Wms 450 Schematic Part List

download Wms 450 Schematic Part List

of 52

Transcript of Wms 450 Schematic Part List

  • 8/22/2019 Wms 450 Schematic Part List

    1/52

    WMS 450

    Multichannel System

    Schematic & Part List

    1-12 Channel

    Wolfgang Fritz / Feb. 2008MCS0802001

    1

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    2/52

    Introduction

    SRA2 B/W active directional antenna

    For Venues (tour sound &installs) that cover large distances (up to 150m, 500 ft) like

    music halls, stadiums and other open air applications.

    RA4000 B/W active omni-directional antenna

    For Venues without a designated transmitter area and up to 100m/330 ft free line of

    sight. Ideal for conference rooms, multi purpose halls, houses of worship etc.

    The following schematics will help you to easily set up multi channel systems.

    Please use the equipment that is specified in the schematics only.

    For your convenience and understanding, weve added technical information and part lists.

    You can use this part lists when ordering the system you require! If you need any help

    regarding the frequency regulations or if your particular situation doesnt allow for a standard

    system to be installed, please do not hesitate to contact us [email protected].

    All the WMS450 Systems in this document are designed with active antennas that can

    used in all venues with a 20m RG58 antenna cable.

    Wolfgang Fritz / Feb. 2008MCS0802001

    2

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    3/52

    Content

    Wolfgang Fritz / Feb. 2008MCS0802001

    General Information Page

    Receiver/Antenna Placement Information 4

    Squelch Information 4

    Intermodulation Information 4

    Cable Attenuation Information 5

    PS4000 dip switch Information 5

    AB4000 dip switch Information 5

    PS4000 dip Switch Matrix Information 6

    Required Component Matrix Information 7

    Glossar Information 8

    WMS System Antenna Type Page

    SRA2 B/W

    RA4000 B/W

    SRA2 B/W

    RA4000 B/W

    2 Channel no PS4000

    2 Channel no PS4000

    1 Channel

    Channel1

    2

    2 Channel RA4000 B/W

    SRA2 B/WChannel

    SRA2 B/W4

    4

    Channel no PSU4000

    Channel no PSU4000 RA4000 B/W

    4

    4

    5

    5

    Channel

    Channel

    Channel

    Channel

    SRA2 B/W

    RA4000 B/W

    SRA2 B/W

    RA4000 B/W

    SRA2 B/W

    6 Channel RA4000 B/W

    6 Channel

    8 Channel SRA2 B/W

    8 Channel RA4000 B/W

    Channel9

    9 Channel10 Channel

    10 Channel

    SRA2 B/W

    RA4000 B/WSRA2 B/W

    RA4000 B/W

    SRA2 B/W

    RA4000 B/W

    12

    12

    Channel

    Channel

    Schematic / Part List

    Schematic / Part List

    Schematic / Part List

    Schematic / Part List

    Schematic / Part List

    Schematic / Part List

    Schematic / Part List

    Schematic / Part List

    Schematic / Part List

    Schematic / Part List

    Schematic / Part List

    Schematic / Part List

    Schematic / Part List

    Schematic / Part List

    Schematic / Part List

    Schematic / Part List

    Schematic / Part List

    Schematic / Part ListSchematic / Part List

    Schematic / Part List

    Schematic / Part List

    Schematic / Part List

    9

    11

    13

    15

    17

    19

    21

    23

    25

    27

    29

    31

    33

    35

    37

    39

    41

    4345

    47

    49

    51

    3

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    4/52

    Technical Information

    Wireless Basics

    Every wireless microphone system has to operate on one specific frequencyTransmitter and receiver of a system need to work on the same frequencyTwo transmitters cannot be used with one receiver at the same time

    Receiver/Antenna Placement

    Direct line of sight between transmitter and receiver antennaPlace the receiver/antennas at least 5 ft. (1.5 m) away from all transmittersPlace the receiver antennas at least 5 ft. (1.5 m) away from any big metal object,wire(particularly wire mesh) or sheet metal structures, walls, ceilings, etc.Do not place the antennas in hidden places (behind walls)Place the receiver at least 5 ft. (1.5 m) away from any equipment that may emit RFradiation such as lighting racks, fluorescent lamps, digital effect units, or PCs

    Squelch

    Standard: Carrier squelch, manual Operates strictly on the signal strength of the signal. If received signal strength drops under the adjustable squelch threshold the

    audio output is muted

    Advanced: Tone Code (only WMS4000)

    The audio turns on only in the presence of the correct tone code and anadequate signal strength (-100dbm) Lock out all signals except ones with the correct key.

    Intermodulation

    Intermodulation is the result of two or more signals of different frequencies beingmixed together, forming additional signals that are not harmonic frequencies ofeither.

    By using more than one transmitter simultaneously at the same location, intermodulation

    happens in the receiver and/or transmitter. In your case this intermodulation productsare generated in the bandwidth that you are using.

    To avoid intermodulating frequencies, we offer you pre-calculated frequencies as presets inthe SR450 and SR4000 Receiver. Please, make sure that when setting up a multi channelsystem, all your receivers are set to the same country preset (NAME) and group. Use theAutomatic channel function (auto setup) to scan for free frequencies at your venue.

    Wolfgang Fritz / Feb. 2008MCS0802001

    4

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    5/52

    RG58 Cable Attenuation (MKPS, MKA5, MKA20 antenna cable)

    Cable Attenuation

    To obtain the best sound possible, you need to have the right RF input level throughoutyour signal chain. Premium quality wireless systems like the WMS450 and WMS4000,offer you adjustable RF-level settings that garantee to maximise operating distance evenwhen using different cable lenghts and different types of cable! For this purpose, AKGsPS4000W antenna splitter, has 3 dip switches that youll find on the right side of itsfront panel, behind the AKG logo.

    PS4000 dip switch

    This dip switch reduce the input RF level of the PS4000 between 0 dB and 14 dB.All antenna output level and the cascade(link) output level have an effect on this reduction.

    AB4000 dip switch

    The AB4000 has a fix 17.5dB amplifier in the output stage. The dip switch reduce theinput RF level of the AB4000 between 0 dB and -14 dB. AB4000 get the DC powerthrough the antenna cable from the PS4000 or an ASU4000 unit.

    Rear View

    4x Antenna A output(DC power)

    Antenna A input Ant. B

    Antenna A cascade output

    (DC power)

    dip switches behind AKG Logo

    Signal level adjustment

    Attenuation

    PS4000W Power Splitter

    AB4000 Antenna Booster

    Wolfgang Fritz / Feb. 2008MCS0802001

    Signal level adjustment

    InternalAttenuation

    Total Gain

    3.5 dB

    5.5 dB

    7.5 dB

    9.5 dB

    11.5 dB

    13.5 dB

    15.5 dB

    17.5 dB

    5

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    6/52

    3x MKA 20

    60m / 198ft

    Antenna Booster

    AB4000

    necessary !

    4x MKA 2080m / 264ft

    Antenna Booster

    AB4000

    necessary !

    MKA 5

    5m / 16ft

    MKA 20

    20m / 66ft

    MKA 5 + MKA 2025m / 82ft

    2x MKA 20

    40m / 132ft

    Cable type

    &

    Length

    0110E0189

    1m / 3ft

    PS4000 dip switch matrix (RG58 cable)

    RA4000 W SRA2 W RA4000 BW SRA2 BW

    Passiv Antennas Active Antennas

    Antenna type

    &

    Gain

    0 dB

    0 dB 0 dB -4 dB

    0 dB -2 dB -14 dB

    -8 dB -12 dB

    -6 dB -10 dB

    0 dB

    0 dB -2 dB

    RA4000 BW

    2x MKA 20

    AB4000

    0 dB

    PS4000

    -4 dB

    1x MKA 20

    SRA2 BW

    2x MKA 20

    AB4000

    0 dB

    PS4000

    -8 dB

    1x MKA 20

    RA4000 BW

    2x MKA 20

    AB4000

    0 dB

    PS4000

    0 dB

    2x MKA 20

    SRA2 BW

    2x MKA 20

    AB4000

    0 dB

    PS4000

    0 dB

    2x MKA 20

    1 dB 4-6 dB 18 dB 22-24 dB

    waveUHF Antenna

    You have to use this PS4000 dip switch settings at all PS4000 with direct connection

    to the antennas.

