WOODWORKING HM0870C - Makita Power Tools South Africa · Tools are not supplied with drill bits,...
Transcript of WOODWORKING HM0870C - Makita Power Tools South Africa · Tools are not supplied with drill bits,...
MakitaPowerToolsSAmakita.co.za
Tools are not supplied with drill bits, discs, etc. unless otherwise stated. • The above tools shown are suitable for industrial applications unless otherwise stated. • Models shown in this brochure are a representation only and not to scale. • Prices correct at time of going to print. • Rutherford is not responsible for printing errors (E & OE). • Prices applicable while current stocks last.
• Rutherford reserves the right to change prices without prior notice. • Recommended retail prices inclusive of VAT at 15% unless otherwise stated. • Terms & Conditions apply.
• Tools are not supplied with drill bits, discs, etc. unless otherwise stated.
• The above tools shown are suitable for industrial applications unless otherwise stated.
• Models shown in this brochure are a representation only and not to scale.
• Prices correct at time of going to print. • Rutherford is not responsible for printing errors (E & OE).
• Prices applicable while current stocks last. • Rutherford reserves the right to change prices without prior notice. • Recommended retail prices inclusive of VAT at 15% unless otherwise stated.
• Terms & Conditions apply.
Offer valid from the 12 of April to 31 of May 2019. While stocks last (Stock levels have been based
on previous demand)
Tools are not supplied with drill bits, discs, etc. unless otherwise stated. • The above tools shown are suitable for industrial applications unless otherwise stated. • Models shown in this brochure are a representation only and not to scale. • Prices correct at time of going to print. • Rutherford is not responsible for printing errors (E & OE). • Prices applicable while current stocks last.
• Rutherford reserves the right to change prices without prior notice. • Recommended retail prices inclusive of VAT at 14% unless otherwise stated. • Terms & Conditions apply.
Offer valid from the 12th of April to the 31st of May 2019, while stocks last.
Offer valid from the 12th of April to 31st of May 2019, while stocks last. Offer valid from the 12th of April to 31st of May 2019, while stocks last.
HR4002ROTARY HAMMER6.2 Joules - SDS max 2 Operation modes: Hammering with rotation & hammering only.High speed for high work efficiency.
• Capacities: Concrete: With TCT Bit: 40mm • Blows per Minute (b/min): 2,500• No Load Speed (r/min): 680
1,050W
With carry caseR8,599
HR2630ROTARY HAMMER2.4 Joules - SDS+ 3 Operation modes: Hammering, hammering with rotation, rotation only.Easy to grip handle. Ergonomically designed for maximum power thrust.
• Capacities: Concrete: 26mm, Steel: 13mm, Wood: 32mm
• Blows per Minute (b/min): 0 - 4,600• No Load Speed (r/min): 0 - 1,200
800W
With carry caseR3,299
HR2600ROTARY HAMMER2.4 Joules - SDS+ 2 Operation modes: Hammering with rotation & rotation only.Operation mode change lever position on the bottom of gear housing for reduced possibility of breakage
• Capacities: Concrete: 26mm, Steel: 13mm, Wood: 32mm
• Blows per Minute (b/min): 0 - 4,600• No Load Speed (r/min): 0 - 1,200
800W
