VITA CEREC - cerec-pdf.s3.amazonaws.comcerec-pdf.s3.amazonaws.com/VitablocsBroch.pdf · VITA CEREC...
Transcript of VITA CEREC - cerec-pdf.s3.amazonaws.comcerec-pdf.s3.amazonaws.com/VitablocsBroch.pdf · VITA CEREC...
Produkte/Products
VITA CEREC®
CEREC®3-SystemInformationen erhalten Sie vonInformation available fromSirona Dental Systems GmbHFabrikstraße 31 · D-64625 BensheimE-mail: [email protected]://www.sirona.com
CEREC is a registered trademark ofSirona Dental Systems GmbH
VITA CEREC®
Produkte/Products
Ausgabe / Edition 11/00
Products for theCEREC®-Systemfrom VITA
Clinically proven for many years• VITA is the most experienced materials spe-
cialist on industrially manufactured ceramicblocks. We have been producing the VITABLOCS for the CEREC system – clinicallyproven a million times over – since 1985.
• Restorations made of VITABLOCSdemonstrate a very high survival rate.After 10 years a 90.0 % probabilityof success was measured.
• Restorations made of CEREC VITABLOCSMark II demonstrate abrasion propertieswhich correspond to those of naturaltooth enamel.
• Restorations made of VITABLOCS can be verysecurely anchored to the natural tooth sub-stance. This stabilizes the remaining toothsubstance and results in clinical stabilitythanks to a permanently tight marginal seal.
Produkte für dasCEREC®-Systemvon VITA
Klinisch langjährig bewährt• VITA ist der erfahrenste Materialspezialist
von industriell gefertigten Keramikblöcken.Bereits seit 1985 stellen wir mittlerweileklinisch millionenfach bewährteVITABLOCS für das CEREC System her.
• Restaurationen, hergestellt aus VITABLOCS,weisen eine sehr hohe Überlebensrateauf. Die Erfolgswahrscheinlichkeit wurdenach 10 Jahren mit 90,0% gemessen.
• Restaurationen aus CEREC VITABLOCSMark II entsprechen in ihrem Abrasionsver-halten dem des natürlichen Zahnschmelzes.
• Restaurationen, die aus VITABLOCShergestellt wurden, lassen sich absolutsicher an der Zahnsubstanz verankern.Dies stabilisiert die Restzahnsubstanzund ergibt klinische Sicherheit durchdauerhaft dichte Ränder.
4
Unparalleled aestheticsRestorations made of CEREC VITABLOCS fea-ture natural translucency, are more resistantto discolorations and can be very easily adap-ted to the shade of the neighbouring teeth.
Excellent value• With CEREC VITABLOCS you will be
able to mill more restorations per unitof time, and with less wear to yourinstruments, than with any other ceramicmaterial for CEREC.
• With high-strength restorations madeof CEREC VITABLOCS SPINELL,ALUMINA and ZIRCONIA, you will savevaluable working time since you cancement these non-adhesively.
What advantages do the CERECVITABLOCS offer you in the newVITAPAN 3D-MASTER® shade system?
The VITAPAN 3D-MASTER shade system is thelogical further development of the VITAPANclassical shade guide proven for over 40 years,and the result of many years of scientific andclinical studies. The VITAPAN 3D-MASTERshade guide is at present the only system forthe determination of tooth shades that isstructured systematically according to a colori-metric classification principle. It takes intoaccount the three dimensions of colour percep-tions (hence the designation "3D"), i.e.
• Lightness (Value) • Colour saturation (Chroma)• Hue (Hue)
The shades of the VITAPAN 3D-MASTERTooth Guide provide systematic and
Ästhetisch unübertroffenRestaurationen aus CEREC VITABLOCS weiseneine natürliche Transluzenz auf, sind verfär-bungssicher und können farblich sehr einfachden Nachbarzähnen angepasst werden.
Wirtschaftlich• Mit CEREC VITABLOCS schleifen Sie
innerhalb einer Zeiteinheit mehr Restau-rationen mit geringerem Werkzeugver-schleiß, als mit irgendeinem anderenKeramikmaterial für CEREC.
• Mit hochfesten Restaurationen ausCEREC VITABLOCS SPINELL, ALUMINAund ZIRCONIA sparen Sie wertvolleArbeitszeit, weil Sie diese nonadhäsivbefestigen können.
Welchen Nutzen bietet Ihnen dieCEREC VITABLOCS im neuenFarbsystem VITAPAN 3D-MASTER®?
