Waterman Valve LLC - AGRICULTURAL WATER CONTROL ......39 AC-31 Aluminum Canal Gates 40 74P-30...

AGRICULTURAL WATER CONTROL PRODUCTSPRICE LIST

EFFECTIVE FEBRUARY 1, 2019 SUPERSEDES ALL PREVIOUS PRICE LISTS

Nationwide Order Desk: (800) 331-0808

2 800-331-0808 www.WatermanUSA.com

2 TABLE OF CONTENTS

Prices subject to change without notice. Not responsible for clerical or typographical errors in published prices. Possession of price list does not constitute offer to sell. Photos shown for reference only and may not represent finished product size or configuration.

CANAL AND SLIDE GATES

3 Canal Gate Ordering Information 4 C-10 Canal Gates16 Options19 Parts22 C-20 Canal Gates33 Options35 Parts37 FC-10 Combination Canal/Drainage Gates38 SSC-31 Stainless Steel Canal Gates39 AC-31 Aluminum Canal Gates40 P-30 Pressure Gates42 C-2 Distributing Gates43 C-8 Sure Seal and C-8E Slide Ditch Gates

LINE GATES

45 H-30 and HV-30

DRAINAGE FLAP GATES

48 F-10 Cast Iron Flap Gate 51 AF-41 Aluminum Flap Gate51 SSF-41 Stainless Steel Flap Gate 52 PF-25 Cast Iron Flap Gate

RISER VALVES

54 Overflow - Red Top 57 Pasture Overflow Valves59 Overflow- Sunshine 62 Alfalfa 68 Universal Hydrants

AIR RELIEF VALVES

71 AV-150 Aluminum71 AV-150 Aluminum - Threaded Outlet72 CR-101 Continuous Acting72 CR-101-HP High Pressure Continuous Acting72 AVP-1 Plastic 73 CRP-8 Plastic73 CRP-9 Plastic

PRESSURE RELIEF VALVES

74 AA-6 74 AA-9674 AA-9

CHECK AND DRAIN VALVES

77 PC-30 77 D-34 Low Pressure Drain Valve

MISCELLANEOUS PRODUCTS

78 Dairy Flush Valves

TERMS AND INSTALLATION INSTRUCTIONS

79 Terms of Sale 82 Canal Gates Installation Instructions83 Line Gates Installation Instructions

Have an old part to match? It's easy to convert the part number on old castings to a current Waterman part number. Just remove the W and replace with 711. Example: W-0481-00-1 is now 7110481001.

3800-331-0808 www.WatermanUSA.com

3

C-10 AND C-20 CANAL GATES ORDERING GUIDE

Optional limit nut controls opening. Choose standard or tamper proof. Flat back for flush

mount to wall

Spigot options to fit corrugated, plastic pipe and concrete pipe.

Commonly used in areas with minimal overhead clearance, prevents gate stem from extending above the handwheel/op nut when in open position.

Allows handwheel to be higher than overall frame.

Variable height as required.

Can be less expensive than full height / full frame gate.

MOUNTING OPTIONS

NON-RISING STEM

RISING STEM EXTENSION

CANAL GATE SPECIALTY OPTIONS

CANAL GATE TERMINOLOGY

Frame height, select 6" increments in chart.

Select diameter.

Choose painted or galvanized frame.

GATE ORDERING GUIDE


4 C-10 RED TOP CANAL GATESC-

10 C

ANAL

GAT

ES

GATE SIZE

“H” FRAME HEIGHT MATERIAL FLAT BACK SPIGOT BACK WEIGHT

(LBS.)

6"

24"PAINTED 565.00 C10F-6-24H-PTD 594.00 C10S-6-24H-PTD

41GALVANIZED 582.00 C10F-6-24H-GALV 612.00 C10S-6-24H-GALV

























When ordering, add suffix to part number to indicate stem thread pattern:

Right Hand Thread, 3 Teeth per inch = - 3TR Right Hand Thread, 4 Teeth per inch = - 4TR Left Hand Thread, 4 Teeth per inch = - 4TL

Additional options may be added, consult options section for descriptions and pricing


5C-10 RED TOP CANAL GATESC-10 CANAL GATES




GATE SIZE


(LBS.)

8"


























123GALVANIZED 1,008.00 C10F-8-120H-GALV 1,020.00 C10S-8-120H-GALV



10 C

ANAL

GAT

ES

GATE SIZE


(LBS.)

10"

























120"PAINTED 1,039.00 C10F-10-120H-PTD 1,042.00 C10S-10-120H-PTD






7C-10 RED TOP CANAL GATESC-10 GATE OPTIONS




GATE SIZE


(LBS.)

12"






















123GALVANIZED 990.00 C10F-12-96H-GALV 1,002.00 C10S-12-96H-GALV







10 C

ANAL

GAT

ES




GATE SIZE


(LBS.)

14"






























GATE SIZE


(LBS.)

15"

















84"PAINTED 981.00 C10F-15-84H-PTD 1,002.00 C10S-15-84H-PTD










10 C

ANAL

GAT

ES




GATE SIZE


(LBS.)

16"






























GATE SIZE


(LBS.)

18"

























10 C

ANAL

GAT

ES




GATE SIZE


(LBS.)

20"




























GATE SIZE


(LBS.)

21"





















24"























10 C

ANAL

GAT

ES




GATE SIZE


(LBS.)

30"

















36"








582GALVANIZED 3,032.00 C10F-36-96H-GALV 3.273.00 C10S-36-96H-GALV










GATE SIZE


(LBS.)

42"









48"









54"100"

PAINTED 9,516.00 C10F-54-108H-PTD 9,903.00 C10S-54-108H-PTD1390

GALVANIZED 9,810.00 C10F-54-108H-GALV 10,209.00 C10S-54-108H-GALV





60"108"

PAINTED 11,393.00 C10F-60-108H-PTD 11,722.00 C10S-60-108H-PTD2005

GALVANIZED 11,745.00 C10F-60-108H-GALV 12,084.00 C10S-60-108H-GALV



72" 122"PAINTED 20,171.00 C10F-72-122H-PTD 20,473.00 C10S-72-122H-PTD



16 C-10 RED TOP CANAL GATE OPTIONSC-

10 G

ATE

OPTI

ONS

OPTIONS TO ADD TO STANDARD GATE

ADDITIONAL COST / GATE SIZE6" 8" 10" 12" 14" 15"

CIP Frame(for PIP & SCH 40 PVC)

184.3740006159

184.3740008159

216.3040010159

270.8940012159

N/A N/A

Type 4 Spigot1

(Low Head PIP)89.61

4000615393.73

40008153125.6640010153

145.2340012153

N/A 258.5340015153

Taper Setting Collar Concrete Pipe(C-10C) (for Concrete Pipe) Add to Flatback Only

63.8647806154

63.8647808154

66.9547810154

66.9547812154

79.3147814154

79.3147815154

CL-10 Square CoverFlat Square Bottom Slide N/A 78.28 84.46 90.64 97.85 99.91

Limit Nut (Std.)2

Galvanized16.48

71082073116.48

71082073116.48

71082073116.48

71082073116.48

71082073116.48

710820731

Tamper-Resistant Limit Nut 2

Galvanized 4 TPI RH (LH & 3TPI avail.)32.96

7108284232.96

7108284232.96

7108284232.96

7108284232.96

7108284232.96

71082842

Non-Rising Extension Brackets (PR) 122.0554201001

122.0554201001

122.0554201001

122.0554201001

122.0554201001

122.0554201001

Non-Rising Extension Pipe Assembled(per ft.)

26.7854201002

26.7854201002

26.7854201002

26.7854201002

26.7854201002

26.7854201002

Non-Rising Stem Adaption(CL-10 Cover Only) 123.60 123.60 123.60 123.60 123.60 123.60

Rising Stem Extension Brackets (PR) 104.0354209001

104.0354209001

104.0354209001

104.0354209001

104.0354209001

104.0354209001

Rising Stem Extension Pipe & Stem Assembled(per ft.)

31.93 31.93 31.93 31.93 31.93 31.93

Galvanized ASTM-A-123 (Add to GALV Frame Price) 412.00 412.00 412.00 412.00 412.00 412.00

Machined Flatback Frameto Fit O.D. Steel Pipe 139.05 139.05 139.05 139.05 139.05 139.05

HDPE Flange Adapter3

(for HDPE & SDR35)108.1515006100

120.5115008100

140.0815010100

153.4715012100

156.5615014100

168.9215015100

C-10 Gate Size Stem Diameter For Stem Guides Model Price

6-16" 7/8" SK-1 76.22

18-24" 1" SK-1 76.22

30-36" 1 1/8" SK-1 76.22

42-48" 1 1/2" SK-1 76.22

54-72" 2" SK-2 111.24

Notes: Special Paint and/or Special Materials - Call for Quote

1 Type 4 is designed for Low Head pipe

2 When ordering Limit Nuts, please specify Left Hand or Right Hand 710821731 3 TPI Right Hand

3 HDPE Adapters can be made to fit most pipe specifications If bronze seat required, use C-20 gate.

Non-rising extension hardware is used to place handle and stem at a consistent location.

Model C-10

STEM GUIDE ORDERING INFORMATION C-10

Stem guides also available in stainless steel, call for price.


17C-10 GATE OPTIONS

OPTIONS TO ADD TO STANDARD GATEADDITIONAL COST / GATE SIZE

16" 18" 20" 21" 24" 30"

CIP Frame(for PIP & SCH 40 PVC) N/A N/A N/A N/A N/A N/A

Type 4 Spigot1

(Low Head PIP) N/A 306.9440018153 N/A N/A N/A N/A

Taper Setting Collar Concrete Pipe (C-10C) (for Concrete Pipe) Add to Flatback Only

79.3147816154

91.6747818154

91.6747820154

91.6747821154

103.0047824154

154.5047830154

CL-10 Square CoverFlat Square Bottom Slide 117.42 170.98 N/A N/A 288.40 389.34

Limit Nut (Std.)2

Galvanized16.48

71082073121.63

71082082121.63

71082082121.63

71082082121.63

71082082132.96

710821131

Tamper-Resistant Limit Nut2


7108284238.11

7108284438.11

7108284438.11

7108284438.11

7108284443.26

71082848


135.9454202001

135.9454202001

135.9454202001

135.9454202001

147.6454203001


26.7854201002

26.7854201002

26.7854201002

26.78305000003

26.78305000003

33.99305000004

Non-Rising Stem Adaption(CL-10 Cover Only) 123.60 123.60 N/A 123.60 123.60 123.60


123.6054210001

123.6054210001

123.6054210001

123.6054210001

143.1754211001

Rising Stem Extension Pipe & Stem Assem-bled(per ft.)

31.93 31.93 31.93 36.05 36.05 36.05

Galvanized ASTM-A-123(Add to GALV Frame Price) 412.00 412.00 412.00 412.00 412.00 566.50

Machined Flatback Frame to Fit O.D. Steel Pipe 139.05 139.05 139.05 169.95 169.95 195.70


(for HDPE & SDR35)189.5215016100

210.1215018100

324.4515020100 N/A 475.86

15024100604.61

150301003

Type II Lift w/ Thrust Bearings(for easier operation) N/A N/A N/A N/A N/A N/A





FRAME TYPE GUIDE

F = Flatwall/Flatback mounting

SB = Spigot back for spiral corrugated pipe

CIP = Solvent cemeting back for PIP + SCH 40 pipe

C = Galvanized steel tapered collar for concrete pipe

Type 4 = Mounting in plastic pipe with 2-part epoxy

C-10 RED TOP® GATE OPTIONS


18

OPTIONS TO ADD TO STANDARD GATEADDITIONAL COST / GATE SIZE

36" 42" 48" 54" 60" 72"

CIP Frame(for PIP & SCH 40 PVC) N/A N/A N/A N/A N/A N/A

Type 4 Spigot1

(Low Head PIP) N/A N/A N/A N/A N/A N/A

Taper Setting Collar Concrete Pipe (C-10C) (for Concrete Pipe) Add to Flatback Only

200.8547836154

293.5547842154

359.4747848154 N/A N/A N/A

CL-10 Square CoverFlat Square Bottom Slide 492.34 806.49 N/A N/A N/A N/A

Limit Nut (Std.)2

Galvanized32.96

71082113138.11

71082172138.11

71082172164.89

1082191164.89

1082191164.89

10821911



7108284854.59

71082841254.59

710828412 72.10 72.10 72.10


165.7854204001

165.7854204001

165.7854204001

165.7854204001 N/A


33.99305000004

43.26305000006 46.35 61.80 61.80 61.80

Non-Rising Stem Adaption(CL-10 Cover Only) 123.60 N/A N/A N/A N/A N/A


220.4254212001

220.4254212001 N/A N/A N/A

Rising Stem Extension Pipe & Stem Assem-bled(per ft.)

36.05 51.50 46.35 N/A N/A N/A

Galvanized ASTM-A-123(Add to GALV Frame Price) 849.75 1,158.75 1,673.75 2,420.50 3,347.50 4,094.25

Machined Flatback Frame to Fit O.D. Steel Pipe 216.30 272.95 309.00 N/A N/A N/A


(for HDPE & SDR35)726.1515036100

875.5015042100

973.3515048100

CALL FOR QUOTE

CALL FOR QUOTE

CALL FOR QUOTE

Type II Lift w/ Thrust Bearings(for easier operation) N/A N/A 497.00

48884541497.0048884541

497.0048884541 N/A






C-10 Waterman C-10 canal gates are built-to-last, offering a typical field life exceeding 40 years. They offer superior construction and performance to “look alike” products across a wide range of applications. They are designed for installations with pressure in the seating direction.

Waterman advantages include:• Superior sealing with 2-bolt wedges standard (competitors use only one bolt).• Thicker, heavier material for rails, assures reliable performance and prevents deflection.• Option of either painted or galvanized frame for cost-savings.• Compatibility with existing installations.• Wide choice of mounting options and pipe adapters.• Option for rising stem extensions can reduce frame size while still placing handwheel at correct height, ideal for applications where budget is a concern.

C-10

GAT

E OP

TION

S

Model C-10 Flat plate square bottom cover


19C-10 GATE PARTS

PARTGATE SIZE

6" 8" 10" 12" 14"

A Frame Ring – Flat Back 138.0240006150

141.1140008150

157.5940010150

164.8040012150

202.9140014150

B Frame Ring – Spigot Back 143.1740006152

154.5040008152

162.7440010152

172.0140012152

207.0340014152

C Cover (Slide) 104.0341006150

121.5441008150

148.3241010150

199.8241012150

214.2441014150

D Left Wedge 26.7846206150

26.7846206150

26.7846206150

26.7846206150

26.7846206150

E Right Wedge 26.7846306150

26.7846306150

26.7846306150

26.7846306150

26.7846306150

Top Rail – Painted 43.2347606024

42.2347608024

53.5647610024

53.5647612024

58.7147614024

Top Rail – Galvanized 52.2347606025

52.2347608025

52.2347610025

52.2347612025

52.2347614025

Left Guide Rails – Painted(Price per Foot) 46.67 46.67 46.67 46.67 46.67

Right Guide Rails – Painted(Price per Foot) 46.67 46.67 46.67 46.67 46.67

Left Guide Rails – Galvanized(Price per Foot) 48.00 48.00 48.00 48.00 48.00

Right Guide Rails – Galva-nized(Price per Foot)

48.00 48.00 48.00 48.00 48.00

F Thrust Collar / Lift Collar 18.5448000005

18.5448000005

18.5448000005

18.5448000005

18.5448000005

G Collar Bolts w/ Nut (ea.) 5.152042

5.152042

5.152042

5.152042

5.152042

H Bronze Lift Nut 51.50 51.50 51.50 51.50 51.50

3 TPI - Right Hand 4840523111 484052311 484052311 484052311 484052311

4 TPI - Right Hand 484052312 484052312 484052312 484052312 484052312

4 TPI - Left Hand 484052313 484052313 484052313 484052313 484052313

I Handwheel 62.8349510093

62.8349510093

62.8349510093

62.8349510093

62.8349510093

J Wedge Bolts (ea.) 14.427600503528

14.427600503528

14.427600503528

14.427600503528

14.427600503528

K Assembly Bolts (ea.) 4.1280800100

4.1280800100

4.1280800100

4.1280800100

4.1280800100

UHMW Washers (ea.) 4.1271024591

4.1271024591

4.1271024591

4.1271024591

4.1271024591

C-10 RED TOP® GATE PARTS

A

G H I J K

B C D E F


20

PARTGATE SIZE

15" 16" 18" 20" 21" 24"

A Frame Ring – Flat Back 206.0040015150

278.1040016150

305.9140018150

457.3240020150

489.2540021150

598.4340024150

B Frame Ring – Spigot Back 212.1840015152

287.3740016152

314.1540018152

467.6240020152

505.7340021152

620.0640024152

C Cover (Slide) 219.3941015150

287.3741016150

370.8041018150

473.8041020150

509.8541021150

637.5741024150

D Left Wedge 26.7846206150

30.9046216150

30.9046216150

30.9046216150

30.9046216150

30.9046216150


30.9046316150

30.9046316150

30.9046316150

30.9046316150

30.9046316150

Top Rail – Painted 58.7147615024

67.9847616024

70.0447618024

71.0747620024

78.2847621024

89.6147624024


77.9847616025

80.0447618025

81.0747620025

88.2847621025

99.6147624025

Left Guide Rails – Painted(Price per Foot) 46.67 46.67 46.67 46.67 46.67 46.67

Right Guide Rails – Painted(Price per Foot) 46.67 46.67 46.67 46.67 46.67 46.67

Left Guide Rails – Galvanized(Price per Foot) 48.00 48.00 48.00 48.00 48.00 48.00

Right Guide Rails – Galva-nized(Price per Foot)

48.00 48.00 48.00 48.00 48.00 48.00


18.5448000005

20.6048000010

20.6048000010

20.6048000010

20.6048000010


5.152042

5.152042

5.152042

5.152042

5.152042

H Bronze Lift Nut 51.50 51.50 72.10 72.10 72.10 72.10

3 TPI - Right Hand 484052311 484052311 484103311 484103311 484103311 484103311

4 TPI - Right Hand 484052312 484052312 484103312 484103312 484103312 484103312

4 TPI - Left Hand 484052313 484052313 484103313 484103313 484103313 484103313


62.8349510093

81.3749512153

81.3749512153

81.3749512153

81.3749512153

J Wedge Bolts (ea.) 14.427600503528

14.4280001001

14.4280001001

14.4280001001

14.4280001001

14.4280001001


4.1280800100

4.1280800100

4.1280800100

4.1280800100

4.1280800100


4.1271024591

4.1271024594

4.1271024594

4.1271024594

4.1271024594

C-10 RED TOP® GATE PARTSC-

10 G

ATE

PART

S


21C-10 GATE PARTS

PARTGATE SIZE

30" 36" 42" 48" 54" 60" 72"

A Frame Ring – Flat Back 1,094.8940030150

1,164.9340036150

2,476.1240042150

2,802.6340048150

5,083.0540054150

5,496.0840060150

6,547.7140072150

B Frame Ring – Spigot Back 1,129.9140030152

1,208.1940036152

2,563.6740042152

2,903.5740048152

5,224.1640054152

5,691.7840060152

8,499.5640072152

C Cover (Slide) 1,084.5941030150

1,394.6541036150

2,570.8841042150

3,354.7141048150

6,162.4941054150

7,379.9541060150

7,982.5041072150

D Left Wedge 64.8946230150

64.8946230150

64.8946230150

64.8946230150

135.9646254150

135.9646254150

146.2646272150


64.8946330150

64.8946330150

64.8946330150

135.9646354150

135.9646354150

146.2646372150

F Top Rail – Painted 111.2447630024

129.7847636024

216.3047642024

246.1747648024

253.3847654024

278.1047660024

335.7847672024


139.7847636025

226.3047642025

256.1747648025

263.3847654025

288.1047660025

345.7847672025

Left Guide Rails – Painted(Price per Foot) 53.33 53.33 63.33 63.33 98.33 102.33 118.33

Right Guide Rails – Painted(Price per Foot) 53.33 53.33 63.33 63.33 98.33 102.33 118.33

Left Guide Rails – Galvanized(Price per Foot) 56.00 56.00 66.00 66.00 101.00 105.00 121.00

Right Guide Rails – Galvanized(Price per Foot) 56.00 56.00 66.00 66.00 101.00 105.00 121.00


28.8448000015

74.1648000020

105.0648000026

105.0648000026

105.0648000026

105.0648000026


5.152049

6.182063

6.182063

6.182063

6.182063 N/A

H Bronze Lift Nut 79.31 79.31 189.52 189.52 189.52 189.52 N/A

3 TPI - Right Hand 484154311 484154311

4 TPI - Right Hand 484154312 484154312 4842054161 4842054161 4842054161 4842054161

4 TPI - Left Hand 484154313 484154313


92.7049515181

160.6849518250

197.7649524243

406.8549530243

406.8549530243 N/A

J Wedge Bolts (ea.) 14.4280001002

14.422069

17.512011

17.512011

17.512011

17.512011

17.512011


6.1880801100

6.1880801100

6.1880801100

6.1880801100

6.1880801100

6.1880801100


4.1271024593

4.1271024594

Bearing (ea.) 77.2584501037

77.2584501037

77.2584501037

77.2584501037


A

G H I J K

B C D E F


22

Model C-20

C-20Designed for applications with either seating or unseating heads, Waterman C-20 canal gates are built-to-last, offering a typical field life exceeding 40 years. They offer superior construction and performance to “look alike” products across a wide range of applications.

