ELITC - LegoELITC News November 2017 – Issue No. 17/03 ELITC News is published by Electronics...
2
ELITC News November 2017 – Issue No. 17/03 ELITC News is published by Electronics Industries Training Centre, Block 5000, Ang Mo Kio Ave 5, #02-08 TECHplace II, Singapore 569870 65-6483 2535 • 65-6483 1700 • [email protected] • www.elitc.com UEN No. : S87SS0027A • CPE Registered • Period of Registration: 2/9/2015 – 1/9/2019 © November 2017 • Edited by Lim Lee Chin Printed by EAZI Printing Pte Ltd November 2017 MCI (P) 25/6/17 Issue No. 17/03 ELITC NEWS Nitec in Technology Calling out to individuals or company HR on upgrading your staff with our Nitec programmes at ELITC. Registration opens till 15 December 2017 for January 2018 intake Nitec in Technology - Electronics (Computer & Networking) Nitec 技术 - 电子 (电脑与网络) (Total hours to complete: 600 hours) Nitec in Technology - Electrical Technology (Power & Control) Nitec 技术 - 电气技术 (电力与控制) (Total hours to complete: 720 hours) Contact 6483 2535 or [email protected] to register now! Min “O” level equivalent qualification, if do not meet the requirements, to go to Ang Mo Kio ITE to take an Entrance Test. All course schedules and details are subject to changes at ELITC’s sole discretion. Are you seeking new and innovative ways to help your L&D activities? If yes, then this session is for you! The LEGO® Serious Play® (LSP) method is becoming the preferred approach to engage the learners 100% all the way during their learning journey. This hands-on session led by 2 Certified LSP Facilitators will enable the L&D professionals to experience the LSP method. Contact 6483 2535 or [email protected] for details. Date: 1 – 2 March 2018 Hand-Soldering and Rework including High Melting Point (HMP) Soldering - by Master IPC Trainer Member Fee: $663.40* Non-member Fee: $727.60* *Fees include prevailing GST rate ----------------------------------------------------- Dates are subjected to changes according to demand. To confirm given quotation and registration latest one month before start date. Contact 6483 2535 or [email protected] for details. Date: 8 Feb 2018 (Thu) Time: 2.00pm Complimentary Seats to be confirmed upon registration Lego Serious Play To our BTEC graduates, we are Proud of Your Achievement! 2017 Pearson BTEC Level 4 Higher National Certificate (HNC) Diploma in Electrical and Electronic Engineering (QCF) Graduates IPC Certification Programmes IPC Training & Certification Courses conducted by Steve Fribbins / Wayne Leong of Blackfox Training Institute. *Dates are subjected to changes according to demand. To confirm seats latest one month before start date. Recertification programmes available. Lau Han Lin (Merit Award) Jiang Jin Cheng Lee Way Kit (Merit Award) Ng Suh Ling Ho Jian Liang (Distinction Award) Mar Teck Chuen Aharvin A/L Ramayah Kong Chee Hou A8DPSA – Apply “8 Disciplines” Problem Solving Approach (2 days) ABDPST– Apply Basic DMAIC Problem Solving Techniques (2 days) MFMEA – Manage Failure Mode and Effect Analysis (2 days) MSPDATE – Manage Statistical Processes and Data Analysis in a Technical Environment (2 days) MPMDTE – Manage Problems and Make Decisions in a Technical Environment (3 days) Modules under Assembly & Test (A&T) Framework IPC J-STD-001 (CIT/ CIS)* Requirements for Soldered Electrical and Electronic Assemblies *Within week of 5 – 9 Mar 2018 IPC 7711/7721 (CIT/ CIS)* Rework of Electronic Assemblies/ Repair and Modification of Printed Boards and Electronic Assemblies *Within week of 14 – 18 May 2018 IPC-A-610 (CIT/ CIS)* Acceptability of Electronic Assemblies *Within week of 2 – 6 July 2018 IPC/WHMA-A-620 (CIT/ CIS)* Requirements and Acceptance for Cable and Wire Harness Assemblies *Within week of 1 - 5 Oct 2018 IPC-A-600 (CIT/ CIS)* Acceptability of Printed Boards To be confirmed *CIT = Certified IPC Trainer; CIS = Certified IPC Specialist Graduation night at Ramada Hotel, 6 th Nov 2017 BTEC qualifications include entry level to Higher National Diplomas and are recognised in more than 80 countries worldwide. The qualification offers a strong, sector-related emphasis on practical skills development alongside the development of requisite knowledge and understanding. Registration is Now Open for July 2018 Intake BTEC Bridging Programme for Pearson BTEC Level 5 Higher National Diploma in Electrical and Electronic Engineering (RQF) will commence in January 2018. Contact ELITC at 6483 2535 or email us at [email protected] Other available WSQ Modules FGMP – Follow Good Manufacturing Practices (1 day) ABPAS – Apply Biomedical Products’Assembly Skills (4 days) FGCP – Follow Good Cleanroom Practices (1 day)
Transcript of ELITC - LegoELITC News November 2017 – Issue No. 17/03 ELITC News is published by Electronics...