Das VITAPAN 3D-MASTER Farbsystem istdie konsequente Weiterentwicklung der seitüber 40 Jahren bewährten VITAPAN classi-cal Farbskala und das Resultat langjährigerwissenschaftlicher und klinischer Studien.Die VITAPAN 3D-MASTER Farbskala ist dasderzeit einzige System zur Zahnfarbbestim-mung, das nach einem farbmetrischenOrdnungsprinzip systematisch aufgebaut ist.Es berücksichtigt die drei Dimensionen (3D)des Farbeindrucks:
• Farbhelligkeit (Value) • Farbintensität (Chroma)• Farbton (Hue)
Die Farben der VITAPAN 3D-MASTERFarbskala decken gleichmäßig den bei den
5
equidistant coverage of the colour spaceoccupied by natural tooth colours. The shadesystem on which this shade guide is basedpermits unparalleled accuracy with regardto shade selection. These shades are finelygraded in their degree of lightness andhave particularly warm hues, which meansthat they will blend even better withnatural tooth substance. The lightest shade0M1C is used to reproduce the shadeof bleached teeth.
For the CEREC system, VITABLOCSin the following 3D-MASTER shades areavailable for CEREC (=C):0M1C, EL-1M1C, 1M1C, 1M2C, 2M2C,2M3C, 3M2C, 4M2C
Would you like to know more about theVITAPAN 3D-MASTER® shade system?Please contact your local VITAdistributor who will be happy tosend you full details.
6
natürlichen Zähnen vorkommendenFarbraum ab. Das dieser Farbskala zugrundeliegende Farbsystem ermöglicht eineunübertroffene Sicherheit in Bezug aufdie Eindeutigkeit der Farbauswahl.Diese Farben sind in ihrem Helligkeitswertfein abgestuft, besonders warmtönig undfügen sich deshalb noch besser in dienatürliche Zahnsubstanz ein. Die hellsteFarbe OM1C dient zur Reproduktiongebleichter Zähne.
Für das CEREC System stehen VITABLOCSin den folgenden 3D-MASTER Farben fürCEREC (=C) zur Verfügung:0M1C, EL-1M1C, 1M1C, 1M2C, 2M2C,2M3C, 3M2C, 4M2C
Sie möchten mehr über das VITAPAN3D-MASTER Farbsystem erfahren?Bitte wenden Sie sich an Ihren VITAFachhändler, der Ihnen gerneausführliche Informationen zusendet.
VITAPAN 3D-MASTER®
7
Der Erfolg der VITA Machinable Ceramicsberuht auf konzentrierter, kontinuierlicherEntwicklungsarbeit in der Vollkeramik.Die erfolgreiche Innovationstätigkeit desletzten Jahrzehnts ist die Krönung desbeispielhaften Engagements von VITA fürdieses zukunftsträchtige Segment derkonservierenden und prothetischen Zahner-haltung. Heute nimmt VITA auch in der Voll-keramik weltweit eine Spitzenposition ein.
1985 Behandlung der ersten Patientenmit VITABLOCS Mark I an derUniversität Zürich
1986 Erste Serienproduktion(CEREC® VITABLOCS® Mark I) für dieCEREC®-Technologie zur Herstellungvon Inlays/Onlays/Veneers
1991 Einführung der CEREC® VITABLOCS®
Mark II Feinpartikel Feldspatkeramik-blocks
1997 Einführung der CEREC® VITABLOCS®
ALUMINA und CEREC® VITABLOCS®
SPINELL
1998 Erweiterung des CEREC® Materialange-bots durch VITABLOCS Mark II in3D-MASTER® Farben und durch dieVITABLOCS® ESTHETIC LINE
1999 Einführung der CEREC® VITABLOCS®
ZIRCONIA für Kronen
The success of VITA Machinable Ceramicsis based on concentrated, ongoing develop-ments in the field of all-ceramics.The successful innovative enterprise ofthe past decade is the culmination of VITA'sexemplary commitment to this advancedand forward-looking sector of conservativeand prosthetic dentistry.Today, VITA holds a leading positionworldwide in the domain of all-ceramics.
