GreenSpec Listed, energy and water efficient refrigerated model. Two-level station barrier-free stainless steel water cooler has recess- ed in-the-wall refrigeration system and stainless steel grill. Stain- less tubular steel support arm incorporates unique recess to be integrated with basin. All stainless steel polished to lustrous satin finish with high shined outer edge.Fountain has contoured basin to minimize splashing.Flexi-Guard StreamSaver water-efficient bubbler and easy to operate, fully functional vandal-resistant front push button.

In keeping with our committment to continuous improvement, Elkay reserves the right to change product specifications without notice.

This specification describes an Elkay product with design, quality and functional benefits to the user. When making a comparison of other producer’s offerings, be certain these features are notoverlooked.

GENERAL

®

Flow regulator provides constant stream from 20 to 105 psi water pressure.

Energy efficient refrigeration system utilizes a combination oftank continuous-tube type evaporator, refrigerant drier, andcapillary tube.

THIS WATER COOLER COMPLIES WITH THE REQUIRE-MENTS OF A.D.A. (AMERICANS WITH DISABILITIES ACT)WHEN PROPERLY INSTALLED. NO LEAD DESIGNTHIS WATER COOLER COMPLIES WITH THE LEAD-FREE DEFINITION IN THE SAFE DRINKING WATER ACT OF 1986AND LEAD CONTAMINATION CONTROL ACT OF 1988.

tem utlizing copper components and completely lead-free material. These waterways have no lead because all lead materials, such as leaded brass, have been removed. All joints are brazed using silver solder only. No lead solder is permitted. A strainer with an easily cleanable screen is pro- vided to allow trapping and convenient removal of waterborne particulate of 140 microns and larger prior to their entry into the water cooler.

COOLING SYSTEM Motor Compressor: Hermetically sealed, reciprocating type 115V, 60Hz, single phase. Sealed-in lifetime oil supply. Condenser: Fan cooled, copper tube with aluminum fins. Fanmotor is permanently lubricated.

Cooling Unit: Combination tube-tank type. Self cleansing. Tubeportion is continuous coil of copper tubing. Tank is stainlesssteel. Fully insulated with EPS foam which meets UnderwritersLaboratories Inc. requirements for self extinguishing material.Temperature Control: Enclosed adjustable thermostat is fac-tory preset. Requires no adjustment other than for altituderequirements.Refrigerant Control: Refrigerant HFC-134a is controlled by accurately calibrated capillary tube for positively trouble-free performance.CONSTRUCTIONFountain Body: #18 gauge, 300 series nickel bearing stainlesssteel basin polished to a lustrous satin finish with high shined outer edge. Contoured basin offers large strike area to mini- mize splashing. #16 gauge, 300 series tubular support arm

Exclusive Flexi-Guard StreamSaver Bubbler: ®

vent accidental mouth injuries. Flexes on impact, then returns to original position. Strong, abrasion-resistant. Anti-sweat.Bubbler meets UL requirements and all sanitary codes.Vandal-Resistant Bubbler (Option): One-piece, heavy Duty.Front Panel Grill: Made of 300 series stainless steel, polishedto a uniform Elkay satin finish. Removable louvered ventilating grill encloses refrigeration unit and plumbing. Wall Mounting Frame: MF200 frame furnished with each unit. Frame allows flush mounting to finished wall.

5 YEAR LIMITED WARRANTY on the refrigeration system of the unit. Electrical components and water system are war- ranted for 12 months from date of installation. Sample certifi- cation available upon request.

STANDARDS

Elkay 2222 Camden Court Oak Brook, IL 60523

Printed in U.S.A.©2015 Elkay

(1/15) 12-66elkay.com

GreenSpec Listed Two-Level SwirlFlo®

with WaterSentry VII Filter SystemBarrier-Free Access®

SPECIFICATIONS

CAPACITIES CHART

**Based on 80 F inlet water temperature °

*GPH of 50 F Drinking Water ° Full Glass Ship .

Model Base Room Temperature °F Rated Load Filler Wt.Number Rate 70°F 80°F 90°F Watts Amps Option Lbs.

7.5 9.3 8.3 7.5 260 2.8 No 140

Shown Model LRPBGRNM28K

This cooler is certified by WQA to lead-free compliance includingNSF/ANSI 61 and 372.

Elkay Electric Air Cooler Water Coolers are listedby Underwriters Laboratories Inc. and comply with both Canadian and U.S. requirements.

These units comply with A.R.I Standard 1010.

®

TM

innovative design utilizes a pliable polyester elastomer to pre-Elkay water coolers are manufactured with a waterway sys-

Water-efficient,

Rated watts shown are based on operational (run) time, in compliance with A.R.I. Standard 1010 conditions. Specific applications will determine the actual wattsconsumed per hour. Watts consumed will be based on number of people served per hour (usage), ambient temperatures and inlet water temperature.

