Volume 20 No. 7 APRIL 2012

CCompostingg Equipmentt -- Turners,, Screens,, Grinders,, ChippersWWaste not want not:aste not want not: FrFrom seom sewawaggeeto sustainabto sustainable compostle compost

Compostingg Equipmentt -- Turners,, Screens,, Grinders,, Chippers

Ap

ril 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

2

Pag

e 3• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Ap

ril 2012

My Landfill Costs arekilling my C&D Opera-tion! What can I do?

The answer: STOP GO-

ING THERE!

Obviously if you couldavoid it, you certainlywould be. But since you

are not, let’s take a lookat what you are sending.

First of all most of theC&D systems being soldtoday are of the same de-

sign, whether small,medium or large. Not al-ways, but most of thetime they are. So, if youplan to recycle ratherthan take material to thelandfill, there are thingsyou can do to prepare.

For example, FIGUREOUT YOUR MARKETS…before you design yoursystems.

• If you are using a floattank to remove the heav-ies and you are sendingyour wood and plastic forfuel and the material can-not be above 15 percentmoisture... Why do youhave a float tank?

• If you are pulling thesmall lightweight prod-uct off of your sort linewith air and puttingback into you stream lat-er, why are you pullingthem in the first place?

• If your high speedgrinder at the end ofyour system is costingyou too much mainte-nance time and money,why do you have it?

To start with:• The number one rule

is to keep your materialsdry. Rain on your mate-rial will cost you thou-sands at the landfill.They have cheap fabricbuildings these days,that will pay for them-selves with the greaterproduction and reducedmaintenance time in ad-dition to reducing land-fill fees for the extra

weight that water adds.• You need to be

pulling every single pieceof metal, hard plastic,rock and dirt, shingle,cardboard, drywall.Every piece.

• If you are able to pileyour residue, then oper-ate a second shift to re-run your residue fromthe first shift and seewhat you are missing.Dirt stuck to plastic fallsoff, steel that was buriednow gets pulled, allkinds of things happenand rerunning may saveyou big dollars later.

• Shredding theresidue to reduce thevolume of outboundloads will help too.

• Determine wheremost of your residue iscoming from. Is it onetype? One customer? Ad-just you price structureaccordingly.

• If you purchase ashredder and screener,that will help.

If you have nowhere togo but the landfill, youmust figure out addition-al markets for theresidue. Most of theresidues include mat-tresses, carpet, lightplastics and miscella-neous junk. Find themarket for all this mate-rial and you will reduceyour costs.

• Mattresses are easilyshredded with a lowspeed shredder and youcan recover a substantialamount of steel. The fluffcan be sent for fuel.

• Shingles make up alot of landfill weight andhave become a problemwith disposal lately be-cause of less paving go-ing on. If you can pilethem for a while, youcan shred and screenthem and use those in-ternally making roadsand parking lots on yourown properties.

• Drywall shreddedand screened is easy toget rid of to a whole lot offarmers.

• One of the best waysto dispose of residue is toshred it for fuel to ship itto some sort of CofiredPlant. Even if the plant isnot logistically worth theamount saved, use a webservice for transporta-tion options. Many oper-ations use a backhaulfrom another Carrier totransport their product.The key is to reduce yourcost, not necessarily

turn a profit. Zero isgood here.

• Carpeting often is dif-ficult to recycle, but insome parts of the coun-try, it is easier than inothers. Get together withother C&D operatorsaround the country andfind out what they are do-ing with carpet and othermaterials. Get their con-tacts and share ideas.

Adding more equip-ment like a shredder andscreener does not comecheap. But the multipleoperations they becomeinvolved with turn youfrom a mediocre recy-cling operation into aproductive, producer ofrecycled materials. Fromthe front end reducingmattresses and bulkywaste and recovering thesteel, to the back endshredding shingles,wood and residue, ashredder pays for itselfmultiple times over.

A screen will assist youin more applications.Whether it’s screeningground shingles or dry-wall at 3/8-inches, dirtat - inch or concrete at2-inches, you will beable to market severalmaterials that you aren’tcurrently, with the smallinvestment in a versatileaddition.

Join the GrinderGuyand other industry pro-fessionals at the C&DWorld Conference inNashville, TN March 25-27. For more informationcall 608-538-3552 or goto www.cdrecycling.org.

PROFITABILITY FOL-LOW-UP

Following up on our2011 year end profitincreasing ideas, youcan find that articlehere- www.askthe-grinderguy.com :

• Repair and Mainte-nance — All repairsshould be completed,spare parts in stock;

• Equipment Utiliza-tion — Rentals should beordered;

• Products — Produc-tion should be inventory-ing volumes; and

• Advertising — Ads,Spots, should be running

Also, for more helpfultips, advice and equip-ment, visit www.askthe-grinderguy.com. Need usto visit your operation?Have a question?

Drop us a line. DaveWhitelaw, grinderguy@askthegrinderguy.com.

Hey Grinder Guy

Ap

ril 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

4

Waste Handling Equipment News EastIssn. 1085-7621

Waste Handling Equipment News is published monthly byLee Publications

P.O. Box 121, 6113 State Highway 5, Palatine Bridge, NY 13428Standard Class Postage Paid at Palatine Bridge, NY 13428

POSTMASTER: Send address changes to: Lee Publications, P.O. Box 121, Palatine Bridge, NY 13428Publisher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frederick W. LeeVice President, Production . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mark LeeVice President & General Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bruce ButtonEditor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jon M. CaseyEditorial Assistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kathleen LeeComptroller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Robert MoyerProduction Coordinator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jessica MackayPage Composition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Michelle GresslerShop Foreman . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Harry DelongSubscriptions/Circulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 888-596-5329Classified Ad Manager - Peggy Patrei . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0111

MAIN OFFICE: Palatine Bridge, NY 13428 518-673-3237 - FAX: 518-673-2381Wendell Jennings (Sales Manager) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0114Lyndsay Bock (National) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0115Terry Clary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0161Mark Fowler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0116Jan Andrews . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0110REGIONAL SALES OFFICESKegley Baumgardner (Western VA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 540-255-9112Scott Duffy (NH, VT, ME) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 802-484-7240Ian Hitchener (Baltimore, Delmarva Peninsula, Southern New England) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-210-2066

Wanda Luck (Carolinas). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336-416-6198Mark Sheldon (OH, PA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 814-587-2519Tina Krieger (National). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0108

NATIONAL TRADE SHOW SALES Ken Maring,Trade Show Manager . . . . . . . . . . . . . . . . . . . . . . 888-355-5080 or 518-673-0103

Waste Handling Equipment News will not knowingly accept or publish advertising which isfraudulent or misleading in nature.The publisher reserves the sole right to edit, revise or rejectany and all advertising - with or without cause being assigned - which, in his judgment, is un-wholesome or contrary to the interest of this publication. Waste Handling Equipment Newsassumes no financial responsibility for typographical errors in advertisements; but, if at fault,will reprint that portion of the ad in which the error appears. Publisher accepts no financialresponsibility for ads which do not appear due to any circumstance.

May. . ADVERTISING DEADLINE: April 6Screening Equipment / Crushing EquipmentShow: Waste Expo, May 1-3, Las Vegas, NV

June. . ADVERTISING DEADLINE: May 4Wood Waste Recycling-Grinding, Screening, Coloring, BiomassEnergy

July... ADVERTISING DEADLINE: June 1Scrap Processing Equipment / Balers, Shears, Shredders, Magnets

August. . ADVERTISING DEADLINE: July 6C&D Recycling - Attachments, Picking Stations, Screens

September. . ADVERTISING DEADLINE: August 3Crushing / Grinding / Screening / Shredding

October. . ADVERTISING DEADLINE: September 7Asphalt & Concrete Recycling - Shingle Grinders, Crushers,ScreensPre-Show: TCIA

ADVERTISE!TABLE OF CONTENTS

The Editorial Deadline precedes the Ad Deadlineby two days. Waste Handling Equipment News read-

ers include owners, operators, and purchasing agents

involved in construction demolition, asphalt/concrete

recycling, wood waste recycling and composting. Our

editorial emphasizes new equipment, site stories,

association updates, legislation and industry news.

If you have news to contribute, contact:

Jon M. Casey, EditorWaste Handling Equipment News6113 State Highway 5

Palatine Bridge, New York 13428

Tel: 717-258-6775

Fax: 518-673-2699 E-Mail: jcasey@leepub.com

Cover photo: Matt Atkinson, compost facility supervisor for BellCounty WCID No. 1, is proud to be a part of an enterprise thatserves his community in this way.

Ask the Grinder Guy . . . . . . . . . . . . . . . . . . . . . . . 3

Leonardi introduces new M1 Blueshark cuttingsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Legacy the first to offer tension fabric buildingswith rigid frame, structural steel . . . . . . . . . . . . 12

Waste not want not: From sewage to sustainablecompost. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15by Dawn Buzynski, Two Rivers Marketing

CalCrush has the relliability they need with IROCKscreen plants . . . . . . . . . . . . . . . . . . . . . . . . . 22-23

by Gwen Pernie

“Maximum” safety and comfort with SENNEBO-GEN Maxcab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

U.S. Composting Council’s 20th AnnualConference and Trade Show. . . . . . . . . . . . . . . . 28

Grinding & Drilling Equipment, Inc. joins Morbarknetwork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Classifieds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Pag

e 5• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Ap

ril 2012

KEWANEE, IL — The new BC472RBrefuse compactor from BOMAG offersthe performance and durability of thecompany’s larger machines, but in amore compact package. Ideal for small-er landfills, the 52,900-pound com-pactor offers a sealed frame design,outstanding operator comfort, easymaintenance access and superior com-paction capabilities.

Featuring BOMAG’s exclusivePAKALL wheel design, the BC472RButilizes polygonal compaction rings.The front wheel contains 50 teeth, andthe rear wheel has 40. The machineeliminates air voids by shredding andcrushing waste, allowing landfill oper-ators to achieve greater density, pre-serve valuable airspace and extend thelifespan of their landfills.

The BC472RB comes with a hydro-static drive system for superior controland traction. Powered by a 255 hpDeutz water cooled diesel engine, the

hydrostatic drive efficiently transferspower and torque to the wheels, pro-viding high pushing power while con-suming low amounts of fuel.

Like the larger compactors in theBOMAG line, the BC472RB features asealed frame and hubs, which protectmajor drive components and preventdebris from entering the engine com-partment. The compactor has 23.6-inches of ground clearance and an ar-ticulating/oscillating center joint,helping to maintain greater wheelcontact, control and maneuverability.Adjustable scraper bars and wire cut-ters keep the wheels free of debris tomaintain traction and allow maxi-mum tooth penetration.

In addition to offering superior com-paction to extend landfill lifespan, theBC472RB also reduces maintenancecosts and labor. A central lubricationsystem automatically greases all majorjoints, eliminating the need for regular

manual greasing. The vertically open-ing hood and lower access door providecomplete access to all engine mainte-nance points.

Operator comfort and ergonomicsare also enhanced with the BC472RB.Joystick controls allow the operator todrive the machine from a natural posi-tion, thereby reducing fatigue, and cabnoise is minimized for a quiet operat-

ing environment.Other standard equipment includes

a sound-suppression cab with heatingand air conditioning, vibration isola-tion and AM/FM CD radio, front andrear working lights, comfort seat,windscreen wipers and washers, back-up alarm, warning horn, seat belts

Loader Rakes Grapple Buckets

Car Body Forks Grapples

Thumbs & Rakes Skid Steer w/ replaceable teeth

North American Attachments

800-380-8808www.excavator-attachments.com

COMPANY WRENCH

4805 ScoobyLane Carroll, OH 43112 (P) 740-654-5304

Toll Free 866-262-4181

Cleveland, OH Branch

525 Golden Oak Pkwy Oakwood Village, OH 44146

(P) 440-439-4567

Piketon, OH Branch

3668 US Route 23 South Piketon, OH 45661 (P) 740-289-3294

Washington, PA Branch

400 West Beau StWashington, PA 15301

(P) 724-222-2447

Indianapolis, IN Branch

7019 Brookville RdIndianapolis, IN 46239

(P) 317-375-7790

Cookeville,TN Branch

1220 Southside DrCookeville, TN 38506

(P) 931-526-6222

Rineyville, KY Branch

6300 Rineyville RdRineyville, KY 40162

(P) 270-360-1010

Aiken, SC Branch

1252 Old Kimbill TrailAiken, SC 29805(P) 803-642-0060

Jacksonville, FL Branch

4710 Dignan StreetJacksonville, FL 32254

(P) 904-268-6554

Plant City, FL Branch

2812 Airport RdPlant City, FL 33563

(P) 813-754-5800

Pasco, WA Branch

2300 N Commercial AvePasco, WA 99301(P) 509-728-6614

NJ Branch

(P) 740-422-6045(P) 609-313-0720

MIDLANTIC MACHINERY2240 Bethlehem PikeHatfield, PA 19440

215-822-0145

Fax 215-822-7971

6375 Allentown Blvd.Harrisburg, PA 17112

717-652-3190

Fax 717-652-6405

1261 Highway 315Wilkes-Barre, PA 18702

570-824-9891

Fax 570-824-0268

1400 Joh AvenueBaltimore, MD 21227

410-247-2100

Fax 410-536-57122

BOMAG introduces the BC472RB refuse compactor for smalllandfill operations

The BC472RB comes with a hydrostatic drive system for superior control and traction.