Waterman advantages include:• Superior sealing with 2-bolt wedges standard (competitors use only one bolt).• Thicker, heavier material for rails, assures reliable performance and prevents deflection.• Option of either painted or galvanized frame for cost-savings.• Compatibility with existing installations.• Wide choice of mounting options and pipe adapters.• Option for rising stem extensions can reduce frame size while still placing handwheel at correct height, ideal for applications where budget is a concern.• Available with brass seats.

C-20 RED TOP® CANAL GATESC-

20 C

ANAL

GAT

ES

GATE SIZE


(LBS.)

8"




74GALVANIZED 952.00 C20F-8-30H-GALV 992,00 C20S-8-30H-GALV
























Right Hand Thread, 3 Teeth per inch = - 3TR Right Hand Thread, 4 Teeth per inch = - 4TR



23C-20 CANAL GATES

GATE SIZE


(LBS.)

10"






























C-20 RED TOP® CANAL GATES


24 C-20 RED TOP® CANAL GATESC-

20 C

ANAL

GAT

ES

GATE SIZE


(LBS.)






























Model C-20




25C-20 CANAL GATES


GATE SIZE


(LBS.)

14"






























20 C

ANAL

GAT

ES

GATE SIZE


(LBS.)

15"



36"PAINTED 1,278.00 C20F-15-36H-PTD 1,313,00 C20S-15-36H-PTD


























27C-20 CANAL GATES


GATE SIZE


(LBS.)

16"






























20 C

ANAL

GAT

ES

GATE SIZE


(LBS.)

18"



























29C-20 CANAL GATES


GATE SIZE


(LBS.)

20"





















21"


























20 C

ANAL

GAT

ES

GATE SIZE


(LBS.)

24"























31C-20 CANAL GATES


GATE SIZE


(LBS.)

30"















36"















32

Model C-20



C-20 RED TOP® CANAL GATESC-

20 C

ANAL

GAT

ES

GATE SIZE


(LBS.)

42"

84"PAINTED 8,893.00 C20F-42-84H-PTD 9.943.00 C20S-42-84H-PTD








48"













33C-20 GATE OPTIONS

OPTIONADDITIONAL COST / GATE SIZE

8" 10" 12" 14" 15" 16" 18"

Bronze Seats 486.16 548.99 659.20 791.04 869.32 900.22 956.87


93.7354201001

125.6654201001

145.2354201001

122.0554201001

122.0554201001

147.6454203001

Non-Rising Extension Pipe Installed(per ft.)

26.78305000003

26.78305000003

26.78305000003

26.78305000003

26.78305000003

26.78305000003

33.99305000004


104.0354209001

104.0354209001

104.0354209001

104.0354209001

104.0354209001

143.1754211001

Rising Stem Pipe & Stem Installed(per ft.) 36.05 36.05 36.05 36.05 36.05 36.05 36.05

Machining Back for Flange Frame 61.80 61.80 61.80 61.80 82.40 82.40 103.00

Machining for OD Pipe 61.80 61.80 61.80 61.80 82.40 82.40 103.00

125 LB. Flange Drilling150 LB. Drilling add $75.00 92.70 92.70 92.70 92.70 92.70 92.70 92.70

Entire Frame ASTM-A-123 Galvanized(Add to GALV Frame Price) 412.00 412.00 412.00 412.00 412.00 412.00 412.00

Limit Nut (Std.)1

Galvanized16.48

71082073116.48

71082073116.48

71082073116.48

71082073116.48

71082073116.48

71082073132.96

710821131


Galvanized 3 TPI RH (Others avail.)

30.90 30.90 30.90 30.90 30.90 30.90 41.20


(for HDPE & SDR35) 120.51 140.08 153.47 156.56 168.92 189.52 210.12


1 When ordering Limit Nuts, please specify Left Hand or Right Hand

2 HDPE Adapters can be made to fit most pipe specifications

C-20 Gate Size Stem Diameter For Stem Guides Model Price

8-16" 7/8" SK-1 76.22

18-24" 1 1/8" SK-1 76.22

30-48" 1 1/2" SK-2 111.24


Model C-20

STEM GUIDE ORDERING INFORMATION C-20


34 C-20 RED TOP® GATE OPTIONS

OPTIONADDITIONAL COST/ GATE SIZE

20" 21" 24" 30" 36" 42" 48"

Bronze Seats 1,119.61 1,290.59 1,527.49 2,206.26 2,772.76 4,221.97 4,221.97


147.6454203001

165.7854203001

165.7854203001

165.7854203001

165.7854204001

165.7854204001

Non-Rising Extension Pipe Assem-bled(per ft.)

33.99305000004

33.99305000004

33.99305000004

43.26305000006

43.26305000006

43.26305000006

43.26305000006


143.1754211001

143.1754211001

143.1754211001

143.1754211001

143.1754211001

143.1754211001

Rising Stem Extension Pipe & Stem Assembled(per ft.)

36.05 38.11 38.11 49.44 49.44 49.44 49.44

Machining Back for Flange Frame 103.00 162.74 162.74 223.51 223.51 318.27 367.00

Machining for OD Pipe 103.00 179.22 179.22 223.51 223.51 318.27 367.00

125 LB. Flange Drilling150 LB. Drilling add $75.00 92.70 N/A 97.85 97.85 97.85 97.85 142.00

Entire Frame ASTM-A-123 Galvanized(Add to GALV Frame Price) 412.00 412.00 558.26 811.64 1,066.05 1,352.59 1,759.00

Limit Nut (Std.)1

Galvanized32.96

71082113132.96

71082113132.96

71082113138.11

71082172138.11

71082172138.11

71082172138.11

710821721


Galvanized 3 TPI RH (Others avail.)

41.20 43.26 43.26 43.26 43.26 43.26 43.26

Type II Lift w/ Thrust Bearings(for easier operation) N/A N/A N/A 497.00

48884541497.0048884541

497.0048884541

497.0048884541


(for HDPE & SDR35) 324.45 N/A 475.86 604.61 726.15 875.50 973.35


1 When ordering Limit Nuts, please specify Left Hand or Right Hand

2 HDPE Adapters can be made to fit most pipe specifications

C-20

GAT

E OP

TION

S


35C-20 GATE PARTS


A

H I J K L

B C D E F

G

PARTGATE SIZE

8” 10” 12” 14” 15” 16” 18”

A Frame Ring - Flat Back 179.2240008162

209.0940010162

248.2340012162

301.7940014162

309.0040015162

357.4140016162

423.3340018162

B Frame Ring - Spigot Back 187.4640008164

219.3940010164

259.5640012164

315.1840014164

324.4540015164

374.9240016164

445.9940018164

C Cover (Slide) 153.4741008162

178.1941010162

253.3841012162

346.0841014162

370.8041015162

383.1641016162

449.0841018162

D Arch 53.5644008162

58.7144010162

58.7144012162

82.4044014162

107.1244015162

135.9644016162

139.0544018162

E Left Wedge 36.0546201162

36.0546201162

36.0546201162

36.0546201162

36.0546201162

36.0546201162

71.0746202162

F Right Wedge 36.0546301162

36.0546301162

36.0546301162

36.0546301162

36.0546301162

36.0546301162

71.0746302162

Top Rail - Painted 47.3847608040

47.3847610040

55.6247612040

60.7747614040

60.7747615040

67.9847616040

88.5847618040

Top Rail - Galvanized 57.3847608041

57.3847610041

65.6247612041

70.7747614041

70.7747615041

77.9847616041

98.5847618041

Left Guide Rails - Painted (Price per Foot) 46.67 46.67 46.67 46.67 46.67 46.67 46.67

Right Guide Rails - Painted (Price per Foot) 46.67 46.67 46.67 46.67 46.67 46.67 46.67

Left Guide Rails - Galvanized (Price per Foot) 48.00 48.00 48.00 48.00 48.00 48.00 48.00

Right Guide Rails - Galvanized (Price per Foot) 48.00 48.00 48.00 48.00 48.00 48.00 48.00

G Thrust Collar / Lift Collar 18.5448000005

18.5448000005

18.5448000005

18.5448000005

18.5448000005

18.5448000005

24.8448000015

H Collar Bolts w/ Nut (ea.) 5.152042

5.152042

5.152042

5.152042

5.152042

5.152049

5.152049

I Bronze Lift Nut 51.50 51.50 51.50 51.50 51.50 51.50 79.31

3 TPI - Right Hand 484052311 484052311 484052311 484052311 484052311 484052311 484154311

4 TPI - Right Hand 484052312 484052312 484052312 484052312 484052312 484052312 484154312

4 TPI - Left Hand 484052313 484052313 484052313 484052313 484052313 484052313 484154313

J Handwheel 75.1949512131

75.1949512131

75.1949512131

75.1949512131

75.1949512131

75.1949512131

92.7049515181

Arch Bolt 13.391176

13.391176

13.391176

13.391176

13.391176

13.391176

13.391176

Screw Bolt 5.152043

5.152043

5.152043

5.152043

5.152043

13.391176

13.392051

K Wedge Bolts (ea.) 13.391176

13.391176

13.391176

13.391176

13.391176

13.391176

13.392054

L Frame Bolts (ea.) 5.152041

5.152041

5.152041

5.152041

5.152041

5.152049

5.152049


4.1271024591

4.1271024591

4.1271024591

4.1271024591

4.1271024591

4.1271024593


36 C-20 RED TOP® GATE PARTSC-

20 G

ATE

PART

S

A

H I J K L

B C D E F

G

PARTGATE SIZE

20” 21” 24” 30” 36” 42” 48”

A Frame Ring - Flat Back 535.6040020162

542.8140021162

661.2640024162

1,151.5440030162

1,475.9940036162

3,270.2540042162

3,737.0040048162

B Frame Ring - Spigot Back 561.3540020164

570.6240021164

694.2240024164

1,207.1640030164

1,936.4040036164

3,460.8040042164

3,955.0040048164

C Cover (Slide) 548.9941020162

556.2041021162

697.3141024162

1,249.3941030162

2,035.2841036162

3,424.7541042162

3,914.0041048162

D Arch 219.3944020162

230.7244021162

263.6844024162

473.8044030162

760.1444036162

798.2544042162

912.5644048162

E Left Wedge 71.0746202162

71.0746202162

79.3146203162

79.3146203162

84.4646204162

90.6446205162

90.6446205162

F Right Wedge 71.0746302162

71.0746302162

79.3146303162

79.3146303162

84.8646304162

90.6446305162

90.6446305162

Top Rail - Painted 89.6147620040

90.6447621040

96.8247624040

123.6047630040

150.3847636040

182.3147642040

208.0047648040

Top Rail - Galvanized 99.6147620041

100.6447621041

106.8247624041

133.6047630041

160.3847636041

192.3147642041

220.0047648041

Left Guide Rails - Painted (Price per Foot) 46.67 46.67 46.67 53.33 53.33 63.33 63.33

Right Guide Rails - Painted (Price per Foot) 46.67 46.67 46.6 53.33 53.33 63.33 63.33

Left Guide Rails - Galvanized (Price per Foot) 48.00 48.00 48.00 56.00 56.00 66.00 66.00

Right Guide Rails - Galvanized (Price per Foot) 48.00 48.00 48.00 56.00 56.00 66.00 66.00

G Thrust Collar / Lift Collar 24.8448000015

24.8448000015

24.8448000015

74.1648000020

74.1648000020

105.0648000030

105.0648000030

H Collar Bolts w/ Nut (ea.) 5.152049

5.152049

5.152049

6.182390

6.182390

6.182390

6.182390

I Bronze Lift Nut 79.31 79.31 79.31 189.52 189.52 189.52 189.52

3 TPI - Right Hand 484154311 484154311 484154311

4 TPI - Right Hand 484154312 484154312 484154312 4842054161 4842054161 4842054161 4842054161

4 TPI - Left Hand 484154313 484154313 484154313

J Handwheel 92.7049515181

92.7049515181

92.7049515181

160.6849518250

160.6849518250

197.7649524243

197.7649524243

Arch Bolt 13.391176

13.392370

13.392370

15.451853

15.452074

16.482075

16.482075

Screw Bolt 13.392051

13.392051

13.392064

16.482073

16.48 2073

16.482073

16.482073

K Wedge Bolts (ea.) 13.392054

13.392054

13.392054

14.422069

14.422069

17.512011

17.512011

L Frame Bolts (ea.) 5.152049

5.152049

5.152049

5.152049

5.152049

6.182063

6.182063


4.1271024593

4.1271024593

4.1271024594

4.1271024594 N/A N/A


37FC-10 COM

BO GATES

Notes: 1 Price includes: Self-Contained Frame, Brass Lift Nut, Handwheel Lift, Galvanized Fasteners and Lift Arms, and Standard Paint

See Model F-10 Parts List for special links, bolts, and bushings

See Model C-10 Parts List for Anchor Bolts

GATE SIZE “H” FRAME HEIGHT (Minimum) WEIGHT (LBS.) MATERIAL FLAT BACK1 SPIGOT BACK1 PRICE PER ADD’L FOOT

16" 48" 190

PAINT 2,726.00709216048

2,650.00709416048 45.00

GALV 2,860.00709216049

2,800.00709416049 48.00

10 LBS.

18" 48" 220

PAINT 2,686.00709218048

2,688.00709418048 59.00

GALV 2,928.00709218049

2,938.00709418049 63.00

11 LBS.

24" 60" 303

PAINT 3,649.00709224060

3,650.00709424060 59.00

GALV 3,834.00709224061

3,850.00709424061 63.00

11 LBS.

30" 72" 65

PAINT 5,088.00709230072

5,210.00709430072 75.00

GALV 5,298.00709230073

5,410.00709430073 79.00

18 LBS.

36" 84" 655

PAINT 7,454.00709236084

7,675.00709436084 75.00

GALV 7,754.00709236085

7,825.00709436085 79.00

21 LBS.

42" 96" 885

PAINT 12,760.00709242096

13,080.00709442096 99.00

GALV 13,260.00709242097

13,330.00709442097 105.00

30 LBS.

48" 120" 1,150

PAINT 18,400.00709248120

18,215.00709448120 99.00

GALV 19,150.00709248121

19,215.00709448121 105.00

30 LBS.

60" 144" 2,929

PAINT 35,000.00709260144

35,475.00709460144 139.00

GALV 36,500.00709260145

36,675.00709460145 147.00

36 LBS.

FC-10 COMBINATION CANAL & DRAINAGE GATE

FC-10The FC-10 combines a C-10 canal gate and a F-10 drainage flap gate in a single unit. It allows drainage outflow when the unit is closed. When opened, water can backflow into the canal or pipe. See C-10 ordering details for options.

FC-10


38 SSC-31 GATESS

C-31

STA

INLE

SS G

ATES

GATE SIZE

“H” FRAME HEIGHT (Minimum)

MAXIMUM HEAD (Feet)

LIFT FLAT BACK SPIGOT BACK

FLANGE BACK

ADD’L RAIL (Per Foot)

STEM COVER (Option)

12" 27" 20' Type 1(s)-10 2,907.00 2,689.00 2,965.00 147.00 184.00

15" 32" 20' Type 1(s)-10 3,104.00 2,884.00 3,174.00 149.00 259.00

18" 36" 20' Type 1(m)-15 3,279.00 3,049.00 3,359.00 164.00 287.00

24" 46" 20' Type 2SN-15 4,135.00 3,679.00 4,307.00 165.00 302.00

30" 59" 20' Type 2N-24 4,934.00 4,452.00 5,175.00 177.00 372.00

36" 68" 20' 3R4-2:1 5,442.00 4,940.00 5,782.00 179.00 394.00

42" 77" 20' 3R4-2:1 6,005.00 5,315.00 6,680.00 179.00 415.00

48" 83" 20' 3R4-2:1 6,965.00 6,239.00 7,779.00 212.00 437.00

Notes: SSC-31 Canal Gates include Self-Contained Frame, Stem, and Lift

Gate material is 304 stainless, 316 stainless optional - Call for Quote

Specify Corrugated Metal, Concrete, PVC type, or HDPE when ordering adapter - Interior pipe diameter required

Flange Back is compatible with ANSI 125#

SSC-31 SERIES STAINLESS STEEL CANAL GATES – CIRCULAR OPENING

Built for Superior Performance• Stainless steel major components for optimum corrosion resistance• Best-in-class design and construction • Outstanding longevity for reduced maintenance • Environmentally friendly• Computer analyzed for stress and deflection using finite element analysis• Maximum seat head 20’, maximum unseating head 10’

Waterman Exclusive Benefits• Tight closure with tapered wedge seating • Low-effort, low friction opening• Nearly drip-tight performance

Materials and Specifications• Rugged and easily replaceable J-bulb seal• UHMW polyethylene guide inserts• 304 Stainless steel construction, 316 stainless steel optional• Stainless steel stem

NEW PRODUCT

Lower Head ratings may be available - Call for Quote

Special diameters available

T304SS Anchor Bolts available

Custom sizes available on request


39

Notes: AC-31 Canal Gates include Self-Contained Frame, Stem, and Lift

Specify Corrugated Metal, Concrete, PVC type, or HDPE when ordering adapter - Interior pipe diameter required.