Elkay Pressure-Type Water Coolers are designed to operate on 20 psi to 105 psi supply line pressure. If inlet pressure is above 105 psi, a pressure regulator must be installed in the supply line. Any damage caused by reason of connecting this product to supply line pressures lower than 20 psi or higher than 105 psi is not covered by the warranty.

incorporates unique recess to accept basin. Fully functional vandal-resistant push button is easy to operate.

NOTE: Minimum 40 psi supply line pressure required in spe-cial circumstances where both sides of bi-level are in usesimultaneously to ensure adequate stream height.

energy & water efficient

®

WATERSENTRY FILTER SYSTEM®

Elkay Water Cooler equipped with the WaterSentry VII Filter System, which is tested and certified to NSF/ANSI 42 and 53. Yields a reduction of soluble and insoluble lead content to less than 0.015mg/l. This translates to lead reduction levels of 93% to 99%. Class 1 particulate reduction as tested per NSF/ANSI 42. Removes over 97.5% of free available chlorine which pro- vides Class 1 performance as tested to NSF/ANSI 42. Provides taste and odor improvement.

MODELS LRPBGRNM(V)28K

LRPBGRNM(V)28K

G re e nS pe c ® L is te d Tw o-L e ve l S w ir lf lo®

W ith Wa te r S e ntr y® VI I F i lte r S ys te mB a r r ie r-F re e A c c e s sM ode ls LRPBGRNM(V)28K

®

®

R O U G H - I N D I M E N S I O N S

E lkay 2222 C amden C ourtOak B rook, IL 60523 elkay.com

P rinted in U.S .A.© 2015 E lkay

12-66A (R ev. 1/15

LR P B GR NM28K MOUNTING FR AME INS TR UC TIONS1. C ut a s quare rec tangular wall opening 37-1/2"

(476mm) W x 37-3/4" (959mm) H and 4-1/2"(114mm) above the floor line. These dimensionsare required to obtain proper rim and bubblerheights for compliance with ANS I s tandard.

2. R einforc e the wall opening on all s ides so that itwill adequately support the water fountain. Thisreinforcement must support up to 150 lbs s taticload and provide a means for securing the frameassembly in place. NO T E : B uilding c ons truc tion mus t allow foradequate air flow on both s ides and top of remotechiller unit. Minimum of 4" (102mm) is required.(S ee Figures 1 & 2)

3. Ins tall plumbing and elec tric al rough- ins . S eeFigure 1 for location of the supply water inlet tochiller and for the location of the waste wateroutlet. A junction box for a (3) wire, 10 amp branchcircuit is provided on the ins ide of the chiller.(S tandard 120 Volts , 60 Hz and s ingle phase)S ee Figure 2 for the electrical inlet location.

4. R emove frame as s embly and related hardwarefrom packaging. Attach the two frames togetherthru the upright supports with (4) 5/16" x 3/4"(19mm) long bolts and nuts (not provided).Tighten securely.NOT E : Frame with higher upper channel to be onleft s ide.

5. Ins tall the frame as s embly squarely in wallopening with frame upright support edges flushwith the finished wall face. S ecure the frame to thewall thru holes with (12) 5/16" x 2" (51mm) long lag bolts or screws (not provided). Tighten securely.NOT E : B e sure that frame is squared in location.Do not use less than required screw quantity ands ize.

6. Attac h the c hiller s helf s upport rods to the rights ide frame uprights at the second set of holescounting from the bottom and to the shelf at the(2) s ide holes . Line up the other shelf holes withthe frame bottom holes and fasten the assemblyto the wall us ing appropriately s ized wood screwsor bolts and nuts (not provided). (S ee Figure 2)

IM P O R TA NT !INS TA L L E R P L E A S E NO T E :

The grounding of electrical equipment such as tele-phone, computers , etc., to water lines is a commonprocedure. This grounding may be in the building ormay occur away from the building. This groundingcan cause electrical feedback into a water cooler,creating an electrolys is which causes a metallictaste or causes an increase in the metal content ofthe water. This condition is avoidable by using theproper materials as indicated below. The drain fittings which are provided by the installershould also be plastic to electrically isolate the coolerfrom the building plumbing system.