BOMAG 6

Ap

ril 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

6

RALEIGH, NC —McGill EnvironmentalSystems, a North Caroli-na based organics recy-cling company, has beennamed the 2011 Com-poster of the Year by theU.S. Composting Coun-cil, the national trade as-sociation for compostmanufacturers. Theaward was presented ata luncheon during theUSCC’s annual confer-ence in Austin, Texas onJan. 19.

The Composter of theYear award honors thebest U.S. commercialscale composting compa-ny. McGill is the firstCarolinas company to re-ceive the award and wasselected for its 20 yearsof achievements in com-post production, market-ing and education.

“Being named com-poster of the year is atremendous honor,” saysNoel Lyons, McGill presi-dent. “It serves as ac-knowledgement by ourpeers that McGill hasmade a real and lastingcontribution to the promo-tion of composting as anindustry across the U.S.”

McGill has regional op-erations centers nearRaleigh, NC, Wilmington,NC.and Waverly, VA, aswell as three facilities inIreland, and employsnearly 100 people.

Founded in easternNorth Carolina in 1991 by

Jim McGill and NoelLyons, McGill specializesin composting biodegrad-able materials from in-dustrial, municipal andagri-business sources.The company recyclesabout 400,000 tons ofwaste materials annually

to manufacture 370,000cubic yards of compostproducts for professionallandscaping, sports turf,erosion control and agri-cultural markets. In addi-tion to compost manufac-turing and compost sales,McGill also offers mobile

dewatering and trans-portation, as well as de-sign build operate servicesand technology licensingfor customer owned facili-ties. Visit www.mcgillcom-post.com for additional in-formation.

and a master battery dis-connect switch. Optionalequipment includes ahydraulic oil tempera-ture gauge, deceleratorpedal, cab protectiongrids, service platforms,a rotary beacon, specialpaint, charcoal cab fil-tration and an 11.8-footrefuse blade.

For more informationon the BC472RB refusecompactor or the com-plete BOMAG productline, including light com-paction equipment, sin-gle drum vibratoryrollers, tandem drum vi-bratory rollers, steelwheel rollers, pneumatictired rollers,recyclers/stabilizers, re-fuse compactors andmilling machines, contactBOMAG Americas, Inc.,2000 Kentville Rd., Kewa-nee, IL 61443. Call 309-853-3571, toll free 800-782-6624, fax 309-852-0350, e-mail info.bo-mag@bomag.com or visitthe BOMAG website atwww.gobomag.com/re-fuse-compactors.

BOMAG from 5

North Carolina company named top composter in U.S.

Pag

e 7• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Ap

ril 2012

CANTON, SD — Markyour calendars. TerexRoadbuilding an-nounces two springpaving service schooldates for Terex® Bid-Well automatic rollerpavers and work-bridges. The two daytraining sessions arescheduled for Thursday,April 26 and Friday,April 27, and Wednes-day, May 2 and Thurs-day, May 3. The classeswill be held in SiouxFalls and Canton, SD.

Created specifically forpaver owners, operators,service technicians andinspectors, the serviceschool strikes the rightbalance between class-room instruction andhands-on field demon-strations. The classes of-fer in-depth discussionfor paver and workbridgesetup, operation andservice, and are taughtby seasoned service andfield instructors.

“Students will learnhow to spec and set upour pavers for some of

the most complex pavingapplications, and wecover what options areavailable to improvepaving efficiency,” saysDean Johnson, servicemanager for Terex Bid-Well. “We also discussthe symptoms of ma-chine aging, what to lookfor and how to diagnoseand correct issues.”

The first day featuresin-class discussion andinstruction at the BestWestern Ramkota Hoteland Conference Centerin Sioux Falls, SD. Theseries of lectures in-clude: bridge, airport,highway and slopepaving techniques; ma-chine setup; texture andcuring; controller adjust-ment and troubleshoot-ing; skewed deck paving;screed rail and chair set-up and thin bondedoverlays. “We have de-signed the classes forcontractor interactionwith instructors andeach other,” says AronSweeney, service schoolcoordinator.

Day two includes ashuttle to Canton forhands-on paving demon-strations with Terex Bid-Well pavers, where stu-dents put their class-room training into prac-tice. Instructors showthe students properpaver setup and opera-tion for standard as wellas skewed pours. The fi-nal highlight of the dayis a guided tour of thenew 80,000-square-footTerex Bid-Well office andmanufacturing facility.

For class registrationor for more details, visitwww.bid-well.com. Reg-istration deadline is oneweek prior to the ses-sion date. There is nolimit to the number ofattendees a companycan send, but classroomsize is capped at 50.

Tuition for the two dayclass is $200 and in-cludes meals and trans-portation to and from theairport, hotel and TerexBid-Well facility. Sessionattendees receive dis-counted hotel room rates

at the Best WesternRamkota in Sioux Falls.Room reservations canbe made either online atwww.siouxfalls.ramko-ta.com or by calling 605-336-0650.

Prospective studentscan also call AronSweeney at 800-843-0824or e-mail him at (aron.sweeney@terex.com) forfurther information.

Terex Corporation is a

diversified global manu-facturer of a broad rangeof equipment that is fo-cused on delivering reli-able, customer drivensolutions for many appli-cations, including theconstruction, infrastruc-ture, quarrying, mining,shipping, transportation,refining, energy, utilityand manufacturing in-dustries. Terex reports

in five business seg-ments: Aerial Work Plat-forms; Construction;Cranes; Material Han-dling, Port Solutions andMaterials Processing.Terex offers financialproducts and services toassist in the acquisitionof equipment throughTerex Financial Services.More information can befound at www.terex.com.

Leonardi is your fullline tree care productprovider. Whether youneed the highest qualityperformance product, ora cost effective solution,we have the product,knowledge and experi-ence to make you suc-

cessful. Our patent pend-ing M1 Cutting System™brings the most advancedtechnology to stumpgrinding by integratingchip control, improvedvisibility and simplifica-tion to one tooth into asingle cutting system.

Now Leonardi has tak-en the M1 Cutting Sys-tems family to the nextgeneration with the addi-tion of the new M1 Blue-shark™ for small tomedium HP machines.Now there’s an M1 for al-most every grinder;

change all teeth in min-utes, and with fastercutting and clean upthey continue to saveyou time and money!

From our Tomahawk™teeth which boast thefastest cutting speed onthe market to our Tuff

Teeth™, Levco and 1/2-inch teeth, we have atooth for you. See them

on the web www.leonarditreecare.com orcall 800-537-2552.

Tools for the Trade by

www.MoleyMagneticsInc.com 716-434-4023 or cell 716-417-2591

Orange PeelGrapples

with or without electromagnets

Powerful Mobile Hydraulic ShearsWith or without rotation from 1 to 10 ton size

BEST

SCRAP SHEAR!

Rotating Pulverizer5 sizes available, reversed

cylinder to protect rod,cutting blade, Oversized

rotation motor

Fixed Pulverizer4 sizes available, reversed

cylinder to protect rod, easychange teeth, cutting blade

24v DC BatteryOperated Magnet

Inexpensive, easyinstallation and low

maintenance

Dates set for Terex Bid-Well spring paving service schools

The classes offer in-depth discussion for paver and workbridge setup, operation andservice, and are taught by seasoned service and field instructors.

Leonardi introduces new M1 Blueshark cutting system

Leonardi has taken the M1 Cutting Systems family tothe next generation with the addition of the new M1Blueshark for small to medium HP machines.

Ap

ril 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

8

Pag

e 9• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Ap

ril 2012

New remote operatedCreep Drive allows op-erators to control theStone Slinger and ma-neuver the truck from

outside the cab.MISSISSAUGA, ON —

W.K. Dahms Mfg. Ltd.has successfullylaunched a new genera-tion of remote controls forStone Slinger truck con-veyors that can dramati-cally reduce the time tounload and place aggre-gate loads with precision.

The new StoneSlinger™ Creep Drivesystem provides opera-tors with a remote con-trol feature that not onlycontrols the speed anddirection of the conveyor,but allows the operatorto remotely maneuverthe truck itself aroundthe jobsite. The operatornow has a single set ofcontrols to run the con-veyor and reposition thetruck for ideal placementof the material, withoutreturning to the truck.The truck and the StoneSlinger become a fullyintegrated material deliv-ery system.

Scott Nelson, managerof W.K. Dahms, reportsthat the first of the newStone Slingers equippedwith Creep Drive was de-livered at the end of Au-gust to John Da Silva ofRock Concrete FormingLtd. in Mississauga, On-tario. After putting theStone Slinger through itspaces for a full season,Da Silva says, “If I wasbuying another truck, Iwouldn’t get anythingelse — no question!”

According to Da Silva,his investment in theCreep Drive feature haspaid off well. “On a typi-cal weeping tile job, thedriver has to go back andforth to move the truckfour or five times. And,each time, when you getinto the truck, you haveto turn the PTO off, drivethe truck, put the airbrakes on again andrestart the PTO. It’s thetime saving that paysyou back.”

The right place to beBy using the remote

control to move the truck,the operator remains out-side the cab to keep thematerial flowing until theload is completely deliv-ered. Da Silva says that

getting out of the truck isthe right place for opera-tors to be. “You get outhere and you can seeeverything. We are alwaysworking in very tightspaces. You can watch thewheels and the groundmore closely than if you’resteering from the cab. You

won’t ever put the truckinto a pothole or a ditch,so you never have to waitfor another truck to comeand pull you out!”

The Stone SlingerCreep Drive adds a com-plete hydrostatic drivesystem to the standardpowertrain of the truck.

A hydraulic driven gear-box is inserted into thedriveline. A CAN Buspanel controls all hy-draulic and operatingfunctions and communi-cates with the remote,which the operator car-ries in a sling.

Jobsite safety

designed in Nelson explains that

safety was a key factor inDahms’ design of thesystem. “The maximumspeed the truck canachieve under hydraulicpower is 2.5 km/h — a

New Stone Slinger keeps operators out of thetruck and on the job!

Slinger 11

Ap

ril 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

10

Pag

e 11• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Ap

ril 2012

comfortable walkingspeed. The control cir-cuitry receives constantfeedback on the actualwheel speed from thetruck. If the truck’s onan incline, the hy-draulics will brake itsspeed automatically.Several fail safes arebuilt in as well. If thewheel speed exceeds 4km/h, the CAN Bus willshut down and stop thetruck completely.”

Lower costs, betterresults

Da Silva finds that theCreep Drive leads to betterjob quality, too, with lesswasted material. Opera-tors naturally tend to avoidextra walks back to thetruck if they possibly can.By making it easy to movethe truck into the best lo-cation, Creep Drive helpsoperators to distribute thematerial more preciselyand consistently with no

extra time or inconven-ience. For a contractor likeDa Silva, that translatesinto lower costs forcleanup and for material.

W.K. Dahms Mfg. Ltd.has been manufacturingthe Stone Slinger truckconveyor system formore than 30 years andcontinues to set thestandard for efficient de-livery and placement ofaggregate materials. Theoriginal Stone Slinger

concept was an innova-tion of W. Keith Dahms,who first fitted a truckbody with an outboardrear conveyor to replacethe traditional labouri-ous and costly wheelbarrow method of dis-tributing material onconstruction sites. StoneSlinger today representsa diverse family of sys-tems for precise, labourfree placement of graveland stone, sand, soil and

mulch materials.For further informa-

tion on Stone Slingertruck conveyor systems,contact Scott Nelson,manager, W.K. DahmsMfg. Ltd., P.O. Box 520,3074 Sawmill Rd., St.Jacobs, Ontario, Cana-

da, N0B 2N0. Call 519-664-3414, fax 519-664-2082 or visit www.stoneslinger.com.

Stone Slinger™ is aCanadian and U.S. regis-tered trademark of W.K.Dahms Mfg. Ltd.

John Da Silva of Rock Concrete Forming has been run-ning the first new Stone Slinger with remote-operatedCreep Drive since the Spring of 2011.

The heart of the Creep Drive system is this CAN Bus pan-el which controls the hydraulic drive system and commu-nicates with the operator's remote control console.

John Da Silva and his crews are able to reposition theStone Slinger truck while they control the conveyor sys-tem from anywhere on the jobsite.

Stone Slinger Creep Drive helps operators to place ag-gregates more accurately in less time, with less effortand with less wasted material.

