Weinman...Weinman - Split Case DATE Page(s) Change / Correction 12/01/16 All Price Increase 12/16/16...

All Terms & Conditions are subject to Crane Pumps & Systems Terms & Conditions.

Please visit www.cranepumps.com for comprehensive details of our Terms & Conditions.

IMPORTANT NOTE: Please consult the catalog for important warnings, specifications

and other vital information for the product(s) in which you are interested.

Prices Subject to Change Without Notice.

All prices in U.S. Dollars, F.O.B. Piqua, Ohio.

WeinmanSplit-Case Series

1200 - 1100 - 1310 - 1210 NSF 61/372

January 1, 2020

CONFIDENTIAL PRICE LIST

1/1/20Split Case

Page 1

Weinman - Split Case

DATE Page(s) Change / Correction

12/01/16 All Price Increase

12/16/16 4 Correction of description on case wear ring

01/18/17 11, 15 Corrected mechanical seal pressure values

03/30/17 Materials of Construction pages Corrected the flange descriptions

09/29/17 20-27 NSF 61 / 372 Weinman price pages added

11/02/17 2 Added note to Weinman NSF61/372 page

11/03/17 23, 24 Changed heading to read Rotating Assemblies

11/09/17 25, 26 Price corrections on these two pages to match pg 9 & 10

11/17/17 5-8 Non-NSF changes

12/22/17 5-8 and 21-24 NSF changes

05/07/18 Vertical series 1100 Bases Corrected motor frame sizes


08/29/18 8 & 12 Adjusted the Kynar separator price


05/16/19 6 & 8 Adjusted Bronze Sleeve Pricing


1/1/20Split Case

Page 2

Weinman - Split-Case Pumps

CONFIDENTIALAll prices in U.S. dollars, F.O.B. Piqua, Ohio.

Prices subject to change without notice.

SECTION PAGE

1200 Weinman Single Stage Horizontal Split Case Pumps

Materials of Construction 4

Non-NSF Pump Prices 5 - 6

Non-NSF Rotating Assembly Prices 7 - 8

Base Assembly Prices 9

Drip Pan Adder Prices 10

Mechanical Seal Adder Prices 11

1100 Weinman Single Stage Vertical Split Case Pumps


Vertically Mounted Pump Prices 13

Vertical Style Base Assembly Prices 14


For NSF61/372 Weinman Single Stage LVM Series Vertical Split Case Pumps,

consult factory for pricing

1310 Weinman 2-Stage Horizontal Split Case Pumps


2 Stage Pump and Pump/Base Prices 17

Rotating Assembly Prices 18


1210 Weinman Single Stage Horizontal Split Case Pumps with NSF372/61 Certification**

NSF 61 / 372 Materials of Construction 20

NSF 61 / 372 Pump Prices 21-22

NSF 61 / 372 Rotating Assembly Prices 23-24

Base Assembly Prices 25

Drip Pan Adder Prices 26

NSF 61 / 372 Mechanical Seal Adder Prices 27

** Price of NSF certified Weinman split case only; NOT Deming pumps

DESCRIPTION

1/1/20Split Case

Page 3

Weinman 1200 L SeriesHorizontal Single Stage Split Case



Standard Materials of Construction

Casing Cast iron

Impeller ASB - Aluminum-Silicon-Brass

Case wear ring Bronze

Shaft 416SS on sleeveless design, 4140 Steel on L7 & L8

Shaft Sleeve Bronze (Standard on L7 & L8) Optional on L1 ~ L6

Mechanical seal Single Type 1, Buna/Carbon/Ceramic

Seal Gland Cast iron

Maximum Working Pressures

Models

Flanges 150 Lb FF 300 Lb FF

Case material Cast Iron Ductile Iron

Max Temp 100°F 250°F 100°F 250°F 100°F 100°F

Max Working Pressure 175 psig 150 psig 450 psig 400 psig 150 psig ** 250 psig

150 Lb ASA Flanges have same drilling as 150 Lb FF steel flanges


Working pressures are non-shock service

** Cast iron 6L7 and 8L8 have 250 lb. Flat Face Discharge Flange and Casing designed for 215 PSIG

maximum working pressure.

L7 & L8

150 Lb Flat Face 300 Lb Flat Face

Cast Iron Ductile Iron

L1 ~ L6

www.cranepumps.com

1/1/20Split Case

Page 4

Weinman 1200 L Series

Horizontal Single Stage Split Case

CONFIDENTIALAll prices in U.S. dollars, F.O.B. Piqua, Ohio.Prices subject to change without notice.

Single Stage, Bronze Fitted with a 416SS shaft (sleeveless design) - LH rotation is available at no extra cost

Standard seals are Buna/Carbon/Ceramic (Y2)

Please specify pump rotation and impeller trim when placing an order

List Adders

Impeller RingsSleeved Shaft Sleeves 300# Flange

Model SizeCurve

NumberRPM

List price

of

standard

pump

Bronze

Impeller Wear

Rings (qty 2)

Steel

shaft

(sleeved

design) §

416SS

shaft

(sleeved

design)

Bronze

sleeve

(qty 2) ***

416SS

sleeve

(qty 2)

Ductile Iron

flanges -

requires use

of a

balanced

seal

2L4A 2X3X10A2L4-182

2L4-362

1750

3500270 $4,230 $264 $971 $2,104 $513 $636 $624

2L4B** 2X3X10B2L4-182

2L4-362

1750

3500270 $4,230 $264 $971 $2,104 $513 $636 $624

2L5 2X3X142L5-122

2L5-183

1150

1750310 $5,659 $264 $971 $2,104 $513 $636 $1,696

2L6 2X3X12 2L6-182 1750 290 $4,324 $264 $971 $2,104 $513 $636 $1,137

3L4 3X4X103L4-181

3L4-361

1750

3500380 $4,800 $289 $971 $2,215 $610 $636 $1,040

3L5 3X4X143L5-121

3L5-182

1150

1750450 $5,621 $289 $971 $2,215 $610 $636 $2,154

3L6 3X4X12 3L6-182 1750 390 $4,792 $289 $971 $2,215 $513 $636 $1,875

4L1A 4X5X14A4L1-122

4L1-184

1150

1750530 $6,429 $446 $971 $2,294 $610 $638 $2,205

4L1B 4X5X14B 4L1-182 1750 530 $6,429 $446 $971 $2,294 $610 $638 $2,205

4L1C** 4X5X14C 4L1-182 1750 530 $6,429 $446 $971 $2,294 $610 $638 $2,205

4L2 4X5X11 4L2-182 1750 375 $5,428 $446 $971 $2,294 $513 $638 $1,910

4L3 4X5X8 4L3-182 1750 330 $5,247 $446 $971 $2,294 $513 $638 $2,010

4L4 4X6X104L4-181

4L4-361

1750

3500485 $5,843 $499 $971 $2,294 $727 $638 $2,082

5L1 5X6X155L1-121

5L1-181

1150

1750710 $7,587 $499 $971 $2,579 $727 $638 $2,248

5L2 5X6X12 5L2-184 1750 520 $6,305 $499 $971 $2,579 $610 $638 $1,975

5L3 5X6X9 5L3-182 1750 420 $5,114 $499 $971 $2,579 $513 $638 $2,151

6L1 6X8X16A6L1-122

6L1-182

1150

17501020 $8,733 $554 $1,040 $2,641 $804 $1,060 $2,522

6L2 6X8X126L2-121

6L2-182

1150

1750615 $7,573 $554 $1,040 $2,641 $727 $1,060 $2,273

6L3 6X8X96L3-121

6L3-182

1150

1750520 $6,016 $554 $1,040 $2,641 $610 $1,060 $2,580

6L7* 6x8x20 PC3644 1750 840 $12,350 $554 std $2,641 std $1,060 $2,999

* Shaft sleeve design, all others are standard sleeveless

** Models numbers are for replacement pump reference - do not use this reference for new pumps

*** Bronze sleeves standard with balanced seal options

Type 1B: Balanced Seals (Includes Sleeves) - Required with the use of a ductile iron case

RTF = Refer to factory | STD = standard | N/A = not available

For Oil Lube Bearings, Refer to Factory.

