VWR® FOR CHROMATOGRAPHY COLUMNS, CONSUMABLES …...VWR® FOR CHROMATOGRAPHY COLUMNS, CONSUMABLES...

VWR® FOR CHROMATOGRAPHY COLUMNS, CONSUMABLES AND REAGENTS

Chrom essentials

Analytical liquid chromatography

Preparative and flash HPLC

Gas chromatography

Thin layer chromatography

Bio chromatography

Separating performance from price

2 VWR | VWR® FOR CHROMATOGRAPHY COLUMNS, CONSUMABLES AND REAGENTS

VWR® FOR CHROMATOGRAPHY COLUMNS, CONSUMABLES AND REAGENTS

CHROMATOGRAPHY

Great products for all chromatographers

Choice – explore our growing range of chromatography products

Performance – market leading consistency and reliability

Value for money – products that don’t cost a fortune to buy

CONTENTS

Chrom essentials

Vials and caps 3

Filtration 24

Syringes 25

Puranity 27

Safety, solvent supply and waste management systems 29


HPLC solvents 30

LCMS solvents 31

Mobile phase additives 33

Standards 34

Columns 36


Solvents and reagents 47

Bürkle pumps 48

Bulk sorbents 49

Gas chromatography

Solvents, reagents and standards 50


Solvents 52

Bio chromatography

Buffers 53

RS232 interface

Autoclavable

! Accessories required to use the product

Warranty

SYMBOLS

3VWR® FOR CHROMATOGRAPHY COLUMNS, CONSUMABLES AND REAGENTS | VWR

Type Capacity (ml) Ø×H (mm) Pk Cat. No.Crimp neck vials, ND8Clear glass, conical 0,2 5,5×31,5 1.000 548-0078Clear glass, conical 0,6 7×40 1.000 548-0340Clear glass, flat bottom 0,7 7×40 1.000 548-0036Clear glass, flat bottom 1,2 8,2×40 1.000 548-0341Clear glass, round bottom 0,3 5,5×31,5 1.000 548-0080Amber glass, conical 0,6 7×40 1.000 548-0339

Type Hardness Septum Thickness (mm) Pk Cat. No.Aluminium crimp caps, ND8 with central hole, 4 mm and septum

Clear lacquered aluminium 60° shore ANatural rubber red-orange/TEF transparent

1,0 1.000 548-0041

Clear lacquered aluminium 60° shore ANatural rubber red-orange/TFE transparent

1,0 1.000 548-3290

Clear lacquered aluminium 45° shore A PTFE red/silicone white/PTFE red 1,0 1.000 548-0038Clear lacquered aluminium 45° shore A Red rubber/PTFE beige 1,0 1.000 548-3291Clear lacquered aluminium 55° shore A Silicone beige/PTFE red 1,5 1.000 548-0324Clear lacquered aluminium 45° shore A Silicone white/PTFE red 1,3 1.000 548-0040Clear lacquered aluminium 45° shore A Silicone white/PTFE red, with slit 1,3 1.000 548-0813Clear lacquered aluminium 53° shore D Virgin PTFE 0,25 1.000 548-0325

Crimp neck vials, ND8These vials are preferentially used on instruments of the following manufacturers: Agilent, Beckman, Carlo Erba, CTC, Fisons, PerkinElmer, Shimadzu, Thermo Scientific, VWR/Hitachi, etc.

Broad selection of crimp neck vials ND8 available: crimp neck vials and micro vials ND8 can be closed with 8 mm aluminium caps, 9 mm PE caps or with 8 mm push-on caps. However, micro vials often need an adapter to run in the autosampler. They often have a conical bottom shape, so that they cannot stand by themselves, but need an adapter.

• With flat, round or conical bottom• In clear or amber glass• For almost all autosamplers

Type Capacity (ml) Ø×H (mm) Septum Pk Cat. No.Screw neck vials, ND8Clear glass 1,5 11,6×32 1.000 548-0018Clear glass, conical 1,1 11,6×32 1.000 548-0419Clear glass with label and filling lines 1,5 11,6×32 1.000 548-0420Amber glass 1,5 11,6×32 1.000 548-0448Amber glass with label and filling lines 1,5 11,6×32 1.000 548-0019KitsClear glass, septum: Natural rubber red-orange/TEF transparent, 60° shore A, 1,3 mm

1,5 11,6×32 1.000 548-0915

Clear glass, septum: PTFE red/silicone white/PTFE red, 45° shore A, 1,0 mm

1,5 11,6×32 1.000 548-0176

Clear glass, septum: Silicone white/PTFE blue, 55° shore A, 0,9 mm, slitted

1,5 11,6×32 1.000 548-0095

Clear glass, septum: Silicone white/PTFE red, 45° shore A, 1,3 mm

1,5 11,6×32 1.000 548-0175

Screw neck vials, ND8These vials are preferentially used on instruments of the following manufactures: Beckman, CTC, Gilson, Knauer, Shimadzu, Spark, Varian, VWR/Hitachi, etc.

• Standard vials for GC and HPLC• Specially suitable for VWR/Hitachi instruments• Broad range of micro-inserts• Vials and seals also available as 2 in1 kit• Small opening requires micro-inserts with a diameter of 5 mm• Micro-insert with flat bottom also available

Delivery information: Kits include: 1,5 ml glass screw cap vial (11,6×32 mm), screw cap PP black with 5,5 mm central hole and septum.


Chrom essentials

Type Capacity (ml) Ø×H (mm) Septum Pk Cat. No.KitsClear glass, septum: Silicone white/PTFE red, slitted, 45° shore A, 1,3 mm

1,5 11,6×32 1.000 548-1878

Clear glass, septum: Virgin PTFE, 53° shore D, 0,25 mm 1,5 11,6×32 1.000 548-0913Clear glass with label and filling lines, septum: Silicone white/PTFE red, 45° shore A, 1,3 mm

1,5 11,6×32 1.000 548-2124

Amber glass, septum: Natural rubber red-orange/TEF transparent, 60° shore A, 1,3 mm

1,5 11,6×32 1.000 548-1517

Amber glass, septum: Silicone white/PTFE blue, 55° shore A, 0,9 mm, slitted

1,5 11,6×32 100 548-0853

Amber glass, septum: Silicone white/PTFE red, 45° shore A, 1,3 mm

1,5 11,6×32 1.000 548-0914

Amber glass with label and filling lines, septum: Silicone white/PTFE red, 45° shore A, 1,3 mm

1,5 11,6×32 1.000 548-2090

Screw neck vials, ND8 with pre-assembled seals

Clear glass, pre-assembled with black cap 1,5 11,6×32Natural rubber red-orange/TEF transparent, 60° shore A, 1,3 mm

1.000 548-3348

Clear glass, pre-assembled with black cap 1,5 11,6×32Silicone white/PTFE blue, 55° shore A, 0,9 mm, slitted

1.000 548-0819

Clear glass, pre-assembled with black cap 1,5 11,6×32Silicone white/PTFE red, 45° shore A, 1,3 mm

1.000 548-1420

Clear glass, pre-assembled with black cap 1,5 11,6×32Silicone white/PTFE red, 45° shore A, 1,3 mm, slitted

1.000 548-0850

Type Capacity (ml) Ø×H (mm) Hardness Septum Thickness (mm) Pk Cat. No.Micro-inserts, ND8 for small openingClear glass, conical, without metal spring

0,1 4×27,5 1.000 548-3365

Clear glass, conical, with separate metal spring

0,1 4×27,5 1.000 548-0021

Clear glass, conical, top 15 mm

0,1 5×31 1.000 548-0020

Clear glass, conical, with assembled plastic spring

0,1 5×29 1.000 548-0083

Clear glass, conical, top 9 mm

0,1 5×31 1.000 548-0308

Clear glass, flat bottom 0,2 5×31 1.000 548-0780Screw caps, ND8 PP with septaBlack, closed top 55° shore A Butyl red/PTFE grey 1,3 1.000 548-0836

Black, closed top 60° shore ANatural rubber red-orange/TEF transparent

1,3 1.000 548-0355

Black, closed top 45° shore ASilicone white/PTFE red

1,3 1.000 548-0360

Black, with central hole 5,5 mm 55° shore A Butyl red/PTFE grey 1,3 1.000 548-0106

Black, with central hole 5,5 mm 60° shore ANatural rubber red-orange/TEF transparent

1,3 1.000 548-0023

Black, with central hole 5,5 mm 45° shore APTFE red/silicone white/PTFE red

1,0 1.000 548-0022

Black, with central hole 5,5 mm 45° shore A Red rubber/PTFE beige 1,0 1.000 548-3322

Black, with central hole 5,5 mm 55° shore ASilicone beige/PTFE red

1,5 1.000 548-0354

Black, with central hole 5,5 mm 45° shore ASilicone blue transparent/PTFE white

1,3 1.000 548-0357

Black, with central hole 5,5 mm 45° shore ASilicone dark blue/PTFE white

1,3 1.000 548-0359

Black, with central hole 5,5 mm 45° shore ASilicone white/PTFE red

1,3 1.000 548-0024

Black, with central hole 5,5 mm 45° shore ASilicone white/PTFE red, slitted

1,3 1.000 548-0834

Septa, ND8Silicone dark blue/PTFE white 45° shore A 1,3 1.000 548-0322Silicone white/PTFE blue, slitted 55° shore A 0,9 1.000 548-0026Silicone white/PTFE red 45° shore A 1,3 1.000 548-0314Silicone white/PTFE red, slitted 45° shore A 1,3 1.000 548-1455Virgin PTFE 53° shore D 0,25 1.000 548-0027Screw caps PP, ND8 without septumBlack, central hole 5,5 mm 1.000 548-0025Black, closed 1.000 548-0335


Type Capacity (ml) Ø×H (mm) Septum Pk Cat. No.Short thread vials, ND9Clear glass with label and filling lines, integrated 0,2 ml micro-insert 0,2 11,6×32 1.000 548-0425Clear Topsert TPX with integrated glass micro-insert 0,2 ml 0,2 11,6×32 1.000 548-0428Clear TopSert TPX with integrated glass micro-insert 0,2 ml, silanised 0,2 11,6×32 1.000 548-0430Clear glass with integrated micro-insert, „base bonded“ 0,3 11,6×32 1.000 548-1442Clear glass, inner cone in the solid glass bottom 1,1 11,6×32 1.000 548-0081Clear glass 1,5 11,6×32 1.000 548-0028Clear glass with label and filling lines 1,5 11,6×32 1.000 548-0029Clear glass, silanised 1,5 11,6×32 1.000 548-0426Amber Topsert TPX with integrated glass micro-insert 0,2 11,6×32 1.000 548-0791Amber TopSert, TPX with integrated 0,2 ml glass micro-insert, silanised 0,2 11,6×32 1.000 548-0849Amber glass with label and filling lines, integrated 0,2 ml micro-insert 0,2 11,6×32 1.000 548-3308Amber glass with label and filling lines 1,5 11,6×32 1.000 548-0030Amber glass with label and filling lines, silanised 1,5 11,6×32 1.000 548-0427Short thread vials in plastic, ND9PP transparent, conical insert 0,3 11,6×32 1.000 548-0440PP amber, conical insert 0,3 11,6×32 1.000 548-0453TPX cystal clear, conical insert 0,3 11,6×32 1.000 548-0450PP transparent, cylindrical insert 0,7 11,6×32 1.000 548-0894PP transparent with filling lines 1,5 11,6×32 1.000 548-0452PP amber with filling lines 1,5 11,6×32 1.000 548-0455KitsClear glass, 1,1 ml, cone in the solid glass bottom, blue cap, septum silicone beige/PTFE white, 45° shore A, 1,3 mm, slitted

1,1 11,6×32 1.000 548-1083

Clear glass, 1,1 ml, cone in the solid glass bottom, blue cap, septum silicone white/PTFE blue, 55° shore A, 1,0 mm, with slit

1,1 11,6×32 1.000 548-2095

Clear glass, 1,1 ml, cone in the solid glass bottom, blue cap, septum silicone white/PTFE red, 55° shore A, 1,0 mm

1,1 11,6×32 1.000 548-1457

Clear glass, 1,5 ml, blue cap, septum natural rubber red-orange/TEF transparent, 60° shore A, 1,0 mm 1,5 11,6×32 1.000 548-0907Clear glass, 1,5 ml, blue cap, septum PTFE red/silicone white/PTFE red, 45° shore A, 1,0 mm 1,5 11,6×32 1.000 548-0909Clear glass, 1,5 ml, blue cap, septum red rubber/PTFE beige, 45° shore A, 1,0 mm 1,5 11,6×32 1.000 548-1421Clear glass, 1,5 ml, blue cap, septum silicone beige/PTFE white, 45° shore A, 1,3 mm 1,5 11,6×32 1.000 548-3352Clear glass, 1,5 ml, blue cap, septum silicone white/PTFE blue, 55° shore A, 1,0 mm, slitted 1,5 11,6×32 1.000 548-0908Clear glass, 1,5 ml, blue cap, septum silicone white/PTFE red, 55° shore A, 1,0 mm 1,5 11,6×32 1.000 548-0177Clear glass, 1,5 ml, blue cap, septum virgin PTFE, 53° shore D, 0,2 mm 1,5 11,6×32 1.000 548-1396Clear glass, 1,5 ml, blue cap UltraBond, septum silicone beige/PTFE white, 45° shore A, 1,3 mm, slitted

1,5 11,6×32 1.000 548-2125

Clear glass, 1,5 ml, red cap, septum silicone white/PTFE red, 55° shore A, 1,0 mm 1,5 11,6×32 1.000 548-3255Clear glass, 1,5 ml, silanised, blue cap, septum silicone beige/PTFE white, 45° shore A, 1,3 mm, slitted

1,5 11,6×32 1.000 548-1363

Clear glass, 1,5 ml, transparent cap, septum natural rubber red-orange/TEF transparent, 60° shore A, 1,0 mm

1,5 11,6×32 1.000 548-0854

Clear glass, 1,5 ml, transparent cap, septum silicone white/PTFE red, 55° shore A, 1,0 mm 1,5 11,6×32 1.000 548-0911Clear glass, 1,5 ml, with label and filling lines, blue cap, septum PTFE red/silicone white/PTFE red, 45° shore A, 1,0 mm

1,5 11,6×32 1.000 548-3275

Short thread vials, ND9Standard glass or plastic vials for GC and HPLC, micro-inserts, closures and kits. Can be used universally on almost all autosamplers, preferred type of vial for Waters and Agilent.

• Wide opening enables easy filling• Closures with different types of septa can be supplied in differently

coloured caps; blue cap also available with closed top• Pre-cut closures for HPLC needles are available, where only the silicone

is slitted, but the PTFE remains intact (no concentration changes; no contamination due to impurities extracted from the silicone)• Synthetic material often used in Agilent red rubber/PTFE septa has been added to the product line (this is a softer material with

less fragmentation than natural rubber/TEF)

Kits include: 1,5 ml short thread vial (11,6×32 mm), short thread cap PP blue, red or transparent with 6 mm central hole and septum.

Special short thread cap for LC/MS and GC/MS applications

• One component closure• No bleeding, absolutely inert• Tight, pierceable and chemical resistant like PTFE


Chrom essentials

Type Capacity (ml) Ø×H (mm) Septum Pk Cat. No.KitsClear glass, 1,5 ml, with label and filling lines, blue cap, septum red rubber/PTFE beige, 45° shore A, 1,0 mm

1,5 11,6×32 1.000 548-1419

Clear glass, 1,5 ml, with label and filling lines, blue cap, septum silicone beige/PTFE white, 45° shore A, 1,3 mm

1,5 11,6×32 1.000 548-1092

Clear glass, 1,5 ml, with label and filling lines, blue cap, septum silicone white/PTFE blue, 55° shore A, 1,0 mm, slitted

1,5 11,6×32 1.000 548-0910

Clear glass, 1,5 ml, with label and filling lines, blue cap, septum silicone white/PTFE red, 55° shore A, 1,0 mm

1,5 11,6×32 1.000 548-3343

Clear glass, 1,5 ml, with label and filling lines, blue cap UltraBond, septum silicone beige/PTFE white, 45° shore A, 1,3 mm, slitted

1,5 11,6×32 1.000 548-3276

Clear glass, 1,5 ml, with label and filling lines, transparent cap, septum silicone white/PTFE red, 55° shore A, 1,0 mm

1,5 11,6×32 1.000 548-3213

Amber glass, 1,5 ml, with label and filling lines, blue cap, septum red rubber/PTFE beige, 45° shore A, 1,0 mm

1,5 11,6×32 1.000 548-1422

Amber glass, 1,5 ml, with label and filling lines, blue cap, septum silicone white/PTFE blue, 55° shore A, 1,0 mm, slitted

1,5 11,6×32 1.000 548-3259

Amber glass, 1,5 ml, with label and filling lines, blue cap, septum silicone white/PTFE red, 55° shore A, 1,0 mm

1,5 11,6×32 1.000 548-3253

Amber glass, 1,5 ml, with label and filling lines, blue cap UltraBond, septum silicone beige/PTFE white, 45° shore A, 1,3 mm, slitted

1,5 11,6×32 1.000 548-3047

Amber glass, 1,5 ml, with label and filling lines, transparent cap, septum silicone white/PTFE red, 55° shore A, 1,0 mm

1,5 11,6×32 1.000 548-0912

Amber glass, 1,5 ml, with label and filling lines, transparent cap, virgin PTFE, 53° shore D, 0,2 mm

1,5 11,6×32 1.000 548-3342

PP transparent, 0,3 ml, blue cap, septum PTFE red/silicone white/PTFE red, 60° shore A, 1,0 mm

0,3 11,6×32 1.000 548-2098

PP transparent 0,3 ml, blue cap, septum silicone white/PTFE blue slitted, 60° shore A, 1,0 mm

0,3 11,6×32 1.000 548-2094

PP transparent 0,3 ml, blue UltraBond seal, 6 mm centre hole, septum silicone beige/PTFE white, 45° shore A, 1,3 mm, with slit

0,3 11,6×32 1.000 548-1417

PP transparent 0,7 ml, blue cap UltraBond, septum silicone beige/PTFE white, 45° shore A, 1,3 mm, slitted

0,7 11,6×32 1.000 548-1398

PP transparent 1,5 ml, blue cap, septum silicone white/PTFE blue, 55° shore A, 1,0 mm, slitted

1,5 11,6×32 1.000 548-0855

PP transparent 1,5 ml, blue cap, septum silicone white/PTFE red, 55° shore A, 1,0 mm 1,5 11,6×32 1.000 548-2121Short thread vials, ND9 with pre-assembled seals

Clear glass, pre-assembled with blue cap 1,5 11,6×32Silicone white/PTFE blue, 55° shore A, 1,0 mm, slitted

1.000 548-3309

Amber glass, pre-assembled with blue cap 1,5 11,6×32Silicone white/PTFE blue, 55° shore A, 1,0 mm, slitted

1.000 548-1055

Amber glass, pre-assembled with Ultrabond blue cap 1,5 11,6×32Silicone beige/PTFE white, 45° shore A, 1,3 mm, slitted

1.000 548-3201

Clear glass, pre-assembled with blue cap 1,5 11,6×32Red rubber/PTFE beige, (Agilent quality), 45° shore A, 1,0 mm

1.000 548-1056

Type Capacity (ml) Ø×H (mm) Hardness Septum Thickness (mm) Pk Cat. No.Micro-inserts for wide openingMicro-insert, clear glass, flat bottom 0,2 6×31 1.000 548-0001Micro-insert, clear glass, with assembled plastic spring

0,1 5,7×29 1.000 548-0002

Micro-insert, clear glass, 15 mm top 0,1 6×31 1.000 548-0006Micro-insert, clear glass, 12 mm top 0,1 6×31 1.000 548-0310Micro-insert, clear glass, 15 mm top, silanised 0,1 6×31 1.000 548-0311Micro-insert, clear glass, with assembled plastic spring, silanised

0,1 6×29 1.000 548-0812

Clear, 10 mm top, with filling lines 0,1 6×29 1.000 548-1380Clear, 10 mm top, with filling lines and attached plastic spring

0,1 6×29 1.000 548-1381

Clear, flat bottom 0,2 6×31 1.000 548-1382Micro-insert, clear glass, flat bottom, silanised 0,2 6×31 1.000 548-3287Short screw caps with central hole, 6 mm and septa, ND9Magnetic, for CTC GC PAL and Thermo Scientific TriPlus™ 55° shore A Silicone white/PTFE red 1,0 1.000 548-3294

PP black 60° shore ANatural rubber red-orange/TEF transparent

1,0 1.000 548-0784

PP black 45° shore APTFE red/silicone white/PTFE red

1,0 1.000 548-0785

PP black 45° shore A Red rubber/PTFE beige 1,0 1.000 548-3298

PP black 55° shore ASilicone white/PTFE blue, slitted

1,0 1.000 548-0788

PP black 55° shore A Silicone white/PTFE red 1,0 1.000 548-0786


Type Capacity (ml) Ø×H (mm) Hardness Septum Thickness (mm) Pk Cat. No.Short screw caps with central hole, 6 mm and septa, ND9PP black 53° shore D Virgin PTFE 0,2 1.000 548-0787PP blue - Aluminium liner 0,06 1.000 548-1993

PP blue 60° shore ANatural rubber red-orange/TEF transparent

1,0 1.000 548-0086

PP blue 45° shore APTFE red/silicone white/PTFE red

1,0 1.000 548-0087

PP blue 45° shore APTFE white/Silicone beige, slitted

1,0 1.000 548-1533

PP blue 45° shore A Red rubber/PTFE beige 1,0 1.000 548-0896

PP blue 55° shore ASilicone white/PTFE blue, pre-cut (Y)

1,0 1.000 548-0815

PP blue 55° shore ASilicone white/PTFE blue, slitted

1,0 1.000 548-0088

PP blue 55° shore A Silicone white/PTFE red 1,0 1.000 548-0085

PP blue 55° shore ASilicone white/PTFE red, pre-cut (Y)

1,0 1.000 548-3300

PP blue 55° shore ASilicone white/PTFE red, UltraClean, slitted

1,0 1.000 548-1537

PP blue 53° shore D Virgin PTFE 0,2 1.000 548-0089

PP blue, closed top 60° shore ANatural rubber red-orange/TEF transparent

1,0 1.000 548-3185

PP blue, closed top 55° shore A Silicone white/PTFE red 1,0 1.000 548-0898PP blue, closed top 53° shore D Virgin PTFE 0,2 1.000 548-3184

PP green 60° shore ANatural rubber red-orange/TEF transparent

1,0 1.000 548-0383

PP green 45° shore APTFE red/silicone white/PTFE red

1,0 1.000 548-0840

PP green 45° shore A Red rubber/PTFE beige 1,0 1.000 548-3295PP green 55° shore A Silicone white/PTFE red 1,0 1.000 548-3179

PP green 55° shore ASilicone white/PTFE red, slitted

1,0 1.000 548-3183

PP green 53° shore D Virgin PTFE 1,0 1.000 548-0163

PP red 60° shore ANatural rubber red-orange/TEF transparent

1,0 1.000 548-0379

PP red 45° shore APTFE red/silicone white/PTFE red

1,0 1.000 548-0380

PP red 45° shore A Red rubber/PTFE beige 1,0 1.000 548-3297

PP red 55° shore ASilicone white/PTFE blue, slitted

1,0 1.000 548-0382

PP red 55° shore A Silicone white/PTFE red 1,0 1.000 548-0381PP red 53° shore D Virgin PTFE 0,2 1.000 548-0839

PP transparent 60° shore ANatural rubber red-orange/TEF transparent

1,0 1.000 548-0032

PP transparent 45° shore APTFE red/silicone white/PTFE red

1,0 1.000 548-0033

PP transparent 45° shore A Red rubber/PTFE beige 1,0 1.000 548-3296

PP transparent 55° shore ASilicone white/PTFE blue, slitted

1,0 1.000 548-0084

PP transparent 55° shore A Silicone white/PTFE red 1,0 1.000 548-0034

PP transparent 55° shore ASilicone white/PTFE red, pre-cut (Y)

1,0 1.000 548-3301

PP transparent 53° shore D Virgin PTFE 0,2 1.000 548-0377PP transparent 70° shore A Viton black 1,0 1.000 548-0378

PP yellow 60° shore ANatural rubber red-orange/TEF transparent

1,0 1.000 548-0164

PP yellow 45° shore APTFE red/silicone white/PTFE red

1,0 1.000 548-0841

Short screw caps with central hole, 6 mm and septa, ND9PP yellow 45° shore A Red rubber/PTFE beige 1,0 1.000 548-3299

PP yellow 55° shore ASilicone white/PTFE blue, slitted

1,0 1.000 548-3182

PP yellow 55° shore A Silicone white/PTFE red 1,0 1.000 548-0162UltraBond short thread seals, ND9 with central holePP black 45° shore A Silicone white/PTFE red 1,3 1.000 548-0371

PP blue (compatible with Waters) 45° shore ASilicone beige/PTFE white

1,3 1.000 548-0372

PP blue (compatible with Waters) 45° shore ASilicone beige/PTFE white, slitted

1,3 1.000 548-0373

Special short thread cap for LC/MS and GC/MS applicationsMS short thread cap, transparent, with thinned penetration area and diaphragm 1.000 548-0902


Chrom essentials

Type Capacity (ml) Pk Cat. No.HPLC/GC certified vial kit, clear glass, with label and filling lines, UltraClean seal: 9 mm PP short thread cap, blue, centre hole, septum silicone white/PTFE red, 55° shore A, 1,0 mm

1,5 1.000 548-1488

HPLC/GC certified vial kit, amber glass, with label and filling lines, UltraClean seal: 9 mm PP short thread cap, blue, centre hole, septum silicone white/PTFE red, 55° shore A, 1,0 mm

1,5 1.000 548-1489

HPLC and GC certified vial kitsThe use of HPLC and GC certified vial kits are an important way of reducing sources of error and ensuring that processes are reproducible.