Slinger from 9

Ap

ril 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

12

SOUTH HAVEN, MN —Combining superiorquality rigid frame engi-neering with the provenbenefits of tension fab-ric, Legacy Building So-lutions introduces itsLegendary Building Se-ries, the industry’s firstline of fabric buildings toincorporate structuralsteel beams instead ofopen web trusses. Thisnew engineering conceptprovides a high level offlexibility for a widerange of applications, in-cluding transfer sta-tions, recycling facilitiesand storage buildings.

Legacy buildings uti-lize a durable rigid framein place of the hollowtube, open web trussframing traditionallyused for fabric buildings.Unlike hollow tube steel,Legacy’s solid structuralsteel beams are not vul-nerable to unseen corro-sion originating inside atube. Additionally, thestructural steel has mul-tiple coating options, in-cluding hot dip galvaniz-ing, red oxide primer andpowder coat paint.

The strength of thestructural steel frameprovides several engi-neering advantages,most notably the flexibil-ity to customize build-ings beyond the confinesof standard sizes to theexact width, length andheight required. The de-sign allows for muchwider doors than possi-ble with web truss, andadding side doors is sim-ple as well. Structurescan be modified to pro-vide desired eave exten-sions and interiorcolumns. They can alsobe engineered to handleadditional loads for con-veyors, sprinklers andeven commodity loads onthe sidewalls.

Legacy buildings featurehigh quality polyethylenefabric roofs that eliminatethe corrosion concerns as-sociated with metal con-structed facilities. A widevariety of PVC fabrics arealso available. The durablefabric allows natural lightto permeate the structure,while insulation can beadded to meet energy

codes when required.Installation is faster

than with conventionalbuildings, and the de-sign can be adjustedfor stationary orportable applications.Sidewalls can be cus-tomized and built withany desired material —including steel, panel-ing or siding — andthen easily lined withfabric to prevent corro-sion to the interior.Legacy steel compo-

nents and fabric cov-ers are backed by a 15year warranty.

Legacy offers assis-tance from concept tocompletion, includingrenderings, foundationdesign, installation andproject management. Todate, Legacy’s in-house,professional installationcrews have constructedover 25-million-square-feet of fabric buildings.

Legacy Building Solu-tions specializes in the

innovative design, engi-neering and construc-tion of fabric-coveredbuildings for several dif-ferent industries and ap-plications. For more in-formation, contact Lega-cy Building Solutions,19500 County Rd. 142,South Haven, MN55382. Call 320-259-7126 or 877-259-1528,or visit the company’swebsite at www.legacy-buildingsolutions.com.

Chadwick BarossChelmsford, MA

New England

W.M. BiersPort of Albany, NY

NY & CT

W.E. TimmermanWhitehouse, NJ

Northern NJ

Dave Heath & Assoc.1-800-228-8032

Legacy the first to offer tension fabric buildings withrigid frame, structural steel

Legacy buildings utilize a durable rigid frame in place ofthe hollow tube, open web truss framing traditionallyused for fabric buildings.

Pag

e 13• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Ap

ril 2012

by Dave Whitelaw,Gr inderGuy@askthe-grinderguy.com

The U.S. Composting

Council held their 20thAnnual Meeting and TradeShow in Austin, Texas,January 18-20 2012.

The approximate 800companies of the organi-zation discussed indus-try issues regarding

landfill ban repeals, foodwaste composting, ero-sion control and receivedfurther educational

training on compost reg-ulation among others.

Cary Oshins, Educa-tion Programs managerof the USCC, said thisyear’s nearly 800 atten-dees also discussedequipment technologywith more than 50 ven-dors over the two days ofthe Trade Show event.

The exhibitor equip-ment was on display onFri., January 20, at thelive demonstrationwhich was held at TexasDisposal’s beautiful Ex-otic Game Ranch inTravis County, Texas,which houses over 2000

exotic animals from allover the world. Theranch is located onTexas Disposal’s landfillproperty, but with therolling, wonderfullylandscaped hills andbeautiful animals roam-ing peacefully about, onewould never know theywere on a landfill.

Over 20 exhibitorsdemonstrated shred-ding, grinding, screeningand windrow turningequipment.

Find out more aboutthe USCC @ www.com-postingcouncil.org.

Locks Both Doors of Your StorageContainers or Semi Trailers 53 ft. Van Trailers 1994 through 2002,

Spring and Air Ride Available, SwingDoors, Starting at $3,950 and Up -

Ready to Work

8’x10’ Steel Storage Containersw/Roll up Doors $2,050

SurplusContainers.net

BUY DIRECT From The Depot

WE DELIVER • 20’, 40’, 45’ Hi Cubes

DELIVERY AVAILABLECheckCards

40’ Open Steel Containers, Complete withRefurbished Chassis, Ready to Work $9,950

888-826-8545888-826-8545336-345-1921336-345-8250

Scrap Hauler

NAP

Only$14950

USCC holds 20th annual Conference

Ap

ril 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

14

by Dawn Buzynski, Two Rivers MarketingOver the last decade, Jerry Atkinson, general

manager for Bell County Water Control andImprovement District No. 1 (WCID No. 1) in Killeen,Texas, would watch biosolids from the District’s threewastewater plants being hauled away for disposal atvarious land sites thinking, “There must be a betterway.”

Atkinson said they were spending close to $75,000each year to dispose of biosolids, residual byproductsof wastewater treatment. At the same time, the city ofKilleen was having a problem with disposal of brushand green waste as well. It seems that both theseentities were destined to collaborate to provide a solu-tion for both issues and at the same time, offer a

valuable service to its residents and customers. As aresult, in August 2011, the Bell County WCID No. 1Regional Composting Facility opened.

“That was the first day we began bringing biosolidsfrom our wastewater treatment plants to thecomposting facility to begin the process of making abeneficial end product, which is compost,” saysAtkinson.

250 tons of sludge The Texas Legislature established Bell County

WCID No. 1 in 1952. The District serves more than275,000 people in the region including municipalitiesof Killeen, Copperas Cove, Harker Heights, Nolanville,Belton and the largest U.S. Army base in the world —Fort Hood. Each day, more than 90 million gallons of

material flows in and out of the water treatmentplant.

Before composting, on any given week, approxi-mately 250 tons of Class B biosolids, commonlyknown as sludge, would be loaded onto trucks andtransported from the wastewater plants to permittedland specified for biosolids disposal. In 2005,Atkinson says they seriously began to look at alter-natives to this dumping process.

“At that particular time, the district was disposingits biosolids on beneficial land use sites. In otherwords, we were applying the biosolids to the land,”says Atkinson.

The process was quite burdensome, he explains.And, it was costly. Just to apply for a permit for abeneficial land use site cost the district $35,000.They even tried working with private landowners toavoid the permitting process. Still, costs to disposesolids ran up to $75,000 per year.

It was during this time that an article in the KilleenDaily Herald reported that the city was having a prob-lem with determining what to do with its brushcollection. The city hauled brush and green waste toa landfill near a transfer station. The district’s boardof directors began discussions about a regional com-post facility that would take these two waste productsand create a beneficial product.

Feasibility studyOnce the decision was made to pursue the prospect

of a compost facility, the District went to LockwoodAndrews & Newnam, Inc. (LAN) an environmentalengineering firm in Houston. They are known fortheir experience in the design and build of publicworks and energy facilities. In the past, the districthad worked with LAN when it built its newest waste-water treatment plant.

“LAN has environmental and wastewater divisions,so they are not rookies with a project like this,”Atkinson says. “They have the experience withbiosolids management, the permitting of these typesof facilities and the understanding of what was need-ed for a viable, solid state of the art facility.”

The first order of business was to conduct a feasi-

BELL 15

A load of brush goes into the HG6000 where it is ground into mulch that will be mixed with biosolids.

WWaste not want not:aste not want not: FFrom sewage torom sewage tosustainable compostsustainable compost

Texas water treatment district takes holistic approach to biosolids composting

Windrows of material in various stages of development are placed on a paved surface for environmental securi-ty and ease of handling.

Jerry Atkinson, general manager for Bell County WCID No. 1,led the way in developing the new composting facility.

Pag

e 15• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Ap

ril 2012

BELL from 14bility study. Many issues had to be considered andresolved before a shovel could break ground.Environmental work and finding a location for thefacility, needed to take place. Talks began with theCity of Killeen to lease the property where the city wascurrently disposing of its brush. It was quickly deter-mined that this site was the most conducive to acompost facility, and the city agreed to a long termlease for 20 acres of land for the facility.

From that point, the district and LAN startedvisiting other compost facilities where they observedthe site layout and how others approached the com-posting process. Based on these observations,Atkinson quickly determined what would and wouldnot work in his district.

“We spent a year or so doing our homework,” hesays. “As we went around the state observing whatother sites were doing, the staff and I began to gath-er data on what we liked about other facilities andthings we did not like about them. We discussed theconvenience for the citizens and what our citizensmay like and not like in a facility.”

He determined that site layout was an importantfactor. The district wanted the most environmentallyfriendly layout with the least amount of intrusion andimpact on nearby residents. Much thought went intohow the facility would be designed. Safety was theprimary consideration.

It was decided that the brush grinding area wouldbe located in the back corner of the facility, far fromwhere employees work and traffic flows in and out ofthe facility. The newer windrows would be located inthe lower area of the site to stay out of the wind andminimize odors for area residents. “Finishingwindrows” would be located closer to the front forfinal screening and easy pickup.

Right on the moneyAfter the feasibility study, a scope of work was

developed and the arduous process to fund theproject began. The district and LAN set the budget at$4.5 million — $3 million for construction and $1.5million for equipment. One thing they wouldn’t do,Atkinson says, is have the resident customers footthe bill. The district did not want to skimp on whatthey had planned for the facility, so they decided towait on construction until the economic climate wasmore favorable.

“We did not want to burden the residents of thisarea with additional tax dollars or with an increase intheir water and waste rates,” he says. “So we deter-mined that we would build the facility with the moneythat we had. In 2008, the price of fuel had jumpedand construction costs were very high. It wasn’t until2009 when we began the bid process for construc-tion.”

The construction contract was awarded to F.T.Woods Construction Company of Georgetown, Texas.As construction moved forward, the next task was to

procure the necessary equipment for the compostfacility. Atkinson put this important task into thehands of his wastewater superintendent, WayneLovett and facility supervisor, Matt Atkinson. It wastheir job to research equipment manufacturers, holdinitial meetings and provide the recommendation forthe district. The staff made the recommendation toAtkinson to go with Vermeer® and Wildcat® equip-ment from Vermeer Texas-Louisiana.

“Vermeer captured our attention with their down toearth approach. They seemed truthful in what theywere telling us about their products. They seemedtruthful with how they would work with us, especial-ly if a problem would occur with the equipment. Thenthere was cost; Vermeer offered us a package dealthat saved the District a substantial amount.”

Bell County WCID No. 1 purchased a VermeerHG6000 grinder, a Wildcat CT718 compost turnerand a Wildcat TR521 trommel. Jeff Bradley, environ-mental application engineer for Vermeer Corporationand Wildcat products (a subsidiary of Vermeer),explains that they try to be different from other man-ufacturers in that they look at the entire applicationas a whole and not focus just on the equipment.

“As an application engineer, my focus in not on theequipment but what the customer is trying to accom-plish,” says Bradley. “We strive to provide the equip-ment suitable for their application. We want ourcustomers to see us as their partner; we want toshare our expertise to help them succeed. In turn,that makes Vermeer successful.”

The compost recipeThe recipe of the district’s compost is very basic. It’s

Class B biosolids and brush. The ratio is 1.5:1, brushto biosolids.

“We tried different ratio mixes,” says Wayne Lovett,WCID No. 1 wastewater superintendent. “We wantedto see what would work best for us. We built a fewrows and experimented with various mixes. The tem-perature was the indicator. We selected the mix basedon which came to temperature and held the best.”

Each day, brush is brought to the facility andprocessed into mulch, using the Vermeer HG6000grinder. Then biosolids from the wastewater treat-ment plants are placed in a holding area in anotherpart of the facility. From there the windrows arecreated.

Lovett explains that the process of building awindrow is like making a burrito. A layer of woodmulch is laid down first, then a layer of biosolids.

Then, they come back around with a second layer ofbrush. The ratio is 1.5 part of mulch to 1 partbiosolids. Once the “burrito” is in place, the CT718goes down the windrow and mixes it all together.

It takes approximately four days for the windrow tocome to temperature, anywhere from 115 to 160degrees Fahrenheit. If the temperature is not in thatrange, either they will add water to increase internaltemperatures or they will turn the pile to reduce theheat if necessary. The windrow will spend about 15days in this “cooking phase.” Then it will cure for 30days. After the 45 days, the compost is put throughthe trommel outfitted with a 3/8-inch screen. It isthen that the compost is considered finished andready for sale.

Three types of compost are available, each invarious grades. Contractors can order compost by thetrailer load. Even residents can drive in and helpthemselves to compost that is placed in self-servebins near the entrance.

A very clean productBell County WCID No. 1 is one of very few facilities

that go through the certification process from theU.S. Composting Council. According to Atkinson,samples have tested very well and the district cannow label its product with the U.S. CompostingCouncil’s Testing Assurance Program seal.