With carry caseR3,139
For steel strutsSilent clutch
DRYWALL SCREWDRIVER
R2,299• Capacities: Drywall Screw: 4mm Driving Shank: 6,35mm hex• No Load Speed (r/min): 0 - 6,000
FS6300570W
Electronic control and speed dialToolless blade change system
JIG SAW
• Length of Stroke: 26mm• Max Cutting Capacities: Wood: 135mm, Steel: 10mm• Strokes per Minute (s/min): 800 - 2,800
4350FCT
DRYWALL SCREWDRIVERCombination (clutch type) 6-stage torque adjustment
• Capacities: Hex screw: 6mm Drywall screw: 6mm Self drilling screw: 6mm• No Load Speed (r/min): 0 - 2,500
FS2700
570W
R2,599
SPECIALS
TOOLSDAYS
SPECIALS
TOOLSDAYS
TOOLSDAYS
WOOD CUTTING SAW
DOUBLE SLIDE COMPOUND MITRE SAW WITH TCT WOOD CUTTING BLADE
N5900B
LS1019L
A hard working saw with the power to rip through most materials• Blade Dia: 235mm • Bore Size: 30mm• Max. Cutting Capacities: At 0° - 85mm, At 45°- 60mm, At 50° - 53mm• No Load Speed (r/min): 4,100
Single sliding system enables smooth operation to produce superior cuts• Blade Dia: 260mm • Max. Cutting Capacities (Bevel/Mitre): At 90°/ 90° - 68mm/310mm At 90°/ 90° - 91mm/279mm At 90°/ 45°LR - 68mm/218mm At 90°/ 45°LR - 91mm/197mm• No Load Speed (r/min): 3,200
Standard with blade part no. A-89866
2,000W
1,510W
R3,299
R17,799
THICKNESSER2012NB
• Compactandlightweight(28.1kg)• Uniquefeedingmechanism• 4-PostDesign
• Cutting Width in Pine: 304mm• Cutting Depth in Pine:
3mm of stock width less than 150mm 1.5mm of stock width from 150mm to 240mm• Feed Rate per Minute: 8.5m• Table Size (W x L): 304 x 771mm• No Load Speed (r/min): 8,500
1,650W
R15,499
R4,799
WOOD CUTTING SAWHS0600
Standard with blade part no. B-12859
2,000W
Enables single - pass cutting of 4x materials• Blade Dia: 260 - 270mm• Max. Cutting Capacities: At 0° - 97mm At 45°- 69mm• No Load Speed (r/min): 4,100
With carry caseR4,499
PLANERKP0810K
850WLightweight design for easy handling. Reversible mini TCT blades• Planing Width: 82mm• Max Planing Depth: 4mm• No Load Speed (r/min): 16,000• Rebate: 25mm
RANDOM ORBIT SANDER
BO6050J
R5,499
BELT SANDER9403
1,200WPowerful motor for high production use• Belt Size: 100mm x 610mm • Belt Speed: 500 m/min
Ergonomically designed palm grip2 Sanding modes: Finishing sanding and buffing, sanding and polishing
• Pad Diameter: 150mm • Abrasive disc Diameter:150mm• Orbits per Minute:
1,600 - 6,800• Sanding Strokes per Minute
(s/min): 3,200 - 13,600• Orbit Diameter: 5,5mm
With carry caseR4,399
BISCUIT JOINERNew compact and lightweight design
• Blade Dia: 100mm • No Load Speed (r/min):
11,000
Standard with blade part no. B-20644
701W
PJ7000
With carry caseR7,299
IMPACT DRILL (With Hammer Action)13mm gear chuck, 2 speedExtra Heavy Duty, Variable Speed R&L
• Drilling Capacities: Concrete: 20mm Steel:13mm, Wood: 40mm• Impacts per Minute (I/min): High: 0 - 46,000 - Low: 0 - 18,000• No Load Speed (r/min):
High: 0 - 2,300 - Low: 0 - 900
HP2010N
With carry caseR5,499
750W
IMPACT DRILL(With Hammer Action)13mm gear chuckHigh powered motor
ROTARY DRILL16mm gear chuckDrilling for a variety of materials
ROTARY DRILLAngle Drill 10mm gear chuckIdeal for close quarter drilling - 66mm head height
• Drilling Capacities: Concrete: 16mm Steel:13mm, Wood: 30mm• Impacts per Minute (I/min): 0 - 48,000• No Load Speed (r/min): 0 - 3,200