    All cascade PS4000 have the same dip switch setting ON/ON/ON (0dB)

    Wolfgang Fritz / Feb. 2008MCS0802001

    6

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    7/52

    Number of

    PS4000 ZAPD-21 MKPS PSU4000

    AC12 Power

    Supply PSU01/4000

    AC12 Power

    Supply HUB4000Q

    2 1 0 4 0 + 3 1 + 0 1

    3 1 0 6 0 + 4 1 + 0 1

    4 1 0 8 1 + 0 1 + 0 1

    5 1 0 10 1 + 0 1 + 1 1

    6 2 0 14 1 + 0 2 + 0 1

    7 2 0 16 1 + 0 2 + 0 1

    8 2 0 18 1 + 0 2 + 0 1

    9 2 0 20 1 + 0 2 + 1 2

    10 3 0 24 1 + 0 3 + 0 2

    11 3 0 26 1 + 0 3 + 0 2

    12 3 0 28 1 + 0 3 + 0 2

    13 3 0 30 1 + 1 3 + 1 2

    14 4 2 36 2 + 0 4 + 0 2

    15 4 2 38 2 + 0 4 + 0 2

    16 4 2 40 2 + 0 4 + 0 217 4 2 42 2 + 0 4 + 1 3

    18 4 2 44 2 + 0 4 + 2 3

    19 5 2 52 2 + 0 5 + 0 3

    20 5 2 54 2 + 0 5 + 0 3

    21 5 2 56 2 + 0 5 + 1 3

    22 5 2 58 2 + 0 5 + 2 3

    23 6 2 62 2 + 0 6 + 0 3

    24 6 2 64 2 + 0 6 + 0 3

    25 6 2 66 2 + 1 6 + 1 4

    26 6 2 68 2 + 2 6 + 2 4

    32 9 0 80 3 + 0 9 + 0 4

    36 9 0 88 3 + 4 9 + 4 5

    48 13 0 120 5 + 0 13 + 0 6

    52 13 0 128 5 + 2 13 + 4 6

    Additional you will need min. 2x antennas and 2x MKAxx antenna cables!

    Please, look at the "PS4000 dip switch matrix (RG58)" to find your antenna components.

    PSU01/4000 is a 12V/2A Power Supply Adapter (1x PSU4000 = 3x PSU01/4000)

    WMS

    Receiver

    Standard Power Supply! only available in US !

    Power Supply

    Wolfgang Fritz / Feb. 2008MCS0802001

    WMS450/4000 Component Matrix

    7

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    8/52

    Glossar

    SR4000 WMS4000 Stationary Receiver

    PS4000W Power Splitter 1:4 (Distribute RF signal and DC Power)

    Splits 1 antenna to 4 receiver

    Antenna cascade(Link) output to send RF-Signal to next PS4000.

    Cascade max. 3 PS4000.

    If you need more than 12 channels use an ZAPD in front of the first PS4000.

    PSU4000 Power Supply Unit with 3x 12 volt outputs (2.5A and 2A)

    SRA2 B/W Active Directional Antenna (21dB Gain)

    RA4000 B/W Active Omni-directional Antenna (18dB Gain)

    HPA4000 Headphone Amplifier (8x stereo jack inputs, 1 HP output)

    CU400 Charging Unit for WMS400/450 (2 transmitter / unit)

    ZAPD-21 Passive Combiner 2:1 and 1:2

    MKPS 0.65m/2 feet RG58 antenna cable

    MKA20 20/66ft RG58 antenna cable

    ASU4000 Antenna Supply Unit

    Supplies up to three active elements (RA4000BW, SRA2BW, AB4000)

    0110E01890 Front assembly cable

    Install wave antennas at the front of the rack

    AB4000 Antenna Booster

    3.5 dB 17.5 dB amplifier

    Front assembly cable & wave antenna

    Wolfgang Fritz / Feb. 2008MCS0802001

    Cable

    MKA5 5m/16ft RG58 antenna cable

    SR4000

    XLR

    AUDIO OUT

    ANT A IN

    DC IN (12V/0.5A)

    TS

    AUDIOOUT

    ANTB IN

    Mixer

    DATA

    LOGIC OUT

    1A

    1B

    2A

    2B

    3A

    3B

    4B

    4A

    ANT A IN ANT B IN

    DC IN (12V/0.5A)

    PS4000W

    CASCADE A

    CASCADE B

    DC OUT1 (2.5A)

    AC POWER

    PSU4000

    DC OUT 2 (2A)

    DC OUT 3 (2A)~90-230V

    SRA2 B/W

    ANTOUT

    RA4000 B/W

    ANTOUT

    HPA4000

    DCIN (12V/0.5A) Headphone

    SR1

    SR2

    SR3

    SR4

    SR5

    SR6

    SR8

    SR7

    CU4000

    DC IN (12V/1.4A)

    ZAPD-21

    A

    S

    B

    ASU4000

    ANTOUT

    ANTIN

    DC IN (12V/0.5A)

    AB4000

    ANTOUT

    ANTIN

    HUB4000QD C IN ( 1 2 V/ 0. 5A ) E TH ER NE T

    DEV1

    DEV2

    DEV3

    DEV4

    DEV5

    DEV6

    DEV8

    DEV7

    HUB4000Q Network Concentrator for 8 devices (SR4000 or SST4) Operate with Harman System Architect software - http://hiqnet.harmanpro.com

    8

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    9/52

    2 HT450 or PT450 charging system (optional)

    Project

    Designer

    Date Revision

    1 channel WMS450 system(SRA2 B/W Antennas)

    Wolfgang Fritz

    02.02.2008 1.0

    Build document1.0

    Ref.No.MCS0802001

    K171 Studio Headphone

    Headphone amplifier (optional)

    1 Channel WMS450 System

    With directional antennas & 40m antenna cable (132 feet)

    HPA4000

    DC IN (12V/0.5A) Headphone

    SR1

    SR2

    SR3

    SR4

    SR5

    SR6

    SR8

    SR7

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    AC12 Power Supply (500mA)

    AC12 Power Supply (500mA)

    ASU4000

    ANTOUT

    ANTIN

    DC IN (12V/0.5A)AC12 Power Supply (500mA)

    ASU4000

    ANTOUT

    ANT IN

    DC IN (12V/0.5A)AC12 Power Supply (500mA)

    2xMKPS

    BNC I-connector

    Available e.g. www.rs-components.com,

    Ordernumber 112-1798

    BNC I-connector

    Available e.g. www.rs-components.com,

    Ordernumber 112-1798

    2x MKA20

    (BNC I-connector is necessary to link cables!)

    2x MKA20

    (BNC I-connector is necessary to link cables!)

    SRA2 B/W

    ANTOUT

    SRA2 B/W

    ANT OUT

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTB IN

    Mixer

    9

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    10/52

    Wolfgang Fritz / Feb. 2008MCS0802001

    units description comment code

    1 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,

    batteries, user's manual; carrying case

    3235X....

    3236X....

    3237X....

    3238X....

    3239X....2 72 External directional active "paddle" antenna with amplifier (2 req.) 3009Z0001

    2 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206

    4 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    2 10 Antenna Supply unit for long antenna cables (BNC connector) without AC-Adapter 3009Z0010

    2 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000

    2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector

    (you can buy it at www.rs-components.com, Ordernumber 112-1798)

    units description comment code1 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000

    1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004

    1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001

    1 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000

    1 Channel WMS450 System with directional antennas, no PSU4000, no PS4000

    Optional Components (Charging System & Headphone Amplifier)

    CU 400

    SRA 2 B/W

    WMS 450

    MK PS

    MKA 20

    HPA 4000/ none

    K171 Studio

    AC 12

    ASU 4000 (BNC/none)

    AC 12

    10

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    11/52

    2 HT450 or PT450 charging system (optional)

    Project

    Designer

    Date Revision

    1 channel WMS450 system(RA4000 B/W Antennas)

    Wolfgang Fritz

    02.02.2008 1.0

    Build document1.0

    Ref.No.MCS0802001

    K171 Studio Headphone

    Headphone amplifier (optional)

    1 Channel WMS450 System

    with omni-directional antennas & 25m antenna cable (82 feet)

    HPA4000

    DC IN (12V/0.5A) Headphone

    SR1

    SR2

    SR3

    SR4

    SR5

    SR6

    SR8

    SR7

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    AC12 Power Supply (500mA)

    AC12 Power Supply (500mA)

    RA4000 B/W

    ANTOUT

    RA4000 B/W

    ANT OUT

    ASU4000

    ANTOUT

    ANTIN

    DC IN (12V/0.5A)AC12 Power Supply (500mA)

    ASU4000

    ANTOUT

    ANT IN

    DC IN (12V/0.5A)AC12 Power Supply (500mA)

    2xMKPS

    BNC I-connectorAvailable e.g. www.rs-components.com,

    Ordernumber 112-1798

    BNC I-connectorAvailable e.g. www.rs-components.com,

    Ordernumber 112-1798

    1x MKA20 + 1x MKA5

    (BNC I-connector is necessary to link cables!)