1985 Treatment of the first patientswith VITABLOCS Mark I at theUniversity of Zurich in Switzerland
1986 The first industrially produced VITAceramic blocks (CEREC® VITABLOCS®
Mark II) for manufacturing inlays, onlaysand veneers in the CEREC® technique
1991 Introduction of the CEREC®
VITABLOCS® Mark II fine-particlefeldspar ceramic blocks
1997 Introduction of the CEREC®
VITABLOCS® ALUMINA und CEREC®
VITABLOCS® SPINELL
1998 Extension of the CEREC® rangeof materials with VITABLOCS® Mark IIin the 3D-MASTER® shades and withVITABLOCS® ESTHETIC LINE
1999 Introduction of the CEREC®
VITABLOCS® ZIRCONIA for crowns
VITA Machinable Ceramics for CEREC®
Der Erfolg /The Success
Klinisch millionenfach bewährt/Clinically proven a million times over
CEREC Veneers auf Zähnen 14 bis 24.Hergestellt 1987 mit VITABLOCS Mark I.Nachuntersucht 1998. Klinische Ausführungund Aufnahme: Prof. Dr. W. H. Mörmann,ZZMK der Universität Zürich.
CEREC veneers on teeth 14 - 24.Manufactured in 1987 with VITABLOCS Mark I.Re-examined in 1998. Clinical work andphotograph courtesy of Prof. Dr. W. H. Mörmann,Dental Institute of the University of Zurich,Switzerland.
* nach Krejci, l.: Wear of CEREC and otherrestorative materials. Mörmann, W. H. (Hrsg.):International Symposium on ComputerRestorations. Quintessence Publishing Co.Chicago, 245-251, 1991
** nach Krejci, l.: Heinzmann J.-L. Lutz F.:Verschleiß von Schmelz, Amalgam und ihrerSchmelzantagonisten im computergesteuertenKausimulator.Schweiz Monatsschr, Zahnmed 100: 1285, 1990
* Krejci, I. et al: Wear of CEREC and other resto-rative materials. Int. Symposium on ComputerRestorations. Proceedings, QuintessencePublishing Co., Berlin (1991)
** Krejci, l.: Heinzmann J.-L. Lutz F.:Verschleiß von Schmelz, Amalgam und ihrerSchmelzantagonisten im computergesteuertenKausimulator.Schweiz Monatsschr, Zahnmed 100: 1285, 1990(published in german only)
0,5 1,0 2,7 5,0
100
50
0
CEREC VITABLOCS Mark II*
Schmelz**
Verti
kale
r Sub
stan
zver
lust
(µm
)/ve
rtica
l los
s of
sub
stan
ce (µ
m)
klinische Äquivalente (Jahre)/clinical equivalents (in years)
Abrasion am Schmelz-antagonisten in vitroWear of opposing toothenamel in vitro
Enamel**
8
Klinisch bewährt/Clinically Proven
9
Jahr
e / y
ears
* *
Kapl
an-
Mei
er-
Inde
x
Erfo
lgsw
ahrs
chei
nlic
hkei
t gem
äß K
apla
n-M
eier
Ver
fahr
en, a
lle R
esta
urat
ione
n, n
=10
10*
Kapl
an-M
eier
est
imat
or o
f all
rest
orat
ions
, n=
1010
*
B. R
eiss
, W. W
alth
er: K
linis
che
Lang
zeite
rgeb
niss
e un
d 10
-Jah
res-
Kapl
an-M
eier
-Ana
lyse
von
com
pute
rges
tütz
the
rges
tellt
en K
eram
ikin
lays
nac
h de
m C
EREC
-Ver
fahr
en, I
nter
natio
nal J
ourn
al o
f Com
pute
rized
Den
tistry
200
0; 3
:8
B. R
eiss
, W. W
alth
er: C
linic
al L
ong-
Term
Res
ults
and
10-
year
Kap
lan-
Mei
er A
naly
sis
of C
EREC
Res
tora
tions
,In
tern
atio
nal J
ourn
al o
f Com
pute
rized
Den
tistry
200
0; 3
:8
Klin
isch
e Ü
berl
eben
srat
e vo
n Re
stau
ratio
nen
aus
CERE
C® V
ITA
BLO
CS® M
ark
I / M
ark
IICl
inic
al s
urvi
val r
ate
of re
stau
atio
ns m