• Each batch of HPLC and GC certified kits is tested on 15 critical parameters. In a realistic method, an HPLC/UV and GC/MS-test of vials/closure combination of blanks and contaminations will be carried out

• The batch specific test certificate with the HPLC and GC-chromatograms can be handed out upon request

Packaging: The HPLC and GC certified kits are supplied completely shrink-wrapped for reasons of assurance of origin, purity and transport safety.

548-1488

Type Capacity (ml) Ø×H (mm) Septum Pk Cat. No.LC/MS and GC/MS certified vial kit, clear glass, with wide opening, label, filling lines and overwind-barrier, Ultra High Performance seal: 9 mm PP short thread cap, blue, centre hole

1,5 11,6×32silicone dark blue-translucent/PTFE natural, 35° shore A, 1,0 mm

1.000 548-1990

LC/MS and GC/MS certified vial kit, amber glass, with wide opening, label, filling lines and overwind-barrier, Ultra High Performance seal: 9 mm PP short thread cap, blue, centre hole

1,5 11,6×32silicone dark blue-translucent/PTFE natural, 35° shore A, 1,0 mm

1.000 548-1991

LC/MS and GC/MS certified vial kitsEach lot of the vial/closure combination has been tested by LC/MS and GC/MS on traces of blank values and contaminations.

• Additionally the glass surface of these specific SureStop™ vials provides very low adsorption tendencies for all types of polar compounds

• Closures contain a very soft ultra low bleed (Ultra High Performance) silicone septum with PTFE layer, optimised for ultra trace analysis

• The batch-specific test certificate with the MS-chromatograms can be handed out on request

Packaging: The LC/MS and GC/MS certified kits are delivered completely shrink wrapped in order to assure origin, purity and transport safety.548-1990

Type Capacity (ml) Ø×H (mm) Pk Cat. No.Clear glass, wide opening, with overwind-barrier

1,5 11,6×32 1.000 548-1523

Clear glass, wide opening, label and filling lines, with overwind-barrier

1,5 11,6×32 1.000 548-1524

Amber glass, wide opening, label and filling lines, with overwind-barrier

1,5 11,6×32 1.000 548-1525

Short thread SureStop™ vials, ND9

548-1523

Type Capacity (ml) Ø×H (mm) Pk Cat. No.Short thread vials ND9, clear glass 0,9 11,6×32 100 548-1386Snap ring/crimp vials ND9, clear glass 0,9 11,6×32 100 548-1387

Total microlitre vials

548-1387

Total microlitre vials provide a precise tapered internal design for a maximum recovery without the need for a separate micro-insert. They ensure maximum recovery for GC and HPLC/UHPLC with a residual volume <1 µl.

• Usable as a concentration vial because the solid glass bottom offers excellent heat transfer and stability

• Autosampler compatibility because of the flat glass bottom and ”standard” vial design

• Flexible volume from 1,4 ml (max. possible volume) down to 25 µl (min. recommended working volume)

• Hydrolytic class 1 glass

SureStop™ vials are designed with an additional overwind-barrier and remove any subjectivity around achieving the optimal seal compression when closing a vial. As an integral component of technology SureStop™ vials offer the sealing and performance characteristics of a crimp top vial and the versatility and convenience of a threaded vial. This is achieved by incorporating a definite stop point into the design of the vial finish, preventing over tightening of the closure.


Type Capacity (ml) Ø×H (mm) Pk Cat. No.Screw neck vials, ND10Clear glass 1,5 11,6×32 1.000 548-0385Clear glass with label and filling lines 1,5 11,6×32 1.000 548-0386Amber glass with label and filling lines 1,5 11,6×32 1.000 548-0387

Screw neck vials, ND10These vials are preferentially used on instruments of the following manufacturers: Jasco, PerkinElmer, Shimadzu, Varian, Waters®, etc.

• Wide opening enables easy filling with viscous materials• Any combination of 1,5 ml screw neck vial 10-425 with one of the 10 mm PP screw

seals can be ordered as a 2 in1 kit• Closed top seals and replacement septa are available• Broad range of micro-inserts

Type Capacity (ml) Ø×H (mm) Hardness Septum Thickness (mm) Pk Cat. No.Micro-inserts for wide openingMicro-insert, clear glass, flat bottom 0,2 6×31 1.000 548-0001Micro-insert, clear glass, with assembled plastic spring 0,1 5,7×29 1.000 548-0002Micro-insert, clear glass, 15 mm top 0,1 6×31 1.000 548-0006Micro-insert, clear glass, 12 mm top 0,1 6×31 1.000 548-0310Micro-insert, clear glass, 15 mm top, silanised 0,1 6×31 1.000 548-0311Micro-insert, clear glass, with assembled plastic spring, silanised

0,1 6×29 1.000 548-0812

Micro-insert, clear glass, flat bottom, silanised 0,2 6×31 1.000 548-3287PP screw caps, ND10 with septumPP black, central hole 7 mm 60° shore A Natural rubber red-orange/TEF transparent 1,3 1.000 548-0389PP black, central hole 7 mm 45° shore A PTFE red/silicone white/PTFE red 1,0 1.000 548-0391PP black, central hole 7 mm 45° shore A Silicone white/PTFE beige 1,5 1.000 548-0388PP black, central hole 7 mm 55° shore A Silicone white/PTFE blue, slitted 1,5 1.000 548-0392PP black, central hole 7 mm 45° shore A Silicone white/PTFE red 1,3 1.000 548-0390PP black, closed top 60° shore A Natural rubber red-orange/TEF transparent 1,3 1.000 548-3256PP screw caps, ND10 without septumPP black, central hole 7 mm 1.000 548-0384

Type Capacity (ml) Ø×H (mm) Pk Cat. No.Crimp neck vials, ND11Clear glass, conical 0,9 10×32 1.000 548-0421Clear glass, conical 1,1 11,6×32 1.000 548-0418Clear glass, inner cone in solid glass bottom 1,1 11,6×32 1.000 548-0092Clear glass, small opening 1,5 11,6×32 1.000 548-0447Clear glass, wide opening 1,5 11,6×32 1.000 548-0003Clear glass, wide opening 2,5 11,6×41 1.000 548-0423Clear glass, wide opening, silanised 1,5 11,6×32 1.000 548-2088Clear glass with label and filling lines, wide opening 1,5 11,6×32 1.000 548-0004Clear glass with label and filling lines and integrated 0,2 ml micro-insert 0,2 11,6×32 1.000 548-0424Clear TopSert, TPX snap ring vial with integrated 0,2 ml glass micro-insert 0,2 11,6×32 1.000 548-0429Clear TopSert, TPX snap ring vial with integrated 0,2 ml glass micro-insert, silanised 0,2 11,6×32 1.000 548-0431Amber glass, wide opening 1,5 11,6×32 1.000 548-3337Amber glass with label and filling lines, wide opening 1,5 11,6×32 1.000 548-0005Amber glass with label and filling lines and integrated 0,2 ml micro-insert 0,2 11,6×32 1.000 548-3307Amber TopSert, TPX snap ring vial with integrated 0,2 ml glass micro-insert 0,2 11,6×32 1.000 548-0792Amber TopSert, TPX snap ring vial with integrated 0,2 ml glass micro-insert, silanised 0,2 11,6×32 1.000 548-3198

Crimp neck vials, ND11These vials are preferentially used on instruments of the following manufacturers: Agilent, Carlo Erba, CTC, DANI, Fisons, Gerstel, Jasco, PerkinElmer, Shimadzu, Spark, Thermo Scientific, Varian, etc.

• Standard vials for GC and HPLC• Vials with a barcode label as well as pre-crimped vials are also available• Microlitre vials for sample preparation (reactions, concentrations) or as

an alternative for conical micro vials or crimp neck vials with inserts

TopSert vials are an alternative to glass vials with fused-in micro-inserts or micro-insert with plastic spring. The glass micro-insert of these TopSert vials is centered in the plastic mould and pressed firmly against the septa due to its slightly exceeding edges.

Delivery information: Kits include: 1,5 ml glass crimp neck vial (11,6×32 mm), aluminium crimp cap, clear lacquered with 5,5 mm central hole and septum.


Chrom essentials

Type Capacity (ml) Ø×H (mm) Hardness Septum Thickness (mm) Pk Cat. No.Micro-inserts for wide openingMicro-insert, clear glass, flat bottom

0,2 6×31 1.000 548-0001

Micro-insert, clear glass, with assembled plastic spring

0,1 5,7×29 1.000 548-0002

Micro-insert, clear glass, 15 mm top

0,1 6×31 1.000 548-0006

Micro-insert, clear glass, 12 mm top

0,1 6×31 1.000 548-0310

Micro-insert, clear glass, 15 mm top, silanised

0,1 6×31 1.000 548-0311

Micro-insert, clear glass, with assembled plastic spring, silanised

0,1 6×29 1.000 548-0812

Micro-insert, clear glass, flat bottom, silanised

0,2 6×31 1.000 548-3287

Aluminium crimp caps, ND11 with central hole, 5,5 mm and septum

Clear lacquered aluminium 45° shore APTFE red/silicone white/PTFE red

1,0 1.000 548-0007

Clear lacquered aluminium 60° shore ANatural rubber red-orange/TEF transparent

1,0 1.000 548-0008

Clear lacquered aluminium 45° shore A Silicone white/PTFE red 1,3 1.000 548-0009

Clear lacquered aluminium 45° shore ANatural rubber red-orange/butyl red/TEF

1,0 1.000 548-0010

Green lacquered aluminium 45° shore ANatural rubber red-orange/butyl red/TEF transparent

1,0 1.000 548-0403

Red lacquered aluminium 45° shore ANatural rubber red-orange/butyl red/TEF transparent

1,0 1.000 548-0404

Blue lacquered aluminium 45° shore ANatural rubber red-orange/butyl red/TEF transparent

1,0 1.000 548-0405

Gold lacquered aluminium 45° shore ANatural rubber red-orange/butyl red/TEF transparent

1,0 1.000 548-0406

Clear lacquered aluminium 53° shore D Virgin PTFE 0,25 1.000 548-0408Clear lacquered aluminium 55° shore A Silicone beige/PTFE red 1,5 1.000 548-0409

Clear lacquered aluminium 55° shore ASilicone white/PTFE blue, cross-slitted

1,5 1.000 548-0411

Clear lacquered aluminium 55° shore A Butyl red/PTFE grey 1,3 1.000 548-0790

Clear lacquered aluminium 55° shore APTFE grey/butyl red/PTFE grey

1,3 1.000 548-0804

Red lacquered aluminium 45° shore A Silicone white/PTFE red 1,3 1.000 548-0844Blue lacquered aluminium 45° shore A Silicone white/PTFE red 1,3 1.000 548-0845Gold lacquered aluminium 45° shore A Silicone white/PTFE red 1,3 1.000 548-0847Green lacquered aluminium 45° shore A Silicone white/PTFE red 1,3 1.000 548-0848

Type Capacity (ml) Ø×H (mm) Septum Pk Cat. No.KitsClear glass, magnetic crimp cap, PTFE red/silicone white/PTFE red, 45° shore A, 1,0 mm

1,5 11,6×32 1.000 548-0906

Clear glass, natural rubber/butyl red/TEF, 45° shore A, 1,0 mm 1,5 11,6×32 1.000 548-0172Clear glass, natural rubber red-orange/TEF transparent, 60° shore A, 1,0 mm 1,5 11,6×32 1.000 548-0171Clear glass, PTFE red/silicone white/PTFE red, 45° shore A, 1,0 mm 1,5 11,6×32 1.000 548-0174Clear glass, silicone beige/PTFE red, 55° shore A, 1,5 mm 1,5 11,6×32 1.000 548-0467Clear glass, silicone white/PTFE red, 45° shore A, 1,3 mm 1,5 11,6×32 1.000 548-0173Clear glass with label and filling lines, natural rubber red-orange/butyl red/TEF transparent, 45° shore A, 1,0 mm

1,5 11,6×32 1.000 548-1361

Clear glass with label and filling lines, silicone white/PTFE red, 45° shore A, 1,3 mm

1,5 11,6×32 1.000 548-1465

Amber glass with label, natural rubber red-orange/TEF transparent, 60° shore A, 1,0 mm

1,5 11,6×32 1.000 548-0905

Amber glass with label and filling lines, natural rubber red-orange/butyl red/TEF transparent, 45° shore A, 1,0 mm

1,5 11,6×32 1.000 548-1362

Crimp neck vials, ND11, wide opening, with pre-crimped aluminium cap and septum

Clear glass, clear lacquered aluminium with 5,5 mm central hole 1,5 11,6×32Natural rubber red-orange/butyl red/TEF transp, 60° shore A, 1,3 mm

1.000 548-3311

Clear glass, clear lacquered aluminium with 5,5 mm central hole 1,5 11,6×32Natural rubber red-orange/TEF transp, 60° shore A, 1,0 mm

1.000 548-0474

Amber glass, clear lacquered aluminium with 5,5 mm central hole 1,5 11,6×32Natural rubber red-orange/TEF transp, 60° shore A, 1,0 mm

1.000 548-3310


Type Capacity (ml) Ø×H (mm) Hardness Septum Thickness (mm) Pk Cat. No.Aluminium crimp caps, ND11 with central hole, 5,5 mm and septum

Clear lacquered aluminium, central hole, with roll grove -Aluminium liner, sealed by o-ring

0,06 1.000 548-1505

Clear lacquered aluminium 53° shore DVirgin PTFE (sealed by o-ring)

0,25 1.000 548-1506

Clear lacquered aluminium 60° shore ANatural rubber red-orange/butyl red/TEF transparent

1,0 1.000 548-1797

Clear lacquered aluminium 60° shore ANatural rubber red-orange/butyl red/TEF transparent

1,3 1.000 548-3261

Clear lacquered aluminium 45° shore A Red rubber/PTFE beige 1,0 1.000 548-3272Green lacquered aluminium 45° shore A Red rubber/PTFE beige 1,0 1.000 548-3303Red lacquered aluminium 45° shore A Red rubber/PTFE beige 1,0 1.000 548-3304Blue lacquered aluminium 45° shore A Red rubber/PTFE beige 1,0 1.000 548-3305Gold lacquered aluminium 45° shore A Red rubber/PTFE beige 1,0 1.000 548-3306Magnetic crimp caps, ND11 with central hole, 5 mm and septum for CTC PAL and Thermo Scientific TriPlus autosamplers

Gold lacquered 45° shore APTFE red/silicone white/PTFE red

1,0 1.000 548-0082

Gold lacquered 45° shore A Silicone white/PTFE red 1,3 1.000 548-0407

Type Capacity (ml) Ø×H (mm) Pk Cat. No.Snap ring vials, ND11Clear glass with integrated micro-insert, „base bonded“ 0,25 11,6×32 1.000 548-1441Clear glass 1,5 11,6×32 1.000 548-0011Clear glass with label and filling lines 1,5 11,6×32 1.000 548-0422Amber glass with label and filling lines 1,5 11,6×32 1.000 548-0012Plastic snap ring vials, ND11PP transparent, conical insert 0,3 11,6×32 1.000 548-0120TPX transparent, conical insert 0,3 11,6×32 1.000 548-0451PP transparent, cylindrical insert 0,7 11,6×32 1.000 548-0895PP amber, conical insert 0,3 11,6×32 1.000 548-0454KitsClear glass, septum natural rubber red-orange/TEF transparent, 60° shore A, 1,0 mm

1,5 11,6×32 100 548-0470

Clear glass, septum silicone white/PTFE red, 45° shore A, 1,3 mm 1,5 11,6×32 100 548-0471Clear glass, septum silicone white/PTFE blue, cross-slitted 55° shore A, 1,0 mm 1,5 11,6×32 100 548-0472Clear glass, septum PTFE red/silicone white/PTFE red, 45° shore A, 1,0 mm 1,5 11,6×32 100 548-0473

Type Capacity (ml) Ø×H (mm) Hardness Septum Thickness (mm) Pk Cat. No.Micro-inserts for wide openingMicro-insert, clear glass, flat bottom 0,2 6×31 1.000 548-0001Micro-insert, clear glass, with assembled plastic spring

0,1 5,7×29 1.000 548-0002

Micro-insert, clear glass, 15 mm top 0,1 6×31 1.000 548-0006Micro-insert, clear glass, 12 mm top 0,1 6×31 1.000 548-0310Micro-insert, clear glass, 15 mm top, silanised 0,1 6×31 1.000 548-0311Micro-insert, clear glass, with assembled plastic spring, silanised

0,1 6×29 1.000 548-0812

Micro-insert, clear glass, flat bottom, silanised 0,2 6×31 1.000 548-3287Snap ring caps, ND11 PE with central hole, 6 mm and septa

PE blue, hard version 60° shore ANatural rubber red-orange/TEF transparent

1,0 1.000 548-0433

PE blue, hard version 45° shore A PTFE red/silicone white/PTFE red 1,0 1.000 548-0434PE blue, hard version 55° shore A Silicone white/PTFE blue, cross-slitted 1,0 1.000 548-0435PE blue, hard version 45° shore A Silicone white/PTFE red 1,3 1.000 548-0432PE blue, hard version 45° shore A Silicone white/PTFE red, pre-cut (Y) 1,3 1.000 548-3332

Snap ring vials, ND11These vials are preferentially used on instruments of the following manufacturers: Agilent, CTC, DANI, Dionex, Jasco, Shimadzu, Spark, Thermo Scientific, Varian, VWR/Hitachi, Waters®, etc.

• This vial-/closure system is recommended for HPLC applications only• Universally usable vials for almost all autosamplers, even for those with robotic

handling• Micro-inserts can be delivered pre-assembled in vials• Vials can also be crimped with a standard 11 mm aluminium crimp seal, as the two

snap ring lips have the same height as a crimp neck• Wide opening enables easy filling with viscous materials


Chrom essentials

Type Capacity (ml) Ø×H (mm) Hardness Septum Thickness (mm) Pk Cat. No.Snap ring caps, ND11 PE with central hole, 6 mm and septa

PE blue, soft version 60° shore ANatural rubber red-orange/TEF transparent

1,0 1.000 548-3207

PE blue, soft version 45° shore A PTFE red/silicone white/PTFE red 1,0 1.000 548-3209PE blue, soft version 45° shore A Red rubber/PTFE beige 1,0 1.000 548-0897PE blue, soft version 45° shore A Red rubber/PTFE beige 1,0 1.000 548-3360PE blue, soft version 55° shore A Silicone white/PTFE blue, cross-slitted 1,0 1.000 548-3210PE blue, soft version 45° shore A Silicone white/PTFE red 1,3 1.000 548-3208PE blue, soft version 45° shore A Silicone white/PTFE red, pre-cut (Y) 1,3 1.000 548-3334

PE green, hard version 60° shore ANatural rubber red-orange/TEF transparent

1,0 1.000 548-0165

PE green, hard version 45° shore A PTFE red/silicone white/PTFE red 1,0 1.000 548-3346PE green, hard version 55° shore A Silicone white/PTFE blue, cross-slitted 1,0 1.000 548-0893PE green, hard version 45° shore A Silicone white/PTFE red UltraClean 1,3 1.000 548-1519

PE red, hard version 60° shore ANatural rubber red-orange/TEF transparent

1,0 1.000 548-0436

PE red, hard version 45° shore A PTFE red/silicone white/PTFE red 1,0 1.000 548-0437PE red, hard version 55° shore A Silicone white/PTFE blue, cross-slitted 1,0 1.000 548-0439PE red, hard version 45° shore A Silicone white/PTFE red 1,3 1.000 548-0438PE transparent 55° shore A Silicone white/PTFE blue, pre-cut (Y) 1,0 1.000 548-0188

PE transparent, hard version 60° shore ANatural rubber red-orange/TEF transparent

1,0 1.000 548-0014

PE transparent, hard version 45° shore A PTFE red/silicone white/PTFE red 1,0 1.000 548-0015PE transparent, hard version 45° shore A Red rubber/PTFE beige 1,0 1.000 548-3358PE transparent, hard version 55° shore A Silicone white/PTFE blue, cross-slitted 1,0 1.000 548-0017PE transparent, hard version 45° shore A Silicone white/PTFE red 1,3 1.000 548-0016PE transparent, hard version 45° shore A Silicone white/PTFE red, pre-cut (Y) 1,3 1.000 548-3331

PE transparent, soft version 60° shore ANatural rubber red-orange/TEF transparent

1,0 1.000 548-3203

PE transparent, soft version 45° shore A PTFE red/silicone white/PTFE red 1,0 1.000 548-3204PE transparent, soft version 45° shore A Red rubber/PTFE beige 1,0 1.000 548-3330PE transparent, soft version 55° shore A Silicone white/PTFE blue, cross-slitted 1,0 1.000 548-3206PE transparent, soft version 45° shore A Silicone white/PTFE red 1,3 1.000 548-3205PE transparent, soft version 45° shore A Silicone white/PTFE red, pre-cut (Y) 1,3 1.000 548-3333

PE yellow, hard version 60° shore ANatural rubber red-orange/TEF transparent

1,0 1.000 548-0166

PE yellow, hard version 45° shore A PTFE red/silicone white/PTFE red 1,0 1.000 548-0851PE yellow, hard version 55° shore A Silicone white/PTFE blue, cross-slitted 1,0 1.000 548-0892PE yellow, hard version 45° shore A Silicone white/PTFE red 1,3 1.000 548-3211

Type Capacity (ml) Ø×H (mm) Pk Cat. No.Screw neck vials, ND13Clear glass 4 14,7×45 1.000 548-0051Clear glass with label and filling lines 4 14,7×45 1.000 548-0509Amber glass 4 14,7×45 1.000 548-0052Amber glass with label and filling lines 4 14,7×45 1.000 548-0510KitsClear glass, screw cap PP black, central hole 8,5 mm with septum natural rubber red-orange/TEF transparent, 60° shore A, 1,3 mm 4 14,7×45 100 548-0519Clear glass, screw cap PP black, central hole 8,5 mm with septum PTFE red/silicone white/PTFE red, 45° shore A, 1,0 mm 4 14,7×45 100 548-0522Clear glass, screw cap PP black, central hole 8,5 mm with septum silicone beige/PTFE red, 55° shore A, 1,5 mm 4 14,7×45 100 548-0521Clear glass, screw cap PP black, central hole 8,5 mm with septum virgin PTFE, 53° shore D, 0,25 mm 4 14,7×45 100 548-0523Clear glass, screw cap PP black, central hole 8,5 mm with septum virgin PTFE, 53° shore D, 0,25 mm 4 14,7×45 840 548-1395Clear glass, screw cap PP black, closed top with septum virgin PTFE, 53° shore D, 0,25 mm 4 14,7×45 100 548-0529Amber glass, screw cap PP black, central hole 8,5 mm with septum silicone beige/PTFE red, 55° shore A, 1,5 mm 4 14,7×45 100 548-0526Amber glass, screw cap PP black, central hole 8,5 mm with septum virgin PTFE, 53° shore D, 0,25 mm 4 14,7×45 100 548-0528

Screw neck vials, ND13These vials are preferentially used on instruments of the following manufacturers: Dionex, Shimadzu, Spark, Varian, VWR/Hitachi, Waters® (Wisp 48 position carousel), etc.

• Any combination of 4 ml screw neck vial ND13 with one of the 13 mm PP screw seals can be ordered as a 2 in1 kit

• Upon request barcode labelled vials can also be supplied• For storage purposes also available with closed top screw seals

Delivery information: Kits include: 4 ml glass screw cap vial (14,7×45 mm), PP black screw cap with 8,5 mm central hole or closed top and septum.