§ Steel shaft always requires bronze or 416SS sleeves and not available in balanced designs. Sleeves have to be chosen separately from

above table.

www.cranepumps.com

1/1/20Split Case

Page 5


Horizontal Single Stage Split Case



Standard seals are Buna/Carbon/Ceramic (Y2)

Please specify pump rotation and impeller trim when placing an order

List Adders

Impeller

RingsSleeved Shaft Sleeves 300# Flange

Model SizeCurve

NumberRPM Weight

List price

of

standard

pump

Bronze

Impeller

Wear Rings

(qty 2)

Steel

shaft

(sleeved

design) §

416SS

shaft

(sleeved

design)

Bronze

sleeve

(qty 2) ***

416SS

sleeve

(qty 2)

Ductile Iron

flanges -

requires

use of a

balanced

seal

8L1 8X10X16

8L1-121

8L1-151

8L1-181

1150

1450

1750

1550 $13,254 std $1,216 $2,731 $804 $1,637 $3,783

8L2A 8X10X128L2-121

8L2-181

1150

1750 1030$10,235 std $1,216 $2,731 $804 $1,637 $3,257

8L2B 8X10X13

8L2-122

8L2-152

8L2-182

1150

1450

1750

1030 $10,235 std $1,216 $2,731 $804 $1,637 $3,257

8L3 8X10X108L3-122

8L3-182

1150

1750 875$10,272 std $1,216 $2,731 $727 $1,637 $2,469

8L7* 8X10X17 PC3658 1750 965 $12,640 std std $2,731 std $1,637 $2,972

8L8* 8X10X20 PC3661 1750 1100 $15,310 std std $2,731 std $1,637 $4,328

10L2A 10X12X1410L2A-122

10L2A-182

1150

17502000 $15,366 std $1,461 $3,118 $1,109 $1,725 $3,818

10L3A 10X12X12 10L3-182 1750 1470 $13,619 std $1,461 $3,118 $804 $1,725 $3,455

10L3B 10X12X11B 10L3-121 1150 1470 $13,619 std $1,461 $3,118 $804 $1,725 $4,632

10L7* 10X12X14.5 PC3669 1750 1275 $14,338 std std $3,118 std $1,725 $5,169

10L8* 10X12X17 PC3673 1750 1375 $16,599 std std $3,118 std $1,725 $5,169

12L2A 12X12X14A12L2-123

12L2-183A

1150

17501800 $15,549 std $1,498 $3,187 $1,818 $2,456 $5,969

12L2B 12X12X14

12L2-124

12L2-151

12L2-184

1150

1450

1750

1800 $15,549 std $1,498 $3,187 $1,818 $2,456 $5,969

12L2C 12X12X15** 12L2-184A 1750 1800 $16,297 std n/a n/a n/a n/a $7,075


**Heavy Duty Shaft over 13.50" diameter




For Oil Lube Bearings, Refer to Factory.

§ Steel shaft always requires bronze or 416SS sleeves and not available in balanced designs. Sleeves have to be chosen separately from

above table.

www.cranepumps.com

1/1/20Split Case

Page 6

Weinman 1200 L Series Rotating Assemblies

CONFIDENTIAL STANDARD PUMP MULTIPLIER APPLIESAll prices in U.S. dollars, F.O.B. Piqua, Ohio.



Rotating assemblies consist of all internal components, fully assembled at the factory - please specify impeller trim

and pump rotation when placing an order

List Adders

Impeller

RingsSleeved Shaft Sleeves

Model SizeCurve

NumberRPM

List price of

standard

rotating

assembly

Bronze

Impeller Wear

Rings (qty 2)

Steel

shaft

(sleeved

design) §

416SS

shaft

(sleeved

design)

Bronze

sleeve

(qty 2) ***

416SS

sleeve

(qty 2)

2L4A 2X3X10A2L4-182

2L4-362

1750

3500270 $3,693 $264 $971 $2,104 $513 $636

2L4B 2X3X10B2L4-182

2L4-362

1750

3500270 $3,693 $264 $971 $2,104 $513 $636

2L5 2X3X142L5-122

2L5-183

1150

1750310 $4,362 $264 $971 $2,104 $513 $636

2L6 2X3X12 2L6-182 1750 290 $3,666 $264 $971 $2,104 $513 $636

3L4 3X4X103L4-181

3L4-361

1750

3500380 $3,747 $289 $971 $2,215 $610 $636

3L5 3X4X143L5-121

3L5-182

1150

1750450 $4,386 $289 $971 $2,215 $610 $636

3L6 3X4X12 3L6-182 1750 390 $3,505 $289 $971 $2,215 $513 $636

4L1A 4X5X14A4L1-122

4L1-184

1150

1750530 $4,337 $446 $971 $2,294 $610 $638

4L1B 4X5X14B 4L1-182 1750 530 $4,232 $446 $971 $2,294 $610 $638

4L1C 4X5X14C 4L1-182 1750 530 $4,094 $446 $971 $2,294 $610 $638

4L2 4X5X11 4L2-182 1750 375 $4,232 $446 $971 $2,294 $513 $638

4L3 4X5X8 4L3-182 1750 330 $4,094 $446 $971 $2,294 $513 $638

4L4 4X6X104L4-181

4L4-361

1750

3500485 $4,560 $499 $971 $2,294 $727 $638

5L1 5X6X155L1-121

5L1-181

1150

1750710 $5,919 $499 $971 $2,579 $727 $638

5L2 5X6X12 5L2-184 1750 520 $4,918 $499 $971 $2,579 $610 $638

5L3 5X6X9 5L3-182 1750 420 $3,987 $499 $971 $2,579 $513 $638

6L1 6X8X16A6L1-122

6L1-182

1150

17501020 $6,812 $554 $1,040 $2,641 $804 $1,060

6L2 6X8X126L2-121

6L2-182

1150

1750615 $5,907 $554 $1,040 $2,641 $727 $1,060

6L3 6X8X96L3-121

6L3-182

1150

1750520 $4,695 $554 $1,040 $2,641 $610 $1,060

6L7* 6x8x20 PC3644 1750 840 $10,814 $554 std $2,641 std $1,060




§ Steel shaft always requires bronze or 416SS sleeves and not available in balanced designs. Sleeves have to be chosen

separately from above table.

www.cranepumps.com

1/1/20Split Case

Page 7

Weinman 1200 L SeriesRotating Assemblies

CONFIDENTIAL STANDARD PUMP MULTIPLIER APPLIESAll prices in U.S. dollars, F.O.B. Piqua, Ohio.




and pump rotation when placing an order

List Adders

Impeller

RingsSleeved Shaft Sleeves

Model SizeCurve

NumberRPM

List price of

standard

rotating

assembly

Bronze

Impeller

Wear Rings

(qty 2)

Steel shaft

(sleeved

design) §

416SS

shaft

(sleeved

design)

Bronze

sleeve

(qty 2)

***

416SS

sleeve

(qty 2)

8L1 8X10X16

8L1-121

8L1-151

8L1-181

1150

1450

1750

1550 $10,339 std $1,216 $2,731 $804 $1,637

8L2A 8X10X128L2-121

8L2-181

1150

1750 1030$7,986 std $1,216 $2,731 $804 $1,637

8L2B 8X10X13

8L2-122

8L2-152

8L2-182

1150

1450

1750

1030 $7,986 std $1,216 $2,731 $804 $1,637

8L3 8X10X108L3-122

8L3-182

1150

1750 875$8,011 std $1,216 $2,731 $727 $1,637

8L7* 8X10X17 PC3658 1750 965 $9,858 std std $2,731 std $1,637

8L8* 8X10X20 PC3661 1750 1100 $11,942 std std $2,731 std $1,637

10L2A 10X12X1410L2A-122

10L2A-182

1150

17502000 $11,985 std $1,461 $3,118 $1,109 $1,725

10L3A 10X12X12 10L3-182 1750 1470 $10,971 std $1,461 $3,118 $804 $1,725

10L3B 10X12X11B 10L3-121 1150 1470 $10,971 std $1,461 $3,118 $804 $1,725

10L7* 10X12X14.5 PC3669 1750 1275 $11,185 std std $3,118 std $1,725

10L8* 10X12X17 PC3673 1750 1375 $12,944 std std $3,118 std $1,725

12L2A 12X12X14A12L2-123

12L2-183A

1150

17501800 $12,410 std $1,498 $3,187 $1,818 $2,456

12L2B 12X12X14

12L2-124

12L2-151

12L2-184

1150

1450

1750

1800 $12,410 std $1,498 $3,187 $1,818 $2,456

12L2C 12X12X15** 12L2-184A 1750 1800 $12,711 std n/a n/a n/a n/a

* Shaft sleeve design, all others are sleeveless

**Heavy duty shaft over 13.50" diameter



§ Steel shaft always requires bronze or 416SS sleeves and not available in balanced designs. Sleeves have to be chosen

separately from above table.

www.cranepumps.com

1/1/20Split Case

Page 8

Weinman 1200 L SeriesBase Assemblies & Special Couplings

CONFIDENTIAL All prices in U.S. dollars, F.O.B. Piqua, Ohio. Prices subject to change without notice.