    1x MKA20 + 1x MKA5

    (BNC I-connector is necessary to link cables!)

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTB IN

    Mixer

    11

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    12/52

    units description comment code

    1 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,

    batteries, user's manual; carrying case

    3235X....

    3236X....

    3237X....

    3238X....

    3239X....2 66 External omni-directional active dipoleantenna with amplifier (2 req.) 2632Z0030

    2 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206

    4 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    2 10 Antenna Supply unit for long antenna cables (BNC connector) without AC-Adapter 3009Z0010

    2 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000

    2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector

    (you can buy it at www.rs-components.com, Ordernumber 112-1798)

    units description comment code1 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000

    1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004

    1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001

    1 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000

    1 Channel WMS450 System with omni-directional antennas, no PSU4000, no PS4000

    Optional Components (Charging System & Headphone Amplifier)

    CU 400

    RA 4000 B/W

    WMS 450

    MK PS

    MKA 20

    HPA 4000/ none

    K171 Studio

    AC 12

    ASU 4000 (BNC/none)

    AC 12

    Wolfgang Fritz / Feb. 2008MCS0802001

    12

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    13/52

    2 HT450 or PT450 charging system (optional)

    Project

    Designer

    Date Revision

    2 channel WMS450 system(SRA2 B/W Antennas, no PS4000, PSU4000)

    Wolfgang Fritz

    02.02.2008 1.0

    Build document1.0

    Ref.No.MCS0802001

    4xMKPS

    K171 Studio Headphone

    Headphone amplifier (optional)

    2 Channel WMS450 System

    With directional antennas & 40m antenna cable (132 feet)

    HPA4000

    DC IN (12V/0.5A) Headphone

    SR1

    SR2

    SR3

    SR4

    SR5

    SR6

    SR8

    SR7

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    AC12 Power Supply (500mA) AC12 Power Supply (500mA)

    AC12 Power Supply (500mA)

    ZAPD-21

    A

    S

    B

    ZAPD-21

    A

    S

    B

    ASU4000

    ANTOUT

    ANTIN

    DC IN (12V/0.5A)AC12 Power Supply (500mA)

    ASU4000

    ANTOUT

    ANT IN

    DC IN (12V/0.5A)AC12 Power Supply (500mA)

    2xMKPS

    BNC I-connector

    Available e.g. www.rs-components.com,

    Ordernumber 112-1798

    BNC I-connector

    Available e.g. www.rs-components.com,

    Ordernumber 112-1798

    2x MKA20

    (BNC I-connector is necessary to link cables!)

    2x MKA20

    (BNC I-connector is necessary to link cables!)

    SRA2 B/W

    ANTOUT

    SRA2 B/W

    ANT OUT

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIOOUT

    ANTB IN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANT A IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTB IN

    Mixer

    13

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    14/52

    units description comment code

    2 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,

    batteries, user's manual; carrying case

    3235X....

    3236X....

    3237X....

    3238X....

    3239X....2 72 External directional active "paddle" antenna with amplifier (2 req.) 3009Z0001

    6 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206

    4 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    2 10 Antenna Supply unit for long antenna cables (BNC connector) without AC-Adapter 3009Z0010

    2 4 12V AC-A dapt er for 1 P S 4000, ASU4000, HUB 4000, HPA 4000 or S R 4000. 7801H000

    2 88 passive power combiner (2in 1out) or Splitter (1in 2out) SERVSON76

    2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector

    (you can buy it at www.rs-components.com, Ordernumber 112-1798)

    units description comment code1 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000

    1 45 Headphone monitor ing amplif ier-8 receivers ins; & selectable out without AC Adapter 2998Z0004

    1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001

    1 412V AC-A dapt er for 1 P S 4000, ASU4000, HUB 4000, HPA 4000 or S R 4000. 7801H000

    2 Channel WMS450 System with directional antennas, no PSU4000, no PS4000

    Optional Components (Charging System & Headphone Amplifier)

    CU 400

    SRA 2 B/W

    WMS 450

    MK PS

    MKA 20

    HPA 4000/ none

    K171 Studio

    AC 12

    ASU 4000 (BNC/none)

    AC 12

    ZAPD21

    Wolfgang Fritz / Feb. 2008MCS0802001

    14

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    15/52

    2 HT450 or PT450 charging system (optional)

    Project

    Designer

    Date Revision

    2 channel WMS450 system(RA4000 B/W Antennas, no PS4000, PSU4000)

    Wolfgang Fritz

    02.02.2008 1.0

    Build document1.0

    Ref.No.MCS0802001

    4xMKPS

    K171 Studio Headphone

    Headphone amplifier (optional)

    2 Channel WMS450 System

    with omni-directional antennas & 25m antenna cable (82 feet)

    HPA4000

    DC IN (12V/0.5A) Headphone

    SR1

    SR2

    SR3

    SR4

    SR5

    SR6

    SR8

    SR7

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    AC12 Power Supply (500mA) AC12 Power Supply (500mA)

    AC12 Power Supply (500mA)

    RA4000 B/W

    ANTOUT

    RA4000 B/W

    ANT OUT

    ZAPD-21

    A

    S

    B

    ZAPD-21

    A

    S

    B

    ASU4000

    ANTOUT

    ANTIN

    DC IN (12V/0.5A)AC12 Power Supply (500mA)

    ASU4000

    ANTOUT

    ANT IN

    DC IN (12V/0.5A)AC12 Power Supply (500mA)

    2xMKPS

    BNC I-connector

    Available e.g. www.rs-components.com,

    Ordernumber 112-1798

    BNC I-connector

    Available e.g. www.rs-components.com,

    Ordernumber 112-1798

    1x MKA20 + 1x MKA5

    (BNC I-connector is necessary to link cables!)

    1x MKA20 + 1x MKA5

    (BNC I-connector is necessary to link cables!)

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIOOUT

    ANTB IN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANT A IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTB IN

    Mixer

    15

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    16/52

    units description comment code

    2 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,

    batteries, user's manual; carrying case

    3235X....

    3236X....

    3237X....

    3238X....

    3239X....2 66 External omni-directional active dipoleantenna with amplifier (2 req.) 2632Z0030

    6 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    2 56 16.5 ft. (5m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 2455Z0062

    2 10 Antenna Supply unit for long antenna cables (BNC connector) without AC-Adapter 3009Z0010

    2 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000

    2 88 passive power combiner (2in 1out) or Splitter (1in 2out) SERVSON76

    2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector

    (you can buy it at www.rs-components.com, Ordernumber 112-1798)

    units description comment code1 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000

    1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004

    1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001

    1 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000

    Optional Components (Charging System & Headphone Amplifier)

    2 Channel WMS450 System with omni-directional antennas, no PSU4000, no PS4000

    CU 400

    RA 4000 B/W

    WMS 450

    MK PS

    MKA 20

    HPA 4000/ none

    K171 Studio

    AC 12

    ASU 4000 (BNC/none)

    AC 12

    ZAPD21

    MKA 5

    Wolfgang Fritz / Feb. 2008MCS0802001

    16

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    17/52

    2 HT450 or PT450 charging system (optional)

    Project

    Designer

    Date Revision

    2 channel WMS450 system(SRA2 B/W An tennas, no PSU4000)

    Wolfgang Fritz

    02.02.2008 1.0

    Build document1.0

    Ref.No.MCS0802001

    MKA20MKA20

    4xMKPS

    K171 Studio Headphone

    Headphone amplifier (optional)

    2 Channel WMS450 System

    with directional antennas & 20(40)m antenna cable (66 or132 feet)

    up

    down

    -12dB

    2xMKA20

    (40m Cable)

    -2dB

    1xMKA20(20m Cable)

    40m / 132 ft Version:

    2x MKA20

    BNC I-connector is necessary to link cables!

