What’s in the Blue Print Tool Case?low_res).pdfZZZ DS WHFK FR XN DSWHFK#DQGUHZSDJH FRP 3 6
Transcript of What’s in the Blue Print Tool Case?low_res).pdfZZZ DS WHFK FR XN DSWHFK#DQGUHZSDJH FRP 3 6
HOFMANN MEGAPLAN, CRYPTONLIFTMASTEREMISSIONSBRADBURYTECALEMIT
BOSCHDELPHI, HICKLEYS, MAVERICK
ALBA, DRAPER, SYKES PICKAVANT, UNIVERSAL, HARVIE CHICAGO, MILWAUKEE, RING, REDASHESIP, MAJOR LIFT, WEBER, KÄRCHER, FACOMBLUEPRINT
THERMOBILEFPS
What’s in theBlue Print Tool Case?
The Complete Solutionfor Asian & AmericanVehicle Parts www.blue-print.com
Blue Print is a bilstein group brand
SEE PAGES8&9
megamount 503 EVO • Totally ‘leverless’ operation
• 12” to 26” Clamping range
• Includes ‘megafit 2’ assist arm
• Includes special BMW kit for breaking the bead on BMW run-flats
• 2 Year warranty
Part No: MOUNT503 EVO
LEASE FROM £26.80 PER WEEK
Buy this tyre changer, get the Junior
Balancer completely
FREE!!
Fully Automatic Tyre Changer with Assist Arm & Electronic Wheel Balancer WC5521 & WC5301AA
Part No: WC5301AA
LEASE FROM £9.93 PER WEEK
Part No: WC5521
LEASE FROM £7.48 PER WEEK
• Fully automatic tyre changer with assist arm
• Capacity 12”-24” wheels clamped on the outside and 13”-26” on the inside
• Electronic wheel balancer, easy to use operation allows for quick turnaround of wheel balancing
• Rim width measuring calliper, wheel weight pliers/ hammer, 3 x standard cones
• Delivery, installation and basic operation training included
GREAT TYRE PACKAGE DEAL!
d
ws
Part No: WC5301AA
: WC5301AA
Part No: WC5521
WC5301AA& WC5521
PACKAGE £2499SAVING £746LEASE FROM £13.41
PER WEEK
2 2
Heavy Duty Coil Spring Compressor• Auto levelling upper arms allow the operator to work easily on both conical & misaligned springs• Cylinder is made in light alloy & nylon resin with fiberglass to avoid corrosion & oxidisation• Foot-pedal works only when the safety valve is closed• Supplied with small & large jaws & strut vice• Working pressure: min 6 bar., max 10 bar• Cylinder stroke: 330 mm• Compression force: 1960Kg @ 10 BAR
Part No: ALB40170
Portable Pressure Brake Bleeder • Pressure bleeding is the only method approved by brake manufacturers• Full fluid change can be completed in approx. 15mins by a single operator• Fully adjustable pressure regulator, 0 - 3.0 bar• Draws fluid direct from 5ltr container • Auto cut-off prevents air entering system if fluid supply is interrupted• Portable unit with carry handle - only 9.0kg• Operates off 12v supply (vehicle battery)• Storage facility for brake fluid container (5 ltr) & multi vehicle cap set (ALB30564B - supplied with ALB598 & ALB599)
Part No: ALB598MVC
Pressure Bleeder Hand-Pump • Easy one-person operation • Simple hand-pump operation to create pressure • Portable • Supplied with European cap adaptor • 3 Litre capacity Also available: ALB30583 Multivehicle cap
Part No: ALB30570
Hybrid 1000V Automotive Multimeter • OTC 1000V CAT III Hybrid multimeter with insulation test
• A full function multimeter with an insulation test feature which is used to test for voltage leaks through the cable insulation found on hybrid & electric vehicles
Part No: OTC3990
Power Probe Hook All the features of a PowerProbe – plus all of the following!
Activate Components• Watch real time current and resistance• Up to 100amps inrush current, 25 amps constant• Adjustable current protection, up to 65amps
Intermittent Circuit Testing• Min / max mode for current, voltage and resistance
Hot Shot Mode• Load test power and grounds in only 7 milliseconds ( pass/fail shown on screen )
Voltage Drop• See battery voltage and voltage drop on screen
Smart Tip Technology• Automatically selects the ohmeter, or voltmeter function and selects the correct range• Operation 12V to 48VPart No: PPH1
Full PowerProbe range now available – ask for more details
Coil Spring Compressor• 1500kg (14800Nm) Maximum jaw loading• Supplied with 3 pairs of drop-forged jaws (80 - 110mm diameter, 88 - 160mm diameter & 126 - 212mm diameter)• Safety jaws carefully shaped to prevent coil spring from bowing• Also comes with adaptor for asymmetrical springs• Suitable for use with air impact wrenches or with 21mm combination spanner
Part No: ALB30859
Full OTC range now available – ask for more details
Under Bonnet LampManufactured with magnetic swivel end caps enabling the lamp to be attached to the metal surfaces, also fitted with an under bonnet hanger for attaching to car bonnets. Lamp unit can swivel 90° in its holder and has a 60 LED function for longer battery life. Uses Ni-MH integral battery with a five hour (max.) charging time. Supplied with BS approved 3 pin 230V charger
Part No: 24370
12/24v Booster PackPower pack ideal for automotive, light commercial, HGV, marine, agricultural and construction equipment. Capable of starting all 12V and 24V petrol engines up to 4000cc; 12V diesel engines up to 15,000cc; 24V diesel engines and up to 8000cc marine diesel engines.
Part No: 45015
Knipex Hose Clip PlierExceptionally versatile hose clamp pliers fitted with rotating grip inserts. Used for removing spring band rings, standard or space saving clamps and simple spring wire hose clamps found in older vehicles and household appliances. The quick-set 25 positiion adjustment provides easy alteration for precise and repetitive working, useful when working with reinforced or very large spring band clamps.
Part No: 38389
Knipex 3pc Plier SetComprising three commonly used types of pliers.
Contents: 180mm combination pliers with slipguards; 200mm long nose pliers with slipguards; 160mm diagonal side cutters with slipguards
Part No: 33778
12/24v Starter Charger For garage and workshop use. With trolley wheels for easy movement around the workshop or yard. The starter/charger has thermal overload protection, battery timer, an easy-to-read ammeter, polarity inversion and transport handle. Insulated copper leads. Uses 2 x 50A fuses. Part No: 11967
E.P.B Service ToolDesigned and manufactured to be used for safe replacement of brake pads on vehicles fitted with an EPB (electronic parking brake). Large easy to read backlit LCD screen with micro USB socket for updates via the internet. Can be used on Audi, Ford, Mercedes Benz, Volkswagen and Volvo. Supplied in carrying case with standard 16 pin EOBD connector.
Part No: 23660
Mode 6 Fault Code Reader For the interrogation of engine management systems and the display and cancellation of diagnostic trouble codes (DTC’s) in petrol, diesel and hybrid vehicles. Compatible with all EOBD petrol 2001 and diesel 2004 onwards and OBDII (US) 1996 onwards systems. This reader will read and display malfunction indicator status (MIL), over 27,000 generic codes and manufacturer’s vehicle specific codes, carries out ‘Mode 6’ displays, freeze frame, live data and VIN, display emissions status and graphs live engine data. Has standard 16pin EOBD connector with 790mm (approx.) cable.
Part No: 21980
Knipex Cobra Waterpump PlierExpert quality, manufactured from chrome vanadium electric steel, oil-hardened and tempered, with smoothly ground jaws, joint faces and an accurately formed box joint with safety stop. The parallelogram- shaped gripping surfaces have specially hardened teeth to 61 HRC for positive grip on pipes and nuts. One hand press button adjustment. Plastic-coated handles with slip guards for extra safety. Has ‘no-nip’ feature which prevents handles locking together and injuring hands.
Part No: 30737
3 3
1/2” High-Low Torque Impact Wrench Ideal for heavy wheel work and most suspension /steering joints and crankshaft timing bolts.Product specification:Speed: 6,500 rpmMax torque: 800 ft lbs (1085 Nm)Average air consumption: 5 cfmNett weight: 1.99 kgs (4.4 lbs)Vibration level: 3.2 m/sec2Air inlet: 1/4 BSP”Part No: UT8176
1” In Line Wrench 8” Anvil Heavy duty truck tyre shop applications, durable design with extended shank for double wheels.Product specification:Speed: 4,500 rpmMax torque: 1800 ft lbs (2440 Nm)Average air consumption: 12 cfmLength: 521 mm (20.5 ins)Width: 180 mm (7.1 ins)Nett weight: 13.2 kgs (29 lbs)Vibration level: 9.5 m/sec2Sound pressure: 108.4 db(A)Square drive: 1”Air inlet: 1/2 BSP”Part No: UT8419
3/8” Reversible Drill - Keyless 1800rpm Powerful 0.5 HP Motor for superior stall resistance.Tease trigger for ultimate operator control. Low weight due to high grade composite materialsProduct specification:Chuck size: 3/8 insChuck type: keyless (Jacobs) Speed: 1,800 rpmPower output: 0.5 HP (373 watts)Average air consumption: 4.0 cfmLength: 193 mm (7.6 ins)Nett weight: 0.9 kgs (2 lbs)Vibration level: 1.2 m/sec2Sound pressure: 91.0 db(A)Thread size: 3/8’ x 24mm UNF Air inlet: 1/4 BSP”
Part No: UT8823
1/2” Reactionless Ratchet Wrench Industrial quality reactionless ratchet wrench which protects the operative from “Wrist Snap” when maximum torque is reached.Product specification:Speed: 400 rpmMax torque: 75 ft lbs (102 Nm)Average air consumption: 4 cfmLength: 280 mm (11 ins)Nett weight: 1.28 kgs (2.8 lbs)Vibration level: 9.9 m/sec2Square drive: 3/8”Air inlet: 1/4 BSP”
sec2
800 ft lbs (2440 Nm)onsumption: 12 cfmmm (20.5 ins)m (7.1 ins)
.2 kgs (29 lbs)9.5 m/sec2
108.4 db(A)
”9
oto ProChucChuckSpeed: Power ouAverage aLength: 193Nett weight: Vibration levelSound pressureThread sizeAir inl
Snap” d.
75 ft lbs (102 Nm)air consumption: 4 cfm
0 mm (11 ins) 1.28 kgs (2.8 lbs)l: 9.9 m/sec23/8”
P”
Part No: UT8001R3/8” UT80011R1/2”
ersible Drill 1800rpm
r
ltimateLow weight due
mposite materialscation:sss (Jacobs)
m5 HP (373 watts)mption: 4.0 cfm7.6 ins)
Ford Transit Hub & Front Wheel Bearing Remover Kit• New tool for Ford Transit Mk6 & Mk7 Hub and complete front wheel bearing removal
• Features a heavy duty slide hammer which operates in two directions to achieve multiple operations in one tool
• Provides three different solutions in one kit:- Can be used as a traditional hub puller- Use the slide hammer in the reverse direction to remove the outer bearing race- Remove the stubborn inner bearing race
Part No: 08254500
UPDATED Diesel Injector Seat Cleaner Set • Cleans injector seats and chambers when changing or reconditioning diesel injectors
• Helps to avoid blow-back due to poorly seated injectors
• Now includes:- Removal tool for copper washers- Injector blanking plugs to avoid debris entering the cylinders- Wire brush cleaning set for chamber walls- Centralising stem to improve correct cleaning of seating angle
Part No:017500V2
Battery & Electrical Systems Tester • Higher performance model for batteries rated from 100 – 1200 CCA• Suitable for luxury and 4x4 vehicles with higher level electronic systems• Determines the state of a battery and electrical system• Simple & accurate tests - without heat or sparks being created• Integrated printer for immediate review with customer
Part No: MDX390AP
INCLUDES FREE OF CHARGE Elwis H120A Headlight torch with zoom – remote battery pack - 60120 - WORTH £22.95
Universal Clutch Alignment Tool Kit• For modern front wheel drive vehicles with or without pilot / spigot bearings with flywheel fitting diameters from 12 – 20mm
• The tools main advantage is that it includes parallel expanding supports in place of more traditional tapered fittings that are hard to keep located
• Easy to swap over adaptors suitable for clutch centre sizes from 14.4 to 29mm
• Includes small cone: 14.4 - 21mm, large cone: 20.9 - 29mm & sleeves: 12, 14, 15, 16, 17, 18, 19, 20mm
Part No: 01370300
Land Rover Drop Arm Puller • Extra heavy duty puller for the removal of drop arms from the toughest of vehicle applications
• Ideal for Land Rover Discovery 1 & 2, Range Rover P38, Land Rover Defender and Ford Transit applications
• The puller is designed to be used with the steering box already removed from the vehicle
• Includes a force screw allowing a technician to effectively shock the drop arm to become loose from the steering box
• Jaw spread capacity - 60mm
• Jaw reach capacity - 80mm
Part No: 05050000
Universal Digital Torque Angle Gauge • For turning torqued fasteners through a further angle, as per vehicle manufacturers’ specifications• Simple to use: Calibrate, set angle, mount and use• Fits onto most ratchets, torque wrenches and power bars• Magnetic attachment• One single tool can be used on 1/4”, 3/8”, 1/2”, 3/4” drives• Indicates increasing angle on LCD display• Works in both directions of rotation• Audible notice when setting reachedPart No: 80093500
Diesel Compression Test Kit for Common Rail Diesel (CRD) Engines • Specifically designed to cover a wide range of modern CRD engines• Includes 15 x dummy glow plugs – specially designed to cover as wide a range of CRD applications as possible• Also includes a dummy CRD injector and clamps to allow for testing if it is more acceptable to remove the injector• Supplied with 83mm – 60bar pressure gauge to BS1780 standard• Includes applications listPart No: 31427500
Golf V Control / Trailing Arm Bush Kit • Heavy duty mechanical kit for replacing and removing control / trailing arm bushes
• Suitable for:VW Golf V, VI 2003-VW Golf Plus 2005-VW Eos 2006-VW Touran 2003-VW Jetta III, IV 2005-VW Scirocco 2008-VW Passat 2005-VW Tiguan 2007-VW Sharan 2010-Audi A3 2003-, Audi TT 2006-Seat Altea 2004-, Seat Leon 2004-, Seat Toledo `04 - `09, Seat Alhambra 2010-Skoda Octavia 2004-, Skoda Superb 2008-, Skoda Yeti 2009-
Part No: 08760300
DRIVEMASTER ALLOY WHEEL WEIGHTS
PREMA COMBI REPAIRSPREMA Combi repairs can be used for crown injuries only. Prepare the injury using the appropriate PREMA carbide cutter. The PREMA Combi repair comes with a guide wire, fills and seals the injury and repairs the inner liner all in one easy step. Install with PREMA ultra fast dry vulcanising cement. NOTE: The Prema Combi may only be used when the angle of the injury is LESS THAN 25°. If the injury angle is GREATER THAN 25°, repair with the appropriate two-piece stem and repair unit.