Type Capacity (ml) Ø×H (mm) Hardness Septum Thickness (mm) Pk Cat. No.Micro-insert for 4 ml screw neck vialsClear glass, 15 mm top (needs 548-0094)

0,3 6×40 1.000 548-0093

Metallic spring for 548-0093 7,5×50 1.000 548-0094Screw cap PP with central hole, 8,5 mm and septa, ND13PP black 55° shore A Butyl red/PTFE grey 1,3 1.000 548-0794

PP black 60° shore ANatural rubber red-orange/TEF transparent

1,3 1.000 548-0053

PP black 45° shore A PTFE red/ silicone white/PTFE red 1,0 1.000 548-0511PP black 45° shore A RedRubber/PTFE beige 1,0 1.000 548-1082PP black 55° shore A Silicone beige/PTFE red 1,5 1.000 548-0054PP black 55° shore A Silicone white/PTFE blue, slitted 1,5 1.000 548-0191PP black, closed top 55° shore A Butyl red/PTFE grey 1,3 1.000 548-0805

PP black, closed top 60° shore ANatural rubber red-orange/TEF transparent

1,3 1.000 548-0512

PP black, closed top 55° shore A Silicone cream/PTFE red 1,5 1.000 548-0514Septa 12 mmButyl red/PTFE grey 55° shore A 1,3 1.000 548-0108Natural rubber red-orange/TEF transparent 60° shore A 1,3 1.000 548-0476PTFE red/silicone white/PTFE red 45° shore A 1,0 1.000 548-0479Silicone beige/PTFE red 55° shore A 1,5 1.000 548-0475Silicone blue transparent/PTFE white 45° shore A 1,3 1.000 548-0112Silicone white/aluminium foil silver 50° shore A 1,3 1.000 548-1554Silicone white/PTFE blue, cross-slitted 55° shore A 1,5 1.000 548-0477Virgin PTFE 53° shore D 0,25 1.000 548-0111Screw cap PP, ND13 without septumBlack, central hole 8,5 mm 1.000 548-0096Black, closed 1.000 548-0097White, closed 1.000 548-0506

Type Capacity (ml) Ø×H (mm) Pk Cat. No.Clear glass 2 16×32 1.000 548-0859

Special crimp neck vials, ND13

548-0859

Aluminium crimp caps ND13

548-0488

Type Hardness Septum Thickness (mm) Pk Cat. No.Clear lacquered, central hole 55° shore A Butyl red/PTFE grey 2,0 1.000 548-0496Clear lacquered, central hole 50° shore A Pharma-Fix (butyl/PTFE) 2,0 1.000 548-0488Clear lacquered, centre tear-off

55° shore A Butyl red/PTFE grey 2,0 1.000 548-0498


Chrom essentials

Type Capacity (ml) Ø×H (mm) Pk Cat. No.Headspace screw neck vials with precision thread, ND18 (only suitable for magnetic caps)Clear glass (CTC PAL: Varian, Gerstel, Atas, Shimadzu, Agilent) 10 22,5×46 1.000 548-0247Amber glass (CTC PAL: Varian, Gerstel, Atas, Shimadzu) 10 22,5×46 1.000 548-0552Clear glass (CTC PAL: Varian, Gerstel, Atas, Shimadzu, Agilent) 20 22,5×75,5 1.000 548-0248Amber glass (CTC PAL: Varian, Gerstel, Atas, Shimadzu, Agilent) 20 22,5×75,5 1.000 548-2093Headspace screw caps vial, ND18 (only suitable for PP caps)Clear glass 20 23×75,5 1.000 548-0549KitsClear glass, magnetic cap silver, central hole 8 mm with septum butyl red/PTFE grey, 55° shore A, 1,6 mm 20 22,5×75,5 1.000 548-0563Clear glass, magnetic cap silver, central hole 8 mm with septum silicone blue transparent/PTFE white, 45° shore A, 1,3 mm 20 22,5×75,5 1.000 548-0564Clear glass, magnetic cap silver, central hole 8 mm with septum silicone white/PTFE blue, 60° shore A, 1,5 mm 20 22,5×75,5 1.000 548-0562

Type Hardness Septum Thickness (mm) Pk Cat. No.Magnetic screw caps, ND18 and septum, ND18Silver, central hole 8 mm 55° shore A Butyl red/PTFE grey 1,6 1.000 548-0246Silver, central hole 8 mm 45° shore A Silicone blue transparent/PTFE white 1,3 1.000 548-0543Silver, central hole 8 mm 50° shore A Silicone white/aluminium foil silver 1,3 1.000 548-3316Silver, central hole 8 mm 55° shore A Silicone white/PTFE blue 1,5 1.000 548-0245Silver, central hole 8 mm 45° shore A Silicone white/PTFE red 1,3 1.000 548-0193Silver, central hole 8 mm 55° shore A Silicone white/PTFE red, precut for SPME 1,5 1.000 548-3339Silver, central hole 8 mm 70° shore A Viton black 1,0 1.000 548-0546Silver, closed top 55° shore A Butyl red/PTFE grey 1,6 1.000 548-0811Silver, closed top 45° shore A Silicone white/PTFE red 1,3 1.000 548-0822Closed top PP screw caps for storage vialsPP black, closed, for 548-3027, 548-0549 55° shore A Silicone white/PTFE red 1,5 1.000 548-3363

Headspace screw neck vials with precision thread, ND18Vials, closures, septa and kits.

• No risk of incorrectly sealed vials as is the case with crimping • More convenient to close and open, especially as magnetic crimp caps are very hard

to crimp • Lower coring and protection for the needle due to thinner septa• Universal use for Headspace and SPME due to thinner septa• Special pre-cut septa (silicone layer is slitted but PTFE remains intact) for safe

penetration of the sensitive SPME phase with hardly any coring

Tested and approved by CTC for their Combi PAL (Gerstel, Atas, Agilent), also recommended by Agilent for their G1888A samplers, by Shimadzu for AOC5000 and for PerkinElmer TurboMatrix autosamplers (models after 1/9/2006).

Delivery information: Kits include 20 ml clear glass precision screw neck headspace vial (22,5×75,5 mm), magnetic screw cap silver with 8 mm central hole and septum.

Headspace crimp vials, ND20Clear and amber glass vials with a rounded or flat bottom and volumes from 5 to 20 ml and closures. A rounded bottom vial is more sturdy and resistant to high pressure during the heating process. Flat bottom vials are more appropriate for certain instruments.

• Pressure release safety caps with a broad range of different septa available• Magnetic and magnetic bimetal caps for CTC Combi PAL and Shimadzu AOC5000

autosamplers• Caps with Pharma-Fix septa (Butyl/PTFE) achieve the best sealing properties• Vials can withstand high internal pressure due to their wall thickness of 1,2 mm

Type Capacity (ml) Ø×H (mm) Pk Cat. No.Headspace crimp vials, ND20Clear glass, bevel type, rounded bottom (PerkinElmer) 5 22×38,2 1.000 548-0057Clear glass, bevel type, rounded bottom, with label and filling lines (PerkinElmer, Tekmar)

20 23×75,5 1.000 548-0610

Clear glass, bevel type, rounded bottom (PerkinElmer, Tekmar) 20 23×75,5 1.000 548-0055Clear glass, flat bottom (Varian) 5 20×38 1.000 548-0611Clear glass, flat bottom 10 20×54 1.000 548-0612Clear glass, flat bottom, long neck (Carlo Erba, Dani, Fisons, Agilent) 10 22,5×46 1.000 548-0090Clear glass, flat bottom, long neck (Carlo Erba, Dani, Fisons, Agilent) 20 22,5×75,5 1.000 548-0091Clear glass, flat bottom, long neck (Agilent) 20 22,75×75,5 1.000 548-1994Clear glass, rounded bottom (Carlo Erba, Fisons, CTC, Varian (CP)) 10 22,5×46 1.000 548-0133


Type Hardness Septum Thickness (mm) Pk Cat. No.Aluminium crimp cap, ND20 with central hole, 10 mm and septaAluminium, central hole 10 mm 50° shore A Butyl/PTFE, grey 3,0 1.000 548-0060Aluminium, central hole 10 mm 50° shore A Butyl dark grey 3,0 1.000 548-0580Aluminium, central hole 10 mm - Butyl stopper, grey (unassembled) - 1.000 548-0058

Aluminium, central hole 10 mm 60° shore ANatural rubber red-orange/TEF transparent

1,3 1.000 548-0594

Aluminium, central hole 10 mm 50° shore A Pharma-Fix butyl/PTFE 3,0 1.000 548-0059Aluminium, central hole 10 mm 50° shore A Silicone aluminium foil silver 3,0 1.000 548-0587Aluminium, central hole 10 mm 45° shore A Silicone blue transparent/PTFE white 3,0 1.000 548-0061Aluminium, central hole 10 mm 45° shore A Silicone blue transparent/PTFE white 1,3 1.000 548-0589Aluminium, central hole 10 mm 45° shore A Silicone white/PTFE beige 3,2 1.000 548-0593Aluminium gold, central hole 10 mm 50° shore A Pharma-Fix butyl/PTFE 3,0 1.000 548-0578Blue lacquered aluminium 50° shore A Butyl/PTFE, grey 3,0 1.000 548-3229Blue lacquered aluminium 50° shore A Pharma-Fix butyl/PTFE 3,0 1.000 548-1360Clear lacquered aluminium, complete tear-off - Butyl stopper, grey (unassembled) - 1.000 548-1392Gold lacquered aluminium 50° shore A Butyl/PTFE, grey 3,0 1.000 548-0598Gold lacquered aluminium, complete tear-off 50° shore A Butyl/PTFE, grey 3,0 1.000 548-0588Green lacquered aluminium 55° shore A Butyl, dark grey 3,0 1.000 548-3264Green lacquered aluminium 50° shore A Butyl/PTFE, grey 3,0 1.000 548-3228Red lacquered aluminium 55° shore A Butyl, dark grey 3,0 1.000 548-3318Red lacquered aluminium 50° shore A Butyl/PTFE, grey 3,0 1.000 548-3227Aluminium headspace caps, ND20 with septaClear lacquered aluminium 50° shore A Butyl/PTFE, grey 3,0 1.000 548-0062Clear lacquered aluminium 55° shore A Butyl dark grey 3,0 1.000 548-0579Clear lacquered aluminium 50° shore A Pharma-Fix butyl/PTFE 3,0 1.000 548-0064Clear lacquered aluminium 45° shore A Silicone blue transparent/PTFE white 3,0 1.000 548-0063Clear lacquered aluminium 50° shore A Silicone white/aluminium foil silver 3,0 1.000 548-0065Clear lacquered aluminium 45° shore A Silicone white/PTFE beige 3,2 1.000 548-0592Magnetic crimp caps, ND20 with central hole and septa (CTC Combi PAL)Bimetal red/silver, central hole 8 mm 50° shore A Butyl/PTFE grey 3,0 1.000 548-2091Bimetal red/silver, central hole 8 mm 50° shore A Butyl/PTFE grey 3,0 1.000 548-3230

Bimetal red/silver, central hole 8 mm 45° shore ASilicone blue transparent/PTFE transparent

3,0 1.000 548-2097

Bimetal red/silver, central hole 8 mm 45° shore A Silicone white/PTFE beige 3,2 1.000 548-3320Gold, central hole 5 mm 50° shore A Butyl/PTFE, grey 3,0 1.000 548-0067Gold, central hole 5 mm 55° shore A Butyl dark grey 3,0 1.000 548-0591Gold, central hole 5 mm 50° shore A Pharma-Fix butyl/PTFE 3,0 1.000 548-0068Gold, central hole 5 mm 50° shore A Silicone aluminium foil silver 3,0 1.000 548-0590

Gold, central hole 5 mm 45° shore ASilicone blue transparent/PTFE transparent

3,0 1.000 548-0066

Gold, central hole 8 mm 50° shore A Butyl/PTFE grey 3,0 1.000 548-0116Gold, central hole 8 mm 55° shore A Butyl dark grey 3,0 1.000 548-0595Gold, central hole 8 mm 55° shore A Butyl red/PTFE grey 1,3 1.000 548-3319Gold, central hole 8 mm 50° shore A Pharma-Fix butyl/PTFE 3,0 1.000 548-0117

Gold, central hole 8 mm 45° shore ASilicone blue transparent/PTFE transparent

3,0 1.000 548-0152

Gold, central hole 8 mm 45° shore A Silicone white/PTFE beige 3,2 1.000 548-1058Gold, central hole 8 mm 75° shore A Viton black 0,5 1.000 548-0597Other aluminium crimp caps, ND20Central hole, clear lacquered - - - 1.000 548-1391Centre Tear-off cap, clear lacquered - - - 1.000 548-3278Centre Tear-off cap, clear lacquered 50° shore A Butyl/PTFE grey 3,0 1.000 548-0582Centre Tear-off cap, clear lacquered 55° shore A Butyl dark grey 3,0 1.000 548-0583Centre Tear-off cap, clear lacquered 50° shore A Pharma-Fix butyl/PTFE 3,0 1.000 548-0576Centre Tear-off cap, clear lacquered 45° shore A Silicone blue transparent/PTFE white 3,0 1.000 548-0585Complete Tear-off cap, clear lacquered - - - 1.000 548-3317Complete Tear-off cap, clear lacquered 50° shore A Butyl/PTFE grey 3,0 1.000 548-0581Complete Tear-off cap, clear lacquered 55° shore A Butyl dark grey 3,0 1.000 548-0584Complete Tear-off cap, clear lacquered 50° shore A Pharma-Fix butyl/PTFE 3,0 1.000 548-0577Complete Tear-off cap, clear lacquered 45° shore A Silicone blue transparent/PTFE white 3,0 1.000 548-0586Complete Tear-off cap, gold lacquered - - - 1.000 548-1565Complete Tear-off cap, green lacquered - - - 1.000 548-1566Complete Tear-off cap, red lacquered - - - 1.000 548-3370

Type Capacity (ml) Ø×H (mm) Pk Cat. No.Headspace crimp vials, ND20Clear glass, rounded bottom (CTC PAL Varian, Gerstel, Atas, Shimadzu) 20 22,5×75,5 1.000 548-0151Clear glass, rounded bottom, DIN crimp neck, long neck, with label and filling lines

20 22,5×75,5 1.000 548-0891

Amber glass, rounded bottom (Carlo Erba, Fisons, CTC, Varian (CP)) 10 22,5×46 1.000 548-0799Amber glass, rounded bottom (CTC PAL Varian, Gerstel, Atas, Shimadzu) 20 22,5×75,5 1.000 548-0798Amber glass, bevel type, rounded bottom (PerkinElmer, Tekmar) 20 23×75,5 1.000 548-0614Other crimp neck vials, ND20Clear glass, flat neck, flat bottom 50 31×101 1.000 548-2092Clear glass, flat neck, flat bottom 100 51,6×94,5 88 548-0609


Chrom essentials

Type Hardness Septum Thickness (mm) Pk Cat. No.For bevelled neck 55° shore A Butyl red/PTFE grey 1,3 1.000 548-0870

For bevelled neck 60° shore ANatural rubber red-orange/TEF transparent

1,3 1.000 548-0153

For bevelled neck 45° shore ASilicone blue transparent/PTFE white

1,3 1.000 548-0629

For flat neck 55° shore A Butyl red/PTFE grey 1,3 1.000 548-0800

For flat neck 60° shore ANatural rubber red-orange/TEF transparent

1,3 1.000 548-0631

For flat neck 45° shore ASilicone blue transparent/PTFE white

1,3 1.000 548-0632

For flat neck 45° shore ASilicone blue transparent/PTFE white, Y-slitted

1,3 1.000 548-3263

For flat neck 45° shore ASilicone blue transparent/PTFE white, Y-slitted *

1,3 1.000 548-1399

* with central hole 6 mm

Other caps for crimp neck ND20 with septumPE, transparent

Combinations of PE caps with central hole 4,3 mm and septa.

For vials with bevelled neck, cap Ø×h: 22×8,4 mm

For vials with flat neck, cap Ø×h: 22×9,1 mm

548-0153

SPME crimp neck vial, ND20

548-0613

Type Capacity (ml) Ø×H (mm) Septum Pk Cat. No.EPA screw neck vials, ND24Clear glass 20 27,5×57 100 548-0154Clear glass 30 27,5×72,5 100 548-0155Clear glass 40 27,5×95 100 548-0156Clear glass 60 27,5×140 100 548-0640Clear glass, with certificate 20 27,5×57 1.000 548-1462Clear glass, with certificate 30 27,5×72,5 1.000 548-1463Clear glass, with certificate 40 27,5×95 100 548-1390Amber glass 20 27,5×57 100 548-0638Amber glass 30 27,5×72,5 100 548-0637Amber glass 40 27,5×95 100 548-0639Amber glass 60 27,5×140 100 548-0641

Type Capacity (ml) Ø×H (mm) Pk Cat. No.Clear glass for CTC PAL 20 22,5×75,5 100 548-0613

Type Hardness Septum Thickness (mm) Pk Cat. No.Magnetic seals for SPME-vial 548-0613

Gold, central hole 8 mm 55° shore ASilicone white/PTFE blue

1,5 1.000 548-0596

Septa/stoppers 20 mmPharma-Fix butyl/PTFE 50° shore A 3,0 1.000 548-0568Butyl/PTFE grey 50° shore A 3,0 1.000 548-0569Butyl dark grey 55° shore A 3,0 1.000 548-0570Silicone blue transparent/PTFE white 45° shore A 3,0 1.000 548-0571Silicone white/aluminium 50° shore A 3,0 1.000 548-0572Silicone white/PTFE beige 45° shore A 3,25 1.000 548-0573Natural rubber red-orange/TEF transparent

60° shore A 1,3 1.000 548-0574

Silicone white/PTFE blue 55° shore A 1,5 1.000 548-0807Butyl red/PTFE grey 55° shore A 2,0 1.000 548-0808Viton black 70° shore A 1,5 1.000 548-0869Silicone blue transparent/PTFE transparent

45° shore A 3,0 1.000 548-1059

Butyl injection stopper, grey 1.000 548-3369

EPA screw neck vials, ND24These vials are preferentially used on instruments of the following manufacturers: Agilent, Dionex, Shimadzu, Tekmar, Thermo Scientific, Varian.

• All types of EPA vials can be delivered with a certificate of cleanliness that might especially be needed for TOC analysis - surcharges apply

• EPA vials can be ordered with any type of screw seal ND24 already screwed on


Type Hardness Septum Thickness (mm) Pk Cat. No.UltraBond™ seals, ND24: PP screw caps with silicone white/PTFE beige septaPP white with central hole 15 mm 45° shore A Silicone natural/PTFE beige 3,2 1.000 548-0157PP white, closed 45° shore A Silicone natural/PTFE beige 3,2 1.000 548-0636PP screw caps, ND24 without septumPP white with central hole 12,5 mm 1.000 548-0160PP white, closed 1.000 548-0161Septa 22 mmButyl red/PTFE grey 55° shore A 2,5 1.000 548-0134Silicone aluminium foil silver 50° shore A 3,0 1.000 548-0616Silicone blue transparent, PTFE white 45° shore A 1,3 1.000 548-3338Silicone natural/PTFE beige (EPA-quality)

45° shore A 3,2 1.000 548-0159

Silicone white/PTFE blue, cross-slitted 55° shore A 1,5 1.000 548-0615Silicone white/PTFE red 45° shore A 1,3 1.000 548-3232PP screw caps, ND24 with septumPP white, closed 55° shore A Butyl red/PTFE grey 2,5 1.000 548-0642PP white, closed 45° shore A Silicone natural/PTFE beige 3,2 1.000 548-2096PP white, with 12,5 mm central hole 55° shore A Butyl red/PTFE grey 2,5 1.000 548-0872PP white, with 12,5 mm central hole 45° shore A Silicone natural/PTFE beige 3,2 1.000 548-0031

Snap cap vials, ND18, ND22 and ND28These vials can be used for storage of powders and solids.

• Caps and vials can be ordered separately• Quick and easy to reopen and reseal• No liners are required in the cap

Type Capacity (ml) Ø×H (mm) Pk Cat. No.Snap cap vials, ND18, ND22 and ND28Clear glass with snap-cap, PE transparent, 18 mm 3 18×30 200 548-0554Clear glass with snap-cap, PE transparent, 18 mm 5 20×40 200 548-0555Clear glass with snap-cap, PE transparent, 22 mm 15 24×52 200 548-0620Clear glass with snap-cap, PE transparent, 22 mm 10 22×50 200 548-0621Clear glass with snap-cap, PE transparent, 22 mm 10 22×45 200 548-0625Clear glass with snap-cap, PE transparent, 22 mm 20 26×70 200 548-0622Clear glass with snap-cap, PE transparent, 22 mm 20 26×55 200 548-0623Clear glass with snap-cap, PE transparent, 28 mm 25 30×50 250 548-0649Clear glass with snap-cap, PE transparent, 22 mm 30 28×75 200 548-0624Clear glass with snap-cap, PE transparent, 28 mm 40 30×80 200 548-0650Clear glass with snap-cap, PE transparent, 28 mm 50 30×100 200 548-0651Clear glass with snap-cap, PE transparent, 28 mm 100 34×145 100 548-0652Vials without capClear glass ND18 5 20×40 1.000 548-0141Clear glass ND18 10 22×50 1.000 548-0142Clear glass ND22 15 26×48 1.000 548-0143Clear glass ND22 25 26×65 100 548-0144

Type Pk Cat. No.Separate snap capsSnap-cap PE ND18, transparent, closed 1.000 548-0145Snap-cap PE ND22, transparent, closed 1.000 548-0146Snap-cap PE ND28, transparent, closed 1.000 548-0648

Type Capacity (ml) Ø×H (mm) Septum Pk Cat. No.EPA screw neck vials, ND24 pre-assembled, with screw seals

Clear glass, pre-assembled with white screw cap central hole 40 27,5×95 Silicone natural/PTFE beige, 45° shore A, 3,2 mm 1.000 548-0825

Clear glass, pre-assembled with white screw cap central hole 60 27,5×140 Silicone natural/PTFE beige, 45° shore A, 3,2 mm 1.000 548-3236Clear glass, pre-assembled with white UltraBond screw cap central hole

20 27,5×57 Silicone natural/PTFE beige (EPA quality), 45° shore A, 3,2 mm 1.000 548-1057

Clear glass, pre-assembled with white UltraBond screw cap central hole

40 27,5×95 Silicone natural/PTFE beige (EPA quality), 45° shore A, 3,2 mm 1.000 548-3237

Amber glass, pre-assembled with white screw cap central hole 40 27,5×95 Silicone natural/PTFE beige, 45° shore A, 3,2 mm 1.000 548-3235


Chrom essentials

Type Capacity (ml) Ø×H (mm) Pk Cat. No.Clear glass 50 44×69,5 105 548-2006

Type Hardness Septum Thickness (mm) Pk Cat. No.Screw caps, ND40 with septaScrew cap black, closed top 53° shore D PTFE virginal 0,5 85 548-0661

Screw neck vials, ND40Cylindrical jars ND40 for soil samples.

548-0660

Type Capacity (ml) Ø×H (mm) Pk Cat. No.Shell vials with PE plugClear glass, 6 mm plug for Alcott 1 7,8×35 1.000 548-0347Clear glass, 8 mm plug for Waters/Shimadzu with inner barrier for micro-insert

1 8,2×40 1.000 548-0042

Amber glass, 8 mm plug for Waters/Shimadzu with inner barrier for micro-insert

1 8,2×40 1.000 548-0043

Clear glass, 8 mm plug for Waters/Shimadzu no inner barrier for micro-insert

1 8,2×40 1.000 548-0352

Amber glass, 8 mm plug for Waters/Shimadzu no inner barrier for micro-insert

1 8,2×40 1.000 548-0353

Clear glass, 12 mm plug 2 11,6×31,5 1.000 548-0045Amber glass, 12 mm plug 2 11,6×31,5 1.000 548-0046Clear glass 2 11,6×31,5 1.000 548-0449Clear glass, 15 mm plug for Waters 4 14,65×44,6 1.000 548-0048Amber glass, 15 mm plug for Waters 4 14,65×44,6 1.000 548-0049

Type Capacity (ml) Ø×H (mm) Pk Cat. No.Micro-inserts for wide openingMicro-insert, clear glass, flat bottom 0,2 6×31 1.000 548-0001Micro-insert, clear glass, 15 mm top 0,1 6×31 1.000 548-0006Micro-insert, clear glass, 13 mm top 0,1 5×34 1.000 548-0044Micro-insert, clear glass, 13 mm top 0,3 6×43 1.000 548-0050Micro-insert, clear glass, 12 mm top 0,1 6×31 1.000 548-0310Micro-insert, clear glass, 15 mm top, silanised 0,1 6×31 1.000 548-0311Micro-insert, clear glass, flat bottom, silanised 0,2 6×31 1.000 548-3287Separate plugs8 mm plug, transparent, with inner barrier for micro-insert 1.000 548-08308 mm plug, transparent, without inner barrier for micro-insert 1.000 548-138912 mm plug, transparent 1.000 548-0481

Shell vials with PE plugThese vials are preferentially used on instruments of the following manufacturers: Alcott, Gilson, Shimadzu, Waters® (Wisp 96 respectively 48 position carousel).