    Available e.g. www.rs-components.com,

    Ordernumber 112-1798

    Rear View

    4x Antenna A output(DC power)

    Antenna A input Ant. B

    Antenna A cascade output

    (DC power)

    dip switches behind AKG Logo

    Signal level adjustment

    Attenuation

    PS4000W Power Splitter

    1A

    1B

    2A

    2B

    3A

    3B

    4B

    4A

    ANT A IN ANT B IN

    DC IN (12V/0.5A)

    PS4000W

    CASCADE A

    CASCADE B

    HPA4000

    DC IN (12V/0.5A) Headphone

    SR1

    SR2

    SR3

    SR4

    SR5

    SR6

    SR8

    SR7

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    SRA2 B/W

    ANT OUT

    SRA2 B/W

    ANT OUT

    AC12 Power Supply (500mA)

    AC12 Power Supply (500mA)

    AC-CU4000 Power Supply (1.4A) (recommend) orAC12 Power Supply (500mA)

    AC12 Power Supply (500mA)

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A) TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLRAUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TSAUDIO OUT

    ANTBIN

    Mixer

    17

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    18/52

    units description comment code

    2 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,

    batteries, user's manual; carrying case

    3235X....

    3236X....

    3237X....

    3238X....

    3239X....

    1 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008

    2 72 External directional active "paddle" antenna with amplifier (2 req.) 3009Z0001

    4 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    1 7 12V AC-Adapter (EU-Version) power supply CU4000, PS 4000 7801H000

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector

    (you can buy it at www.rs-components.com, Ordernumber 112-1798)

    units description comment code1 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000

    1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004

    1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001

    1 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000

    2 Channel WMS450 System with directional antennas, PSU4000

    Optional Components (Charging System & Headphone Amplifier)

    Additional parts for 40m(132feet) Antenna Cable

    CU 400

    SRA 2 B/W

    WMS 450

    PS 4000W

    MK PS

    MKA 20

    HPA 4000/ none

    K171 Studio

    AC 12

    AC-CU 4000

    MKA 20

    Wolfgang Fritz / Feb. 2008MCS0802001

    18

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    19/52

    2 HT450 or PT450 charging system (optional)

    Project

    Designer

    Date Revision

    2 channel WMS450 system(RA4000 B/W Antennas, no PSU4000)

    Wolfgang Fritz

    02.02.2008 1.0

    Build document1.0

    Ref.No.MCS0802001

    MKA20MKA20

    8xMKPS

    K171 Studio Headphone

    Headphone amplifier (optional)

    2 Channel WMS450 System

    with omni-directional antennas & 20(40)m antenna cable (66 or132 feet)

    up

    down

    -8dB

    2xMKA20

    (40m Cable)

    0dB

    1xMKA20(20m Cable)

    40m / 132 ft Version:

    2x MKA20

    BNC I-connector is necessary to link cables!

    Available e.g. www.rs-components.com,

    Ordernumber 112-1798

    Rear View

    4x Antenna A output(DC power)

    Antenna A input Ant. B

    Antenna A cascade output

    (DC power)

    dip switches behind AKG Logo

    Signal level adjustment

    Attenuation

    PS4000W Power Splitter

    1A

    1B

    2A

    2B

    3A

    3B

    4B

    4A

    ANT A IN ANT B IN

    DC IN (12V/0.5A)

    PS4000W

    CASCADE A

    CASCADE B

    HPA4000

    DC IN (12V/0.5A) Headphone

    SR1

    SR2

    SR3

    SR4

    SR5

    SR6

    SR8

    SR7

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    AC12 Power Supply (500mA)

    AC12 Power Supply (500mA)

    AC12 Power Supply (500mA)

    RA4000 B/W

    ANTOUT

    RA4000 B/W

    ANTOUT

    AC-CU4000 Power Supply (1.4A) (recommend) orAC12 Power Supply (500mA)

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A) TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLRAUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TSAUDIO OUT

    ANTBIN

    Mixer

    19

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    20/52

    units description comment code

    2 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,

    batteries, user's manual; carrying case

    3235X....

    3236X....

    3237X....

    3238X....

    3239X....1 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008

    2 66 External omni-directional active dipoleantenna with amplifier (2 req.) 2632Z0030

    4 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    1 7 12V AC-Adapter (EU-Version) power supply CU4000, PS 4000 7801H000

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector

    (you can buy it at www.rs-components.com, Ordernumber 112-1798)

    units description comment code1 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000

    1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004

    1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001

    1 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000

    2 Channel WMS450 System with omni-directional antennas, no PSU4000

    Optional Components (Charging System & Headphone Amplifier)

    Additional parts for 40m(132feet) Antenna Cable

    CU 400

    RA 4000 B/W

    WMS 450

    PS 4000W

    MK PS

    MKA 20

    HPA 4000/ none

    K171 Studio

    AC 12

    AC-CU 4000

    MKA 20

    Wolfgang Fritz / Feb. 2008MCS0802001

    20

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    21/52

    4 HT450 or PT450 charging system (optional)

    Project

    Designer

    Date Revision

    4 channel WMS450 system(SRA2 B/W An tennas, no PSU4000)

    Wolfgang Fritz

    02.02.2008 1.0

    Build document1.0

    Ref.No.MCS0802001

    MKA20MKA20

    8xMKPS

    K171 Studio Headphone

    Headphone amplifier (optional)

    4 Channel WMS450 System

    with directional antennas & 20(40)m antenna cable (66 or132 feet)

    up

    down

    -12dB

    2xMKA20

    (40m Cable)

    -2dB

    1xMKA20(20m Cable)

    40m / 132 ft Version:

    2x MKA20

    BNC I-connector is necessary to link cables!

    Available e.g. www.rs-components.com,

    Ordernumber 112-1798

    Rear View

    4x Antenna A output(DC power)

    Antenna A input Ant. B

    Antenna A cascade output

    (DC power)

    dip switches behind AKG Logo

    Signal level adjustment

    Attenuation

    PS4000W Power Splitter

    1A

    1B

    2A

    2B

    3A

    3B

    4B

    4A

    ANT A IN ANT B IN

    DC IN (12V/0.5A)

    PS4000W

    CASCADE A

    CASCADE B

    HPA4000

    DC IN (12V/0.5A) Headphone

    SR1

    SR2

    SR3

    SR4

    SR5

    SR6

    SR8

    SR7

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    SRA2 B/W

    ANT OUT

    SRA2 B/W

    ANT OUT

    AC12 Power Supply (500mA)

    AC12 Power Supply (500mA)

    AC12 Power Supply (500mA)

    AC12 Power Supply (500mA)

    AC-CU4000 Power Supply (1.4A)

    AC12 Power Supply (500mA)

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A) TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLRAUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TSAUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    21

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    22/52

    units description comment code

    4 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,

    batteries, user's manual; carrying case

    3235X....

    3236X....

    3237X....

    3238X....

    3239X....

    1 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008

    2 72 External directional active "paddle" antenna with amplifier (2 req.) 3009Z0001

    8 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    1 7 12V AC-Adapter (EU-Version) power supply CU4000, PS 4000 7801H000

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector

    (you can buy it at www.rs-components.com, Ordernumber 112-1798)

    units description comment code2 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000

    1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004

    1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001

    1 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000

    4 Channel WMS450 System with directional antennas, no PSU4000

    Optional Components (Charging System & Headphone Amplifier)

    Additional parts for 40m(132feet) Antenna Cable

    CU 400

    SRA 2 B/W

    WMS 450

    PS 4000W

    MK PS

    MKA 20

    HPA 4000/ none

    K171 Studio

    AC 12

    AC-CU 4000

    MKA 20

    Wolfgang Fritz / Feb. 2008MCS0802001

    22

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    23/52

    4 HT450 or PT450 charging system (optional)

    Project

    Designer

    Date Revision

    4 channel WMS450 system(RA4000 B/W Antennas, no PSU4000)

    Wolfgang Fritz

    02.02.2008 1.0

    Build document1.0

    Ref.No.MCS0802001

    MKA20MKA20

    8xMKPS

    K171 Studio Headphone

    Headphone amplifier (optional)

    4 Channel WMS450 System

    with omni-directional antennas & 20(40)m antenna cable (66 or132 feet)

    up

    down

    -8dB

    2xMKA20

    (40m Cable)

    0dB

    1xMKA20(20m Cable)

    40m / 132 ft Version:

    2x MKA20

    BNC I-connector is necessary to link cables!