FULL RANGE OF TYRE CONSUMABLES AVAILABLE. ASK YOUR LOCAL BRANCH FOR DETAILS.
Part No Description Qty PriceHCCAW05 ZN UNIVERSAL ALLOY WHEEL WEIGHT - COATED - 5G 100 £4.95HCCAW10 ZN UNIVERSAL ALLOY WHEEL WEIGHT - COATED - 10G 100 £6.35HCCAW15 ZN UNIVERSAL ALLOY WHEEL WEIGHT - COATED - 15G 100 £9.95HCCAW20 ZN UNIVERSAL ALLOY WHEEL WEIGHT - COATED - 20G 100 £12.65HCCAW25 ZN UNIVERSAL ALLOY WHEEL WEIGHT - COATED - 25G 100 £15.95HCCAW30 ZN UNIVERSAL ALLOY WHEEL WEIGHT - COATED - 30G 100 £18.95HCCAW35 ZN UNIVERSAL ALLOY WHEEL WEIGHT - COATED - 35G 50 £10.95HCCAW40 ZN UNIVERSAL ALLOY WHEEL WEIGHT - COATED - 40G 50 £12.95HCCAW45 ZN UNIVERSAL ALLOY WHEEL WEIGHT - COATED - 45G 50 £14.25HCCAW50 ZN UNIVERSAL ALLOY WHEEL WEIGHT - COATED - 50G 50 £15.95HPASTE UNIVERSAL MOUNTING PASTE 5KG £5.95HBRUSH PLASTIC HANDLED MOUNTING PASTE BRUSH £1.45HRIMTITE WHEEL SEAL FOR ALLOY & POROUS WHEELS 5KG £22.95
Part No Description Qty Price
HPUS-2 UNIVERSAL SQUARE 2, APPROX 43 MM X 43 MM 100 £18.95
HPC-1 COMBI 1, 3 MM STEM FOR UP TO 1.5 MM INJURY - DIPPED STEM 40 £27.95
HPC-1.5 COMBI 1, 3 MM STEM FOR 1,5-3 MM INJURY - DIPPED STEM 40 £29.95
HPC-2J COMBI 2, 6 MM STEM FOR 4-6 MM INJURY (JUMBO PACK) GUM ON STEM 40 £30.95
HVL-PC2 COMBI 2, 6 MM STEM FOR 4-6 MM INJURY (JUMBO PACK) DIPPED STEM 40 £30.95
HEC2-40 ECO COMBI 2, 6 MM STEM FOR 4-6 MM INJURY (JUMBO PACK) GUM ON STEM 40 £22.95
HPC-3J COMBI 3, 8 MM STEM FOR 6-8 MM INJURY (JUMBO PACK) 20 £22.95
HPC-4 COMBI 4, 10 MM STEM FOR 10 MM INJURY 10 £24.95
4
3/8” Impact Wrench Features• Composite handle and magnesium clutch housing• 3 Positive power settings• Full power in reverse• Lightweight and low noise level tool
Benefits• Maximises operator comfort with an extremely well balanced tool
Part No: CP7729
1” Impact Wrench Features• Insulating and lightweight composite handle• Magnesium clutch housing• Lightweight and low noise level tool• Full teasing trigger
Benefits• Maximises operator comfort with a productive and lightweight tool
Part No: CP7779
3/4” Impact Wrench Features• Insulating and lightweight composite handle• Magnesium clutch housing• Lightweight and low noise level tool• Full teasing trigger
Benefits• Maximises operator comfort with a productive and lightweight tool
Part No: CP7769
CP77X9 Impact Wrench Series: Compact & Lightweight Tools with Exceptional POWER! S2S Technology is the market’s most convenient one handed impact wrench design. The operator can change between forward and reverse with one hand in any position. This means less stress / fatigue on the operator’s wrist and arm when changing between forward and reverse. It decreases the weight of the tool and improves the overall balance of the tool.
1/2” Impact Wrench Features• Composite handle and magnesium clutch housing• 3 Positive power settings• Full power in reverse• Lightweight and low noise level tool
Benefits• Maximises operator comfort with an extremely well balanced tool
Part No: CP7739
1/2” Twin Hammer Impact Wrench Features• Composite handle and magnesium clutch housing• 3 Positive power settings• Full power in reverse• Twin hammer clutch
Benefits• Maximises operator comfort with an extremely well balanced tool
Part No: CP7749
1/2” Impact Wrench Features• Composite and carbon fibre impact wrench• Integrated muffler for low noise• Lightweight with a magnesium clutch housing• 360o air inlet swivel
Benefits• Extremely lightweight tool• Maximises comfort and power
Part No: CP7759Q
Black Heated Jacket (No Battery)• New heating zones, multi-zone controller for heating different zones• Powered by M12™ LITHIUM-ION technology from M12 fuel models, provides heat for up to 6 hours of run-time • USB Power port to charge electrical devices, charge phones / MP3 players whilst on the move• Five sewn in carbon fibre heating zones, provides comfortable and durable heating element• Three heat settings with easy touch controller high, medium, and low settings for differing heat needs• Advanced cold weather technology, multi-layered fabric to actively warm the body and stimulate blood circulation• Water and wind resistant provides comfort and durability in harsh environments Available in M, L, XL, XXL
Part Number
4933433781 Medium4933433782 Large4933433783 X Large4933433784 XX Large
High Vis Heated Jacket (No Battery) • Three sewn in carbon fibre heating zones, provides comfortable and durable heating element• Powered by M12™ LITHIUM-ION technology from M12 fuel models, provides heat for up to 6 hours of run-time• Three heat settings with easy touch controller high, medium, and low settings for differing heat needs• Advanced cold weather technology, multi-layered fabric to actively warm the body and stimulate blood circulation• Water and wind resistant provides comfort and durability in harsh environments Available in L, XL, XXL
n
M12 -time
eeds
SHARES BATTERY WITH
M12 TOOLS
HD18 AG-402C Heavy Duty 115mm Angle Grinder • Milwaukee’s® high performance 4-pole motor delivers maximum power whilst optimising the power to weight ratio• REDLINK™ Overload protection electronics in tool and battery pack deliver best in class system durability• Reduced height of gear box and slim girth design deliver optimum ergonomics• Full metal gear case delivers heavy duty durability• Exclusive paddle switch design for ease of use• Multi position side handle for ease of use
No. of batteries supplied 2No load speed (rpm) 9000Disc diameter (mm) 115Spindle size M14Weight with battery pack (kg) − 2.4
Supplied in − KitboxPart No: 4933441303
M12 IR-21B (3/8”) Impact Ratchet • Best in class power and speed• 47Nm Torque and a no load speed of 250rpm• Variable speed metal paddle switch trigger - provides greater user control during application• Compact ID - ideal for tight spaces and small engine bays• Reinforced housing - provides high durability similar to steel ratchets• On board fuel gauge and LED light - added user convenience and illumination in low lit working conditions• REDLINK™ Overload protection electronics
Battery pack capacity (Ah) 1.5No. of batteries supplied 1Max. torque (Nm) 47No load speed (rpm) 0 - 250Length (mm) 274Weight with battery pack (kg) 0.9Part No: 4933431280
M18CPD 18v FUEL Combi Drill • 1 x 4.0 Ah Battery• 1 x 2.0ah Battery• Combo charger• Heavy duty tool box• 100 Piece accessory set
Part No: MBOX100CPD-421
EXTRA BATTERY FREE WITH THIS GRINDER! EXTRA BATTERY FREE WITH THIS RATCHET! EXTRA BATTERY FREE WITH THIS WRENCH!
HD18 HIWF-402C Heavy Duty Impact Wrench • The most powerful 18V cordless impact wrench on the market• With its Milwaukee® 4-pole frameless motor it delivers a staggering 610Nm of torque, ideal for powering through the toughest of applications• REDLINK™ Overload protection electronics in tool and battery pack deliver best in class system durability• Ideal for heavy applications such as steel fabrication, mechanical fastening, industrial construction and automotive work• Light weight and ergonomically designed• Fuel gauge displays remaining battery charge state
Battery pack capacity (Ah) 4.0No. of batteries supplied 2No load speed (rpm) 0 - 1900Impact rate (ipm) 0 - 2200Max. torque (Nm) 610Weight with battery pack (kg) 3.0Supplied in Kitbox
Part No: 4933441792
4931427105 M12 Battery for jacket £30.004932352000 M12 Charger for jacket £40.00
Part Number
4933433786 Large4933433787 X Large4933433788 XX Large
4931427105 M12 Battery for jacket £30.004932352000 M12 Charger for jacket £40.00
SHARES BATTERY WITH
M12 TOOLS
5
90 Litre Gravity Oil DrainerDesigned to drain, by gravity, waste oil from engines, gear boxes and differentials of all vehicles. The emptying of the drained oil inside the reservoir is air operated.Part No: JAOD3090
2-in-1 Oil DrainerDesigned to drain waste oil by either gravity or suction from engines, gearboxes and differentials of all vehicles. The emptying of the drained oil inside the reservoir is air operated. Adapters for BMW and Volkswagen are also included.Part No: JAODE090E
Roby Vac Pneumatically Operated Brake BleederFast Efficient Brake Bleeding• Handy carry handle • Simple to operate• Tough casing manufactured from Nylon 6• Recommended operating vacuum - 0.7bar• Air outlet silencer for quiet operation• Supplied with 2mtr suction hose• Tank capacity - 9.5ltrs
Tundra Air Hose • Manufactured from a super flexible premium hybrid polymer• High-Vis yellow outer cover • Offers all weather flexibility, even in freezing conditions• Working temperature range: -40°C to 65°C • Tundra hose has no memory• Excellent abrasion resistant outer cover• Working pressure up to 300 psi• Resists kinking even under pressurePart No: TRB6100
Brake CleanerThe Redashe brake cleaner is designed to clean vehicle brakes during inspection & service. The stainless steel wash bowl can be adjusted through 180 degrees & up or down to match the height of the vehicle. • Air blade dryer • Flow through brush• Lockable wheels (100mm diameter) • Solvent spraying jet
Part No: EA4760
240V Cable Reel• Compact, lightweight design• Supplied with 15m of 3 core,1.5mm cable• Fitted inlet cable for connection to supply• Integral wall mounting swivel bracket• Latching of cable at any length• Fully automatic spring rewind• Low effort, easy to use rewind tension• Virtually maintenance freePart No: C605-100
Spring Rewind Compressed Air / Water Hose Reel• Light weight and durable just 12.5kg's• Constructed in high-impact polypropylene• Fully assembled, includes 3ft connecting hose• Suitable for compressed air or water• Fully automatic hose rewind for neat and tidy storage• Fitted with 15mtr x 10mm hose, Max WP 300psi• 12 Month manufacturer’s warrantyPart No: C701-100
Coolite Rechargeable 30 LED's• 10 x More efficient than incandescent bulbs• Low self discharge• Extremely long life LED elements• Handy fold away hook• Shock, water and oil resistant• Highly polished reflector
Reels for other applications available on request
cent bulbse
6ar
ure
Part No: ZA2HBL
Heavy Duty Diesel / Oil 205ltr Barrel Pump• Suitable for 50ltr (11 gallons) - 205ltd (45 gallons) drums• Complete with a 2” bung adaptor• Pump is front actioned for easy accessability• Includes 1.8m PVC nitrile delivery hose with metal nozzle, spring & hose clamp• Recommended use: Diesel, kerosene, heating oils, motor oils, lubricating oils (upto SAE90), and other non-corrossive media• Contains a built in drum opener• Delivers upto 250ml per stroke
230V or 110V Multipurpose Electric Pump and Nozzle Kit • Suitable for use with non flammable liquids including: Diesel, kerosene, mineral & synthetic oils, heating oils, antifreeze, water & emulsions• Pump is fitted with a 2” drum adaptor for direct drum installation• Built-in anti syphoning system designed to ensure that media is not drained from container/barrel in the event of the nozzle or delivery hose being damaged• Continuous duty• POM, polypropylene, stainless steel, nitrile rubber, viton & PTFE
DO NOT USE WITH FLAMMABLE MEDIA
Part No: ZEOPAC230 / ZEOPA110
DO NOT USE WITH: Water based media, antifreeze, solvents, acids and gasoline etc.