Part of the initial planning included development ofa marketing plan to build a customer base for thecompost. The district sent information on the facilityto landscapers, nurseries and Texas DOT contractorsin a 50 mile radius of the site. News releases went outand a grand opening was held in December 2011 withmore than 100 people from around the state attend-ing.

By the time the facility was open for business, theprice tag of the project landed around $3.3 million,which was $1.2 million less than budget. This includ-ed approximately $123,000 of landscaping tobeautify the area, including ponds populated withfish, a sprinkler system and a working windmill. “Wedid not cut any expense in making the facility attrac-tive to the people who were going to use it,” Atkinsonsays.

Atkinson says they expect to compost approximate-ly 35,000-cubic-yards in the first year, making theBell County WCID regional compost facility thelargest in Texas. “I think it’s important to understandthat before we sold one load, we were saving money,”says Atkinson.

Vermeer's total approach to providing equipment for the application, makes Bell County's facility a pictureperfect operation.

Yard waste is loaded into the Vermeer HG6000 for initialgrinding.

Ap

ril 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

16

HUGER, SC — Aftercommissioning a new370,000-pound SEN-NEBOGEN scrap handlerat the Kinder Morgan En-ergy Partners barge facili-ty in the Port ofCharleston; the truck fleetuse was reduced by 25percent while still keepingpace with customers’ de-mand for material.

Faster turnaround forKinder Morgan’s fleet of100 ton haulers and re-ducing the impact of ris-ing fuel costs were themain points when SEN-NEBOGEN approachedKinder Morgan with theconcept of the 880 R-HDmaterial handler threeyears ago. “We move be-tween 1.5 and 3.5 milliontons of material out ofport here every year,”says Terminal ManagerDaryle Wall. “The vol-umes of our facilities inthis area have providedus with experience usingevery kind of materialhandler, crane or excava-tor you can name. Wewere already looking foran alternative in 2007,when SENNEBOGENcame to us with their ideafor the largest electricdrive scrap handler in thecountry. We saw that wehad as good a location asyou’d want for this type ofmachine, so we decidedto work with SENNEBO-GEN on the project.”

Constantino Lannes,president of SENNEBO-GEN LLC, welcomedWall’s interest in theproject. “It took a leap offaith for Kinder Morganto step up to the 880 R-HD,” he says, “but theirapplication here andtheir experience with ourequipment made themthe ideal partner. SEN-NEBOGEN led the adop-tion of electric drive ma-terial handlers in Ameri-ca. No one had producedan electrically poweredunit as large as this, sowe needed a test bed toprove the engineering.

The 880 R-HD wouldbe a prototype, and itwould take time to buildand refine the new ma-chine. “We knew we were

the guinea pigs. We did-n’t know if it would work,but we wanted to try be-cause of the future sav-ings which, with the wayfuel costs have gone up,

turned out to be a prettygood decision,” saidWall. Since the new ma-chine went into opera-tion, diesel deliveries aredown more that 20 per-cent, saving the facilitysignificant costs on amonthly basis.

More throughputwith a smaller bite

At Kinder Morgan’sBerkeley Operations, afleet of haul trucks carryup to 140-cubic-yard perload from the dock tonearby stockpiles. Atdockside, the unloadingfacility had been usingrope cranes fitted with22 yard grapples. Thegrapple on the 880 R-HD

machine is half the size,with just a 10-yard ca-pacity, but it keeps thetrucks cycling faster,with larger loads. “Ourother cranes are big andrun much slower for thejob,” says Wall. “Theycouldn’t accurately fillup the corners of thetruck like you can with

the smaller grapple. Thetrucks are moving moretowards their capacity at140-cubic-yard than the110 to 120-cubic-yardwe were getting. The 880R-HD can also run twocomplete loading cyclesper minute into the

2 WaysTo Win!!!

55 EEAASSYY WWAAYYSS TTOO PPLLAACCEE AAWWAASSTTEE HHAANNDDLLIINNGG EEQQUUIIPPMMEENNTT NNEEWWSS

CCLLAASSSSIIFFIIEEDD AADD

FOR BEST RESULTS, RUN YOUR AD FOR TWO ISSUES!

Cost per issue:$15.00 for the first 14 words,

50¢ each additional word.(Phone #’s count as one word)

Number of issues to run_____

1.Phone it in - Just give Peggy a call at 1-800-836-2888

Faxx itt in - For MasterCard,Visa, AmericanExpress or Discover customers...

Fill out the form completelyand fax to Peggy at (518) 673-2381

2.

Maill itt in. Fill out the form, calculate thecost, enclose your check/money order orcredit card information and mail to:

Waste Handling Equipment News Classifieds,PO Box 121, Palatine Bridge, NY 13428

4. E-mail your ad toclassified@leepub.com

Go to www.wastehandling.comand follow the Placee a

Classifiedd Ad button toplacee yourr add 24/7!

Place a Classified Ad in Waste Handling Equipment News 2 Mail in This Sweepstakes

Entry FormName _

Co./Farm Name _

_

Address _

_

City _

State Zip _

Phone( ) _

E-Mail _

Birth Date / / _

Entries must be dated before June 1st, 2012. Employees & relatives of employees of Lee Publications Inc., John Deere, Zahm & Matson are not eligible. Must be 18 years of age.

Mail to WHEN, PO Box 121, Palatine Bridge NY 13428

1

Enter Now

To Win A

John Deere

Gator!

Enter Now

To Win A

John Deere

Gator!

SWEEPSTAKES

3.

5.

JohnDeereGator825:4x4

SENNEBOGEN accelerates turnaround, reduces cost inCharleston Port with supersized electric drive scrap handlerThe port facility receiving scrap metals for thenearby steel mill is now unloading barges andfilling haul trucks 25 percent faster with its

SENNEBOGEN 880 R-HD material handle.

SENNEBOGEN 17

Pag

e 17• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Ap

ril 2012

trucks, against just onecycle with the old ma-chine. The turnaround forour trucks is faster, sowe’re unloading the bargesfaster and doing a betterjob for our customer.”

The crawler mountedmaterial handler simpli-fies the unloading opera-tion further by beingable to traverse the

length of the dock underits own power. A poweredtether line allows themachine a 400 -footrange of movement toposition itself for unload-ing either of two bargesat the dock. With thismobility, there’s no needto winch the barges intoplace under the crane.

Peterson Pacific 5400 CAT 800 hp - Call for more Info - Smokin' Deal!! . . . . . . . . . . . . . . . . . .$105,000Doppstadt 720 Trommel Screen approx. 300 hours Excellent Condition! . . . . . . . . . . . . . . . . . .$260,0002005 Morbark 6600 CAT 3412E 1000 hp approx. 1900 hours . . . . . . . . . . . . . . . . . . . . . . . . . . .$339,0002010 Vermeer HG6000TX Approx. 1800 hours Very Good Condition . . . . . . . . . . . . . . . . . . . . .$385,0002008 Morbark 1600 CAT C27 1050 hp IQAN system Magnet Approx. 1425 hours . . . . . . . . . . $489,0002003 Morbark 1300 CAT 1000 hp engine approx. 4500 hours Good Condition! . . . . . . . . . . . . .$190,0002003 Morbark 7600 CAT 3412E 1000 hp engine approx. 3000 hours VERY NICE! . . . . . . . . . .$275,0002007 Morbark 2755 Chiparvester Approx. 3800 hours VERY Good Condition! . . . . . . . . . . . . . $499,0002008 Morbark 3800 John Deere 630 hp approx. 1500 hours Very Good Condition! . . . . . . . . .$265,0002006 Vermeer HG6000 CAT C16 630 hp engine approx. 2800 hours . . . . . . . . . . . . . . . . . . . .$189,0002000 CBI 4000 CAT 3412 800 hp approx. 4000 hrs, Good Condition . . . . . . . . . . . . . . . . . . . . .$149,0002004 Morbark 3600T CAT 525 hp engine approx. 1000 hours, Lower Price! . . . . . .$240,000 -$229,000 2005 Morbark 6600 approx. 4500 hours good condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $295,0002008 Morbark 4600XLT CAT C27 875 hp Tier 3 approx. 1800 hours . . . . . . . . . . . . . . . . . . . . .$410,0002006 Morbark 1300A approx. 5900 hrs Recent updates, Ready to Work . . . . . . . . . . . . . . . . . .$295,0002007 Peterson Pacific 4710B approx. 4000 hrs CAT 765 hp engine . . . . . . . . . . . . . . . . . . . . .$270,0002004 Morbark 6600 approx. 3200 hours CAT 1000 hp engine . . . . . . . . . . . . . . . . . . . . . . . . . .$299,0002006 Bandit Beast 4680 CAT 3412E 1000 hp. Approx. 2200 hours . . . . . . . . . . . . . . . . . . . . . .$299,000

Call or Visit us online to see more equipment & picturesprimarymachinery.com

P.O. Box 4613, Salem, OR 97302Office 503-588-8312 • Toll free 888-680-3433

Cell 503-602-3433 • michael@primarymachinery.com

Have a Grinder,Chipper or

Trommel Screen youwould like to sell?

We can help! Give us a call Toll Free

888-680-3433

New and Used RecyclingEquipment

2004 Morbark 950 W/Coloring unit, 200hpunder 300 Hours! Excellent Condition,

New Lower Price! $85,000 $72,500

Late Model McCloskey 512R Approx. 1300 hours Used in mulch applica-

tion, Very Nice! $115,000

2002 Peterson Pacific 5400CAT 800 hp engine, approx. 2800 hours

$149,000

1993 Morbark 3036 CAT 300 hp engine,air compressor, many extras, Nice straight

machine ready to Go!

$62,000

2002 Vermeer HG525CAT 525hp engine approx. 2400 hrs, many

recent updates, Very Nice! $165,000

NEW LOWER PRICE $150,000

Grinder Sale

Stu 630-986-6018Darin 309-208-4568

Stewart 517-206-5512 Greg 314-960-0920Gary 317-509-3278Financing Available

Year Make Model Serial # Hours Price Location Contact2006 Vermeer TG7000 00123 1433 $425,000 Fishers, IN Gary

2006 Vermeer TG525 00237 $180,000 Aurora, IL Stu

2002 Vermeer TG400 00528 $130,000 Aurora, IL Stu

1999 Vermeer TG400A 00481 5400 $81,000 Jackson, MI Stewart

1998 Morbark 1200XL 67467 4290 $98,000 Ft Wayne, IN Gary

1997 Morbark 2348 00117 9900 $78,400 Eureka, IL Darin

3-Vermeer TG7000’s Call For Price Aurora, IL Stu

2006 Vermeer TG70002006 Vermeer TG525 1999 Vermeer TG400A

ThinkSpring

USED EQUIPMENT SHOWCASEReaching recycling and aggregateindustry professionals across theUnited States in one easy section.

This section is dedicated to usedequipment and auctions ONLY!

Lookingg forr apiecee of

equipment?Here’ss your

placee too findd it!

Lookingg too selll usedd equipment?Here’ss yourr placee too selll it!

Forr Moree Informationn ContacttWendelll Jennings •• 518-673-0114

Lee Publications, Po Box 121,6113 State Hwy 5 Palatine Bridge, NY 13428

USED EQUIPMENT SHOWCASE

This SENNEBOGEN 880 R-HD electric drive scrap han-dler in Charleston is moving more material with its 10-yard grapple than the facility's former rope crane pro-duced with a grapple twice the size.

www.wastehandling.com SENNEBOGEN from 16

SENNEBOGEN 20

Ap

ril 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

18

Brought to you by:Country Folks,

Country Folks Grower,Wine & Grape Grower,

Hard Hat News, Mane StreamWaste Handling Equipment News,

North American Quarry News,Small Farm Quarterly and by

Lee Publications Inc.Palatine Bridge, NY 13428

www.leepub.com (800) 218-5586

www.aaauctionfinder.com REGISTER FREE!!!Find Auctions Near You!!

Auctioneers Register FREE!!List all your upcoming auctions with us!!

Pag

e 19• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Ap

ril 2012

LC Whitford Equipment Co., Inc.4316 Bolivar Rd.

Wellsville, NY

FOR SERVICE, SALES AND PARTS -1-800-321-3602Web site: www.lcwhitford.com Email: sales@lcwhitford.com

Morbark Rayco Timber Pro Barko B&B Trailers

2006 John Deere 648G Series III4x4 Skidder/Grapple - Call for Pricing

2008 Rayco Super RG50, RepoMachine, Only 154 hours!

Call for Pricing

1998 Morbark 1300 Tub Grinder, 750 HP Cat Engine, Recent Rebuild,

Priced to Sell! - Call for Pricing

2011 Morbark 3800XL TrackWood Hog, Horizontal Grinder,

800 HP Cat-Money Maker!

2012 Rayco T350 Super CrawlerNow Taking Orders!

Morbark Beever M18R -Single, Dually orTandem Your Choice! -140HP to 275HP!