ade
of C
EREC
® V
ITA
BLO
CS® M
ark
I / M
ark
II
02
46
810
12
1
0,9
0,8
0,7
0,6
0,5
0,4
0,3
0,2
0,1 0
Überlebensrate/Survival Rate
Klinisch bewährt/Clinically Proven
EL: VITABLOCS ESTHETIC LINEMk II: VITABLOCS Mark IISP: VITABLOCS SPINELLAL: VITABLOCS ALUMINAZR: ZIRCONIA
Biegebruchfestigkeit / Flexural strength
600
500
400
300
200
100
0EL Mk II SP AL ZR
(MPa)
Bruchzähigkeit* / Fracture toughness* (KIC)*Vickerseindrücke / Vickers indentations
(MPa m1/2)
6
5
4
3
2
1
0EL Mk II SP AL ZR
Physikalische Daten / Physical Data
10
Wer
ksto
ff/m
ater
ial
Indi
katio
n/in
dica
tion
Inla
ys
Onla
ys
Vene
ers
Teilk
rone
n/pa
rtial
cro
wns
Front
zahn
kron
en/
ante
rior c
row
ns
Seite
nzah
nkro
nen/
post
erio
r cro
wns
3-gl
iedr
ige
FZ-B
rück
en/
3-un
it an
terio
r brid
ges
3-gl
iedr
ige
SZ-B
rück
en in
cl. M
olar
en/
3-un
it po
ster
ior b
ridge
s (in
cl. m
olar
s)
Fein
parti
kel-F
elds
patk
eram
ik/
Infil
tratio
nske
ram
ik/fin
est p
artic
le fe
ldsp
ar c
eram
icsin
filtra
tion
cera
mics
CERE
C VI
TABL
OCS
CERE
C VI
TABL
OCS
CERE
C VI
TABL
OCS
CERE
C VI
TABL
OCS
CERE
C VI
TABL
OCS
Mar
k II
ESTH
ETIC
LIN
EAL
UMIN
ASP
INEL
LZI
RCON
IACA
-12
CS-1
1CZ
-12
(Al 2O
3)(M
gAl 2O
4)(A
l 2O3/Z
rO2)
•••
––
–
•••
––
–
••
––
–
•••
––
–
••
••
•••
•••
•••
––
*–
*–
––
–*
CERE
C VI
TABL
OCS
Indi
katio
nsüb
ersic
ht /
tabl
e of
indi
catio
ns
•em
pfoh
len
/ rec
omm
ende
d••
mög
lich
/ pos
sible
*in E
ntw
icklu
ng /
unde
r dev
elop
men
t
11
CEREC VITABLOCS Indikationsübersicht / Table of Indications
VITA CEREC 3D-MASTER Sortimentfür CEREC 3Inhalt: 60 VITABLOCS Mark II/ESTHETIC LINE,Zubehör
VITA CEREC 3D-MASTER Assortment Kitfor CEREC 3Contents: 60 VITABLOCS Mark II/ESTHETIC LINE,Accessories
VITA CEREC classical Vollsortimentfür CEREC 3Inhalt: 100 VITABLOCS Mark II,Zubehör
VITA CEREC classical Standard Assortment Kitfor CEREC 3Contents: 100 VITABLOCS Mark II,Accessories
VITA CEREC classical Einführungssortimentfür CEREC 3Inhalt: 40 VITABLOCS Mark II,Zubehör
VITA CEREC classical Introductory Kitfor CEREC 3Contents: 40 VITABLOCS Mark II,Accessories
Sortimente / Assortment Kits
12
VITA CEREC 3D-MASTER Sortimentfür CEREC 2Inhalt: 60 VITABLOCS Mark II/ESTHETIC LINE,Zubehör
VITA CEREC 3D-MASTER Assortment Kitfor CEREC 2Contents: 60 VITABLOCS Mark II/ESTHETIC LINE,Accessories
VITA In-Ceram ALUMINA Sortimentfür CEREC 2 und 3Inhalt: 10 VITABLOCS ALUMINA,Zubehör
VITA In-Ceram ALUMINA Assortment Kitfor CEREC 2 and CEREC 3Contents: 10 VITABLOCS ALUMINA,Accessories
VITA In-Ceram SPINELL Sortimentfür CEREC 2 und 3Inhalt: 10 VITABLOCS SPINELL,Zubehör
VITA In-Ceram SPINELL Assortment Kitfor CEREC 2 and CEREC 3Contents: 10 VITABLOCS SPINELL,Accessories
Sortimente / Assortment Kits
13
VITA In-Ceram ZIRCONIA Sortimentfür CEREC 2 und CEREC 3Inhalt: 10 VITABLOCS ZIRCONIA,Zubehör
VITA In-Ceram ZIRCONIA Assortmentfor CEREC 2 and CEREC 3Contents: 10 VITABLOCS ZIRCONIA,Accessories
CEREC VITABLOCS Mark IISeit 1990 klinisch millionfach bewährteFeinpartikel-Feldspatkeramikblocks mitdem Abrasionsverhalten von natürlichemZahnschmelz.