• Micro-insert can be fixed in PE plug, no spring required• Star shaped diaphragm enables easy penetration of the plug with an injection

needle• 1 ml shell vials with no inner barrier for micro-insert are more convenient in

handling and safer to penetrate

548-0045


Storage vialsScrew neck vials in clear or in amber glass, hydrolytic class 1, for sample storage. A broad range of closed top screw caps are available with different types of septa.

548-0639

Type Capacity (ml) Ø×H (mm) Pk Cat. No.Clear glass microlitre crimp neck vials with wide opening 1,1 11,6×32 1.000 548-2007Clear glass microlitre short thread vials with small opening 1,1 11,6×32 1.000 548-1373Clear glass snap ring vials with wide opening 1,5 11,6×32 1.000 548-2087Amber glass crimp neck vials with wide opening, with label and graduations

1,5 11,6×32 1.000 548-1364

Amber glass screw neck vials with small opening, thread 8 - 425, with label and graduations

1,5 11,6×32 1.000 548-2089

Amber glass snap ring vials with wide opening, with label and graduations

1,5 11,6×32 1.000 548-2086

Silanised vialsImprove sample analysis sensitivity by eliminating sample/glass reactions.

• Ideal for high sensitivity HPLC applications• Deactivitated glass surface, eliminating reactions between polar compounds and

the glass• Ideal for amino acids, proteins or phenols • Hydrolytic class 1 glass

548-1364

Type Capacity (ml) Ø×H (mm) Septum Hardness Thickness (mm) Pk Cat. No.Screw neck vials for storage purposesAmber glass 8 16,6×61 1.000 548-0889Amber glass 12 18,5×66 1.000 548-0903Clear glass 8 16,6×61 1.000 548-0821Clear glass 12 18,5×66 1.000 548-0820Clear glass 16 20,6×71 1.000 548-3027Clear glass 20 22,7×86 1.000 548-3231Screw neck vials, ND8Amber glass 1,5 11,6×32 1.000 548-0448Clear glass 1,5 11,6×32 1.000 548-0018Screw neck vials, ND13Amber glass 4 14,7×45 1.000 548-0052Clear glass 4 14,7×45 1.000 548-0051PP screw caps with 9 mm centre hole for storage vialsPP screw cap for 548-0821, 548-0889, 548-0820, 548-0903 Natural rubber red-orange/TEF transparent 60° shore A 1,3 1.000 548-3364PP screw cap for 548-0821, 548-0889, 548-0820, 548-0903 Silicone white/PTFE red 45° shore A 1,3 1.000 548-3335PP screw caps for 548-0821, 548-0889, 548-0820, 548-0903 Butyl red/PTFE grey 55° shore A 1,6 1.000 548-1393EPA screw neck vials, ND24Amber glass 20 27,5×57 100 548-0638Amber glass 30 27,5×72,5 100 548-0637Amber glass 40 27,5×95 100 548-0639Amber glass 60 27,5×140 100 548-0641Clear glass 20 27,5×57 100 548-0154Clear glass 30 27,5×72,5 100 548-0155Clear glass 40 27,5×95 100 548-0156Clear glass 60 27,5×140 100 548-0640Clear glass, with certificate

40 27,5×95 100 548-1390

Closed top PP screw caps for storage vialsPP black, closed, for 548-0821, 548-0889, 548-0820, 548-0903 Butyl red/PTFE grey 55° shore A 1,3 1.000 548-0861PP black, closed, for 548-0821, 548-0889, 548-0820, 548-0903 Natural rubber red-orange/TEF transparent 60° shore A 1,3 1.000 548-0862PP black, closed, for 548-0821, 548-0889, 548-0820, 548-0903 Silicone white/PTFE red 45° shore A 1,3 1.000 548-0863PP black, closed, for 548-3027, 548-0549 Silicone white/PTFE red 55° shore A 1,5 1.000 548-3363PP white, closed, for 548-0154, 548-0638, 548-0155, 548-0637, 548-0156, 548-0639, 548-0640, 548-0641

PTFE/EPDM black/PTFE - 2,0 1.000 548-0871

PP white, closed, for 548-3231 Butyl red/PTFE grey 45° shore A 1,3 1.000 548-0901PP white, closed, for 548-3231 Natural rubber red-orange/TEF transparent 60° shore A 1,3 1.000 548-0899PP white, closed, for 548-3231 Silicone white/PTFE red 45° shore A 1,3 1.000 548-0900


Chrom essentials

Description Pk Cat. No.Manual crimping toolsCrimper for 7,5 mm aluminium caps 1 548-3288Crimper for 8 mm aluminium caps 1 548-0069Crimper for 11 mm aluminium caps 1 548-0071Crimper for 13 mm aluminium caps 1 548-0499Crimper for 13 mm flip tear up seals 1 548-0503Crimper for 13 mm flip-top/flip-off seals 1 548-0500Crimper for 20 mm aluminium caps 1 548-0073Crimper for 20 mm flip tear up seals 1 548-0605Crimper for 20 mm flip-top/flip-off seals 1 548-0602Crimper for 20 mm flip-top/flip-off seals, special 1 548-3349Crimper for 28 mm aluminium caps 1 548-0645Crimper for 28 mm flip-top/flip-off seals 1 548-0643Crimper for 32 mm aluminium caps 1 548-0655Crimper for 32 mm pull off seals 1 548-0888Manual decapping toolsDecapper for 8 mm aluminium caps 1 548-0070Decapper for 11 mm aluminium caps 1 548-0072Decapper for 13 mm aluminium caps 1 548-0504Decapper for 20 mm aluminium caps 1 548-0074Decapper for 28 mm aluminium caps 1 548-0646Decapper for 32 mm aluminium caps 1 548-0658Pneumatic handheld crimping toolsBasic pneumatic crimping tool 1 548-030411 mm crimper, high pressure min. 5 bar/72,5 psi stable working pressure

1 548-1981

11 mm crimper, low pressure min. 3 bar/43,5 psi stable working pressure

1 548-1982

Crimpers and decappersManual crimping tools

• Chemical resistant hardened crimping jaws made of a special alloy• Easy and convenient handling• Adjustable crimping pressure

Additionally 11, 13 and 20 mm crimpers are available with adjustable crimping height.

Pneumatic handheld crimping tools

Crimping and decapping tool operated by compressed air (min. 6,2 bar)

• Easy handling: Just by pushing the button the vial is crimped or decapped• Adjustable and constant crimping pressure• Interchangeable crimping or decapping heads• CE mark of conformity

Space saving installation with balancer (as an option - see ordering table) above the working bench to compensate weight of the crimper. Requires air supply connector with ¼” thread (female). Stand with foot switch also available as an accessory.

Type Hardness Septum Thickness (mm) Pk Cat. No.Septa for Schott GL screw capsFor screw caps Schott GL 14 55° shore A Silicone cream/PTFE beige 3,2 100 548-0480For screw caps Schott GL 18 55° shore A Silicone cream/PTFE beige 3,2 100 548-0532For screw caps Schott GL 25 55° shore A Silicone cream/PTFE beige 3,2 100 548-0633For screw caps Schott GL 32 55° shore A Silicone cream/PTFE beige 3,2 100 548-0654For screw caps Schott GL 45 55° shore A Silicone cream/PTFE beige 3,2 100 548-0662For screw caps Schott GL 45 55° shore A Butyl red/PTFE grey 1,6 1.000 548-3321

Special septa

Description Pk Cat. No.Crimping heads for pneumatic handheld crimping toolsCrimping head for 7,5 mm aluminium caps 1 548-3289Crimping head for 8 mm aluminium caps 1 548-0333Crimping head for 11 mm aluminium caps 1 548-0445Crimping head for 13 mm aluminium caps 1 548-0502Crimping head for 13 mm flip-top/flip-off seals 1 548-0501Crimping head for 20 mm aluminium caps 1 548-0603Crimping head for 20 mm flip tear up seals 1 548-3262Crimping head for 20 mm flip-top/flip-off seals 1 548-0604Crimping head for 28 mm flip tear up seals 1 548-0644Crimping head for 32 mm aluminium caps 1 548-0656Crimping head for 32 mm flip tear up seals 1 548-0657Decapping heads for pneumatic handheld crimping toolsDecapping head for 8 mm aluminium caps 1 548-0334Decapping head for 11 mm aluminium caps 1 548-0446Decapping head for 13 mm aluminium caps 1 548-0505Decapping head for 20 mm aluminium caps 1 548-0606Decapping head for 28 mm aluminium caps 1 548-0647Decapping head for 32 mm aluminium caps 1 548-0659AccessoriesHanging device with balancer 1 548-0305Stand with foot switch 1 548-3286


Description Pk Cat. No.Crimper for 11 mm crimp caps 1 548-1374Crimper for 13 mm crimp caps 1 548-1376Crimper for 20 mm crimp caps 1 548-1378Crimper for 32 mm crimp caps 1 548-1485

Description Pk Cat. No.Cleanroom decappersDecapper for 11 mm crimp caps 1 548-1375Decapper for 13 mm crimp caps 1 548-1377Decapper for 20 mm crimp caps 1 548-1379Decapper for 32 mm crimp caps 1 548-1486

Cleanroom crimping toolsMade entirely of stainless steel for maximum durability during dry heat sterilisation or autoclaving.

• Corrosion and heat resistant, no need for any protective coating on the handle or crimp head

• Withstand repeated sterilisation for cleanroom use without the risk of damage• Adjustable crimping pressure and height

Hole Ø (mm) No. of holes W×D×H (mm) Pk Cat. No.3 - 8,5 50 173×95×20 1 548-013012 50 173×95×20 1 548-013115,1 40 175,8×115,5×20 1 548-019224 25 160×160×30 1 548-0132

Vial racks Rack for chromatography vials

For tubes (ml) No. of holes W×D×H (mm) Pk Cat. No.1,5 50 200×105×17 5 548-13884,0 50 230×117×28 1 548-1520

In clear transparent acrylic

• Easy handling and transportation of sample vials

• Solid construction • Safe storage of conical vials

548-1388

Colour W×D×H (mm) Pk Cat. No.10-place boxes for 30 ml and 40 ml EPA-vialsViolet 130×130×105 1 548-151316-place boxes for 1,5 ml vialsTransparent 67×67×45 1 548-2000Blue 67×67×45 1 548-1995Green 67×67×45 1 548-1999Yellow 67×67×45 1 548-1998Orange 67×67×45 1 548-199616-place boxes for 20 ml EPA-vialsViolet 130×130×102 1 548-151225-place boxes for 5 ml,10 ml and 20 ml headspace-vialsBlue 130×130×102 1 548-151149-place boxes for 4 ml vials or 4 ml shell vialsRed 130×130×52 1 548-148781-place boxes for 1.5 ml (1.8 ml, 2 ml) crimp, snap and screw neck vials (ND8, ND9, ND10, ND11) 2 ml shell vialsTransparent 130×130×45 1 548-1448Blue 130×130×45 1 548-1443Green 130×130×45 1 548-1447Yellow 130×130×45 1 548-1446Orange 130×130×45 1 548-1444Pink 130×130×45 1 548-1445

Storage boxes for sample vials/bottlesPP, coloured

Storage boxes for convenient and safe storage and transportation of sample vials and sample bottles. A selection of boxes is available to securely hold a wide range of vial sizes. Ideal for space saving storage in fridges, as the transparent lid prevents condensations on the closures and thus avoids a possible contamination in the cooling unit.

• Temperature resistant from −80 up to +100 °C• Alphanumeric coding (1,5 ml, 4 ml) for clear sample identification• Chemically resistant and fairly robust, stackable

PP


Chrom essentials

Description Pk Cat. No.96-Position block systems with glass inserts, sealed individuallyDeepwell “riplate”, PP, filled with 0,35 ml micro-insert, 42,5×6 mm, clear glass, 17 mm top, with assembled 9 mm PE cap red, 4 mm centre hole, silicone white/PTFE red, with slit, 45° shore A, 1,9 mm

1 548-0361

Square well “riplate”, PP, filled with 1ml micro-insert, 45,9×7,6 mm, clear glass, round bottom, with assembled 9 mm PE cap red, 4 mm centre hole, silicone white/PTFE red, with slit, 45° shore A, 1,9 mm

1 548-0363

Microtube-rack-system, PP, filled with 0,8 ml micro-insert, 40×7,6 mm, clear glass, U-shaped bottom, with assembled 8 mm PE plug blue 1 548-0362Microtiter-plate, PP, filled with 0,1 ml micro-insert, 15,5×5,7 mm, clear glass, flat bottom, with assembled 9 mm PE cap red, 4 mm centre hole, silicone white/PTFE red, with slit, 45° shore A, 1,9 mm

1 548-0364

Micro-insert, glass, 0,35 ml, 42,5×6 mm, 17 mm top, with assembled 9 mm red PE cap, silicone white/PTFE red, with slit, 45° shore A, 1,9 mm for Deepwell with cap

960 548-0349

Micro-insert, glass, 1 ml, 45,9×7,6 mm, round bottom, with assembled 9 mm red PE cap, silicone white/PTFE red, with slit, 45° shore A, 1,9 mm for square well with cap

960 548-0351

Micro-insert, glass, 0,8 ml, 40×7,6 mm, U-shaped bottom, with assembled 8 mm blue PE plug, for microtube-rack-system with plug 960 548-0350Micro-insert, glass, 0,1 ml, 15,5×5,7 mm, flat bottom, with assembled 9 mm red PE cap, silicone white/PTFE red, with slit, 45° shore A, 1,9 mm for microtiter-plate with cap

960 548-0348

Micro-insert 0,35 ml for Deepwell without cap 960 548-0343Micro-insert 1 ml for square well without cap 960 548-0345Micro-insert 0,8 ml for microtube-rack-system without plug 960 548-0344Micro-insert 0,15 ml for microtiter-plate without cap 960 548-03429 mm PE cap red, 4 mm centre hole, silicone white/PTFE red, with slit 960 548-03768 mm PE plug blue 960 548-033896-Position block systems with glass inserts, sealed individuallyDeepwell block “riplate” 96 positions, PP 1 548-0329Square well block“riplate” 96 positions, PP 1 548-0330Microtube-rack-system 96 positions, PP 1 548-0331Microtiter-plate 96 positions, PP 1 548-033296-Position block systems with glass inserts, sealed with a Sealmat block coverSquare well block “riplate”, PP, filled with 1 ml micro-insert, 45×7,6 mm, clear glass, 8 mm top, covered with Sealmat with welled plugs for easy penetration 1 548-0365Square well block “riplate”, PP, filled with 1 ml micro-insert, 45×7,6 mm, clear glass, 8 mm top, covered with Sealmat with welled plugs and slit for pipettes 1 548-0366Square well block “riplate”, PP, filled with 1 ml micro-insert, 45×7,6 mm, clear glass, 8 mm top, covered with Sealmat with solid plugs for sample storage 1 548-0367Sealmat silicone/PTFE with welled plugs for easy penetration 1 548-0368Sealmat silicone/PTFE with solid plugs for sample storage 1 548-0370Micro-insert 1 ml, 45×7,6 mm, clear glass, 8 mm top 960 548-0346

96-Position block systems96-Position systems (Ritter) with glass inserts are used in HTS (high throughput screening) chemistry when the pure PP block is not inert enough. The inserts can be sealed with a PE cap seal or over the whole block with a Sealmat block cover made of silicone laminated with a PTFE film.

Description ColourRecommended working volume (µl)

Height (mm) Total volume (µl) Pk Cat. No.

Round opening (Ø 7 mm), flat bottom

Clear 10 - 300 14,7 350 10 548-3390

Round opening (Ø 7 mm), round bottom

Clear 10 - 250 14,7 270 10 548-3391

Round opening (Ø 7 mm), conical bottom

Clear 10 - 190 14,7 220 10 548-3392

Deep well, round opening (Ø 7 mm), round bottom

Clear 50 - 900 41,6 1000 5 548-3386

Square opening, conical bottom

Clear 50 - 1900 44,0 2000 5 548-3387

96-well microplates, PP, certified, WebSealPP, non coated, non sterile, chromatography tested and certified

Manufactured from ultra low bleed high purity basis resin and fully lot tested by GC/MS for organic extractables. Designed for sensitive applications, lower sample concentrations, regulated laboratories, and/or TIC and full chromatograms.

• Microplates are chemically and thermally resistant and will tolerate temperatures from −80 °C to +121 °C

• SBS and ANSI standard footprint design for broad instrument compatibility• Ideal for pharmaceutical applications, sample collection and storage, combinatorial

chemistry and HTS applications• U- and V- bottom well format for optimal sample recovery

548-3386


Description Pk Cat. No.AccessoriesWebSeal mat, 96 round well shape with flat base, Ø 7 mm 5 548-3399WebSeal mat, 96 round well shape with flat base, Ø 7 mm, pre-slit 5 548-3400WebSeal mat, 96 square well shape 5 548-3404WebSeal mat, 96 square well shape, pre-slit 5 548-3406Sealmat (block cover), 96 round well shape with flat base, Ø 7 mm, pre-slit 5 548-3401Sealmat (block cover), 96 square well shape, pre-slit 5 548-3407Sealmat (block cover), 96 round well shape with flat base, Ø 7 mm 5 548-3415

Description Recommended working volume (µl) Height (mm) Total volume (µl) Pk Cat. No.Square opening, round bottom 2 - 35 14,4 58 10 548-3388Square opening, conical bottom 5 - 240 30,2 300 6 548-3389

384-well microplates, PP, certified, WebSealPP, non coated, non sterile, chromatography tested and certified

Manufactured from ultra low bleed high purity basis resin and fully lot tested by GC/MS for organic extractables. Designed for sensitive applications, lower sample concentrations, regulated laboratories, and/or TIC and full chromatograms.

• Microplates are chemically and thermally resistant and will tolerate temperatures from −80 °C to +121 °C

• SBS and ANSI standard footprint design for broad instrument compatibility• Ideal for pharmaceutical applications, sample collection and storage, combinatorial

chemistry and HTS applications• U- and V- bottom well format for optimal sample recovery

Description Material Pk Cat. No.AccessoriesWebSeal mat, 384 square well shape PTFE/Silicone 5 548-3408WebSeal mat, 384 square well shape, pre-slit PTFE/Silicone 5 548-3410Sealmat (block cover), 384 square well shape Silicone 5 548-3409Sealmat (block cover), 384 square well shape, pre-slit Silicone 5 548-3416

Description Total height (mm) Well volume (µl) Recommended working volume (µl) Pk Cat. No.Round opening (Ø 7 mm), conical bottom 14,6 220 190 10 548-3380Round opening (Ø 7 mm), flat bottom 14,6 370 300 10 548-3381Round opening (Ø 7 mm), conical bottom 41,5 1200 1000 10 548-3382Square opening (Ø 7 mm), conical bottom 44 2400 2000 10 548-3383Round opening (Ø 7 mm), round bottom 14,6 300 250 10 548-3393

Description Colour Material Pk Cat. No.AccessoriesWebSeal mat, 96 round well shape with flat base, Ø 7 mm Blue PTFE/Silicone 5 548-3399WebSeal mat, 96 round well shape with flat base, Ø 7 mm, pre-slit Blue PTFE/Silicone 5 548-3400WebSeal mat, 96 square well shape Blue PTFE/Silicone 5 548-3404WebSeal mat, 96 square well shape, pre-slit Blue PTFE/Silicone 5 548-3406Sealmat (block cover), 96 round well shape with flat base, Ø 7 mm, pre-slit Clear Silicone 5 548-3401Sealmat (block cover), 96 square well shape Clear Silicone 5 548-3405Sealmat (block cover), 96 square well shape, pre-slit Clear Silicone 5 548-3407Sealmat (block cover), 96 round well shape with flat base, Ø 7 mm Clear Silicone 5 548-3415

Microplates, glass coated, 96-well, WebSeal Plate+High quality polypropylene microplates coated with 200 nm thick layer of silicone dioxide.

• Plate+ provides microplates with a chemical resistance similar to glass while retaining the advantages of polypropylene

• Eliminates the need to use glass limited volume inserts• Excellent for applications where plastic microplates are not applicable• Plate+ is chemically and thermally resistant and will tolerate temperatures from −80

°C to +80 °C• Lightweight, precision moulded, cost effective alternative to solid glass plates

Other WebSeal products are available. Please contact your local VWR Office for further details.

548-3381


Chrom essentials

Description Total height (mm) Well volume (µl) Recommended working volume (µl) Pk Cat. No.Square opening, square well shape 14,4 120 90 10 548-3384Square opening, square well shape 22,0 240 180 6 548-3385

Description Colour Material Pk Cat. No.AccessoriesWebSeal mat, 384 square well shape Blue PTFE/Silicone 5 548-3408WebSeal mat, 384 square well shape, pre-slit Blue PTFE/Silicone 5 548-3410Sealmat (block cover), 384 square well shape Clear Silicone 5 548-3409Sealmat (block cover), 384 square well shape, pre-slit Clear Silicone 5 548-3416

Microplates, glass coated, 384-well, WebSeal Plate+High quality polypropylene microplates coated with 200 nm thick layer of silicone dioxide.

• Plate+ provides microplates with a chemical resistance similar to glass while retaining the advantages of polypropylene

• Eliminates the need to use glass limited volume inserts• Excellent for applications where plastic microplates are not applicable• Plate+ is chemically and thermally resistant and will tolerate temperatures from −80

°C to +80 °C• Lightweight, precision moulded, cost effective alternative to solid glass plates

Other WebSeal products are available. Please contact your local VWR Office for further details.

Description Temp. range (°C) Pk Cat. No.Plate sealing tape, PE/silicone, clear −40...+90 100 548-3411Plate sealing tape, PES/silicone, clear −70...+100 100 548-3412Plate sealing tape, aluminium/silicone, silver –80...+120 100 548-3413Plate sealing tape with synthetic rubber adhesive, polyolefin/rubber, clear

- 100 548-3417

Plate sealing tape with 3 layers, no adhesive at cavity area, PET/silicone/PET, clear

- 100 548-3418

Sealing tapes for WebSeal plates

Pore size (µm) Ø (mm) Sterile Pk Cat. No.PP membrane0,2 25 - 100 514-00640,45 25 - 100 514-0065PTFE membrane0,2 13 - 100 514-00680,2 25 - 100 514-00700,45 13 - 100 514-00690,45 25 - 100 514-0071Nylon membrane0,2 25 - 100 514-00660,45 25 - 100 514-0067

PP membraneThese polyvalent filters are designed for the preparation of mixed samples.

They fulfil a broad range of chemical compatibility for aqueous/organic mixtures.

PTFE membraneThese PTFE membranes are designed for filtration of corrosive gases and organic solvents.

Excellent chemical resistance.Ultimate compatibility for filtering harsh chemicals.

Nylon membraneThese versatile filters are suitable for the preparation of aqueous and solvent-based samples.

Chemical compatibility with esters, bases and alcohols.Offers a broad chemical resistance to common solvents. Not recommended for acids >1N or halogenated solvents.

Syringe filtersAvailable with either PP, PTFE or nylon membrane. Membranes are available in either 0,2 or 0,45 µm pore size with the choice often made on analytical column packing size. If the column packing size is larger than 3 μm then use 0,45 μm and if 3 μm or smaller then use 0,2 μm.

• Suitable for HPLC: Low levels of UV-detectable extractables


Gas-tight micro syringesMicro syringes without needle

General purpose Luer lock connector for use with autosamplers and liquid handling instruments.

All parts in contact with sample are made from neutral borosilicate glass and PTFE. This provides excellent performance and an inert sample environment.

Ordering information: Needles must be ordered separately.

Interchangeable needles

549-0560 made from SUS304; 549-0565 made form chrome plated brass

549-0560 needles for 1, 2,5, 5 and 10 ml gas-tight syringes. 549-0565 needles for 0,1 ml gas-tight syringes.

PTFE tips

Provides a complete leak-tight seal for both liquids and gases.