• Drilling Capacities: Steel:16mm, Wood: 45mm• No Load Speed (r/min): 650/700/1,250/1,500
• Drilling Capacities: Steel:10mm, Wood: 25mm• No Load Speed (r/min): 0 - 2,400
HP1630
6300-4
DA3010F
R1,599
R4,899 R3,799
710W
650W
650W
ROTARY HAMMER20 Joules - SDS max 2 Operation modes: Hammering with rotation & hammering only.• Max Bit Diameter: 52mm • Blows per Minute (b/min):
1,100 - 2,250• No Load Speed (r/min): 150 - 310
HR5212C
With carry caseR16,9991,510W
450W
SPECIALS
720W
R3,699With carry case
Electronic control and speed dialToolless blade change system
JIG SAW
• Length of Stroke: 26mm• Max Cutting Capacities: Wood: 135mm, Steel: 10mm• Strokes per Minute (s/min): 800 - 2,800
4351FCT
R3,699With carry case
720W
R1,999
ROUTER PLUNGE TYPE 6.35mmHighly durable and well designed
• Collet Capacity: 6,35mm• Plunge Capacity: 0 - 35mm• No Load Speed (r/min): 27,000
RP0900900W
R3,999
FINISHING SANDER9046 1/2 Sheet
Powerful performance for pro’s needs
• Pad Size: 115mm x 229mm
• Abrasive Paper Size: 115 x 280mm
• Orbits per Minute: 6,000
600W
750W
R6,899With systainer case
WO
OD
WO
RKIN
G
HM0870CDEMOLITION HAMMERLight Chipper 11.4 JoulesSDS MAX Shank
Powerful, compact and light-weight, 5.1kg body• Blows per Minute (p/min):
1,100 - 2,650
1,100W
COMPOUND MITRE SAW with TCT Wood Cutting Blade
LS1040
Bevel cuts up to 45° left• Blade Diameter: 255mm - 260mm• Bore Size: 25.4mm• Max. Cutting Capacity
with 255mm blade: At 0° - 90.5mm x 95mm At 45° - 90,5mm x 67mm• No Load Speed (r/min): 4,600
1,650W
R5,499
Tools are not supplied with drill bits, discs, etc. unless otherwise stated. • The above tools shown are suitable for industrial applications unless otherwise stated. • Models shown in this brochure are a representation only and not to scale. • Prices correct at time of going to print. • Rutherford is not responsible for printing errors (E & OE). • Prices applicable while current stocks last.
• Rutherford reserves the right to change prices without prior notice. • Recommended retail prices inclusive of VAT at 15% unless otherwise stated. • Terms & Conditions apply.
Tools are not supplied with drill bits, discs, etc. unless otherwise stated. • The above tools shown are suitable for industrial applications unless otherwise stated. • Models shown in this brochure are a representation only and not to scale. • Prices correct at time of going to print. • Rutherford is not responsible for printing errors (E & OE). • Prices applicable while current stocks last.
• Rutherford reserves the right to change prices without prior notice. • Recommended retail prices inclusive of VAT at 15% unless otherwise stated. • Terms & Conditions apply.
Tools are not supplied with drill bits, discs, etc. unless otherwise stated. • The above tools shown are suitable for industrial applications unless otherwise stated. • Models shown in this brochure are a representation only and not to scale. • Prices correct at time of going to print. • Rutherford is not responsible for printing errors (E & OE). • Prices applicable while current stocks last.
• Rutherford reserves the right to change prices without prior notice. • Recommended retail prices inclusive of VAT at 15% unless otherwise stated. • Terms & Conditions apply.