Weight List Weight List Weight List Weight List Weight List Weight List

(lb) Price (lb) Price (lb) Price (lb) Price (lb) Price (lb) Price

3/4 1-1/2 143T

1 1-1/2 - 2 2 - 3 145T

1-1/2 3 5 182T $1,173 170 $1,207 190 $1,329

5 7-1/2 184T

3 7-1/2 10 213T

5 10 15 215T

7-1/2 15 20 254T

10 20 25 256T

284T

15 15 30 284TS 200 $1,427 210 $1,470 220 $1,573 340 $1,939 350 $2,190 400 $2,272

20 30 40 286T

286TS

324T

25 40 50 324TS 230 $1,544 230 $1,524 240 $1,690 360 $2,055 370 $2,306 420 $2,320

30 50 60 326T

326TS

364T

40 60 75 364TS 240 $1,677 250 $1,796 370 $2,187 380 $2,446 430 $2,453

50 75 365T

365TS

404T

60 100 404TS 270 $2,432 400 $2,594 410 $3,144 460 $3,126

75 125 405T

405TS

100 150 444T

125 200 445T 460 $2,833 470 $3,508 520 $3,514

150 250…300 447T

200 449T

Metal Flex Metal Flex Metal Flex Metal Flex Metal Flex Metal Flex

Grid Spacer Grid Spacer Grid Spacer Grid Spacer Grid Spacer Grid Spacer

3/4 1-1/2 143T

1 1-1/2 - 2 2 - 3 145T

1-1/2 3 5 182T $215 $260 $215 $260 $215 $260

2 5 7-1/2 184T

3 7-1/2 10 213T

5 10 15 215T

7-1/2 15 20 254T

10 20 25 256T

284T

15 25 30 284TS $248 $411 $248 $411 $248 $411 $248 $411

20 30 40 286T

286TS

324T

25 40 50 324TS $284 $507 $284 $507 $284 $507 $284 $507 $284 $507 $284 $507

30 50 60 326T

326TS

364T

40 60 75 364TS $405 $679 $405 $679 $405 $679 $405 $679 $405 $679

50 75 365T

365TS

404T

60 100 404TS $518 $1,069 $518 $1,069 $518 $1,069 $518 $1,069

75 125 405T

405TS

100 150 444T

125 200 445T $722 $1,089 $722 $1,089 $722 $1,089

150 250…300 447T

200 449T

OSHA standards are vague and differ from each state. The Term OSHA defines a generic type and not a specific standard.

Base Plate Drip Pan Options are available on the following pageSee the next page for the Hytrel Coupling Statement

Steel Centerdrain Base, Flexible Coupling

and OSHA Guard, No Motor

4L2, 4L3, 5L3

1750

RPM

3550

RPM

Motor

Frame

Motor

Frame

$1,228

1150

RPM

1150

RPM

1750

RPM

3550

RPM

Special Coupling Adders - List Price

12L2-15

3L4, 3L5

4L1

5L2

8L1

12L2

8L2

10L2

4L4

6L2

8L1

10L3 10L8

6L1

2L4, 2L5

2L6, 3L6

4L2, 4L3

3L4, 3L5

200

6L1 6L7, 8L7

8L8

10L7

6L7, 8L7

5L1

210

4L4

$1,431

8L3

2L4, 2L5

5L3

180

6L3

$1,267

8L88L2

5L2, 6L3 6L2, 8L3

12L2

12L2-1510L7, 10L810L2, 10L3

5L1

$215 $288

2L6, 3L6

$215 $288

4L1

$215 $288

www.cranepumps.com

1/1/20Split Case

Page 9

Weinman 1200 L SeriesBase Assembly Drip Pan Adder



Note - Drip pan base dimensions are different than the published base dimensions

Please consult the factory if a dimensional drawing is required

Motor Drip Pan

Frame

56 $587

143T-145T $587

182T-184T $587

213T-215T $587

254T-256T $652

284T-286T $652

324TS-326T $652

364TS-365T $652

404TS-405T $751

444TS-445T $751

Weinman base and frame mounted pumps with motors of frame size 365 or larger

use Hytrel sleeves in the couplings. Hytrel sleeves are not suitable for variable

speed systems and must be replaced with an all metal coupling, because of space

and torque requirements.

www.cranepumps.com

1/1/20Split Case

Page 10


Mechanical Seal Options


Mechanical seals supplied on pumps in section 1200 are non-pusher type elastomer bellows seals -

Type 1 or equivalent, code B/C/CE (Y2). These materials are recommended for water temperatures

up to 180°F and pressures to 150 psi. Dissolved solids limited to 250 PPM.

Unbalanced seals (carbon/ceramic & carbon/ni-resist) should be limited to 150 psi suction pressure to insure

optimum seal life.

Mechani Pump Models1 2 3 4 5 6 7 8

2L4, 2L5 3L4 6L1 12L2C 6L7

2L6, 3L6 3L5 5L1 8L2 10L2A 8L1 8L7

4L2, 4L3 4L1 6L2 10L2 12L2 8L8

5L3 5L2, 6L3 8L3 10L3 10L7, 10L8

Weinman List List List List List List List List

Code Adder Adder Adder Adder Adder Adder Adder Adder

Water to 180°F, 150 psi

B/C/CE


B/C/NR


EP/C/SC


EP/SC/SC


V/C/SC


V/SC/SC

Water to 180°F, 250 psi Use Un Bal Use Un Bal

B/C/CE Y58 or Y60 Y58 or Y60


EP/C/SC Y58 or Y60 Y58 or Y60


EP/SC/SC Y58 or Y60 Y58 or Y60


V/C/SC Y58 or Y60 Y58 or Y60


V/SC/SC Y58 or Y60 Y58 or Y60

$1,328

Elastomer

B = Buna-N

V = Viton

EP = EPDM/EPR

18-8 Stainless SteelNR = Ni-Resist

CE = Ceramic

Explanations of Seal Codes - Example B/C/CE

Rotating Face Stationary Face Spring & Retainer

$6,886$3,833

$3,833

$3,397

SC = Silicon Carbide

C = Carbon

Kynar Separator

PN AS-DK12K-KIT

$1,531 $1,793 $4,470

$2,376 $2,696 $3,397

$1,793

$3,503

$4,595

$3,833

$3,596

$3,628$3,559$3,379

$2,920$2,197$2,101

$2,320

$1,592

$2,528

$2,920

$3,212

$3,274

$3,233

$3,557

$3,551

$1,964 $2,312 $2,437

$2,752

Type 1B: Balanced Seals (Includes Bronze Sleeves) - Required with the use of a Ductile iron case

Y62

$3,156 $3,325 $4,392 $4,595Y52

$1,092 $1,231

$5,312

$3,379 $3,559 $3,628 $3,833 $5,551

$3,144 $3,323 $3,393 $3,597 $6,650

Y2

Y58

Y60

Std

$3,010

$1,894

$1,787

$3,201$2,943 $3,761

Std

$3,311

$1,722

$2,040

Type 1: Unbalanced Seals

Service

Y34

Y2

Y58

Y60

Y52

Y62

Std

$204 $1,938$1,938 $1,592$1,070$497$234

$3,274$3,365

$3,212

StdStd StdStdStd

www.cranepumps.com

1/1/20Split Case

Page 11

Weinman 1100 LVM Series

Vertical Single Stage Split Case



Standard Materials of Construction

Casing Cast iron

Impeller ASB - Aluminum-Silicon-Brass

Case wear ring Bronze

Shaft 416SS on sleeveless design, 4140 Steel on L7 & L8

Shaft Sleeve Bronze (Standard on L7 & L8) Optional on L1 ~ L6

Mechanical seal Single Type 1, Buna/Carbon/Ceramic

Seal Gland Cast iron


Models



Max Temp 100°F 250°F 100°F 250°F 100°F 100°F

Max Working Pressure 175 psig 150 psig 450 psig 400 psig 150 psig ** 250 psig




** Cast iron 6L7 and 8L8 have 250 lb. Flat Face Discharge Flange and Casing designed for 215 PSIG


L1 ~ L6 L7 & L8

150 Lb Flat Face 300 Lb Flat Face


www.cranepumps.com

1/1/20Split Case

Page 12

Weinman 1100 LVM Series

Vertical Single Stage Split Case



Single Stage, Double Suction, Split Case Pumps for Vertical Mounting

with B/C/CE Y2 Mechanical Seals, Bronze Fitted

Table No 1 - Pump Only - No Base or Coupling (Must Add Price for Base, Coupling and Guard) Model Size DI Flanges Bronze Brz sleeves 416SS sleeves 416SS