CEREC VITABLOCS Mark IIFine-particle feldspar ceramic blocks withthe abrasion characteristics of natural toothenamel, clinically proven a million timesover since 1990.
CEREC VITABLOCS ESTHETIC-LINEFeinpartikel-Feldspatkeramikblocks miterhöhter Transluzenz speziell zur Herstellungvon Veneers und Frontzahnkronen geeignet.
CEREC VITABLOCS ESTHETIC LINEFine-particle feldspar ceramic blockswith increased translucency, particularlysuitable for manufacturing veneersand anterior crowns.
Sortimente, Einzelpackungen / Assortments, Single Unit Packages
14
Einzelpackungen / Single Unit Packages
for bleached shade reproduction
CEREC VITABLOCS Mark II, 0M1CExtrem helle Farbe zur Reproduktionvon gebleichten Zähnen.
CEREC VITABLOCS Mark II, 0M1CExtremely light shade for reproductionof bleached teeth.
15
CEREC VITABLOCS ALUMINA,porös gesinterte AL3O3-Blocks zurHerstellung von hochfesten In-CeramALUMINA Vollkeramikkronengerüsten.
CEREC VITABLOCS ALUMINA,porously sintered AL3O3 blocks for the manu-facture of high-strength In-Ceram ALUMINAall-ceramic crown copings.
CEREC VITABLOCS SPINELL,porös gesinterte MgAl2O4-Blocks zurHerstellung von In-Ceram SPINELL Vollkera-mikkronengerüsten mit hoher Transluzenz.
CEREC VITABLOCS SPINELL,porously sintered MgAl2O4 blocksfor the manufacture of In-Ceram SPINELLall-ceramic crown copings with a highdegree of translucency.
CEREC VITABLOCS ZIRCONIA,porös gesinterte Al2O3/ZrO2-Blockszur Herstellung von Vollkeramikkronenge-rüsten hoher Bruchzähigkeit.
CEREC VITABLOCS ZIRCONIA,porously sintered Al2O3/ZrO2 blocksfor the manufacture of all-ceramic crowncopings with a high degree of fracturetoughness.
Einzelpackungen / Single Unit Packages
16
Spezifikation VITABLOCS / Specification of VITABLOCS
V5-12: 15 x 12 x 5 mmverfügbare Materialen: Mark IIverfügbare Farben:3D-MASTER: 0M1C, 1M1C,1M2C,2M2C, 2M3C, 3M2Cclassical: A1C, A2C, A3C, A3,5C, B3C
V5-12: 15 x 12 x 5 mmavailable materials: Mark IIavailable shades: 3D-MASTER: 0M1C, 1M1C,1M2C,2M2C, 2M3C, 3M2Cclassical: A1C, A2C, A3C, A3,5C, B3C
V7: 18 x 12 x 7 mmverfügbare Materialien: ESTHETIC LINEverfügbare Farben:3D-MASTER: EL-1M1Cclassical: –
V7: 18 x 12 x 7 mmavailable materials: ESTHETIC LINEavailable shades: 3D-MASTER: EL-1M1Cclassical: –
I8: 15 x 8 x 8 mmverfügbare Materialien: Mark IIverfügbare Farben: 3D-MASTER: 1M1C,1M2C, 2M2C, 2M3C, 3M2C, 4M2Cclassical: A1C, A2C, A3C, A3,5C, B3C
I8: 15 x 8 x 8 mmavailable materials: Mark IIavailable shades: 3D-MASTER: 1M1C,1M2C, 2M2C, 2M3C, 3M2C, 4M2Cclassical: A1C, A2C, A3C, A3,5C, B3C
17
Spezifikation VITABLOCS / Specification of VITABLOCS
I10: 15 x 10 x 8 mmverfügbare Materialen: Mark IIverfügbare Farben:3D-MASTER: 1M1C,1M2C, 2M2C,2M3C, 3M2C, 4M2Cclassical: A1C, A2C, A3C, A3,5C, B3C
I10: 15 x 10 x 8 mmavailable materials: Mark IIavailable shades: 3D-MASTER: 1M1C,1M2C, 2M2C,2M3C, 3M2C, 4M2Cclassical: A1C, A2C, A3C, A3,5C, B3C