Lower Head ratings may be available - Call for Quote

Special diameters available

T304SS Anchor Bolts available

Flange Back is compatible with ANSI 125

Adaptable for motor operators

GATE SIZE

“H” FRAME HEIGHT(Minimum)

MAXIMUM SEATING/UNSEATING

HEAD(Feet)

LIFT FLAT BACK

SPIGOT BACK

FLANGE BACK

125# ANSI

ADD’L RAIL

(Per Foot)

NON-RISING STEM(Option)

STEM COVER(Option)

8" 21" 30'/20' Type 1(m)-12 2,855.00 2,645.00 2,880.00 147.00 310.00 177.00

10" 24" 30'/20' Type 1(m)-12 2,882.00 2,665.00 2,919.00 147.00 312.00 180.00

12" 27" 30'/20' Type 1(m)-12 2,907.00 2,689.00 2,965.00 147.00 314.00 184.00

14" 30" 30'/20' Type 1(m)-12 2,937.00 2,715.00 3,002.00 149.00 430.00 187.00

15" 32" 30'/20' Type 1(m)-12 3,104.00 2,884.00 3,174.00 149.00 432.00 259.00

16" 34" 30'/20' Type 1(m)-12 3,150.00 2,927.00 3,232.00 149.00 434.00 260.00

18" 36" 30'/20' Type 2SN-12 3,279.00 3,049.00 3,359.00 164.00 530.00 287.00

20" 40" 30'/20' Type 2SN-15 3,549.00 3,152.00 3,647.00 165.00 770.00 292.00

21" 42" 30'/20' Type 2SN-15 3,569.00 3170.00 3,650.00 165.00 774.00 295.00

24" 46" 30'/20' Type 2-24 4,135.00 3,679.00 4,307.00 165.00 872.00 302.00

30" 59" 30'/20' 3R4-2:1 4,934.00 4,452.00 5,175.00 177.00 969.00 372.00

36" 68" 30'/20' 3R4-2:1 5,442.00 4,940.00 5,782.00 179.00 1,074.00 394.00

42" 77" 30'/20' 3R4-2:1 6,005.00 5,315.00 6,680.00 179.00 1,187.00 415.00

48" 87" 15'/15' 3R4-2:1 6,965.00 6,239.00 7,779.00 212.00 1,222.00 437.00

54" 95" 15'/15' 3R4-2:1 7,817.00 6,874.00 8,685.00 214.00 1,284.00 529.00

60" 108" 15'/15' 3R5-4:1 9,390.00 8,390.00 10,425.00 214.00 1,472.00 520.00

66" 117" 10'/10' 3R5-4:1 10,264.00 9,332.00 11,657.00 224.00 1,489.00 542.00

72" 126" 10'/10' 3R5-4:1 11,530.00 10,474.00 13,670.00 224.00 2,035.00 634.00

84" 147" 10'/10' 3R7-12:1 14,937.00 13,370.00 17,192.00 262.00 2,380.00 810.00

AC-31-F AC-31-Type 6 for HDPE

AC-31 ALUMINUM CANAL GATEAC-31 ALUM

INUM GATES


40P-

30 P

RESS

URE

GATE

S

Notes: 1 The P-30-C includes a galvanized sheet metal collar for installation into concrete pipe

6" through 14" valves come with iron rails - 16" and above come standard with stainless steel rail unless otherwise noted

Specify type and size of pipe when ordering adaption

304ss Stems are available standard

P-30 PRESSURE GATE

GATE SIZE

P-30-1 FLATBACK

P-30FF FLANGEBACK

P-30-C FLATBACK

W/ TAPER SETTING COLLAR1

WT. (LBS.)

IRON SEATS

BRONZE SEATS

WT. (LBS.)

IRON SEATS

BRONZE SEATS

WT. (LBS.)

IRON SEATS

BRONZE SEATS

6" 105 1,455.0013406001

1,793.0013406002 155 1,663.00

135060012,001.00

13506002 115 1,519.0013406010

1,857.0013406020

8" 120 1,715.0013408001

2,147.0013408002 170 1,997.00

135080012,429.00

13508002 130 1,779.0013408010

2,211.0013408020

10" 165 2,293.0013410001

2,745.0013410002 215 2,560.00

135100013,012.00

13510002 175 2,360.0013410010

2,812.0013410020

12" 185 2,513.0013412001

2,986.0013412002 235 2,808.00

135120013,281.00

13512002 195 2,580.0013412010

3,053.0013412020

14" 295 2,793.0013414001

3,371.0013414002 345 3,173.00

135140013,751.00

13514002 305 2,873.0013414010

3,451.0013414020

16" 400 2,987.0013416001

3,579.0013416002 450 3,445.00

135160014,037.00

13516002 410 3,067.0013416010

3,659.0013416020

18" 475 3,320.0013418001

4,097.0013418002 525 3,755.00

135180014,532.00

13518002 485 3,412.0013418010

4,189.0013418020

20" 525 3,603.0013420001

4,566.0013420002 575 4,168.00

135200015,131.00

13520002 535 3,695.0013420010

4,658.0013420020

24" 590 5,128.0013424001

6,153.0013424002 640 5,643.00

135240016,668.00

13524002 600 5,220.0013424010

6,245.0013424020

PRESSURE SLIDE GATES–P-30 "RED TOP" SERIES

Used for medium duty water control in small reservoirs, distribution boxes, ponding areas and pumping stations. Not for use with continuous throttling. Holds pressure in both directions. Center-point, wedge-action closure. Typically mounted to head walls or pipe stands. Flange back models (P-30-FF) for direct installation on pipe flanges with 125# ANSI straddle center drilling standard. Size range: 6" to 24".

KEY FEATURES: • Guide rails on 6" -14" are cast iron. Guide rails on 16" and larger are stainless steel.

• Precision machined iron secting surface (bronze optional).

• For 60 foot seating (face) pressure and 10 foot unseating (back) pressure

• Non-Rising bronze stem standard. Sizes up to 14" have tee-handle, larger sizes have hand wheel.P-30


41P-30 GATE PARTS

P-30 PARTS

PARTGATE SIZE

6" 8" 10" 12" 14" 16" 18" 20" 24"

Flangeback Frame - Iron Seats

422.3040006134

432.6040008134

496.4640010134

580.9240012134

852.0040014134

1,163.9040016134

1,262.7840018134

1,442.0040020134

2,044.5540024134

Flange back Frame - Bronze Seats

297.6740206134

682.8940208134

777.6540210134

868.2940212134

1,244.2440214134

1,375.0540216134

1,622.2540218134

2,060.0040220134

2,552.3440224134

Headpiece (Yoke) N/A N/A N/A N/A N/A 154.5047616134

244.1147618134

348.1447620134

362.5647624134

Cover - Iron Seats 189.5241006050

200.8541008050

206.0041010050

211.1541012050

222.4841014050

235.8741016050

314.1541018050

568.5641020050

896.1041024050

Cover - Bronze Seats 287.3741006051

304.8841408051

307.9741410051

342.9941412051

496.4641414051

621.0941416051

765.2941418051

1,259.6941420051

1,906.5341424051

Arch 45.3210406162

51.5071101920002

69.0171102000002

79.8271102060002

90.6471102120002

167.8971102180002

191.5871102250002

256.0071102280002

414.0071111010002

Brass Screw w/ Head Extension Bracket

118.4542406134

119.4842408134

123.6042410134

128.7542412134

139.0542414134

185.4042416134

199.8242418134

279.1342420134

338.8742424134

Brass Screw Nut (Thrust Nut)

38.1142106103

38.1142106102

38.1142106102

38.1142106102

38.1142106102

59.7442116102

59.7442116102

99.8142120102

125.6642124102

Screw Head w/ Pin 20.6042306134

20.6042306134

20.6042306134

20.6042306134

20.6042306134

26.78103588

26.78103588

30.9042320134

134.9342324134

Left Rail - Iron 27.8147406134

27.8147408134

27.8147410134

32.9647412134

56.6547414134 N/A N/A N/A N/A

Right Rail - Iron 27.8147506134

27.8147508134

27.8147510134

32.9647512134

56.6547514134 N/A N/A N/A N/A

Left Rail - Steel N/A N/A N/A N/A N/A 54.5947416234

61.8047418234

77.2547420234

99.9147424234

Right Rail - Steel N/A N/A N/A N/A N/A 54.5947516234

61.8047518234

77.2547520234

99.9147524234

Right Rail - Stainless Steel N/A N/A N/A N/A N/A 81.37

47416334101.9747418334

119.4847420334

157.5947424334

Right Rail - Stainless Steel N/A N/A N/A N/A N/A 81.37

47516334101.9747518334

119.4847520334

157.5947524334

Thrust Collar 39.1448006134

39.1448006134

39.1448006134

39.1448006134

39.1448006134

49.4448014134

49.4448014134

49.4448020134

59.7448024134

Collar Bolts 4.122262

4.122262

4.122262

4.122262

5.152300

5.152300

5.152300

7.212306

7.212306

Handwheel 62.8349512061

62.8349512061

62.8349512061

62.8349512061

62.8349512061

64.8949512076

84.4649515076

84.4649515088

221.4549518126

Assembly Bolts (ea.)

4.121235

4.121235

4.121235

4.121235

4.121235

6.181231

6.181231

6.181231

6.181231

Set Screws (ea.)

3.092860

3.092860

3.092860

3.092860

3.092860

3.092860

3.092860

3.092860

3.092860


42C-

2 GA

LVAN

IZED

GAT

ES

Notes: Pipe ID must be specified for all C-2 orders

C-2 GALVANIZED DISTRIBUTING GATE

C-2 HELPFUL INFORMATION:

C-2 Standard ( for Concrete) Spigot OD is 1/4" smaller than nominal size.C-2 Type 4 Spigot OD is 1/8" smaller than nominal size.C-2 Standard (for Concrete) has "red handle"C-2 Type 4 has "black handle"

GATE SIZE

WT. (LBS.)

C-2 CONCRETE W/ STRAP

C-2-4 CMP &

LOW HEAD PVC

W/ TYPE 4 INSERT

C-2-6 HDPE &

80 LB PIP W/ TYPE 6

FRAME

C-2 CIP CIP-IPS

C-2 PIP CIP-PIP

C-2 2’ 80 LB PIP & CONCRETE

W/ 2’ STRAP

SLIDE ONLY W/ STRAP HANDLE

6" 2.5 37.0013606001

37.0013606002

37.0013606006

42.9013606021

42.9013606031

37.0013606010

16.0041706236

8" 3 42.0013608001

42.0013608002

42.0013608006

44.0013608021

44.0013608031

42.0013608010

18.0041708236

10" 4 50.0013610001

50.0013610002

50.0013610006

56.8913610021

56.8913610031

50.0013610010

19.0041710236

12" 5 61.0013612001

61.0013612002

61.0013612006

64.0013612021

64.0013612031

68.0013612010

26.0041712236

14" 6 68.0013614001 N/A N/A N/A N/A 68.00

13614010 26.00

41714236

15" 8.5 103.0013615001

103.0013615002

103.0013615006 N/A N/A 163.00

1361501054.00

41715236

16" 9 119.0013616001 N/A N/A N/A N/A 119.00

13616010 46.00

41716236

18" 14 163.0013618001

163.0013618002

163.0013618006 N/A N/A 163.00

1361801054.00

41718236

20" 17 259.0013620001

259.0013620002

259.0013620006 N/A N/A N/A 83.00

41720236

21" 18 268.0013621001 N/A N/A N/A N/A N/A 88.00

41721236

24" 20 364.0013624001 N/A 364.00

13624006 N/A N/A N/A 100.0041724236

30" 26 536.0013630001 N/A N/A N/A N/A N/A 141.00

41730236


43C-8 GATES

C-8 SURESEAL STEEL DITCH GATE AND C-8E ECONOMY DITCH GATE

Notes: Pipe ID must be specified for all C-8 orders

SLIDE DITCH GATES - GALVANIZED STEEL–C-8 & C-8E SERIES

These economical gates are used on ditch turnouts and similar low head operations. They feature a positive one-quarter-turn cam lock for positive seating and easy regulation of flow. Models for concrete, corrugated steel, PVC, CIP and HDPE mounting. Sizes 8" through 24".

• C-8 models have a long-life neoprene composition seal within a press-formed recess in the cover (available in models up to 16"). This allows tight sealing with minimum drag during opening and closing.

• C-8E models have steel seats.C-8

C-8E C8E HDPE Mounting Detail showing seat C-8

GATE SIZE

WT. (LBS.)

C-8 CONCRETE STANDARD W/ GASKET

C-8-4 CMP &

LOW HEAD PVC

W/ GASKET

C-8E CONCRETE STANDARD NO GASKET

C-8E-6 HDPE &

80 LB. PIP NO GASKET

C-8E CIP-IPS

NO GASKET

C-8E CIP-PIP

NO GASKET

C-8E-4 CMP &

LOW HEAD PVC

NO GASKET

ADD’L HANDLE LENGTH (PER FT.)

8" 9 133.0014608001

133.0014708001

123.0014808001

123.0014808006

123.0014808011

123.0014808013

123.0014908001

7.9350001146

10" 12 149.0014610001

149.0014710001

139.0014810001

139.0014810006

139.0014810011

139.0014810013

139.0014910001

7.9350001146

12" 14 169.0014612001

169.0014712001

159.0014812001

159.0014812006

159.0014812011

159.0014812013

159.0014912001

7.9350001146

14" 17 222.0014614001

222.0014714001

212.0014814001

212.0014814006 N/A N/A 212.00

149140017.93

50001146

15" 17 261.0014615001

261.0014715001

251.0014815001

251.0014815006 N/A N/A 251.00

14915001 7.93

50001146

16" 20 311.0014616001

311.0014716001

301.0014816001

301.0014816006 N/A N/A 301.00

149160019.06

50002146

18" 24 N/A N/A 353.0014818001

353.0014818006 N/A N/A 353.00

14918001 9.06

50002146

21" 27 N/A N/A 432.0014821001

432.0014821006 N/A N/A N/A 9.06

50002146

24" 30 N/A N/A 541.0014824001

541.0014824006 N/A N/A N/A 9.06

50002146


44C-

8 GA

TES

PART

S

C-8 PARTS

PARTGATE SIZE

8" 10" 12" 14"

Frame - C-8 66.9540208146

73.1340210146

76.2240212146

94.7640214146

Frame - C-8E 50.4740208148

54.5940210148

57.6840212148

69.0140214148

Slide - C-8 31.9341708146

40.1741710146

51.5041712146

58.7141714146

Slide - C-8E 21.6341708148

26.7841710148

28.8441712148

42.2341714148

Arch 10.3044008146

13.3944010146

13.3944012146

17.5144014146

Handle 13.3950004146

13.3950004146

13.3950004146

17.5150014146

Handle Guide 4.1254501146

4.1254501146

4.1254501146

4.1254501146

Guide Bolt 3.0980803175

3.0980803175

3.0980803175

3.0980803175

Seal Only 11.3343508146

14.4243510146

16.4843512146

17.5143514146

PARTGATE SIZE

15" 16" 18" 21" 24"

Frame - C-8 107.1240215146

122.5740216146 N/A N/A N/A

Frame - C-8E 90.6440215148

84.4640216148

104.0340218148

129.7840221148

143.1740224148

Slide - C-8 61.8041715146

76.2241716146 N/A N/A N/A

Slide - C-8E 47.3841715148

51.5041716148

56.6541718148

74.1641721148

92.7041724148

Arch 19.5744015146

20.6044016146

24.7244018146

28.8444021146

35.0244024146

Handle 17.5154501146

17.5150014146

21.6350021146

21.6350021146

21.6350021146

Handle Guide 4.1254502146

4.1254501146

4.1254501146

4.1254501146

4.1254501146

Guide Bolt 3.0980803175

3.0980803175

3.0980803175

3.0980803175

3.0980803175

Seal Only 18.5443515146

21.6343516146 N/A N/A N/A


45H-30 LINE GATES

H-30 LINE GATES

GATE SIZEPRICE WITH CAST IRON SEATS1

HUB ENDS(CEMENT) SPIGOTS FOR PVC CIP / IPS HUB2 FLANGED (IPS)

(125 LB. ASA)ADD

PIP INSERT

6" N/A897.001060600075 LBS.

938.001080600074 LBS.

1165.001040600084 LBS.

15.451800418

8"961.001020800076 LBS.

975.001060800094 LBS.

1,183.001080800092 LBS.

1,375.0010408000104 LBS.

15.451800408

10"1060.001021000087 LBS.

1,158.0010610000120 LBS.

1,410.0010810000117 LBS.

1,690.0010410000131 LBS.

19.571800412

12"1,245.00

10212000143 LBS.

1,375.0010612000169 LBS.

1,608.0010812000161 LBS.

2,005.0010412000182 LBS.

19.571800409

14"1,498.00

10214000182 LBS.

N/A N/A2,270.00

10414000200 LBS.

N/A

15" x 14" (15" Pipe

Size)N/A

1,653.0010615000200 LBS.

2,122.0010815000194 LBS.

N/A N/A

16"1,952.00

10216000245 LBS.

N/A N/A2,725.00

10416000390 LBS.

N/A

18"2,450.00

10218000305 LBS.

3,068.0010618000325 LBS.

N/A3,460.00

10418000610 LBS.

N/A

20"3,908.00

10220000462 LBS.

N/A N/A4,596.00

10420000960 LBS.

N/A

20" x 21"*(21" Pipe

Size)N/A

3,908.00*10620005480 LBS.

N/A N/A N/A

24"7,590.00

10224000883 LBS.

8,770.0010624000931 LBS.

N/A9,916.00

10424000998 LBS.

N/A

30"16,158.00

102300002,440 LBS.

N/A N/A17,606.00

104300002,550 LBS.

N/A

36" N/A N/A N/A25,725.00

10436000 4290 LBS.

N/A

Notes: 1 Bronze Seats available, please call for quote. 2 Add PIP Inserts for PIP Pipe when placing order, see additional cost column

Vee Notch (Metering) HV-30 and Double Disc (HD-30) lines available by special order. Call for quote *on 20" x 21" for 80# or 100# PIP NO ADAPTER REQUIRED.

LINE GATES–H-30 "RED TOP" SERIES

Our line gates are for direct installation into pipelines and are designed for longevity. The heavy-cast iron construction is complimented by a non-rising stainless steel screw and bronze nut with double lead Acme threads. A cast iron packing gland with a bronze packing nut which eliminates “freezing” due to rust or corrosion.

H-30 H-30 with V-notch opening

KEY FEATURES:• Precision-machined iron seating surface (bronze seats optional)

• Each gate is hydrostatically tested

• 60 feet maximum seating (face) pressure (PSI)• 10 feet maximum unseating (back) pressure (PSI)

• Non-rising stainless steel stem, with bronze nut and precision machined double lead Acme threads for faster opening and closing

• Bronze packing gland nut and lift nut

• Hand wheel standard; 2" square operating nut optional


46H-

30 L

INE

GATE

PAR

TS

Notes: 1 Type 4 is designed for Low Head pipe.

PARTGATE SIZE

6" 8" 10" 12" 14" 15" x 14" 16"

Bonnet 127.7242006102

140.0842008102

150.3842010102

220.4242012102

269.8642014102

269.8642014102

333.7242016102

Bonnet Gasket 18.5443506102

21.6343508102

23.6943510102

35.0243512102

39.1443514102

39.1443514102

42.2343516102

Bonnet Bolts(Set of bolts and nuts)

11.1880803150

11.1880804150

11.1880804150

12.2180805150

12.2180805150

12.2180805150

16.3380806150

Arch 45.3210406162

51.5010408162

69.0110410162

79.8210412162

90.6410414162

90.6410414162

167.8910416162

Stainless Screw (Stem) w/ Collar Double Lead

139.0542706103

145.2342708103

159.6542710103

166.8642712103

167.8942714103

167.8942714103

225.5742716103

Brass Screw Nut (Thrust Nut) Double Lead

42.5042106103

42.5042106103

42.5042106103

42.5042106103

42.5042106103

42.5042106103

59.7442116103

H-30 LINE GATES PARTS

Body( Cast Iron w/ Hub Ends) N/A 434.66

40508020505.7340510020

633.4540512020

795.1640514020 N/A 1,204.70

40516020

Bodyw/ Type 4 Spigots1 (Iron Seats))

509.8540506060

627.2740508060

748.8140510060

935.2440512060

N/A 1,189.6540515060

1,500.7140516060

Body w/ Flanged Ends (Iron Seats)

814.7340506080

814.7340508080

1,002.1940510080

1,424.4940512080

1,587.2340514080 N/A 2,247.46

40516080

Bodyw/ CIP Hubs (Iron Seats)

587.1040506040

610.7940508040

689.7040510040

859.2040512040 N/A N/A N/A

Bodyw/ CIP Hubs (Brass Seats)

874.4740406040

910.5240408040

1,032.0640410040

1,274.1140412040 N/A N/A N/A

Packing Gland Body 36.0564806102

36.0564806102

36.0564806102

36.0564812102

36.0564812102

36.0564812102

43.2664816102

Packing Gland Nut 32.9664606102

32.9664606102

32.9664606102

32.9664606102

32.9664606102

32.9664606102

32.9664616102

Packing Gland Packing 8.2443408040

8.2443408040

8.2443408040

8.2443408040

8.2443408040

8.2443408040

8.2443408040

Packing Gland Gasket 5.1543506112

5.1543506112

5.1543506112

5.1543512112

5.1543512112

5.1543512112

5.1543512112

Packing Gland Bolts 4.122277

4.122277

4.122277

4.122277

4.122277

4.122277

4.122277

Handwheel 54.5949512060

54.5949512060

54.5949512060

54.5949512060

54.5949512060

54.5949512060

64.8949512076

Handwheel w/Spinner 62.8349512061

62.8349512061

62.8349512061

62.8349512061

62.8349512061

62.8349512061

62.8349512078

Extension Stub(per ft.)