Fall Clearance Specials - Don’t Miss This Sale!

2012 New! Rayco 1635TSJTrac Self Propelled Stump Cutter,

47” wide cut $19,750

2004 Morbark Hurricane 18” Chipper,180-HP, Tandem W/Winch,

Priced to sell - Call for Pricing

CHIPPERS

20122 Morbarkk Beeverr M15R Cat 142HP, New and Unused! . . . . . . . .Calll forr Price

20122 Morbarkk Beeverr M18R,, Cat 213HP, Tandem Axle - Nice! . . .Calll forr Price

20111 Morrbarkk 3800XL Track Wood Hog, horizontal grinder, 800 HP Cat -FinancingAvailable-Trades welcome! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Pricee

20066 Morbarkk Blizzardd 12 Auto Feed, Needed TLC and Got it Here! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price

20044 Marbarkk Hurricane 18” Chipper, Tandem w/Winch, 180 CAT, Recent Trade In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Callll forr Price

STUMP GRINDERS

Speciall Discountss onn Alll Inn Stockk Stumpp Cutterss -- Calll Forr Price!

20122 Raycoo 1645SJR,, Swing Out Controls, 4X4, Blade, Trailer - New Model! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Calll forr Price

20122 Raycoo RG-100X,, 99HP Kubota, Trailer . .Calll forr Speciall Springg Pricing!

20111 Rayycoo RG16355 Trac Stump Cutter, trailer . . . . . . . . . . . . . . . .Calll forr Price

20100 Raycoo 1635SJR with trailer, beat the tax man, call to find out how! Calll forr Price

MISCELLANEOUS

Morbarkk “Mutt”” Forestryy Loader, Comes with Grapple & Stump Splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price

FAE,, UML/SSLL 125, mower attachment, used . . . . . . . . . . . . . . . . . .Calll forr Price

FAE,, UMMM EXX 125, mower attachment, used . . . . . . . . . . . . . . . . . .Calll forr Price

Raycoo && RRockland log grapples, used . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price

Davco mower attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price

Rotobec grapple with RT252 rotator . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price

Bobcatt LR5A landscape rake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price

For Sales, Service or Parts Call 1-800-321-3602 or E-Mail: sales@lcwhitford.com

2009 Morbark 4600XL Wood Hog,Exc. Cond., Cat 875HP, Remote,

Mag End Pulley, Low Hours

Affordable

Ap

ril 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

20

Electric is simplerAlong with the fuel

savings, Wall says thatswitching to electricdrive saves other operat-ing costs as well. “Wedon’t have to worryabout oils, lubricants orengine rebuild costs,”Wall continues. “With adiesel engine, you havethe possibility of over-heating, which is com-pletely eliminated withthe electric motor. Theelectric motor is a muchbetter solution, causingless downtime. Electricis simpler, much morereliable, much more “ac-curate” so it eliminatesoverheating. And it’s qui-eter, so it’s even betterfor the operators.”

Wall notes that theSENNEBOGEN cab wasalso welcomed by his op-erators. “With the cabextended up and out, theoperators are able toview the entire barge atonce. We have operatorsasking to transfer downhere for that job!”

Commitmentpays off

Having taken a risk tocollaborate with SEN-NEBOGEN on commis-sioning America’s first880 R-HD, Wall says thenew machine has morethan met expectations. “Ican’t give enough creditto the SENNEBOGEN

service team, Jim West-lake and Bob Marean.They worked through allthe ‘interesting’ chal-lenges that came upalong the way — there’reno better guys out there.Being so new, thereweren’t a lot of mechan-ics anywhere trained onthis, but they and ourdealer’s mechanics havebeen great about comingout and working along-

side our mechanics.And, they’re continuingto stay in touch, monitorthe machine’s use andservicing, along withtalking to our operators.”

“We all committed tothis project and it hastaken us out furtherthan we ever dreamed,”Wall concludes.

SENNEBOGEN hasbeen a leading name inthe global material han-

dling industry for nearly60 years. Based in Stan-ley, NC, within thegreater Charlotte region,SENNEBOGEN LLC of-fers a complete range ofpurpose built machinesto suit virtually any ma-terial handling applica-tion. Established inAmerica in the year2000, SENNEBOGENLLC has quickly becomea leading provider of

specialized equipmentsolutions for recyclingand scrap metal yards,barge and port opera-tions, log handling,transfer stations andwaste facilities fromcoast to coast. A growingnetwork of distributorssupports SENNEBOGENLLC sales and serviceacross the Americas, en-suring the highest stan-dard of professional ma-

chine support and partsavailability.

For more information,contact ConstantinoLannes, president, SEN-NEBOGEN LLC, 1957Sennebogen Trail (for-merly 7669 Old PlankRd, Stanley, NC 28164.Call 704-347-4910 or fax704-347-8894, e-mailsales@sennebogenllc.com or Visit www.sennebo-gen-na.com.

SENNEBOGEN from 17

Pag

e 21• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Ap

ril 2012

TEMPLE, TX — TexasHydraulics, Inc., the pre-

mier solution provider inhydraulic cylinder tech-

nology, announces thatit will showcase its Inte-

grated Hydraulic Cylin-ders and Refuse Design

Cylinders in Booth No.6014 at WasteExpo2012. The show, whichbrings together a widevariety of leaders fromboth the private andpublic sectors of thewaste management in-dustry, will be held fromApril 30 to May 2, 2012,in Las Vegas, NV.

The typical hydraulicsystem utilizes a sepa-rate pump, motor, linemounted valves or mani-fold, hoses, fittings andreservoir, while TexasHydraulics’ Fully Inte-grated Hydraulic Cylin-

ders combine all of thesecomponents into onecompact assembly. FullyIntegrated Cylinders areideal for any applicationwhere performance, en-ergy efficiency and envi-ronmental concerns areat a premium. Theseself-contained, “plug &play” custom cylinderscan eliminate the needfor hoses, fittings andmost of all, costly instal-lation time, all while re-ducing the number ofpotential leak points sig-

Texas Hydraulics to feature Refuse Design Cylinders and Integrated Hydraulic Cylinders at WasteExpo 2012

Based on extensive cycle and fatigue testing, theserugged “Texas Tough” cylinders can perform up to 10times better than competitive designs.

Texas 24

Ap

ril 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

22

As the nation’s infrastructure becomes increasing-ly in need of repair or total replacement in manyplaces, a sustainable supply of quality aggregates forhighway construction becomes more important.According to the United States Geological Survey(USGS), the demand for all types of aggregates in2007 and 2008 was approximately 2.5 to 3 billiontons per year. More importantly, the Federal HighwayAdministration (FHWA) estimates the annual need forpavement aggregates at approximately 700 milliontons. Bill Langer, a USGS aggregates researchgeologist, notes that in order to meet the current and

future infrastructure needs over the next five years, a70 percent increase in annual aggregate productionmay be required. Therefore, it is with this increasingneed that recycled concrete becomes an importantresource. Recycled products can replace virgin mate-rial.

CalCrush of Ripon, CA recognized this need morethan a decade ago. It was April 12, 2000 when theyfirst began recycling concrete paving materials.According to Charlie Evans, primary owner ofCalCrush, the company recycles an array of rawproducts ranging from concrete, asphalt and brick, to

block and tile, all originating from sources through-out California and northern Nevada. He said thatthese recycled materials ultimately become roadbase, rip rap, manufactured sand and other aggre-gates designed for asphalt and concrete.

Evans said that CalCrush chose the IROCK TS-512screen plant because it fits well with many differenttypes of rock crushers. When outfitted with the trackpropulsion system, the TS-512 is able to get intosmall and tight jobsites. With this kind of flexibilityand portability, the crews can process material whereit is stockpiled. This saves customers the cost ofhauling raw materials from the stockpile to thecrusher.

CALCRUSH 23

The IROCK TS-512 is a 100 hp tracked screener with a 9.2-cubic-foot feeder capacity.

CalCrush has the reliability they CalCrush has the reliability they need with IROCK screen plantsneed with IROCK screen plants

by Gwen Pernie

CalCrush owners Charlie and Cheryl Evans stand out-side of their Ripon, CA headquarters.

Anthony Beato serves as the general manager of CalCrush, Ripon, CA.

Pag

e 23• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Ap

ril 2012CALCRUSH from 22

Since buying the first one from Maxim Equipmentof Stockton, CA, CalCrush purchased a second TS-512. “We acquired one in 2010 and the second in2011,” he said.

“One of our TS-512 is currently working on-site atthe Edwards Air Force Base,” Evans said. “It’s screen-ing behind a tracked 3055 jaw crusher. We are mak-ing three different concrete products with it, a 4x2-inch, a 2x1-inch and a 1-inch minus. Our other TS-512 is on location screening material behind atracked 4250 horizontal shaft impactor. That one ismaking 3/4-inch minus aggregate base.”

Evans added that they have also been impressedwith the TS-512’s production rate. “We can get 300plus tons per hour past the 5x12-foot screen box,” hesaid. “That is a tall order for a 5x12-foot box tohandle, but the IROCK is up to the challenge.”

“One of the unit’s greatest assets is its simplicity. Itis not overly automated, so you don’t have to be a

rocket scientist to work it. We like the idea that some-one with entry level training is able to operate andmaintain the equipment. It is also very fuel efficientand so far very reliable,” he said.

Sean Donaghy, national aales manager for IROCKCrushers LLC, added, “The set up time of the TS-512is quick and efficient due to its integrated compo-nents and systems. In addition, the layout of the unitis convenient. Its easily accessible components andsystems make repairs simple.”

He noted that the IROCK TS-512 Tracked Screenerweighs 59,535-pounds and is 9-feet 10-inches wide,51-feet 10-inches long and 10-feet 6-inches high.

He added that the top deck screen dimensions are12x5-feet and the bottom deck are 10-feet 4-inches x5-feet with a feeder capacity of 9.2 cu/m. It ispowered by a Cat C4.4 TA (TIER III) 100HP engine.

For more information on CalCrush please visitwww.calcrush.com or contact Anthony Beato,CalCrush general manager, at 209-564-2942 orAnthony@calcrush.com. For more information onMaxim Equipment visit their website atwww.maximequipment.com/index.html or call 209942-3000.

by Gwen PernieAccording to Sean Donaghy, national sales

manager for IROCK Crushers LLC of OakwoodVillage, Ohio, the IROCK TS-512 tracked portablescreening unit, is a relatively new product to theIROCK Crusher line. It has been manufacturedsince 2010. The tracked screener offers a wide rangeof applications such as sand, gravel, topsoil andaggregates. “Several big advantages of the screeningplant is that they reduce energy costs because oftheir technologically advanced engine systems,” hesaid.

IROCK Crushers LLC is located in OakwoodVillage, Ohio. It started doing business in 1991under the ownership of Ken Taylor. IROCK suppliesproducts to the United States and Canada providinga full line of portable crushing and screening plants.The IROCK line is designed for use in processingquarry rock, sand and gravel, recycled asphalt,concrete and demolition debris with typical produc-tion rates of 50-650. For more information onIROCK crushers and screeners, contact SeanDonaghy at 330-931-9595 or e-mail sale@irock-crushers.com.

IROCK Crusheroffers high volumescreeners as well

Brian Evans operates a CAT 325C excavator, as he loads concrete debris into one of CalCrush's portablecrushers.

Brian Evans loads the hopper on one of CalCrush's portable crushers.

Screened material is conveyed to a stockpile for futuresale.

Ap

ril 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

24

Spare Parts Custom Made Screens For AllManufacturers & Models

Bucket LinersHammer BarsSplit SprocketsAugersRebuild & New Rotors* All FabricationProducts Are Available inAR450 Plate

Most parts custom fabricated and shippedwithin days not weeks!

Pictured are just a few samples of our quality work

Morbark Grinder Screen

Roto Chopper Screen Jones Grinder Screen

Split Sprockets

Front Wear Liner for the Jones Grinder

Now Available Duragrind Hammers

Call us for your parts needs.