549-0539 549-0559

Description Volume (ml) Length (mm) Type of tip For Pk Cat. No.Micro syringes without needleGas-tight micro syringe 1 1 549-0536Gas-tight micro syringe 2,5 1 549-0537Gas-tight micro syringe 5 1 549-0538Gas-tight micro syringe 10 1 549-0539Micro syringe with interchangeable needleGas-tight micro syringe 0,10 50 Bevelled 1 549-0559PTFE tipsPTFE tips 1 ml micro syringe 5 549-0561PTFE tips 2,5 ml micro syringe 5 549-0562PTFE tips 5 ml micro syringe 5 549-0563PTFE tips 10 ml micro syringe 5 549-0564

Description Gauge Length (mm) Ø ext. (mm) Ø int. (mm) Type of tip Pk Cat. No.Interchangeable needlesLuer lock with PTFE seal 24 50 0,56 0,30 Bevelled 5 549-0560Interchangeable without PTFE seal - 50 0,52 0,18 Bevelled 5 549-0565

Description Volume (µl) Length (mm) Type of tip Pk Cat. No.Standard micro syringe 10 50 Bevelled 1 549-0199Standard micro syringe 25 50 Bevelled 1 549-0522Standard micro syringe 50 50 Bevelled 1 549-0523Standard micro syringe 100 50 Bevelled 1 549-0524

Length in ordering table refers to needle length.

Standard micro syringesStandard micro syringes for GC with fixed needle.

• All parts in contact with liquid are made of stainless steel and neutral borosilicate glass


Chrom essentials

HPLC micro syringes, RheodyneThe fine fixed needle with special polished blunt tip, specific length and diameter ensures a complete seal, preventing damage to needle seals and rotor.Volume (µl) Length (mm) Type of tip Pk Cat. No.10 * 51 LC 1 549-0534100 51 LC 1 549-0535

* with super flexible plungerLength in ordering table refers to needle length.

Volume (µl) Length (mm) Type of tip Pk Cat. No.1 50 Bevelled 1 549-01975 75 Bevelled 1 549-0198

Length in ordering table refers to needle length.

Micro syringe ultra-minute volumeMicro syringe with fixed needle for high sensitivity GC analysis and ultra-minute volume.

• Zero dead volume between plunger and needle• Fixed needle with bevelled tip for smooth septum penetration

Gauge Volume (µl) Length (mm) Type of tip Pk Cat. No.23 5 43 AS 1 549-056623 10 43 AS 1 549-056723 10 * 43 AS 1 549-0568

* with super flexible plungerLength in ordering table refers to needle length.

Microsyringes for GC autosampler Agilent 7673A


Description Pk Cat. No.Water purification system, Puranity PU 15 Basic 1 171-1100Water purification system, Puranity PU 15 UV (with UV lamp) 1 171-1102Water purification system, Puranity PU 15 UV/UF (with UV lamp and ultrafilter) 1 171-1101Water purification system, Puranity PU 20 Basic 1 171-1172Water purification system, Puranity PU 20 UV (with UV lamp) 1 171-1174Water purification system, Puranity PU 20 UV/UF (with UV lamp and ultrafilter) 1 171-1173

Description Pk Cat. No.CartridgesPolisher cartridge for PU 15 1 171-1104Polisher cartridge for PU 20 1 171-1175Disinfection cartridge PU 20 (all models) 1 171-1182Disinfection cartridge PU 15 (all models) 1 171-1183Cleaning solution, 1 syringe (disinfection cartridge required), for Puranity PU 1 171-1124AccessoriesElectronic water watcher; alerts the user to leaks. Available as 230V, 50Hz only. 1 171-1126Replacement UV lamp for PU 20 UV and UV/UF models 1 171-1176Replacement UV lamp for PU 15 UV and UV/UF models 1 171-1108Sterile filter 0,2 µm 1 171-1105System wall mount bracket for PU and TU models 1 171-1125Ultrafilter for PU 20 UV/UF models 1 171-1184Ultrafilter for PU 15 UV/UF models 1 171-1106

Model Puranity PU 15 Puranity PU 15 UV Puranity PU 15 UV/UF Puranity PU 20 Puranity PU 20 UV Puranity PU 20 UV/UFAverage daily needs 50 l 200 lFeed water Pretreated tap water by RO, ion exchange or distillationFlow rate (l/min) max. 1,5 max. 2Conductivity (µS/cm) 0,055Max. operating pressure (bar)

2 - 6 0,1 - 6

TOC content5 - 10 ppb

1 - 5 ppb with UV lampResistivity at +25 °C 18,2 MΏ.cmBacteria <1 (CFU/ml)Particles <1 (0,22 µm/ml)Endotoxins

-<0,001 EU/ml

-<0,001 EU/ml

RNases <0,003 ng/ml <0,003 ng/mlDNases <0,4 pg/μl <0,4 pg/μlPower consumption (kW) 0,06W×D×H (mm) 305×300×545 370×330×615

Water purification systems, Puranity PU Produce up to 200 litres/day of Type I ultrapure water from pretreated feed water

There are areas in which particularly high demands are placed on the water quality: Chemical organic or inorganic trace analysis, for example, for TOC measurements and instrumental methods such as HPLC, ICP-MS and IC. The demands are even higher in the life sciences. Freedom from endotoxins and nucleases is a necessity when preparing, or working with, tissue and cell culture media, PCR, DNA, or monoclonal antibodies. The PU basic, UV and UV/UF versions have already convincingly demonstrated the benefits of the new system control and the high-precision, USP-complying conductivity measurement with temperature compensation that can be switched on or off.

• Compact system and smart design, easy to maintain• Feed water monitoring• Variable flow dispensing• Deionisation cartridges are easy to change without depressurising the system• Backlit display tilts for easy viewing• RS232 interface with adjustable send interval for safe data transfer of all measured

data, faults, date and time to a PC computer or log printer

Delivery information: All Puranity PU systems include a DI cartridge pack, 0,2 μm final filter, pressure reducer, feed water monitoring, UV lamp (for UV systems only) and ultrafilter (for UF systems only)


Chrom essentials

Description Pk Cat. No.Water purification system, Puranity TU 3 Basic 1 171-1134Water purification system, Puranity TU 3 UV with UV lamp 1 171-1135Water purification system, Puranity TU 3 UV/UF with UV lamp and ultrafilter 1 171-1136Water purification system, Puranity TU 6 Basic 1 171-1137Water purification system, Puranity TU 6 UV with UV lamp 1 171-1138Water purification system, Puranity TU 6 UV/UF with UV lamp and ultrafilter 1 171-1139Water purification system, Puranity TU 12 Basic 1 171-1162Water purification system, Puranity TU 12 UV with UV lamp 1 171-1163Water purification system, Puranity TU 12 UV/UF with UV lamp and ultrafilter 1 171-1164

Model Puranity TU 3Puranity TU

3 UVPuranity TU 3

UV/UFPuranity TU 6

Puranity TU 6 UV

Puranity TU 6 UV/UF

Puranity TU 12 Puranity TU

12 UVPuranity TU 12

UV/UFFeed water Potable (tap) water acc. to DIN 2000Flow rate (l/min) max. 1,0*Conductivity (µS/cm) 0,055 (ASTM II: 0,067 − 0,1)*Max. operating pressure (bar) 1 - 6

TOC content5 - 10 ppb*

1 - 5 ppb with UV lamp*Resistivity at +25 °C 18,2 MΏ.cmBacteria <1 (CFU/ml)*Particles <1 (0,2 µm/ml)*Endotoxins

-<0,001 EU/ml

-<0,001 EU/ml

-<0,001 EU/ml

RNases <0,003 ng/ml <0,003 ng/ml <0,003 ng/mlDNases <0,4 pg/μl <0,4 pg/μl <0,4 pg/μlPower consumption (kW) 0,06W×D×H (mm) 330×370×615Weight (kg) 22

Water purification systems, Puranity TU Puranity TU 3, 6 and 12 systems produce up to 100 litres/day of Type I ultrapure water from tap water, as well as Type II water available from the tank

For converting potable tap water to ultrapure water of ASTM Types I and II.

Water purification progresses through independent cartridges with Aquastop quick-connect for fast replacement. - Module 1 - Combination of pretreatment and the reverse osmosis membrane- Module 2 - Polishing cartridge contains high-quality ultrapure resin for consistent purity and long cartridge life

• Dispensing is easy and features variable speed to control flow• The display can be tilted for optimal reading• Placement options: Can be placed on a laboratory bench or mounted on the wall• Deionisation cartridges are easy to change without depressurising the system• Easy to maintain• Large opening for easy and effective cleaning by hand• Sterile venting filter/reservoir overflow protects against contamination by

microorganisms

Delivery information: Puranity TU 3,6, and 12 systems include a RO/pretreatment cartridge, DI cartridge pack, 0,2 μm final filter, pressure reducer, feed water monitoring, UV bulb (for UV systems only) and ultrafilter (for UF systems only). The 3 and 6 litres/hr systems also include an internal 6 l tank with vent filter. The TU 12 requires an external tank. Please contact your local VWR sales office to discuss your requirements before making your selection as different areas of the country may require additional pretreatment option.

Description Pk Cat. No.CartridgesPolisher cartridge for TU systems 1 171-1141Pretreatment + RO cartridges for Puranity TU 3 1 171-1142Pretreatment + RO cartridges for Puranity TU 6 1 171-1143Pretreatment + RO cartridges for Puranity TU 12 1 171-1165AccessoriesAccessory dispenser kit for dispensing type II water 1 171-1181Assembly kit for Puranity TU 12 1 171-1185Assembly kit for Puranity TU 6 1 171-1140Electronic water watcher; alerts the user to leaks. Available as 230V, 50Hz only. 1 171-1126Printer 1 171-1160Replacement UV lamp for external storage tanks, for Puranity ultrapure water systems, TU 12 1 171-1168Replacement UV lamp for PU 15 UV and UV/UF models 1 171-1108Sterile filter 0,2 µm 1 171-1105


Description Connector Pk Cat. No.Safety caps standardSafety cap, GL 45 1× for tubing 3,2 mm (1/8“) OD 1 590-1501Safety cap, GL 45 2× for tubing 3,2 mm (1/8“) OD 1 590-1507Safety cap, GL 45 3× for tubing 3,2 mm (1/8“) OD 1 590-1508Safety caps with shut-off functionSafety cap, GL 45 1× for tubing 3,2 mm (1/8“) OD 1 590-1502Safety cap, GL 45 2× for tubing 3,2 mm (1/8“) OD 1 590-1514Safety cap, GL 45 3× for tubing 3,2 mm (1/8“) OD 1 590-1515AccessoriesAir valve for safety caps 1 590-1500PP fitting for 1,6, 2,3 and 3,2 mm OD tubing 10 590-1503PTFE ferrules for fitting 1,6 mm 10 590-1504PTFE ferrules for fitting 2,3 mm 10 590-1505PTFE ferrules for fitting 3,2 mm 10 590-1506Air filter for air valve 10 590-1519

Safety capsExtract the solvents or mobile phases safely from reservoirs and bottles, without being exposed to hazardous gases and solvent vapours. High quality materials (PTFE and PP) ensure maximum safety for your laboratory staff and environment.

• Recommended for HPLC systems• Chemically resistant against aggressive organic solvents

Air filter and valves should be changed every six month for maximum safety.590-1501 / 590-1507 / 590-1508

Description Connector Pk Cat. No.Safety waste caps, standardSafety waste cap, GL 45 3× for tubing 2,3/3,2 mm (1/8“) OD 1 590-1510Safety waste cap, S 55 3× for tubing 2,3/3,2 mm (1/8“) OD 1 590-1512Safety waste cap, S 60/61 3× for tubing 2,3/3,2 mm (1/8“) OD 1 590-1513Safety waste caps with tube connectionsSafety waste cap, GL 45 2× for tubing 2,3/3,2 mm (1/8“) OD + 1× for tubing 6,4 mm ID 1 590-1516Safety waste cap, S 55 2× for tubing 2,3/3,2 mm (1/8“) OD + 1× for tubing 6,4 mm ID 1 590-1517Safety waste cap, S 60/61 2× for tubing 2,3/3,2 mm (1/8“) OD + 1× for tubing 6,4 mm ID 1 590-1518AccessoriesExhaust filter S for safety waste caps, ±30000 m² filtering surface (for container <5 l) 1 590-1509Exhaust filter M for safety waste caps, ±60000 m² filtering surface (for container <20 l) 1 590-1511

Safety waste capsCollect your solvent waste safely without being exposed to solvent vapours or hazardous gases. High quality materials (PTFE, PP) ensure maximum safety for your laboratory staff and environment.

• Recommended for HPLC systems• Chemically resistant against aggressive organic solvents

Safety waste caps with tube connections

Tubing connector for e.g. leak connection of HPLC instruments.

Delivery information: Fittings and ferrules for tubing with 2,3 and 3,2 mm (1/8”) OD are included. Exhaust air filter has to be ordered separately. Bottle not included.590-1510 / 590-1516 / 590-1509 / 590-1511

Description Pk Cat. No.AccessoriesSterile vent filter external storage tank 30-100 litres 1 171-1166Storage tank 30 liter for Puranity TU 12 models 1 171-1170Storage tank 60 liter for Puranity TU 12 models 1 171-1171System wall mount bracket for PU and TU models 1 171-1125Ultrafilter for UV/UF models 1 171-1106Venting filter 0,2 µm for internal tank 1 171-1144

* Type I water

The shut-off on the safety caps can be closed to keep capillaries and inlet filters in the solvent during HPLC pump maintenance and ensure that the frits are not in contact with the ambient air. The pump can then be quickly and easily flushed during purging. Safety caps with shut-off also prevent air ingress into the tubing during solvent changes and guarantees that the analysis continues without a problem.

Delivery information: Supplied with an air valve/filter and corresponding fitting.



Description Pk Cat. No.1,4-Dioxane HiPerSolv CHROMANORM® for HPLC 2,5 l 83628.3201-Chlorobutane HiPerSolv CHROMANORM® for HPLC 2,5 l 83631.3202,2,4-Trimethylpentane HiPerSolv CHROMANORM® for HPLC 1 l 83630.2902,2,4-Trimethylpentane HiPerSolv CHROMANORM® for HPLC 2,5 l 83630.320Acetone HiPerSolv CHROMANORM® for HPLC 1 l 20067.290Acetone HiPerSolv CHROMANORM® for HPLC 2,5 l 20067.320Acetonitrile HiPerSolv CHROMANORM® ACS, Reag. Ph. Eur., super gradient grade for HPLC 1 l 83639.290Acetonitrile HiPerSolv CHROMANORM® ACS, Reag. Ph. Eur., super gradient grade for HPLC 2,5 l 83639.320Acetonitrile HiPerSolv CHROMANORM® ACS, Reag. Ph. Eur., super gradient grade for HPLC 5 l 83639.360Acetonitrile HiPerSolv CHROMANORM® ACS, Reag. Ph. Eur., super gradient grade for HPLC 4 l 83639.400Acetonitrile HiPerSolv CHROMANORM® ACS, Reag. Ph. Eur., super gradient grade for HPLC 10 l 83639.910Acetonitrile HiPerSolv CHROMANORM® ACS, Reag. Ph. Eur., super gradient grade for HPLC 28 l 83639.928Acetonitrile HiPerSolv CHROMANORM® gradient grade for HPLC 1 l 20060.290Acetonitrile HiPerSolv CHROMANORM® gradient grade for HPLC 2,5 l 20060.320Acetonitrile HiPerSolv CHROMANORM® gradient grade for HPLC 4 l 20060.350Acetonitrile HiPerSolv CHROMANORM® gradient grade for HPLC 5 l 20060.360Acetonitrile HiPerSolv CHROMANORM® gradient grade for HPLC 2,5 l 20060.420Acetonitrile HiPerSolv CHROMANORM® isocratic grade for HPLC 1 l 20048.290Acetonitrile HiPerSolv CHROMANORM® isocratic grade for HPLC 2,5 l 20048.320Acetonitrile HiPerSolv CHROMANORM® isocratic grade for HPLC 5 l 20048.360Acetonitrile HiPerSolv CHROMANORM® isocratic grade for HPLC 2,5 l 20048.420Butan-1-ol HiPerSolv CHROMANORM® for HPLC 1 l 83633.290Chloroform, stabilised with EtOH, HiPerSolv CHROMANORM® for HPLC 1 l 83627.290Chloroform, stabilised with EtOH, HiPerSolv CHROMANORM® for HPLC 2,5 l 83627.320Chloroform stabilised with 2-methyl-2-butene, HiPerSolv CHROMANORM® for HPLC 1 l 83626.290Chloroform stabilised with 2-methyl-2-butene, HiPerSolv CHROMANORM® for HPLC 2,5 l 83626.320Cyclohexane HiPerSolv CHROMANORM® for HPLC 1 l 83629.290Cyclohexane HiPerSolv CHROMANORM® for HPLC 2,5 l 83629.320Dichloromethane HiPerSolv CHROMANORM® for HPLC (stabilised with ±0,002% 2-methyl-2-butene) 1 l 23373.290Dichloromethane HiPerSolv CHROMANORM® for HPLC (stabilised with ±0,002% 2-methyl-2-butene) 2,5 l 23373.320Dichloromethane HiPerSolv CHROMANORM® for HPLC (stabilised with ±0,002% 2-methyl-2-butene) 4 l 23373.400Dichloromethane HiPerSolv CHROMANORM® for HPLC (stabilised with ±0,1% ethanol) 1 l 83623.290Dichloromethane HiPerSolv CHROMANORM® for HPLC (stabilised with ±0,1% ethanol) 2,5 l 83623.320Diethyl ether HiPerSolv CHROMANORM® for HPLC 2,5 l 83624.320Dimethylformamide HiPerSolv CHROMANORM® for HPLC 2,5 l 152976REthanol 95 - 97% (v/v) HiPerSolv CHROMANORM® for reversed phase polarity HPLC 2,5 l 20825.324Ethanol 95 - 97% (v/v) HiPerSolv CHROMANORM® for reversed-phase polarity HPLC 1 l 20825.290Ethanol absolute 99,7 - 100% v/v, HiPerSolv CHROMANORM® for HPLC 1 l 153385EEthanol absolute 99,7 - 100% v/v, HiPerSolv CHROMANORM® for HPLC 2,5 l 153386FEthyl acetate HiPerSolv CHROMANORM® for HPLC 1 l 83621.290Ethyl acetate HiPerSolv CHROMANORM® for HPLC 2,5 l 83621.320Isohexane (mixture of isomers) HiPerSolv CHROMANORM® for HPLC 2,5 l 83622.320Methanol HiPerSolv CHROMANORM® for HPLC 2,5 l 152506XMethanol HiPerSolv CHROMANORM® for HPLC 2,5 l 152507PMethanol HiPerSolv CHROMANORM® gradient grade for HPLC 1 l 20864.290Methanol HiPerSolv CHROMANORM® gradient grade for HPLC 2,5 l 20864.320Methanol HiPerSolv CHROMANORM® gradient grade for HPLC 5 l 20864.360Methanol HiPerSolv CHROMANORM® gradient grade for HPLC 4 l 20864.400Methanol HiPerSolv CHROMANORM® gradient grade for HPLC 2,5 l 20864.420Methanol HiPerSolv CHROMANORM® gradient grade for HPLC 10 l 20864.910Methanol HiPerSolv CHROMANORM® gradient grade for HPLC 28 l 20864.928Methanol HiPerSolv CHROMANORM® isocratic grade for HPLC 1 l 20837.290Methanol HiPerSolv CHROMANORM® isocratic grade for HPLC 2,5 l 20837.320Methanol HiPerSolv CHROMANORM® isocratic grade for HPLC 5 l 20837.360Methyl ethyl ketone HiPerSolv CHROMANORM® for HPLC 1 l 25643.294Methyl ethyl ketone HiPerSolv CHROMANORM® for HPLC 2,5 l 25643.328

Solvents, HiPerSolv CHROMANORM® for HPLC applicationsAn extensive range of high purity solvents for HPLC applications, filtered at 0,2 μm and bottled under nitrogen. Specified to meet the demanding requirements of HPLC and LC-UV applications.

• High UV transmission• Gradient test at 210, 235 and 254 nm• Low residue on evaporation• Excellent batch to batch reproducibility• Suitable for UPLC and UHPLC for some solvents (water and acetonitrile gradient

grade)• Larger pack sizes available for some solvents, 4 litre glass bottle or 5 litre aluminium

cans


Description Pk Cat. No.N,N-Dimethylacetamide HiPerSolv CHROMANORM® for HPLC 4 l 83636.350N,N-Dimethylformamide HiPerSolv CHROMANORM® for HPLC 2,5 l 83634.320n-Heptane HiPerSolv CHROMANORM® for HPLC 1 l 24539.290n-Heptane HiPerSolv CHROMANORM® for HPLC 2,5 l 24539.320n-Hexane HiPerSolv CHROMANORM® for HPLC 1 l 24575.290n-Hexane HiPerSolv CHROMANORM® for HPLC 2,5 l 24575.320n-Hexane HiPerSolv CHROMANORM® for HPLC 4 l 24575.400n-Pentane 99% HiPerSolv CHROMANORM® for HPLC 2,5 l 83632.320Propan-1-ol HiPerSolv CHROMANORM® for HPLC 2,5 l 83635.320Propan-2-ol HiPerSolv CHROMANORM® for HPLC 1 l 20880.290Propan-2-ol HiPerSolv CHROMANORM® for HPLC 2,5 l 20880.320tert-Butyl methyl ether HiPerSolv CHROMANORM® for HPLC 1 l 22105.295Tetrahydrofuran HiPerSolv CHROMANORM® for HPLC 1 l 28559.290Tetrahydrofuran HiPerSolv CHROMANORM® for HPLC 2,5 l 28559.320Toluene HiPerSolv CHROMANORM® for HPLC 1 l 83625.290Toluene HiPerSolv CHROMANORM® for HPLC 2,5 l 83625.320Toluene HiPerSolv CHROMANORM® for HPLC 4 l 83625.400Triethylamine HiPerSolv CHROMANORM® for HPLC 100 ml 28757.184Triethylamine HiPerSolv CHROMANORM® for HPLC 250 ml 28757.230Water HiPerSolv CHROMANORM®, super gradient grade for HPLC, suitable for UPLC/UHPLC instruments 1 l 83650.290Water HiPerSolv CHROMANORM®, super gradient grade for HPLC, suitable for UPLC/UHPLC instruments 2,5 l 83650.320Water HiPerSolv CHROMANORM® for HPLC 1 l 23595.294Water HiPerSolv CHROMANORM® for HPLC 2,5 l 23595.328Water HiPerSolv CHROMANORM® for HPLC 4 l 23595.400Water HiPerSolv CHROMANORM® for HPLC 25 l 23595.465

Description Pk Cat. No.Acetonitrile HiPerSolv CHROMANORM® for LC-MS 1 l 83640.290Acetonitrile HiPerSolv CHROMANORM® for LC-MS 2,5 l 83640.320Methanol HiPerSolv CHROMANORM® for LC-MS 1 l 83638.290Methanol HiPerSolv CHROMANORM® for LC-MS 2,5 l 83638.320Propan-2-ol HiPerSolv CHROMANORM® for LC-MS 1 l 84881.290Propan-2-ol HiPerSolv CHROMANORM® for LC-MS 2,5 l 84881.320Tetrahydrofuran HiPerSolv CHROMANORM® for LC-MS 1 l 84882.290Tetrahydrofuran HiPerSolv CHROMANORM® for LC-MS 2,5 l 84882.320Water HiPerSolv CHROMANORM® for LC-MS 1 l 83645.290Water HiPerSolv CHROMANORM® for LC-MS 2,5 l 83645.320

Solvents for LC-MS, HiPerSolv CHROMANORM®This grade of solvents offers customers quality products, specifically manufactured to meet the needs of LC-MS instruments.

Designed to ensure minimal metal adduct formation through rigorous testing for the presence of alkaline impurities, the solvents combine high performance and stable baseline of HPLC solvents with the absence of extraneous peaks, as detected by GC-ECD.