8.2490058010

8.2490058010

8.2490058010

8.2490058010

8.2490058010

8.2490058010

10.3090034010

Set Screws (ea.)

4.121261

4.121261

4.121261

4.121261

4.121261

4.121261

4.121261

Connector Stem Extension(Coupling)

26.7855500060

26.7855500060

26.7855500060

26.7855500060

26.7855500060

26.7855500060

27.8155500075

Square Stock for Handle (per ft.)

8.2490058010

8.2490058010

8.2490058010

8.2490058010

8.2490058010

8.2490058010

10.3090034010

Cover Cast Iron 189.5241006050

200.8541008050

206.0041010050

211.1541012050

222.4841014050

222.4841014050

235.8741016050

Cover Perm. BronzeCall for Quote

41406051

Call for Quote41408051



Call for Quote

41414051



2" SQ OP Nut(5/8" Shaft for 6" to 14" Valves)

38.1149202060

38.1149202060

38.1149202060

38.1149202060

38.1149202060

38.1149202060

37.0049202060


47

BodyCast Iron w/ Hub Ends

1,424.4940518020

2,253.6440520020 Call For Quote 3,811.00

405240206,766.07

40530020 Call For Quote

Bodyw/ Type 4 Spigots1 (Iron Seats)

2,045.5840518060

2,641.9540520060 Call For Quote N/A N/A N/A

Bodyw/ Flanged Ends (Iron Seats)

2,679.0340518080

3,577.1940520080 Call For Quote 6,504.45

4052408011,365.02

4053008015,911.44

40536080

Packing Gland Assembly(Includes body, nut, packing, and gasket)

101.9764516102

124.6364520102 Call For Quote 245.14

64524102245.1464530102

474.8364536102

Packing Gland Body 43.2664816102

73.1364820102 Call For Quote 124.63

64824102135.9664830102

215.2764836102

Packing Gland Nut 32.9664616102

57.6864620102 Call For Quote N/A N/A N/A

Packing Gland Packing 8.2443408040

8.2443408040 Call For Quote 10.30

4341505010.30

4341505010.30

43415050

Packing Gland Gasket 5.1543512112

7.2143520112 Call For Quote 9.27

4352411210.30

4353011210.30

43536112

Packing Gland Bolts 4.122277

5.152041 Call For Quote 5.15

20485.152048

5.152048

Handwheel 70.0449514076

73.1349514094 Call For Quote 221.45

49518126241.0249524132

464.5349530126

Handwheel w/ Spinner 82.4049512078

85.5049518132 Call For Quote N/A N/A N/A

Extension Stub(per ft.)

10.3090034010

10.3090034010 Call For Quote 11.33

9007801011.33

9007801011.33

90078010

Set Screws(ea.)

4.121261

4.121261 Call For Quote 4.12

12614.121261

4.121261

Connector Stem Extension(Coupling)

27.8155500075

29.8755500080 Call For Quote 33.99

5550012533.99

5550012533.99

55500125

Square Stock for Handle(per ft.)

10.3090034010

11.3390078010 Call For Quote 41.00

21100000841.00

21100000841.00

211000008

Cover - Cast Iron 314.1541018050

568.5641020050 Call For Quote 896.10

410240501,828.25

410300504,843.06

41036050

Cover - Perm. Bronze Call For Quote41418051

Call For Quote41420051 Call For Quote Call For Quote

41424051Call For Quote


41436051

2" SQ OP Nut 37.0049202075

37.0049202875 Call For Quote 37.00

4920212537.00

4920212537.00

49202125

Spinner Knob Assembly 11.0049500100

11.0049500100 Call For Quote 11.00

4950010011.00

4950010011.00

49500100

H-30 LINE GATE PARTS

Notes: 1 Type 4 is designed for Low Head pipe.

PARTGATE SIZE

18” 20” 20” x 21” 24” 30” 36”

Bonnet 539.7242018102

731.3042020102 Call For Quote 1,639.76

420241022,615.17

420301027,891.86

42036102

Bonnet Gasket 49.4443518102

57.6843520102 Call For Quote 93.73

43524102111.2443530102

401.7043536102

Bonnet Bolts(Set of bolts and nuts)

11.3380806150

16.4880807150 Call For Quote 27.81

8080815032.96

8080915032.96

80809150

Arch 191.5810418162

201.8810420162 Call For Quote 230.72

10424162751.9010430162

1,458.4810436162

Stainless Screw (Stem) w/ Collar Double Lead

250.2942718103

309.0042720103 Call For Quote 401.70

42724102 Call For Quote Call For Quote

Brass Screw Nut (Thrust Nut) Double Lead

59.7442116103

147.0042120103 Call For Quote 296.00

42124102296.0042124102

296.004212402

H-30 LINE GATES PARTS


48 F-10 CAST IRON FLAP GATE

GATE SIZEFOR WALL MOUNT FOR CORRUGATED METAL PIPE FOR CONCRETE PIPE

WT. (LBS.)

FLATBACK WT. (LBS.)

CMP SPIGOTBACK WT. (LBS.)

FLATBACK W/ TAPER SETTING COLLAR

HDPE ADAPTER

4" 9 305.00707404001 18 320.00

707604001 N/A N/A

6" 11 344.00707406001 21 354.00

707606001 18 404.00707406001

108.1547806100

8" 23 368.00707408001 32 410.00

707608001 27 510.00707408010

120.5147808100

10" 43 432.00707410001 56 455.00

707610001 52 520.00707410010

140.0847810100

12" 50 464.00707412001 64 498.00

707612001 57 524.00707412010

153.4747812100

14" 55 588.00707414001 69 609.00

707614001 65 636.00707414010

156.5647814100

15" 59 644.00707415001 75 660.00

707615001 69 690.00707415010

168.9247815100

16" 75 682.00707416001 92 698.00

707616001 88 724.00707416010

189.5247816100

18" 93 1,015.00707418001 106 1,050.00

707618001 100 1,072.00707418010

210.1247818100

20" 110 1,100.00707420001 129 1,130.00

707620001 122 1,170.00707420010

324.4547820100

21" 115 1,125.00707421001 140 1,150.00

707621001 130 1,185.00707421010

427.4547821100

24" 155 1,460.00707424001 183 1,510.00

707624001 170 1,560.00707424010

475.8647824100

30" 300 2,212.00707430001 338 2,285.00

707630001 325 2,300.00707430010

604.6147830100

36" 430 2,560.00707436001 490 2,660.00

707636001 465 2,780.00707436010

726.1547836100

42" 565 4,955.00707442001 650 5,250.00

707642001 600 5,300.00707442010

919.7947842100

48" 720 6,235.00707448001 800 6,290.00

707648001 760 6,340.00707448010

973.3547848100

54" 1,135 7,765.00707454001 1,129 8,133.00

707654001 1,200 N/A Call for Quote47854100

60" 1,900 10,069.00707460001 2,100 10,469.00

707660001 2,010 N/A Call for Quote47860100

72" 2,480 Call for Quote707472001 2,680 Call for Quote

707672001 2,580 N/A Call for Quote47872100

Notes: HDPE adapters can be made to fit most pipes-provide pipe specifications when placing order. 100% Galvanized pricing available- Call for quote

CAST IRON FLAP GATES–F-10 "RED TOP" SERIES

Flap gates permit the free outflow of water from a pipe or structure while preventing and sealing against backflow. They are applied in reservoirs, tidal basins, ponding basins, waste lines, pump stands and storm drain systems. It is rated for a seating head of up to 10 feet. Sizes 6" – 72".

KEY FEATURES:• Frame and cover of heavy-duty cast iron.

• Galvanized steel angle links balance pivoted on bronze bushings. Stainless steel optional.

• Built-in “Safety Bar” prevents sticking.

• 5 degree seat on sizes to 24", 2.5 degree seat on larger sizes allows for closure and compensates for piping irregularities.

• Mounting options: flatback, spigot back for CMP, tapered setting collar for concrete pipe or HDPE adapter.

F-10

F-10

FLA

P GA

TE


49F-10 OPTIONS

GATE SIZE

OPTION

GALVANIZED ANCHOR BOLTS

STAINLESS STEEL ANCHOR BOLTS

STAINLESS STEEL LINKS

STAINLESS STEEL HINGE BOLTS

BRONZE SEATS

MACHINED FLATBACK FRAMES

TO FIT O.D. STEEL PIPE

4" 49.4475005408

194.6775005108 28.48 50.47 558.26 N/A

6" 49.4475005408

194.6775005108 29.12 53.56 558.26 153.47

8" 49.4475005408

194.6775005108 30.08 53.56 559.29 153.47

10" 49.4475005408

194.6775005108 32.02 53.56 631.39 153.47

12" 49.4475005408

194.6775005108 34.84 53.56 759.11 153.47

14" 49.4475005408

194.6775005108 35.60 53.56 909.49 153.47

15" 49.4475005408

194.6775005108 35.64 59.74 1,000.13 153.47

16" 49.4475005408

194.6775005108 37.52 58.71 1,035.15 153.47

18" 49.4475006410

285.3175006110 43.56 138.02 1,099.01 164.80

20" 49.4475006410

285.3175006110 47.73 138.02 1,287.50 164.80

21" 49.4475006410

285.3175006110 48.17 138.02 1,413.16 194.67

24" 49.4475006410

285.3175006110 57.68 138.02 1,674.69 194.67

30" 85.4975007412

366.6875007112 73.00 256.47 2,417.41 223.51

36" 85.4975007412

366.6875007112 78.26 256.47 3,036.44 223.51

42" 85.4975007412

366.6875007112 85.52 288.40 4,622.64 320.33

48" 85.4975007412

366.6875007112 102.48 326.51 5,880.27 320.33

54" 178.1975010414

410.9775010114 277.68 326.51 8,051.51 N/A

60" 178.1975010414

410.9775010114 344.92 326.51 9,186.57 N/A

72" 178.1975010414

410.9775010114 427.12 326.51 13,347.77 N/A

F-10 FLAP GATE PARTS


50

Notes: 304SS Hinge Links available-Call for Quote

F-10 PARTS

GATE SIZE

PARTS

FRAME - FLATBACK

FRAME - SPIGOT-

BACK

COVER (FLAP)

HINGE LINK - LEFT

(GALV)

HINGE LINK - RIGHT (GALV)

BUSHING - BRONZE

BUSHING - GALVANIZED

GALV HINGE BOLTS & NUT

(EA.)

TAPER SETTING COLLAR

4" 203.9440004074

210.1240004076

157.5941004074

19.5745304075

19.5745404075

7.2183504162 N/A 4.12

1263 N/A

6" 207.0340006074

211.1540006076

160.6841006074

19.5745306075

19.5745406075

7.2183504162 N/A 4.12

126363.86

47806154

8" 221.4540008074

224.5440008076

173.0441008074

24.7245308075

24.7245408075

7.2183504162 N/A 4.12

126363.86

47808154

10" 270.8940010074

276.0440010076

227.6341010074

24.7245310075

24.7245410075

7.2183504162 N/A 4.12

126366.95

47810154

12" 273.9840012074

283.2540012076

254.4141012074

24.7245312075

24.7245412075

7.2183504162 N/A 4.12

126366.95

47812154

14" 285.3140014074

297.6740014076

265.7441014074

26.7845314075

26.7845414075

7.2183504162 N/A 4.12

126379.31

47814154

15" 297.6740015074

309.0040015076

287.3741015074

27.8145315075

27.8145415075

7.2183504162 N/A 4.12

126379.31

47815154

16" 379.0440016074

395.5240016076

316.2141016074

28.8445316075

28.8445416075

7.2183504162 N/A 4.12

126379.31

47816154

18" 413.0340018074

423.3340018076

426.4241018074

37.0845318075

37.0845418075

14.4283507300 N/A 13.39

206491.67

47818154

20" 492.3440020074

512.9440020076

443.9341020074

43.2645320075

43.2645420075

14.4283507300 N/A 13.39

206491.67

47820154

21" 568.5640021074

595.3440021076

465.5641021074

45.3245321075

45.3245421075

14.4283507300 N/A 13.39

206491.67

47821154

24" 645.8140024074

666.4140024076

675.6841024074

50.4745324075

50.4745424075

14.4283507300 N/A 13.39

2064103.0047824154

30" 1,254.5440030074

1,287.5040030076

984.6841030074

82.4045330075

82.4045430075

23.6983510425 N/A 16.48

2073154.5047830154

36" 1,329.7340036074

1,460.5440036076

1,275.1441036074

94.7645336075

94.7645436075

23.6983510425 N/A 16.48

2073200.8547836154

42" 2,855.1640042074

2,895.3340042076

2,650.1941042074

120.5145342075

120.5145442075

41.2083510600 N/A 16.48

2075293.5547842154

48" 3,524.6640048074

3,623.5440048076

3,677.1041048074

146.2645348075

146.2645448075

41.2083510600 N/A 16.48

2075359.4747848154

54" 4,778.1740054074

4,942.9740054076

4,705.0441054074

292.5245354075

292.5245454075

79.3183512688

38.1183252130

36.052076 N/A

60" 5,072.7540060074

5,191.2040060076

5,191.2041060074

324.4545360075

324.4545460075

123.6083512662

38.1183252130

36.052076 N/A

72" 6,355.1040072074

7,409.8240072076

8,435.7041072074

357.4145372075

357.4145472075

123.6083512662

54.591022307

36.052076 N/A

F-10

PAR

TS


51AF-41 SSF-41 PARTS

Notes: Machined Flange Back available with 25 lb. or 125 lb. ANSI drilling. Specify Corrugated Metal, Concrete, PVC type, or HDPE when ordering adapterNot for pump discharge. For sizes 96” and larger, contact factory for custom quotation.

AF-41 SSF-41

FLAP GATES–AF-41 SERIES (ALUMINUM) SSF-41 SERIES (STAINLESS STEEL)

Our AF-41 and SSF-41 gates are inherently corrosion-resistant and rust-proof automatic drainage gates. They are commonly used with aluminum corrugated pipe, plastic or HDPE. Models are also available for flange and wall mounting. This design prevents electrolysis associated with cast iron gates to aluminum pipe connections. The rugged J-bulb neoprene adjustable seats provide excellent sealing against return flow. Sizes 8"– 84" listed above, sizes 96" and larger, call for quote. Available in aluminum, 304 stainless steel and 316 stainless steel. Square and rectangular versions also available (AF-43 and SSF-43 Series).

AF-41 & SSF-41 DRAINAGE FLAP GATES

GATE SIZE

AF-41 ALUMINUM

SSF-41 304 STAINLESS STEEL

SSF-41 316 STAINLESS STEEL

SPIGOT BACK

FLAT BACK

FLANGE BACK

SPIGOT BACK

FLAT BACK

FLANGE BACK

SPIGOT BACK

FLAT BACK

FLANGE BACK

8” 1,565.00 1,835.00 1,872.00 1,987.00 2,354.00 2,434.00 2,105.00 2,509.00 2,622.00

10” 1,650.00 1,962.00 2,012.00 2,134.00 2,505.00 2,619.00 2,287.00 2,699.00 2,860.00

12” 1,857.00 2,122.00 2,199.00 2,404.00 2,779.00 2,952.00 2,620.00 3,044.00 3,289.00

14” 1,975.00 2,244.00 2,329.00 2,607.00 2,994.00 3,189.00 2,832.00 3,275.00 3,550.00

15” 2,058.00 2,325.00 2,415.00 2,715.00 3,107.00 3,310.00 2,949.00 3,399.00 3,687.00

16” 2,002.00 2,264.00 2,367.00 2,655.00 3,040.00 3,275.00 2,894.00 3,340.00 3,672.00

18” 2,075.00 2,282.00 2,380.00 2,699.00 3,085.00 3,307.00 2,950.00 3,402.00 3,719.00

20” 2,150.00 2,599.00 2,717.00 2,909.00 3,534.00 3,805.00 3,217.00 3,914.00 4,299.00

21” 2,175.00 2,629.00 2,729.00 2,965.00 3,599.00 3,827.00 3,294.00 4,005.00 4,330.00

24” 2,255.00 2,772.00 2,977.00 3,145.00 3,940.00 4,407.00 3,474.00 4,420.00 5,080.00

30” 2,533.00 3,087.00 3,382.00 3,687.00 4,579.00 5,245.00 4,305.00 5,390.00 6,337.00

36” 2,808.00 3,403.00 3,829.00 4,174.00 5,172.00 6,135.00 4,889.00 6,125.00 7,492.00

42” 3,348.00 4,015.00 4,552.00 5,367.00 6,337.00 7,559.00 6,517.00 7,634.00 9,364.00

48” 3,665.00 4,342.00 4,974.00 6,347.00 7,349.00 8,787.00 7,732.00 8,895.00 10,937.00

54” 4,083.00 4,912.00 5,605.00 7,457.00 8,722.00 10,307.00 9,234.00 10,735.00 12,982.00

60” 4,696.00 5,537.00 6,357.00 8,559.00 9,864.00 11,734.00 10,620.00 12,182.00 14,834.00

66” 5,015.00 5,872.00 6,862.00 9,322.00 10,685.00 12,950.00 11,669.00 13,312.00 16,522.00

72” 6,273.00 7,220.00 8,654.00 12,199.00 13,675.00 16,950.00 16,250.00 18,022.00 22,665.00

84” 7,758.00 8,857.00 10,589.00 15,639.00 17,412.00 21,260.00 21,080.00 23,282.00 28,739.00


52PF

-25

PF-2

5W V

ALVE

S

PF-25 FLANGEBACK AND PF-25W COMPRESSION FLAP VALVE

GATE SIZE

PF-25F FLANGEBACK (125# DRILLING)

IRON COVER1 / NEOPRENE SEATS

WT. (LBS.)

IRON COVER1 / BRONZE SEATS

WT. (LBS.)

4" 230.00706404001 20 459.38

706404002 20

6" 285.00706406001 36 799.28

706406002 36

8" 330.00706408001 48 880.65

706408002 49

10" 491.00706410001 68 1,047.51

706410002 69

12" 419.00706412001 176 1,355.48

706412002 178

14" 896.00706414001 130 1,690.23

706414002 133

16" 1,109.00706416001 145 2,257.76

706416002 148

18" 1,200.00706418001 181 2,796.45

706418002 185

20" 2,095.00706420001 245 3,251.71

706420002 250

24" 2,490.00706424001 360 3,962.41

706424002 370

Notes: 1 I.D. Gasket is for IPS Pipe or Schedule 40 PVC

2 O.D. Gasket is for PIP Pipe 80# or 100#.

Model PF-25W not designed for Ductile Pipe

GATE SIZE

IRON COVER W/ NEOPRENE SEATS IRON COVER W/ BRONZE SEATS

WT. (LBS.)

W/ I.D. GASKET1

W/ O.D. GASKET2

W/ SDR GASKET

WT. (LBS.)

W/ I.D. GASKET1

W/ O.D. GASKET2

W/ SDR GASKET

4" 13 218.00706604001

218.00706604002

218.00706604006 14 337.84

706604021342.99

706604022342.99

706604023

6" 19 226.00706606001

226.00706606002

229.00706606006 20 627.27

706606021659.20

706606022659.20

706606023

8" 21 255.00706608001

255.00706608002

265.00706608006 22 712.76

706608021712.76

706608022712.76

706608023

10" 27 328.00706610001

328.00706610002

338.00706610006 29 855.93

70661021855.93

706610022855.93

706610023

12" 44 402.00706612001

402.00706612002

416.00706612006 46 1,023.82

7066120211,031.03706612022

1,031.03706612023

14" 62 525.00706614001 N/A 536.00

706614006 65 1,271.02706614021 N/A 1,271.02

706614023

PF-25F

PF-25W

Cover counter weights available, specify angle needed.