E L I T C N e w s N o v e m b e r 2 0 1 7 – I s s u e N o . 1 7 / 0 3
ELITC News is published by Electronics Industries Training Centre,Block 5000, Ang Mo Kio Ave 5, #02-08 TECHplace II, Singapore 569870
65-6483 2535 • 65-6483 1700 • [email protected] • www.elitc.comUEN No. : S87SS0027A • CPE Registered • Period of Registration: 2/9/2015 – 1/9/2019
© November 2017 • Edited by Lim Lee ChinPrinted by EAZI Printing Pte Ltd
November 2017 MCI (P) 25/6/17 Issue No. 17/03
ELITC NEWS
Nitec in TechnologyCalling out to individuals or company HR on upgrading your staff with our Nitec programmes at ELITC.
Registration opens till 15 December 2017 for January 2018 intake
Nitec in Technology - Electronics (Computer & Networking)Nitec 技术 - 电子 (电脑与网络)(Total hours to complete: 600 hours)
Nitec in Technology - Electrical Technology (Power & Control)Nitec 技术 - 电气技术 (电力与控制)
(Total hours to complete: 720 hours)
Contact 6483 2535 or [email protected] to register now! Min “O” level equivalent qualification, if do not meet the requirements, to go to Ang Mo Kio ITE to take an Entrance Test.
All course schedules and details are subject to changes at ELITC’s sole discretion.
Are you seeking new and innovative ways to help your L&D activities? If yes, then this session is for you!
The LEGO® Serious Play® (LSP) method is becoming the preferred approach to engage the learners 100% all the way during their learning journey.
This hands-on session led by 2 Certified LSP Facilitators will enable the L&D professionals to experience the LSP method.
Contact 6483 2535 or [email protected] for details.
Date: 1 – 2 March 2018
Hand-Soldering and Reworkincluding High Melting Point (HMP) Soldering - by Master IPC Trainer
Member Fee: $663.40*Non-member Fee: $727.60**Fees include prevailing GST rate-----------------------------------------------------
Dates are subjected to changes according to demand. To confirm given quotation and registration latest one month before start date.
Contact 6483 2535 or [email protected] for details.
Date: 8 Feb 2018 (Thu)Time: 2.00pm
ComplimentarySeats to be confirmed
upon registration
Lego Serious
Play
To our BTEC graduates, we are Proud of Your Achievement!
2017 Pearson BTEC Level 4 Higher National Certificate (HNC) Diploma in Electrical and Electronic Engineering
(QCF) Graduates
IPC Certification ProgrammesIPC Training & Certification Courses conducted by
Steve Fribbins / Wayne Leong of Blackfox Training Institute.
*Dates are subjected to changes according to demand.To confirm seats latest one month before start date.
Recertification programmes available.
Lau Han Lin(Merit Award)
Jiang Jin Cheng
Lee Way Kit(Merit Award)
Ng Suh Ling
Ho Jian Liang(Distinction Award)
Mar Teck Chuen
Aharvin A/L Ramayah
Kong Chee Hou
A8DPSA – Apply “8 Disciplines” Problem Solving Approach (2 days)ABDPST– Apply Basic DMAIC Problem Solving Techniques (2 days)MFMEA – Manage Failure Mode and Effect Analysis (2 days)MSPDATE – Manage Statistical Processes and Data Analysis in a Technical Environment (2 days)MPMDTE – Manage Problems and Make Decisions in a Technical Environment (3 days)
Modules under Assembly & Test (A&T) Framework
IPC J-STD-001 (CIT/ CIS)*Requirements for Soldered Electrical and Electronic Assemblies
*Within week of5 – 9 Mar 2018
IPC 7711/7721 (CIT/ CIS)*Rework of Electronic Assemblies/ Repair and Modification of Printed Boards and Electronic Assemblies
*Within week of14 – 18 May
2018
IPC-A-610 (CIT/ CIS)*Acceptability of Electronic Assemblies
*Within week of2 – 6 July 2018
IPC/WHMA-A-620 (CIT/ CIS)*Requirements and Acceptance for Cable and Wire Harness Assemblies
*Within week of1 - 5 Oct 2018
IPC-A-600 (CIT/ CIS)*Acceptability of Printed Boards
To be confirmed
*CIT = Certified IPC Trainer; CIS = Certified IPC Specialist
Graduation night at Ramada Hotel, 6th Nov 2017
BTEC qualifications include entry level to Higher National Diplomas and are recognised in more than 80 countries worldwide. The qualification offers a strong, sector-related emphasis on practical skills development alongside the development of requisite knowledge and understanding.