• High UV transmission• Gradient test at 210, 235 or 254 nm• Low alkaline metal content of max. 0,1 ppm (below 50 ppb for acetonitrile and

water)• Filtered at 0,2 μm and bottled under nitrogen• Standard glass bottles fitted with DIN 45 closures with PTFE liners to prevent

contamination



Description Pk Cat. No.Acetic acid 0,1% in acetonitrile, HiPerSolv CHROMANORM® for LC-MS 1 l 84872.290Acetic acid 0,1% in acetonitrile, HiPerSolv CHROMANORM® for LC-MS 2,5 l 84872.320Acetic acid 0,1% in water, HiPerSolv CHROMANORM® for LC-MS 1 l 84873.290Acetic acid 0,1% in water, HiPerSolv CHROMANORM® for LC-MS 2,5 l 84873.320Formic acid 0,1% in acetonitrile, HiPerSolv CHROMANORM® for LC-MS 1 l 84866.290Formic acid 0,1% in acetonitrile, HiPerSolv CHROMANORM® for LC-MS 2,5 l 84866.320Formic acid 0,1% in water, HiPerSolv CHROMANORM® for LC-MS 1 l 84867.290Formic acid 0,1% in water, HiPerSolv CHROMANORM® for LC-MS 2,5 l 84867.320Trifluoroacetic acid 0,1% in acetonitrile, HiPerSolv CHROMANORM® for LC-MS 1 l 84869.290Trifluoroacetic acid 0,1% in acetonitrile, HiPerSolv CHROMANORM® for LC-MS 2,5 l 84869.320Trifluoroacetic acid 0,1% in methanol, HiPerSolv CHROMANORM® for LC-MS 1 l 84870.290Trifluoroacetic acid 0,1% in methanol, HiPerSolv CHROMANORM® for LC-MS 2,5 l 84870.320Trifluoroacetic acid 0,1% in water, HiPerSolv CHROMANORM® for LC-MS 1 l 84871.290Trifluoroacetic acid 0,1% in water, HiPerSolv CHROMANORM® for LC-MS 2,5 l 84871.320

LC-MS grade mixes for HPLC, HiPerSolv® CHROMANORM®Pre-blended solutions of the most commonly used LC-MS mobile phases, prepared with precision and very high quality components to minimise baseline noise and analysis artefacts. Such precisely blended solvents eliminate time-consuming mobile phase preparation and eliminate lost sample preparation and instrument downtime caused by impure mobile phases. A special formulation ensures that no precipitation or decomposition of the additive occurs under normal labs conditions.

• Time saving• Accurate composition• Minimised baseline and artifacts• Assurance of high quality

Mini solvent pump for high purity solvents and drum pumps are available in chapter Preparative and flash HPLC.

Description Pk Cat. No.Residual solvent standard recommended by Ph. Eur./ICH Class I 1 Ampoul 88206.001Residual solvent standard recommended by Ph. Eur./ICH Class I 1,5 ml 88206.015Residual solvent standard recommended by Ph. Eur./ICH Class IIa 1 Ampoul 88207.001Residual solvent standard recommended by Ph. Eur./ICH Class IIa 1,5 ml 88207.015Residual solvent standard recommended by Ph. Eur./ICH Class IIb 1 Ampoul 88208.001Residual solvent standard recommended by Ph. Eur./ICH Class IIb 1,5 ml 88208.015Residual solvent standard recommended by Ph. Eur./ICH Class IIc 1 Ampoul 88209.001Residual solvent standard recommended by Ph. Eur./ICH Class IIc 1,5 ml 88209.015

Residual solvents standardsIn the pharmaceutical industry, to measure residual solvents in raw material or finished product, you need to follow the ICH guidelines establishing a classification of residual solvents by risk assessment ( Class 1, Class 2 or Class 3 ). Now, a residual solvent standards range is available from VWR.

• Conforms to the last Ph. Eur. edition• Conforms to ICH guidelines• Delivered with comprehensive C of A (certificates of analysis)

for all batches• Packed in 1 ml or 1,5 ml glass ampoules


Mobile phase additives for HPLC and LC-MSAdditives are selective chemicals that are commonly added to the mobile phase or introduced post column prior to the interface to influence analyte ionisation. The objective is usually to improve the signal quality, but they can also be used to suppress unwanted signals or selectively enhance the signal of specific compounds in a mixture.

Additives are useful because many chromatography separations benefit, in terms of retention and/or peak shape, under acidic conditions since any silanol activity is suppressed.

LC-MS additives

Most MS measurements are done in positive ion mode, which is accomplished by the addition of a proton to form the molecular ion. The low molecular weight organic acids additives exhibit the necessary acidity and volatility to provide an excess of cations for this purpose. Neutral volatile salts such as ammonium acetate or ammonium formate can influence the separation and ionisation of analytes like acids. They are useful for LC-MS separations in neutral conditions, when, for example, analytes are sensitive to acids or don’t present optimal resolution at low pH.

Description Pk Cat. No.HPLC additivesAcetic acid glacial for HPLC 250 ml 20108.230Acetic acid glacial for HPLC 1 l 20108.292Ammonia 32% HiPerSolv CHROMANORM® for HPLC 100 ml 153312K1-Heptanesulphonic acid sodium salt HiPerSolv CHROMANORM® for HPLC 25 g 152782J1-Heptanesulphonic acid sodium salt HiPerSolv CHROMANORM® for HPLC 100 g 152783K1-Hexanesulphonic acid sodium salt HiPerSolv CHROMANORM® for HPLC 25 g 152792L1-Hexanesulphonic acid sodium salt HiPerSolv CHROMANORM® for HPLC 100 g 152793M1-Octanesulphonic acid sodium salt HiPerSolv CHROMANORM® for HPLC 25 g 152802T1-Octanesulphonic acid sodium salt HiPerSolv CHROMANORM® for HPLC 100 g 152803U1-Pentanesulphonic acid sodium salt HiPerSolv CHROMANORM® for HPLC 25 g 152812V1-Pentanesulphonic acid sodium salt HiPerSolv CHROMANORM® for HPLC 100 g 152813WPotassium dihydrogen phosphate HiPerSolv CHROMANORM® for HPLC 500 g 153184USodium chloride HiPerSolv CHROMANORM® for HPLC 500 g 153274VSodium perchlorate monohydrate HiPerSolv CHROMANORM® for HPLC 250 g 153233MTrifluoroacetic acid 100% HiPerSolv CHROMANORM® for HPLC 100 ml 153112ELC-MS additivesAcetic acid 99%, HiPerSolv CHROMANORM® for LC-MS 100 ml 84874.180Acetic acid 99%, HiPerSolv CHROMANORM® for LC-MS 500 ml 84874.260Acetic acid 99%, HiPerSolv CHROMANORM® for LC-MS 1 l 84874.290Ammonium acetate HiPerSolv CHROMANORM® for LC-MS 100 g 84885.180Ammonium acetate HiPerSolv CHROMANORM® for LC-MS 500 g 84885.260Ammonium formate HiPerSolv CHROMANORM® for LC-MS 100 g 84884.180Ammonium formate HiPerSolv CHROMANORM® for LC-MS 500 g 84884.260Formic acid 99%, HiPerSolv CHROMANORM® for LC-MS (10×1 ml) 1 SET 85048.001Formic acid 99%, HiPerSolv CHROMANORM® for LC-MS 500 ml 84865.260Formic acid 99%, HiPerSolv CHROMANORM® for LC-MS 1 l 84865.290Triethylamine HiPerSolv CHROMANORM® for LC-MS 100 ml 84883.180Triethylamine HiPerSolv CHROMANORM® for LC-MS 500 ml 84883.260Trifluoroacetic acid HiPerSolv CHROMANORM® for LC-MS (10×1 ml) 1 SET 85049.001Trifluoroacetic acid HiPerSolv CHROMANORM® for LC-MS 100 ml 84868.180Trifluoroacetic acid HiPerSolv CHROMANORM® for LC-MS 500 ml 84868.260Trifluoroacetic acid HiPerSolv CHROMANORM® for LC-MS 1 l 84868.290



Description Pk Cat. No.3-Methoxypropylamine 1000 mg/l in water standard for ion chromatography 100 ml 84978.180Acetate 1000 mg/l in water standard for ion chromatography 100 ml 84951.180Ammonium (in N) 1000 mg/l in water standard for ion chromatography 100 ml 84953.180Ammonium (in N) 1000 mg/l in water standard for ion chromatography 500 ml 84953.260Ammonium 1000 mg/l in water standard for ion chromatography 100 ml 84952.180Ammonium 1000 mg/l in water standard for ion chromatography 500 ml 84952.260Barium 1000 mg/l in water standard for ion chromatography 100 ml 84954.180Benzoate 1000 mg/l in water standard for ion chromatography 100 ml 84955.180Bromate 1000 mg/l in water standard for ion chromatography 100 ml 84956.180Bromide 1000 mg/l in water standard for ion chromatography 100 ml 84957.180Bromide 1000 mg/l in water standard for ion chromatography 500 ml 84957.260Calcium 1000 mg/l in water standard for ion chromatography 100 ml 84958.180Cesium 1000 mg/l in water standard for ion chromatography 100 ml 84959.180Chlorate 1000 mg/l in water standard for ion chromatography 100 ml 84960.180Chloride 1000 mg/l in water standard for ion chromatography 100 ml 84962.180Chloride 1000 mg/l in water standard for ion chromatography 500 ml 84962.260Chlorite 1000 mg/l in NaOH solution standard for ion chromatography 100 ml 84961.180Chromate (in Cr(VI)) 1000 mg/l in water standard for ion chromatography 100 ml 84963.180Citrate 1000 mg/l in water standard for ion chromatography 100 ml 84964.180Diethanolamine 1000 mg/l in water standard for ion chromatography 100 ml 84965.180Fluoride 1000 mg/l in water standard for ion chromatography 100 ml 84966.180Fluoride 1000 mg/l in water standard for ion chromatography 500 ml 84966.260Formiate 1000 mg/l in water standard for ion chromatography 100 ml 84967.180Glyconate 1000 mg/l in water standard for ion chromatography 100 ml 84968.180Hydrogenphthalate 1000 mg/l in water standard for ion chromatography 100 ml 84969.180Hyrogensulphite 1000 mg/l in water standard for ion chromatography 100 ml 84970.180Iodate 1000 mg/l in water standard for ion chromatography 100 ml 84971.180Iodide 1000 mg/l in water standard for ion chromatography 100 ml 84972.180Iodide 1000 mg/l in water standard for ion chromatography 500 ml 84972.260Lactate 1000 mg/l in water standard for ion chromatography 100 ml 84973.180Lithium 1000 mg/l in water standard for ion chromatography 100 ml 84974.180Magnesium 1000 mg/l in water standard for ion chromatography 100 ml 84975.180Magnesium 1000 mg/l in water standard for ion chromatography 500 ml 84975.260Maleate 1000 mg/l in water standard for ion chromatography 100 ml 84976.180Methane sulphonate 1000 mg/l in water standard for ion chromatography 100 ml 84977.180Monoethanolamine 1000 mg/l in water standard for ion chromatography 100 ml 84979.180Monomethylamine 1000 mg/l in water standard for ion chromatography 100 ml 84980.180Nitrate (in N) 1000 mg/l in water standard for ion chromatography 100 ml 84982.180Nitrate (in N) 1000 mg/l in water standard for ion chromatography 500 ml 84982.260Nitrate 1000 mg/l in water standard for ion chromatography 100 ml 84981.180Nitrate 1000 mg/l in water standard for ion chromatography 500 ml 84981.260Nitrilotriacetate 1000 mg/l in water standard for ion chromatography 100 ml 84983.180Nitrite (in N) 1000 mg/l in water standard for ion chromatography 100 ml 84985.180Nitrite (in N) 1000 mg/l in water standard for ion chromatography 500 ml 84985.260Nitrite 1000 mg/l in water standard for ion chromatography 100 ml 84984.180Nitrite 1000 mg/l in water standard for ion chromatography 500 ml 84984.260Oxalate 1000 mg/l in water standard for ion chromatography 100 ml 84986.180Perchlorate 1000 mg/l in water standard for ion chromatography 100 ml 84987.180

IC standardsIon chromatography (IC) is used in many different industries such as food and beverage, environmental, life sciences, pharmaceutical, power generation, electronics and many more. The large number of applications includes analytes like inorganic anions and cations, organic acids, carbohydrates, amino acids, proteins, fatty acids, polysaccharides, polyphosphates, surfactants and more.


Description Pk Cat. No.Phosphate (in P) 1000 mg/l in water standard for ion chromatography 100 ml 84989.180Phosphate (in P) 1000 mg/l in water standard for ion chromatography 500 ml 84989.260Phosphate 1000 mg/l in water standard for ion chromatography 100 ml 84988.180Phosphate 1000 mg/l in water standard for ion chromatography 500 ml 84988.260Potassium 1000 mg/l in water standard for ion chromatography 100 ml 84990.180Potassium 1000 mg/l in water standard for ion chromatography 500 ml 84990.260Propionate 1000 mg/l in water standard for ion chromatography 100 ml 84991.180Silicate 1000 mg/l in water standard for ion chromatography 100 ml 84992.180Sodium 1000 mg/l in water standard for ion chromatography 100 ml 84993.180Sodium 1000 mg/l in water standard for ion chromatography 500 ml 84993.260Strontium 1000 mg/l in water standard for ion chromatography 100 ml 84994.180Succinate 1000 mg/l in water standard for ion chromatography 100 ml 84995.180Sulfite (in HSO3-) 1000 mg/l in water standard for ion chromatography 100 ml 84997.180Sulfite (in HSO3-) 1000 mg/l in water standard for ion chromatography 500 ml 84997.260Sulphate 1000 mg/l in water standard for ion chromatography 100 ml 84996.180Sulphate 1000 mg/l in water standard for ion chromatography 500 ml 84996.260Tartrate 1000 mg/l in water standard for ion chromatography 100 ml 84998.180Thiocyanate 1000 mg/l in water standard for ion chromatography 100 ml 84999.180Thiosulphate 1000 mg/l in amylic alcohol standard for ion chromatography 100 ml 85000.180Triethanolamine 1000 mg/l in water standard for ion chromatography 100 ml 85001.180Triethylamine 1000 mg/l in water standard for ion chromatography 100 ml 85002.180Trimethylamine 1000 mg/l in water standard for ion chromatography 100 ml 85003.180



Format Type Pore size (Å) Particle size (µm) I-Ø×L (mm) Pk Cat. No.Analytical C18 110 3 4,6×50 1 EQV-3C18-0546Analytical C18 110 3 4,6×100 1 EQV-3C18-1046Analytical C18 110 3 4,6×150 1 EQV-3C18-1546Analytical C18 110 5 4,6×150 1 EQV-5C18-1546Analytical C18 110 5 4,6×250 1 EQV-5C18-2546

HPLC columns, ACE® Equivalence™ C18Advanced Chromatography Technologies Limited

Stainless steel

ACE® Equivalence C18 columns have been specifically developed as a high quality, cost effective replacement for many HPLC column brands.

• Excellent efficiency and reproducibility• Available in 3 or 5 µm particle sizes

Maximum recommended pH: 2,0 to 8,0

Description Format Pore size (Å) Particle size (µm) I-Ø×L (mm) Pk Cat. No.Advanced MDK, C18, C18-AR and C18-PFP Analytical 100 1,7 2,1×20 1 KIT MDKA-17-0202UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 1,7 2,1×30 1 KIT MDKA-17-0302UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 1,7 2,1×35 1 KIT MDKA-17-3502UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 1,7 2,1×50 1 KIT MDKA-17-0502UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 1,7 2,1×75 1 KIT MDKA-17-7502UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 1,7 2,1×100 1 KIT MDKA-17-1002UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 1,7 3,0×20 1 KIT MDKA-17-0203UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 1,7 3,0×30 1 KIT MDKA-17-0303UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 1,7 3,0×35 1 KIT MDKA-17-3503UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 1,7 3,0×50 1 KIT MDKA-17-0503UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 1,7 3,0×75 1 KIT MDKA-17-7503UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 1,7 3,0×100 1 KIT MDKA-17-1003U

HPLC/UHPLC columns, ACE® Advanced Method Development Kits, 1,7 µmAdvanced Chromatography Technologies Limited

ACE® Method Development Kits (MDK) are designed to maximise selectivity, offering a powerful and reliable approach to UHPLC/HPLC method development. Based upon an ultra-inert, high efficiency silica, ACE® phases incorporate the latest developments in LC stationary phase design, providing chromatographers with more choices for alternative selectivity, without compromising stability or robustness. A complete range of kits for all requirements is available, including porous, solid-core and bioanalytical 300 Å column kits. These kits group together the essential column chemistries for method development and are available in a wide range of column formats including 0,5 mm and 1,0 mm microbore IDs.

• Porous, solid-core and biomolecule kit options• Wide range of particle sizes (1,7 µm to 5 µm) and complementary phases• Microbore (0,5 mm) to analytical (4,6 mm) IDs in a wide range of column lengths• Ideal for method development• Compatible with all manufacturers’ LC systems


Max. pressure: 400 bar for microbore columns, 1000 bar for analytical columnsDelivery information: ACE® Advanced Method Development Kits contain ACE® C18, ACE® C18-AR and ACE® C18-PFP stainless steel columns.


Description Format Pore size (Å) Particle size (µm) I-Ø×L (mm) Pk Cat. No.Advanced MDK, C18, C18-AR and C18-PFP Microbore 100 2 0,5×50 1 KIT MDKA-2-05005Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 2 0,5×50 1 KIT MDKA-2-05005SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 2 0,5×75 1 KIT MDKA-2-75005Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 2 0,5×75 1 KIT MDKA-2-75005SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 2 0,5×100 1 KIT MDKA-2-10005Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 2 0,5×100 1 KIT MDKA-2-10005SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 2 0,5×125 1 KIT MDKA-2-12005Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 2 0,5×125 1 KIT MDKA-2-12005SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 2 0,5×150 1 KIT MDKA-2-15005Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 2 0,5×150 1 KIT MDKA-2-15005SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 2 1,0×30 1 KIT MDKA-2-0301Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 2 1,0×30 1 KIT MDKA-2-0301SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 2 1,0×50 1 KIT MDKA-2-0501Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 2 1,0×50 1 KIT MDKA-2-0501SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 2 1,0×75 1 KIT MDKA-2-7501Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 2 1,0×75 1 KIT MDKA-2-7501SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 2 1,0×100 1 KIT MDKA-2-1001Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 2 1,0×100 1 KIT MDKA-2-1001SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 2 1,0×125 1 KIT MDKA-2-1201Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 2 1,0×125 1 KIT MDKA-2-1201SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 2 1,0×150 1 KIT MDKA-2-1501Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 2 1,0×150 1 KIT MDKA-2-1501SAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 2,1×20 1 KIT MDKA-2-0202UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 2,1×30 1 KIT MDKA-2-0302UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 2,1×35 1 KIT MDKA-2-3502UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 2,1×50 1 KIT MDKA-2-0502UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 2,1×75 1 KIT MDKA-2-7502UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 2,1×100 1 KIT MDKA-2-1002UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 2,1×125 1 KIT MDKA-2-1202UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 2,1×150 1 KIT MDKA-2-1502UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 3,0×20 1 KIT MDKA-2-0203UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 3,0×30 1 KIT MDKA-2-0303UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 3,0×35 1 KIT MDKA-2-3503UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 3,0×50 1 KIT MDKA-2-0503UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 3,0×75 1 KIT MDKA-2-7503UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 3,0×100 1 KIT MDKA-2-1003UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 3,0×125 1 KIT MDKA-2-1203UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 3,0×150 1 KIT MDKA-2-1503UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 4,6×20 1 KIT MDKA-2-0246UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 4,6×30 1 KIT MDKA-2-0346UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 4,6×35 1 KIT MDKA-2-3546UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 4,6×50 1 KIT MDKA-2-0546UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 4,6×75 1 KIT MDKA-2-7546UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 4,6×100 1 KIT MDKA-2-1046UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 4,6×125 1 KIT MDKA-2-1246UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 2 4,6×150 1 KIT MDKA-2-1546U

HPLC/UHPLC columns, ACE® Advanced Method Development Kits, 2 µm

HPLC/UHPLC columns, ACE® Advanced Method Development Kits, 3 µmDescription Format Pore size (Å) Particle size (µm) I-Ø×L (mm) Pk Cat. No.Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 3 0,5×30 1 KIT MDKA-3-03005SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 3 0,5×50 1 KIT MDKA-3-05005Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 3 0,5×50 1 KIT MDKA-3-05005SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 3 0,5×75 1 KIT MDKA-3-75005Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 3 0,5×75 1 KIT MDKA-3-75005SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 3 0,5×100 1 KIT MDKA-3-10005Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 3 0,5×100 1 KIT MDKA-3-10005SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 3 0,5×125 1 KIT MDKA-3-12005Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 3 0,5×125 1 KIT MDKA-3-12005SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 3 0,5×150 1 KIT MDKA-3-15005Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 3 0,5×150 1 KIT MDKA-3-15005SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 3 1,0×30 1 KIT MDKA-3-0301Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 3 1,0×30 1 KIT MDKA-3-0301SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 3 1,0×50 1 KIT MDKA-3-0501Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 3 1,0×50 1 KIT MDKA-3-0501SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 3 1,0×75 1 KIT MDKA-3-7501Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 3 1,0×75 1 KIT MDKA-3-7501SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 3 1,0×100 1 KIT MDKA-3-1001Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 3 1,0×100 1 KIT MDKA-3-1001SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 3 1,0×125 1 KIT MDKA-3-1201Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 3 1,0×125 1 KIT MDKA-3-1201SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 3 1,0×150 1 KIT MDKA-3-1501



Description Format Pore size (Å) Particle size (µm) I-Ø×L (mm) Pk Cat. No.Advanced MDK, C18, C18-AR and C18-PFP Microbore 100 5 0,5×30 1 KIT MDKA-5-03005Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 5 0,5×30 1 KIT MDKA-5-03005SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 5 0,5×50 1 KIT MDKA-5-05005Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 5 0,5×50 1 KIT MDKA-5-05005SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 5 0,5×75 1 KIT MDKA-5-75005Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 5 0,5×75 1 KIT MDKA-5-75005SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 5 0,5×100 1 KIT MDKA-5-10005Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 5 0,5×100 1 KIT MDKA-5-10005SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 5 0,5×125 1 KIT MDKA-5-12005Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 5 0,5×125 1 KIT MDKA-5-12005SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 5 0,5×150 1 KIT MDKA-5-15005Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 5 0,5×150 1 KIT MDKA-5-15005SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 5 0,5×250 1 KIT MDKA-5-25005Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 5 0,5×250 1 KIT MDKA-5-25005SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 5 1,0×30 1 KIT MDKA-5-0301Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 5 1,0×30 1 KIT MDKA-5-0301SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 5 1,0×50 1 KIT MDKA-5-0501Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 5 1,0×50 1 KIT MDKA-5-0501SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 5 1,0×75 1 KIT MDKA-5-7501Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 5 1,0×75 1 KIT MDKA-5-7501SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 5 1,0×100 1 KIT MDKA-5-1001Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 5 1,0×100 1 KIT MDKA-5-1001SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 5 1,0×125 1 KIT MDKA-5-1201Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 5 1,0×125 1 KIT MDKA-5-1201SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 5 1,0×150 1 KIT MDKA-5-1501Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 5 1,0×150 1 KIT MDKA-5-1501SAdvanced MDK, C18, C18-AR and C18-PFP Microbore 100 5 1,0×250 1 KIT MDKA-5-2501Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 5 1,0×250 1 KIT MDKA-5-2501SAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 2,1×20 1 KIT MDKA-5-0202UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 2,1×30 1 KIT MDKA-5-0302UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 2,1×35 1 KIT MDKA-5-3502UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 2,1×50 1 KIT MDKA-5-0502UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 2,1×75 1 KIT MDKA-5-7502UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 2,1×100 1 KIT MDKA-5-1002UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 2,1×125 1 KIT MDKA-5-1202UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 2,1×150 1 KIT MDKA-5-1502UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 2,1×250 1 KIT MDKA-5-2502UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 3,0×20 1 KIT MDKA-5-0203UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 3,0×30 1 KIT MDKA-5-0303UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 3,0×35 1 KIT MDKA-5-3503UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 3,0×50 1 KIT MDKA-5-0503UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 3,0×75 1 KIT MDKA-5-7503U

HPLC/UHPLC columns, ACE® Advanced Method Development Kits, 5 µm

Description Format Pore size (Å) Particle size (µm) I-Ø×L (mm) Pk Cat. No.Advanced MDK, C18, C18-AR and C18-PFP, 1/32“ connections Microbore 100 3 1,0×150 1 KIT MDKA-3-1501SAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 2,1×30 1 KIT MDKA-3-0302UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 2,1×35 1 KIT MDKA-3-3502UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 2,1×50 1 KIT MDKA-3-0502UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 2,1×75 1 KIT MDKA-3-7502UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 2,1×100 1 KIT MDKA-3-1002UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 2,1×125 1 KIT MDKA-3-1202UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 2,1×150 1 KIT MDKA-3-1502UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 2,1×20 1 KIT MDKA-3-0202UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 2,1×250 1 KIT MDKA-3-2502UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 3,0×20 1 KIT MDKA-3-0203UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 3,0×30 1 KIT MDKA-3-0303UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 3,0×35 1 KIT MDKA-3-3503UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 3,0×50 1 KIT MDKA-3-0503UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 3,0×75 1 KIT MDKA-3-7503UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 3,0×100 1 KIT MDKA-3-1003UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 3,0×125 1 KIT MDKA-3-1203UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 3,0×150 1 KIT MDKA-3-1503UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 3,0×250 1 KIT MDKA-3-2503UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 4,6×20 1 KIT MDKA-3-0246UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 4,6×30 1 KIT MDKA-3-0346UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 4,6×35 1 KIT MDKA-3-3546UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 4,6×50 1 KIT MDKA-3-0546UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 4,6×75 1 KIT MDKA-3-7546UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 4,6×100 1 KIT MDKA-3-1046UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 4,6×125 1 KIT MDKA-3-1246UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 4,6×150 1 KIT MDKA-3-1546UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 3 4,6×250 1 KIT MDKA-3-2546U


Description Format Pore size (Å) Particle size (µm) I-Ø×L (mm) Pk Cat. No.Extended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 1,7 2,1×20 1 KIT MDKE-17-0202UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 1,7 3,0×20 1 KIT MDKE-17-0203UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 1,7 2,1×30 1 KIT MDKE-17-0302UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 1,7 3,0×30 1 KIT MDKE-17-0303UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 1,7 2,1×35 1 KIT MDKE-17-3502UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 1,7 3,0×35 1 KIT MDKE-17-3503UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 1,7 2,1×50 1 KIT MDKE-17-0502UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 1,7 3,0×50 1 KIT MDKE-17-0503UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 1,7 2,1×75 1 KIT MDKE-17-7502UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 1,7 3,0×75 1 KIT MDKE-17-7503UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 1,7 2,1×100 1 KIT MDKE-17-1002UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 1,7 3,0×100 1 KIT MDKE-17-1003U

HPLC/UHPLC columns, ACE® Extended Method Development Kits, 1,7 µmAdvanced Chromatography Technologies Limited



Maximum recommended pH: 2,0 to 8,0 (1,5 to 11,5 for SuperC18™)

Max. pressure: Max. pressure: 400 bar for microbore columns, 1000 bar for analytical columnsDelivery information: ACE® Extended Method Development Kits contain ACE® SuperC18™, ACE® C18-Amide and ACE® CN-ES stainless steel columns.