CONTINUOUS INNOVATIONCONTINUOUS INNOVATION
SPEC
IALI
ZED
TO
OLS
ENG
INEE
RIN
G
CORDLESS TRIMMERThe soft-start function minimises start-up shockand allows the tool to start smoothly
DRT50ZJ
• Collet Capacity: 6.35mm• No Load Speed (r/min): 10,000 - 30,000
R1,899
Multiple measurement functions for increased versatility of applications
Standard Equipment: Pouch, strap, 2 x AAA batteries. • Measuring Range: 50m• Typical Measuring Tolerance: ±2.0mm / 10m• Max Measuring Tolerance: ±3.0mm / 10m• Ø Laser Point: 6mm at 10m• Laser Class: 2 • Laser Type: 635 nm, <1 mW• Protection Class: IP54
LASER DISTANCE MEASURELD050P
BATTERIES AND CHARGERS NOT INCLUDED ON ALL THE ABOVE TOOLS UNLESS OTHERWISE STATED
Offer valid from the 12th of April to 31st of May 2019, while stocks last. Offer valid from the 12th of April to 31st of May 2019, while stocks last.SPECIALS SPECIALS
TOOLSDAYS
TOOLSDAYS
ANGLE GRINDERErgonomically best possible grip for easy handling
• Wheel Diameter:115mm• Hole Diameter: 22.23mm• No Load Speed (r/min): 11,000
GA4530720W
R1,159
COLD METAL CUT-OFF SAWwith TCT blade for mild steel“Cold”cutting for extra safety and virtually burn-free cuts.
• Blade Diameter: 305mm• Bore Size: 25.4mm• Max Cutting capacity: At 0°: 115mm, 75mm x 150mm At 45°: 90mm, 85mm x 85mm• No Load Speed (r/min): 1,300
LC12301,750W
R8,999
RECIPRO SAW, ORBITALExtra-low vibration and extra power• Max. Cutting Capacities: In Pipe: 130mm, In Wood: 255mm• Length of Stroke: 32mm • Strokes per Minute: 0 - 2,800
JR3070CT1,510W
R4,799With carry case
R6,599With carry case
NIBBLER 3.2mmJN3201J
Robust design with elastomer coated handle, providing easy operation
• Max Cutting Capacities: Mild Steel up to 400 N/mm2: 3.2mm
Stainless Steel up to 600 N/mm2: 2.5mm Aluminium up to 200 N/mm2: 3.5mm• Minimum Cutting Radius:
Outside Edge: 128mm, Inside Edge: 120mm• Strokes per Minute (s/min): 1,300
710W
R8,599With carry case
SHEAR 1.6mm
SHEAR 3.2mm
JS1602
JS3201JSlim motor housing and rear cover provides more control and better manoeuvrability
• Max Cutting Capacities: Mild Steel up to 400 N/mm2: 1.6mm
Stainless Steel up to 600 N/mm2: 1.2mm Aluminium up to 200 N/mm2: 2.5mm• Minimum Cutting Radius: 30mm• Strokes per Minute (s/min): 4,000
Robust design with elastomer coated handle, providing easy operation
• Max Cutting Capacities: Mild Steel up to 400 N/mm2: 3.2mm
Stainless Steel up to 600 N/mm2: 2.5mm Aluminium up to 200 N/mm2: 4.0mm• Minimum Cutting Radius: 50mm• Strokes per Minute (s/min): 1,600
380W
710W
R12,299With carry case
R9,499With carry case
IMPACT WRENCHTW1000
Robust high torque impact wrench for heavy-duty applications
• Capacities: Standard Bolt: M24 - M30
High Tenstile Bolt: M22 - M24 Square Drive: 25.4mm
• Impacts per Minute (I/min): 1,500• No Load Speed (r/min): 1,400
1,200W
1000Nm
588Nm
R5,399
IMPACT WRENCHPowerful torque for super duty applications
• Capacities: Standard Bolt: M16 - M22 High Tensile Bolt: M16 - M20 Square Drive: 19mm• Impacts per Minute: 1,600• No Load Speed (r/min): 1,700• Max Fastening Torque: 588Nm
6906
850W
R3,999With carry case
TW0200IMPACT WRENCH
Aluminium hammer case with high durability
• Capacities: Standard Bolt: M10 - M16
High Tenstile Bolt: M10 - M12 Square Drive: 12.7mm
• Impacts per Minute (I/min): 0 - 2,200
• Max. Fastening Torque: 200Nm
• No Load Speed (r/min): 0 - 2,200
380W
200Nm
R1,999
R1,599 R1,129
18V BATTERY
BL1830B 3.0Ah
FAST CHARGER
Fast charger-charges ALL 18V Li-Ion Makita Batteries.DC18RC
18V BATTERY
BL1850B 5.0Ah
BL1860B 6.0Ah
18V BATTERY
22 minute charge time with DC18RC. With built-in battery fuel gauge.