Basic Pump 300#/Requires Impeller (Std with un- Shaft (std w

Weight Std. Fitted Wear Ring balanced sleeveless

(lb) List Price balanced seal List Adder seal option) design)

2LVM4 2x3x10 270 $6,345 $624 $264 $610 $667 $2,208

2LVM5 2x3x14 310 $8,070 $1,696 $264 $610 $667 $2,208

2LVM6 2x3x12 290 $6,455 $1,137 $264 $610 $667 $2,208

3LVM4 3x4x10 380 $7,035 $1,040 $289 $610 $667 $2,325

3LVM5 3x4x14 450 $8,024 $2,154 $289 $610 $667 $2,325

3LVM6 3x4x12 390 $7,022 $1,875 $289 $610 $667 $2,325

4LVM1 4x5x14 530 $8,999 $2,205 $446 $610 $670 $2,408

4LVM2 4x5x11 375 $7,789 $1,875 $446 $610 $670 $2,408

4LVM3 4x5x8 330 $7,574 RTF $499 $610 $670 $2,408

4LVM4 4x6x10 485 $8,293 RTF $499 $610 $670 $2,408

5LVM1 5x6x15 710 $10,400 $2,248 $499 $610 $670 $2,708

5LVM2 5x6x12 520 $8,849 $1,975 $499 $610 $670 $2,708

5LVM3 5x6x9 420 $7,413 RTF $499 $610 $670 $2,708

6LVM1 6x8x16 1020 $11,785 $2,522 $554 $610 $1,112 $2,773

6LVM2 6x8x12 615 $10,378 $2,273 $554 $610 $1,112 $2,773

6LVM3 6x8x9 520 $8,502 RTF $554 $610 $1,112 $2,773

6LVM7* 6x8x20 840 $16,152 $2,999 $554 std $1,112 $2,773

8LVM1 8x10x16 1550 $17,243 $3,783 std $1,818 $1,718 $2,866

8LVM2 8x10x13 1030 $13,599 $3,257 std $804 $1,718 $2,866

8LVM3 8x10x10 875 $13,643 $2,469 std $804 $1,718 $2,866

8LVM7* 8x10x17 965 $16,503 $2,972 std std $1,718 $2,866

8LVM8* 8x10x20 1100 $19,731 $4,328 std std $1,718 $2,866

10LVM2 10x12x14 2000 $19,794 $3,818 std $1,109 $1,813 $3,274

10LVM3 10x12x12 1470 $17,686 $3,455 std $804 $1,813 $3,274

10LVM7* 10x12x14 1275 $18,552 $5,169 std std $1,813 $3,274

10LVM8* 10x12x17 1375 $21,283 $5,169 std std $1,813 $3,274

12LVM2 12x12x14 1800 $20,016 $7,075 std $1,818 $2,578 $3,346

12LVM2-15 12x12x15 1800 $20,917 $7,075 N/A N/A N/A N/A

RTF = Refer to Factory * Shaft Sleeve Design


www.cranepumps.com

1/1/20Split Case

Page 13

Vertical Split Case Pump Base Assemblies

Fabricated Vertical Base and Guard, No Motor

CONFIDENTIALAll prices in U.S. dollars, F.O.B. Piqua, Ohio. Short shaft motors must be used with 3600 rpm applications, 284TSC frame and larger


Motor

1150 1750 3550 Frame Weight List Weight List Weight List Weight List Weight List Weight List

RPM RPM RPM (lb) Price (lb) Price (lb) Price (lb) Price (lb) Price (lb) Price

3/4 11/2 143TCV

1 11/2 - 2 2 - 3 145TCV

11/2 3 5 182TCV 255 $3,075 255 $3,075 255 $3,075

2 5 71/2 184TCV

3 71/2 10 213TCV

5 10 15 215TCV

71/2 15 20 254TCV

10 20 25 256TCV

284TCV

15 25 30 284TSCV 300 $4,533 300 $4,533 310 $4,219 510 $6,145 525 $6,145 600 $8,563

20 30 40 286TCV

286TSCV

324TCV

25 40 50 324TSCV 320 $4,533 320 $4,533 335 $5,033 520 $6,232 540 $6,232 610 $8,741

30 50 60 326TCV

326TSCV

364TCV

40 60 75 364TSCV 350 $4,859 370 $5,033 540 $6,463 570 $6,463 615 $8,926

50 75 365TCV

365TSCV

60 100 404TSCV 400 $5,513 600 $6,677 605 $6,677 630 $9,248

75 125 405TSCV

100 150 444TSCV

125 200 445TSCV 630 $6,988 645 $6,988 780 $9,670

150 250…300 447TSCV

200 449TSCV


Motor Spacer Spacer Spacer Spacer Spacer Spacer Spacer Spacer Spacer Spacer Spacer Spacer

1150 1750 3550 Frame List List List List List List List List List List List List

RPM RPM RPM Adder Adder Adder Adder Adder Adder Adder Adder Adder Adder Adder Adder

3/4 11/2 143TCV

1 1 1/2 - 2 2 - 3 145TCV

11/2 3 5 182TCV $534 $322 $534 $322 $534 $322

2 5 71/2 184TCV

3 71/2 10 213TCV

5 10 15 215TCV

71/2 15 20 254TCV

10 20 25 256TCV

284TCV

15 25 30 284TSCV $623 $507 $623 $507 $623 $507 $623 $507

20 30 40 286TCV

286TSCV

324TCV

25 40 50 324TSCV $711 $623 $711 $623 $711 $623 $711 $623 $711 $623 $711 $623

30 50 60 326TCV

326TSCV

364TCV

40 60 75 364TSCV $1,012 $833 $1,012 $833 $1,012 $833 $1,012 $833 $1,012 $833

50 75 365TCV

365TSCV

60 100 404TSCV $1,296 $1,312 $1,296 $1,312 $1,296 $1,312 $1,296 $1,312

75 125 405TSCV

100 150 444TSCV

125 200 445TSCV $1,814 $1,341 $1,814 $1,341 $1,814 $1,341

150 250 300 447TSCV

200 449TSCV


10L2, 10L3

Vertical base includes an OSHA guard

$562 $562 $353$353 $562 $353

3L4, 3L5

4L1

2L4, 2L5

2L6, 3L6

6L2, 8L3

Motor hp at

6L14L4

5L1 8L88L2

10L7, 10L8 12L2-15

8L8 12L2

8L1

8L1

6L7, 8L7

10L7, 10L8 12L2, 12L2-15

6L7, 8L7

5L1

290

Add for the Coupling

Use spacer coupling w/284 frame and larger

4L2, 4L3, 5L3

2L6, 3L6 4L1

265

5L2, 6L3

275 $3,735

265 $3,735

275 $3,735

Motor hp at

5L2, 6L3

$3,735

3L4, 3L5

4L2, 4L3, 5L3

2L4, 2L5

6L2, 8L3

4L4

$4,219

8L2

6L1

$4,066

10L2, 10L3

295

www.cranepumps.com

1/1/20Split Case

Page 14

Vertical Split Case Pumps

Mechanical Seal Options


Mechanical seals supplied on pumps in section 1100 are non-pusher type elastomer bellows seals -

Type 1 or equivalent, code B/C/CE (Y2). These materials are recommended for water temperatures

up to 180°F and pressures to 150 psi. Dissolved solids limited to 250 PPM.

Unbalanced seals (Buna/Carbon/Ceramic) should be limited to 150 psi suction pressure to insure

optimum seal life.