Registration is Now Open for July 2018 Intake
BTEC Bridging Programme for Pearson BTEC Level 5 Higher National Diploma in Electrical and Electronic Engineering (RQF) will commence in January 2018.
Contact ELITC at 6483 2535 or email us at [email protected]
Other available WSQ ModulesFGMP – Follow Good Manufacturing Practices (1 day)ABPAS – Apply Biomedical Products’Assembly Skills (4 days)FGCP – Follow Good Cleanroom Practices (1 day)
WSQ Certified Productivity and Innovation Specialist (CPIS)Completion of two core CGM modules
5S & QS+ 3 more modules on
CPIT - Apply Continuous Process Improvement Techniques (2 days)PBPP – Perform Basic Productivity Practices (2 days)
AIW – Apply Innovation in the Workplace (2 days)
Total days required to complete CPIS= 10 days (79 hours)
WSQ Certified Operations Specialist (COS)Completion of first 3 core CGM modules
TW, 5S & QS+ 1 more module on
WSH - Apply Workplace Safety and Health Policy (2 days)
Total days required to complete COS= 8 days (64 hours)
WSQ Certified Associate Operations Executive (AOE)
MQSP - Manage Quality System and Processes (5 days)APMS – Apply Project Management Skills (4 days)
MPI – Manage Process Improvement (3 days)AMLPS – Apply Management Level Planning Skills (2 days)
Total days required to complete AOE= 14 days (111 hours)
WSQ Certified Operations Professional (COP)Completion of first 3 core ACGM modules
STW, SWIP & SQP+ 1 more module on
SWSH - Supervise Workplace Safety and Health Practices (3 days)
Total days required to complete COP= 10 days (80 hours)
E L I T C N e w s N o v e m b e r 2 0 1 7 – I s s u e N o . 1 7 / 0 3 E L I T C N e w s N o v e m b e r 2 0 1 7 – I s s u e N o . 1 7 / 0 3
NOTE: All WSQ modules reflected can be taken individually and independently of each other. Skill-up with a WSQ programme at your own flexible pace or embark on a WSQ pathway/ qualification today.
Select the WSQ pathway you wish to complete
Integration Pathway(Core + 2 elective modules)
UBHT – Use Basic Hand Tools &
Equipment (2 days)
OEMD – Operate Electrical
Measurement Devices (2 days)
Automation Pathway(Core + 2 elective modules)
AMT – Apply Autonomous
Maintenance Techniques(3 days)
PAMAD – Perform Adjustment and Measurement on Automation Devices
(2 days)
Precision Pathway(Core + 2 elective modules)
UHT – Use Hand Tools
(2 days)
OBMD – Operate Basic
Measuring Devices (2 days)
Logistics Pathway(Core + 2 elective modules)
PSTCHO – Perform Stock Control
and Housekeeping Operations
(2 days)
PWO – Perform Warehouse
Operations(2 days)
---------------Total days required to
complete CGM (Integration)= 10 days (80 hours)
---------------Total days required to
complete CGM (Automation)= 11 days (88 hours)
---------------Total days required to
complete CGM (Precision)= 10 days (83 hours)
---------------Total days required to
complete CGM (Logistics)= 10 days (79 hours)
Select the WSQ pathway you wish to complete
Integration Pathway(Core + any 2 elective modules)
PBPIED – Perform BASIC Programming Interface on
Electronic Devices (4 days)
PCAPD – Perform Computer Aided PCB Designing
(4 days)
AECDS – Apply Electronic Circuits Diagnostic Skills
(3 days)
Automation Pathway(Core + 2 elective modules)
PLC – Perform PLC Programming
(5 days)
ACCDS – Apply Control Circuits Diagnostic Skills
(3 days)
---------------Total maximum days required to complete ACGM
(Integration)= 19 days (151 hours)
---------------Total days required to complete ACGM
(Automation)= 19 days (151 hours)
WSQ Advanced Certificate in Generic Manufacturing Skills (ACGM)5 Core Modules
STW - Supervise Teams at Work (3 days)SWIP - Supervise Work Improvement Processes (2 days)
SQP - Supervise Quality Procedures (2 days)IGDP - Implement Good Documentation Practices (1 day)
ABEM - Apply Basic Engineering Mathematics at Work (3 days)
WSQ Certificate in Generic Manufacturing Skills (CGM)3 Core Modules
TW - Apply Teamwork in the Workplace (2 days)5S - Apply 5S Techniques (2 days)
QS - Apply Quality Systems (2 days)