    Available e.g. www.rs-components.com,

    Ordernumber 112-1798

    Rear View

    4x Antenna A output(DC power)

    Antenna A input Ant. B

    Antenna A cascade output

    (DC power)

    dip switches behind AKG Logo

    Signal level adjustment

    Attenuation

    PS4000W Power Splitter

    1A

    1B

    2A

    2B

    3A

    3B

    4B

    4A

    ANT A IN ANT B IN

    DC IN (12V/0.5A)

    PS4000W

    CASCADE A

    CASCADE B

    HPA4000

    DC IN (12V/0.5A) Headphone

    SR1

    SR2

    SR3

    SR4

    SR5

    SR6

    SR8

    SR7

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    AC12 Power Supply (500mA)

    AC12 Power Supply (500mA)

    AC12 Power Supply (500mA)

    AC12 Power Supply (500mA)

    AC-CU4000 Power Supply (1.4A)

    AC12 Power Supply (500mA)

    RA4000 B/W

    ANTOUT

    RA4000 B/W

    ANTOUT

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLRAUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TSAUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A) TS

    AUDIO OUT

    ANTBIN

    Mixer

    23

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    24/52

    units description comment code

    4 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,

    batteries, user's manual; carrying case

    3235X....

    3236X....

    3237X....

    3238X....

    3239X....

    1 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008

    2 66 External omni-directional active dipoleantenna with amplifier (2 req.) 2632Z0030

    8 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    1 7 12V AC-Adapter (EU-Version) power supply CU4000, PS 4000 7801H000

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector

    (you can buy it at www.rs-components.com, Ordernumber 112-1798)

    units description comment code2 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000

    1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004

    1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001

    1 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000

    4 Channel WMS450 System with omni-directional antennas, no PSU4000

    Optional Components (Charging System & Headphone Amplifier)

    Additional parts for 40m(132feet) Antenna Cable

    CU 400

    RA 4000 B/W

    WMS 450

    PS 4000W

    MK PS

    MKA 20

    HPA 4000/ none

    K171 Studio

    AC 12

    AC-CU 4000

    MKA 20

    Wolfgang Fritz / Feb. 2008MCS0802001

    24

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    25/52

    4 HT450 or PT450 charging system (optional)

    Project

    Designer

    Date Revision

    4 channel WMS450 system(SRA2 B/W Antennas)

    Wolfgang Fritz

    02.02.2008 1.0

    Build document1.0

    Ref.No.MCS0802001

    MKA20MKA20

    8xMKPS

    K171 Studio Headphone

    Headphone amplifier (optional)

    4 Channel WMS450 System

    with directional antennas & 20(40)m antenna cable (66 or132 feet)

    up

    down

    -12dB

    2xMKA20

    (40m Cable)

    -2dB

    1xMKA20(20m Cable)

    40m / 132 ft Version:

    2x MKA20

    BNC I-connector is necessary to link cables!

    Available e.g. www.rs-components.com,

    Ordernumber 112-1798

    Rear View

    4x Antenna A output(DC power)

    Antenna A input Ant. B

    Antenna A cascade output

    (DC power)

    dip switches behind AKG Logo

    Signal level adjustment

    Attenuation

    PS4000W Power Splitter

    1A

    1B

    2A

    2B

    3A

    3B

    4B

    4A

    ANT A IN ANT B IN

    DC IN (12V/0.5A)

    PS4000W

    CASCADE A

    CASCADE B

    DC OUT 1 (2.5A)

    AC POWER

    PSU4000

    DC OUT2 (2A)

    DC OUT3 (2A)~90-230V

    HPA4000

    DC IN (12V/0.5A) Headphone

    SR1

    SR2

    SR3

    SR4

    SR5

    SR6

    SR8

    SR7

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    SRA2 B/W

    ANT OUT

    SRA2 B/W

    ANT OUT

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A) TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLRAUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TSAUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    25

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    26/52

    units description comment code

    4 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,

    batteries, user's manual; carrying case

    3235X....

    3236X....

    3237X....

    3238X....

    3239X....1 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008

    2 72 External directional active "paddle" antenna with amplifier (2 req.) 3009Z0001

    8 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    1 60 Central Power supply unit for powering up to 3 WMS 4000 HUB 4000, HPA 4000, CU 4000 or up

    to 12 receivers via PS 4000, Mains Cable

    2997Z000

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector

    (you can buy it at www.rs-components.com, Ordernumber 112-1798)

    units description comment code2 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000

    1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004

    1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001

    4 Channel WMS450 System with directional antennas

    Optional Components (Charging System & Headphone Amplifier)

    Additional parts for 40m(132feet) Antenna Cable

    CU 400

    SRA 2 B/W

    WMS 450

    PS 4000W

    MK PS

    MKA 20

    PSU 4000

    HPA 4000/ none

    K171 Studio

    MKA 20

    Wolfgang Fritz / Feb. 2008MCS0802001

    26

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    27/52

    4 HT450 or PT450 charging system (optional)

    Project

    Designer

    Date Revision

    4 channel WMS450 system(RA4000 B/W Antennas)

    Wolfgang Fritz

    02.02.2008 1.0

    Build document1.0

    Ref.No.MCS0802001

    MKA20MKA20

    8xMKPS

    K171 Studio Headphone

    Headphone amplifier (optional)

    4 Channel WMS450 System

    with omni-directional antennas & 20(40)m antenna cable (66 or132 feet)

    up

    down

    -8dB

    2xMKA20

    (40m Cable)

    0dB

    1xMKA20(20m Cable)

    40m / 132 ft Version:

    2x MKA20

    BNC I-connector is necessary to link cables!

    Available e.g. www.rs-components.com,

    Ordernumber 112-1798

    Rear View

    4x Antenna A output(DC power)

    Antenna A input Ant. B

    Antenna A cascade output

    (DC power)

    dip switches behind AKG Logo

    Signal level adjustment

    Attenuation

    PS4000W Power Splitter

    1A

    1B

    2A

    2B

    3A

    3B

    4B

    4A

    ANT A IN ANT B IN

    DC IN (12V/0.5A)

    PS4000W

    CASCADE A

    CASCADE B

    DC OUT 1 (2.5A)

    AC POWER

    PSU4000

    DC OUT2 (2A)

    DC OUT3 (2A)~90-230V

    HPA4000

    DC IN (12V/0.5A) Headphone

    SR1

    SR2

    SR3

    SR4

    SR5

    SR6

    SR8

    SR7

    RA4000 B/W

    ANT OUT

    RA4000 B/W

    ANT OUT

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A) TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLRAUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TSAUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    27

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    28/52

    units description comment code

    4 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,

    batteries, user's manual; carrying case

    3235X....

    3236X....

    3237X....

    3238X....

    3239X....1 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008

    2 66 External omni-directional active dipoleantenna with amplifier (2 req.) 2632Z0030

    8 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    1 60 Central Power supply unit for powering up to 3 WMS 4000 HUB 4000, HPA 4000, CU 4000 or up

    to 12 receivers via PS 4000, Mains Cable

    2997Z000

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector

    (you can buy it at www.rs-components.com, Ordernumber 112-1798)

    units description comment code2 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000

    1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004

    1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001

    4 Channel WMS450 System with omni-directional antennas

    Optional Components (Charging System & Headphone Amplifier)

    Additional parts for 40m(132feet) Antenna Cable

    CU 400

    RA 4000 B/W

    WMS 450

    PS 4000W

    MK PS

    MKA 20

    PSU 4000

    HPA 4000/ none

    K171 Studio

    MKA 20

    Wolfgang Fritz / Feb. 2008MCS0802001

    28

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    29/52

    6 HT450 or PT450 charging system (optional)

    Project

    Designer

    Date Revision

    5 channel WMS450 system(SRA2 B/W Antennas)

    Wolfgang Fritz

    02.02.2008 1.0

    Build document1.0

    Ref.No.MCS0802001

    MKA20MKA20

    10xMKPS

    K171 Studio Headphone

    Headphone amplifier (optional)

    5 Channel WMS450 System

    with directional antennas & 20(40)m antenna cable (66 or132 feet)

    up

    down

    -12dB

    2xMKA20

    (40m Cable)

    -2dB

    1xMKA20(20m Cable)

    40m / 132 ft Version:

    2x MKA20

    BNC I-connector is necessary to link cables!