I12: 15 x 12 x 10 mmverfügbare Materialien: Mark IIverfügbare Farben:3D-MASTER: 0M1C, 1M1C,2M2C,2M3C, 3M2C, 4M2Cclassical: A1C, A2C, A3C, A3,5C, B3C
I12: 15 x 12 x 10 mmavailable materials: Mark IIavailable shades: 3D-MASTER: 0M1C, 1M1C,2M2C,2M3C, 3M2C, 4M2Cclassical: A1C, A2C, A3C, A3,5C, B3C
K12: 15 x 12 x 10 mmverfügbare Materialien: ESTHETIC LINEverfügbare Farben:3D-MASTER: EL-1M1Cclassical: –
K12: 15 x 12 x 10 mmavailable materials: ESTHETIC LINEavailable shades:3D-MASTER: EL-1M1Cclassical: –
18
Spezifikation VITABLOCS / Specification of VITABLOCS
I14: 18 x 14 x 12 mmverfügbare Materialen: Mark IIverfügbare Farben:3D-MASTER: 0M1C, 1M1C, 2M2C,2M3C, 3M2C, 4M2Cclassical: A1C, A2C, A3C, A3,5C, B3C
I14: 18 x 14 x 12 mmavailable materials: Mark IIavailable shades: 3D-MASTER: 0M1C, 1M1C, 2M2C,2M3C, 3M2C, 4M2Cclassical: A1C, A2C, A3C, A3,5C, B3C
K14: 18 x 14 x 12 mmverfügbare Materialien: ESTHETIC LINEverfügbare Farben:3D-MASTER: EL-1M1Cclassical: –
K14: 18 x 14 x 12 mmavailable materials: ESTHETIC LINEavailable shades: 3D-MASTER: EL-1M1Cclassical: –
CA-12: 15 x 12 x 10 mmMaterial: In-Ceram ALUMINA (Al2O3)porös gesintert
CA-12: 15 x 12 x 10 mmmaterial: In-Ceram ALUMINA (Al2O3)porously sintered
19
CS-11: 15 x 11 x 10 mmMaterial: In-Ceram SPINELL (MgAl2O4)porös gesintert
CS-11: 15 x 11 x 10 mmmaterial: In-Ceram SPINELL (MgAl2O4)porously sintered
CZ-12: 15 x 12 x 10 mmMaterial: In-Ceram ZIRCONIA (Al2O3/ZrO2)porös gesintert
CZ-12: 15 x 12 x 10 mmmaterial: In-Ceram ZIRCONIA (Al2O3/ZrO2)porously sintered
Spezifikation VITABLOCS / Specification of VITABLOCS
20
Wichtige Hinweise / Important Notes
21
WichtigeHinweise:
• Alle gegenwärtig mit CEREC 2gekennzeichneten VITABLOCS sindmit dem neuen CEREC 3 Systemin vollem Umfang kompatibel, dader Blockhalter unverändert ist.
• Restaurationen aus CEREC®
VITABLOCS® Mark II und VITABLOCS®
ESTHETIC LINE dürfen keinesfallsmit Hartmetall-Instrumenten nachbe-arbeitet werden, weil diese dieKeramik schädigen.
• Zur Konturierung sollen nur Feinkorn-Diamantschleifkörper (40µm) und zurVorpolitur Finierdiamanten (8µm)verwendet werden.
• Die Politur erfolgt am besten mit Al2O3
belegten flexiblen Disks.
• Die Nachbearbeitung ist mit geringerDruckanwendung und unter reichlichWasserkühlung durchzuführen.
Importantnotes:
• All VITABLOCS with the presentdesignation CEREC 2 are fully compatiblewith the new CEREC 3 system, sincethe block holder remains unchanged.
• Restorations made of CEREC®
VITABLOCS® Mark II and VITABLOCS®
ESTHETIC LINE must not be trimmedwith tungsten carbide instruments,as these damage the ceramic.
Only fine-grained diamond abrasives(40µm) should be used for contouring,and finishing diamonds (8µm)for pre-polishing.
• It is reccommended to polishVITA CEREC feldspar ceramic withAl2O3-coated flexible discs.
• The fine corrections should be carriedout under slight pressure, with amplewater cooling.
VITA CEREC Propellant,FCKW-freies Treibgas um dasCEREC POWDER mit dem Sprühkopfauf den Zahn zu applizieren.