Part No: J1500 (Yellow)Part No: J1500G (Green)Part No: J1500R (Red)
Part No: BV0004
Professional Precision Ratchet Screwdriver• Patent pending ZAD 8 zinc alloy solid-core™ ratchet • Delivers 225lb of torque • Chamfered solid steel shaft for long life and durability • Cushion grip, tapered design handle provides extra comfort and less fatigue • Built to securely hold the bit in the cartridge and the screwdriver shaft • Easy access to bits - Slide the bit cartridge all the way out from inside the handle. Part No: RD/SD/7R
Indestructible Handle Ball Pein 2lb Hammer• Indestructible handle with spring steel bars that run all the way through the handle• Head never gets dislodged • Ergonomic rubber grip handle absorbs shock and vibration, reducing fatigue • Special Bonding process ensures that head never gets loose from the handle • Forged from special steel and Induction case hardened to 52 to 56 HRC. Part No: ZBPID3214
Compact High Power LED Inspection Lamp • Rechargeable and cordless LED inspection lamp.• High power LEDs provide up 1200 Lux light output.• Includes integral hook & belt clip.• Includes magnet for hands free use.• Tough and robust polycarbonate construction.• Lithium-Ion battery.
Part No: RIL3200
Ring Essentials Pocket Lamp• Magnetic• Includes batteries• Integral swivel pocket clip
Part No: RIL51
12v, 25A SmartChargePro• 12v, 2-25A programmable 8 stage battery smart charger with multiple charge rate settings.• Multi-chemistry function to set the specific charge required for different battery types.• Power supply function maintains the battery voltage when appliances connected and drawing power.
• Includes LCD display.
Part No: RSCPR25
12/24V 3000A Metal TradeStart Power Pack• 12/24V, 3000A Professional metal cased power pack for car & commercial retailers, fleet operators and service engineers.• Jump starts up to 5.5 litre truck engines.• Heavy duty sealed lead acid batteries with up to 4 year service life.• Battery status indicators.• Reverse polarity warning buzzer and indicator.
Part No: RPPM3000
12/24V 4000A Metal TradeStart Power Pack • 12/24V, 4000A Professional metal cased power pack for car & commercial retailers, fleet operators and service engineers• Jump starts up to 7 litre truck engines.• Fitted with high capacity spiral wound AGM batteries with up to 8 year service life.• Multi-function LED display.• Reverse polarity warnings.• Integrated wheels and transport handle.
Part No: RPPM4000
COMES WITH RT5151 Cyba-lite Trio focusable 0.5w headlight worth £24.99 Free of charge!
COMES WITH RIL2600 ultra compact multi-positional LED inspection lamp worth £32.99 Free of charge!
6
Hiton Universal Diesel & Waste Oil Heaters A fantastic new range of efficient, clean, virtually soot free combustion solutions using waste oil, diesel or any combination. Hiton HP series universal oil heaters are suitable for heating buildings without central heating - such as automotive workshops and garages, industrial buildings, basements and garages. The heaters run on most oils of mineral and plant origin, such as motor oils, heating oils, gear oils, hydraulic oils and used frying oils.
IMPORTANT! A local authority licence is required to operate a waste oil burner.
PLEASE NOTE: Waste oil heaters are self installation and carry a warranty with telephone technical support.
Part No 09159 09177 09161 09178 09179
Model HP105 HP115 HP125-O HP125 HP145
Min. Heat Output 51,182 BTU/hr
(15 kW) 51,182 BTU/hr
(15 kW)72,000 BTU/hr
(21 kW) 72,000 BTU/hr
(21 kW) 102,420 BTU/hr
(30 kW)
Max. Heat Output 75,067 BTU/hr
(22 kW) 75,067 BTU/hr
(22 kW)102,420 BTU/hr
(30 kW)102,420 BTU/hr
(30 kW)143,406 BTU/hr
(42 kW)
Approx. Heating Area 420m³
(14,832 cu.ft)420m³
(14,832 cu.ft) 668m³
(24,297 cu.ft) 668m³
(24,297 cu.ft) 2660m³
(93,937 cu.ft)
Fuel Consumption (min. output)
1.25 kg/hr(1.49 ltr/hr)
1.25 kg/hr (1.49 ltr/hr)
1.8 kg/hr (2.14 ltr/hr)
1.8 kg/hr (2.14 ltr/hr)
2.55 kg/hr (3.04 ltr/hr)
Fuel Consumption (max. output)
1.85 kg/hr(2.20 ltr/hr)
1.85 kg/hr (2.20 ltr/hr)
2.9 kg/hr (3.44 ltr/hr)
2.9 kg/hr (3.44 ltr/hr)
3.57 kg/hr (4.25 ltr/hr)
Fan Assisted NO YES YES YES YES
Finish Heavy Duty Painted Heavy Duty Painted Galvanised Metal Heavy Duty Painted Heavy Duty Painted
Price with flue kit £959 £1195 £1295 £1395 £1845
Lease from (per week) £5.15 £6.41 £6.95 £7.48 £9.90
Hiton Universal Oil Heat Booster This stainless steel heat booster can increase your universal oil heater’s output by 40% by utilising heat that would ordinarily be released and lost up the flue. The booster is compatible with all of our universal oil heaters and simply slots in before the flue. Use a heat booster and increase your oil heater’s efficiency up to a massive 91%.
Part No: 09164 for models: HP105, HP115 & HP125
Part No: 09171 For model: HP145
Model No: 09159 Model No: 09161 Model No: 09178 Model No: 09179Model No: 09177
PLEASE NOTE: In order to burn waste oil you will need to register with your local authority.
Fireball 37 Ceramic Infrared Heater• 230v (13amp) Supply
• 9,600BTU (2.8kW) Heat output
• 2 Heat levels
• Tough ceramic emitters to provide radiant heat output
• Clean source of heating and drying
• Lightweight and portable
Fireball 47 Quartz Infrared Heater • 230v (13amp) Supply
• 10,200BTU (3kW) Heat output
• 2 Heat levels
• Tough quartz emitters to provide radiant heat output
• Clean source of heating and drying
• Adjustable tilting heater face
• Wheel mounted
Part No: 09193
Part No: 09195
ELECTRIC HEATERSRescue Pac 1600 • 1600amp Boost peak rate
• 700amp Cranking rate
• 12v DC Output socket
• LED Charge indicators
• True 22Ah Battery capacity
Rescue Pac 3000 12v/24v • 3000amp (12v) / 1500amp (24v) Boost peak rate
• 1200amp (12v) / 600amp (24v) Cranking rate
• 2x 12v DC Output sockets
• Voltmeter
• Reverse hook-up alarm and indication
• Tough steel case with plastic seat
• True 2x 22Ah battery capacity
Part No: 03936
Part No: 03937
BOOSTER PACKS
500kg Transmission Jack • 1175mm to 1995mm Lifting height
• Heavy-duty hydraulic cylinder
• Oversized foot pedal for easy lifting
• Knurled air release valve
• Spring loaded pressure release valve
• New and improved design
20 Ton Floor Press • 20 Ton capacity
• 185mm Ram stroke
• 0 – 910mm Work range
• Floor standing
Part No: 03871
Part No: 03822
HYDRAULICSTurbo Set 110 • 110bar Oxygen cylinder • Disposable Turbo gas cylinder • Pressure regulator and gas tap • 4x Nozzles, hoses & accessories • Up to 225 ltr/hr / up to 3050ºC
Turbo Set 200 • 110bar Oxygen cylinder • MAP Pro fuel gas cylinder • Pressure regulator and gas tap • 4x Nozzles, hoses & accessories • Up to 315 ltr/hr / up to 3100ºC
OXYTURBO (PORTABLE GAS BRAZING & WELDING) Simple to use, light and portable, no cylinder rental required
Part No. Description PRICE
TS110RGP TS110 Kit replacement gas package 3x oxygen cylinders, 1x turbo gas cylinder £87.49
TS200RGP TS200 Kit replacement gas package 3x oxygen cylinders, 1x MAP gas cylinder £85.49
TSOXY4 Oxygen gas - Pack of 4 cylinders £89.95
TSTUR4 Turbo gas - Pack of 4 cylinders £89.95
TSMAP4 MAP gas - Pack of 4 cylinders £74.95
OXYTURBO GAS PACKAGES
Part No: TS110
Part No: TS200
SCAN ME!
TO SEE THEM IN ACTION.
7
Part No: 14285090
Part No. 11692190
Carpet & Upholstery CleanerPuzzi 100 with FREE detergentKärcher’s Puzzi 100 is a powerful spray extraction machine designed for deep cleaning of carpets, upholstery and textile flooring. Cleaning vehicle interiors is quick and easy thanks to the Puzzi’s hand tool, whilst the floor tool makes this machine ideal for deep cleaning carpeted areas.
• Vacuum: 220 mbar
• Air flow rate: 54 litres/sec
• Clean / dirty tank capacity: 10/9 litres
FREE 10KG DETERGENT FOR UP TO 1200 APPLICATIONS.
Part No. 96221830
This compact and powerful hot water high-pressure cleaner is ideal for daily use in the automotive industry and features eco efficiency mode which combines high performance with excellent economy. Heating water up to 155°C, the HDS 6/12 C will shift even the most stubborn dirt and grease with ease. Features a built-in detergent tank with integrated spout for easy filling and accurate dosing system with automatic rinse function.
• Pressure: 30-120 bar
• Water flow: 240-560 litres/h
• Connected load: 3 kW
NT 27/1 C Multi-Purpose Wet & Dry Vac A powerful and compact multi-purpose vacuum cleaner designed for quick and efficient removal of dust, dirt and liquids. The NT 27/1 features integrated storage for tools and power cable allowing the machine to be neatly stored and easily transported.
• Power: 1380 W
• Vacuum: 200 mbar
• Capacity: 27 litres
LEASE FROM £8.31 PER WEEK
HDS 6/12 C Hot Water Pressure Washer With Steam Mode
FACOM TOOLBOX PRO (tools not included)
• Reinforced polypropylene bin• Metal wire hinges• Metal padlock clasps (padlock not supplied)• Safe and comfortable aluminum handle• Fastening strap in the cover to store bulky objects (saw frame, levels...)• Supplied with “slider” removable plate• High storage capacity: 47 litres
Part No. BP.P26
Part No. RL.NANO112
)
Part No: E100107B 20-100NM
Fixed 1/2” Drive Ratchet Head Useful conversion scale just above handle in Nm & Ft-lb.48 Tooth ratchet. Comfort handle, Adjustment dial. Complete with calibration certificate.Supplied with sturdy plastic case.
1/4” Standard 12pt Socket SetAlso includes 6 screwdriver bits and 5 hex bits, and extension bar, bit holder and 1/4 in drive universal joint with spring - stiffened joints. Includes 5.5, 6, 7, 8, 9, 10, 11, 12, 13 and 14mm sockets.
Part No. DESCRIPTION PRICE EACH 1532C 180mm Extension tubes £47.00
1527 96mm Aluminium blocks £23.00 1532A* Extension screw with rubber pad £40.00
Special adapters for safe lifting of 4x4's
Subject to 3 year servicing intervals to comply with H&SE regulations
NEW FROM MAJORLIFT… 2 TONNE JACKING BEAMHIGHER AND WIDER AT NO EXTRA COST2.0 Tonne for Class IV MOT - Offer Price HPJ2.0 £745.002.8 Tonne for Class VII MOT - Offer Price HPJ2.8 £995.00All Majorlift products are 100% designed and manufactured in the UK.
Features:• Top beam now standard at 1700mm wide and 260mm high at no extra cost, to suit cars with dedicated jacking points and longer suspension travel • Choice of manual or air over hydraulic operation - (air option at extra cost)• Hose burst valves, prevents accidental lowering• Pressure relief valve, prevents overloading• Roller support arms to suit all makes of lift (may be subject to extra cost)
JACKING BEAM
*Part No. 1532A is supplied as
standard.
Part No. DESCRIPTION PRICE PER PAIR 1590L 120x230x140mm (HxWxD) £61.00 1590M 70x200x100mm (HxWxD) £32.00 1590S 40x200x100mm (HxWxD) £24.00 1590 FULL SET PRICE £96.00 SAVE £21
300kg VerticalTransmission JackPart No: JT030
Quality 2 Ton Trolley Jack• Perfect for use in tyre shops and for heavy duty use
Part No: WDK20
3.2 Ton Trolley Jack• General purpose garage jack, rapid-lift, 3.2 tonne capacity
Part No: JG935
20 Ton Floor Press• Fitted with safety overload valve and pressure gauge
Part No: PCP20 Not suitablefor heavytyre bayuse.
OPTIONAL LIFTING PADS
8
1 2ADC45501Mitsubishi / Hyundai / Kia / Proton Tensioner Pin Set
These tools help adjust the tension of the timing belt afterthe belt has been fitted. All timing markings should bealigned and procedures for installation of timing belt in a reliable workshop manual should be followed.
For 94 Mitsubishi engine applications.
ADG0550112mm Oxygen Sensor Thread Chaser
12mm Oxygen sensor thread chaser used for repairing and cleaning threads on oxygen sensor ports.
18mm Version also available to complete the set.
For 5 Nissan Primera & 100NX applications.
ADG0550218mm Oxygen Sensor Thread Chaser
18mm Oxygen sensor thread chaser used for repairing and cleaning threads on oxygen sensor ports.
12mm Version also available to complete the set.
For over 1,450 applications.
Part No: BPPK010
Needing a specific tool for a particular job is becoming more and more common in modern vehicle servicing and repairs. Blue Print are identifying the tools you need and adding them to range.
Unlike ‘tool only’ catalogues, Blue Print clearly lists each tool next to thevehicle and part that it is intended to be used with, along with a description and usage instructions where necessary, thus informing you a tool is required and available BEFORE a job is started.
Blue Print Tool Cases
12
3
4
56
7
8
9
10
11
12
13
BUY THE COMPLETE SET
AND SAVE £40.70AND GET THIS
STORAGE CASEINCLUDED!
9
3 4
5
6 7 8
9 10 11
12 13
ADG05505Alternator Pulley Tool - Torx 50 1/2” D
The replacement of an overrunning alternator pulley requires a special tool to safely hold/lock the alternator shaft, enabling the pulley to be loosened. Attempting replacement without the correct tool is highly likely to result in damage to the pulley and/or the alternator itself.
For Fiat, Mitsubishi, Nissan, Opel, Renault, Smart, Suzuki, Vauxhall.