4" to 12" add $416.0014" to 18" add $833.00


53PF-25 PARTS

PF-25 PARTS

Counter weight available - Call for Quote

PARTGATE SIZE

4" 6" 8" 10" 12" 14" 16" 18" 20" 24"

Compression Body - Iron Seats

119.4840504066

196.7340506066

249.2640508066

309.0040510066

340.9340512066

513.9740514066

N/A N/A N/A N/A

Compression Body - Bronze Seats

173.0440504067

314.1540506067

354.3240508067

393.4640510067

444.9640512067

629.3340514067

N/A N/A N/A N/A

Flangeback Body - Iron Seats

211.1540504062

324.4540506062

330.6340508062

335.7840510062

438.7840512062

493.3740514062

1,027.9440516062

1,487.3240518062

1,893.1440520062

2,109.4440524062

Flangeback Body - Bronze Seats

326.5140504063

546.9340506063

651.9940508063

730.2740510063

751.9040512063

1,066.0540514063

1,703.6240516063

2,325.7440518063

2,752.1640520063

2,914.9040524063

Cover - Iron Seats 129.7841204064

173.0441206064

227.6341208064

279.1341210064

335.7841212064

398.6141214064

768.3841216064

1,295.7441218064

1,307.0741220064

1,737.6141224064

Cover - Bronze Seats

324.4541004065

552.0841006065

717.9141008065

739.5441010065

841.5141012065

1,141.2441014065

1,189.6541016065

1,525.4341018065

1,844.7341020065

2,054.8541024065

Packing Cover Only 20.6043504066

28.8443506066

28.8443508066

31.9343510066

33.9943512066

38.1143514066

53.5643516066

55.6243518066

60.7743520066

74.1643524066

Follow Ring 17.5158504066

31.9358506066

32.9658508066

38.1158510066

62.8358512066

95.7958514066

N/A N/A N/A N/A

Ring Bolts (ea.) 5.1580802550

5.1580803250

5.1580803250

5.1580803250

5.1580803250

5.1580803250

N/A N/A N/A N/A

Hinge Pin Assem-bly

19.5782605510

21.6382605698

23.6982605860

24.7282651098

26.7882651148

32.9682651335

35.0282651510

39.1482661660

42.2382661860

52.5382681910

Pipe Seal Gaskets - I.D. Size (ea.)

21.6343504010

24.7243506010

25.7543508010

26.7843510010

35.0243512010

36.0543514010

N/A N/A N/A N/A

Pipe Seal Gaskets - O.D. Size (ea.)

20.6043504020

23.6943506020

24.7243508020

25.7543510020

32.9643512020

36.0543514020

N/A N/A N/A N/A


54RE

D TO

P VA

LVES

RED TOP OVERFLOW VALVES

Notes: Type 4 is designed for Low Head 100 ft. PIP pipe. Bronze Screw available--Call for Quote

VALVE SIZE PIPE STYLE

WT. (LBS.)

VEE THREAD STAINLESS STEEL SCREW

ACME THREAD STAINLESS STEEL SCREW

3 ½"

CONCRETE 3 31.00701203002 N/A

TYPE 4 (EPOXY) N/A N/A

IPS (SOLVENT) N/A N/A

PIP (SOLVENT) N/A N/A

4"TYPE 4 (EPOXY) 3.5 35.00

701204004 N/A

IPS (SOLVENT) 3 75.00701204008 N/A

6"

CONCRETE 6.5 62.00701206003

62.00701206011

TYPE 4 (EPOXY) 7 72.00701206004

72.00701206021

IPS (SOLVENT) 8 101.00701206057

101.00701206059

PIP (SOLVENT) 8 101.00701206058

101.00701206060

8"

CONCRETE 10 84.00701208003

84.00701208011

TYPE 4 (EPOXY) 10 88.00701208004

88.00701208021

IPS (SOLVENT) 13 126.00701208055

126.00701208057

PIP (SOLVENT) 13 126.00701208056

126.00701208058

Concrete Water dispersal Red TopType 4 (Plastic Pipe, Epoxy Fit)

Solvent Weld (IPS/PIP)

10"

CONCRETE 15 108.00701210003

108.00701210011

TYPE 4 (EPOXY) 15 123.00701210004

123.00701210021

IPS (SOLVENT) 20 178.00701210055

178.00701210057

PIP (SOLVENT) 20 178.00701210056

178.00701210058

12"

CONCRETE 21 151.00701212003

151.00701212011

TYPE 4 (EPOXY) 21 175.00701212004

175.00701212021

IPS (SOLVENT) 27 206.00701212055

206.00701212057

PIP (SOLVENT) 27 206.00701212056

206.00701212058


55RED TOP VALVE PARTS

RED TOP OVERFLOW VALVES REPLACEMENT PARTS

PARTVALVE SIZE

3 ½" 4" 5" 5" x 6" 6" 6 ½" 8"

Frame - Concrete Pipe Vee Thread

17.5140003003

18.5440004003

37.0840005003 N/A 37.08

4000600337.08

4000700339.14

40008003

Frame - Concrete Pipe Acme Thread N/A N/A N/A N/A 37.08

4000601337.08

4000701339.14

40008013

Frame - Type 4 Pipe (Epoxy) Vee Thread N/A 19.57

4000400431.93

4000500431.93

4000500433.99

40006004 N/A 46.3540008004

Frame - Type 4 Pipe (Epoxy) Acme Thread N/A N/A N/A N/A 37.08

40006014 N/A 46.3540008014

Frame - IPS (Solvent) Vee Thread N/A 38.00

40304003 N/A N/A 51.0040306005 N/A 75.00

40308004

Frame - IPS (Solvent) Acme Thread N/A N/A N/A N/A 51.00

40306004 N/A 75.0040308003

Frame - PIP (Solvent) Vee Thread N/A N/A N/A N/A 51.00

40306007 N/A 75.0040308007

Frame - PIP (Solvent) Acme Thread N/A N/A N/A N/A 51.00

40306006 N/A 75.0040308005

Cover Complete - Vee Thread, Stainless Steel (Includes Cover, Gasket, & Screw Complete)

29.9541503003

34.3441504004

38.6641505004

38.6641505004

46.2141506002

55.4641507002

56.5641508002

Cover Complete - Acme Thread, Stainless Steel (Includes Cover, Gasket, & Screw Complete) N/A N/A N/A N/A 46.21

4150601155.46

4150701156.56

41508015

Cover Packed 19.5741203001

19.5741204001

20.6041205001

20.6041205001

25.7541206001

26.7841207001

36.0541208001

Packing Gasket 4.1243503001

4.1243504001

5.1543505001

5.1543505001

5.1543506001

5.1543507001

6.0643508001

Screw Complete - Vee Thread, Stainless Steel (Includes Screw, Nut, & Washer)

17.5743005004

17.5743005004

21.2943005005

21.2943005005

27.2743006002

27.2743006002

27.2743006002

Screw Complete - Acme Thread, Stainless Steel (Includes Screw, Nut, & Washer) N/A N/A N/A N/A 27.27

4300601127.27

4300601127.27

43006011

Screw Only - Stainless Steel Vee Thread

15.1542505006

15.1542505006

18.8542505004

18.8542505004

24.2442506002

24.2442506002

24.2442506002

Screw Only - Stainless Steel Acme Thread N/A N/A N/A N/A 24.24

4250601124.24

4250601124.24

42506011

Screw Only - Bronze Vee Thread

17.5142505001

17.5142505001

21.6342505002

21.6342505002

28.8442506001

28.8442506001

28.8442506001

Screw Only - Bronze Acme Thread N/A N/A N/A N/A 28.84

4250601028.84

4250601028.84

42506010

Cover Nut - Vee Thread 4.1280205001

4.1280205001

4.1280205001

4.1280205001

4.1280206001

4.1280206001

4.1280206001

Cover Nut - Acme Thread N/A N/A N/A N/A 4.1280206010

4.1280206010

4.1280206010

UHMW Washer 3.0981805001

3.0981805001

3.0981805001

3.0981805001

3.0981806001

3.0981806001

3.0981806001

Frame Nut - IPS / PIP (Solvent) Vee Thread N/A 7.00

57500090 N/A N/A 8.2557500096 N/A 8.25

57500096

Frame Nut - IPS / PIP (Solvent) Acme Thread N/A 7.00

57500090 N/A N/A 8.2557500091 N/A 8.25

57500091

Security Pin - IPS / PIP (Solvent) N/A 0.452673 N/A N/A 0.45

2673 N/A 0.452673

Redi-Set Rings - Concrete Pipe 8.2495003008

8.2495004008

8.2495005008 N/A N/A N/A 9.27

95008012


56

PARTVALVE SIZE

10" 12" 14" 15" x 14" 16" 18" 20"

Frame - Concrete Pipe Vee Thread 47.3840010003

53.5640012003

81.3740014003 N/A Call For Quote



40020003

Frame - Concrete Pipe Acme Thread

47.3840010013

53.5640012013




40020013

Frame - Type 4 Pipe (Epoxy) Vee Thread

55.6240010004

83.4340012004 N/A 141.11

40014152 N/A Call For Quote40018004

Call For Quote40020004

Frame - Type 4 Pipe (Epoxy) Acme Thread

55.6240010014

83.4340012014 N/A 141.11



Frame - IPS (Solvent) Vee Thread

99.0040310004

112.0040312004 N/A N/A N/A N/A N/A

Frame - IPS (Solvent) Acme Thread

99.0040310003

112.0040312003 N/A N/A N/A N/A N/A

Frame - PIP (Solvent) Vee Thread

99.0040310007

112.0040312007 N/A N/A N/A N/A N/A

Frame - PIP (Solvent) Acme Thread

99.0040310005

112.0040312005 N/A 221.00

40315004 N/A N/A N/A

Cover Complete - Vee Thread, SS (Includes Cover, Gasket, and Screw Complete)

78.7841510002

112.8641512002

149.9541514002

149.9541514002




Cover Complete - Acme Thread, SS (Includes Cover, Gasket, and Screw Complete)

78.7841510014

112.8641512017

149.9541514012

149.9541514012

208.8941516022




56.6541212001

101.9741214001

101.9741214001





8.2443512001

12.3643514001

12.3643514001




Screw Complete - Vee Thread, SS (Includes Screw, Nut, & Washer)

52.5243010002

52.5243010002

Call For Quote

43014001

Call For Quote

43014001




Screw Complete - Acme Thread, SS (Includes Screw, Nut, & Washer)

52.5243010011

52.5243010011

58.9343014011

58.9343014011

89.1043016016




47.2242510006

47.2242510006 N/A N/A N/A N/A N/A

Screw Only - Stainless Steel Acme Thread

47.2242510012

47.2242510012

51.1042514011

51.1042514011

62.1142516016 N/A N/A

Screw Only - Bronze Vee Thread 51.5042510001

51.5042510001

63.8642514001

63.8642514001




Screw Only - Bronze Acme Thread 51.5042510010

51.5042510010

63.8642514010

63.8642514010

88.5842516015




5.1580207001

5.1580208009

5.1580208009




Cover Nut - Acme Thread 5.1580207010

5.1580207010

5.1580208011

5.1580208011





3.5481807001

4.1281808010

4.1281808010




Frame Nut - IPS / PIP (Solvent) Vee Thread

9.2557500097

9.2557500097 N/A N/A N/A N/A N/A

Frame Nut - IPS / PIP (Solvent) Acme Thread

9.2557500092

9.2557500092 N/A 10.00

57500093 N/A N/A N/A

Security Pin - IPS / PIP (Solvent) 0.452673

0.452673 N/A 0.45

2673 N/A N/A N/A

Redi-Set Rings - Concrete Pipe 13.3995010014 N/A N/A N/A N/A N/A N/A

RED TOP OVERFLOW VALVES REPLACEMENT PARTSRE

D TO

P VA

LVE

PART

S


57PASTURE VALVES

PASTURE OVERFLOW VALVES

VALVE SIZE PIPE STYLE WT. (LBS.) VEE THREAD BRONZE SCREW ACME THREAD BRONZE SCREW

4”

CONCRETE 3 Call For Availability Call For Availability

TYPE 4 (EPOXY) 3 Call For Availability Call For Availability

IPS (SOLVENT) 4 Call For Availability Call For Availability

6”

CONCRETE 7 Call For Availability Call For Availability

TYPE 4 (EPOXY) 7 Call For Availability Call For Availability

IPS (SOLVENT) 8 Call For Availability Call For Availability

PIP (SOLVENT) 8 Call For Availability Call For Availability

8”

CONCRETE 11 N/A 111.00701608010

TYPE 4 (EPOXY) 11 N/A 111.00701608020

IPS (SOLVENT) 13 139.00701608055

139.00701608054

PIP (SOLVENT) 13 139.00701608056

139.00701608057

10”

CONCRETE 16 N/A 128.00701610010

TYPE 4 (EPOXY) 16 N/A 128.00701610020

IPS (SOLVENT) 20 186.00701610055

186.00701610054

PIP (SOLVENT) 20 186.00701610056

186.00701610057

12”

CONCRETE 22 N/A 160.00701612010

TYPE 4 (EPOXY) 22 N/A 160.00701612020

IPS (SOLVENT) 27 202.00701612055

202.00701612054

PIP (SOLVENT) 27 202.00701612056

202.00701612057

Notes: Type 4 is designed for Low Head 100 ft. PIP pipe

PASTURE VALVES

Waterman's “Pasture” design features a flush, key operated, self-cleaning stem, for use in areas where livestock are present. Operating key sold separately.


58 PASTURE OVERFLOW VALVES PARTSPA

STUR

E VA

LVES

PAR

TS

PART4” 6” 8” 10” 12”


18.5440004003 N/A N/A N/A N/A

Frame - Concrete Pipe Acme Thread N/A 37.08

4000601339.14

4000801347.38

4001001353.56

40012013


19.5740004004 N/A N/A N/A N/A

Frame - Type 4 Pipe (Epoxy) Acme Thread N/A 37.08

4000601446.35

4000801455.62

4001001483.43

40012014

Cover Complete - Vee Thread, SS(Includes Cover, Gasket, & Screw Complete)

50.4741504003 N/A N/A N/A N/A

Cover Complete - Acme Thread, SS(Includes Cover, Gasket, & Screw Complete) N/A 58.71

4150601367.98

41508013112.2741510013

122.5741512013


29.8741206003

39.1441208003

54.5941210003

64.8941212003


5.1543506001

6.0643508001

7.2143510001

8.2443512001

Screw Complete - Vee Thread, SS(Includes Screw, Nut, & Washer)

29.8743005003 N/A N/A N/A N/A

Screw Complete - Acme Thread, SS(Includes Screw, Nut, & Washer) N/A 37.08

4300601337.08

4300601357.68

4301001357.68

43010013


20.6042505003

32.9642506003

32.9642506003

51.5042510003 N/A

Screw Only - Bronze Acme Thread N/A 32.96

4250601332.96

4250601351.50

4251001351.50

42510013

Cover Nut - Bronze Vee Thread

4.1280205001

4.1280206001

4.1280206001

5.1580207001

5.1580207001

Cover Nut - Bronze Acme Thread N/A 4.12

802060104.12

802060105.15

802070105.15

80207010


3.0981806001

3.0981806001

3.5481807001

3.5481807001

Valve Key - Standard 8.2442510100

8.2442510100

8.2442510100

8.2442510100

8.2442510100

Valve Key - 4’ Spinner 18.5442512100

18.5442512100

18.5442512100

18.5442512100

18.5442512100

Notes: For IPS/PIP style parts, see Red Top Overflow Valve Parts list


59SUNSHINE VALVES

VALVE SIZE PIPE STYLE

WT. (LBS.)



6"

CONCRETE 6.5 62.00701406004

62.00701406011

TYPE 4 (EPOXY) 7 74.00701406002

74.00701406021

IPS (SOLVENT) 8 101.00701406055

101.00701406057

PIP (SOLVENT) 8 101.00701406056

101.00701406058

8"

CONCRETE 10 84.00701408004

84.00701408011

TYPE 4 (EPOXY) 10 90.00701408002

90.00701408021

IPS (SOLVENT) 13 126.00701408055

126.00701408057

PIP (SOLVENT) 13 126.00701408056

126.00701408058

SUNSHINE OVERFLOW VALVES

Concrete Type 4 (Plastic Pipe, Epoxy Fit)

Solvent Weld (IPS/PIP) Water dispersal Sunshine

10"

CONCRETE 15 108.00701410004

108.00701410011

TYPE 4 (EPOXY) 15 123.00701410002

123.00701410021

IPS (SOLVENT) 20 178.00701410058

178.00701410057

PIP (SOLVENT) 20 178.00701410056

178.00701410059

12"

CONCRETE 21 150.00701412004

150.00701412011

TYPE 4 (EPOXY) 21 174.00701412002

174.00701412021

IPS (SOLVENT) 27 206.00701412055

206.00701412057

PIP (SOLVENT) 27 206.00701412056

206.00701412058

Notes: Type 4 is designed for Low Head 100 ft. PIP pipe. Bronze Screw available – Call for Quote


60 SUNSHINE OVERFLOW VALVE REPLACEMENT PARTS SU

NSHI

NE V

ALVE

S PA

RTS

PARTVALVE SIZE

3 ½" 4" 5" 5" x 6" 6" 6 ½" 8"


17.5140003003

18.5440004003

37.0840005003 N/A 37.08

4000600337.08

4000700339.14

40008003

Frame - Concrete Pipe Acme Thread N/A N/A N/A N/A 37.08

4000601337.08

4000701339.14

40008013

Frame - Type 4 Pipe (Epoxy) Vee Thread N/A 19.57

4000400431.93

4000500431.93

4000500433.99

40006004 N/A 46.3540008004

Frame - Type 4 Pipe (Epoxy) Acme Thread N/A N/A N/A N/A 37.08

40006014 N/A 46.3540008014

Frame - IPS (Solvent) Vee Thread N/A 38.00

40304003 N/A N/A 51.0040306005 N/A 75.00

40308004

Frame - IPS (Solvent) Acme Thread N/A N/A N/A N/A 51.00

40306004 N/A 75.0040308003

Frame - PIP (Solvent) Vee Thread N/A N/A N/A N/A 51.00

40306007 N/A 75.0040308007

Frame - PIP (Solvent) Acme Thread N/A N/A N/A N/A 51.00

40306006 N/A 75.0040308005

Cover Complete - Vee Thread, SS (Includes Cover, Gasket, & Screw Complete) N/A 35.03

41504005 N/A N/A 47.1341506004 N/A 63.46

41508003

Cover Complete - Acme Thread, SS (Includes Cover, Gasket, & Screw Complete) N/A N/A N/A N/A 47.13

41506015 N/A 63.4641508016

Cover Packed N/A 11.3341204002 N/A N/A 17.51

41206002 N/A 23.1841208002


4.1243504001

5.1543505001

5.1543505001

5.1543506001

5.1543507001

6.0643508001


17.5743005004

17.5743005004

21.2943005005

21.2943005005

27.2743006002

27.2743006002

27.2743006002

Screw Complete - Acme Thread, SS (Includes Screw, Nut, & Washer) N/A N/A N/A N/A 27.27

4300601127.27

4300601127.27

43006011


15.1542505006

15.1542505006

18.8542505004

18.8542505004

24.2442506002

24.2442506002

24.2442506002

Screw Only - Stainless Steel Acme Thread N/A N/A N/A N/A 24.24

4250601124.24

4250601124.24

42506011


17.5142505001

17.5142505001

21.6342505002

21.6342505002

28.8442506001

28.8442506001

28.8442506001

Screw Only - Bronze Acme Thread N/A N/A N/A N/A 28.84

4250601028.84

4250601028.84

42506010


4.1280205001

4.1280205001

4.1280205001

4.1280206001

4.1280206001

4.1280206001

Cover Nut - Acme Thread N/A N/A N/A N/A 4.1280206010

4.1280206010

4.1280206010


3.0981805001

3.0981805001

3.0981805001

3.0981806001

3.0981806001

3.0981806001

Frame Nut - IPS / PIP (Solvent) Vee Thread N/A 7.00

57500090 N/A N/A 8.2557500096 N/A 8.25

57500096

Frame Nut - IPS / PIP (Solvent) Acme Thread N/A 7.00

57500090 N/A N/A 8.2557500091 N/A 8.25

57500091

Security Pin - IPS / PIP (Solvent) N/A 0.452673 N/A N/A 0.45

2673 N/A 0.452673

Redi-Set Rings - Concrete Pipe 8.2495003008

8.2495004008

8.2495005008 N/A N/A N/A 9.27

95008012


61SUNSHINE OVERFLOW VALVE REPLACEMENT PARTS

PARTVALVE SIZE

10" 12" 14" 15" x 14" 16" 18" 20"


47.3840010003

53.5640012003




40020003

Frame - Concrete Pipe Acme Thread

47.3840010013

53.5640012013




40020013


55.6240010004

83.4340012004 N/A 141.11




55.6240010014

83.4340012014 N/A 141.11



Frame - IPS (Solvent) Vee Thread

99.0040310004

112.0040312004 N/A N/A N/A N/A N/A

Frame - IPS (Solvent) Acme Thread

99.0040310003

112.0040312003 N/A N/A N/A N/A N/A

Frame - PIP (Solvent) Vee Thread

99.0040310007

112.0040312007 N/A N/A N/A N/A N/A

Frame - PIP (Solvent) Acme Thread

99.0040310005

112.0040312005 N/A 221.00

40315004 N/A N/A N/A

Cover Complete - Vee Thread, SS (Includes Cover, Gasket, & Screw Com-plete)

88.3941510004

122.3941512004

149.9541514002

149.9541514002 N/A N/A N/A

Cover Complete - Acme Thread, SS (Includes Cover, Gasket, & Screw Complete)

88.3941510016

122.3941512005

156.3841514016

156.3841514016 N/A N/A N/A


49.9741212004

87.8241214003

87.8241214003 N/A N/A N/A


8.2443512001

12.3643514001

12.3643514001





52.5243010002

52.5243010002

Call For Quote

43014001

Call For Quote

43014001




Screw Complete - Acme Thread, SS (Includes Screw, Nut, & Washer)

52.5243010011

52.5243010011

58.9343014011

58.9343014011

89.1043016016




47.2242510006

52.9842510007 N/A N/A N/A N/A N/A


52.9842510016

52.9842510016

51.1042514011

51.1042514011

62.1142516016 N/A N/A


51.5042510001

51.5042510001

63.8642514001

63.8642514001




Screw Only - Bronze Acme Thread

51.5042510010

51.5042510010

63.8642514010

63.8642514010

88.5842516015




5.1580207001

5.1580208009

5.1580208009




Cover Nut - Acme Thread 5.1580207010

5.1580207010

5.1580208011

5.1580208011





3.5481807001

4.1281808010

4.1281808010




Frame Nut - IPS / PIP (Solvent) Vee Thread

9.2557500097

9.2557500097 N/A N/A N/A N/A N/A

Frame Nut - IPS / PIP (Solvent) Acme Thread

9.2557500092

9.2557500092 N/A 10.00

57500093 N/A N/A N/A

Security Pin - IPS / PIP (Solvent) 0.452673

0.452673 N/A 0.45

2673 N/A N/A N/A

Redi-Set Rings - Concrete Pipe 13.3995010014 N/A N/A N/A N/A N/A N/A

SUNSHINE VALVES PARTS


62 RED TOP ALFALFA VALVE WITH SOLID ARCH FRAME

Notes: Type 4 is designed for Low Head 100 ft. PIP pipe.