Description Format Pore size (Å) Particle size (µm) I-Ø×L (mm) Pk Cat. No.Extended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 2 0,5×30 1 KIT MDKE-2-03005Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32” connections Microbore 90/100 2 0,5×30 1 KIT MDKE-2-03005SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 2 0,5×50 1 KIT MDKE-2-05005Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32” connections Microbore 90/100 2 0,5×50 1 KIT MDKE-2-05005SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 2 0,5×75 1 KIT MDKE-2-75005Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32” connections Microbore 90/100 2 0,5×75 1 KIT MDKE-2-75005SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 2 0,5×100 1 KIT MDKE-2-10005Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32” connections Microbore 90/100 2 0,5×100 1 KIT MDKE-2-10005SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 2 0,5×125 1 KIT MDKE-2-12005Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32” connections Microbore 90/100 2 0,5×125 1 KIT MDKE-2-12005S

HPLC/UHPLC columns, ACE® Extended Method Development Kits, 2 µm

Description Format Pore size (Å) Particle size (µm) I-Ø×L (mm) Pk Cat. No.Advanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 3,0×100 1 KIT MDKA-5-1003UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 3,0×125 1 KIT MDKA-5-1203UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 3,0×150 1 KIT MDKA-5-1503UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 3,0×250 1 KIT MDKA-5-2503UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 4,6×20 1 KIT MDKA-5-0246UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 4,6×30 1 KIT MDKA-5-0346UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 4,6×35 1 KIT MDKA-5-3546UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 4,6×50 1 KIT MDKA-5-0546UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 4,6×75 1 KIT MDKA-5-7546UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 4,6×100 1 KIT MDKA-5-1046UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 4,6×125 1 KIT MDKA-5-1246UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 4,6×150 1 KIT MDKA-5-1546UAdvanced MDK, C18, C18-AR and C18-PFP Analytical 100 5 4,6×250 1 KIT MDKA-5-2546U



HPLC/UHPLC columns, ACE® Extended Method Development Kits, 3 µmDescription Format Pore size (Å) Particle size (µm) I-Ø×L (mm) Pk Cat. No.Extended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 3 0,5×30 1 KIT MDKE-3-03005Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32“ connections

Microbore 90/100 3 0,5×30 1 KIT MDKE-3-03005S

Extended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 3 0,5×50 1 KIT MDKE-3-05005Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32“ connections




















Description Format Pore size (Å) Particle size (µm) I-Ø×L (mm) Pk Cat. No.Extended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 2 0,5×150 1 KIT MDKE-2-15005Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32” connections Microbore 90/100 2 0,5×150 1 KIT MDKE-2-15005SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 2 1,0×30 1 KIT MDKE-2-0301Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32” connections Microbore 90/100 2 1,0×30 1 KIT MDKE-2-0301SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 2 1,0×50 1 KIT MDKE-2-0501Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32” connections Microbore 90/100 2 1,0×50 1 KIT MDKE-2-0501SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 2 1,0×75 1 KIT MDKE-2-7501Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32” connections Microbore 90/100 2 1,0×75 1 KIT MDKE-2-7501SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 2 1,0×100 1 KIT MDKE-2-1001Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32” connections Microbore 90/100 2 1,0×100 1 KIT MDKE-2-1001SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 2 1,0×125 1 KIT MDKE-2-1201Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32” connections Microbore 90/100 2 1,0×125 1 KIT MDKE-2-1201SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 2 1,0×150 1 KIT MDKE-2-1501Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32” connections Microbore 90/100 2 1,0×150 1 KIT MDKE-2-1501SExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 2,1×20 1 KIT MDKE-2-0202UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 2,1×30 1 KIT MDKE-2-0302UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 2,1×35 1 KIT MDKE-2-3502UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 2,1×50 1 KIT MDKE-2-0502UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 2,1×75 1 KIT MDKE-2-7502UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 2,1×100 1 KIT MDKE-2-1002UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 2,1×125 1 KIT MDKE-2-1202UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 2,1×150 1 KIT MDKE-2-1502UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 3,0×20 1 KIT MDKE-2-0203UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 3,0×30 1 KIT MDKE-2-0303UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 3,0×35 1 KIT MDKE-2-3503UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 3,0×50 1 KIT MDKE-2-0503UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 3,0×75 1 KIT MDKE-2-7503UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 3,0×125 1 KIT MDKE-2-1203UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 3,0×150 1 KIT MDKE-2-1503UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 4,6×20 1 KIT MDKE-2-0246UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 4,6×30 1 KIT MDKE-2-0346UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 4,6×35 1 KIT MDKE-2-3546UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 4,6×50 1 KIT MDKE-2-0546UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 4,6×75 1 KIT MDKE-2-7546UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 4,6×100 1 KIT MDKE-2-1046UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 4,6×125 1 KIT MDKE-2-1246UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 2 4,6×150 1 KIT MDKE-2-1546U


Description Format Pore size (Å) Particle size (µm) I-Ø×L (mm) Pk Cat. No.Extended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 5 0,5×30 1 KIT MDKE-5-03005Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32“ connections Microbore 90/100 5 0,5×30 1 KIT MDKE-5-03005SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 5 0,5×50 1 KIT MDKE-5-05005Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32“ connections Microbore 90/100 5 0,5×50 1 KIT MDKE-5-05005SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 5 0,5×75 1 KIT MDKE-5-75005Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32“ connections Microbore 90/100 5 0,5×75 1 KIT MDKE-5-75005SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 5 0,5×100 1 KIT MDKE-5-10005Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32“ connections Microbore 90/100 5 0,5×100 1 KIT MDKE-5-10005SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 5 0,5×125 1 KIT MDKE-5-12005Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32“ connections Microbore 90/100 5 0,5×125 1 KIT MDKE-5-12005SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 5 0,5×150 1 KIT MDKE-5-15005Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32“ connections Microbore 90/100 5 0,5×150 1 KIT MDKE-5-15005SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 5 0,5×250 1 KIT MDKE-5-25005Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32“ connections Microbore 90/100 5 0,5×250 1 KIT MDKE-5-25005SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 5 1,0×30 1 KIT MDKE-5-0301Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32“ connections Microbore 90/100 5 1,0×30 1 KIT MDKE-5-0301SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 5 1,0×50 1 KIT MDKE-5-0501Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32“ connections Microbore 90/100 5 1,0×50 1 KIT MDKE-5-0501SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 5 1,0×75 1 KIT MDKE-5-7501Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32“ connections Microbore 90/100 5 1,0×75 1 KIT MDKE-5-7501SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 5 1,0×100 1 KIT MDKE-5-1001Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32“ connections Microbore 90/100 5 1,0×100 1 KIT MDKE-5-1001SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 5 1,0×125 1 KIT MDKE-5-1201Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32“ connections Microbore 90/100 5 1,0×125 1 KIT MDKE-5-1201SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 5 1,0×150 1 KIT MDKE-5-1501Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32“ connections Microbore 90/100 5 1,0×150 1 KIT MDKE-5-1501SExtended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 5 1,0×250 1 KIT MDKE-5-2501Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32“ connections Microbore 90/100 5 1,0×250 1 KIT MDKE-5-2501SExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 2,1×20 1 KIT MDKE-5-0202UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 2,1×30 1 KIT MDKE-5-0302UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 2,1×35 1 KIT MDKE-5-3502UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 2,1×50 1 KIT MDKE-5-0502UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 2,1×75 1 KIT MDKE-5-7502UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 2,1×100 1 KIT MDKE-5-1002UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 2,1×125 1 KIT MDKE-5-1202UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 2,1×150 1 KIT MDKE-5-1502UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 2,1×250 1 KIT MDKE-5-2502UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 3,0×20 1 KIT MDKE-5-0203U

HPLC/UHPLC columns, ACE® Extended Method Development Kits, 5 µm

Description Format Pore size (Å) Particle size (µm) I-Ø×L (mm) Pk Cat. No.Extended MDK, SuperC18™, C18-Amide, CN-ES Microbore 90/100 3 1,0×150 1 KIT MDKE-3-1501Extended MDK, SuperC18™, C18-Amide, CN-ES, 1/32“ connections


Extended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 2,1×20 1 KIT MDKE-3-0202UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 2,1×30 1 KIT MDKE-3-0302UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 2,1×35 1 KIT MDKE-3-3502UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 2,1×50 1 KIT MDKE-3-0502UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 2,1×75 1 KIT MDKE-3-7502UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 2,1×100 1 KIT MDKE-3-1002UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 2,1×125 1 KIT MDKE-3-1202UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 2,1×150 1 KIT MDKE-3-1502UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 2,1×250 1 KIT MDKE-3-2502UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 3,0×20 1 KIT MDKE-3-0203UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 3,0×30 1 KIT MDKE-3-0303UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 3,0×35 1 KIT MDKE-3-3503UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 3,0×50 1 KIT MDKE-3-0503UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 3,0×75 1 KIT MDKE-3-7503UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 3,0×100 1 KIT MDKE-3-1003UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 3,0×125 1 KIT MDKE-3-1203UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 3,0×150 1 KIT MDKE-3-1503UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 3,0×250 1 KIT MDKE-3-2503UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 4,6×20 1 KIT MDKE-3-0246UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 4,6×30 1 KIT MDKE-3-0346UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 4,6×35 1 KIT MDKE-3-3546UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 4,6×50 1 KIT MDKE-3-0546UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 4,6×75 1 KIT MDKE-3-7546UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 4,6×100 1 KIT MDKE-3-1046UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 4,6×125 1 KIT MDKE-3-1246UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 4,6×150 1 KIT MDKE-3-1546UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 3 4,6×250 1 KIT MDKE-3-2546U



HPLC/UHPLC columns, ACE® UltraCore™ Method Development Kits, 2,5 µmAdvanced Chromatography Technologies Limited




Max. pressure: 400 bar for microbore columns, 1000 bar for analytical columns

Delivery information: ACE® Extended Method Development Kits contain ACE® UltraCore™ SuperC18™ and ACE® UltraCore™ SuperPhenylHexyl stainless steel columns.

Description Format Pore size (Å) Particle size (µm) I-Ø×L (mm) Pk Cat. No.Extended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 3,0×30 1 KIT MDKE-5-0303UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 3,0×35 1 KIT MDKE-5-3503UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 3,0×50 1 KIT MDKE-5-0503UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 3,0×75 1 KIT MDKE-5-7503UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 3,0×100 1 KIT MDKE-5-1003UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 3,0×125 1 KIT MDKE-5-1203UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 3,0×150 1 KIT MDKE-5-1503UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 3,0×250 1 KIT MDKE-5-2503UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 4,6×20 1 KIT MDKE-5-0246UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 4,6×30 1 KIT MDKE-5-0346UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 4,6×35 1 KIT MDKE-5-3546UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 4,6×50 1 KIT MDKE-5-0546UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 4,6×75 1 KIT MDKE-5-7546UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 4,6×100 1 KIT MDKE-5-1046UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 4,6×125 1 KIT MDKE-5-1246UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 4,6×150 1 KIT MDKE-5-1546UExtended MDK, SuperC18™, C18-Amide, CN-ES Analytical 90/100 5 4,6×250 1 KIT MDKE-5-2546U

Description Format Pore size (Å) Particle size (µm) I-Ø×L (mm) Pk Cat. No.UltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl

Microbore 95 2,5 0,5×30 1 KIT MDKU-25-03005

UltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl, 1/32“ connections

Microbore 95 2,5 0,5×30 1 KIT MDKU-25-03005S

UltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl



















Description Format Pore size (Å) Particle size (µm) I-Ø×L (mm) Pk Cat. No.UltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl, 1/32“ connections



























Analytical 95 2,5 2,1×20 1 KIT MDKU-25-0202U

















































HPLC/UHPLC columns, ACE® UltraCore™ Method Development Kits, 5 µmDescription Format Pore size (Å) Particle size (µm) I-Ø×L (mm) Pk Cat. No.UltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 2,1×20 1 KIT MDKU-5-0202UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 2,1×30 1 KIT MDKU-5-0302UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 2,1×35 1 KIT MDKU-5-3502UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 2,1×50 1 KIT MDKU-5-0502UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 2,1×75 1 KIT MDKU-5-7502UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 2,1×100 1 KIT MDKU-5-1002UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 2,1×125 1 KIT MDKU-5-1202UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 2,1×150 1 KIT MDKU-5-1502UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 2,1×250 1 KIT MDKU-5-2502UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 3,0×20 1 KIT MDKU-5-0203UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 3,0×30 1 KIT MDKU-5-0303UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 3,0×35 1 KIT MDKU-5-3503UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 3,0×50 1 KIT MDKU-5-0503UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 3,0×75 1 KIT MDKU-5-7503UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 3,0×100 1 KIT MDKU-5-1003UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 3,0×125 1 KIT MDKU-5-1203UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 3,0×150 1 KIT MDKU-5-1503UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 3,0×250 1 KIT MDKU-5-2503UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 4,6×20 1 KIT MDKU-5-0246UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 4,6×30 1 KIT MDKU-5-0346UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 4,6×35 1 KIT MDKU-5-3546UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 4,6×50 1 KIT MDKU-5-0546UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 4,6×75 1 KIT MDKU-5-7546UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 4,6×100 1 KIT MDKU-5-1046UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 4,6×125 1 KIT MDKU-5-1246UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 4,6×150 1 KIT MDKU-5-1546UUltraCore™ MDK, UltraCore™ SuperC18™, UltraCore™ SuperPhenylHexyl Analytical 95 5 4,6×250 1 KIT MDKU-5-2546U

HPLC columns, ACE® Bioanalytical 300 Å Method Development Kits, 3 µmAdvanced Chromatography Technologies Limited




Max. pressure: 275 bar

Delivery information: ACE® Extended Method Development Kits contain ACE® C18-300, ACE® C4-300 and ACE® Phenyl-300 stainless steel columns.


Description Format Pore size (Å) Particle size (µm) I-Ø×L (mm) Pk Cat. No.Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Microbore 300 3 0,5×30 1 KIT MDKB-3-03005Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300, 1/32” connections

Microbore 300 3 0,5×30 1 KIT MDKB-3-03005S

Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Microbore 300 3 0,5×50 1 KIT MDKB-3-05005Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300, 1/32” connections






















Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 2,1×20 1 KIT MDKB-3-0202Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 2,1×30 1 KIT MDKB-3-0302Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 2,1×35 1 KIT MDKB-3-3502Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 2,1×50 1 KIT MDKB-3-0502Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 2,1×75 1 KIT MDKB-3-7502Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 2,1×100 1 KIT MDKB-3-1002Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 2,1×125 1 KIT MDKB-3-1202Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 2,1×150 1 KIT MDKB-3-1502Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 3,0×20 1 KIT MDKB-3-0203Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 3,0×30 1 KIT MDKB-3-0303Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 3,0×35 1 KIT MDKB-3-3503Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 3,0×50 1 KIT MDKB-3-0503Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 3,0×75 1 KIT MDKB-3-7503Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 3,0×100 1 KIT MDKB-3-1003Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 3,0×125 1 KIT MDKB-3-1203Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 3,0×150 1 KIT MDKB-3-1503Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 4,6×20 1 KIT MDKB-3-0246Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 4,6×30 1 KIT MDKB-3-0346Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 4,6×35 1 KIT MDKB-3-3546Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 4,6×50 1 KIT MDKB-3-0546Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 4,6×75 1 KIT MDKB-3-7546Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 4,6×100 1 KIT MDKB-3-1046Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 4,6×125 1 KIT MDKB-3-1246Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 4,6×150 1 KIT MDKB-3-1546

46 VWR | VWR® FOR CHROMATOGRAPHY COLUMNS, CONSUMABLES AND REAGENTSXT


Description Format Pore size (Å) Particle size (µm) I-Ø×L (mm) Pk Cat. No.Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Microbore 300 5 0,5×30 1 KIT MDKB-5-03005Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300, 1/32” connections




























Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 2,1×20 1 KIT MDKB-5-0202Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 2,1×30 1 KIT MDKB-5-0302Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 2,1×35 1 KIT MDKB-5-3502Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 2,1×50 1 KIT MDKB-5-0502Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 2,1×75 1 KIT MDKB-5-7502Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 2,1×100 1 KIT MDKB-5-1002Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 2,1×125 1 KIT MDKB-5-1202Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 2,1×150 1 KIT MDKB-5-1502Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 2,1×250 1 KIT MDKB-5-2502Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 3,0×20 1 KIT MDKB-5-0203Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 3,0×30 1 KIT MDKB-5-0303Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 3,0×35 1 KIT MDKB-5-3503Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 3,0×50 1 KIT MDKB-5-0503Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 3,0×75 1 KIT MDKB-5-7503Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 3,0×100 1 KIT MDKB-5-1003Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 3,0×125 1 KIT MDKB-5-1203Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 3,0×150 1 KIT MDKB-5-1503Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 3,0×250 1 KIT MDKB-5-2503Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 3 4,6×20 1 KIT MDKB-5-0246Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 4,6×30 1 KIT MDKB-5-0346Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 4,6×35 1 KIT MDKB-5-3546Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 4,6×50 1 KIT MDKB-5-0546Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 4,6×75 1 KIT MDKB-5-7546Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 4,6×100 1 KIT MDKB-5-1046Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 4,6×125 1 KIT MDKB-5-1246Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 4,6×150 1 KIT MDKB-5-1546Bioanalytical 300 Å MDK, C18-300, C4-300, Phenyl-300 Analytical 300 5 4,6×250 1 KIT MDKB-5-2546

HPLC columns, ACE® Bioanalytical 300 Å Method Development Kits, 5 µm



Description Pk Cat. No.2-Propanol HiPerSolv CHROMANORM® for preparative HPLC 25 l 84531.4602-Propanol HiPerSolv CHROMANORM® for preparative HPLC 200 l 84531.550Acetonitrile HiPerSolv CHROMANORM® for preparative HPLC 25 l 84533.460Acetonitrile HiPerSolv CHROMANORM® for preparative HPLC 200 l 84533.550Ethyl acetate HiPerSolv CHROMANORM® for preparative HPLC 25 l 84532.460Ethyl acetate HiPerSolv CHROMANORM® for preparative HPLC 200 l 84532.550Methanol HiPerSolv CHROMANORM® for preparative HPLC 25 l 84529.460Methanol HiPerSolv CHROMANORM® for preparative HPLC 200 l 84529.550n-Hexane HiPerSolv CHROMANORM® for preparative HPLC 25 l 84530.460n-Hexane HiPerSolv CHROMANORM® for preparative HPLC 200 l 84530.550

Preparative solvents, HiPerSolv CHROMANORM®Hipersolv CHROMANORM for preparative solvents are tailored to the requirements of preparative HPLC to facilitate scale-up from analytical to preparative separations. With their extremely low evaporation residue (< 5 mg/l) and low water content, they ensure optimal protection for columns.

• High quality• Excellent reproducibility of final results• Available in 25 and 200 litre pack sizes• Filled under inert gas

Description Pk Cat. No.Acetonitrile HiPerSolv CHROMANORM® ACS, Reag. Ph. Eur., super gradient grade for HPLC 10 l 83639.910Acetonitrile HiPerSolv CHROMANORM® ACS, Reag. Ph. Eur., super gradient grade for HPLC 28 l 83639.928Methanol HiPerSolv CHROMANORM® gradient grade for HPLC 10 l 20864.910Methanol HiPerSolv CHROMANORM® gradient grade for HPLC 28 l 20864.928

Solvents for HPLC, in aluminium packagingAcetonitrile and methanol solvents are now available in HiPerSolv CHROMANORM® gradient grade in large aluminium bottles (10 litre and 28 litre) for customers with high quality and high volume requirements of HPLC, UPLC and UHPLC instrumentation.

• Purified from selected raw materials to meet your analytical requirements• Filtered at 0,2 μm and bottled under nitrogen• Very high UV transmittance• Very low water content and residue on evaporation• Excellent batch to batch reproducibility

The benefits of aluminium packaging can be summarised as follows:

• Lightweight container yet robust mechanical strength against knocks and perforation

• Inert to high purity solvents• Protects against ingress of light and gases• 99,5% pure Aluminium – harmless and with a good scrap value for easy recycling• Improved safety: Removes risk of glass breakages

HPLC SOLVENTS IN ALUMINIUM PACKS

For adaptators to connect different pumps or withdrawal systems,askfor the brochure ‘HPLC solvents in aluminium packs’.



Description Material Flow rate (l/min) Immersion depth (mm) Pk Cat. No.Mini solvent pump for 1−5 l containers, connecting thread GL 45, with PTFE hose (6×8 mm), including a 2 m cable

PTFE/stainless steel 1,8 400 1 223-0104

Description Pk Cat. No.AccessoriesThread adapter for Mini solvent pump, PTFEInternal thread: S40External thread: GL45

1 223-0101

Thread adapter for Mini solvent pump, ETFEInternal thread: GL38External thread: GL45

1 223-0102

Thread adapter for Mini solvent pump, ETFEInternal thread: GL32External thread: GL45

1 223-0103

Mini solvent pump for bottlesBürkle

The Mini solvent pump is a high-quality hand pump for small containers such as bottles, canisters and tanks up to about 5 litres. For reliable filling and dosing of solvents and readily flammable liquids.

The hand pump works according to the excess pressure principle. An excess pressure is built up in the container with the pump ball, forcing the liquid outward. In this way only the hose, pumping tube and discharge come in contact with the liquid being filled. To ensure safety, a pressure relief valve protects the solvent pump against excessive pressure build-up, for example due to sunshine.

• All parts of the pump in contact with medium are manufactured from high-quality and inert materials PTFE and stainless steel (1.4301, 1.4404), which feature excellent chemical resistance

• The Mini solvent pump is therefore especially well suited for use with high-purity liquids and readily flammable media such as acetone, isopropanol, ethanol and methanol, etc

• The solvent pump allows for filling from a wide range of container sizes• The flexible PTFE hose that conveys liquid out of the container can be shortened to any length, this ensures ideal residual

draining, even from bottles and canisters with a vaulted bottom

Complementary information: The grounding cable included with delivery can easily be connected to the solvent pump with a bunch plug, thus diverting electrostatic charges so that flammable media can be filled safely.

Drum pumps, for combustible liquidsBürkle

Stainless steel V2A (1.4301) / AISI 304

With rigid discharge tube or flexible 1,2 m PTFE/stainless steel discharge hose with ball valve made of stainless steel. Both tube and hose can be unscrewed. Immersion tube diameter 32 mm. Ideal for decanting combustible and highly flammable liquids. The pump can conduct electricity and when used in conjunction with the anti-static kit (223-1391) fulfils the requirements for handling flammable liquids.