Mechanic Pump Models1 2 3 4 5 6 7 8

2L4, 2L5 3L4 6L1 12L2C 6L7

2L6, 3L6 3L5 5L1 8L2 10L2A 8L1 8L7

4L2, 4L3 4L1 6L2 10L2 12L2 8L8

5L3 5L2, 6L3 8L3 10L3 10L7, 10L8

Weinman List List List List List List List List



B/C/CE


B/C/NR - Not Available with NSF372


EP/C/SC


EP/SC/SC


V/C/SC


V/SC/SC


B/C/CE Y58 or Y60 Y58 or Y60


EP/C/SC Y58 or Y60 Y58 or Y60


EP/SC/SC Y58 or Y60 Y58 or Y60


V/C/SC Y58 or Y60 Y58 or Y60


V/SC/SC Y58 or Y60 Y58 or Y60

Elastomer

B = Buna-N

V = Viton

EP = EPDM/EPR SC = Silicon Carbide

Kynar Separator

PN AS-DK12K-KIT$1,328

$3,559$3,379

$3,156

$3,833


Rotating Face Stationary Face Spring & Retainer

CE = Ceramic

C = Carbon NR = Ni-Resist 18-8 Stainless Steel

Y34 $1,938

Std

$1,722 $1,787 $2,101 $2,197 $2,920 $3,010

$204 $234 $497 $1,070 $1,592 $1,938

Std Std Std

$3,233

$3,144

Y62

Y52

Y60

Y2 $1,531$1,231 $4,470$1,793

$3,628

$4,392

$1,092

$5,551

$3,628$3,379 $3,559

$3,325 $5,312

$6,886

$4,595

$3,833


$3,948

$4,733

$3,948

$3,597

$1,793

$3,397

$3,274

$3,212

$3,761

$3,551

$3,557

$3,503

$3,365

$3,311

$3,397

$3,274

$3,212

$3,201

Y58 $6,650$3,597$3,393$3,323

Type 1: Unbalanced Seals

$2,920

$1,592

StdStdStdStd

Y62

Y52

Y60

$2,752

$2,437

$2,528

$2,312

$2,696

$2,320

$1,964

$2,376

$2,040

$1,894

$2,943

Service

Y58

Y2

www.cranepumps.com

1/1/20Split Case

Page 15

Weinman 1310 JD Series

Two Stage Split Case Pumps


Two Stage, Horizontal Split Case Ball Bearing Centrifugal Pumps Options

Standard Construction

Interstage Diaphragm

Water Jacketed BearingsFor boiler feed or booster service when handling a liquid at a temperature of 200° F up to 250° F JD

pumps require water-jacketed outboard bearings. See add price. When handling any liquid at a temperature

above 250° F, JD pumps require both water-jacketed inboard and outboard bearings and high temperature

gaskets. Specify when ordering. Consult factory for temperature above 275° F.

Shaft Steel

Gland Studs and Nuts Bronze

Sleeve Nut Bronze

Shaft Sleeve 416 SS

Gland Bronze

Throat Bushing Bronze

Seal Cage Bronze

Case Wearing Rings Bronze

Casing Cast Iron

Impellers Bronze

www.cranepumps.com

1/1/20Split Case

Page 16


Model JD Pumps, Bases and Adders

CONFIDENTIAL Two Stage, Horizontal Split CaseAll prices in U.S. dollars, F.O.B. Piqua, Ohio. Ball Bearing Centrifugal PumpsPrices subject to change without notice.

Table No: 1 - Pump Only, Standard is packed, mechanical seals are available as an option

1.5JD 2JD 3JD

$11,110 $11,164 $12,732

3" 3" 4"

1.5" 2" 3"

Weight (lb) 494 624

Ceramic Coated 416 SS Sleeves $1,847 $1,847 $1,869

Water Jacketed Thrust Bearing (Inbd/Outbd) ** $1,835 $1,835 $1,835

Water Jacketed Thrust Bearing (Outboard) ** $1,048 $1,048 $1,099

Double Shaft Extension $839 $839 $907

Recirculating Orifice $455 $455 $489

Packed Pump Only

** See information on Page 19

Table No: 2 - Standard Pump with Steel Base, Flexible Coupling and Guard, No Motor (Add motor from "T" frame motor pricing from the Motor Price Book)

Weight List Weight List Weight List

(lb) Price (lb) Price (lb) Price

- 2 145T 610 $11,687 630 $11,764 - -

- 3 182T 610 $11,687 630 $11,764 - -

- 5 184T 610 $11,687 630 $11,764 800 $13,130

- 71/2 213T 628 $11,858 648 $11,858 800 $13,300

15 10 215T 628 $11,858 648 $11,858 800 $13,300

20 15 254T 645 $11,858 665 $11,858 800 $13,394

25 20 256T 645 $11,858 665 $11,858 800 $13,394

30 - 284TS 645 $12,125 665 $12,125 800 $13,567

40 - 286TS 645 $12,125 665 $12,125 815 $13,567

50 - 324TS 670 $12,125 690 $12,125 815 $13,567

60 - 326TS 670 $12,125 690 $12,125 815 $13,567

75 - 364TS 670 $12,900 690 $12,900 825 $14,345

100 - 365TS - - 700 $12,900 825 $14,345

125 - 404TS - - 720 $12,900 900 $14,345

150 - 405TS - - - - 900 $14,345

$937

See Motor Section Pages 2-3 for Mounting of Customer Supplied Motors

Model

List Prices of Adders

Model 1.5JD 2JD

Pump Suction (in)

List Price of Bare Pump

Pump Adders

Pump Discharge (in)

3JD

Pump Suction (in) 3" 3" 4"

OSHA GUARD WITH CLOSED ENDS

Pump Discharge (in) 1.5" 2" 3"

3500 RPM 1750 RPM NEMA

www.cranepumps.com

1/1/20Split Case

Page 17


Model JD Rotating Assemblies



The standard rotating assembly is packed, mechanical seals are available as an option


when placing an order

The standard rotating assembly is packed, mechanical seals are available as an option


when placing an order

Weight List Weight List Weight List

(lb) Price (lb) Price (lb) Price

480 $8,554 494 $8,596 624 $9,804

1.5JD 2JD 3JD

$1,847 $1,847 $1,869

$1,835 $1,835 $1,835

Water Jacketed Thrust Bearing (Outboard) ** $1,048 $1,048 $1,099

$839 $839 $907

$455 $455 $489

Packed Pump Only

Remember to add all appropriate adders to the rotating assembly when ordering. Please refer to the original

serial number when placing an order.

For mechanical seal adders, please see the following page

2JD 3JD

Pump Suction (in) 3" 3" 4"

Model 1.5JD

Recirculating Orifice

2" 3"

Rotating Assembly List Price

Ceramic Coated 416 SS Sleeves

Water Jacketed Thrust Bearing (Inbd/Outbd) **

Pump Discharge (in) 1.5"

Double Shaft Extension

Rotating Assembly AddersList Prices of Adders

www.cranepumps.com

1/1/20Split Case

Page 18


Mechanical Seals & Options



Rotation

Pumps are assembled in Right Hand (clockwise) rotation with suction on right when viewed from

driving end unless otherwise specified. Left Hand (counter clockwise) rotation available. Specify at the time of order.

No Extra Charge

Flange Ratings

Pump discharge flanges conform to American Standard for cast iron, class 250 (BIGB-1944) except that they

have flat face instead of .0625" raised face. Pump suction flanges conform to American Standard for cast iron,

class 125 (BIG 1-1948). Companion Flanges are not included with pump.

** Recirculating Orifice **

Steam flashing may occur when pumping high temperature liquids at or near pump shut-off head. Add for non-corrosive

recirculating orifices consisting of a machined brass body with .5" internal pipe threads and a removable, hardened

stainless steel insert orifice. Various size inserts are available to maintain flow of 1/2 GPM per BHP at shut off head.

Non-corrosive brass with 1/2" internal pipe threads and removeable hardened SS insert orifice $507 List

Tests: All pumps are hydrostatic pressure tested at 1-1/2 times the discharge pressure, minimum test

of 125 PSIG when assembled. Refer to Test Price Pages to order a certified test and report

Export: Export boxing - Refer to International Inside Sales

Standard Packing: Standard graphite filament lubricated packing - max 275 °F (-M21)

** Water Jacketed Bearings **

For boiler feed or booster service when handling a liquid at a temperature of 200°F up to 250°F, JD

pumps require water-jacketed outboard bearings. See add price. When handling any liquid at a temperature

above 250° F, JD pumps require both water-jacketed inboard and outboard bearings and high temperature

gaskets. Please specify when ordering. Consult the factory for temperature above 275° F.

1.5JD 2JD 3JD

Y34 B/C/NR Carbon Ni Resist Buna N 150 180 $116 $125 $133

Y2 B/C/CE Carbon Ceramic Buna N 150 180 $125 $165 $408

Y10 B/C/TC Carbon Tungsten Buna N 150 180 $796 $952 $1,220

Y6 V/C/NR Carbon Ni Resist Viton 150 250 $222 $245 $300

Y25 V/C/CE Carbon Ceramic Viton 150 250 $490 $593 $845

Y17 V/C/TC Carbon Tungsten Viton 150 250 $1,605 $1,820 $1,986

Packing Adder: Carbon Filament/Graphite Packing $286

Notes:

1. Price includes two single seals with flexible mounted stationary seats and flush type gland plates of the same

material as the casing.