VALVE SIZE

PIPE STYLE

WT. (LBS.)

SOLID ARCH FRAME



VEE THREAD BRONZE SCREW

ACME THREAD BRONZE SCREW

8"CONCRETE 22 N/A 164.00

702008011184.00

702008001184.00

702008010

TYPE 4 (EPOXY) 24 N/A 167.00

702008015187.00

702008004187.00

702008014


702010011 N/A 219.00702010010

TYPE 4 (EPOXY) 28 N/A 231.00

702010015 N/A 251.00702010014

12"CONCRETE N/A N/A N/A N/A

TYPE 4 (EPOXY) 39 N/A 242.00

702012015 N/A 262.00702012014

RED TOP ALFALFA SOLID ARCH FRAME PARTS

PARTVALVE SIZE

8" 10" 12"

Frame - Concrete Pipe Vee Thread 97.0040008007

103.0040010007 N/A

Frame - Concrete Pipe Acme Thread 97.0040008017

103.0040010017 N/A

Frame - Type 4 Pipe (Epoxy) Vee Thread 100.9440008008

125.6640010008

155.5340012008

Frame - Type 4 Pipe (Epoxy) Acme Thread 100.9440008018

125.6640010018

155.5340012018

Cover Complete - Vee / Bronze (Includes Cover, Gasket, & Screw Complete)

97.8541508011

121.5441510011

138.0241512011

Cover Complete - Acme / Stainless (Includes Cover, Gasket, & Screw Complete)

88.1141508023

105.9341510024

112.8641512023

Cover Complete - Acme / Bronze (Includes Cover, Gasket, & Screw Complete)

97.8541508021

121.5441510021

138.0241512021


57.6841210011

69.0141212011


7.2143510001

8.2443512001

Screw Complete - Vee / Bronze (Includes Screw, Nut, & Washer)

60.7743008004

74.1643010005

78.2843012004

Screw Complete - Acme / Stainless (Includes Screw, Nut, & Washer)

49.7543008015

51.4843010015

51.4843012015

Screw Complete - Acme / Bronze (Includes Screw, Nut, & Washer)

60.7743008014

74.1643010014

78.2843012014

Screw Only - Stainless Steel Vee Thread N/A N/A N/A

Screw Only - Stainless Steel Acme Thread 32.8442508015

43.8942510015

49.4542512015

Screw Only - Bronze Vee Thread 53.5642508004

64.8942510005

69.0142512004

Screw Only - Bronze Acme Thread 53.5642508014

64.8942510014

69.0142512014

Brass Cover Nut - Vee Thread 5.1580208009

6.1880208002

6.1880209001

Brass Cover Nut - Acme Thread 5.1580208010

6.1880208012

6.1880209010


4.1281810010

4.1281811010

ALFA

LFA

VALV

ES


63ALFALFA VALVES

Notes: Type 4 is designed for Low Head 100 ft. PIP pipe. 16" Valve and above is Special Order only

VALVE SIZE

PIPE STYLE

WT. (LBS.)

REMOVABLE ARCH FRAME






702208011190.00

702208001190.00

702208010

TYPE 4 (EPOXY) 29 N/A 199.00702208041 N/A 209.00

702208040


702210011 N/A 238.00702210010

TYPE 4 (EPOXY) 48 N/A 254.00702210041 N/A 264.00

702210040


702212011245.00

702212001245.00

702212010

TYPE 4 (EPOXY) 58 N/A 294.00702212041

324.00702212004

324.00702212040


702214011385.00

702214001385.00

702214010

TYPE 4 (EPOXY) N/A N/A N/A N/A

15" x 14" (15" Pipe

Size)

CONCRETE N/A N/A N/A N/A

TYPE 4 (EPOXY) 78 N/A 402.00702215155 N/A 420.00

702215154


702216011398.00

702216001398.00

702216010


18"CONCRETE 74 N/A N/A 496.00

702218001496.00

702218010

TYPE 4 (EPOXY) 101 N/A N/A 684.00702218004 N/A

20"CONCRETE 91 N/A N/A N/A 765.00

702220010

TYPE 4 (EPOXY) 111 N/A N/A N/A 908.00702220040

24"CONCRETE 135 N/A N/A N/A 1,650.00

702224010

TYPE 4 (EPOXY) 149 N/A N/A N/A 1,675.00702224040

30"CONCRETE 245 N/A N/A N/A 2,750.00

702230010


36"CONCRETE 530 N/A N/A N/A 4,432.00

702236010


RED TOP ALFALFA VALVE WITH REMOVABLE ARCH

Alfalfa

ALFALFA RISER VALVES WITH REMOVABLE ARCH

Alfalfa Valves are commonly used with the Waterman Universal Hydrant for connection of portable surface pipe. They are also applied where an extra heavy duty riser valve is desired. A fully machined outer rim is provided to fit and make a watertight seal with our hydrant. The larger diameter screw and brass nut is designed to provide resistance to higher flow. Arch and nut are field replaceable.


64RE

MOV

ABLE

FRA

ME

PARTVALVE SIZE

8" 10" 12" 14" 15" x 14"

Frame - Concrete Pipe 97.8540008051

119.4840010051

151.4140012051

159.6540014051 N/A

Frame - Type 4 Pipe (Epoxy) 97.8540008054

119.4840010054

151.4140012054 N/A 189.52

40015154

Arch - Vee Thread 37.0844208001

38.1144208120

46.3544210120

56.6544214001

56.6544214001

Arch - Acme Thread 37.0844208010

38.1144208121

46.3544210121

56.6544214010

56.6544214010

Cover Complete - Vee / Bronze (Includes Cover, Gasket, & Screw Com-plete)

97.8541508011

121.5441510011

138.0241512011

201.8841514011

201.8841514011

Cover Complete - Acme / Stainless (Includes Cover, Gasket, & Screw Com-plete)

88.1141508023

105.9341510024

112.8641512023

149.9541514022

149.9541514022

Cover Complete - Acme / Bronze (Includes Cover, Gasket, & Screw Com-plete)

97.8541508021

121.5441510021

138.0241512021

201.8841514021

201.8841514021


57.6841210011

69.0141212011

120.5141214011

120.5141214011


7.2143510001

8.2443512001

12.3643514001

12.3643514001

Screw Complete - Vee / Bronze (Includes Screw, Nut, & Washer)

60.7743008004

74.1643010005

78.2843012004

95.7943016005

95.7943016005


49.7543008015

51.4843010015

51.4843012015

89.1043016016

89.1043016016


60.7743008014

74.1643010014

78.2843012014

95.7943016015

95.7943016015

Screw Only - Stainless Steel Vee Thread N/A N/A N/A N/A N/A


32.8442508015

43.8942510015

49.4542512015




53.5642508004

64.8942510005

69.0142512004

88.5842516005

88.5842516005


53.5642508014

64.8942510014

69.0142512014

88.5842516015

88.5842516015

Tee Handle Bar - Bronze Screw 10.3050005006

11.3350005007

11.3350005007

12.3650005008

12.3650005008

Brass Cover Nut - Vee Thread 5.1580208009

6.1880208002

6.1880209001

6.1880210001

6.1880210001


6.1880208012

6.1880209010

6.1880210010

6.1880210010


4.1281810010

4.1281811010

4.1281812010

4.1281812010

Eccentric Latch 9.27101589

9.27101589

9.27101589

9.27101589

9.27101589

Rivet 3.091254

3.091254

3.091258

3.091258

3.091258

ALFALFA REMOVABLE ARCH - REPLACEMENT PARTS


65SUNSHINE ALFALFA VALVE

SUNSHINE ALFALFA SOLID ARCH FRAME PARTS

Notes: Type 4 is designed for Low Head 100 ft. PIP pipe.

VALVE SIZE

PIPE STYLE

WT. (LBS.)

SOLID ARCH FRAME






TYPE 4 (EPOXY) 16 N/A 145.00702406015 N/A 155.00

702406014


TYPE 4 (EPOXY) 24 N/A 157.00702408015 N/A 168.00

702408014


TYPE 4 (EPOXY) 28 N/A 203.47702410015 N/A 217.00

702410014


TYPE 4 (EPOXY) 39 N/A 236.00702412015 N/A 245.00

702412014

PARTVALVE SIZE

6" 8" 10" 12"


86.5240006034

105.0640008034

132.8740010034

161.7140012034

Cover Complete - Acme / Stainless (Includes Cover, Gasket, & Screw Com-plete)

91.0041506016

86.8741508024

121.5441510023

112.8641512015

Cover Complete - Acme / Bronze (Includes Cover, Gasket, & Screw Com-plete)

93.7341506014

97.8541508022

121.5441510020

138.0241512012


48.5241208022

59.6541210022

71.9841212002


7.2143508002

7.2143510001

8.2443512001


49.7543008015

49.7543008015

51.4843010015

51.4843012015


60.7743008014

60.7743008014

74.1643010014

78.2843012014


32.8442508015

32.8442508015

43.8942510015

49.4542512015


53.5642508014

53.5642508014

64.8942510014

69.0142512014


5.1580208010

6.1880208012

6.1880209010


4.1281808010

4.1281810010

4.1281810010

SUNSHINE ALFALFA VALVE – SOLID ARCH FRAME


66SU

NSHI

NE A

LFAL

FA V

ALVE

Notes: Type 4 is designed for Low Head 100 ft. PIP pipe. 16" Valve and above is Special Order only

VALVE SIZE

PIPE STYLE

WT. (LBS.)

REMOVABLE ARCH FRAME






TYPE 4 (EPOXY) 29 N/A 196.00

702608041 N/A N/A


702610011 N/A 215.00702610010

TYPE 4 (EPOXY) 48 N/A 234.00

702610041 N/A 239.00702610040


TYPE 4 (EPOXY) 58 N/A 264.00

702612041 N/A 269.00702612040


702614010


15" x 14" (15" Pipe Size)

CONCRETE N/A N/A N/A N/A


702615154


702616010




702618040



702620040

SUNSHINE ALFALFA VALVE - REMOVABLE ARCH


67SUNSHINE ALFALFA VALVE

SUNSHINE ALFALFA REMOVABLE ARCH PARTS

DRAWBANDS (sold in bundles of 10 pcs.)

PARTVALVE SIZE

8" 10" 12" 14" 15" x 14" 16" 18" 20"

Frame - Concrete Pipe 97.8540008051

119.4840010051

151.4140012051

159.6540014051 N/A 169.33

40016051378.2240018051 N/A

Frame - Type 4 Pipe (Epoxy) 97.8540008054

119.4840010054

151.4140012054 N/A 189.52

40015154 N/A 378.2240018054

640.2540020054

Arch - Acme Thread 45.8344208002

47.1044210002

57.2944212002

70.0244214002

70.0244214002

105.0644216010

116.1844218010

140.9044220010

Cover Complete - Acme / Stainless (Includes Cover, Gasket, and Screw Complete)

86.8741508024

101.2841510025

112.8641512015 N/A N/A N/A N/A N/A

Cover Complete - Acme / Bronze (Includes Cover, Gasket, and Screw Complete)

97.8541508022

121.5441510022

138.0241512012

200.8541514015

200.8541514015

230.7241516012

285.3141518012

321.3641520012


59.6541210022

71.9841212002

147.6841214002

147.6841214002

153.3841216002

187.8741218002

212.5941220002


7.2143510001

8.2443512001

12.3643514001

12.3643514001

15.4543516001

20.6043518001

27.8143520001


49.7543008015

51.4843010015

51.4843012015 N/A N/A N/A N/A N/A


60.7743008014

74.1643010014

78.2843012014

95.7943014012

95.7943014012

114.3343020014

116.3943020012

116.3943020012


32.8442508015

43.8942510015

49.4542512015 N/A N/A N/A N/A N/A


53.5642508014

64.8942510014

69.0142512014

88.5842516015

88.5842516015

97.8542520014

122.3642520012

122.3642520012

Tee Handle Bar - Bronze Screw 10.3050005006

11.3350005007

11.3350005007

12.3650005008

12.3650005008

12.3650005008

12.3650005008

12.3650005008


6.1880208012

6.1880209010

6.1880209010

6.1880209010

6.1880210010

6.1880210010

6.1880210010


4.1281810010

4.1281811010

4.1281811010

4.1281811010

4.1281812010

4.1281812010

4.1281812010

Eccentric Latch 9.27101589

9.27101589

9.27101589

9.27101589

9.27101589

9.27101589

9.27101589

9.27101589

Rivet 3.091254

3.091254

3.091258

3.091258

3.091258

3.091258

3.091257

3.091257

SUNSHINE ALFALFA VALVE – REMOVABLE ARCH – REPLACEMENT PARTS

Standard Draw Bands

Oversized Draw Bands

OD Size Item Price Item Price

4” 90000300 10.30 900003001 10.30

6” 90000310 10.50 900003101 10.50

8” 90000320 11.00 900003201 11.00

10” 90000330 11.30 900003301 11.30

12” 90000340 11.50 900003401 11.50

14” 90000345 20.00 900003451 20.00

15” 90000350 21.00 900003501 21.00

16” 90000360 23.00 N/A

18” 90000370 40.00 N/A


68UN

IVER

SAL

HYDR

ANT

HYDRANT SIZE (BODY x OUTLET) PIPE STYLE SINGLE OUTLET WT.

(LBS.) DOUBLE OUTLET WT. (LBS.) SINGLE COMBINATION WT.

(LBS.)

6" x STUBCENTER TENSION N/A N/A N/A

HOOK TYPE 354.00703220006 14 N/A N/A

6" x 6"CENTER TENSION N/A N/A N/A

HOOK TYPE 401.00703210606 16 N/A N/A

8" x STUBCENTER TENSION 475.00

703320008 19 N/A 517.00703420008 21

HOOK TYPE 475.00703220008 17 N/A N/A

8" x 6"CENTER TENSION 402.00

703310806 22 N/A 517.00703410806 24

HOOK TYPE 402.00703210806 20 N/A N/A


703310808 23 N/A 517.00703410808 25

HOOK TYPE 402.00703210808 21 N/A N/A


703320010 19 N/A 572.00703420010 21

HOOK TYPE 539.00703220010 18 N/A N/A


703311006 22 N/A 598.00703411006 25

HOOK TYPE 564.00703211006 20 N/A N/A


703311008 24 N/A 598.00703411008 27

HOOK TYPE 551.43703211008 22 N/A N/A


703311010 32 N/A 598.00703411010 39

HOOK TYPE 551.43703211010 30 N/A N/A

UNIVERSAL HYDRANT

UNIVERSAL HYDRANT

Hydrant

• Center tension or hook type connection to alfalfa riser valve

• Outlet compatible with pierce-style gasket pipe


69UNIVERSAL HYDRANT

UNIVERSAL HYDRANTHYDRANT SIZE

(BODY x OUTLET) PIPE STYLE SINGLE OUTLET WT. (LBS.) DOUBLE OUTLET WT.

(LBS.) SINGLE COMBINATION WT. (LBS.)