    Available e.g. www.rs-components.com,

    Ordernumber 112-1798

    Rear View

    4x Antenna A output(DC power)

    Antenna A input Ant. B

    Antenna A cascade output

    (DC power)

    dip switches behind AKG Logo

    Signal level adjustment

    Attenuation

    PS4000W Power Splitter

    1A

    1B

    2A

    2B

    3A

    3B

    4B

    4A

    ANT A IN ANT B IN

    DC IN (12V/0.5A)

    PS4000W

    CASCADE A

    CASCADE B

    DC OUT 1 (2.5A)

    AC POWER

    PSU4000

    DC OUT2 (2A)

    DC OUT3 (2A)~90-230V

    HPA4000

    DC IN (12V/0.5A) Headphone

    SR1

    SR2

    SR3

    SR4

    SR5

    SR6

    SR8

    SR7

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    SRA2 B/W

    ANT OUT

    SRA2 B/W

    ANT OUT

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLRAUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TSAUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A) TS

    AUDIO OUT

    ANTBIN

    Mixer

    29

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    30/52

    units description comment code

    5 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,

    batteries, user's manual; carrying case

    3235X....

    3236X....

    3237X....

    3238X....

    3239X....1 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008

    2 72 External directional active "paddle" antenna with amplifier (2 req.) 3009Z0001

    10 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    1 60 Central Power supply unit for powering up to 3 WMS 4000 HUB 4000, HPA 4000, CU 4000 or up

    to 12 receivers via PS 4000, Mains Cable

    2997Z000

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector

    (you can buy it at www.rs-components.com, Ordernumber 112-1798)

    units description comment code3 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000

    1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004

    1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001

    5 Channel WMS450 System with directional antennas

    Optional Components (Charging System & Headphone Amplifier)

    Additional parts for 40m(132feet) Antenna Cable

    CU 400

    SRA 2 B/W

    WMS 450

    PS 4000W

    MK PS

    MKA 20

    PSU 4000

    HPA 4000/ none

    K171 Studio

    MKA 20

    Wolfgang Fritz / Feb. 2008MCS0802001

    30

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    31/52

    6 HT450 or PT450 charging system (optional)

    Project

    Designer

    Date Revision

    5 channel WMS450 system(RA4000 B/W Antennas)

    Wolfgang Fritz

    02.02.2008 1.0

    Build document1.0

    Ref.No.MCS0802001

    MKA20MKA20

    10xMKPS

    K171 Studio Headphone

    Headphone amplifier (optional)

    5 Channel WMS450 System

    with omni-directional antennas & 20(40)m antenna cable (66 or132 feet)

    up

    down

    -8dB

    2xMKA20

    (40m Cable)

    0dB

    1xMKA20(20m Cable)

    40m / 132 ft Version:

    2x MKA20

    BNC I-connector is necessary to link cables!

    Available e.g. www.rs-components.com,

    Ordernumber 112-1798

    Rear View

    4x Antenna A output(DC power)

    Antenna A input Ant. B

    Antenna A cascade output

    (DC power)

    dip switches behind AKG Logo

    Signal level adjustment

    Attenuation

    PS4000W Power Splitter

    1A

    1B

    2A

    2B

    3A

    3B

    4B

    4A

    ANT A IN ANT B IN

    DC IN (12V/0.5A)

    PS4000W

    CASCADE A

    CASCADE B

    DC OUT 1 (2.5A)

    AC POWER

    PSU4000

    DC OUT2 (2A)

    DC OUT3 (2A)~90-230V

    HPA4000

    DC IN (12V/0.5A) Headphone

    SR1

    SR2

    SR3

    SR4

    SR5

    SR6

    SR8

    SR7

    RA4000 B/W

    ANT OUT

    RA4000 B/W

    ANT OUT

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLRAUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TSAUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A) TS

    AUDIO OUT

    ANTBIN

    Mixer

    31

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    32/52

    units description comment code

    5 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,

    batteries, user's manual; carrying case

    3235X....

    3236X....

    3237X....

    3238X....

    3239X....1 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008

    2 66 External omni-directional active dipoleantenna with amplifier (2 req.) 2632Z0030

    10 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    1 60 Central Power supply unit for powering up to 3 WMS 4000 HUB 4000, HPA 4000, CU 4000 or up

    to 12 receivers via PS 4000, Mains Cable

    2997Z000

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector

    (you can buy it at www.rs-components.com, Ordernumber 112-1798)

    units description comment code3 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000

    1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004

    1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001

    5 Channel WMS450 System with omni-directional antennas

    Optional Components (Charging System & Headphone Amplifier)

    Additional parts for 40m(132feet) Antenna Cable

    CU 400

    RA 4000 B/W

    WMS 450

    PS 4000W

    MK PS

    MKA 20

    PSU 4000

    HPA 4000/ none

    K171 Studio

    MKA 20

    Wolfgang Fritz / Feb. 2008MCS0802001

    32

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    33/52

    6 HT450 or PT450 charging system (optional)

    Project

    Designer

    Date Revision

    6 channel WMS450 system(SRA2 B/W Antennas)

    Wolfgang Fritz

    02.02.2008 1.0

    Build document1.0

    Ref.No.MCS0802001

    MKA20MKA20

    8xMKPS

    K171 Studio Headphone

    Headphone amplifier (optional)

    4xMKPS

    2xMKPS

    6 Channel WMS450 System

    with directional antennas & 20(40)m antenna cable (66 or132 feet)

    up

    down

    -12dB

    2xMKA20

    (40m Cable)

    -2dB

    1xMKA20(20m Cable)

    40m / 132 ft Version:

    2x MKA20

    BNC I-connector is necessary to link cables!

    Available e.g. www.rs-components.com,

    Ordernumber 112-1798

    up

    down

    0dB

    Rear View

    4x Antenna A output(DC power)

    Antenna A input Ant. B

    Antenna A cascade output

    (DC power)

    dip switches behind AKG Logo

    Signal level adjustment

    Attenuation

    PS4000W Power Splitter

    1A

    1B

    2A

    2B

    3A

    3B

    4B

    4A

    ANT A IN ANT B IN

    DC IN (12V/0.5A)

    PS4000W

    CASCADE A

    CASCADE B

    DC OUT 1 (2.5A)

    AC POWER

    PSU4000

    DC OUT2 (2A)

    DC OUT3 (2A)~90-230V

    HPA4000

    DC IN (12V/0.5A) Headphone

    SR1

    SR2

    SR3

    SR4

    SR5

    SR6

    SR8

    SR7

    1A

    1B

    2A

    2B

    3A

    3B

    4B

    4A

    ANT AIN ANT B IN

    DCIN (12V/0.5A)

    PS4000W

    CASCADE A

    CASCADE B

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    SRA2 B/W

    ANT OUT

    SRA2 B/W

    ANT OUT

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLRAUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TSAUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A) TS

    AUDIO OUT

    ANTBIN

    Mixer

    33

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    34/52

    units description comment code

    6 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,

    batteries, user's manual; carrying case

    3235X....

    3236X....

    3237X....

    3238X....

    3239X....2 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008

    2 72 External directional active "paddle" antenna with amplifier (2 req.) 3009Z0001

    14 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    1 60 Central Power supply unit for powering up to 3 WMS 4000 HUB 4000, HPA 4000, CU 4000 or up

    to 12 receivers via PS 4000, Mains Cable

    2997Z000

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector

    (you can buy it at www.rs-components.com, Ordernumber 112-1798)

    units description comment code3 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000

    1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004

    1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001

    6 Channel WMS450 System with directional antennas

    Optional Components (Charging System & Headphone Amplifier)

    Additional parts for 40m(132feet) Antenna Cable

    CU 400

    SRA 2 B/W

    WMS 450

    PS 4000W

    MK PS

    MKA 20

    PSU 4000

    HPA 4000/ none

    K171 Studio

    MKA 20

    Wolfgang Fritz / Feb. 2008MCS0802001

    34

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    35/52

    6 HT450 or PT450 charging system (optional)

    Project

    Designer

    Date Revision

    6 channel WMS450 system(RA4000 B/W Antennas)

    Wolfgang Fritz

    02.02.2008 1.0

    Build document1.0

    Ref.No.MCS0802001

    MKA20MKA20

    8xMKPS

    K171 Studio Headphone

    Headphone amplifier (optional)

    4xMKPS

    2xMKPS

    6 Channel WMS450 System

    with omni-directional antennas & 20(40)m antenna cable (66 or132 feet)

    up

    down

    -8dB

    2xMKA20

    (40m Cable)

    0dB

    1xMKA20(20m Cable)

    40m / 132 ft Version:

    2x MKA20

    BNC I-connector is necessary to link cables!