V = Viton CE = Ceramic Steel

TC = Tungsten Carbide

1

B = Buna-N NR = Ni-resist 18-8 Stainless

C = Carbon

Single

Seal

Seal

Type

Explanations of Seal Codes

Elastomer Rotating Face Stationary Face Spring & Retainer

Based on Pump Size

List Price AdderSeal

Code

Rotating

Face

Stationary

Face,

O-Ring Mt'd

Bellows or

Shaft

Packing

Max

Pressure

PSIG

Temp Limit

°F

www.cranepumps.com

1/1/20Split Case

Page 19

Weinman 1210 L SeriesNSF 61 / 372

Single Stage Horizontal Split Case Pumps



NSF 61 / 372 Standard Materials of ConstructionThe table below shows materials of construction for Standard Pumps only without adders

Item Description

Casing

Impeller Aluminum

Case wear ring (2 qty)

Impeller wear ring (2 qty if

provided as standard)

Shaft Sleeve (2 qty)

Mechanical seal (2 qty)

Seal collar (2 qty)

Flush Piping


Models



Max Temp

Max Working Pressure 150 psig * 250 psig

FF = Flat Face

150 Lb ASA Flanges have same drilling as 150 Lb Flat Face steel flanges

300 Lb ASA Flanges have same drilling as 300 Lb Flat Face steel flanges


* Cast iron 6L7 and 8L8 have 250 lb. Flat Face Discharge Flange and Casing designed for 215 PSIG


73.4°F / 23°C 73.4°F / 23°C 73.4°F / 23°C

175 psig 450 psig

L1 ~ L6 L7 & L8

125 Lb FF 300 Lb FF


Shaft collar (2 qty)

Sleeveless design (L1, L2, L3, L4, L5, L6):

416SS

Sleeveless design (L1, L2 except 12L2C, L3, L4,

L5, L6):

416SS

Sleeved design (L7, L8):

None

12L2C and Sleeved design (L7, L8):

None

Copper tube with SS fittings Copper tube with SS fittings

416SS (L7 & L8 only) 416SS

Unbalanced Single Type 1, Buna/Carbon/Ceramic

FDA approved

Balanced Single Type 1, Buna/Carbon/Ceramic FDA

approved in L1, L2, L3, L4, L5 and L6;

Unbalanced Single Type 1, Buna/Silicon

Carbide/Silicon Carbide FDA approved in L7, L8 and

12L2C

416SS in L1, L2, L3, L4, L5, L6;

None in L7 & L8None

None in 2L, 3L, 4L, 5L, 6L;

Aluminum Bronze in 4L1B, 8L, 10L & 12L

None in 2L, 3L, 4L, 5L, 6L;

Aluminum Bronze in 4L1B, 8L, 10L & 12L

Shaft


416SS


416SS


4140 alloy steel


4140 alloy steel

125# Flange Rating 300# Flange RatingCast iron Ductile iron

Aluminum Bronze Aluminum Bronze

1/1/20Split Case

Page 20


NSF 61 / 372Single Stage Horizontal Split Case Pumps


Standard pump Construction:

L1, L2, L3, L4, L5, L6: 416SS shaft, sleeveless, Aluminum Bronze rings, FDA approved B/C/CE seal

L7, L8: Steel shaft, 416SS sleeves, Aluminum Bronze rings, FDA approved B/C/CE seal

See the seal options page for more choicesPlease specify pump rotation and impeller trim when placing an order

All list prices mentioned are for NSF 61 / 372 unless otherwise specifically mentioned

List Adders For NSF 61 / 372

Sleeveless

Shaft300# Flange

Model SizeCurve

NumberRPM Weight

Standard

NSF

61/372

List Price

Aluminum

Bronze

impeller

wear ring

(qty 2)

12% Cr SS

impeller

wear ring

(qty 2)

316SS shaft

Steel shaft

(sleeved

design) §

416SS shaft

(sleeved

design)

316SS shaft

(sleeved

design)

416SS

Sleeve

(qty 2)

316SS

sleeve

(qty 2)

Ductile Iron

flanges -

requires

use of a

balanced

seal

2L4A 2X3X10A2L4-182

2L4-362

1750

3500270 $5,508 $484 $680 $2,119 $990 $2,145 $2,548 $714 $2,111 $719

2L5 2X3X142L5-122

2L5-183

1150

1750310 $8,407 $484 $680 $2,119 $990 $2,145 $2,548 $714 $2,111 $909

2L6 2X3X12 2L6-182 1750 290 $5,823 $484 $680 $2,119 $990 $2,145 $2,548 $714 $2,111 $1,631

3L4 3X4X103L4-181

3L4-361

1750

3500380 $6,438 $558 $810 $2,180 $990 $2,258 $2,596 $714 $2,180 $291

3L5 3X4X143L5-121

3L5-182

1150

1750450 $5,140 $558 $810 $2,180 $990 $2,258 $2,596 $714 $2,180 $1,052

3L6 3X4X12 3L6-182 1750 390 $4,513 $558 $810 $2,180 $990 $2,258 $2,596 $714 $2,180 $2,474

4L1A 4X5X14A4L1-122

4L1-184

1150

1750530 $5,430 $600 $1,347 $2,713 $990 $2,338 $2,596 $716 $2,422 $2,221

4L1B 4X5X14B 4L1-182 1750 530 $6,344 std $1,347 $2,713 $990 $2,338 $2,596 $716 $2,422 $2,182

4L2 4X5X11 4L2-182 1750 375 $4,852 $600 $1,347 $2,713 $990 $2,338 $2,596 $716 $2,422 $3,240

4L3 4X5X8 4L3-182 1750 330 $8,769 $600 $1,347 $2,713 $990 $2,338 $2,596 $716 $2,422 $884

4L4 4X6X104L4-181

4L4-361

1750

3500485 $7,814 $600 $1,347 $2,713 $990 $2,338 $2,596 $716 $2,422 $2,227

5L1 5X6X155L1-121

5L1-181

1150

1750710 $10,156 $651 $1,347 $2,336 $990 $2,629 $2,990 $716 $2,964 $749

5L2 5X6X12 5L2-184 1750 520 $9,819 $651 $1,347 $2,336 $990 $2,629 $2,990 $716 $2,964 $761

5L3 5X6X9 5L3-182 1750 420 $7,669 $651 $1,347 $2,336 $990 $2,629 $2,990 $716 $2,964 $2,720

6L1 6X8X16A6L1-122

6L1-182

1150

17501020 $6,046 $709 $1,528 $2,336 $1,061 $2,692 $3,106 $1,191 $3,304 $1,840

6L2 6X8X126L2-121

6L2-182

1150

1750615 $7,816 $709 $1,528 $2,336 $1,061 $2,692 $3,106 $1,191 $3,304 $466

6L3 6X8X96L3-121

6L3-182

1150

1750520 $8,781 $709 $1,528 $2,336 $1,061 $2,692 $3,106 $1,191 $3,304 $737

6L7* 6x8x20 PC3644 1750 840 $21,349 $709 $1,528 n/a std $2,692 $3,106 std $3,304 $528

Prices mentioned above are adders only, and not actual component prices. Consult factory for replacement prices.

* sleeved design, all others are standard sleeveless

§ steel shaft always requires 416SS or 316SS sleeves, and not available in balanced design. Sleeves have to chosen separately from above table.

416SS/ 316SS sleeve prices mentioned above have to be added separately to the sleeved shaft price (sleeved shaft prices do not include price of sleeves)

Other options may be available for NSF372 only, at additional cost. Consult factory for pricing.

n/a = not available cf = consult factory std = standard For Oil Lube Bearings, Refer to Factory.

Type 1B: Balanced Seals (Includes Sleeves) - Required with the use of a ductile iron case (L1 - L6) See seal options for L7 & L8, Type 1 working pressures

sleeve options mentioned above are for unbalanced seals only. List prices for 416SS & 316SS sleeve options for balanced seals are included in balanced seal list price. Refer to seal options page for balanced

seal options.