703320012 27 838.00703330012 42 590.00

703420012 35

HOOK TYPE 554.00703220012 26 838.00

703230012 40 N/A


703311206 30 1,055.00703331206 45 624.00

703411206 37

HOOK TYPE 607.00703211206 28 1,055.00

703231206 43 N/A


703311208 32 1,055.00703331208 46 624.00

703411208 39

HOOK TYPE 594.00703211208 30 1,055.00

703231208 44 N/A


703311210 33 1,055.00703331210 47 734.00

703411210 40

HOOK TYPE 594.00703211210 31 1,055.00

703231210 47 N/A


703311212 34 1,055.00703331212 47 734.00

703411212 41

HOOK TYPE 634.59703211212 32 1,055.00

703231212 45 N/A

14" x STUBCENTER TENSION 1,044.00

703320014 47 1,259.00703330014 56 1,091.00

703420014 54

HOOK TYPE 1,044.00703220014 45 1,259.00

703230014 54 N/A

14" x 8"CENTER TENSION 1,075.00

703311408 49 1,375.00703331408 58 1,109.00

703411408 56

HOOK TYPE 1,075.00703211408 47 1,375.00

703231408 56 N/A


703311410 51 1,375.00703331410 59 1,109.00

703411410 58

HOOK TYPE 1,053.36703211410 49 1,375.00

703231410 59 N/A


703311412 52 1,756.00703331412 59 N/A

HOOK TYPE 1,314.72703211412 50 1,756.00

703231412 57 N/A

14" x 15" x STUBCENTER TENSION 1,340.00

703320015 55 1,756.00703330015 60 1,375.00

703420015 60

HOOK TYPE 1,340.00703220015 53 1,756.00

703230015 58 N/A

UNIVERSAL HYDRANT


70UN

IVER

SAL

HYDR

ANT

PART

S

Notes: 1 Please advise if your hydrant has a raised or flat top

PARTVALVE SIZE

6" 8" 10" 12" 14"

Body - Single Outlet 264.0098206002

362.0098208002

430.0098210002

477.0098212002

595.0098214002

Body - Double Outlet N/A N/A N/A 632.0098212003

824.0098214003

Bottom Gasket 27.0043506032

30.0043508032

33.0043510032

38.0043512032

46.0043514032

O-Ring Seals (ea.) 2.5043200212

2.5043200212

2.5043200212

2.5043200212

2.5043200212

Center Tension Screw N/A 60.0098208000

62.0098210000

67.0098212005

75.0098214000

Center Tension Clutch - Steel N/A 32.5098200008

32.5098200008

32.5098200008

32.5098200008

Clutch Bolt w/ Nut 5.0098200009

5.0098200009

5.0098200009

5.0098200009

5.0098200009

Center Tension Lift Nut Assembly (Includes Handle, Nut, Pin, and Washer) N/A 60.00

9820001260.00

9820001260.00

9820001260.00

98200012

Center Tension Lift Handle N/A 14.0098200004

14.0098200004

14.0098200004

14.0098200004

Center Tension Lift Nut N/A 42.0098200013

42.0098200013

42.0098200013

42.0098200013

Center Tension Lift Pin N/A 5.0098200015

5.0098200015

5.0098200015

5.0098200015

Center Tension Brass Washer N/A 4.0098200010

4.0098200010

4.0098200010

4.0098200010

Hook Stem - Aluminum 36.0098201007

48.0098203007

48.0098203007

48.0098203007

54.0098204007

Hook Clutch - Aluminum 20.0098299001

20.0098299001

20.0098299001

20.0098299001

20.0098299001

Side Hook Assembly (Incl. Hook, Pin, Spring, Washer, & Stirrup)

27.0098200016

27.0098200016

27.0098200016

27.0098200016

27.0098200016

Side Hook 13.0098200017

17.0098201017

21.0098202017

21.0098202017

21.0098202017

Hook Handle 7.0098200019

7.0098200019

7.0098200019

7.0098200019

7.0098200019

Hook Pin 2.002699

2.002699

2.002699

2.002699

2.002699

Hook Spring1 3.0098200021

3.0098200021

3.0098201021

3.5098202021

3.5098202021

Hook Washer 1.2598200018

1.2598200018

1.2598200018

1.2598200018

1.2598200018

Hook Stirrup - Brass Nut 10.0098200022

10.0098200022

10.0098200022

10.0098200022

10.0098200022

Hook Stirrup - Stainless Steel Nut 9.0098200025

9.0098200025

9.0098200025

9.0098200025

9.0098200025

Weld-On Hook Lug 18.0098200023

18.0098200023

18.0098200023

18.0098200023

18.0098200023

Handwheel 38.1198200000

38.1198200000

38.1198200000

38.1198200000

38.1198200000

UNIVERSAL HYDRANT PARTS


71

AV-150 AIR RELIEF VALVE

AV-150 DUAL THREAD VALVE (THREADED BOTH INLET AND OUTLET)

AV-150 AIR VALVE PARTS

VALVE SIZE NPT

WT. (LBS.) PRICE BOX

QTY

1 ½" 1 28.00704800001 10

2" 2 32.00704801000 10

2" Classic Flat Top 2.2 26.20704801005 10

3" 3 68.00704802001 10

4" 6 132.00704804001 6

VALVE SIZE NPT

WT. (LBS.) PRICE BOX

QTY

2" 2 49.00704801010 10

3" 3 116.00704802010 10

4" 6 173.00704804010 6

PARTVALVE SIZE

1 ½" 2" 3" 4"

Baffle N/A 10.3046001048

13.3946003048

14.4246004048

Float Ball 12.3647048150

15.4547048212

17.5147048321

19.5747048400

Seat Seal 3.0943201047

4.1243201049

6.1843203048

6.1843204048

AIR RELIEF VALVES - ALUMINUM

AV-150

SERIES AV-150 ALUMINUM BODY AIR VENT uses a hard, precision ground, inert solid plastic float ball which prevents “sticking” in the closed position. The float ball seats against a precision o-ring providing a tight seal at very low pressures where other vents often leak. Rated to 150 psi on the 1.5" and 2" and 100 psi on the 3" and 4". The aerodynamic “air-flow” design of a high strength alloy aluminum body and full baffle assures maximum vent capacity without premature closing.

AIR RELIEF VALVES


72

SERIES CR-101 ALUMINUM BODY CONTINUOUS ACTING AIR VENT AND VACUUM RELIEF VALVE continually provides high-volume air and vacuum protection, insures full line capacity, and conserves pump horsepower. It seals at pressures as low as 2 psi

AIR

RELI

EF V

ALVE

S

AVP-1 PLASTIC AIR RELIEF VALVE

CR-101 CONTINUOUS ACTING AIR RELIEF VALVE (RATED TO 150 PSI)

CR-101 HP CONTINUOUS ACTING AIR VALVE (RATED TO 300 PSI)

CR-101 AIR VALVE PARTS

VALVE SIZE WT. (LBS.) PRICE

1" 2 19.00704601001

2" 4 53.00704602001

3" 12 95.68704603001


2" 15 208.00705802010

3" 16 234.00705803010

4" 22 294.00705804010


2" 16 499.00705802020

3" 17 699.00705803020

4" 23 899.00705804020

PARTVALVE SIZE

2" 3" 4"

Base - Cast Iron 73.1340602058

90.6440603058

117.4240604058

Body - Aluminum 114.3340502058

138.0240503058

175.1040504058

Poppet Assembly (Includes Poppet, Guide, and Indicator Knob)

50.4745902058

55.6245903058

62.8345904058

Poppet 29.8745802058

32.9645803058

36.0545804058

Guide 12.3652502312

12.3652502312

12.3652502312

Indicator Knob 4.1251001001

4.1251001001

4.1251001001

Float Cylinder 57.6847002057

90.6447003058

90.6447003058

Baffle 6.1846002058

10.3046003058

12.3646004058

Stud & Nut (ea.) 4.122519

4.122519

4.122519

Body Gasket (O-Ring) 5.1543200001

5.1543505001

6.1843506002

AIR RELIEF VALVES

CR-101

High Pressure Model

AVP

NEW PRODUCT


73AIR RELIEF VALVES

CRP-8 CONTINUOUS ACTING AIR RELIEF VALVE

CRP-8 AIR VALVE PARTS

CRP-9 CONTINUOUS ACTING AIR RELIEF VALVE

VALVE SIZE NPT WT. (LBS.) PRICE

1" 1.5 69.36705900001

2" 5 134.64705900002

3" 12.5 188.70705900003

PARTVALVE SIZE

2" 3"

Base 29.8740602059

80.3440603059

Body 51.5040502059

60.771800455

Poppet 42.2345902059

43.2645903059

Indicator Knob 4.1251001001

4.1251001001

Float Ball 57.6847002058

90.6447003058

Baffle 8.2446002059

9.2746003059

Stainless Steel Bolt & Washer (ea.)

4.1281302001

4.1281302001

Base Gasket 4.1243501200

5.1543501300


2" 4 98.00705902000

AIR RELIEF VALVES

CRP-8

Waterman air vents protect irrigation and piping systems by releasing entrapped air as pipelines fill and providing vacuum relief when lines drain. Installation of proper air relief is essential to the proper operation and longevity of piping systems and the proper functioning of system pumps.

Installation of proper Waterman air vents can help prevent these issues: • Impedance of flow due to air obstruction, head losses. Inadequate flow to crops. • Water hammer and vacuum damage.• Corrosion and cavitation. • Danger to operators from air-blown parts


74PR

ESSU

RE R

ELIE

F VA

LVES

AA-6B RELIEF VALVE

AA-60D RELIEF VALVE (DIRECTIONAL OUTLET, THREADED)

AA-96B RELIEF VALVE (ALUMINUM BODY)

Notes: Model AA-60D is available as Factory Set only

VALVE SIZE PSI RANGE WT.(LBS.) FIELD SET FACTORY SET

2"

11 - 65 PSI 10 123.006001001

140.00706001001

66 - 120 PSI 10 123.006001002

140.00706001002

2 ½"11 - 65 PSI 10 N/A 148.00

706002001

66 - 120 PSI 10 N/A 148.00706002002

VALVE SIZE PSI RANGE WT. (LBS.) FIELD SET FACTORY SET

2"11 - 40 PSI 13 N/A 292.52

22002063

41 - 120 PSI 13 N/A 292.5222002064


3"

11 - 40 PSI 14 162.006003041

174.00706003041

41 - 100 PSI 18 162.006003101

174.00706003101

101 - 150 PSI 21 162.006003121

174.00706003121

4"

11 - 34 PSI 28 213.006004021

217.00706004021

35 - 60 PSI 33 213.006004041

217.00706004041

61 - 105 PSI 38 213.006004101

217.00706004101

106 - 150 PSI 42 213.006004121

217.00706004121


AA96 AA96CAA60DAA6 AA9C


75PRESSURE RELIEF VALVES

AA-96C RELIEF VALVE (COVERED)

AA-96D RELIEF VALVE (DIRECTIONAL OUTLET)

Notes: Model AA-96C is available as Factory Set only

Notes: Model AA-96D is available as Factory Set only

Model AA-96D has a Female Port


3"

11 - 40 PSI 16 N/A 203.00706003042

41 - 100 PSI 20 N/A 203.00706003102

101 - 150 PSI 23 N/A 233.00706003122

4"

11 - 34 PSI 35 N/A 255.00706004022

35 - 60 PSI 35 N/A 255.00706004042

61 - 105 PSI 40 N/A 262.00706004102

106 - 150 PSI 43 N/A 289.00706004122


3"

11 - 40 PSI 16 N/A 298.00706003043

41 - 100 PSI 20 N/A 298.00706003103

101 - 120 PSI 23 N/A 327.00706003123

4"

11 - 34 PSI 36 N/A 364.00706004023

35 - 60 PSI 36 N/A 364.00706004042

61 - 105 PSI 41 N/A 364.00706004103

106 - 120 PSI 44 N/A 405.00706004123



76PR

ESSU

RE R

ELIE

F VA

LVES

AA-9 RELIEF VALVE

AA SERIES PARTS

VALVE SIZE PSI RANGE WT. (LBS.) PRICE

6"

11 - 34 PSI 76 593.00706206022

35 - 80 PSI 76 750.00706206080

81 - 120 PSI 76 815.00706206120

PART AA-6 PARTS AA-96 PARTS AA-9 PARTS

2" 2 ½" 3" 4" 6"

Base 83.4340601060

83.4340602060

114.3340603061

123.6040604061

150.3840606062

Cover 50.4741003062

50.4741003062

53.5641003061

61.8041004061

186.4341006062

Cover Gasket (Set) 10.3043303062

10.3043303062

10.3043303061

15.4543304061

40.1743306062

Gasket Retainers w/ Screws 10.3043103062

10.3043103062

10.3043103061

11.3343104061

21.6343106062

O-Ring Seals (ea.) 3.0943200114

3.0943200114

3.0943200114

3.0943200114

3.0943200216

Spring Retainer N/A N/A 36.0557101060

36.0557101060

107.1257106062

Spring Guide Washer 3.0982005052

3.0982005052 N/A N/A N/A

Seal Wire 4.1264201001

4.1264201001

4.1264201001

4.1264201001

4.1264201001

Spring Cover w/ Drive Screws N/A N/A 49.4456503062

57.6856504062

88.5856506062

Guide Rod Nuts 4.1280306050

4.1280306050

4.1280306050

4.1280306050

4.1280306050

Notes: For AA-60D parts, see 2" AA-6 parts list



77CHECK VALVES

PC-30 CHECK VALVE PARTS

Notes: For Model PC-30-L (Exterior lever arm for manual by-pass) add $160.00 to the price listed above.

VALVE SIZE WT. (LBS.) I.D. GASKET FOR IPS O.D. GASKET FOR PIP SDR-35 GASKET

4" 15 335.00706804001

335.00706804010

335.00706804020

6" 23 393.00706806001

393.00706806010

393.00706806020

8" 32 502.00706808001

502.00706808010

502.00706808020

10" 53 809.00706810001

809.00706810010

809.00706810020

PC-30 CHECK VALVE

PARTVALVE SIZE

4" 6" 8" 10"

Body 338.8740504068

438.7840506068

479.9840508068

765.2940510068

Cover w/ Gasket (Flapper) 71.0741204068

107.1241206068

131.8441208068

194.6741210068

Cover Bolt 11.3380805200

11.3380805200

11.3380805200

11.3380805200

Hinge Arm 32.9645004068

45.3245006068

51.5045008068

60.7745010068

Hinge Pin 10.3082505362

12.3682505425

12.3682505425

13.3982505550

Hinge Bushing (ea.) 6.1883005071

6.1883005071

6.1883005071

6.1883005071

Hinge Plug w/ Grease Zerk (ea.) 7.2180005002

7.2180005002

7.2180005002

7.2180005002

Follow Ring (ea.) 15.4571104570220

31.9371121500020

36.0571104880020

52.5358510068

Ring Bolt (ea.) 5.1580802250

5.1580804300

5.1580805300

5.1580805300

IPS Pipe Seal Gasket (ea.) 21.6343504010

24.7243506010

25.7543508010

26.7843510010

PIP Pipe Seal Gasket (ea.) 20.6043504020

23.6943506020

24.7243508020

25.7543510020

SDR-35 Pipe Seal Gasket (ea.) 25.7543504030

25.7543506030

26.7843508030

28.8443510030

Hinge Torsion Spring 8.23102139

9.27105854

9.27105854

9.27105854

Bumper w/ Screw 4.1253501023

4.1253501023

4.1253501023

4.1253501023

Stainless Steel Washer (ea.) 3.091003

3.091003

3.091003

3.091003

CHECK VALVES

PC-30 IN-LINE SWING CHECK VALVE is constructed with a high strength cast-aluminum body and features a tight-sealing, nitrile rubber seat. Hinge pins are stainless steel and operate in non-metallic hinge bushings with lubrication fittings. Available in sizes 4" -10". Compression connection standard, flanged version optional.

PC-30

D-34 LOW PRESSURE DRAIN VALVE

SIZE PART # PRICE

¾" 706806316 17.51


78M

ISCE

LLAN

EOUS

PAR

TS

EMBEDDED VALVE EMBEDDED VALVE PARTS

Notes: 15" Dairy Flush Valves are double bladder

VALVE SIZE PRICE

12" Model DFV-E-CIP-PIP

For PIP Pipe Style (Solvent)

1,635.00704112001

12" Model DFV-E-CIP-IPS

For IPS Pipe Style (Solvent)

1,635.00704112010

15" Model DFV-E-4

For Type 4 Pipe Style (Epoxy)

2,023.00704115001

15" Model DFV-E-CIP-PIP

For PIP Pipe Style (Solvent)

2,790.00704115002

PARTVALVE SIZE

12" 15"

Cover 362.56107872

379.04109259

Bladder 357.41704100010

493.37704100011

Directional Gate 362.56107869

389.34107900

Bi-Directional Gate 362.56107887 N/A

Hose Guard 108.1571078751

108.1571078752

Gasket 8.2443512001

15.4543516001

DAIRY FLUSH VALVE

HYDRANT VALVE

HYDRANT VALVE PARTS

VALVE SIZE PRICE

12" Model DFV-M-4 With Manual Operator

944.00704212001

12" Model DFV-B-4 With Cushion Bladder Operator

2,890.00704212004

PARTVALVE SIZE

12"

Body 700.4040512042


Air Spring Bladder 357.41704100010

Bronze Stem 201.8842612042

Old Style 16" Stem 200.0042612043

Lift Nut 21.6380212042

Cotter Pin 5.202681

Retaining Nut 4.1280212001

Rubber Packing 8.2443512040

Handwheel 38.1198200000

Bolt On Nut Pocket 29.8793012000


79M

ISCELLANEOUS PARTS

TERMS AND CONDITIONS

ENTIRE AGREEMENTEach party agrees that all sales of goods (“Goods”) by Waterman Valve, LLC (“Seller”) to Buyer are governed by these Terms and Conditions of Sale (the “Terms and Conditions”) which supersede any other or inconsistent terms of Buyer or Seller. Each party agrees that the Terms and Conditions will also govern all sales of Goods to Buyer by any Waterman Valve, LLC subsidiary, affiliate or division, in which case such subsidiary, affiliate or division will be the “Seller” under this Agreement (unless otherwise agreed in writing by such subsidiary, affiliate or division). Buyer acknowledges that these Terms and Conditions are subject to change from time to time and the parties agree that each sale of Goods will be governed by the version of Terms and Conditions available online at http://watermanusa.com/terms-and-conditions/ at the time of acceptance by Seller of an order for such Goods. Terms and Conditions and the order for Goods from Buyer and agreed by Seller (“Order) or other contract documents to which they apply constitute the entire agreement between the parties with respect to Goods (“Agreement”). All references by Seller to Buyer’s specifications and similar requirements are only to describe Goods and work covered hereby and no warranties or other terms will have any force or effect. No other or inconsistent terms of Buyer, no modification, amendment or waiver to this Agreement and no cancellation, change or return of any Order under this Agreement will be binding on Seller until agreed in writing by Seller’s authorized representative. Buyer may not rely on any representation, promise or term not set forth herein and Seller expressly objects to and rejects all terms not contained in this Agreement. Seller’s acceptance of Orders, whether oral or written, and/or its delivery of Goods to Buyer is based on the express condition that Buyer agrees to all of these Terms and Conditions. QUOTATIONSWhere this Agreement is used by Seller to place a bid, Seller’s quotation is for prompt acceptance and Seller may change and/or withdraw without notice. Buyer’s prompt acceptance of the quotation is a material term of the bid and any subsequent agreement. In cases where freight allowance is included in the quotation, Buyer is liable for any rate increase and/or additional expense over the calculated allowance resulting from compliance with Buyer’s shipping instructions.

DELIVERY Delivery terms (stated in Incoterms® 2010) are as stated on each Order. All shipping dates are approximate and any time period indicated for a shipment will not begin until receipt at Seller’s plant of complete manufacturing, shipping and credit information. Tender of delivery is deemed to occur at the earliest of (A) acceptance of shipment by designated shipper, (B) allocation of Goods to Buyer at premises other than Seller’s, (C) delivery to Buyer’s representative or designee or (D) mailing of an invoice to Buyer. Title to Goods will pass to Buyer on tender of delivery, subject to Seller’s right of stoppage in transit and to any interest of Seller reserved to secure Buyer’s payment or performance, irrespective of any freight allowance or prepayment of freight. If Seller holds Goods per Buyer’s instructions or because Buyer has failed to supply shipping instructions or because Seller, in its sole discretion, determines that any part of Goods should be held for Buyer’s account, Seller may invoice for the Goods and Buyer agrees to make payment at the maturity of the invoice rendered. Goods invoiced and held at any location for whatever reason will be at Buyer’s risk and Seller may charge for (but is not obligated to carry) insurance, storage and other expenses incident to such delay at its prevailing rates. Partial deliveries will be accepted by Buyer and paid for at Agreement prices and terms. When Buyer has declared or manifested an intention not to accept delivery, no tender will be necessary, but Seller may, at its option, give written notice to Buyer that Seller is ready and willing to deliver and such notice will constitute a valid tender of delivery. Buyer must report any shortages in shipments within three (3) calendar days of receipt of the initial shipment. Buyer may not make any deduction from any payment due hereunder by reason of loss or damage to Goods in transit. On Buyer’s written request, Seller, in its sole discretion, may agree as a service to Buyer to process Buyer’s claim against the carrier for any loss or damage in transit, provided that Seller receives such claim within five (5) days of delivery of the Goods. All claims must be accompanied by a delivery receipt, signed by carrier’s agent at time of delivery, on which receipt the loss or damage has been noted, or such claims will be waived.

PRICES; PAYMENTPrices and payment terms are stated on Seller’s Order or invoice document. Seller may make partial shipments and payment for that portion will be due as provided on Seller’s Order or invoice document based on time of shipment. If, at any time or for any reason, Seller has cause to question Buyer’s ability to perform, Seller may demand such assurances of Buyer’s performance as Seller deems necessary in its discretion, including payment in advance for all shipments. In the event (A) Buyer fails within ten (10) calendar days of Seller’s demand to provide Seller with such assurance, or (B) Buyer is declared bankrupt or insolvent or any proceeding is brought against Buyer, voluntarily or involuntarily, under any bankruptcy or insolvency laws, or (C) Buyer fails to make payment for Goods when due, Seller may suspend its performance, cancel any Order then outstanding, receive reimbursement for its reasonable and proper cancellation charges and collect any sums due and owing, its reasonable cancellation charges and all damages resulting from Buyer’s default. Additionally, if Buyer fails to make payment for Goods when due, Buyer’s account will be deemed delinquent and Buyer will be liable to Seller for a service charge of eighteen percent (18%) per annum or the maximum allowed by law, whichever is greater, on any unpaid amount Buyer will be liable to Seller for all costs and expenses of collection, including court costs and reasonable attorneys’ fees. Seller’s prices do not include sales, use, excise or other similar taxes and Buyer agrees to pay the amount of any present or future such tax in addition to the price specified in each Order, unless Buyer, at the time of sale, provides Seller with all tax-exemption certificates required by taxing authorities.