ADG05506Alternator Pulley Tool - M10 Spline 1/2” D
rnator pulley requires a special tool
ADT35501Toyota / Nissan Hub Nut Socket
54mm 1/2”D Hub nut socket with extended depth for deep recessed hub nuts. Also for adjusting the free play in wheel bearings on Toyota Land Cruiser 40-60-70-80-100 series and Nissan Patrol Y60-GQ-MQ-MK.
For 71 applications including Toyota Land Cruiser & Hi-Lux.
ADG055128mm Glow Plug Socket
Extra long 8mm glow plug socket designed to grip and extract the glow plugs applicable.
For 138 diesel applications.
ADG0551310mm Glow Plug Socket
Extra long 10mm glow plug socket designed to grip and extract the glow plugs applicable.
For 233 diesel applications.
ADG0551412mm Glow Plug Socket
Extra long 12mm glow plug socket designed to grip and extract the glow plugs applicable.
For 800 diesel applications.
ADH25501Honda Locking Pin Screw
The locking pin screw ADH25501 is required to allow correct alignment of the balancer shaft when replacing the timing and balancer shaft belts on many Honda models.
For 83 Honda engine applications.
ADM55501Mazda / Ford Timing Alignment Pin Set
The timing alignment pin set ADM55501 is required to allow correct engine timing alignment which is vital when removing/replacing the timing belt on Mazda and Ford vehicles fitted with 1.4TDCi and 1.6TDCi engines.
For 12 applications including Mazda 2 & Ford Fiesta 1.4/1.6 TDCi.
ADN15501Nissan Timing Alignment Pin
Fuel pump locking pin for Nissan YD25DDTi engine.
For 5 applications including Nissan Navara & Pathfinder.
ADT35503Toyota Oil Filter Removal Tool
Essential tool required when removing the oil filter housing. For use when replacing oil filter ADD62109.
For Toyota / Lexus / Daihatsu petrol applications.
ADT35504Toyota Oil Filter Drain Tool
ADT35502Toyota Oil Filter Removal Tool - D-4D Engines
ADG05511Glow Plug Reamer
Glow plug aperture cleaner to suit engines using M10 x 1 and M10 x 1.25 threaded glow plugs. Designed to remove carbon build up from the aperture where the heater element sits without the need to remove the cylinder head.
For 355 diesel applications.
FOR FITTING VIDEO
ADG05516Cape Chisel
This tool is used when fitting stake type nuts on jobs such as a wheel bearing replacement.
For over 1,089 applications.
We currently have 29 tools in range that we feel are an essential requirement for any repairer working on common Asian vehicles. Due to high demand we have created a new kit (BPPK010)which includes the most popular tools we currently have to offer.
These tools can all be purchased separately and are listed against the relevant parts in Blue Print LIVE!
www.blue-print.com/bpl
This tool saves time and prevents oil spillage when changing the oil filter on Toyota applications. To be used with ADT35502, when replacing ADT32118.
Common requirement on Toyota D-4D diesel applications.
Essential tool required when removing the oil filter housing. For use when replacing oil filter ADT32118.
For diesel Toyota & Lexus D-4D applications.
10
TCE4460/TCE320/TCE100 (Leverless)Pedal controlled two speed, two directional, tilting and raising column tyre changer for high throughput of all standard and wide wheeled vehicles up to 33” diameter with leverless operation at the flick of a switch. (Recommended for AUDI Q7, Land Rover, Jaguar & Bentley etc..)• 12” to 33” Clamping• Fully automatic operation• Follow-on bead depressor and auxiliary arm (TCE320)included to guide the tyre bead easily into the rim well • Four-way adjustable bead breaker• Low working height
ADVANCED PACKAGE PRO PACKAGE EXPERT PACKAGE
WBE4140Compact technology and high reliability with brilliant monitor display. Economic entry level solution for efficient wheel balancing onpassenger cars, motorcycles and light commercial vehicles.*• Matching function integrated in the software to minimize rim and tyre imbalance • Attachment of concealed weights behind the spokes• Measurement arm for recording the diameter and distance of the rim • TFT Monitor• Foot pedal brake for locking the wheel during weight attachment• Wheel hood supplied
LEASE FROM £17.68 PER WEEK
• Inclined assembly head facilitates fitting of the lower bead• Rim protection included on aluminium jaws and sliders• Release of assembly head at the push of a button• Recommended by the WdK for professional processing of run-flat tyres• Leverless fitting with the newly developed automatic assembly head (TCE100) negates the need for a tyre lever
Screen shot of balancing software
LEASE FROM £10.70 PER WEEK
LEASE FROM £20.36 PER WEEK
LEASE FROM £10.17 PER WEEK
LEASE FROM £29.95 PER WEEK
LEASE FROM £13.39 PER WEEK
PURCHASE BOTH TYRE CHANGER & WHEEL BALANCER TOGETHER
SAVE £165!
£5125.00PURCHASE BOTH TYRE CHANGER & WHEEL BALANCER TOGETHER
SAVE £145!
£5495.00PURCHASE BOTH TYRE CHANGER & WHEEL BALANCER TOGETHER
SAVE £295!
£7595.00
TCE4420/TCE300Fast & efficient tyre service, two speed, two directional, tilting column tyre changer, for use within general workshops servicing most types of vehicle with wheel diameters of up to 23”• 10” to 23” Clamping• Fully automatic operation• Includes auxiliary column assist arm and run flat helper arm assembly for easy and gentle removal and refit of RFT or ULP tyres• Recommended by the WdK for professional processing of run-flat tyres• Inclined assembly head facilitates fitting of the lower bead
ypes of vehicle with wheel
t helper refit
cessing
wer bead
• Precise and large measuring angle • 20° CCD Camera technology for simplified caster measurement • Mobile and compact • Simple and flexible user software with specs database• Many explanatory images and drawings which allow immediate, reliable correction of incorrect positions• Installation and on site training included
FWA Wheel Alignment Packages include:• Universal quick clamps • A set of mechanical turntables • Steering wheel lock • Brake tension adjuster • Standard software package with target data
* Motorcycle and LCV adaptors available at extra cost.
TCE4450/TCE300The new TCE4450 is a fully automatic tyre changer with a column that tilts and raises, designed to cater for workshops that handle wider tyres with a diameter of up to 26”.
The pedal-controlled two-speed, two-directional tyre changer is ideal for use on lower profile, wider rims usually associated with the Audi Q7, Jaguar, Land Rover, Bentley and other prestigious marques of this type.
Also featuring the Bosch exclusive sliding arm with air blocking device, the TCE4450 provides workshops with up-to-date tyre changing equipment built to the highest standard.
WBE4200The new WBE4200 semi-automatic wheel balancer offers garages and workshops a simple, high-precision and easy-to-use value alternative. The new machine provides the user with clear digital read-outs for passenger cars, light commercial vehicles and motorcycles, with a new ergonomic design allowing for better access to the inside of the wheel and an improved working position, creating more comfort for the user.
WBE4400The new WBE4400 has a measuring time of just eight seconds, making for quick turnaround in the workshop, thanks to Bosch’s EASYFIX® arm with automatic measurement of the diameter and distance of the wheel, which comes as standard on WBE4400.The ALUDATA® weight sticking system and the optional accessory of the new external arm, for a more accurate measurement of the wheel width, reduce the weight usage of the machines and have been designed for greater productivity.
PART NO. DESCRIPTION PRICE PER WEEKFWA4335 6CCD COMPUTERISED WHEEL ALIGNMENT (1690320077) £6995.00 £37.53FWA4435 8CCD COMPUTERISED WHEEL ALIGNMENT (1690320006) £7995.00 £42.90FWA4630 3D/8CCD COMPUTERISED WHEEL ALIGNMENT (1690700002) £9995.00 £53.63
FWA 4335 Simple, accurate with ultra fast run-out compensation• Uses 6 modern 20° CCD cameras• Quick operation: From Drive in to Measurement• Wireless transmission between tester and sensor-heads• Run out compensation can be carried out on the floor or in a raised position• Alignment technology based on 20° CCD cameras and integrated camber CCD measurement• Three measuring programmes: programme-guided, rapid & free measurement• Capable of measuring, toe (partial and total), relative steering angle, driving angle between axles, camber, caster, and kingpin angle• Complies with many OEM approvals
Bosch wheel alignment
LEASE FROM £27.50 PER WEEK LEASE FROM £29.48 PER WEEK LEASE FROM £40.75 PER WEEK
11
PROFESSIONAL ECU DIAGNOSISDESCRIPTION PRICE PER WEEK 5YR SAVING
KTS540 WITH 12 MONTHS SD/SIS SOFTWARE £1995.00 £10.70 £815.00
KTS540 WITH 12 MONTHS TECHNICAL SOFTWARE PACKAGE £2195.00 £11.78 £825.00
KTS570 WITH 12 MONTHS SD/SIS SOFTWARE £2195.00 £11.78 £1215.00
KTS570 WITH 12 MONTHS TECHNICAL SOFTWARE PACKAGE £2395.00 £12.85 £1225.00
KTS540 with ESI[tronic] 2.0 control unit diagnosis software. Same market leading coverage - new fast & easy to use format. “Time is money” every successful workshop knows this.
Fault diagnosis from the company that designs the systems.
• OE Knowledge• 350 Engineers for ESI[tronic] worldwide• 60,000 ESI[tronic] customers in 100 countries• Highest coverage in the independent aftermarket worldwide
KTS 540 + SD
sy to use format.nows this.
the systems.
es
INC. NEWESI 2 C12
SOFTWARE AND NO
TIMEOUT
NOWAVAILABLEWITH NONETIMEOUT
SOFTWAREC12 ONLY
DESCRIPTION PRICE PER WEEK 5YR SAVING
KTS540 WITH NONE TIMEOUT SD SOFTWARE £1595.00 £8.56 £925.00
The KTS 5xx range allows you to use Bosch diagnostics on your own windows based computeror laptop. USB or Bluetooth versions are available.
Built in 2 Channel Oscilloscope
(KTS 570 only)
The KTS 5xx tools can all be used in
conjunction with our ESI[tronic] repair
instructions to give a complete diagnostic
solution.
KTS 540
Diagnostics module with wireless
standard class 1 Bluetooth
connection with a range of 100m
as well as a single channel multimeter.
KTS 570
Same as the KTS 540 but with the addition of
built in 2 channel multimeter and powerful
2 channel oscilloscope which can be used for
analysis of individual system components.
Latest
technology
inside
Pass-thru ready
Economical diagnostic solution
Use with your existing workshop computer
Strong and lightweight
Ideal for workshop or mobile use
Bluetooth
Wireless connection,
diagnostics without connecting cables.
Fully upgradable
CAN-interface
(automatic
pin selection)
HUGE SAVINGS ON KTS540 &KTS570
INCLUDESFREE 1 DAY KTS USER COURSE
Annual ESI[tronic] subscription is required to keep KTS activated (not with one time purchase licence)
SDS Software includes: 1 Year ESI[tronic] standard software subscription containing ECU diagnostics and guided troubleshooting. Technical software includes: 1 Year ESI[tronic] technical software subscription. Includes wiring diagrams and technical service bulletins in addition to Offer 1.
The new 2 and 4 channel measurement module is ideal for all workshops looking for an economical and convenient solution for the more in depth diagnostic cases. Designed for fast, mobile use in the workshop, the handy FSA 500 provides the options required for workshop troubleshooting. The signal generator is an added function to help with component fault diagnosis;
The innovative analysis and diagnostics technology from Bosch offers workshops clear advantages;
• With FSA500 your troubleshooting will be more accurate and efficient• No more incorrect exchanging of parts based on suspicion• Finding faults in the vehicle system that have not logged in the fault memory• Ideal supplement to ECU diagnosis• Equip your workshop for the growing hybrid and electric vehicle market
Now FSA500 has an additional feature – CAS Plus.When used with the KTS 5 series diagnostics module, live data from the vehicle ECU can be displayed alongside the scope pattern.Whether testing engine control, ABS or CAN-bus, vehicle fault codes and actual values can be displayed with the scope wave pattern of the component being tested.
An example where this would be useful is when testing common rail diesel injectors,you can display quantity comparison live data through the KTS and also test the current of each injector with the FSA500 scope.
Having these two values side by side makes testing much easier and faster,with both devices being bluetooth you can test wirelessly at your computer.
FSA500 – The simple entry to advanced diagnostics
LEASE FROM £11.78 PER WEEK
The compact and sturdy Diesel Set 1 is used to test the low pressure fuel circuits in in-line pumps right through to state-of-the-art common rail systems.
Part No: 0986613100
Diesel set 1
LEASE FROM £5.77 PER WEEK
Diesel Test and Repair Equipment
The Diesel Set 2 rapidly and reliably bleeds fuel systems with radial piston injection pumps (VP44) and common rail systems.
Part No: 0986610234
Diesel set 2Diesel Set 3 is suitable for testing the latest common rail systems, for pressures up to 2,000 bar.
Part No: 0986613200
Diesel set 3
LEASE FROM £11.54 PER WEEK
Designed especially for quick and cost effective testing of common rail injectors.
Part No: 0986612950
Back flow leak tester
£300 OFF LIST PRICE!FREE INSTALLATION & ON SITE TRAINING
12
Delphi DS150
Delphi is one of the world's leading suppliers of automotive technologies for original equipment and aftermarket applications.
The Delphi DS range of diagnostic testers have unbeatable software with over 27,000 vehicle systems on over 45 vehicle manufacturers, all backed up by OE manufacturing and specialist knowledge in petrol and diesel electronics.
• Great all makes diagnostic tester • Covers European & Asian vehicles to current date • Huge application list with in-depth testing • Fault codes, live data, actuator operation & coding • Comprehensive range of servicing modes/resets • Bluetooth communication to interface • Works with any laptop or PC • No time out and no catch up on software • 3 Updates per year (only £495 pa)
OBD and EOBD serial diagnosis Service light reset, read and erase fault codes for all systems, petrol & diesel engine management, ABS, instrument panel, climate control, gearbox, immobiliser, SRS, multifunction (central body, central locking, convenience systems, chassis, infotainment, lights, navigation, seats, TPMS etc – vehicle specific) look at live data, graphing and saving of live data ECU coding / parameter adjustments / component configuration.