    Available e.g. www.rs-components.com,

    Ordernumber 112-1798

    up

    down

    0dB

    Rear View

    4x Antenna A output(DC power)

    Antenna A input Ant. B

    Antenna A cascade output

    (DC power)

    dip switches behind AKG Logo

    Signal level adjustment

    Attenuation

    PS4000W Power Splitter

    1A

    1B

    2A

    2B

    3A

    3B

    4B

    4A

    ANT A IN ANT B IN

    DC IN (12V/0.5A)

    PS4000W

    CASCADE A

    CASCADE B

    DC OUT 1 (2.5A)

    AC POWER

    PSU4000

    DC OUT2 (2A)

    DC OUT3 (2A)~90-230V

    HPA4000

    DC IN (12V/0.5A) Headphone

    SR1

    SR2

    SR3

    SR4

    SR5

    SR6

    SR8

    SR7

    RA4000 B/W

    ANT OUT

    RA4000 B/W

    ANT OUT

    1A

    1B

    2A

    2B

    3A

    3B

    4B

    4A

    ANT AIN ANT B IN

    DCIN (12V/0.5A)

    PS4000W

    CASCADE A

    CASCADE B

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A) TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLRAUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TSAUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    35

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    36/52

    units description comment code

    6 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,

    batteries, user's manual; carrying case

    3235X....

    3236X....

    3237X....

    3238X....

    3239X....2 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008

    2 66 External omni-directional active dipoleantenna with amplifier (2 req.) 2632Z0030

    14 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    1 60 Central Power supply unit for powering up to 3 WMS 4000 HUB 4000, HPA 4000, CU 4000 or up

    to 12 receivers via PS 4000, Mains Cable

    2997Z000

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector

    (you can buy it at www.rs-components.com, Ordernumber 112-1798)

    units description comment code3 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000

    1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004

    1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001

    6 Channel WMS450 System with omni-directional antennas

    Optional Components (Charging System & Headphone Amplifier)

    Additional parts for 40m(132feet) Antenna Cable

    CU 400

    RA 4000 B/W

    WMS 450

    PS 4000W

    MK PS

    MKA 20

    PSU 4000

    HPA 4000/ none

    K171 Studio

    MKA 20

    Wolfgang Fritz / Feb. 2008MCS0802001

    36

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    37/52

    8 HT450 or PT450 charging system (optional)

    Project

    Designer

    Date Revision

    8 channel WMS450 system(SRA2 B/W Antennas)

    Wolfgang Fritz

    02.02.2008 1.0

    Build document1.0

    Ref.No.MCS0802001

    MKA20MKA20

    8xMKPS

    K171 Studio Headphone

    Headphone amplifier (optional)

    8xMKPS

    2xMKPS

    8 Channel WMS450 System

    with directional antennas & 20(40)m antenna cable (66 or132 feet)

    up

    down

    -12dB

    2xMKA20

    (40m Cable)

    -2dB

    1xMKA20(20m Cable)

    40m / 132 ft Version:

    2x MKA20

    BNC I-connector is necessary to link cables!

    Available e.g. www.rs-components.com,

    Ordernumber 112-1798

    up

    down

    0dB

    Rear View

    4x Antenna A output(DC power)

    Antenna A input Ant. B

    Antenna A cascade output

    (DC power)

    dip switches behind AKG Logo

    Signal level adjustment

    Attenuation

    PS4000W Power Splitter

    1A

    1B

    2A

    2B

    3A

    3B

    4B

    4A

    ANT A IN ANT B IN

    DC IN (12V/0.5A)

    PS4000W

    CASCADE A

    CASCADE B

    DC OUT 1 (2.5A)

    AC POWER

    PSU4000

    DC OUT2 (2A)

    DC OUT3 (2A)~90-230V

    HPA4000

    DC IN (12V/0.5A) Headphone

    SR1

    SR2

    SR3

    SR4

    SR5

    SR6

    SR8

    SR7

    1A

    1B

    2A

    2B

    3A

    3B

    4B

    4A

    ANT AIN ANT B IN

    DCIN (12V/0.5A)

    PS4000W

    CASCADE A

    CASCADE B

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    SRA2 B/W

    ANT OUT

    SRA2 B/W

    ANT OUT

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A) TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLRAUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TSAUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLRAUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TSAUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    37

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    38/52

    units description comment code

    8 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,

    batteries, user's manual; carrying case

    3235X....

    3236X....

    3237X....

    3238X....

    3239X....2 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008

    2 72 External directional active "paddle" antenna with amplifier (2 req.) 3009Z0001

    18 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    1 60 Central Power supply unit for powering up to 3 WMS 4000 HUB 4000, HPA 4000, CU 4000 or up

    to 12 receivers via PS 4000, Mains Cable

    2997Z000

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector

    (you can buy it at www.rs-components.com, Ordernumber 112-1798)

    units description comment code4 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000

    1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004

    1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001

    8 Channel WMS450 System with directional antennas

    Optional Components (Charging System & Headphone Amplifier)

    Additional parts for 40m(132feet) Antenna Cable

    CU 400

    SRA 2 B/W

    WMS 450

    PS 4000W

    MK PS

    MKA 20

    PSU 4000

    HPA 4000/ none

    K171 Studio

    MKA 20

    Wolfgang Fritz / Feb. 2008MCS0802001

    38

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    39/52

    8 HT450 or PT450 charging system (optional)

    Project

    Designer

    Date Revision

    8 channel WMS450 system(RA4000 B/W Antennas)

    Wolfgang Fritz

    02.02.2008 1.0

    Build document1.0

    Ref.No.MCS0802001

    MKA20MKA20

    8xMKPS

    K171 Studio Headphone

    Headphone amplifier (optional)

    8xMKPS

    2xMKPS

    8 Channel WMS450 System

    with omni-directional antennas & 20(40)m antenna cable (66 or132 feet)

    up

    down

    -8dB

    2xMKA20

    (40m Cable)

    0dB

    1xMKA20(20m Cable)

    40m / 132 ft Version:

    2x MKA20

    BNC I-connector is necessary to link cables!

    Available e.g. www.rs-components.com,

    Ordernumber 112-1798

    up

    down

    0dB

    Rear View

    4x Antenna A output(DC power)

    Antenna A input Ant. B

    Antenna A cascade output

    (DC power)

    dip switches behind AKG Logo

    Signal level adjustment

    Attenuation

    PS4000W Power Splitter

    1A

    1B

    2A

    2B

    3A

    3B

    4B

    4A

    ANT A IN ANT B IN

    DC IN (12V/0.5A)

    PS4000W

    CASCADE A

    CASCADE B

    DC OUT 1 (2.5A)

    AC POWER

    PSU4000

    DC OUT2 (2A)

    DC OUT3 (2A)~90-230V

    HPA4000

    DC IN (12V/0.5A) Headphone

    SR1

    SR2

    SR3

    SR4

    SR5

    SR6

    SR8

    SR7

    RA4000 B/W

    ANT OUT

    RA4000 B/W

    ANT OUT

    1A

    1B

    2A

    2B

    3A

    3B

    4B

    4A

    ANT AIN ANT B IN

    DCIN (12V/0.5A)

    PS4000W

    CASCADE A

    CASCADE B

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A) TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLRAUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TSAUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLRAUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TSAUDIO OUT

    ANTBIN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANTBIN

    Mixer

    39

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    40/52

    units description comment code

    8 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,

    batteries, user's manual; carrying case

    3235X....

    3236X....

    3237X....

    3238X....