CANCELLATION, CHANGES AND RETURNSIf Buyer properly requests a cancellation, change or return, Seller may, at its option: (A) charge Buyer for any costs Seller incurred prior to or as a result of such cancel-lation, change or return; (B) revise its prices and delivery dates to reflect such change; and/or (C) accept returned Goods for credit if, in Seller’s sole discretion, it finds such Goods to be standard stock and in good condition. The credit will be, in Seller’s sole discretion, either the invoice price less a percentage to be determined by Seller or the scrap value of the Goods, along with shipping and handling charges to be determined by Seller. All returned Goods must be securely packed by Buyer to ensure that returned material is not damaged during shipment.


80

FORCE MAJEURE; DEFERRED DELIVERYSeller will not be liable for any expense, loss or damage resulting from delay in delivery or prevention of performance caused by any event beyond Seller’s reasonable control (“Force Majeure”), including without limitation: fire; flood; storm; act of God; strike, labor dispute or labor shortage; lack of or inability to obtain materials, fuels, supplies or equipment; civil unrest or riot; accident; transportation delay or shortage; act or failure to act of Buyer or any government; or any other cause whatsoever, provided that such cause is beyond Seller’s reasonable control. Seller will have such additional time for performance as may be reasonably necessary under the circum-stances and may adjust the price to reflect increases occasioned by Force Majeure. Buyer’s acceptance of any Goods will constitute Buyer’s waiver of any claim for damages on account of any delay in delivery of such Goods. If delivery is delayed or interrupted by Force Majeure, Seller may store the Goods at Buyer’s expense and risk and charge Buyer a reasonable storage rate. If Seller is delayed because it is awaiting Buyer’s approval or acceptance of designs, drawings, prints or engineering or technical data, or is awaiting Buyer’s approval or acceptance of Goods, Seller will be entitled to an adjustment in price equal to any increase in Seller’s production costs and any other losses and expenses incurred by Seller attributable to such delays. If Buyer requests and Seller approves in writing a deferred delivery on any Order, Seller may charge Buyer for the completed portion of the Order and warehouse all completed Goods at Buyer’s expense and risk of loss. As to any uncompleted portion of the Order, Seller may, at its option, cancel said uncompleted portion in accordance with Section 5 above or revise its prices and delivery schedules on the portion not completed to reflect its increased costs and expenses attributable to the delay.

WARRANTY; PATENTS Seller warrants that Goods will be of the kind described in this Agreement and free from defects in material and workmanship under conditions of normal use. Seller reserves the right to make any modifications required by production conditions to information set forth in Seller’s catalogues and advertising literature. Seller will not be liable or responsible, however, for (A) any defects attributed to normal wear and tear, erosion or corrosion, improper storage, use or maintenance or use of Goods with in-compatible products, or (B) defects in any portion or part of Goods manufactured by others. If (B) above is applicable, Seller will, as an accommodation to Buyer, assign to Buyer any warranties given to it by any such other manufacturers; provided, however, that the foregoing will not extend Seller’s warranty to any accessory products unless otherwise agreed to in writing by Seller. All warranties are void if Goods are modified or used in conjunction with products or accessories not manufactured or approved by Seller or which are incompatible with Goods. Any claim by Buyer with reference to Goods for any cause will be deemed waived by Buyer unless submitted to Seller in writing within ten (10) calendar days from the date Buyer discovered, or should have discovered, any claimed breach. Buyer will give Seller an opportunity to investigate. If Buyer furnishes prompt notice to Seller of any defect and an opportunity to inspect the alleged defect as provided herein, Seller will, in its sole discretion, either: (i) repair the defective or non-conforming Goods; (ii) replace nonconforming Goods, or part thereof, which are sent to Seller by Buyer within sixty (60) calendar days after receipt of the Goods at Buyer’s plant or storage facilities; or (iii) if Seller is unable or chooses not to repair or replace, return the purchase price paid and cancel any obligation to pay unpaid portions of the purchase price of nonconforming Goods. In no event will any obligation to pay or refund exceed the purchase price actually paid. Repair and/or replacement as provided above will be shipped EXW (Ex-Works) Seller’s facility (per Incoterms® 2010) unless otherwise agreed in writing by Seller. Buyer will prepay all transportation charges for return of Goods or part thereof to Seller, unless otherwise agreed in writing by Seller. Seller will not be responsible for any labor, removal or in-stallation charges that may result from the above-described repair and/or replacement of any Goods. This warranty does not cover failure of any part or parts manufactured by others, failure of any part or parts from external forces, including without limitation corrosive soils, earthquake, installation, vandalism, vehicular or other impact, appli-cation of excessive torque to the operating mechanism, frost heave or other Force Majeure. Buyer’s exclusive remedy and Seller’s sole liability for any loss, damage, injury or expense of any kind arising from manufacture, delivery, sale, installation, use or shipment of Goods will be, at Seller’s option, the remedies described above, whether based on contract, warranty, tort or any other basis of recovery whatsoever. If any claim is made against Buyer based on a claim that any Goods constitute an infringement of any U.S. Letter Patent, Buyer will notify Seller immediately. Seller may, with Buyer’s assistance, if required, but at Seller’s expense, conduct settlement negotiations or defense of any litigation. If any Goods are held to infringe any U.S. Letter Patent, and their use is enjoined or, if as a result of a settlement, Seller deems their continued use unadvisable and provided that Buyer has given Seller the immediate notice required above and has used Goods only in accordance with the provisions of this Agreement and has not altered or changed them in any material way, Seller will, at its option and expense, procure for Buyer the right to continue using Goods, modify Goods so that they become non-infringing, replace Goods with non-infringing Goods of substantially equal quality or replace Goods and refund the purchase price, less reasonable depre-ciation. The above is intended as a complete allocation of risks between the parties, including without limitation liability for patent infringement. Buyer understands that it will not be able to recover consequential damages even though it may suffer such damages in substantial amounts. Because this Agreement and the price paid reflect such allocation, this limitation will not have failed of its essential purpose even if it operates to bar recovery for such consequential damages.

LIMITATION OF LIABILITYTHE WARRANTIES IN SECTION 7 ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED BY LAW OR STATUTE OR ARISING FROM TRADE USAGE OR COURSE OF DEALING. THERE IS NO IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT, WHETHER AS A RESULT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE) OR STRICT LIABILITY, WILL SELLER BE LIABLE FOR ANY PUNITIVE, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION LOSS OF PROFIT, LOSS OF USE OF GOODS OR OTHER PROPERTY OR EQUIPMENT, DAMAGE TO OTHER PROPERTY, COST OF CAPITAL, COST OF SUBSTITUTE GOODS, DOWNTIME OR CLAIMS OF BUYER’S CUSTOMERS FOR ANY OF THE AFORESAID DAMAGES. SELLER WILL NOT BE LIABLE AND BUYER AGREES TO INDEMNIFY SELLER FOR ALL PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LIABILITY RESULTING IN WHOLE OR IN PART FROM BUYER’S NEGLIGENCE. NO CLAIMS OF ANY NATURE, WHETHER BASED ON CONTRACT, TORT, STRICT LIABILITY OR OTHERWISE MAY BE BROUGHT AGAINST SELLER MORE THAN TWENTY-FOUR (24) MONTHS AFTER DELIVERY OF GOODS TO BUYER. In any contract by Buyer for resale of Goods, Buyer will effectively disclaim, as against Seller, any implied warranty of merchantability and all liability for property damage or personal injury resulting from handling, possession or use of Goods, and will exclude, as against Seller, any liability for special or consequential damages.

TERMS AND CONDITIONS


81

CONTROLLING LAW; CONSENT TO VENUE; DISPUTE RESOLUTION This Agreement and all rights and obligations hereunder will be governed by, and construed in accordance with, the laws of the State of Alabama, without regard to its conflicts of laws provisions. The United Nations Convention on Contracts for the International Sale of Goods will not apply to this Agreement. All disputes, claims or controversies (individually or collectively, a “Dispute”) between Seller and Buyer arising out of or relating to this Agreement, including without limitation Disputes based on or arising from an alleged tort, will be resolved by binding arbitration in accordance with Title 9 of the U.S. Code and the Commercial Arbitration Rules of the American Arbitration Association (“AAA”). Disputes will be arbitrated in Birmingham, Alabama, U.S.A. Defenses based on statutes of limitation and similar doctrines will be applicable in any such proceeding, and commencement of an arbitration proceeding under this Agreement will be deemed commencement of an action for such purposes. The parties will select arbitrators in accordance with the Commercial Arbitration Rules of the AAA. The AAA will designate a panel of ten (10) potential arbitrators knowledgeable in the subject matter of the Dispute. Seller and Buyer will each designate, within thirty (30) calendar days of receipt of the list of potential arbitrators, one of the potential arbitrators to serve, and the two arbitrators so designated will select a third arbitrator from the eight remaining candidates. No Dispute will be arbitrated as a class action, representative or general public action, collective action, private attorney-general action, or otherwise be joined with claims of any other person (“Collective Proceedings”). Accordingly, AAA’s Supplementary Rules for Class Arbitrations will not be applicable. If this limitation on Collective Proceedings is held by a court of competent jurisdic-tion to be unenforceable or interpreted to not prevent a Collective Proceeding, then such action will proceed in a court of law as provided below and not arbitration. If any arbitrator renders a decision regarding the question of arbitrability of the above limitation or orders any form of Collective Proceeding, then the arbitrator has exceeded its powers under the Federal Arbitration Act. Notwithstanding the foregoing, Seller reserves the right to resolve or bring any Dispute in a court of competent jurisdiction in the state or federal courts of Alabama and the parties irrevocably agree that, except when the Dispute is arbitrated, the exclusive venue for all Disputes between the parties will be the state and federal courts of Alabama, to which jurisdiction each party hereby irrevocably submits. Each party waives any objection or defense that it is not personally subject to jurisdiction of the state and federal courts of Alabama; that venue of the action is improper; and that the action, suit or proceeding is brought in an inconvenient forum. In addition to any other mode of service of process authorized by law, each party consents to service of process by registered or certified mail.

COMPLIANCE WITH LAWS Each party represents and warrants, in connection with transactions contemplated by this Agreement, and any other agreement contemplated by or entered into pursuant to this Agreement, that it will comply with all applicable federal, state and local laws, codes, regulations, orders and ordinances, including without limitation: (A) all applicable laws and regulations regarding export controls, economic sanctions, trade embargoes and anti-boycott restrictions, and all applicable anti-corruption laws, including but not limited to the U.S. Foreign Corrupt Practices Act (as amended) and the United Kingdom Bribery Act (collectively, “Applicable International Trade and Anti-Corruption Laws”); and (B) all applicable equal opportunity requirements including those set forth in U.S. Executive Order 11246, the U.S. Rehabilitation Act of 1973, as amended, and the U.S. Vietnam Era Veterans Readjustment Assistance Act of 1974, as amended, and regulations promulgated thereunder, and laws prohibiting discrimination against any person because of veteran status, disability, race, creed, color, national origin, religion, age or sex in any term or condition of employment, all of which are incorporated by reference into this Agreement; and (C) all applicable laws and regulations addressing human trafficking and slavery. Each party acknowledges and confirms that it and its officers, directors, employees, agents, contractors, designees and/or any other party acting on its behalf (collectively “Related Parties”) are familiar with the provisions of Applicable International Trade and Anti-Corruption Laws. Each party agrees to indemnify, defend and hold harmless the other party and its employees from and against any and all claims, demands, costs, penalties and fines arising in connection with any alleged breach by the indemnifying party or any of its Related Parties of this Section. Seller may terminate this Agreement in its entirety, without liability to Buyer, if Seller believes in good faith that Buyer or any of its Related Parties has violated or intends to violate this Section.

MISCELLANEOUSA. No waiver of any provision, right or remedy contained in this Agreement, including the terms of this Section 11(A), is binding on or effective against a party unless expressly stated in writing and signed by such party’s authorized representative. Each party expressly agrees that no right or remedy provided for in this Agreement can be waived through course of dealing, course of performance or trade usage and that reliance on any waiver without the other party’s written consent is unreasonable. Waiver by a party of any breach will be limited to the specific breach so waived and will not be construed as a waiver of any subsequent breach. A party’s approval or consent to any action proposed by the other will not be considered an agreement to the propriety, fitness or usefulness of the proposed action, and will not affect the proposing party’s obligation to strictly comply with this Agreement and all related Orders.

B. Buyer may not assign this Agreement or any rights or obligations hereunder without Seller’s prior written consent. Any attempted assignment in violation of this Section is void; however, this Agreement and the Terms and Conditions contained herein are enforceable against Buyer’s successors and permitted assigns.

C. Seller’s remedies in this Agreement are cumulative and in addition to any other remedies available to Seller, whether at law, equity or otherwise.

D. If any provision or part of a provision contained in this Agreement is held by a court of competent jurisdiction to be contrary to law or public policy, the remaining provisions of the Agreement will remain in full force and effect.

E. No provision of this Agreement may be construed against either party as the drafting party.


82 CANAL GATE INSTALLATION INSTRUCTIONS

The following instructions are provided to guide the user in proper installation techniques and procedures for Waterman equipment. If proper care and accuracy are exercised in the field when installing our gates, they will operate as designed at maximum efficiency.

PROCEDURE FOR WALL MOUNTING OF “FLATBACK” STYLE GATESNote: use anchoring system with bolts set in two-part epoxy. Use of L-shaped anchor bolts embedded in concrete typically not required. Each bolt will have two nuts, one for behind the gate frame, and one to secure frame to anchor bolt.

1. Use the gate as a template, or make a template from the gate bolt pattern and mark the hole locations on the mounting wall 2. Prepare/drill anchor holes per two-part epoxy manufacturer instructions3. Install two-part epoxy4. Install anchor studs, take care that all anchor bolts are in proper position. Do not attempt to install gate onto bolts that are not properly set.5. Install back nut and washer6. Install gate7. Install front washer and nut8. Using double nuts, plumb the gate frame9. Once plumb and nuts are tightened, check seals using feeler gauge. After gate is seated properly and plumb, grout the gap between the frame ring and the concrete headwall with a non-shrink material. Fill all voids.

Notes: do not force gate onto mis-aligned bolts. Tighten bolts uniformly to avoid warpage of gate.For more information on creating a template and the double nut method, visit our website to view videos of the step by step process at http://watermanusa.com/resources/instructional-videos/

INSTALLATION OF “SPIGOT-BACK” STYLE GATE (USED WHEN GATE IS TO BE CONNECTED TO CORRUGATED METAL PIPE OR OTHER SIMILAR CORRUGATED PIPING SYSTEM)1. Fit spigot found on the back of the gate frame over the end of the pipe, taking care to assure the gate is perpendicular to pipe.2. Using the pre-drilled holes on the gate spigot as a guide, drill matching holes in the wall of the pipe, using 7/16" drill bit.3. Fasten gate to pipe by bolting from the inside out4. Add mastic caulking for sealant between frame and pipe5. Brace the inside of pipe and gate as necessary. (deflection or distortion of the attached pipe section may cause warpage of gate seat and potential for leakage)6. Place coupled gate and pipe in form or ditch and backfill or pour as required, making sure that gate frame is vertical in two planes7. Remove bracing and clean gate seats and operating joints. Check to see that seats make proper contact around full periphery of gate (use .004' feeler gauge)

INSTALLING GATE ON CONCRETE PIPE USING TAPERED SETTING COLLARThe light gauge galvanized taper setting collar is used as a “form” for placing grout and as a temporary means of locating a gate in the end of concrete pipe. This setting collar is not designed to be a permanent item, but only an aid to installation. Anchor bolts may be needed on upper structural frame members and may be cast in place at time of pour, or expansion anchors may be used.

1. Place gate on pipe or opening inserting the taper collar until a snug fit is obtained or gate is stopped by structure or pipe

2. Align gate in a vertical and horizontal plane and place grout around the gate, making a heavy band sealing and attaching the cast iron frame ring to the pipe. Grout is normally lapped over the frame flange and smoothed in lace with laying mitts or gloves

NOTE: If desired, anchor bolts or reinforcing rod can be attached in the anchor bolt holes and placed in the grout band for added strength.

3. After band has dried, check for cracks and repair as needed. Open gate and pack grout in void between collar and pipe

4. Check gate for grout on seats or in slide grooves and clean as required


83H-30 LINE GATE INSTALLATION INSTRUCTIONS

INSTALLATION OF WATERMAN H-30 LINE GATES ON HDPE PIPE

1. Adapter can go inside or outside of pipe, depending on customer preference. Please specify “inside” or “outside” when ordering and provide appropriate measurements to Waterman.

2. Add caulking for sealant

3. Drill holes through adapter and pipe

4. Bolt down from the outside in, or the inside out

ATTACHING WATERMAN H-30 LINE GATES TO CONCRETE PIPE

1. Apply grout on the inside diameter of the hub end of the gate or valve

2. Pipe slides on the inside of the hub

3. Use grout for seal between the hub and the pipe

4. Support valve until grout has set up

ATTACHING WATERMAN H-30 LINE GATES (TYPE 4) TO LOW HEAD PVC PIPE

1. Pipe goes over the valve spigot

2. Use two-part epoxy for connection

3. Use band clamp to secure

ATTACHING WATERMAN H-30 LINE GATES WITH PIP OUTLETS FOR 80# PIP PVC

1. Pipe goes on the inside of Waterman valve

2. Use PVC primer and solvent cement for bonding the valve to the PVC pipe

3. Use band clamp to secure

ATTACHING WATERMAN H-30 LINE GATES WITH FLANGE X FLANGE CONNECTIONS

1. Waterman uses 125# ANSI flange for pipe connections and Waterman standard drilling for wall mounting

2. For pipe flange mounting: follow normal pipe flange procedure

3. For wall mounting: refer to instructions for flatback/wall mounting


84

Waterman Valve LLC - Engineered Water Control Products Since 191225500 Road 204 Exeter, California 93221 USA Tel: 1-(559) 562-4000 Fax: 1-(559) 562-2277 www.WatermanUSA.comNationwide Order Desk: (800) 331-0808

GET TO KNOW WATERMANWaterman is a leading supplier of water control products to the water treatment, rural waterdistribution, industrial processing and agricultural industries based in Exeter, California.

The company was founded by W.A. Waterman in 1912 as a fabricator of metal components for the growing California Central Valley agricultural markets. Waterman’s purchase of the Red Top line in the early 1930’s gave the company a leading position in both agricultural water distribution and on-farm water management products.

Herrick Waterman became company President in 1953, and rapidly expanded the company into production of large and complex sluice gates, slide gates and radial gates for water projects throughout the Western States. A new plant was opened in 1963 to support the growth which led to projects worldwide. The company remains one of North America’s leading suppliers of gates for municipal water treatment and rural water distribution systems.

In 2018, Waterman was acquired by McWane, Inc. McWane, Inc. is a family-owned business based in Birmingham, Alabama, with companies across the United States and the world. At the McWane Family of Companies, we cast ductile iron products–including pipe, valves, hydrants, fittings, and plumbing products–manufacture fire extinguishers, fire suppression systems, steel pressure vessels, build network switches and monitoring equipment. We are the leader in delivering clean, safe drinking water around the world while focusing on the safe, environmentally-friendly manufacturing of our products. The company employs more than 6,000 team members and has a longstanding commitment of support to the communities where we live and work.

LIT-AG-201 Rev. 1/2019

Waterman Valve LLC - AGRICULTURAL WATER CONTROL ......39 AC-31 Aluminum Canal Gates 40 74P-30...

Documents

Transcript of Waterman Valve LLC - AGRICULTURAL WATER CONTROL ......39 AC-31 Aluminum Canal Gates 40 74P-30...