45 minute charge time with DC18RC. With built-in battery fuel gauge.
55 minute charge time with DC18RC. With built-in battery fuel gauge.
R1,099
Robust and handy design. Fast self levelling time
Standard Equipment: Pouch, Magnetic bracket, Target card, 3 x AA batteries.
• Line Beam Direction (Horizontal/Vertical): 2 line• Measuring Range: Up to 15m• Detector Range: Up to 60m• Level Accuracy: ± 3mm/10m• Self-levelling Range: 4 ± 1°• Horizontal/Vertical Fan Angle: 180°• Laser Type: (Laser Class 2): 635nm • Protection Class: IP54
SK104ZCROSS LINE LASER/SELF LEVELLING
R3,599
CORDLESS ANGLE GRINDERBrushless DC motor generates less heat build-up and is ideal for prolonged use in manufacturing/production applications
• Max. Capacities Diameter: Depressed Centre Wheel: 115mm
Abrasive Disc: 115mm Diamond Wheel: 115mm
• No Load Speed (r/min): 8,500
DGA456ZJ
R4,399With systainer case
CORDLESS IMPACT DRIVERHigher speed, more powerful and more compact
CORDLESS MULTI TOOLWide selection of accessories available for various applications
• Machine Screw: M4 - M8• Standard Bolt: M5 - M16• High Tenstile Bolt: M5 - M14• Coarse Thread (screw): 22 - 125mm• Hex Shank: 6.35mm• Max. Fastening Torque: 170Nm• Impacts per Minute (I/min): 0 - 3,600• No Load Speed (r/min): 0 - 3,400
• Oscillations per minute: 6,000 - 20,000
DTD153ZJ
R2,899With systainer case
Batteries and Charger Sold Separately
Batteries and Charger Sold Separately
Batteries and Charger Sold Separately
Batteries and Charger Sold Separately
Batteries and Charger Sold Separately
Batteries and Charger Sold Separately
Batteries and Charger Sold Separately Batteries and Charger Sold Separately
Batteries and Charger Sold Separately
CORDLESS NIBBLERThis cordless model increases your operating field. Anti-restart function
• Max Cutting Capacities: Mild steel up to 400 N/mm2: 1.6mm Stainless steel up to 600 N/mm2: 1.2mm Aluminium up to 200 N/mm2: 2.5mm
• Minimum Cutting Radius: Outside Edge: 50mm, Inside Edge: 45mm
• Strokes per Minute (s/min): 1,900
DJN161Z
R5,899
R2,899
CORDLESS IMPACT DRIVER DRILLExtremely compact tool size
• Capacities: Steel: 13mm, Wood: 36 mm, Masonry: 13mm• Impacts per minute (I/min):
High: 0 - 19,500, Low: 0 - 6,000• Maximum Torque: Hard: 42Nm, Soft: 27Nm• No Load Speed (r/min):
High: 0 - 1,300, Low: 0 - 400
DHP453ZK
R1,499With carry case
R3,799With systainer case
TWIN BATTERY CORDLESS ANGLE GRINDERTwo 18V LXT Li-ion batteries deliver the power and performance for corded demands without leaving the
• Max. Capacities (dia.): Depressed Centre Wheel: 230mm• No Load Speed (r/min): 6,000
DGA900ZK
R5,599With carry case
TWIN BATTERY CORDLESS ROTARY HAMMER3.0 Joules - SDS+ 3 Operation modes: Hammering, hammering with rotation, rotation only.• Capacities: Concrete: 26mm, Steel: 13mm, Wood: 32 mm• Impacts per Minute (I/min): 0 - 4,800• No Load Speed (r/min): 0 - 1,200