Phone: 301-722-4030Fax: 301-759-4064

E-mail: Roy@potomacmetal.comCell: 301-697-3898

Visit our web site: www.potomacmetal.comPO Box 141512001 Siebert Rd. SE, Cumberland, MD 21502

With direct fromthe manufacturer

pricingGrind More –Change LessCall Your Dealer Today For More Information

COMPANY WRENCH4805 ScoobyLane Carroll, OH 43112(P) 740-654-5304

Toll Free 866-262-4181

Cleveland, OH Branch525 Golden Oak Pkwy

Oakwood Village, OH 44146(P) 440-439-4567

Piketon, OH Branch3668 US Route 23 South

Piketon, OH 45661(P) 740-289-3294

Washington, PA Branch400 West Beau St

Washington, PA 15301(P) 724-222-2447

Indianapolis, IN Branch7019 Brookville Rd

Indianapolis, IN 46239(P) 317-375-7790

Cookeville,TN Branch1220 Southside Dr

Cookeville, TN 38506(P) 931-526-6222

Rineyville, KY Branch6300 Rineyville Rd

Rineyville, KY 40162(P)270-360-1010

Aiken, SC Branch1252 Old Kimbill Trail

Aiken, SC 29805(P) 803-642-0060

Jacksonville, FL Branch4710 Dignan Street

Jacksonville, FL 32254(P) 904-268-6554

Plant City, FL Branch2812 Airport Rd

Plant City, FL 33563(P) 813-754-5800

Pasco, WA Branch2300 N Commercial Ave

Pasco, WA 99301(P) 509-728-6614

NJ Branch(P) 740-422-6045(P) 609-313-0720

MIDLANTICMACHINERY

2240 Bethlehem PikeHatfield, PA 19440

215-822-0145Fax 215-822-7971

nificantly. Thanks to their self-con-tained design, the potential for con-taminant ingress into the hydraulicsystem is greatly reduced. Texas Hy-draulics’ Fully Integrated HydraulicCylinders can also operate solely onbattery power, making them ideal forsolar applications or on sites where nooutside electricity is available. Thesedurable, welded cylinders can also fea-ture position sensing, overload protec-tion, regenerative circuits, load lock-ing, thermal protection, proportionalflow control and many other features.

Texas Hydraulics will also be show-casing its Refuse Design Cylinders,which are specifically designed as cus-tom solutions within the waste man-agement industry. Based on extensivecycle and fatigue testing, these rugged“Texas Tough” cylinders can performup to 10 times better than competitivedesigns. Recognizing the stresses oncylinders in challenging refuse applica-tions, these cylinders also feature opti-mized welds that reduce stress con-

centrations, thereby increasing dura-bility and reliability. Based on the ap-plication, many utilize Texas Hy-draulics’ state of the art friction welder,thereby creating a stronger joint thatincreases acceptable cylinder tensileload and cylinder fatigue life.

When you have a difficult wastemanagement cylinder applicationthere’s only one team to call… TexasHydraulics. Problem Solved.

For more information on Texas Hy-draulics, Inc., please go to www.texas-hydraulics.com.

Texas Hydraulics, Inc., has beenproviding custom engineered hydrauliccomponents to leading original equip-ment manufacturers since 1968 andcontinues to expand its leading posi-tion in the custom hydraulic cylinder,swivel and related component mar-kets. Texas Hydraulics headquarteredin Temple, Texas is a Dover Corpora-tion company. For more informationon the company or its products, pleasevisit www.texashydraulics.com.

Texas from 21

Pag

e 25• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Ap

ril 2012

Ap

ril 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

26

STANLEY, NC — Thehallmark of D Seriesmaterial handlers fromSENNEBOGEN is theengineering focus onoperator safety andcomfort that led to thedistinctive maXCab op-erator station.

The maXCab’s mostvisible difference from

conventional operatorstations is its uniquesliding door design, cou-pled with a permanentcatwalk and guard railingto surround the cab en-try. The overall result isan entry and exit paththat is more open thanswinging doors can allow,with enough security that

operators can safely leavetheir cab without firstlowering it to deck level.Another handrail pro-tects the stairway thatleads up to the cab, sooperators take a continu-ously secure, guardedroute from the ground totheir work station.

Inside, the ergonomiclayout of operator con-trols affords a roomy feelthat’s enhanced by a 360degree view through tint-ed panoramic windows.

While clear visibilityfrom the cab helps to im-prove productivity, italso contributes to safetyby reducing operator fa-tigue through long work-ing shifts. The maXCab’sheated air suspensionseat adjusts to the indi-vidual preferences forreaching the controllevers and foot pedals.Automatic heating andair conditioning continu-ously self-adjusts the in-side air temperature

through eight separateair vents for an even,comfortable cab climate.

The maXCab is offeredwith a choice of SEN-NEBOGEN’s high risesystems which elevatethe cab to heights up to19.4-feet. As well asstandard vertical eleva-tion, option configura-tions include an articu-lating boom that allowsoperators to move thecab “up and out” overthe undercarriage, or to

tilt the cab forward for amore comfortable down-ward view.

SENNEBOGEN hasbeen a leading name inthe global material han-dling industry for nearly60 years. Based in Stan-ley, NC, within thegreater Charlotte region,SENNEBOGEN LLC of-fers a complete range ofpurpose built machinesto suit virtually any ma-terial handling applica-

“Maximum” safety and comfort with SENNEBOGEN Maxcab

Operator has clear 360 degree visibility.

Unique sliding door with permanent catwalk providesmaximum safety.

The seat adjusts as do the control levers and foot ped-als for maximum operator comfort.

Maxcab 27

Pag

e 27• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Ap

ril 2012

New model meets Tier4 interim emissions

requirementsRACINE, WI — Case

Construction Equipmenttoday launched itsCX470C full sized exca-vator. The machine is thenewest in the Case C Se-ries excavator line thatfeatures increased fuel

efficiency, productivityand improved servicea-bility and operator com-fort, while achieving Tier4 Interim certification.

The new Case CX470Cexcavator replaces thecompany’s CX470Bmodel. It features Tier 4Interim certified cooledexhaust gas recircula-

tion (CEGR) technologythat burns cleaner whiledelivering superiorhorsepower.

The CX470C, rated at362 net hp, is available inLong Undercarriage (LC),Retractable Undercarriage(RTC) and Mass Excava-tor (MEX) models, withoperating weights ranging

from 105,300 to 108,600-pounds. The CX470Cmodels are roughly 1,100-pounds heavier than theprevious model for im-proved capacity.

The CX470C MEX isdesigned for heavierloads and larger buckets(up to 4.13-square-yards), achieving higher

productivity in large ex-cavation jobs and highvolume truck loading.The Retractable Under-carriage version providesundercarriage widthadaptability for trans-port between jobsites.

“In today’s extremelycompetitive economy,contractors need ma-chines that will reduceoperating costs and boostproductivity. The newCase CX470C excavatordelivers both,” said TimO’Brien, brand marketingmanager, Case Construc-

tion Equipment. “The CX470C joins a

product line from Casethat sets new standardsin fuel economy, produc-tivity and operator envi-ronment,” O’Brien said.

Like other excavatorsin the Case C Series, thenew CX470C featuresCase Intelligent Hy-draulic System technolo-gy that reduces total fuelconsumption and im-proves performance.

Boom Economy Con-

tion. Established inAmerica in the year2000, SENNEBOGENLLC has quickly becomea leading provider of spe-cialized equipment solu-tions for recycling andscrap metal yards, bargeand port operations, loghandling, transfer sta-tions and waste facilitiesfrom coast to coast. Agrowing network of dis-tributors supports SEN-NEBOGEN LLC sales andservice across the Ameri-cas, ensuring the higheststandard of professional

machine support andparts availability.

For more informationon the full line of SEN-NEBOGEN green linematerial handlers, con-tact ConstantinoLannes, president, SEN-NEBOGEN LLC, 1957Sennebogen Trail (for-merly 7669 Old PlankRd.), Stanley, NC 28164.Call 704-347-4910 or fax704-347-8894, e-mailsales@sennebogenllc.com or visit www.sennebo-gen-na.com.

Maxcab from 26

New Case CX470C excavator sets new standards in fuel economy, productivity and operator environment

The CX470C MEX is designed for heavier loads and larg-er buckets (up to 4.13-square-yards or 3.16 m3), achiev-ing higher productivity in large excavation jobs andhigh volume truck loading.

The new Case CX470C excavator replaces the compa-ny's CX470B model. It features Tier 4 Interim certifiedcooled exhaust gas recirculation (CEGR) technologythat burns cleaner while delivering superior horsepower.

Case 29

Ap

ril 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

28

UU.S.S.. Composting Council’Composting Council’s 20ths 20thAnnual Conference and Annual Conference and TTrade Showrade Show

Gert, left, and Ralf Semler, representatives for Hammel NY LLC.

Rob Keese of Environmental Composting Services,landfill diversion specialists for organic materials.

Rick Cohen of Screen USA discusses screening applications with attendees.

Paul Andreas of the Allu Group answering questionsfrom show attendees.

Wayne Brown, VP, representing Apollo Equipment and Grinder Wear Parts.

The USCC’s 20th Annual Conference and Trade Show January17-20 was a huge success. Over 800 composting and organics

recycling professionals and more than 100 exhibitors attended theU.S. Composting Council’s 20th Annual Conference and Trade Show

in Austin, Texas. Hosted by 51 sponsors, the Annual Conferenceattracted a national and international audience, with representa-

tives from nearly every state and many countries including Australia,Canada, Columbia, China, Germany, Mexico, Nigeria and the UK.

Pag

e 29• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Ap

ril 2012

trol (BEC) automaticallyreduces engine RPMsand hydraulic power tothe boom when speedand power is not a prior-ity, such as when swing-ing back to the hole.Swing Relief Control(SWC) technology man-ages the hydraulic powerallotted at the start of theswing operation, andSpool Stroke Control(SSC) creates an auto-

matic pressure adjust-ment to meet demandduring digging opera-tions, but without build-ing unnecessary pres-sure. Then, the feature ofAuto Economy Control(AEC) lowers RPMs whenthe joysticks are inactive.

Also boosting fueleconomy and perform-ance are engine improve-ments such as comput-er-controlled fuel deliv-

ery and variable geome-try turbocharging, aswell as automatic match-ing of engine perform-ance and RPMs to powerdemands and hydraulicsystem requirements.

“Typical CEGR systemslose fuel efficiency, butwith the Case IntelligentHydraulic System tech-nology and engine im-provements, we’ve actu-ally increased fuel effi-

ciency on the CaseCX470C excavator by fivepercent over our previousB Series model,” O’Brienexplained. “And all of ourCase C Series excavatormodels continue to be inthe top of their class forproductivity.”

Increased productivity With up to five percent

faster cycle times thanthe previous model, thenew Case CX470C exca-

vator can move morematerial and load moretrucks per hour.

Along with faster cycletimes, the new Case ex-cavator offers operatorssmoother and easier con-trol and maneuverability.

The CX470C excavatorprovides six percent morelift capacity than the previ-ous B Series model. Withits standard arm length of11-foot 1-inch, the Case

CX470C excavator has amaximum dig radius of39-feet 4-inches, a maxi-mum dig depth of 25-feet4-inches and a dumpheight of 25-feet 5-inches.

The boom and arms,as well as the mainframeand undercarriage struc-ture, have been re-designed for this addi-tional capacity, deliver-ing improved, worldclass durability.

Its standard arm dig-ging force is 42,490-pound-foot and standardbucket digging force is55,530-pound-foot. Avail-able Power Boost technol-ogy increases both ofthese values by approxi-mately 10 percent.

The CX470C featuresa 172 gallon fuel tankand a 122 gallon hy-draulic system.

Improved operatorenvironment

“The Case CX470C ex-cavator provides a highlyfunctional and comfort-able environment for theoperator, an importantconsideration in achievingmaximum machine pro-ductivity,” O’Brien said.

Noise reduction im-provements, including vi-bration refinement on thecab’s reinforced tubularstructures, create an ex-tra quiet cab environ-ment, with automotivelike noise levels as low as72 dBa. “It’s like being ina car even when the exca-vator is running at fullthrottle,” O’Brien noted.

As in other eight per-cent. Standard rearviewand optional sideviewcameras feed video to a 7-inch high definition LEDmonitor in the cab, en-hancing operator confi-dence and jobsite safetyduring machine operation.

“The large, clear moni-tor in the Case C Seriesexcavators compares fa-vorably to what you’dfind in a luxury automo-bile,” O’Brien said. TheLED screen also presentsto key operating data, in-cluding a new functionwhich provides fuel con-sumption per hour. “Op-erators can use this in-formation to refine fuelefficiency for their partic-ular operation,” he said.

The machine’s low pro-file design also enhancesvisibility from the cab,efficiently accommodat-ing Tier 4 emission sys-

WESTCHESTER TRACTOR INC.60 International Blvd • Brewster, NY 10509

845-278-7766 • Fax 845-278-4431www.wtractor.com

CLEAVES CO. INC.300 Reservoir St.

Needham, MA 02194

781-449-0833

TYLER EQUIPMENT CORP.251 Shaker Rd.

East Longmeadow, MA 01028

800-292-6351 Fax: 413-525-5909

94 Union City Rd., Rt. 68

Prospect, CT 06712

800-352-4473

W. M. BIERS INC.Port of Albany

Albany, NY 12202

518-434-2747www.wmbiers.com

Case from 27

Case 31

Ap

ril 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

30

Equipment YouCan Count On

The worldwide network of Vermeer dealers makes the difference -get to know your local dealer. In the field or in the shop, nobody is more determined to see

you succeed. Vermeer is an innovative leader in the manufacturing of underground and tree-care equipment. They can also be your most valued partner in your day-to-day operations.