    3239X....2 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008

    2 66 External omni-directional active dipoleantenna with amplifier (2 req.) 2632Z0030

    18 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    1 60 Central Power supply unit for powering up to 3 WMS 4000 HUB 4000, HPA 4000, CU 4000 or up

    to 12 receivers via PS 4000, Mains Cable

    2997Z000

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector

    (you can buy it at www.rs-components.com, Ordernumber 112-1798)

    units description comment code4 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000

    1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004

    1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001

    8 Channel WMS450 System with omni-directional antennas

    Optional Components (Charging System & Headphone Amplifier)

    Additional parts for 40m(132feet) Antenna Cable

    CU 400

    RA 4000 B/W

    WMS 450

    PS 4000W

    MK PS

    MKA 20

    PSU 4000

    HPA 4000/ none

    K171 Studio

    MKA 20

    Wolfgang Fritz / Feb. 2008MCS0802001

    40

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    41/52

    10 HT450 or PT450 charging system (optional)

    Project

    Designer

    Date Revision

    9 channel WMS450 system(SRA2 B/W Antennas)

    Wolfgang Fritz

    02.02.2008 1.0

    Build document1.0

    Ref.No.MCS0802001

    MKA20MKA20

    8xMKPS

    K171 Studio Headphone

    Headphone amplifier (optional)

    8xMKPS

    2xMKPS 2xMKPS

    AC12 Power Supply (500mA)

    9 Channel WMS450 System

    with directional antennas & 20(40)m antenna cable (66 or132 feet)

    up

    down

    -12dB

    2xMKA20

    (40m Cable)

    -2dB

    1xMKA20(20m Cable)

    40m / 132 ft Version:

    2x MKA20

    BNC I-connector is necessary to link cables!

    Available e.g. www.rs-components.com,

    Ordernumber 112-1798

    up

    down

    0dB

    Rear View

    4x Antenna A output(DC power)

    Antenna A input Ant. B

    Antenna A cascade output

    (DC power)

    dip switches behind AKG Logo

    Signal level adjustment

    Attenuation

    PS4000W Power Splitter

    1A

    1B

    2A

    2B

    3A

    3B

    4B

    4A

    ANT A IN ANT B IN

    DC IN (12V/0.5A)

    PS4000W

    CASCADE A

    CASCADE B

    DC OUT 1 (2.5A)

    AC POWER

    PSU4000

    DC OUT2 (2A)

    DC OUT3 (2A)~90-230V

    HPA4000

    DC IN (12V/0.5A) Headphone

    SR1

    SR2

    SR3

    SR4

    SR5

    SR6

    SR8

    SR7

    1A

    1B

    2A

    2B

    3A

    3B

    4B

    4A

    ANT A IN ANT B IN

    DC IN (12V/0.5A)

    PS4000W

    CASCADE A

    CASCADE B

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    SRA2 B/W

    ANTOUT

    SRA2 B/W

    ANT OUT

    SR450

    XLR

    AUDIOOUT

    ANTA IN

    DC IN (12V/0.5A)TS

    AUDIO OUT

    ANT B IN

    Mixer

    SR450

    XLRAUDIOOUT

    ANTA IN

    DC IN (12V/0.5A)

    TSAUDIO OUT

    ANT B IN

    Mixer

    SR450

    XLR

    AUDIOOUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANT B IN

    Mixer

    SR450

    XLR

    AUDIOOUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANT B IN

    Mixer

    SR450

    XLR

    AUDIOOUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANT B IN

    Mixer

    SR450

    XLR

    AUDIOOUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANT B IN

    Mixer

    SR450

    XLRAUDIOOUT

    ANTA IN

    DC IN (12V/0.5A)

    TSAUDIO OUT

    ANT B IN

    Mixer

    SR450

    XLR

    AUDIOOUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANT B IN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)TS

    AUDIO OUT

    ANT B IN

    Mixer

    41

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    42/52

    units description comment code

    9 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,

    batteries, user's manual; carrying case

    3235X....

    3236X....

    3237X....

    3238X....

    3239X....2 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008

    2 72 External directional active "paddle" antenna with amplifier (2 req.) 3009Z0001

    20 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    1 60 Central Power supply unit for powering up to 3 WMS 4000 HUB 4000, HPA 4000, CU 4000 or up

    to 12 receivers via PS 4000, Mains Cable

    2997Z000

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector

    (you can buy it at www.rs-components.com, Ordernumber 112-1798)

    units description comment code5 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000

    2 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004

    1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001

    2 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000

    9 Channel WMS450 System with directional antennas

    Optional Components (Charging System & Headphone Amplifier)

    Additional parts for 40m(132feet) Antenna Cable

    CU 400

    SRA 2 B/W

    WMS 450

    PS 4000W

    MK PS

    MKA 20

    PSU 4000

    HPA 4000/ none

    K171 Studio

    AC 12

    MKA 20

    Wolfgang Fritz / Feb. 2008MCS0802001

    42

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    43/52

    10 HT450 or PT450 charging system (optional)

    Project

    Designer

    Date Revision

    9 channel WMS450 system(RA4000 B/W Antennas)

    Wolfgang Fritz

    02.02.2008 1.0

    Build document1.0

    Ref.No.MCS0802001

    MKA20MKA20

    8xMKPS

    K171 Studio Headphone

    Headphone amplifier (optional)

    8xMKPS

    2xMKPS 2xMKPS

    AC12 Power Supply (500mA)

    9 Channel WMS450 System

    with omni-directional antennas & 20(40)m antenna cable (66 or132 feet)

    up

    down

    -8dB

    2xMKA20

    (40m Cable)

    0dB

    1xMKA20(20m Cable)

    40m / 132 ft Version:

    2x MKA20

    BNC I-connector is necessary to link cables!

    Available e.g. www.rs-components.com,

    Ordernumber 112-1798

    up

    down

    0dB

    Rear View

    4x Antenna A output(DC power)

    Antenna A input Ant. B

    Antenna A cascade output

    (DC power)

    dip switches behind AKG Logo

    Signal level adjustment

    Attenuation

    PS4000W Power Splitter

    1A

    1B

    2A

    2B

    3A

    3B

    4B

    4A

    ANT A IN ANT B IN

    DC IN (12V/0.5A)

    PS4000W

    CASCADE A

    CASCADE B

    DC OUT 1 (2.5A)

    AC POWER

    PSU4000

    DC OUT2 (2A)

    DC OUT3 (2A)~90-230V

    HPA4000

    DC IN (12V/0.5A) Headphone

    SR1

    SR2

    SR3

    SR4

    SR5

    SR6

    SR8

    SR7

    RA4000 B/W

    ANTOUT

    RA4000 B/W

    ANT OUT

    1A

    1B

    2A

    2B

    3A

    3B

    4B

    4A

    ANT A IN ANT B IN

    DC IN (12V/0.5A)

    PS4000W

    CASCADE A

    CASCADE B

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    5V Power Supply (1.4 A)

    CU400

    DC IN (5V/1.4A)

    SR450

    XLR

    AUDIOOUT

    ANTA IN

    DC IN (12V/0.5A)TS

    AUDIO OUT

    ANT B IN

    Mixer

    SR450

    XLRAUDIOOUT

    ANTA IN

    DC IN (12V/0.5A)

    TSAUDIO OUT

    ANT B IN

    Mixer

    SR450

    XLR

    AUDIOOUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANT B IN

    Mixer

    SR450

    XLR

    AUDIOOUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANT B IN

    Mixer

    SR450

    XLR

    AUDIOOUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANT B IN

    Mixer

    SR450

    XLR

    AUDIO OUT

    ANTA IN

    DC IN (12V/0.5A)TS

    AUDIO OUT

    ANT B IN

    Mixer

    SR450

    XLR

    AUDIOOUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANT B IN

    Mixer

    SR450

    XLRAUDIOOUT

    ANTA IN

    DC IN (12V/0.5A)

    TSAUDIO OUT

    ANT B IN

    Mixer

    SR450

    XLR

    AUDIOOUT

    ANTA IN

    DC IN (12V/0.5A)

    TS

    AUDIO OUT

    ANT B IN

    Mixer

    43

    loaded from www.Manualslib.commanuals search engine

    http://www.manualslib.com/http://www.manualslib.com/
  • 8/22/2019 Wms 450 Schematic Part List

    44/52

    units description comment code

    9 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,

    batteries, user's manual; carrying case

    3235X....

    3236X....

    3237X....

    3238X....

    3239X....2 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008

    2 66 External omni-directional active dipoleantenna with amplifier (2 req.) 2632Z0030

    20 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206

    2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205

    1 60 Central Power supply unit for powering up to 3 WMS 4000 HUB 4000, HPA 4000, CU 4000 or up

    to 12 receivers via PS 4000, Mains Cable

    2997Z000

    2 55 66 ft. (20m)