DHR263ZK
R5,599With carry case
Rotary hammer sold without bits
Battery fuel gauge
TWIN BATTERY CORDLESS PLUNGE CUT SAWTwin 18V Battery modelUpto40%fastercuttingthancurrentcordedmodel
DSP600ZJ
R9,299With systainer case
and 1.4m rail
18V
LI-
ION
CO
RDLE
SS T
OO
LS
18V
LI-
ION
CO
RDLE
SS T
OO
LS
• Blade Diameter: 165mm• Max Cutting Capacity: 90°: 56mm, 45°: 40mm, 48°: 38mm• Vibration Level: 2.5m/s2 or less• Sound Pressure level: 92dB(A)• Sound Power level: 103dB(A)• No Load Speed (r/min): 2,500 - 6,300
CORDLESS IMPACT DRIVER DRILL KIT
DHP482RFE
R4,999With carry case
Included in the carry case:• 1xDC18RCFastCharger
• 2xBL1830B3.0Ah18VLithium-IonBatteries
• 1xDHP482ImpactDriverDrill
• Capacity: Steel: 13mm, Wood: 38mm, Masonry: 13mm• Impacts per min (I/min): Hi: 0 - 28,500, Lo: 0 - 9,000• Max Torque: Hard: 62Nm, Soft: 36Nm• No Load Speed (r/min): Hi: 0 - 1,900, Lo: 0 - 600
DTM50Z
9237CBSANDER - POLISHERVariable speed control by dial, rotation speed is adjustable to application.
• Max. Capacities Diameter:
Abrasive disc: 180mm. Wool Pad: 180mm• No Load Speed (r/min):
0 - 3,200
1,200W
R4,999
16 GAUGE PNEUMATIC BRAD NAILERT-Type
HEAT GUNTemperature controlled by potentiometer
• Nail Length: 20mm - 64mm
• Gauge: 16Ga• Magazine Capacity:
100pcs• Operating Air Pressure: 72,5 -116 PSI
• Air Temperature: 100°C - 550°C
• Air Flow (l/min): 250 - 500
AF600
HG551VK
R3,849With carry case
R2,319With carry case
1,800W
BATTERIES AND CHARGERS NOT INCLUDED ON ALL THE ABOVE TOOLS UNLESS OTHERWISE STATED
ANGLE GRINDERDeveloped for Heavy Duty applications
• Wheel Diameter: 230mm
• No Load Speed (r/min): 6,600
GA9060 230mm
R2,999
2,200W
RECHARGEABLE FLASHLIGHTHigh luminance 3,2W single LED
• Current: 0.6A• Continuous Use (Hours): 6 (1.5Ah). 13 (3.0Ah)
DML802
R799Batteries and Charger Sold Separately
Batteries and Charger Sold Separately
RECHARGEABLE FLASHLIGHTNon-slip rubber head strap for hands-free operation
• Run Time (hrs): Up to 30• Illuminance: at 1m from light source 2,000lx• Luminous ux: 100lm
DML800
R659Batteries and Charger Sold Separately
CORDLESS DUST EXTRACTIONNot for small particles like concrete/masonry dust
• Run Time: High: 13 min, low: 26 min (3.0Ah)• Max Peak Air flow: 3.4m3/min• Max Sealed Suction: 5.5kpa• Recoverable capacity: Dust 3.0L
DVC350Z
R3,699Batteries and Charger Sold Separately
LED FLASHLIGHTVersatile work light providing ultra-bright illumination and convenience. Built-inUSBportforchargingportableelectronicdevices
• Run Time (hrs): Up to: 43• Main Light (on bar side): Luminous ux (Full brightness): 710lm
Illuminance (Full brightness): 340lx• Sub Light (on top side):
Luminous ux: 130lm, Illuminance: 1,900 lx
DML807
R1,459