Vermeer Is Your Total Solutions Provider

Contact your dealer by calling 1-888-VERMEER,

or visit the Web at www.vermeer.com

VERMEER and VERMEER LOGO are registered trademarks of Vermeer Manufacturing Company in the

US and/or other countries.

© 2002 Vermeer Manufacturing Company. All Rights Reserved.

11220 Allisonville Rd.

Fishers, IN 46038

(317) 842-10403310 W. Coliseum Blvd.

Fort Wayne, IN 46808

(800) 649-11573566 Citadel Cir.

Newburg, IN 47630

(812) 490-44002801 Beverly Dr.

Aurora, IL 60504

(630) 820-3030

1801 179th St. North

East Moline, IL 61244

(309) 751-9540Route 24 East

Eureka, IL 61530

(309) 467-37161005 Thorrez

Jackson, MI 49201

(800) 336-38891196 A. Franklin St.

Marne, MI 49435

(616) 677-5900

VERMEER MIDWEST INC.www.vermeermidwest.com

VERMEERMIDSOUTH INC.

www.vermeermidsouth.com1200 Vermeer Cove

Cordova, TN 38018

(901) 758-19285246 Greenway Dr.

Jackson, MS 39204

(601) 923-8888

VERMEERNORTH ATLANTICSALES & SERVICE

7 Maple Ave.

Mt. Holly, NJ 08060

(609) 267-6600(800) 624-0623

2888 E.

Harrisburg Pike

Middletown, PA 17057

(717) 930-8780(888) 572-4283

805 Grundy Ave.

Holbrook, NY 11741

(631) 580-4400(888) 402-7823129 Route 6,

Bldg. #2

Mahopac, NY 10541

(845) 628-9850(800) 448-9850

VERMEER NORTHEASTwww.vermeernortheast.com

1235 Rt. 9

Castleton, NY 12033

(518) 732-7201605 Lewiston Rd.

Topsham, ME 04086

(207) 373-0880

224 South St.

Hopkinton, MA 01748

(508) 497-0886770 Derby Ave.

Seymour, CT 06484

(203) 736-9542

VERMEERMID-ATLANTIC INC.

www.VermeerMidAtlantic.com10501 Vermeer Place

Ashland, VA 23005

(800) 552-2074229 Jedburg Rd.

Summerville, SC 29483

(800) 246-430713005 Balls Ford Rd.

Manassas, VA 20109

(877) 661-65662803 Grand View Dr.

Simpsonville, SC 29681

(800) 850-47108424 Norcross Rd.

Colfax, NC 27235

(888) 993-9344

3501 Jones

Sausage Rd.

Garner, NC 27529

(888) 883-76338830 Corridor Rd.

Annapolis Junction,

MD 20701

(800) 492-127410900 Carpet St.,

Charlotte, NC 28273

(800) 768-3444

VERMEER-WISCONSIN INC.www.vermeerwisconsin.com

5445 North 131st St.

Butler, WI 53007

(800) 964-64622304 Kelbe Drive

Little Chute, WI 54140

(800) 859-9220W3090 County B

West Salem, WI 54669

(800) 759-6897

VERMEER HEARTLAND VERMEER SALES & SERVICE INC.

OF OH & PA2389 Medina Rd.

Medina, OH 44256

(888) 213-3544131 Wisconsin Ave.

Cranberry Twp., PA 16066

(888) 213-8340 • (724) 935-9277110 Stanford Pkwy.

Findlay, OH 45840

(888) 213-8338 • (419) 424-0572

2574 US Hwy. 22 NW

Washington Court House,

OH 43160

(740) 335-8571(740) 335-1926

424 South Mulberry St.

Elizabethtown, KY 42701

(270) 737-1721270) 737-2868

5900 Mac Corkle Ave.

St. Albans, WV 25177

(304) 768-5965

900 Cpt Joe Fulghum

Murfreesboro, TN 37129

615-869-02502007 Middlebrook Pike

Knoxville, TN 37921

865-524-9174

Pag

e 31• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Ap

ril 2012

WINN, MI — Morbark,Inc., a leading manufac-turer of tree care,forestry, sawmill, andwood recycling equip-ment, is pleased to an-nounce it has signed acontract making Grind-ing & Drilling Equip-ment, Inc., its exclusivetree care products dealerfor southern Ontario.

Grinding & DrillingEquipment, a new com-pany selling environ-mental waste reductionand horizontal direction-al drilling equipment, isbased in Desboro, On-tario, and will handlesales of Morbark’s handfed brush chippers andstump grinders, as wellas parts and service for

Morbark customers inOntario south of the46th parallel. JamesUrquhart, Grinding &Drilling Equipment pres-ident, started the com-pany after working for 15years in the industry.

“We are pleased toadd Grinding & DrillingEquipment to our deal-er network,” said Casey

Gross, Morbark TreeCare Products salesmanager. “Mr.Urquhart’s industry ex-perience and productknowledge, as well asGrinding & Drilling’sfocus on tree care andenvironmental wastereduction products,will give our customershigh quality and per-

sonalized service.” “I am excited to part-

ner with Morbark,” saidUrquhart. “I feel that oursuccess depends on ourcustomers’ success, andMorbark’s equipment of-fers so much more thanthe competition to helpour customers succeed.”

Morbark, Inc., basedin Winn, MI, has beeninnovating and manu-facturing durable, highperformance equipmentfor the forestry, recy-cling, tree care, sawmilland biomass markets formore than 50 years.

Morbark equipmenthelps customers harvest,process and convertwood and other organicmaterials into valuable,useful and profitableproducts. The companyproduces a full line ofwhole tree and wastewood chippers, flails,brush chippers, horizon-tal and tub grinders,sawmill equipment, ma-terial handling systemsand more. Visitw w w . m o r b a r k . c o m .“Like” us on Facebook orsubscribe to ourYouTube channel.

tem components withoutcompromising the opera-tor’s view of the jobsite.

The CX470C excavatoralso includes a standardair suspension seat andan in-cab auxiliary hy-draulic setting systemwith a new option for 10memory recall, attach-ment flow settings tomake tool changes quickand easy for operators.

These improvementsin operator comfort fea-tures are complementedby the added safety of afull ROPS structurearound the cab.

Ease of maintenance“Extended service in-

tervals for the Case C Se-ries excavators help re-duce operating costs,”O’Brien said. They aredesigned with 500 hourengine oil change inter-vals, 5,000 hour hy-draulic oil change inter-vals and 1,000 hourgreasing intervals withEasy Maintenance Sys-tem bushings.

The cab includes newaccess points to easilyreach the air filter andfuse box.

“The design of theCX470C excavator effi-ciently accommodatesthe redesigned engine,cooling and exhaust sys-tems while offering ex-cellent serviceability andoperator visibility,”O’Brien said.

The machines featurewide-open panels foreasy access to servicepoints and ground levelaccess to grouped lubri-cation points.

Full range of attachments

Case offers a range ofattachments for the

CX470C and other C Se-ries excavators, includ-ing Case Smart DiggingSystems componentssuch as pin-on buckets,coupler buckets, theCase Multi-Fit Couplerand the SmartFit™bucket tooth system.

The new Case pin-onbuckets are available forthe CX470C in heavyduty, heavy duty highcapacity, severe dutyand rock digging type de-signs, allowing the ma-chine to be productive ina wide range of applica-tions. The Case Multi-FitCoupler offers completehydraulic latching, en-abling excavator opera-tors to quickly attachand detach buckets andother components with-out leaving the cab. De-signed for the Multi-FitCoupler, Case couplerbuckets feature integrat-ed bucket pins to pre-vent any loss of breakoutforce that might other-wise occur when using acoupler device.

The SmartFit is a ham-merless quick changesystem that providesstronger, self-sharpeningteeth and reusableadapters and lockingpins. The SmartFit line-up includes general pur-pose, rock chisel, heavypenetrator, tiger, twintiger and flare teeth.

For additional excava-tor product specifica-tions, customer testimo-nials, competitive com-parisons, finance offersand more, please visitwww.casece.com. For aCase excavator demon-stration, see your localCase dealer.

160 Warren Avenue

WESTBROOK, ME 04092

207-854-8411

BANGOR, ME

207-942-4838

CARIBOU, ME

207-498-2547

CONCORD, NH

603-224-4063

CHELMSFORD, MA

978-256-9571

4 Executive Plaza

YONKERS, NY 10701

914-738-5100

Fax 914-738-6847

www.ehrbar.com

601 Coates Avenue

HOLBROOK, NY 11741

631-563-7600

Fax 631-218-1069

www.ehrbar.com

40 Kenosia Avenue

DANBURY, CT 06801

203-743-0088

Fax 203-743-0266

www.ehrbar.com

EDWARD EHRBAR, INC.

PENN JERSEY MACHINERY LLC120 Gordon Drive

LIONVILLE, PA 19341

610-363-9200

Fax: 610-594-0829

61 County Line Rd.

SOMERVILLE, NJ 08876

908-218-1919

Fax: 908-218-1959

1330 Hurffville Rd.

DEPTFORD, NJ 08096

856-227-6400

Fax: 856-227-0046

4805 ScoobyLane Carroll, OH 43112(P) 740-654-5304

Toll Free 866-262-4181

Cleveland, OH Branch525 Golden Oak Pkwy

Oakwood Village, OH 44146(P) 440-439-4567

Piketon, OH Branch3668 US Route 23 South

Piketon, OH 45661(P) 740-289-3294

Washington, PA Branch400 West Beau St

Washington, PA 15301(P) 724-222-2447

Indianapolis, IN Branch7019 Brookville Rd

Indianapolis, IN 46239(P) 317-375-7790

Cookeville,TN Branch1220 Southside Dr

Cookeville, TN 38506(P) 931-526-6222

Rineyville, KY Branch6300 Rineyville Rd

Rineyville, KY 40162(P)270-360-1010

Aiken, SC Branch1252 Old Kimbill Trail

Aiken, SC 29805(P) 803-642-0060

Jacksonville, FL Branch4710 Dignan Street

Jacksonville, FL 32254(P) 904-268-6554

Plant City, FL Branch2812 Airport Rd

Plant City, FL 33563(P) 813-754-5800

Pasco, WA Branch2300 N Commercial Ave

Pasco, WA 99301(P) 509-728-6614

NJ Branch(P) 740-422-6045(P) 609-313-0720

COMPANY WRENCH

Case from 29

Grinding & Drilling Equipment, Inc. joins Morbark network

Ap

ril 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

32

)

Are You Involved In More Than One Industry?We Are Here to Help You.

FFREEE SUBSCRIPTIONSS BYY REQUEST *

Name _______________________________________________

Farm/Business Name ___________________________________

Address______________________________________________

______________________________________________

City________________________ State _____ Zip __________

County ____________________Email _____________________

Phone ( ) _______________Fax ( ) _________________

Date___________Signature______________________________

LEE PUBLICATIONS, INC.PO Box 121, 6113 State Hwy., Palatine Bridge, NY 13428

800-218-5586 • FAX 518-673-2381SUBSCRIPTIONS

888-596-5329email: subscriptions@leepub.com

National Aggregate (bi-monthly)

Regional Heavy Construction (monthly)

TITLE

1 � President/CEO 2 � Manager/Supervisor 3 � OtherNUMBER YOUR PRIMARY BUSINESS #1, SECONDARY #2, ETC.

1 Asphalt Paving_____________________ 7 Construction Demolition _________________2 Concrete Paving ___________________ 8 Landscaping __________________________3 Oil & Stone Paving__________________ 9 Land Clearing _________________________4 Bridge Construction ________________ 10 Logging _____________________________5 Excavating ________________________ 11 Other _______________________________6 Utility/Underground _________________

Hard Hat News focuses on heavy equipment construction including excavating, construction/dem-

olition, paving, bridge building, and utility construc-tion in the northeastern third of the United States.

� YES - Send me Hard Hat News!

1 � Crushed stone and sand & gravel2 � Crushed stone3 � Sand and gravel4 � Recycled materials, concrete/asphalt5 � Lime

6 � Industrial minerals7 � Machinery/equipment manufacturer8 � Equipment dealer/distributor9 � Drilling

10 � Blasting

North American Quarry News covers quarries, sand and gravel pits, HMA and ready mix concrete operations in the United States. NAQN provides a

combination of strong editorial and advertising for industry professionals.

� YES - Send me North American Quarry News!

Your company produces these products or services:(Check All That Apply)

Regional Agriculture

� Dairy � Beef � Poultry � Horse � Goat� Sheep � Alfalfa � Corn � Soybeans

� YES - Send me Country Folks!

Business Type: (Check All That Apply)

Our premier weekly agricultural newspaper has four editions covering agriculture from Maine

through North Carolina. Every issue is loaded with national,

regional and local agricultural news,

equipment, service advertising and auctions.

*This publication costs $47 for one year. *This publication costs $78 for two years.

Regional/National Solid Waste Recycling(monthly)

TITLE

� Owner/President/VP � Operations Manager � Other

TYPE OF BUSINESS (Check all that apply)

Recycling professionals involved in the wood waste,C&D, scrap metal, asphalt & concrete, and

compost recycling industries will find Waste Handling Equipment News a valuable source of

new products, product innovation and site adaption.

