you attain mastery of skills. Skills mastery is more than having the right paper qualifications and being good at what you do currently; it is a mindset of continually striving towards greater excellence through knowledge, application and experience. With the help of the SkillsFuture Council, education and training providers, employers, unions – you can own a better future with skills mastery and lifelong learning.
The tagline - Your skills. Your asset. Your future.
For more information on SkillsFuture initiatives, please go to http://www.skillsfuture.sg/
SKILLSFUTURE CREDITSkillsFuture Credit aims to encourage individual ownership of skills development and lifelong learning. All Singaporeans aged 25 and above will receive an opening credit of S$500 from January 2016. Your credit will not expire and the government will provide periodic top-ups, so you may accumulate your credit.
For more information on SkillsFuture Credit, please click http://www.skillsfuture.sg/credit.
What are the Courses?Explore the full list of approved courses at the SkillsFuture Credit Course Directory below:https://portal.wda.gov.sg/content/wda/course-search-directory.html.
At <Training Provider> section, type: Electronics Industries Training Centre
How to use the credit?From January 2016, all eligible Singaporeans are able to access their SkillsFuture Credit account with SingPass via www.skillsfuture.sg/credit.
SkillsFuture Credit can be used on top of existing government course subsidies to pay for or offset the fees of the approved skills-related courses.
All sources are retrieved from SkillsFuture website.
What is SkillsFuture?
E L I T C N e w s F e b r u a r y 2 0 1 6 – I s s u e N o . 1 6 / 0 1E L I T C N e w s F e b r u a r y 2 0 1 6 – I s s u e N o . 1 6 / 0 1
Testimonials on WSQ Programmes
“Thanks to ELITC for giving me an opportunity to upgrade my soft skills on this course Supervise
Quality Procedures”Mr Durai, on WSQ
programme, “Supervise
Quality Procedures”
“I can apply these skills at my workplace so as
to reduce or avoid product defects due to contamination”
Muhammad Hanafi Bin
Abdul Salm,
NTS Component
Singapore Pte Ltd
on WSQ programme,
“Follow Good Cleanroom
Practices”“Yes! I have a
better experience to find a job at my level - especially F&B sector.”
Jamil Bin Md Amin, Storeman
Coca Cola Far East Limited (Singapore)
on WSQ programme,
“Perform Warehouse
Operations”
“Learn how to work better with teammate”
Zinuddini Muhammad Adam,
Bus Driver SBS Transit on WSQ programme,
“Apply Teamwork in the Workplace”
• Over 130 companies embarked on the OMNI journey and trained over 380 Productivity Champions
• Currently in the 35th batch with sectors participated, from precision engineering, general manufacturing, oil & gas, marine, retail, F&B, etc.
• Suitable for management officers, management directors, supply chain or logistics managers, manufacturing and engineering managers or senior staff.
This programme offers a proven Operations Management Innovation methodology (OMNI) based on R&D, proven through highly successful applications on improving the effectiveness and efficiency of the companies’ operations. There are 3 course units focusing on the alignment of operations improvement to company’s strategic intent as they assess the performance of operations improvement based on productivity measurements. The course units also identify the activity landscape and generate operations improvement initiatives. Participants from organizations walk away with a developed implementation action plan with initiatives prioritised and calculated; each individual will be ready to play the role of innovators in the company, to continuously improve operations using the OmniMethodology™.
Contact us at [email protected] to find out more about the programme and WSQ funding available.
Embark on a more Productive and Innovative Workplace
WSQ Operations MaNagement Innovation (OMNI) Programme with SIMTech
SkillsFuture Programmes You Can Tap On
Call us at 6483 2535 or email us at [email protected] to find out more
Nitec in Technology1) Electronics (Computer & Networking)2) Electrical Technology (Power & Control)
BTEC Level 4 HNC Diploma in Electrical and Electronic Engineering (QCF)
BTEC Level 5 HND Diploma in Electrical and Electronic Engineering (QCF)
ManufacturingImplement Good Documentation Practices
Apply “8 Disciplines” Problem Solving ApproachApply Basic DMAIC Problem Solving Techniques
Manage Failure Mode and Effect Analysis
HR Management, Employment & RecruitmentApply Management Level Planning Skills
Apply Project Management SkillsManage Process Improvement
Manage Quality System and Processes
EngineeringFollow Good Cleanroom Practices
Perform PLC ProgrammingApply Control Circuits Diagnostic Skills
Apply Electronic Circuits Diagnostic Skills
Productivity & InnovationApply Teamwork in the Workplace
Apply 5S TechniquesApply Quality Systems
Apply Continuous Process Improvement TechniquesPerform Basic Productivity Practices
Apply Innovation in the Workplace
Repair & MaintenanceApply Autonomous Maintenance Techniques
Perform Adjustment and Measurement on Automation DevicesUse Basic Hand Tools and Equipment
Operate Electrical Measurement Devices
WSQ Programmes