NOTE: The pumps are not suitable for use with acetone.

• PTFE seals ensure long-term maintenance-free usage• Delivery rate depending on length of pump approximately 220 to 560 ml/stroke• Stepless adjustment of pump immersion depth to ensure good residual extraction

Pump with rigid discharge tube

!

Description Material Flow rate Immersion depth (mm) Total length (mm) Pk Cat. No.Stainless steel barrel pump Stainless steel 220 360 480 1 223-1312Barrel pump with flexible hose and stopcock Stainless steel 220 360 480 1 223-1233Stainless steel barrel pump Stainless steel 350 570 690 1 223-1313Barrel pump with flexible hose and stopcock Stainless steel 350 570 690 1 223-1234Stainless steel barrel pump Stainless steel 560 ml/Hub 910 1030 1 223-1314Barrel pump with flexible hose and stopcock Stainless steel 560 ml/Hub 910 1030 1 223-1235


Description Pk Cat. No.AccessoriesAnti-static kit 1 223-1391Discharge hose, 1,2 m, with stainless steel/PTFE stopcock for stainless steel barrel pump 1 223-1250Discharge tube 1 223-1237Threaded drum connection 1 223-1361Threaded drum connection, gas-tight 1 223-1249

Drum pumps, Ultra-pureBürkle

PTFE, white

Ideal for decanting high purity liquids. Materials in contact with liquid are PTFE and FEP, these enable liquids, which attack conventional materials such as PP and PVC to be pumped (except elemental fluorine). The stopcock made of PTFE prevents the escape of hazardous vapours and stops dripping.

• Excellent chemical resistance • Threaded drum connections for commercially available containers are optionally available • Infinitely variable adjustment of pump immersion depth guaranteeing good residual extraction

!

Description Material Flow rate (ml/stroke) Immersion depth (mm) Tube Ø (mm) Pk Cat. No.Barrel Pump with discharge tube PTFE 270 600 32 1 223-0094Barrel Pump with tubing and tap PTFE 400 950 32 1 233-0121Barrel pump with discharge tube PTFE 400 950 32 1 223-0038Barrel Pump with tubing and tap PTFE 400 950 32 1 223-0096

Description Pk Cat. No.Florisil® for chromatographic analysis 30 - 60 Mesh 250 g 150243C

Florisil® 30-60 mesh

Description Pk Cat. No.Silica gel for Flash ChromatographySilica gel irregular ZEOprep® 60 for chromatography, particle size 40 - 63 µm

1 kg 84894.290

Silica gel irregular ZEOprep® 60 for chromatography, particle size 40 - 63 µm

2,5 kg 84894.320


5 kg 84894.360


25 kg 84894.460

Silica gel bulk materialSilica gel 60 is a proven, highly successful packing material providing fast, effective and reproducible separations. The irregular shaped silica gel is used in gravity-, flash- and medium pressure chromatography.

Description Pk Cat. No.Silica gel irregular ZEOprep® 60 for chromatography, particle size 60 - 200 µm

1 kg 84893.290


2,5 kg 84893.320


5 kg 84893.360


25 kg 84893.460

Silica gel bulk materialSilica gel 60 is a proven, highly successful packing material providing fast, effective and reproducible separations. The irregular shaped silica gel is used in gravity-, flash- and medium pressure chromatography.

Specifications:

Undersize <63 µm: ≤5,0%

Oversize >200 µm: ≤5,0%

Residual water content: 2,0 - 4,0%

Bulk density: 460 - 550 g/l

Conductivity (5% suspension): ≤200 µS/cm

pH value (5% w/w, suspension, EN ISO 787-9): 6,5 - 7,5

Pore volume (BET): 0,70 - 0,85 ml/g

Specific surface (BET): 470 - 530 m²/g


Gas chromatography

Description Pk Cat. No.Acetone PESTINORM® for pesticide residue analysis 1 l 83656.290Acetone PESTINORM® for pesticide residue analysis 2,5 l 83656.320Acetonitrile PESTINORM® for pesticide residue analysis 1 l 83657.290Acetonitrile PESTINORM® for pesticide residue analysis 2,5 l 83657.320Cyclohexane PESTINORM® for pesticide residue analysis 1 l 83658.290Cyclohexane PESTINORM® for pesticide residue analysis 2,5 l 83658.320Dichloromethane PESTINORM® for pesticide residue analysis 1 l 83665.290Dichloromethane PESTINORM® for pesticide residue analysis 2,5 l 83665.320Diethyl ether PESTINORM® for pesticide residue analysis 2,5 l 83659.320Ethyl acetate PESTINORM® for pesticide residue analysis 1 l 83660.290Ethyl acetate PESTINORM® for pesticide residue analysis 2,5 l 83660.320Florisil® for chromatographic analysis 100 - 200 Mesh 250 g 150263GFlorisil® for chromatographic analysis 30 - 60 Mesh 250 g 150243C

Solvents and reagents for pesticide analysis by gas chromatography, PESTINORM®Detection of trace organic substances in the environment requires the use of highly purified solvents for all stages of analysis, starting with sample preparation. PESTINORM® solvents are guaranteed specifically for use in pesticide residue analysis and designed to meet the day-to-day requirements of quality control laboratories. The range offers extremely low halogenated and other organic compounds to prevent sample contamination. Ideal for research and analytical laboratories that test samples for the presence of pesticides or insecticides.

Solvents with high purity, > 99.7%, with residue on evaporation less than 5 ppm

Impurities causing interfering peaks on gas chromatogram are not greater than:

• 5 ng/l of lindane by electron capture detection• 10 ng/l of ethylparathion by phosphorous nitrogen detection

For full details of the specification and hazards of the materials, please go to the VWR website at www.vwr.com

Description Pk Cat. No.Acetone PESTINORM® for capillary GC analysis 2,5 l 83960.320Dichloromethane PESTINORM®, stabilised with 50 ppm of 2-methyl-2-butene 2,5 l 83961.320Ethyl acetate PESTINORM® for capillary GC analysis 2,5 l 83963.320Methanol PESTINORM® for capillary GC analysis 2,5 l 83966.320Methanol PESTINORM® for purge and trap GC analysis 2,5 l 83967.320n-Hexane 99% PESTINORM® for capillary GC analysis 2,5 l 83962.320n-Pentane PESTINORM® for capillary GC analysis 2,5 l 83964.320Petroleum spirit 40 - 60 °C PESTINORM® for capillary GC analysis 2,5 l 83965.320

Pesticide GC/MS and GC capillary solvents, PESTINORM®The BDH Prolabo PESTINORM® capillary grade solvents are guaranteed to have extremely low organic and halogenated derivatives in order to avoid contamination.

• Evaporation residue less than 5 ppm• Filtered at 0,2 μm and bottled under nitrogen• Impurities causing interfering peaks on gas chromatograms are not greater than: 5 ng/l of

Lindane by electron capture detection; 10 ng/l of octanol by flame ionisation detection

For full details of the specification and hazards of the materials, please go to the VWR website at www.vwr.com or see the VWR chemicals catalogue.

Description Pk Cat. No.Florisil® for chromatographic analysis 60 - 100 Mesh 100 g 24278.182Florisil® for chromatographic analysis 60 - 100 Mesh 250 g 24278.230Florisil® for chromatographic analysis 60 - 100 Mesh 1 kg 24278.295Florisil® PR for pesticide residue analysis 60-100 Mesh 100 g 24279.185Methanol PESTINORM® for pesticide residue analysis 1 l 83662.290Methanol PESTINORM® for pesticide residue analysis 2,5 l 83662.320n-Hexane PESTINORM® for pesticide residue analysis 1 l 83661.290n-Hexane PESTINORM® for pesticide residue analysis 2,5 l 83661.320Petroleum spirit 40 - 60°C PESTINORM® for pesticide residue analysis

2,5 l 83663.320

Sodium sulphate PESTINORM® for pesticide residue analysis 1 kg 28116.293Toluene PESTINORM® for pesticide residue analysis 2,5 l 83664.320


Description Pk Cat. No.Acetone PESTINORM® SUPRA TRACE for organic trace analysis 2,5 l 85384.320Cyclohexane PESTINORM® SUPRA TRACE for organic trace analysis

2,5 l 85385.320

Dichloromethane PESTINORM® SUPRA TRACE for organic trace analysis

2,5 l 85386.320

Ethyl acetate PESTINORM® SUPRA TRACE for organic trace analysis

2,5 l 85387.320

Methanol PESTINORM® SUPRA TRACE for organic trace analysis 2,5 l 85394.320n-Heptane 99% PESTINORM SUPRA TRACE for organic trace analysis

2,5 l 85388.320

n-Hexane 95% PESTINORM SUPRA TRACE for all applications in pesticide analysis

2,5 l 85389.320

n-Hexane 99% PESTINORM SUPRA TRACE for all applications in pesticide analysis

2,5 l 85390.320

Petroleum spirit 40-60°C PESTINORM® SUPRA TRACE for organic trace analysis

2,5 l 85392.320

Propan-2-ol PESTINORM® SUPRA TRACE for organic trace analysis

2,5 l 85391.320

Toluene PESTINORM® SUPRA TRACE for organic trace analysis 2,5 l 85393.320

Solvents for organic trace analysis by gas chromatography, PESTINORM® SUPRA TRACEThe PESTINORM® SUPRATRACE solvents are ideal for all gas chromatography laboratory applications, such as highly sensitive pesticide and dioxin analysis. These solvents, with higher specifications than the classical PESTINORM® range, are equally suited to the determination of components in the medium and high boiling range and even in the low boiling range. Customers just need one solvent quality – independent of the sample (e.g. water or soil) and independent of the detection method (GC-ECD, GC-FID, GC-MS).

• Very high purity (>99.9%)• One universal solvent for all samples and sensitive detection

methods• High reliability• Bottled under inert gas and filtered at 0,2 µm

Description Pk Cat. No.1,3-Dimethyl-2-imidazolidinone PESTINORM® for headspace gas chromatography

1 l 85448.290

Dimethyl sulphoxide PESTINORM® for headspace gas chromatography

1 l 85396.290

Dimethyl sulphoxide PESTINORM® for headspace gas chromatography

2,5 l 85396.320

N,N-Dimethylacetamide PESTINORM® for headspace gas chromatography

1 l 85397.290

N,N-Dimethylformamide PESTINORM® for headspace gas chromatography

1 l 85395.290

N,N-Dimethylformamide PESTINORM® for headspace gas chromatography

2,5 l 85395.320

N-Methyl-2-pyrrolidone (NMP) PESTINORM® for headspace gas chromatography

1 l 85398.290

Solvents for headspace analysis by gas chromatography, PESTINORM®Static headspace GC (GC-HS) is a technique used to concentrate volatile analytes prior to analysis. It can improve detection of low levels of volatile analytes and minimise matrix interference by eliminating the need to inject the sample directly. Because the composition and purity of the sample solvent have significant effects on the recovery and quality of chromatogram, VWR have developed solvents specifically for GC-HS applications.

• Very high purity (>99.99% of assay)• Very high UV transmittances• Meet requirements of European Pharmacopoeia• Each batch is specifically evaluated by analysis against OVI

standard (OVI = Organic Volatile Impurities )

Suitable for the analysis of OVI as described by the ICH, USP & EP methods.



Solvents for analysis, Analar NORMAPUR®• Reagents appropriate for classical analysis• Actual values typically >99,8% for most materials • Specification displayed on the labels and certificate of analysis CoA

Description Pk Cat. No.1,2-Dichloroethane AnalaR NORMAPUR® analytical reagent 1 l 23343.2941,2-Dichloroethane AnalaR NORMAPUR® analytical reagent 2,5 l 23343.3281,4-Dioxane AnalaR NORMAPUR® analytical reagent 1 l 23540.2951,4-Dioxane AnalaR NORMAPUR® analytical reagent 2,5 l 23540.3201-Butanol AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

1 l 20810.298

1-Butanol AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

2,5 l 20810.323

1-Propanol AnalaR NORMAPUR® Reag. Ph. Eur. analytical reagent

1 l 20861.294

1-Propanol AnalaR NORMAPUR® Reag. Ph. Eur. analytical reagent

2,5 l 20861.320

2-Propanol AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

1 l 20842.298


1 l 20842.312


2,5 l 20842.323


2,5 l 20842.330

Acetone AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

1 l 20066.296


2,5 l 20066.321


2,5 l 20066.330

Acetonitrile AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

1 l 20071.294

Acetonitrile AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

2,5 l 20071.328

Chloroform AnalaR NORMAPUR® ACS analytical reagent 1 l 22711.290Chloroform AnalaR NORMAPUR® ACS analytical reagent 2,5 l 22711.324Cyclohexane AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

1 l 23224.293

Cyclohexane AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

2,5 l 23224.327

Dichloromethane AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

1 l 23366.293

Dichloromethane AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

2,5 l 23366.327

Dichloromethane AnalaR NORMAPUR® analytical reagent 1 l 23354.246Dichloromethane AnalaR NORMAPUR® analytical reagent 1 l 23354.292Dichloromethane AnalaR NORMAPUR® analytical reagent 2,5 l 23354.326Diethyl ether AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

1 l 23811.292

Diethyl ether AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

2,5 l 23811.326

Diisopropyl ether AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

1 l 24900.296

Ethanol absolute AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

1 l 20821.296


1 l 20821.310

Description Pk Cat. No.Ethanol absolute AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

2,5 l 20821.321


2,5 l 20821.330

Ethyl acetate AnalaR NORMAPUR® ACS, Reag. Ph. Eur. 1035300 analytical reagent

1 l 23882.296


2,5 l 23882.321


2,5 l 23882.330

Formamide AnalaR NORMAPUR® analytical reagent 1 l 24311.291Formamide AnalaR NORMAPUR® analytical reagent 2,5 l 24311.320Methanol AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

1 l 20847.295

Methanol AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

2,5 l 20847.307

Methanol AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

2,5 l 20847.320

Methyl ethyl ketone AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

1 l 25642.291

Methyl ethyl ketone AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

2,5 l 25642.325

N,N-Dimethylformamide AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

1 l 23466.298

N,N-Dimethylformamide AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

2,5 l 23466.323

n-Heptane AnalaR NORMAPUR® analytical reagent 1 l 24551.290n-Heptane AnalaR NORMAPUR® analytical reagent 2,5 l 24551.324n-Hexane 99% AnalaR NORMAPUR® analytical reagent 1 l 24608.296n-Hexane 99% AnalaR NORMAPUR® analytical reagent 2,5 l 24608.321n-Hexane AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

1 l 24577.298

n-Hexane AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

2,5 l 24577.323

n-Pentane AnalaR NORMAPUR® analytical reagent 1 l 26185.297n-Pentane AnalaR NORMAPUR® analytical reagent 2,5 l 26185.322Pyridine AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

1 l 27199.292

Pyridine AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

2,5 l 27199.326

Tetrahydrofuran AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

1 l 28551.296

Tetrahydrofuran AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

2,5 l 28551.321

Toluene AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

1 l 28676.297

Toluene AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

2,5 l 28676.322

Water AnalaR NORMAPUR® analytical reagent 5 l 102923CWater AnalaR NORMAPUR® analytical reagent 10 l 102926DXylene (mixture of isomers) AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

1 l 28975.291

Xylene (mixture of isomers) AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

2,5 l 28975.325


Bio chromatography

Description Pk Cat. No.2-Propanol AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

2,5 l 20842.323

Acetic acid glacial ACS, Reag. Ph. Eur. analytical reagent 1 l 20104.298Acetonitrile HiPerSolv CHROMANORM® ACS, Reag. Ph. Eur., super gradient grade for HPLC

2,5 l 83639.320

Ammonium acetate, ultrapure 500 g 0103-500GAmmonium carbonate AnalaR NORMAPUR® analytical reagent

500 g 21217.260

Ammonium dihydrogen phosphate AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

500 g 21305.260

Bicine, high purity 1 kg 0149-1KGBis(2-hydroxyethyl)amino-tris(hydroxymethyl)methane (BIS-TRIS), ultrapure

500 g 0715-500G

Diethanolamine, reagent grade 1 kg 0238-1KGDimethyl sulphoxide, dehydrated (max. 0.03% H₂O) AnalaR NORMAPUR® analytical reagent

1 l 23500.297

di-Potassium hydrogen orthophosphate analytical reagent 500 g 26931.263di-Sodium hydrogen phosphate, anhydrous AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

500 g 102494C

EDTA disodium salt dihydrate AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

500 g 20302.260

EDTA disodium salt dihydrate for biotechnology 1 kg 0105-1KGEthyl acetate AnalaR NORMAPUR® ACS, Reag. Ph. Eur. 1035300 analytical reagent

2,5 l 23882.321

Formic acid, high purity 500 ml 0961-500MLHEPES sodium salt, high purity 500 g 0485-500GImidazole for biotechnology 1 kg 0527-1KGL(+)-Histidine monohydrochloride monohydrate FCC 500 g E806-500GMES (β-(N-Morpholino)ethanesulphonic acid), high purity 500 g E183-500GMES buffer solution pH 6.0 (0.05 mol/l), A.C.E. 100 ml K458-100MLMethanol HiPerSolv CHROMANORM® Reag. Ph. Eur., gradient grade for HPLC

2,5 l 20864.320

MOPS (γ-(N-Morpholino)propanesulphonic acid), ultrapure 500 g 0670-500GMOPS-Na, high purity 250 g E413-250G

Biochromatography solvents and reagentsThe field of bioseparation, and biochromatography in particular, is advancing very rapidly as our knowledge of the properties of molecules and atomic forces increases.

You will find below some acids, salts, buffers and solvents used in biochromatography in a range of fields including biochemistry, biotechnology, biorecognition and chromatography.

Description Pk Cat. No.Nitric acid 69% AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

1 l 20425.297

Orthophosphoric acid 85% AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

1 l 20624.295

PIPES, high purity 500 g 0488-500GPIPES sesquisodium salt, high purity 250 g 0169-250GPotassium dihydrogen phosphate AnalaR NORMAPUR® Reag. Ph. Eur. analytical reagent

1 kg 26936.293

Potassium hydroxide, pellets AnalaR NORMAPUR® Reag. Ph. Eur. analytical reagent

1 kg 26668.296

Sodium acetate AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

500 g 27653.260

Sodium chloride AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

1 kg 27810.295

Sodium chloride for biotechnology 1 kg 0241-1KGSodium dihydrogen phosphate monohydrate AnalaR NORMAPUR® analytical reagent

500 g 102454R

Sodium formate AnalaR NORMAPUR® 500 g 84850.260Sodium hydrogen carbonate AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

500 g 27778.260

Sodium hydroxide, beads, reagent grade 5 kg 0173-5KGSodium hydroxide, pellets AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent

1 kg 28244.295

Sodium hydroxide 10 mol/l (10 N) in aqueous solution, reagent grade

500 ml E584-500ML

Sulphuric acid 95% AnalaR NORMAPUR® analytical reagent 1 l 20700.298Tricine, ultrapure 500 g E170-500GTriethanolamine hydrochloride, reagent grade 500 g N566-500GTriethylamine 1 l 1B1180-1LTris(hydroxymethyl)aminomethane (TRIS, Trometamol), ultrapure

1 kg 0497-1KG

TRIS HCl (Tris(hydroxymethyl) aminomethane hydrochloride), ultrapure

1 kg 0234-1KG

Water HiPerSolv CHROMANORM®, super gradient grade for HPLC, suitable for UPLC/UHPLC instruments

2,5 l 83650.320

12/2

015-

BW

©2016 VWR ZPROVWRI9237-EN

HungaryVWR International Kft.Simon László u. 4.4034 DebrecenTel.: (52) 521-130Fax: (52) 470-069Email: [email protected]

Ireland / Northern IrelandVWR International Ltd / VWR International (Northern Ireland) LtdOrion Business CampusNorthwest Business ParkBallycoolinDublin 15Tel.: 01 88 22 222Fax: 01 88 22 333Email: [email protected]

ItalyVWR International PBI S.r.l.Via San Giusto 8520153 Milano (MI)Tel.: 02-3320311/02-487791Fax: 800 152999/02-40090010Email: [email protected]

The NetherlandsVWR International B.V.Postbus 81981005 AD AmsterdamTel.: 020 4808 400Fax: 020 4808 480Email: [email protected]

NorwayVWR International ASHaavard Martinsens vei 300978 OsloTel.: 02290Fax: 815 00 940 Email: [email protected]

PolandVWR International Sp. z o.o.Limbowa 580-175 GdanskTel.: 058 32 38 200 do 204 Fax. 058 32 38 205Email: [email protected]

PortugalVWR International - Material de Laboratório, LdaEdifício NeoparkAv. Tomás Ribeiro, 43- 3 D2790-221 CarnaxideTel.: 21 3600 770Fax: 21 3600 798/9Email: [email protected]

AustriaVWR International GmbHGraumanngasse 71150 ViennaTel.: +43 1 97 002 0Fax: +43 1 97 002 600Email: [email protected]

BelgiumVWR International bvbaResearchpark Haasrode 2020Geldenaaksebaan 4643001 LeuvenTel.: 016 385 011Fax: 016 385 385Email: [email protected]

Czech RepublicVWR International s. r. o.Veetee Business ParkPražská 442 CZ - 281 67 Stříbrná SkaliceTel.: +420 321 570 321Fax: +420 321 570 320Email: [email protected]

DenmarkVWR - Bie & BerntsenTransformervej 82860 SøborgTel.: 43 86 87 88Fax: 43 86 87 90Email: [email protected]

FinlandVWR International OyValimotie 900380 HelsinkiTel.: 09 80 45 51Fax: 09 80 45 52 00Email: [email protected]

FranceVWR International S.A.S.Le Périgares – Bâtiment B201, rue Carnot94126 Fontenay-sous-Bois cedexTel.: 0 825 02 30 30 (0,18 € TTC/min)Fax: 0 825 02 30 35 (0,18 € TTC/min)Email: [email protected]

GermanyVWR International GmbHHilpertstraße 20aD - 64295 DarmstadtFreecall: 0800 702 00 07Fax: 0180 570 22 22*Email: [email protected]*0,14 €/Min. aus d. dt. Festnetz

SpainVWR International Eurolab S.L.C/ Tecnología 5-17A-7 Llinars Park08450 - Llinars del VallèsBarcelonaTel.: 902 222 897Fax: 902 430 657Email: [email protected]

SwedenVWR International ABFagerstagatan 18a163 94 StockholmTel.: 08 621 34 00Fax: 08 621 34 66Email: [email protected]

SwitzerlandVWR International GmbHLerzenstrasse 16/188953 DietikonTel.: 044 745 13 13Fax: 044 745 13 10Email: [email protected]

TurkeyVWR International Laboratuar Teknolojileri Ltd.Şti.Orta Mah. Cemal Gürsel Caddesi Ördekcioglu Işmerkezi No.32/1 34896 Pendik - Istanbul Tel.: +90216 598 2900 Fax: +90216 598 2907 Email: [email protected]

UKVWR International LtdCustomer Service CentreHunter Boulevard - Magna ParkLutterworthLeicestershireLE17 4XNTel.: 0800 22 33 44Fax: 01455 55 85 86Email: [email protected]

GO TO VWR.COM FOR THE LATEST NEWS, SPECIAL OFFERS AND DETAILS OF YOUR LOCAL VWR DISTRIBUTOR

AustraliaVWR International, Pty Ltd.Level 1, Unit 1a/60 Enterprise Place Tingalpa, Queensland, 4173Tel.: 1300 727 696Fax: 1300 135 123

ChinaVWR International China Co., Ltd.Shanghai Branch Room 256, No. 3058 Pusan RoadPudong New DistrictShanghai 200123Tel.:+86-21-5898 6888Fax:+86-21-5855 8801Email: [email protected]

IndiaVWR Lab Products Private LimitedNo.139. BDA Industrial Suburb, 6th Main, Tumkur Road, Peenya Post, Bangalore, India – 560058Tel.: +91-80-28078400Fax: +91-80-28078410 Email: [email protected]

New ZealandGlobal Science - A VWR Company 241 Bush Road Albany 0632, Auckland Tel.: 0800 734 100 Fax: 0800 999 002 Email: [email protected]

SingaporeVWR Singapore Pte Ltd18 Gul DriveSingapore 629468Tel: +65 6505 0760Fax: +65 6264 3780Email: [email protected]

VWR® FOR CHROMATOGRAPHY COLUMNS, CONSUMABLES …...VWR® FOR CHROMATOGRAPHY COLUMNS, CONSUMABLES...

Documents

Transcript of VWR® FOR CHROMATOGRAPHY COLUMNS, CONSUMABLES …...VWR® FOR CHROMATOGRAPHY COLUMNS, CONSUMABLES...