Component activation Intelligent system scan - complete scan of all ECU / ECMs on the vehicle platform, configurable by system. Full vehicle information tree – allowing vehicle specific check of OBD functionality without being connected to a vehicle.
Customer reporting system Software supports diagnostics on around 54,000 vehicle systems, on more than 4000 models from over 48 vehicle manufacturers, covering more than 85% of the European Vehicle Parc.
Delphi DS150 Car and LCV Software
PACKAGE DESCRIPTION PRICE PER WEEK
DS150SW DS150SW WITH CURRENT SOFTWARE (NO UPDATES) £1295 £6.95
DS150CAR DS150E MAX PACKAGE FOR PC £1645 £8.83
DS350CAR DS350 MAX Convertible PC & VCI PACKAGE £2395 £12.85
DS150TRUCK DS150E MAX PACKAGE FOR PC TRUCK £1800 £9.66
DS150CAR/TRUCK DS150E MAX PACKAGE FOR PC CAR & TRUCK £2350 £12.61
SV10546EX DS150 EXCHANGE SCHEME (IN SUBSCRIPTION ONLY) DELPHI ONLY £750 N/A
SV10546EX/TI DS150 TRADE IN SCHEME (MULTI MAKE TOOLS) £1245 £6.68
Also trade in any multi manufacturer
software based updatable scan tool for the new Delphi
DS150 with 12 months software and pay only
£1245
TRADE IN YOUR OLD D100 OR DS150 OR OTHER UPDATEABLE MULTI-MAKE SCAN TOOL FOR THE NEW DS150 VCI WITH ADDED FUNCTIONALITY.
This first of a kind all makes tool is quick and “easy to use” with fast connection to any CR injector whilst on or off the vehicle to perform electronic diagnosis. Once connected the “Buzz Tool” will perform measurements of important electrical characteristics, check insulation of the coil to the injector body, and drive the valve to make it “buzz.”
This tool is designed to complement the current hydraulic diagnostic equipment, YDT850 sealed rail kit and YDT410 false actuator kit and electronic diagnostic equipment such as the DS150E to complete the diagnosis of the CR system.
Common Rail Injector Electronic Test Kit “Buzz Tool”
Part No: YDT720
LEASE FROM £7.48 PER WEEK
This solvent cleaner kit along with the appropriate cleaning solvent 9001-908 is introduced to manage a specific issue of early stage lacquering that is being seen in many diesel injectors. The kit must be used alongside the NEW Delphi “Buzz Tool” YDT720.
Vehicle Diagnosis Early stage lacquering is identified by typical vehicle symptoms of non-starting or difficulties in starting from cold and erratic idle speeds at low engine temperature.
Common Rail Injector Solvent Cleaning Kit
Part No: YDT714
BUY YDT720, YDT714 AND 10 X 9001-908 SOLVENT FOR ONLY
£1595SAVING £240!
Part No: YDT410
Sealed Rail Kit
Part No: YDT850
LEASE FROM £8.56 PER WEEK
False Actuator Kit Most vehicles equipped with a common rail system use quick-fit connections in the low pressure circuit between the various components, fuel tank, diesel filter, common rail pump inlet / outlet and common rail return etc.
Quick-fits can be used on all diesel common rail systems (Delphi, Bosch, Continental and Denso) and all common rail components on the low pressure side of the system.
Delphi’s range of OE “Quick-fit” kits are all-makes and are designed to enable low pressure system repair and diagnosis
Quick Fit Kits
Part No: 9109-951EXTENSION KIT
With over 45% of the UK vehicles using common rail diesel injection systems, there is a great opportunity for maintenance, diagnosis and repair work. Common faults such as worn injectors, failed common rail pumps and electrical components can be easily and efficiently diagnosed with the right test equipment. Even the issue of early stage valve lacquering can now be resolved easily without removing the injector.
Over the last 50 years Delphi have played a major part in the development of diesel technology. During that time Delphi have made a series of technological breakthroughs to meet increasingly tough emissions legislation, developing EUI and common rail systems that exceed current and future standards, all of which makes them the experts when it comes to diagnostics and test equipment.
If your business is involved in the servicing of diesel vehicles and fuel injection systems then Delphi can provide you with the tools to be successful. From simple diagnostic tools targeted at garages and workshops alike, to specialist test equipment enabling the repair of complex system components, Delphi has it all.
Isolate actuator and mechanical faults on Common Rail pumps. The false actuator kit has been designed to work in conjunction with the sealed rail kit to further interrogate the pump when a reduction in the pressure being generated within the CR system has been identified.When maximum pressure cannot be generated using the sealed rail kit and the vehicle actuator, the false actuator is fitted in order to enable the pump to generate full system pressure. If the pump generates the correct pressure with the false actuator in place then the vehicle actuator is deemed to be at fault and should be replaced. If the pressure is still below the required level when tested with the false actuator, then there is a mechanical failure within the pump.
Designed to measure return fuel flow on diesel vehicles up to 6 cylinders, fitted with common rail injection systems. This kit helps you to identify worn, blocked or inoperative injectors quickly and easily. Contains measurement tubes for short term tests and measurement bottles for long term, more accurate evaluation.
Sealed Rail Diagnostic kitPinpoint failed components within a common rail system.This Delphi kit accurately traces faulty components by measuring the pressure generated by the common rail pump and checking back-leakage for each individual injector.As an on-vehicle testing device it prevents the need for complete system removal and refit, helping you savecustomers money and hassle. The kit contains adapters for testing all-makes applications, including Delphi, Bosch, Denso and Siemens, and is available for standard and heavy-duty systems.
Heavy Duty Kit available YDT700.
Delphi DS350• Latest version MINI VCI• 16 Pin EOBD cable• Convertible PC with 10” touch screen• Battery life 8.5hrs (typical use)• 320Gb Hard drive• 2Gb DDR2 Memory• Built in Bluetooth (for wireless communication)
• 1.3 Megapixel swivel webcam• 2 x USB2 Ports• Integrated 3 in 1 SMR card reader• Built in speakers• Dedicated carry case
Delphi DS150SW
Delphi DS150SWKit contents: Delphi VCI, 16 pin EOBD cable, Bluetooth dongle supplied in a dedicated carry case• Current CAR / LCV MAX PC software licence• No future software updates included• Licence key has to be requested via request form
• Offer ends March 2014• Annual software licences / updates can be added at anytime by ordering a normal software licence subscription
Part No: 9109-947
False actuator for Bosch CP4 CR pumps also
available at extra cost Part No: YDT747.
13
Smoke Pro Total-TechOften the simplest tools are the best and this machine is no exception. Air, vacuum and exhaust leaks can be difficult to find, but the Smoke Pro will find your leak in seconds and save £’s in diagnostic time.Find leaks in:Vacuum, inlet manifold, gaskets, seats, worn throttle shafts, EGR systems, EVAP systems, exhausts, catalytic converters, door seals, leaking light clusters, the list is endless.
Kit includes:• Exhaust cone adapter• Mineral oil • Instructional DVD• Cap plug set • Halogen lamp• Evap service port adapter
Part No: SMOKETT
Portable Common Rail Diesel Test KitDiesel common rail testing…made easy!• BOSCH & Delphi compatability • Identify faulty components• Carry out on vehicle testing• Measures injector back leakage• Measures pump high pressure• Tests low pressure fuel supply system• Tests vacuum fuel supply system• Tests pressure control valve• Confirmation of diagnostic fault codes• Non-invasive electrical connecting
Part No: CRDI-100
MVP Pro “Pay as you go”TPrograms vehicles keys & remotes quickly & effectively. No need to sub contract out.
The MVPPro uses electronic tokens which can be purchased via the internet.
Features:
• All makes coverage• Clears key memories• Program new keys• Reads immobilser ECI ID’s• Reads mechanical key codes programs remote controls• ECU Identification• Reads fault codes• Clears fault codes• Displays live data• Component actuation• Internet software updates• Electronic tokens downloaded from the web• Technical hotline• Technical support forum• USB PC Interface• Standard & test software• Adjustable contrast• Multiple languages supported• Pin code service online• Smartcheck security calculator
Carmanscan VCI 16 pinThe Carman Scan VCI is an interface for use with a PC or laptop. Can be used through Bluetooth or hard wired. Truly the very best Asian tester on the market, including near OE software for Korean vehicles and vastly improved diesel applications.
• Huge application list of Asian, European, American & Australian vehicles, now with Asian truck applications.• Includes 2 years software• Operates with all protocols including canbus• Menu selection & auto search system• Fault code read & clear• Live data & one hour flight record capability on Carmanscan AT• Actuator operation• Graphing functions• 2 Years warranty• Optional truck and European adapters
LEASE FROM £8.02 PER WEEK LEASE FROM £6.41 PER WEEK
Buy Asian vehicle adaption kit for £75 only at time of purchase.
Carmanscan AT 16 pinA rugged tablet style handheld diagnostic tester with an amazingly quick operating system. The full colour screen offers excellent graphics in all lights
CARMANSCAN AT CARMANSCAN VCILEASE FROM £10.70 PER WEEK
Part No: MVPPRO
14
Automatic Ignition Waste Oil Heater• SB80 & SB110 Include motor & pump kit for connection to bulk tank (pipework and electric cable not included)• Complete flue kit included in package provides for approximately 6 metres (19 feet) ground clearance• Clean combustion and high efficiency • High capacity air distribution fans• Supplied with manual dial type remote thermostat and 5 metres of cable• Optional extra is a digital thermostat & time control • Summer ventilation facility • Large capacity fuel tanks• Automatic burner with fuel pre-heating • Fast return on investment • Heater includes “day” tank• Requires connection to a compressed air supply
Flue kits now include roof seal, fitting kit & two wall brackets.
• Durable and safe housing with powder coating• Flame failure security• Manual ignition system• Oil overflow security system• Internal vaporising burner
• High/low manual heat regulation• Overheat security• 5 Models available with heat outputs from 102,000 to 210,000 Btu/hr• Model AT306 produces radiant heat only
Manual Ignition Waste Oil Fired Heaters
Part No: AT305 AT306 AT307Heat capacity Btu/hr 102,000 102,000 102,000
Air movement M3/hr 1000 1000
Tank size Litres 50 50 50
Fuel consumption Ltr/hr 3.0 3.0 3.0
Price with Flue Kit £1245 £1095 £1645
Lease from (per week) £6.68 £5.88 £8.83
Price without Flue Kit £995 £845 £1345
Lease from (per week) £7.22
AT307AT400 & AT500 AT305/AT306
Part No: SB40 SB60 SB80 SB110
Heat capacity Btu/hr 153,000 204,000 306,000 436,000
Air movement M3/hr 3200 4100 6200 8100
Tank size Litres 80 80 130 130
Fuel consumption Ltr/hr 4.6 6.0 9.0 12.8
Compressed air displacement 1 to 1.3 CFM 1.5 to 1.8 CFM 2 to 2.6 CFM 3 to 3.6 CFM
Electric supply Volts 230 230 400+N 400+N
Price £3895 £4295 £6195 £6795
Lease from (per week) £20.90 £23.04 £33.24 £36.46
Motor & pump kit for bulk tank connection Part No:98.085.399 £300.00 (Included with SB80 & SB110)Optional digital thermostat & timer Part No:98.085.890 £180.00
Motor & pump kit for connection to bulk tank with bottom outlet and a maximum distance of 15 metres (pipework & electric cable not included). Optional for models SB40 & SB60. For top outlet tanks and/or distances above 15 metres, a pneumatic pump kit is available at an extra cost.
ALL PRICES ON THIS PAGE ARE SUPPLY ONLY TO UK MAINLAND AND EXCLUDE INSTALLATION.
Part No: AT400 AT500Heat capacity Btu/hr 146,000 210,000
Air movement M3/hr 3000 3000
Tank size Litres 55 55
Fuel consumption Ltr/hr 4.3 6.2
Price with Flue Kit £2245 £2645
Lease from (per week) £12.05 £14.19
Price without Flue Kit £1945 £2295
Lease from (per week) £10.44 £12.31
AT400 and AT500 Feature a burner draw system for easier lighting and cleaning, PLUS a heat exchanger for higher efficiency.
Please note: Waste oil heaters with a perforated combustion chamber (AT305 & AT306) are not recommended for use in environments where explosive vapour may be present.AT307, 400 & 500 have sealed combustion chambers which can take in outside air for combustion or take air from 1.8m above ground level. Combustion air intake kits are available to achieve this.
The diagram below shows working principals for the various models.
A local authority licence is required to operate any waste oil heater.
Note: Defra is currently conducting a review of the guidance on the implementation of the Waste Incineration Directive (WID) and its application to Small Waste Oil Burners (SWOBs). This is ongoing, no timescale has been set.