Impeller Rings Sleeved Shaft Sleeves

1/1/20Split Case

Page 21


NSF 61 / 372Single Stage Horizontal Split Case Pumps


Standard pump MOC:






Sleeveless

Shaft

300#

Flange

Model SizeCurve

NumberRPM Weight

Standard

NSF 61/372

List Price

Aluminu

m Bronze

impeller

wear ring

(qty 2)

12% Cr SS

impeller

wear ring

(qty 2)

316SS

shaft

Steel shaft

(sleeved

design) §

416SS

shaft

(sleeved

design)

316SS

shaft

(sleeved

design)

416SS

Sleeve

(qty 2)

316SS

sleeve

(qty 2)

Ductile Iron

flanges -

requires

use of a

balanced

seal

8L1 8X10X16

8L1-121

8L1-151

8L1-181

1150

1450

1750

1550 $14,874 std $1,528 $2,449 $1,240 $2,784 $3,163 $1,839 $3,813 $561

8L2A 8X10X128L2-121

8L2-181

1150

17501030 $9,081 std $1,528 $2,449 $1,240 $2,784 $3,163 $1,839 $3,813 $1,675

8L2B 8X10X13

8L2-122

8L2-152

8L2-182

1150

1450

1750

1030 $14,253 std $1,528 $2,449 $1,240 $2,784 $3,163 $1,839 $3,813 $553

8L3 8X10X108L3-122

8L3-182

1150

1750875 $11,906 std $1,528 $2,449 $1,240 $2,784 $3,163 $1,839 $3,813 $755

8L7* 8X10X17 PC3658 1750 965 $17,029 std $1,528 n/a std $2,784 $3,163 std $3,813 $1,811


10L2A 10X12X1410L2A-122

10L2A-182

1150

17502000 $19,047 std $1,622 $2,810 $1,489 $3,178 $3,406 $1,940 $4,067 $618

10L3A 10X12X12 10L3-182 1750 1470 $13,925 std $1,622 $2,810 $1,489 $3,178 $3,406 $1,940 $4,067 $3,882

10L3B 10X12X11B 10L3-121 1150 1470 $15,993 std $1,622 $2,810 $1,489 $3,178 $3,406 $1,940 $4,067 $3,572

10L7* 10X12X14.5 PC3669 1750 1275 $17,015 std $1,622 n/a std $3,178 $3,406 std $4,067 $5,084


12L2A 12X12X14A12L2-123

12L2-183A

1150

17501800 $18,060 std $1,702 $3,115 $1,527 $3,249 $3,406 $2,759 $4,288 $5,771

12L2B 12X12X14

12L2-124

12L2-151

12L2-184

1150

1450

1750

1800 $17,763 std $1,702 $3,115 $1,527 $3,249 $3,406 $2,759 $4,288 $5,771

12L2C 12X12X15** 12L2-184A 1750 1800 $22,560 std $1,702 $3,115 n/a n/a n/a n/a n/a cf



** Heavy duty shaft over 13.50" diameter






sleeve options mentioned above are for unbalanced seals only. List prices for 416SS & 316SS sleeve options for balanced seals are included in balanced seal list price. Refer to seal options page for

balanced seal options.

Impeller Rings Sleeved Shaft Shaft Sleeves

1/1/20Split Case

Page 22


NSF 61 / 372Single Stage Horizontal Split Case Rotating Assemblies


STANDARD PUMP MULTIPLIER APPLIESStandard pump MOC:






Sleeveless

Shaft

Model SizeCurve

NumberRPM Weight

Standard

NSF

61/372 List

Price

Aluminum

Bronze

impeller

wear ring

(qty 2)

12% Cr SS

impeller

wear ring

(qty 2)

316SS shaft

Steel shaft

(sleeved

design) §

416SS

shaft

(sleeved

design)

316SS

shaft

(sleeved

design)

416SS

Sleeve

(qty 2)

316SS

sleeve

(qty 2)

2L4A 2X3X10A2L4-182

2L4-362

1750

3500270 $3,547 $484 $680 $2,119 $1,092 $2,365 $2,548 $714 $2,111

2L5 2X3X142L5-122

2L5-183

1150

1750310 $5,999 $484 $680 $2,119 $1,092 $2,365 $2,548 $714 $2,111

2L6 2X3X12 2L6-182 1750 290 $4,568 $484 $680 $2,119 $1,092 $2,365 $2,548 $714 $2,111

3L4 3X4X103L4-181

3L4-361

1750

3500380 $4,653 $558 $810 $2,180 $1,092 $2,489 $2,596 $714 $2,180

3L5 3X4X143L5-121

3L5-182

1150

1750450 $3,523 $558 $810 $2,180 $1,092 $2,489 $2,596 $714 $2,180

3L6 3X4X12 3L6-182 1750 390 $3,539 $558 $810 $2,180 $1,092 $2,489 $2,596 $714 $2,180

4L1A 4X5X14A4L1-122

4L1-184

1150

1750530 $3,817 $600 $1,347 $2,713 $1,092 $2,577 $2,596 $716 $2,422

4L1B 4X5X14B 4L1-182 1750 530 $4,611 std $1,347 $2,713 $1,092 $2,577 $2,596 $716 $2,422

4L2 4X5X11 4L2-182 1750 375 $3,729 $600 $1,347 $2,713 $1,092 $2,577 $2,596 $716 $2,422

4L3 4X5X8 4L3-182 1750 330 $6,304 $600 $1,347 $2,713 $1,092 $2,577 $2,596 $716 $2,422

4L4 4X6X104L4-181

4L4-361

1750

3500485 $6,140 $600 $1,347 $2,713 $1,092 $2,577 $2,596 $716 $2,422

5L1 5X6X155L1-121

5L1-181

1150

1750710 $7,863 $651 $1,347 $2,336 $1,092 $2,898 $2,990 $716 $2,964

5L2 5X6X12 5L2-184 1750 520 $7,760 $651 $1,347 $2,336 $1,092 $2,898 $2,990 $716 $2,964

5L3 5X6X9 5L3-182 1750 420 $6,412 $651 $1,347 $2,336 $1,092 $2,898 $2,990 $716 $2,964

6L1 6X8X16A6L1-122

6L1-182

1150

17501020 $3,605 $709 $1,528 $2,336 $1,170 $2,967 $3,106 $1,191 $3,304

6L2 6X8X126L2-121

6L2-182

1150

1750615 $5,335 $709 $1,528 $2,336 $1,170 $2,967 $3,106 $1,191 $3,304

6L3 6X8X96L3-121

6L3-182

1150

1750520 $6,338 $709 $1,528 $2,336 $1,170 $2,967 $3,106 $1,191 $3,304

6L7* 6x8x20 PC3644 1750 840 $16,010 $709 $1,528 n/a std $2,967 $3,106 std $3,304








sleeve options mentioned above are for unbalanced seals only. List prices for 416SS & 316SS sleeve options for balanced seals are included in balanced seal list price. Refer to seal options

page for balanced seal options

SleevesSleeved ShaftImpeller Rings

1/1/20Split Case

Page 23


NSF 61 / 372Single Stage Horizontal Split Case Rotating Assemblies


STANDARD PUMP MULTIPLIER APPLIESStandard pump MOC:






Sleeveless

Shaft

Model SizeCurve

NumberRPM Weight

Standard

NSF

61/372

List Price

Aluminum

Bronze

impeller

wear ring

(qty 2)

12% Cr SS

impeller

wear ring

(qty 2)

316SS shaft

Steel shaft

(sleeved

design) §

416SS

shaft

(sleeved

design)

316SS

shaft

(sleeved

design)

416SS

Sleeve

(qty 2)

316SS

sleeve

(qty 2)

8L1 8X10X16

8L1-121

8L1-151

8L1-181

1150

1450

1750

1550 $10,381 std $1,528 $2,449 $1,368 $3,068 $3,163 $1,839 $3,813

8L2A 8X10X128L2-121

8L2-181

1150

17501030 $6,200 std $1,528 $2,449 $1,368 $3,068 $3,163 $1,839 $3,813

8L2B 8X10X13

8L2-122

8L2-152

8L2-182

1150

1450

1750

1030 $10,567 std $1,528 $2,449 $1,368 $3,068 $3,163 $1,839 $3,813

8L3 8X10X108L3-122

8L3-182

1150

1750875 $8,345 std $1,528 $2,449 $1,368 $3,068 $3,163 $1,839 $3,813

8L7* 8X10X17 PC3658 1750 965 $12,443 std $1,528 n/a std $3,068 $3,163 std $3,813


10L2A 10X12X1410L2A-122

10L2A-182

1150

17502000 $13,835 std $1,622 $2,810 $1,641 $3,505 $3,406 $1,940 $4,067

10L3A 10X12X12 10L3-182 1750 1470 $10,185 std $1,622 $2,810 $1,641 $3,505 $3,406 $1,940 $4,067

10L3B 10X12X11B 10L3-121 1150 1470 $10,655 std $1,622 $2,810 $1,641 $3,505 $3,406 $1,940 $4,067

10L7* 10X12X14.5 PC3669 1750 1275 $12,434 std $1,622 n/a std $3,505 $3,406 std $4,067


12L2A 12X12X14A12L2-123

12L2-183A

1150

17501800 $13,153 std $1,702 $3,115 $1,683 $3,582 $3,406 $2,759 $4,288

12L2B 12X12X14

12L2-124

12L2-151

12L2-184

1150

1450

1750

1800 $12,974 std $1,702 $3,115 $1,683 $3,582 $3,406 $2,759 $4,288

12L2C 12X12X15** 12L2-184A 1750 1800 $16,483 std $1,702 $3,115 n/a n/a n/a n/a n/a



** Heavy duty shaft over 13.50" diameter






sleeve options mentioned above are for unbalanced seals only. List prices for 416SS & 316SS sleeve options for balanced seals are included in balanced seal list price. Refer to seal options

page for balanced seal options.