VITA CEREC Propellant,CFC-free propellant for applyingCEREC POWDER to the tooth usingthe spray head.
VITA CEREC Sprühkopf für Propellant.Die Kanüle lässt sich um 360°C drehen.
VITA CEREC spray head for propellant.The application needle can be rotatedby 360°.
VITA CEREC POWDER,weißes Kontrastpulver um die Oberflächedes Zahnes für den optischen Abdruckreflexionsfrei zu machen.
VITA CEREC POWDER,white contrast powder to eliminate reflec-tions on the surface of the tooth for theoptical impression.
Zubehör / Accessories
22
VITA CEREC LIQUIDFlüssigkeit dient als temporäres Adhäsivfür das CEREC POWDER. Es lässt sichmit Wasser rückstandsfrei entfernen.
VITA CEREC LIQUIDLiquid serves as temporary adhesive forthe CEREC POWDER. It can be completelyremoved with water.
VITA CEREC DIAMOND DISC E,Diamantierte Schleifscheibe für dasCEREC 2 System, ø = 40 mm
VITA CEREC DIAMOND DISC E,diamond-coated grinding disc for theCEREC 2 system, ø = 40 mm
VITA CEREC Farbmusterschienemit Farbmusterplättchen von allenVITA CEREC Farben.
VITA CEREC shade sample bladewith shade samples of all VITA CERECshades.
Zubehör / Accessories
23
VITA SHADING PASTESortiment mit 8 fluoreszierendenMalfarbenpasten zurOberflächenindividualisierung.
VITA SHADING PASTEAssortment Kit with 8 fluorescentstaining pastes for surfaceindividualization.
VITA SHADING PASTE Sortimentfür VITABLOCS 3D-MASTERmit 9 fluoreszierenden Malfarbenpastenzur Oberflächenindividualisierungspeziell von CEREC 3D-MASTER Farben.
VITA SHADING PASTE Assortment Kitfor VITABLOCS 3D-MASTERwith 9 fluorescent staining pastesfor surface individualizationespecially for CEREC 3D-MASTER shades.
VITA Akzent® Sortimentmit 20 fluoreszierenden Malfarben in Pulver-form zur Oberflächenindividualisierung.
VITA Akzent® Assortment Kitwith 20 fluorescent stains in powder formfor surface individualization.
24
Individualisierung / Individualization
VITADUR® ALPHA STANDARD SET 12für In-CeramVollkeramikmassen zur Verblendung vonIn-Ceram Gerüsten und zum Aufbrennenvon Kontaktpunkten auf Mark II/ESTHETIC LINE Restaurationen.Verfügbar in VITAPAN 3D-MASTER und classical.
VITADUR® ALPHA STANDARD SET 12for In-CeramAll-ceramic materials for veneering In-Ceramsubstructures and for firing contact points onMark II / ESTHETIC LINE restorations. Available inVITAPAN 3D-MASTER and VITAPAN classical shades.
VITADUR® ALPHA MASTER KITfür In-CeramZusatzmassen zur Erzielung vonspeziellen farblichen Effekten.
VITADUR® ALPHA MASTER KITfor In-CeramAdditional porcelains for creatingspecial shade effects.
VITADUR® ALPHA Artist Line-SET ISpezialmassen für Opaleszenz-und Lumineszenzeffekte.
VITADUR® ALPHA Artist Line-SET ISpecial porcelains for creatingopalescent and luminescent effects.
Individualisierung / Individualization
25
VITA ATMOMAT®
kompakter Chairside-Ofen für dieZahnarztpraxis für atmosphärische Brände.Zum Individualisieren und Glasieren vonCEREC-Restaurationen.
VITA ATMOMAT®
Compact chairside furnace forindividualizing and glazing CERECrestorations in the dental practice.
VITA VACUMAT® 40kompakter, vollautomatischerKeramikbrennofen für sämtliche Artenvon dentalkeramischen Bränden.
VITA VACUMAT® 40Compact, fully automaticceramic furnace for all types ofdental ceramic firings.