• Complete flue kit included in package provides for approximately 6 metres (19 feet) ground clearance• Efficient, clean, virtually soot free combustion using: Used( waste ) oil, diesel, heating oil or any combination
Model No: SB40 & SB60
Model No: SB80 & SB110
Model No: AT500Model No: AT400
Model No: AT305 Model No: AT306 Model No: AT307
15
Advantages of Oil Fired Heaters:
• Low-noise radial fan
• Large air volumes guarantee quick heating
• Equipped with thermostat as standard
• Characteristics of oil fired heaters
• Capacities of 30, 42, 64 and 84 kW net, with an efficiency of 91%
• Plug-and-play principle, quick and easy to install
Proheat Cabinet Oil Fired Heaters with Built-In Fuel Tank• For use with 28 or 35 second heating oil
• Electric supply 230 volt 50Hz
• Four-sided adjustable outlet opening guarantees equal air distribution
• Combustion chamber and heat exchanger made from heat resistant steel
• Control panel fitted with switches and warning lights
• Standard equipped with summer/winter circuit for heating or ventilation
Part No Output BTU/hr Ltr/hr Approx Heated Airflow m3/hr Tank Ltr Price Per Week
PROHEAT30 104,000 3.38 1,900 55 £1895.00 £10.17
PROHEAT40 145,200 4.70 2,800 55 £2095.00 £11.24
PROHEAT60 221,600 7.20 4,500 75 £2395.00 £12.85
PROHEAT80 290,850 9.50 5,300 105 £2695.00 £14.46
Part No Description Price
FKPH40 FLUE KIT FOR PROHEAT30 & PROHEAT40 £249.00
FKPH60 FLUE KIT FOR PROHEAT60 £249.00
FKPH80 FLUE KIT FOR PROHEAT80 £289.00
Infra-Red Radiant Oil Fired Heaters• Photo cell flame control• High pressure burner• Spot heating with no airflow• Fuel gauge • Room ventilation is required• Vertical inclination on VAL MIDI• Vertical and horizontal inclination on VAL 6-1 Step
APPLICATIONS: MOTOR TRADE• Workshop personnel heating• Drying and curing in body shops
INDUSTRY• Spot heating in workshops, transit depots and warehouses• Warming up and defrosting machines
Part No: VALMIDI
LEASE FROM £6.04 PER WEEK
Part No: VAL6-1STEP 230V
LEASE FROM £7.48 PER WEEK
Part No: IFT21 Part No: EH0208
20.5Kw Infra-Red Heater• For use with paraffin, kerosene or diesel• 70,000 Btu/hr. heat output• Heats objects, not the surrounding air• 15 Litre tank, allows approximately 7 hours running time• Fuel gauge and large heavy duty fuel cap• Fitted with safety cut-out• Clean burning• 230 Volt
Radiant Halogen Electric Heater EH0208• 3kw = 10,236 Btu/hr • Heavy duty construction• Quick heat and fully portable • 2 Heat settings• Tip over safety cut out • Overheat safety cut out • 220-240 Volt • Weight 16Kg • Dimensions: H=89cm, W=55cm, D=49cm
The flue kit provides for approx. 5,5 metres height.• 4 x 1 Metre flue pipes • 1 x terminal ( rain cap )• 2 x Adjustable wall fixing brackets• 1 x High temperature silicone rubber roof seal and fixing kit• 1 x Tee- piece ( flue to heater )
No space for a bulk fuel tank ?......Then PROHEAT is your solution
Heater prices exclude flue kits - Please see below
Model Heat Ouput (BTU/hr) Heat Outout (KW) Approx. Fuel Consumption
Val Midi 112,000 33 3.1 litres/hr
Val 6 1 Step 140,000 40 3.7 litres/hr
POWERFUL, EFFICIENT AND SILENT WORKSHOP SOLUTIONS
THE WORLDS FAVOURITE RECIPROCATING AIR COMPRESSOR
FINI is among the longest established manufacturers of rotary screw compressors. Uniquely, FINI produce all major components within the compressor themselves, ensuring the most efficient and durable compressors, always ahead of the competition.
• High output - maximum energy efficiency
• The lowest noise levels - 58 dB(A) - 65 dB(A)
• Continuous duty - designed to work
• Attractive modern design with simple controls
• 2-Year on site warranty
• Working pressure up to 13 bar
• Highly qualified technical back-up
MICRO 5-7QUADRO 10-15
NB38C/200 FM3
NuAir is the worlds largest producer of reciprocating air compressors. Our latest range of workshop compressors provide world proven and reliable workshop solutions.
• Lower speed
• High quality components
• Full range—2.2kW to 7.5kW
• Tandem units for large single phase installation
• 2-Year warranty
• National back up service
Part No. Model Capacity CFM Receiver ltr Phase HP Offer Price Per weekF-V77JR72FND001 MICRO SE 508/200 8 BAR 20.5 CFM FAD 200 Three 5.5 £2395.00 £12.85
F-V77JP72FPS001 MICRO SE 510/200 10 BAR 17.1 CFM FAD 200 Three 5.5 £2395.00 £12.85
F-V77JW92FND001 MICRO 708/200 8 BAR 25.4 CFM FAD 200 Three 7.5 £2495.00 £13.39
F-V77JO92FNM301 MICRO 710/200 10 BAR 22.9 CFM FAD 200 Three 7.5 £2495.00 £13.39
F-V91NG92FPS001 QUADRO 1008/270 8 BAR 44.1 CFM FAD 270 Three 10 £3295.00 £17.68
F-V91NH92FNM001 QUADRO 1010/270 10 BAR 35.3 CFM FAD 270 Three 10 £3295.00 £17.68
F-V91NL92FPS001 QUADRO 1508/270 8 BAR 58.2 CFM FAD 270 Three 15 £3395.00 £18.22
F-V91NM92FNM001 QUADRO 1510/270 10 BAR 53.0CFM FAD 270 Three 15 £3395.00 £18.22
Part No. Model Capacity CFM Receiver ltr Phase HP Offer Price 5yr Weekly
S-FCCC404FPS502 ND2/50CM2 7.4 disp 50 Single 2 £195.00 -S-28DA504FPS032 NB2800B/50/3M TECH 12.5 disp 50 Single 3 £375.00 -S-28FN504FPS040 NB28C/100/FM3 12.5 disp 100 Single 3 £375.00 -S-36HN504FPS012 NB38C/150 FM3 13.95 disp 150 Single 3 £475.00 -S-36HN541FPS013 NB38C/150 FT3 13.95 disp 150 Three 3 £475.00 -S-36LN504FPS014 NB38C/200 FM3 13.95 disp 200 Single 3 £495.00 -S-36LN541FPS015 NB38C/200 FT3 13.95 disp 200 Three 3 £495.00 -S-N7LN701FPS044 NB7/200 FT 5.5 23.7 disp 270 Three 5.5 £695.00 -S-N7NN801FPS018 NB7/270 FT 7.5 29.7 disp 270 Three 7.5 £895.00 -S-N1NN905FPS019 NB10/270 FT 10 38.1 disp 270 Three 10 £1295.00 £6.95
S-36NW505FPS038NB38/270/TD 3M+3M TANDEM 27.8 disp 270 Single 3+3 £1395.00 £7.48
16
Part No: MEGASPIN200-2
megaspin 200-2 Wheel Balancer• 3D (Alloy) / 2D (Steel) Auto data input• Motorised operation• Space saving design• Industrial balancing assembly guarantees suitability for extreme volume applications
LEASE FROM £10.70 PER WEEK
el Balancer
Part No: MEGAMOUNT503R
megamount 503 Racing Tyre Changer• 10” to 24” Clamping• ‘Megafit 2’ robotic assist arm• Fully automatic operation• Can be upgraded to ‘lever-less’ at any time in the future
LEASE FROM £16.07 PER WEEK
Remember, Hofmann Megaplan are a manufacturer of Premium quality tyre equipment, offering unrivalled warranties, and undoubtedly the best installation and training in the industry. As suppliers to vehicle & tyre manufacturers at factory and dealer level, you will be assured of a product that is built to last!
acing
UPGRADE TO THE ‘PLUS’ VERSION
TO GET TOTAL 3D DATA INPUT AND
COLOUR TFT DISPLAY FOR JUST
£200 MORE!!!
Part No: C3.5XL
C3.5XL Two Post Lift• Solid steel column profiles• Industrial strength spindle & nut mechanism• Unique lifting pad design enables quick-change of height of lifting pad (covers ALL vehicles)• 3500kg Lifting capacity• Exceeds EU specifications and total loading capacity at low cost
Part No: C125
S255 Tyre Service Lift• Galvanised platforms• Ultra low profile design• Available in 3ph or 1ph• 3000kg Lifting capacity• Cannot be compared to lower cost alternatives
LEASE FROM £18.22 PER WEEK
LEASE FROM £18.75 PER WEEK
Part No: C2.32
C2.32 Two Post Lift• Solid steel column profiles• Industrial strength spindle & nut mechanism• Ultra low profile lifting arms• 3200kg Lifting capacity (2800kg in 1ph)• Exceeds EU specifications & directives
LEASE FROM £15.53 PER WEEK
Cascos have been manufacturing lifts in Spain since 1965, and still manufacture in the same premises using the same traditional methods to this day. The result is a product that cannot be compared to any other, and that boasts an industry leading 5 year warranty, subject to annual service by a recognised engineer.
Part No: S255
LEASE FROM £15.00 PER WEEK
C125 Single Post Lift• Solid steel column profile• Industrial strength spindle & nut mechanism• Ideal for small garages or areas unable to accomodate a 2 post• 2500kg Lifting capacity (2000kg in 1ph)• Exceeds EU specifications & directives
5YEAR
WARRANTY!
EXCLUSIVE!BUY MEGAMOUNT 503R & MEGASPIN 200-2 AS
A PACKAGE AND GET AN NG90 FULLY AUTO
NITROGEN INFLATION UNIT ABSOLUTELY
FREE!!!
megaline Ssence 3D Wheel Alignment System• 19” or 32” Monitor versions• Semi-automatic or automatic camera boom option• Includes Autodata database• Includes mechanical turnplates• Latest in alignment technology
Part No: SSENSE3D
LEASE FROM £42.90 PER WEEK
please note that the image shown is the premium model Ssence 600
Ecoline 58 Aligner & Alignment Lift Combo• Ecoline 58 & Cascos C445 wheel alignment lift• Ecoline 58 PC-based laser alignment system• Premium quality 4 post lift with 5 year warranty• Front recesses and rear slip plates• 4.8m Platforms• 4000kg Capacity• Free ‘Advance’ alignment upgrade to include 25” clamps and upgraded mechanical turnplates
Part No: ECOLINE58/C445
upgrade tograded
UPGRADE TO THE MEGALINE
SSENCE/C445 COMBOSPECIAL OFFER
LEASE FROM£80.45 PER WEEK
LEASE FROM £64.36 PER WEEK
17
The CCP700 series is an integrated gas and smoke analyser combining state of the art digital technology.
The unit is supplied with oil temperature probe, battery RPM measurement (petrol & diesel), mouse, A4 printer, flat screen monitor and keyboard. This combined unit is housed in a high quality roll-around cabinet.• Product will test UK vehicle classes III, IV, V & VII• Gas analyser is accurate to OIML Class 0• Automatic calibration on smoke head• Battery tachometer• Flat screen monitor
• Laser printer• Temperature probe • Comes with 3yr warranty
Models AvailableCCP700-C-EN560 Cabled combined gas and smoke analyserCCP700-B-EN560 Wireless combined gas and smoke analyserOptions• Tachometer using ultrasonic and vibration technology• Commercial vehicle sample probes for central and stack exhausts• Choice of wireless or cabled smokehead• Wireless temperature probe (BT model only)
Combined Emissions Analyser for Petrol and Diesel Engines
We can now supply the Crypton ATL with a specification to suit most requirements, with various
lift options for both class 4 and class 7, plus the added benefit of class 1 and 2 testing using the
optional motorcycle adapter. Both scissor and four post ramps benefit from low profile platforms
and make an ideal replacement for many older Bradbury, Tecalemit & Kismet lifts. The checker
plated platforms look newer for longer while providing added corrosion protection.
The latest 700 series platform displays both emissions and brake test results freeing valuable
space and, if you already own a recent or current model Crypton or Dieseltune analyser, the ATL
control software may be added to your existing unit affording a useful reduction in price.*
All Crypton Automated Test Lanes comprise of:
• Emissions analyser - Combined gas and smoke (If required)• Brake tester - Full specification with integrated weighing facility & optional motorcycle adapter• Lift - Four post or scissor with integrated wheel play detectors and turning plates• Headlamp beam tester• Jacking beam - Manual or air operated (at extra cost)• Brake pedal applicator and mirrors (x2)
All Crypton ATL components are available separately. For further details, and full specification, please contact AP-Tech on:
0845 602 3436.* Subject to inspection and specification. PC upgrade may be required.
A2C89302600 CLASS IV 4 POST 4T 4.5M PLATFORM ATL PACKAGE WITH CABLED ANALYSER £22795 £122.30
A2C88025600 CLASS IV SCISSOR 4T 4.6M PLATFORM ATL PACKAGE WITH CABLED ANALYSER £23895 £128.21
A2C89118100 CLASS VII 4 POST 4T 5.2M PLATFORM ATL PACKAGE, CABLED ANALYSER £24995 £134.11
A2C89435100 CLASS VII SCISSOR 5T 5.5M PLATFORM ATL PACKAGE, CABLED ANALYSER £28295 £151.81
A2C88592500 MOTORCYCLE UPGRADE KIT CLASS IV £1595.00 £8.56
A2C88000700 MOTORCYCLE UPGRADE KIT CLASS VII £1895.00 £10.17
PART NO. DESCRIPTION PRICE PRICE PW
Part No: A2C91942100STANDARD VDO CHECK
Part No: A2C91905700VDO CHECK & TPMS
screen n
A2C87852700 700 SERIES EMISSIONS ANALYSER CABLED VERSION £4499.00 £24.14
A2C88892900 700 SERIES EMISSIONS ANALYSER BLUETOOTH VERSION £5395.00 £28.95
A2C87760800 5 YR TOTAL CARE PACKAGE INCLUDING VOSA UPDATES £2950.00 £15.83
PART NO. DESCRIPTION PRICE PRICE PW
ContiSys Multi Brand Vehicle Diagnostics Key features:
• ECU Diagnostics
• Extensive live data
• Injector-classification
• Key re-programming
• ECU re-configuration
• Electric parking brakes (EPB)
• Component activations
• Service re-set including variable, CBS and Assyst Plus
• Data capture facility (snapshot-feature)
• ABS incl. Mercedes-Benz SBC• Airbags and pretensioners (SRS)• Air conditioning • EOBD• Electric parking brakes (EPB)• CR Diesel injector coding• Service resets incl. BMW CBS, Mercedes-Benz Assyst Plus and VAG CAN• Steering-angle sensors• Tyre pressure monitoring systems (TPMS) – OBD, ready for optional TPMS frequency module (included with VDO check TPMS)• Transmissions (ASG, DSG)• Battery management
VDO Check & VDO Check TPMSPowerful functions for fast service and diagnosis
Includes 3yrs warranty and 12 months updatesIncludes 3yrs warranty and 12 months updates
All ATL packages listed include combined gas & smoke unit.
d turning plates
red.