NOTE: WATERFLOWDIRECTIONSERVICE STOP(NOT FURNISHED)

3/8" O.D. TUBE CONNECTCOLD WATER SUPPLY1/4" O.D. TUBEWATER INLETTO COOLER BUILDING WATERINLET

NOTE: W ATE R FLOWDIRECTION

SERVICE STOP(NOT FURNISHED)

3/8" O.D. TUBE CONNECTCOLD W ATE R S UP P LY

1/4" O.D. TUBEWATE R INLE TTO COOLER

BUILDING W ATE RINLET

OPE R ATION OF QUIC K C ONNE C T FITTINGS

SIMPLY PUSH INTUBE TO A TTAC H

TUBE IS SECUREDIN POSITION

PUSH IN COLLETTO RELEASE TUBE

PUSHING TUBE IN BEFOREPULLING IT OUT HELPS TO

RELEASE TUBE

BA C

5/16" SCREWS OR BOLTS(12 REQ'D - NOT PROVIDED)37-3/4"(959mm)4-1/2"(114mm)1-1/8"(29mm)ELECTRICAL INLETLOCATION ON CHILLERTO FLOOR LINE8"(203mm)BACK OF WALLTO BE 12"(305mm)MIN. DEPTH5-1/8"(130mm)FLOOR LINE37-1/2"(953mm)CHILLER SHELFBOLT FRAMES TOGETHERWITH 5/16" X 3/4" (19mm) BOLTS(4 REQ'D - NOT PROVIDED)HOOK RODS (2)SCREWS OR BOLTS(NOT PROVIDED5/16" HEX NUT(4 REQ'D)(NOT PROVIDED)FRAMEWOOD OR STEEL FRAMESHOWN (NOT PROVIDED)

FIG. 1

FIG. 2

3-1/8"(79mm)1-1/8"(29mm)8-1/8"(206mm)9-3/8"(238mm)18-3/4"(476mm)

12"(305mm)MINIMUM DEPTH5/8"(16mm)18-3/8"(467mm)1-5/8"(41mm)1-5/8"(41mm)28-3/4"(730mm)36-1/2"(927mm)8"(203mm)4-1/2"(114mm)1-1/8"(29mm)11"(279mm)FINISHED FLOOR27"(686mm)ADAREQUIREMENT33-15/16"(863mm)41-11/16"(1059mm)

BACK WALL LINE20-7/16"(519mm)20-3/8"(517mm)2-7/8"(73mm)

3/8" O.D. COPPER TUBEWATER INLET ON CHILLERSHUT OFF VALVE BY OTHERS 3/8" O.D. COPPER TUBECOLD WATER OUTLET

ELECTRICAL INLET1-1/4" (32mm)WASTE TUBESFURNISHED2-7/8"(73mm) 14"(356mm)14"(356mm)38-1/2"(978mm)4-3/8"(121mm)

5-1/2"(140mm)

WaterSentry® VII Filter System

5/16" SCREWS OR BOLTS(12 REQ'D - NOT PROVIDED) 37-3/4"

(959mm)

4-1/2"(114mm)

1-1/8"(29mm)

ELECTRICAL INLETLOCATION ON CHILLER

TO FLOOR LINE

8"(203mm)

BACK OF WALLTO BE 12"(305mm)

MIN. DEPTH

5-1/8"(130mm)

FLOOR LINE

37-1/2"(953mm)

CHILLER SHELF

BOLT FRAMES TOGETHERWITH 5/16" X 3/4" (19mm) BOLTS(4 REQ'D - NOT PROVIDED)

HOOK RODS (2)

SCREWS OR BOLTS(NOT PROVIDED

5/16" HEX NUT(4 REQ'D)

(NOT PROVIDED)

FRAME

WOOD OR STEEL FRAMESHOWN (NOT PROVIDED)

FIG. 1

FIG. 2

3-1/8"(79mm)1-1/8"

(29mm)

8-1/8"(206mm)

9-3/8"(238mm)

18-3/4"(476mm)

12"(305mm)

MINIMUM DEPTH5/8"

(16mm)18-3/8"(467mm)

1-5/8"(41mm)

1-5/8"(41mm)

28-3/4"(730mm)

36-1/2"(927mm)

8"(203mm)4-1/2"

(114mm)

1-1/8"(29mm)11"

(279mm)

FINISHED FLOOR

27"(686mm)

ADAREQUIREMENT

33-15/16"(863mm)

41-11/16"(1059mm)

BACK WALL LINE

20-7/16"(519mm)

20-3/8"(517mm)

2-7/8"(73mm)

3/8" O.D. COPPER TUBEWATER INLET ON CHILLERSHUT OFF VALVE BY OTHERS

3/8" O.D. COPPER TUBECOLD WATER OUTLET

ELECTRICAL INLET

1-1/4" (32mm)WASTE TUBES

FURNISHED

2-7/8"(73mm)

14"(356mm)

14"(356mm)

38-1/2"(978mm)

4-3/8"(121mm)

5-1/2"(140mm)

Wate rS entry® VII Filter S ystem

Flexi-Guard® Bubbler (standard)

Vandal-Resistant Bubbler (optional)