� YES - Send me Waste Handling Equipment News!

� Construction Demolition Recycling� Construction Demolition Landfill� Woodwaste Recycling/Land Clearing� Composting

� Asphalt/Concrete Recycling� Scrap Metals Recycling

� Ferrous � Non-Ferrous

Paid Subscriptionweekly( )

Regional Horticulture

� YES - Send me Country Folks GROWER!

� Greenhouse � Tree Fruit � Nursery

� Farmers Market� Direct Market� Vegetable

� Small Fruit � Christmas � Garden Center� Supplier

Business Type: (Check All That Apply)

Country Folks Grower is the regional newspaper for all segments of commercial horticulture.

Each issue is filled with important information for the Greenhouse, Nursery,

Garden center, Landscaper, Fruit, Vegetable Grower and Marketers.

*This publication costs $24 for one year.*This publication costs $40 for two years.

Paid Subscriptionmonthly

National Vineyard Paid Subscriptionbi-monthly( )

Wine & Grape Grower offers features, news and informationon growing grapes, and making and selling wines.

Learn tips on how to start or improve your business.

� Grape Grower � Wines� Vineyard � Supplier

Business Type: (Check All That Apply)

Northeast Equine Market (monthly)Mane Stream is a monthly horse publication reaching Maine

to Northern Pennsylvania, and New Jersey.Not only does Mane Stream go to horse owners who request

it, but it goes to all of our Affiliated Horse AssociationMembers.....29 Associations Strong and Growing! In addition,issues of Mane Stream are shipped to tack shops, feed stores,

stables, auction barns, and where horse people frequent.

How Many Horses Do You Have?_____

Pag

e 33• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Ap

ril 2012To Place A Classified Ad Phone 1 (800) 836-2888 • Fax (518) 673-2381 • E-mail: classified@leepub.com

WASTE HANDLING EQUIPMENT NEWS CLASSIFIED SECTIONWaste Mailing Address - Waste Handling Equipment News Classifieds,

PO Box 121, Palatine Bridge, NY 13428Number / Classification

20 Air Compressors25 Air Tools55 Appraisal Services60 Asphalt Equipment65 Asphalt Recycling70 Attachments80 Auctions85 Backhoe/Loaders

150 Buckets165 Business Opportunities200 Chippers220 Compaction Equipment225 Composting Equipment245 Concrete Products250 Concrete Recycling255 Construction Demolition265 Construction Eq. For Rent270 Construction Eq. For Sale275 Construction Machinery

Wanted300 Conveyors310 Cranes320 Crushing Equipment365 Demolition375 Dozers400 Drills415 Employment Wanted425 Engines430 Excavators470 Financial Services495 For Rent or Lease505 Forklifts535 Generators550 Gradalls555 Graders610 Help Wanted635 Hoists705 Legal Notices745 Loaders760 Lumber & Wood Products780 Maintenance & Repair805 Miscellaneous880 Parts890 Pavers912 Point Of Sale925 Pressure Washers940 Quarry Equipment950 Real Estate For Sale955 Real Estate Wanted975 Rentals

1017 Scrapers1020 Screening Equipment1040 Services Offered1065 Skid Steer Loaders1085 Snowplows1105 Sweepers1120 Tools1130 Tractors1140 Trailers1145 Training1170 Truck Parts & Equipment1180 Trucks1185 Used Equipment1205 Wanted1230 Wood Waste Grinders1235 Wood Waste Recycling

Announcements Announcements

ADVERTISING DEADLINEMAY ISSUE

Friday, April 6thIf you would like to place a classified ad

please call Peg at 1-800-836-2888or email classified@leepub.com

Lumber &Wood Products

Lumber &Wood Products

WANTEDANTIQUE TIMBERS

& BOARDSYellow Pine, Cypress,

Fir, Oak.(512) 328-8837

WHAT ITS WORTH, INC.AUSTIN, TX

Recycling Equipment Recycling Equipment

813-421-2757grinderguy@askthegrinderguy.comSee More Grinders and Screeners @

www.askthegrinderguy.com

FOR SALE

1997 Frontier WindrowTurner Model F-118C,

18 ft., Excellent, 3500 Hrs.,3406 Cat, 460 HP

$119,995

Morbark 1300Tub Grinder 1999, 2002,

2005 Models, Gone Through,Work Ready

$149,995 and up

Screening Equipment Screening Equipment

Keith Kimmerle PA, 570-971-4520 Other Pre-Owned & New Crushers & Screens Available

6x20 2 Deck, On Tracks, Punch Plate or Standard Mesh,

Able to handle 28 Inch Material, Quarry, Coal, Topsoil,

Sand & Gravel, Recycling, Etc.

A True High Production Machine! (CPT= Cost Per Ton)

Rental, Sales, Service, Parts

Powerscreen 2400 Scalping and Finishing Screen

Trucks Trucks

Martin’s Farm Trucks, LLCTrucks for All Your Needs - Specializing in Agri-Business Vehicles

888-497-0310

1988 Mack R690T SA Roll Off Truck, E6-250hp, 5spd,

Extendable Tail on Rolloff 22’ cans,

Very nice condition

$14,900

2000 Sterling 8500 Tri-Axle Garbage

Truck, 3126 Cat, HD3560P Allison,

Hend Spring, Quad Lock, Double

Frame, 16/40 Axles, 25 Yard Heil

Packer, 253k mi $22,500

Call us today for your Subscription toWASTE HANDLING EQUIPMENT NEWS

Your Competitive Advantagein the Recycling Industry!888888--559966--55332299

1-800-836-2888To place aClassified

Ad

Announcements

� � � � �

ADVERTISERSGet the best response fromyour advertisements byincluding the condition, age,price and best calling hours.Also we always recommendinsertion for at least 2 timesfor maximum benefits. CallPeg at 1-800-836-2888

CHECK YOUR AD - ADVER-TISERS should check theirads. Lee Publications, Inc.shall not be liable for typo-graphical, or errors in publica-tion except to the extent of thecost of the first months inser-tion of the ad, and shall alsonot be liable for damages dueto failure to publish an ad.Adjustment for errors is limit-ed to the cost of that portion ofthe ad wherein the erroroccurred. Report anyerrors to 800-836-2888 or518-673-0111

NEED BUSINESS CARDS?Full color glossy, heavy stock.250 ($45.00); 500 ($60.00);1,000 ($75.00). Call yoursales representative or LeePublications 800-218-5586and ask for Beth or 518-673-0101 bsnyder@leepub.com

Construction Supplies

NEW GALVANIZEDGUARD RAIL AVAILABLE

16'x12.5", 91 Lbs. Ea.Over 400 Pieces In Stock

Discount for

Total Purchase

ABC/SVINGABROS. CORP.

OCALA, FL 34470

352-351-2841sales@svingaocala.com

For Rent or Lease

GREEN PROCESSING CEN-TER for Lease, City ofRome,NY. 7 miles off Thruway.315-336-3666, 315-338-3472

Parts

NEW & REBUILT Crusher &Screening Parts; Dodge &Falk shaft mounted & basemounted speed reducers.Call for complete listing,845-691-3666

Parts

TROMMEL BRUSHES

Mfg. By

DUFF BRUSH LLCPowerscreen, Wildcat,

McCloskey, Retech& Others

1-877-863-3319duffbrush@gmail.com

Wood Waste Grinders

2002 DURATECH HD9 tub-grinder, 2400 hrs., 9’ tub, 4sizes of screens, 275hp JDmotor, great for grindingmulch & green waste,$50,000. 413-834-4689

Ap

ril 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

34 To Place A Classified Ad Phone 1 (800) 836-2888 • Fax (518) 673-2381 • E-mail: classified@leepub.comWASTE HANDLING EQUIPMENT NEWS CLASSIFIED SECTION

Waste Mailing Address - Waste Handling Equipment News Classifieds,PO Box 121, Palatine Bridge, NY 13428

Wood Waste Grinders Wood Waste Grinders

600HP - John Deere Engine

UR 82 Grinder - Rental Unit Price: $290,000

650HP - Volvo Engine UR 92 Grinder

- Demo UnitPrice: $430,000

E-mail: theco@theco-inc.comPhone: 1-800-776-0335

UNIVERSAL REFINER VERTICAL SHAFT GRINDERS

APR 15Institute of Scrap RecyclingIndustries (DC) - ISRI - ISRI

Convention & Expo 2012Mandalay Bay Resort &Casino, Las Vegas, NV.Annual convention & scraprecycling industry exposi-tion.

APR 15-192012 ISRI AnnualConvention and

ExpositionMandalay Bay Resort &Casino, Las Vegas, NV.

APR 26-27 & MAY 2-3Terex Bid-Well Spring

Paving Service SchoolsSioux Falls and Canton, SD.Created specifically for paverowners, operators, servicetechnicians and inspectors,the service school strikes theright balance between class-room instruction and hands-on field demonstrations. Theclasses offer in-depth dis-cussion for paver and work-bridge setup, operation andservice, and are taught byseasoned service and fieldinstructors. For class regis-tration or for more details,visit www.bid-well.com. Reg-istration deadline is oneweek prior to the sessiondate. There is no limit to thenumber of attendees a com-pany can send, but class-room size is capped at 50.Tuition for the two day classis $200 and includes mealsand transportation to andfrom the airport, hotel andTerex Bid-Well facility. Con-tact Aron Sweeney , 800-843-0824 or e-mail aron.sweeney@terex.com.

APR 30 - MAY 2Texas Hydraulics to

Feature Refuse DesignCylinders & IntegratedHydraulic Cylinders at

WasteExpo 2012WasteExpo 2012, Las Vegas,NV. Booth No. 6014. OnInternet at www.texashydraulics.com

MAY 8-10ISRI Safety and

Environmental CouncilMeeting

Drury Plaza Hotel, St. Louis.Contact Anne Marie Hor-vath, 202-662-8511 or e-mail annemariehorvath@isri.org.

JUL 10-13ISRI Board of Directorsand Committee Meeting

Hyatt Regency on CapitalHill, Washington, DC.

JUL 25-2722nd Annual PROP

ConferenceLancastser Convention Cen-ter & Marriott, Lancas-ter,PA. Register now & save withsuper Early Bird rates.Attendees: $350 member,$710 non-member. Exhibi-tors: $595 PROP member,$710 non-member. SuperEarly Bird rates expire Nov.15. Online registration avail-able soon. On Internet atwww.proprecycles.org

OCT 23-25ISRI Board of Directorsand Committee Meeting

The Ritz Carlton, Cleveland,OH.

NOV 13-15ISRI Safety and

Environmental CouncilMeeting

Drury Plaza San AntonioRiverwalk. Contact AnneMarie Horvath, 202-662-8511 or e-mail annemariehorvath@isri.org.

WASTE HANDLING EQUIPMENT NEWSE-mail announcement of your upcomingevent(s) to: jcasey@leepub.com We mustreceive your information, plus a contactphone number, prior to the deadlinethat's noted under the Announcementsheading on the 1st page of these WHENClassifieds.

* * *

Calendar of Events

5 EASY WAYS TO PLACE AWASTE HANDLING EQUIPMENT NEWS

CLASSIFIED ADMAIL IT IN -

Fill out the attached form, cal-culate the cost, enclose yourcheck/money order or creditcard information and mail to:

WHEN Classifieds,PO Box 121,

Palatine Bridge, NY 13428

3.

FAX IT IN -

For MasterCard, Visa,American Express orDiscover customers, fillout the form below com-pletely and fax to Peggyat (518) 673-2381

2.

1. PHONE IT IN -

Just give Peggy a call at1-800-836-2888

DISPLAY ADS IN THE CLASSIFIEDS ARE $21.00 per column inch,$12.00 second zone. Maximum height 11 inches. No frequency oragency discounts. LINE ADS are one issue, $15.00 for 14 words,50¢ each additional word. All rates are per insertion. Payment mustbe included with your order.

4. E-MAIL IT IN - E-mail yourad to classified@leepub.com

5. ON-LINE - Go towww.wastehandling.com

and follow the PPllaaccee aa

CCllaassssiiffiieedd AAdd button toplace your ad 24/7!

Name: (Print)_______________________________

Company Name:____________________________

Address:___________________________________

City:__________________St.:_____Zip:_________

Phone:_____________________________________

Cell:_______________________________________

Fax:_______________________________________

E-mail:_____________________________________

Payment Method: � AmericanExpress � Discover � Visa � MasterCard

Acct#_______________________Exp. Date______

Signature_____________________Date_________

FOR BEST RESULTS, RUN YOUR AD FOR TWO ISSUES!

MM/YY

Required w/Credit Card Payment Only

$15.50

$17.00

$18.50

$20.00

$16.50

$18.00

$19.50

$16.00

$17.50

$19.00

Pag

e 35• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Ap

ril 2012

Ap

ril 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

36