Part No: A2C89100700
LEASE FROM £12.31 PER WEEK
PIT PACKAGES AVAILABLE
ON REQUEST
18
4T Two Post Lift with Baseplate• Short column for low ceiling installations• 4x4 And van adapters supplied F.O.C.• Wide or narrow configuration• Single piece columns• Single point safety release• Drop end arms provide a lower pad height• Large 20” x 19” steel column base plates• Triple telescoping arms provide increased range for lifting point access• Electric/hydraulic cylinders• Safety locks in each column spaced every 3 inches
4.5T Two Post Baseless Lift3.6 Metres column height
• Electric/hydraulic power system• Large 19” x 17” steel column base plates• Self-lubricating dura-glide polythene bearing system• Dual hydraulic “Direct-Drive” cylinders• Safety locks in each column spaced every 3-inches• Automatic arm restraints• Heavy-duty dual 3/8” equalizer cables with oversize cable sheaths• Padded overhead safety-shut off bar• Truck and van adapters standard• 5 Year structural warranty
c/hydraulic cylinderslocks in each n spaced 3 inches
5.4T Two Post Commercial Liftwith Baseplate• Open-top eliminates overhead obstruction, ideal for new large vans• Triple-telescoping arms provide increased range for lifting point access• Truck and van adapters as standard• Self-lubricating dura-glide polythene bearing system• Safety locks in each column spaced every 3-inches
5.4 TONNE WITH BASEPLATE EXTRA
LONG 1800MM ARMS
Part No: XPR12FD-LWB
4.0 TONNE
Part No: XPR-9T
LEASE FROM £15.53 PER WEEK LEASE FROM £24.12 PER WEEKLEASE FROM £16.07 PER WEEK
Part No: XPR-10T
p
NOW WITHTRIPLE REACH ARMS BOTH
FRONT & REAR
5 YEAR STRUCTURAL
WARRANTY AND 2 YEAR FULLWARRANTY
• Safety locks in each
4455 44 TTTTOTOONNNNNE
5 YEAR STRUCTURAL
WARRANTY AND 2 YEAR FULLWARRANTY
4T Four Post Lift 4166mm Platforms• Robust & reliable• Runways accommodate wide or narrow vehicles• Fully enclosed lifting cables, safety locks and sheaths• Internal “anti-sway’ slider blocks in each column• Pneumatic push-button safety release• Longer approach ramps for low ground clearance vehicles• Multi-position safety locks in each column• Power unit can be located at the front or rear of the lift
Part No: HD-9LEASE FROM £18.22 PER WEEK
ATL OFFERS50% DISCOUNT
OFF MOTORCYCLE ADAPTER KITS
WHEN PURCHASED WITH AN ATL
LEASE FROM £88.50 PER WEEK
MOT Package includes: Four post lift with brake tester, jacking beam, headlamp beamsetter.
Class VII MOT from…
Class IV MOT from…
LEASE FROM £67.04 PER WEEK
The LDS3000 is an electro hydraulic operation, in-ground scissor lift with a lifting capacity of 3000kg, and a lifting and lowering time of 50 seconds. It has low voltage controls (24v), hydraulic volumetric synchronism, platform levelling controls and hand lowering device in case of power failure. Comes complete with 40mm rubber pads F.O.C.
Upgrade to 3.5 tonne version free of charge for a limited period.
Part No: LDS3000
3T Scissor lift
LEASE FROM £23.58 PER WEEK
• MADE IN ITALY •
ATL Package includes: Four post lift with integrated play detectors, computerised brake tester, jacking beam, headlamp beamsetter, pedal depressor and pair of workshop mirrors.
LEASE FROM £118.01 PER WEEK
Class VII ATL from…
Class IV ATL from…
LEASE FROM £106.21 PER WEEK
Image shown with longer approach ramps fitted
19
BEA350 Emissions Analyser - Processor BasedProcessor based combined emissions tester, compact and robust design, includes EOBD kit for RPM and temperature pickup.
Includes: 1 Year service and calibration package2 Year warranty
(VOSA Updates not included)
Choose an emissions analyser that is powerful, accurate and adaptable.All Bosch emissions analysers are fully compliant for use in all MOT testing categories. From the processor based BEA350, to the fully adaptable and upgradeable PC based BEA850.
BEA850 Emissions Analyser - PC BasedCombined petrol and diesel emissions test station, PC based with large 19" TFT monitor, includes EOBD kit for RPM and temperature pickup.
Includes: 1 Year service and calibration package2 Year warranty
(VOSA Updates not included)
EMISSIONS ANALYSIS
PRICE INCLUDES 1 YEAR CALIBRATION & 2YR WARRANTY
LEASE FROM £26.80 PER WEEK
PRICE INCLUDES 1 YEAR CALIBRATION & 2YR WARRANTY
LEASE FROM £22.51 PER WEEK
NEW LOW PRICES ON
BOSCH EMISSIONS ANALYSERS
3.0 Ton Mobile Mid-Rise Scissor LiftThe Sprinter Express Mobil II mid-rise lift is an efficient and mobile solution for tyre service, painting and bodywork. With one metre lifting height, the Sprinter Express Mobil II covers 90% of all activities in the workshop. The anti-skid lifting platforms are galvanised and adjustable from 1400mm to 1932mm. The mechanical synchronisation is done by torsion bars at the bottom of the lift. The high performance oil submerged power unit with push buttons guarantees short lifting and lowering times.
Part No: SPRINTER
LEASE FROM £13.39 PER WEEK
3T Two Post Electro Hydraulic Lift• Crossed cylinder master/slave system replaces mechanical synchronization.• Hydraulic pipes are placed over a top connection strut.• Completely pre-assembled and tested in the factory to enable simple and fast installation.• Powerful oil-submerged motor provides fast lifting and lowering times, with one third reduction in power consumption
Part No: LMH3003
LEASE FROM £17.68 PER WEEK
3T Two Post Baseless LiftWith overhead gantry 3PH
• German quality mechanical baseless lift• 5 Year nut warranty• Two widths available• Three phase only• CE & TUV Approved - VW, BMW & Mercedes version available• Telescopic arms with low lifting point, swivelling 180 degrees
Part No: LMS3000
LEASE FROM £15.53 PER WEEK
es.
Class IV ATL Scissor Lift with Rear Slip PlatesClass IV 4 tonne scissor lift with 4580mm platforms, lifting height 1790mm, runway width 635mm, total width 2150mm. For recessed or surface installation with recessed platforms for flush fit ball race turning plates, hydraulic shaker plates & VOSA approved wheel play detectors, safety devices for overload & air locking.
Also available for Class VII as 5 tonne with 5460 mm platforms, lifting height 1990mm, for recessed or surface installation.
Suitable for wheel alignment, available as an upgrade to a new ATL installation or individually, further details available on request.
3 Phase electrics required.
MADE IN GERMANY
20 seconds
LIFTS IN JUST 20
SECONDS
20
4.0 Tonne 4 Post Wheel Alignment Liftwith In-Built 3.5 tonne Scissor Lift• Auxiliary lift built into the platforms for wheel free operation• Pneumatic locks with front recesses and rear slip plates for 4-wheel alignment operation• Photo sensor electrical synchronization• Emergency ascent and descent systems• Fool-proof safety control panel• Two-step descent system gives full foot protection• Slack cable, cable breakage and spring loaded eccentric brake system
Part No: H4403WAWS
Part No: M2903CD
Bradbury 2 Post Lift • 3.0 Tonne electro-mechanical lift• Chain driven• 2 Sets of lift pads, 60mm & 100mm supplied F.O.C. • Tool tray available at extra cost
Lighting kits £250 when bought with a
2 post lift saving £150!
Four Wheel Aligner, Trolley Mounted or Wall Mounted• Four Wheel aligner designed to allow busy tyre shops or service workshops to quickly measure and adjust most common steering angles
• Demonstration available, please call for more details
In Ground Scissor Lift• 3.6 Tonne• Hydraulically synchronised platforms• 3 Phase supply single phase available at extra cost • Includes installation• Single phase available• Lifting height 1830mm
Part No: H8603E
Low Profile Scissor• Hydraulically synchronised platforms• Easy to handle drive on drive off ramps• Overload safety valve• Safety valve in case of sudden pressure loss• Single phase available• Lifting height 1900mm
LEASE FROM £18.51 PER WEEK Part No: H8903E
Scissor Lift Mid Rise• 3.2 Tonne• Low profile on-ground installation• Mobile version available
Part No: H8101ELEASE FROM £11.24 PER WEEK
Mobile Scissor• 3.0 Tonne• Low profile (105mm) on-ground installation• Low voltage control• Synchronism for platforms without any torsion bar• Improves utilisation of workshop space• Full access to sides, front and rear of vehicle• Includes platform extensions (both sides)• Ideal for service bays, tyre shops and general repair• Lifting height 960mm
Part No: H8101ME3.2T Non mobile version available H8101E
LEASE FROM £12.31 PER WEEK
LEASE FROM £18.51 PER WEEK
LEASE FROM £41.82 PER WEEK
As part of the package price Bradburyare including FREE OF CHARGE:• Free Delivery• Free Install• Free load test• Free 12months warranty on parts and labour• Free 60mm high lift pads (normal cost £250)• Free 100mm high lift pads (normal cost £250)• Free 5 Year nut warranty• Access to the largest garage equipment service organisation in the UK with over 100 engineers
WC5401TMTrolley Mounted
WC5401Wall Mounted
LEASE FROM £13.92 PER WEEK
LEASE FROM £12.74 PER WEEK LEASE FROM £10.99 PER WEEK
Lighting kits £500 when bought with a 4 post lift saving
£250!
Bradbury EPCO 2 Post Lift with Base Frame• 4.0 Tonne capacity
• Hydraulic operation
• Electro mechanical locking
• Automatic arm locking
• Door protection rubber
• Available in single phase & with adapter pads at extra cost
• Ideal for workshops with height restrictions
EPCO LIFTS OFFER PRICE 5 YEARS LEASE PW H2403B 4.0T 3PH £2895 £15.53 H2401B 4.0T 1PH £2995 £16.07
EPCO LIFTS DESCRIPTION PRICE
EPCOAH100 HIGH LIFT PAD SET 100MM £259.00 EPCOAH180 HIGH LIFT PAD SET 180MM £279.00 EPCOAH200 HIGH LIFT PAD SET 200MM £329.00
H2403G & H2403HG available in single phase. Please call for details.
EPCO LIFTS DESCRIPTION PRICE
EPCOAH100 HIGH LIFT PAD SET 100MM £259.00 EPCOAH180 HIGH LIFT PAD SET 180MM £279.00 EPCOAH200 HIGH LIFT PAD SET 200MM £329.00
Bradbury EPCO 2 Post Lift• 4T & 6T Capacity • Electro-mechanical locking• Automatic arm locking • Top limit protection bar• Top limit safety device • Door protection rubber• Options: Single phase, adapter pads at extra cost• HG Model offers 400mm extra height• HG Model also has four longer arms
EPCO LIFTS OFFER PRICE 5 YEARS LEASE PW H2403G 4.0T £2895 £15.53 H2403HG 4.0T £3295 £17.68 H2603G 6.0T £4595 £24.65 H2603HG 6.0T £4995 £26.80
21
LiteCheck 2LBradbury headlight aligners were specially designed to meet the latest VOSA specification and therefore can be used in automated test lane (ATL) applications. Laser operated. Includes installation
Brake tester installation frames, lift recess frames all classes available
NEW Class 4, 5 & 7 ATL PIT’s from supply only to full delivery, civil work & installation
AUTOMATED TEST LANE & MOT BAYS
Part No: LITECHECK2INST
Class 4 & 7 ATL Bay - Heaviest Lift on the MarketATL lanes include• 4 Post lift • Recessed turn plates• Air or hydraulic operated axle play detectors• PC Brake tester with fully automated procedure• Vehicle weighing • Mirrors• Jacking beam • Pedal depressor• Laser aligned headlamp tester
FOC Site visits from fully trained area managers to qualify what is required to upgrade or advise for new proposed sites. Ask for further details.
Bradbury looks to the future with test equipment for the modern day workshop, fully approved by VOSA.