Sleeved ShaftImpeller Rings Sleeves

1/1/20Split Case

Page 24

Weinman 1210 L SeriesBase Assemblies & Special Couplings


Weight List Weight List Weight List Weight List Weight List Weight List

(lb) Price (lb) Price (lb) Price (lb) Price (lb) Price (lb) Price

3/4 1-1/2 143T

1 1-1/2 - 2 2 - 3 145T

1-1/2 3 5 182T $1,173 170 $1,207 190 $1,329

5 7-1/2 184T

3 7-1/2 10 213T

5 10 15 215T

7-1/2 15 20 254T

10 20 25 256T

15 25 284T

30 284TS 200 $1,427 210 $1,470 220 $1,573 340 $1,939 350 $2,190 400 $2,272

20 30 286T

40 286TS

25 40 324T

50 324TS 230 $1,544 230 $1,524 240 $1,690 360 $2,055 370 $2,306 420 $2,320

30 50 326T

60 326TS

40 60 364T

75 364TS 240 $1,677 250 $1,796 370 $2,187 380 $2,446 430 $2,453

50 75 365T

365TS

60 100 404T

404TS 270 $2,432 400 $2,594 410 $3,144 460 $3,126

75 125 405T

405TS

100 150 444T

125 200 445T 460 $2,833 470 $3,508 520 $3,514

150 250…300 447T

200 449T


Grid Spacer Grid Spacer Grid Spacer Grid Spacer Grid Spacer Grid Spacer

3/4 1-1/2 143T

1 1-1/2 - 2 2 - 3 145T

1-1/2 3 5 182T $215 $260 $215 $260 $215 $260

2 5 7-1/2 184T

3 7-1/2 10 213T

5 10 15 215T

7-1/2 15 20 254T

10 20 25 256T

15 25 284T

30 284TS $248 $411 $248 $411 $248 $411 $248 $411

20 30 286T

40 286TS

25 40 324T

50 324TS $284 $507 $284 $507 $284 $507 $284 $507 $284 $507 $284 $507

30 50 326T

60 326TS

40 60 364T

75 364TS $405 $679 $405 $679 $405 $679 $405 $679 $405 $679

50 75 365T

365TS

60 100 404T

404TS $518 $1,069 $518 $1,069 $518 $1,069 $518 $1,069

75 125 405T

405TS

100 150 444T

125 200 445T $722 $1,089 $722 $1,089 $722 $1,089

150 250…300 447T

200 449T


Base Plate Drip Pan Options are available on the following pageSee the next page for the Hytrel Coupling Statement

2L6, 3L6 4L1 5L1 8L2 8L8 8L1

2L4, 2L5 3L4, 3L5 4L4 6L1 6L7, 8L7

4L1

10L7 12L2

1150

RPM

1750

RPM

3550

RPM

Motor

Frame

5L3 6L3 8L3 10L3

Steel Centerdrain Base, Flexible Coupling

and OSHA Guard, No Motor4L2, 4L3 5L2 6L2 10L2

12L2-15

180 $1,228 200 $1,267 210 $1,431

10L8

$215 $288 $215

12L2-154L2, 4L3, 5L3 5L2, 6L3 6L2, 8L3 10L2, 10L3

$288 $215 $288

10L7, 10L8

8L1

2L6, 3L6

1150

RPM

1750

RPM

3550

RPM

Motor

Frame

Special Coupling Adders - List Price 5L1 8L2 8L8 12L22L4, 2L5 3L4, 3L5 4L4 6L1 6L7, 8L7

1/1/20Split Case

Page 25

Weinman 1210 L SeriesBase Assembly Drip Pan Adder



Note - Drip pan base dimensions are different than the published base dimensions

Please consult the factory if a dimensional drawing is required

Motor Drip Pan

Frame

56 $587

143T-145T $587

182T-184T $587

213T-215T $587

254T-256T $652

284T-286T $652

324TS-326T $652

364TS-365T $652

404TS-405T $751

444TS-445T $751

Weinman base and frame mounted pumps with motors of frame size 365 or larger

use Hytrel sleeves in the couplings. Hytrel sleeves are not suitable for variable

speed systems and must be replaced with an all metal coupling, because of space

and torque requirements.

1/1/20Split Case

Page 26

Weinman 1210 L SeriesNSF 61 / 372 Mechanical Seal Options


Mechanical seals supplied on pumps in section 1210 are FDA Approved non-pusher type elastomer bellows seals -

Type 1 or equivalent, code B/C/CE (Y2F)

These materials are recommended for water pressures to 150 psi. Disolved solids limited to 250 PPM.

Unbalanced seals (carbon/ceramic & carbon/ni-resist) should be limited to 150 psi suction pressure to insure optimum seal life.

2L4A, 2L5, 2L6 3L4, 3L5 4L4 6L1 10L2 6L7 8L1 12L2C

3L6 4L1A, 4L1B 5L1 8L2A, 8L2B 8L7, 8L8 12L2A, 12L2B

4L2, 4L3 5L2 6L2 10L3A, 10L3B 10L7, 10L8

5L3 6L3 8L3

Type 1: Adder For Unbalanced Sleeveless Seals With Standard 416SS Seal Collar

Seal List List List List List List List List


Water to 150 psi

B/C/CE

Water to 200 psi

B/SC/SC

Water to 150 psi

B/C/CE

Water to 200 psi

B/SC/SC

Water to 150 psi

B/C/CE

Water to 200 psi

B/SC/SC

Water to 150 psi

B/C/CE

Water to 200 psi

B/SC/SC

Other seal options may be available for NSF372 only, at additional cost. Consult factory for pricing.

All prices above are list prices.

Prices mentioned above are adders only, and not actual seal prices. Consult factory for seal prices for replacement.

* design does not have seal collar

§ adder for seal collar only, does not include seal. To be added separetely to seal prices

## Sleeves included with balanced seals are not the same as sleeves of unbalanced sleeved seals

Elastomer

B = Buna-N

EP = EPDM/EPR


Service

Stationary Face Spring & Retainer

C = Carbon CE = Ceramic


1 = 18-8 Stainless


Rotating Face

Type 1B: Balanced Seals (Includes 316SS sleeves) - Required with the use of a ductile iron case ##

Y2F $2,754 $2,890 $2,995 $3,204 $3,227 n/a $5,222 n/a

Y39F $4,329 $4,883

unbalanced

Y39FY39F $4,157 $4,200 $4,200 $4,936 $4,957

unbalanced

Y39F$7,056

$6,958unbalanced

Y39F

Type 1B: Balanced Seals (Includes 416SS sleeves) - Required with the use of a ductile iron case ##

Y2F $2,695 $2,760 $2,916 $2,990 $2,990 n/a $3,980 n/a

$2,270 $2,353 n/a

Adder For Optional 316SS Seal Collar With Unbalanced Sleeved Seals (both Y2F and Y39F) §

J4 $173 $173 $510 $510 $510

Y39F $679 $771 $843 $2,145 $2,145

n/a $510 n/a

$4,952 $5,074 $5,074unbalanced

Y39F

Type 1: Unbalanced Seals for use with Shaft Sleeves, With Standard 416SS Seal Collar

Y2F $626 $626 $755 $755 $938 std* $1,127 n/a

Adder For Optional 316SS Seal Collar With Unbalanced Sleeveless Seals (both Y2F and Y39F) §

J4 $173 $173 $510 $510 $510 n/a $510 $510

Y39F $457 $509 $563 $612 $612 n/a $1,006 $1,006

Pump Models

Y2F std std std std std n/a std std

1/1/20Split Case

Page 27

Weinman...Weinman - Split Case DATE Page(s) Change / Correction 12/01/16 All Price Increase 12/16/16...

Documents

Transcript of Weinman...Weinman - Split Case DATE Page(s) Change / Correction 12/01/16 All Price Increase 12/16/16...