Keramiköfen / Furnaces
26
VITA CEREC DUO CEMENT KITDualhärtendes Zweikomponenten Feinhybrid-Befestigungskomposit in Universalfarbe fürVITAPAN classical und VITAPAN 3D-MASTERInhalt: 2 Spritzen à 2,5g Basispaste,2 Spritzen à 2,5g Katalysatorpaste,Zubehör
VITA CEREC DUO CEMENT KITDual curing, two-component fine hybridluting composite in universal shade for VITA-PAN classical and VITAPAN 3D-MASTER.Contents: 2 syringes with 2,5g base,2 syringes à 2,5g catalyst, accessories
VITA CEREC A.R.T. BOND SETZweistufiges, lichthärtendesDentin-/Schmelzadhäsiv.Inhalt: 1 Flasche à 5ml PRIMER A,1 Flasche à 5ml PRIMER B,1 Flasche à 5ml BOND, Zubehör
VITA CEREC A.R.T. BOND SETTwo step light curing dentine/enamel adhesiveContents: 1 bottle of 5ml PRIMER A,1 bottle of 5ml PRIMER B,1 bottle of 5ml BOND, accessories
VITA CEREC A.R.T. BOND,PRIMER A+B Refill PackageInhalt: 1 Flasche à 5ml PRIMER A,1 Flasche à 5ml PRIMER B,Zubehör
VITA CEREC A.R.T. BOND,PRIMER A+B Refill PackageContents: 1 bottle of 5ml PRIMER A1 bottle of 5ml PRIMER B,accessories
Ätz- und Adhäsivmaterialien / Etch and Adhesive Products
27
VITA CEREC A.R.T. BOND,BOND Refill PackageInhalt: 1 Flasche à 5ml BOND,Zubehör
VITA CEREC A.R.T. BOND,BOND Refill PackageContents: 1 bottle of 5ml BOND,accessories
Ätz- und Adhäsivmaterialien / Etch and Adhesive Products
VITA LUTING SETSortiment mit allen Materialiendie zur adhäsiven Befestigung von ätzbarenRestaurationen aus Mark II oder ESTHETICLINE Keramik notwendig sind.
VITA LUTING SETAssortment with all materialsnecessary for the adhesive cementationof etchable restorations made of Mark IIor ESTHETIC LINE ceramics.
VITA ETCH & BOND KITTeilsortiment mit Materialien zum Ätzen vonZahnsubstanz und mit Dentinhaftvermittler.
VITA ETCH & BOND KITPartial assortment kit containingdentine bonding agent and materials foretching tooth substance.
28
Ätz- und Adhäsivmaterialien / Etch and Adhesive Products
VITA CEREC ETCHANT GELOrthophosphorsäure-Gel, 35%zum Ätzen von Zahnsubstanz,dunkelblau eingefärbt, standfestInhalt: 2 Spritzen à 2,5ml,Zubehör
VITA CEREC ETCHANT GEL35% orthophosphoric acid gel for etchingtooth substance, dark blue coloured,good stability characteristicsContents: 2 syringes of 2.5ml,accessories
VITA CERAMICS ETCHFlußsäure-Gel, 5% zum Ätzen von Keramik,rot eingefärbt. Nur für extraoralen Gebrauch!Flasche à 6ml oder Spritze à 3ml
VITA CERAMICS ETCH5% hydrofluoric acid gel for etching cera-mics, red coloured. For extra-oral use only!Bottle of 6 ml or syringe of 3 ml
VITA CEMENTATION KITTeilsortiment mit Materialienzum Ätzen von Keramik, Silanhaftvermittler,Glyzerin-Gel und dualhärtendemBefestigungskomposit.
VITA CEMENTATION KITPartial assortment kit containingmaterials for etching ceramic, silanecoupling agent, glycerine gel and dualcuring adhesive composite.
29
VITASIL®
Einkomponenten-SilanhaftvermittlerSpritze à 3ml
VITASIL®
Single-component silane coupling agentsyringe of 3ml
VITA OXY-PREVENTFarbneutrales Glyzerin-Gel zur Vermeidungder Sauerstoff-Inhibitionsschicht. Kann auchals Try-in Paste verwendet werden.Spritze à 3ml
VITA OXY-PREVENTNeutral-coloured glycerine gel to preventthe formation of an oxygen inhibition layer.Can also be used as a try-in paste.Syringe of 3 ml.
Ätz- und Adhäsivmaterialien / Etch and Adhesive Products
30
Notizen / Notes
31
VITA ZahnfabrikH. Rauter GmbH & Co. KGPostfach 1338 · D-79704 Bad SäckingenTelefon: +49 7761/562-0Telefax: +49 7761/562-299Internet: http://www.vita-zahnfabrik.comE-mail: [email protected]