Description Prices from 5 Yr lease
Class IV Standard MOT £14,695 £78.84 pwClass IV ATL MOT £21,495 £115.33 pwClass VII Standard MOT £18,795 £100.84 pwClass VII ATL MOT £25,995 £139.47 pw
ATL BAYSNOW WITH
36 MONTHWARRANTY
Also availableexcludinginstallation
£895
LEASE FROM £5.66 PER WEEK
Includes:• Set of radius plates • Pneumatic play detector• 1040ATL/1070ATL Brake tester• Laser headlamp aligner• 2.0T or 2.8T Jacking beam• Pedal depressor • 2 x Mirrors
Available for class IV and VII ATL Packages
Class 4 & 7 ATL Pit Package Class 4 & 7 ATL Scissor Package Class 4 & 7 ATL Hybrid Package
Includes:• H7453ATL / H7553ATL / H7603ATL• 1040ATL or 1070ATL Brake tester• Laser headlamp aligner• 2.0 or 2.8T Jacking beam• Pedal depressor• 2 x Mirrors• Additional extras, lifting tables and slip plates
Available for class IV and VII ATL Packages
Includes:• H88453ATL / H88503ATL• 1040ATL or 1070ATL Brake tester• Laser headlamp aligner• 2.0 or 2.8T Jacking beam• Pedal depressor• 2 x Mirrors• Additional extras, Lifting table and slip plates
Available for class IV and VII ATL packages
LEASE FROM £97.62 PER WEEK
LEASE FROM £88.50 PER WEEK
CLASS IV OFFER
CLASS VII OFFER
LEASE FROM £155.57 PER WEEK
LEASE FROM £134.11 PER WEEK
CLASS IV OFFER
CLASS VII OFFERLEASE FROM £174.35 PER WEEK
LEASE FROM £146.45 PER WEEK
CLASS IV OFFER
CLASS VII OFFER
Enables simple and clear recess fabrication. Class IV & VII available
1040FR-C4 BT Frame - £ POA 1070FR-C7 BT Frame - £ POA
Authorised Testing Facilities (ATF)• Commercial ATF approved brake tester• VOSA Approved commercial play detectors• Pre-fabricated pits made to VOSA specifications• Heavy duty jacking beam• All classes approved headlamp aligner• Gas & smoke analyser• Load simulation available• Civil work, electrical, painting, oil & air service, lighting, full installation & aftercare services• Site survey & project managed from start to completion
22
Trolley mounted version available
Part No: GTR400W
LEASE FROM £10.70 PER WEEK
Electronic Wheel Balancer• Suitable for the balancing of all types of car and car derived van wheels from 10-24" • Simple control panel for ease of use • Digital LED display • Complete range of balancing programs
Part No: TBM/TIRO/2500
Automatic Tyre Changer• Pneumatic high pressure bead breaker and locking system for operating arm• 2 Direction turntable• Pneumatically controlled tilting column for improved accessibility• Extended clamping jaws for improved operation• Supplied complete with roller and helper arm
Part No: TTC/TIRO/1
LEASE FROM £10.17 PER WEEK
LEASE FROM £5.50 PER WEEK
LEASE FROM £9.09 PER WEEK
LEASE FROM £16.07 PER WEEK
erer
n
PACKAGE DEAL 1BUY BOTH TTC/TIRO &
TBM/TIRO/2500 TOGETHER FOR ONLY £14.46 per week
£2695 SAVE £225
K
PACKAGE DEAL 2PROFESSIONAL RANGEBUY BOTH TTC200/TH & TBM200 TOGETHER FOR ONLY £21.97 per week
£4095SAVE £595
Automatic Tyre Changer• Extra height column to accommodate wheels up to 16” wide• Re-designed chassis allows increased overall wheel diameter of 46”• Increased internal rim clamping of up to 23”• Re-designed double acting bead breaker blade for working on wider / larger wheels• Improved roller design for run flat tyres• Technohelp arm fitted to make tyre changing even easier and minimise risk of damage to tyres
Part No: TTC200/TH
Automatic Wheel Balancer• Automatic wheel balancer with data entry
• Split weight system • Double LED display
• Wheel width measurement gauge
• Self diagnosis and user calibration for simple maintenance
• 5 ALU Programs plus static and standard programs
• Foot brake for locking the wheel
Part No: TBM200
2 Post Mechanical Lift• Suitable for lifting most passenger cars
and car derived vans
• Automatic arm locking
• 5 Year warranty on self-lubricating Nylatron operating and safety nuts
• Low minimum lifting pad height of just 90mm
• Foot/toe protection device fitted to lifting arms
Part No: SF9207/3
LEASE FROM £16.07 PER WEEK
Part No: SF 9010/32
LEASE FROM £14.46 PER WEEK
FREE150MM LIFT PADS
(OA60293) LIST PRICE
£148
Sentinel 3.6t Hydraulic Lift 3Ph with Baseframe The SF9236 has been developed for general servicing work in garages covering a broad range of vehicles, including passenger cars and shorter wheelbase light goods vehicles.
The heavy duty baseframe ensures a stable lifting platform and the very low minimum lifting pad height ensures that even vehicles with low ground clearance can be accommodated on the lift. The new 3 stage lifting arm design makes loading the lift easier, particularly for wider vehicles. Single phase option available at extra cost.
Includes high lift pad set and 1 year warranty.
LEASE FROM £18.22 PER WEEK
Part No: SF9236
Camber Caster Gauge For GTR400Digital camber caster and KPI gauge GTR400/CTD
LEASE FROM £11.24 PER WEEK
Part No: GTR400T
Wheel Alignment
4.0T 2 Post Hydraulic Lift with Baseframe• Low lifting pad height 100mm• Rapid lifting time of 60 secs• Asymmetric lifting arms for longer wheelbase vehicles• Electrically operated mechanical latching system• Single phase option available at extra cost• 3 Stage arms
Wheel Aligner with Print Facility• 4 Wheel laser alignment system with integral camber caster gauge, digital turning measurement - includes wireless PC interface, windows compatible software & wall storage rack• Print out of results shows before and after alignment readings, customer and workshop can have a record for future reference of work carried out• Low clearance measuring heads to clear front spoilers• Includes pedal applicator & steering wheel clamp• Includes graduated stainless steel turning plates
Part No: GTR410W
LEASE FROM £17.68 PER WEEK
• 4 Wheel laser alignment • Low ground clearance avoids fouling of front spoilers• Wall mounted or trolley mounted• Rapid operation with ‘hang on’ heads• Wheels from 12-23”
Part No: SF 8907
LEASE FROM £12.31 PER WEEK
LEASE FROM £7.48 PER WEEK
LA738/COMP
Lube Station• Drum stand with hose reel frame• Bunded 2 barrel stand• Comes complete with reels, pumps, inlet hose, hose end meters and holders
Part No: LA738/COMP
Part No: GTR400/CTD
Part No: 671085000
Part No: 6010960000
*STRICTLY WHILE STOCKS LAST! TO BE DELIVERED & INSTALLED BY 31ST MARCH 2014.
23
Combined Smoke Meter & 4 Gas Analyser• VOSA Approved for all classes of MOT testing • 1 Year manufacturers warranty• Mobile cabinet• 1 Single annual calibration for both smoke and 4 gas• Integral DiSpeed 492 engine RPM measurement • PC Operating platform• A4 Printer• Large 19” flat screen monitor• Options include diagnostic modules
Part No: TGD/MDS/1
Headlamp Beam Tester• VOSA Approved for all classes of MOT testing• The ability to check clear lens and gas discharge projection systems• Suitable for testing supplementary beams & fog lamps• Easy to read display screen• Simple alignment and set up• RS232 Connectivity option available• Complies with latest 2005 specification• Wheeled option available for general workshop use
All ATL Test Lanes Include: 2 Year warranty, ATL lift with hydraulic shaker play detectors and radius turning plates, jacking beam, roller brake tester, mirrors, brake pedal applicator and beam tester.Tecalemit ATL test lanes now also available in packages to include; Emissions tester with 2 year warranty, two year service which includes 1st calibration followed by 6, 12 & 18 month service visits on all equipment (POA).
Class I & II (Motorcycle) MOT• Electronic roller brake tester• Large LED display and easy to read analogue & digital scales• Suitable for testing all motorcycles and motorcycle/sidecar combinations, automatic weighing & automatic calculation of brake force• Alignment bar & cords• Headlamp beam tester, rail mounted
Part No: MOT 3000
FREEANCILLARY PACK, TOW BAR SOCKET
TESTER & DECELEROMETER WITH EVERY ATL
LEASE FROM £26.80 PER WEEK
1 YEAR SERVICE & CALIBRATION PACKAGE
PART NO. DESCRIPTION PRICE PER WEEK
MOT/IV/POST CLASS IV STANDARD MOT PACKAGE £12,795.00 £68.65
MOT/VII/POST CLASS VII STANDARD MOT PACKAGE £17,195.00 £92.26
MOT/VII/POST5 CLASS VII STANDARD MOT PACKAGE WITH 5.0T LIFT £17,695.00 £94.94
LEASE FROM £36.46 PER WEEK
FREE2 YEAR
WARRANTY ON ALL ATL PACKAGES
Quadra Service Lift • Suitable for cars and car derived vans• General purpose service lift• Low access height• Mechanical and hydraulic safety systems• Audible warning on descent
PART NO. DESCRIPTION PRICE PER WEEK
OPTL/CLASSIV/POST CLASS IV OPTL LIFT, JACKING BEAM, MIRRORS & PEDAL DEPRESSOR £10,295.00 £52.24
ATL/CLASSIV/POST CLASS IV ATL 4 POST WITH SF9254 4T LIFT £21,195.00 £113.72
ATL/CLASSIV/POST/EM+ CLASS IV ATL 4 POST WITH SF9254 4T LIFT & EMISSIONS TESTER £24,995.00 £134.11
PART NO. DESCRIPTION PRICE PER WEEK
OPTL/CLASSVII/POST5 CLASS VII OPTL LIFT SF9257, JACKING BEAM, MIRRORS & PEDAL DEPRESSOR £11,395.00 £61.14
ATL/CLASSVII/POST5 CLASS VII ATL 4 POST WITH SF9257 5T LIFT 5.7M £24,695.00 £132.50
ATL/CLASSVII/POST/EM+ CLASS VII ATL 4 POST WITH SF9257 5T LIFT & EMISSIONS TESTER £28,595.00 £153.42
Tecalemit MOT Ancillary pack includes• MOT Notice board• LED Hand lamp• Tyre tread depth gauge• Windscreen damage template• Shadow panel board• Rubber wheel chocks• Wheel chock sticker• Gas leak spray for LPG vehicles• MOT Sign pack• Yellow wax marker
Part No: 0A60415
PART NO. DESCRIPTION PRICE PER WEEK
SF9436 FOUR POST LIFT 3 PHASE 3.5T 4300MM PLATFORM LENGTH £4,495.00 £24.12
SF9084 FOUR POST LIFT 3 PHASE 4.0T 5000MM PLATFORM LENGTH £4,895.00 £26.26
SF9250 FOUR POST LIFT 3 PHASE 5.0T 5200MM PLATFORM LENGTH £6,795.00 £36.46
SF8976 FOUR POST LIFT 3 PHASE 6.0T 6000MM PLATFORM LENGTH £8,195.00 £43.97
PART NO DESCRIPTION PRICE
DE7288/2005 OPTICAL HEADLAMP BEAM TESTER - NO INSTALLATION £645
DE7288/2005/INST OPTICAL HEADLAMP BEAM TESTER INCLUDING INSTALLATION £825
DE7588 LASER HEADLAMP BEAM TESTER WITH RS232 PC CONNECTION & SOFTWARE - NO INSTALLATION £895
DE7588/INST LASER HEADLAMP BEAM TESTER WITH RS232 PC CONNECTION INCLUDING INSTALLATION £1075IMAGE SHOWN DE7588
TECALEMIT EMISSIONS ANALYSERS, ONLY ONE CALIBRATION PER YEAR ON BOTH PETROL & DIESEL
WHEN THEY'RE GONE, THEY'RE GONE!
Lease example: Tecalemit SF9010/32 3.2 tonne lift, offer price £2695.00 + vat, 5 year lease plan – No deposit terms £62.66 + vat per month, weekly equivalent £14.46 + vat per week, subject to status, rental payable by monthly direct debit. Setup and document fees apply, please ask for details. Leasing examples quoted are approximate and for illustration purposes only and subject to confirmation. All offers subject to availability and applicable to UK mainland only. All prices exclude VAT. Offers available until 31st March 2014 unless otherwise stated. E & OE. Prices and specifications subject to change without notice.
CLEARANCE SALE!
1/2” Impact Wrench SetGeneral purpose impact wrench offers excellent value for money for those on a budget. Kit includes a variety of accessories in a plastic case.
• 1/2” Impact Wrench• 10 x Impact sockets: 9, 10, 11, 13, 14, 17, 19, 22, 24 and 27mm • 1 x 5” Extension bar • 1 x Hex key wrench • 1 x Nipple • 1 x Mini oiler • Maximum torque 352 Nm
Part Number: APL001K
Usual trade price£45.00
Usual trade price£36.82
Fuel Filter Removal Tool Makes replacement of the fuel filter element on vehicles fitted with the JTD type engine a much quicker and easier job and, most importantly, greatly reduces the risk of damage to the intricate and expensive plastic filter housing or fastening ring.
Suitable for certain Vauxhall, Suzuki, Saab, Fiat, Chevrolet and Peugeot/Citroen Diesel models.
Part Number: ADK85502
Pro Plus Magnetic pick-up tool with LED (PL-003P) 3 LED magnetic flexible light • Flex shaft
• Telescopic, extends from 17cm to 55cm
• LED Light diameter 22mm
• Magnetic pickup tool, both front and back side
• Batteries (4x CR44) included
Part Number: PL-003P
Usual trade price£11.47
BT501DHC (GYS 055209) Battery tester with load & starting circuit testing of 12v/24v vehicles General purpose impact wrench offers excellent value for money for those on a budget. Kit includes a variety of accessories in a plastic case.
• For 6v and 12v batteries (7Ah up to 230Ah)
• 7 Language print-out of battery condition
• Replacement recommendation on print out
• Also allows you to test the load and starting
circuit on 12v and 24v vehicles.
Part Number: 055209
Usual trade price£274.00
Usual trade price£39.96
Sealey LED026 Cordless 12 SMD LED Rechargeable Inspection Lamp Lithium-ion• Soft touch composite casing with comfortable ergonomic hand grip
• Features 12 super bright SMD LEDs producing up to 400 lumens output
• 2 Selectable modes of brightness
• Fitted with 360° swivel hook and rear magnet for hands free applications
• Charge indicator flashes green and red when fully charged
• Supplied with mains charger, in-car charger and stand for free-standing use
Part Number: LED026
Omega 1/2” Power Breaker Bar 24” Flexible Ratchet Drive • Flexible power bar with ratchet action.
• 1/2” Drive reversible flexi high torque ratchet handle 24” (600mm)
• Recommended max torque 512nm/378lb-ft
Part Number: M1224
Usual trade price£33.57
U
M