VIMSpcSOFTWAREINSTALLATIONGUIDEREHS7445-02
description
Transcript of VIMSpcSOFTWAREINSTALLATIONGUIDEREHS7445-02
-
Previous Screen
Welcome: h430thi
Product: NO EQUIPMENT SELECTED
Model: NO EQUIPMENT SELECTED
Configuration: NO EQUIPMENT SELECTED
Special InstructionVIMSpc Software Installation Guide{0785, 7601}
Media Number -REHS7445-02 Publication Date -13/01/2014 Date Updated -13/01/2014
i05640302
VIMSpc Software Installation Guide{0785, 7601}
SMCS - 0785-VIM; 7601-VIM
Articulated Truck:735B (S/N: L4D1-UP; T4P1-UP)
740B (S/N: L4E1-UP; T4R1-UP)
740B EJECTOR (S/N: L4F1-UP; T4S1-UP) Excavator:
5130 (S/N: 7TJ1-UP; 5ZL1-UP)
5130B (S/N: 4CS1-UP) 5230 (S/N: 7LL1-UP)
5230B (S/N: 4HZ1-UP)
Load Haul Dump:R1600G (S/N: 9PP1-UP; 9YZ1-UP)
R1700G (S/N: SBR1-UP; 8XZ1-UP)
R2900G (S/N: GLK1-UP; JLK1-UP) Motor Grader:
14M (S/N: B9J1-UP; R9J1-UP)
16M (S/N: B9H1-UP; R9H1-UP) 24H (S/N: 7KK1-UP)
24M (S/N: B9K1-UP; B931-UP)
Off-Highway Truck/Tractor:770G (S/N: RMD1-UP; ECM1-UP)
772G (S/N: RMH1-UP; LTS1-UP)
Page 1 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installation G...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...
MikeText Box
-
773F (S/N: EED1-UP) 776D (S/N: 5ER1-UP; AFS1-UP)
777D (S/N: AGC1-UP)
777F (S/N: JRP1-UP)777G (S/N: T5A1-UP; TNM1-UP; RDR1-UP; T4Y1-UP)
784B (S/N: 5RK1-UP)
784C (S/N: 2PZ1-UP) 785B (S/N: 6HK1-UP)
785C (S/N: 1HW1-UP; APX1-UP; 5AZ1-UP)
785D (S/N: MSY1-UP) 789B (S/N: 7EK1-UP)
789C (S/N: 2BW1-UP)
789D (S/N: SPD1-UP; SHH1-UP) 793B (S/N: 1HL1-UP)
793C (S/N: CBR1-UP; 4AR1-UP; ATY1-UP; 4GZ1-UP)
793D (S/N: FDB1-UP)793F (S/N: SSP1-UP)
795F Series AC (S/N: ERM1-UP)
797 (S/N: 5YW1-UP) 797B (S/N: JSM1-UP)
797F (S/N: LAJ1-UP)
Quarry Truck:773G (S/N: MWH1-UP; JWS1-UP)
775F (S/N: DLS1-UP)
775G (S/N: RFM1-UP; MJS1-UP) Track-Type Tractor:
D10R (S/N: AKT1-UP)
D10T (S/N: RJG1-UP) D10T2 (S/N: RAB1-UP; JJW1-UP)
D11R (S/N: AAF1-UP; 7PZ1-UP)
D11T (S/N: AMA1-UP; MDG1-UP; JEL1-UP; JNS1-UP) D8T (S/N: MLN1-UP; FCT1-UP)
D9T (S/N: TWG1-UP; RJS1-UP)
Underground Articulated Truck:AD30 (S/N: CXR1-UP; DXR1-UP)
AD45B (S/N: CXM1-UP)
AD55B (S/N: JNW1-UP) Wheel Dozer:
854G (S/N: AMP1-UP; A4W1-UP; 1JW1-UP)
854K (S/N: H9K1-UP; H8M1-UP; 2211-UP) Wheel Loader:
950K (S/N: R4A1-UP; J5M1-UP; FER1-UP)
962K (S/N: T6A1-UP; X4T1-UP) 966K (S/N: PBG1-UP; A5S1-UP; TFS1-UP; NGX1-UP)
Page 2 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installation G...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...
-
972K (S/N: PEM1-UP; Z4W1-UP) 980K (S/N: W7K1-UP; GTZ1-UP)
992G (S/N: 7HR1-UP; AZX1-UP; ADZ1-UP)
992K (S/N: H4C1-UP; 8801-UP) 993K (S/N: LWA1-UP; Z9K1-UP)
994 (S/N: 9YF1-UP)
994D (S/N: 3TZ1-UP) 994F (S/N: 4421-UP)
994H (S/N: DWC1-UP)
Introduction
This guide is used as an example for installing VIMSPC 2011A and VIMPPC 2013A. This example is using VIMSPC 2013A on a Windows 7 (64-bit) PC. This guide can beused for installing on other Windows-based operating systems.
Important Safety Information
Work safely. Most accidents that involve product operation, maintenance, and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs.
A person must be alert to potential hazards. This person should also have the necessary training, skills, and tools in order to perform these functions properly.
Safety precautions and warnings are provided in this instruction and on the product. Ifthese hazard warnings are not heeded, bodily injury or death could occur to you or to other persons. Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard.
Therefore, the warnings in this publication and the warnings that are on the product are not all inclusive. If a tool, a procedure, a work method, or operating technique that is not recommended by Caterpillar is used. Ensure that the tool, procedure, work method, or operating technique is safe to use.
Ensure that the product will not be damaged or made unsafe by the operation, lubrication, maintenance, or the repair procedures that are used.
Requirements
The following items are necessary to perform the VIMSpc software installation:
Page 3 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installation G...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...
-
VIMSpc 2013A installation application
ReferenceSpecial Instruction, REHS7337, "VIMSpc Update Release Information"
Installation Requirements
PC Admin Rights are required to install VIMSpc and master database updates. Once installed, standard users can run VIMSpc.
All air cards should be removed and VPN turned OFF prior to installation and when running VIMSpc while connecting to VIMS3G modules.
Firewall Requirements to Enable VIMSpc and ET to Connect to Machines through Ethernet
The firewall or VPN software should be programmed to have rules or exceptions to allow communication on the following Internet ports for a 165.26.78.0/23 IP address space. This allows flashing over Ethernet and servicing certain generations of VIMS applications.. To service all generations of VIMS applications, the rules or exceptions must also be applied to IP address 10.0.0.7, 10.0.0.8, 192.30.52.44, 192.30.52.45, 192.168.1.20, and 192.168.1.21.
Sending and receiving UDP broadcasts on ports 10002 and 31580
Sending and receiving FTP command data on ports 20 and 21
Sending an outgoing FTP connection request to an FTP server on ports >1023
Accepting an incoming FTP data connection request from an FTP server on ports >1023 (i.e. FTP client in active mode)
Sending and receiving Telnet data on port 23
Sending and receiving HTTP data on port 80
Sending and receiving ICMPv4 packets, type 0 (echo-reply) and type 8 (echo-request)
System Requirements
To successfully run VIMSpc, the following computer hardware, communication hardware, cables, and software are needed:
IBM PC compatible with Pentium 1 GHz processor or greater
Page 4 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installation G...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...
-
1 GB RAM
500 MB of available hard drive space
Supported OS: Windows XP, Vista, and Windows 7, 32-bit and 64-bit
RS232 port with 16550AF UART (or compatible) or USB 1.1 or 2.0 port with a USB to Serial Port adapter ( 370-8059 Adapter Kit ) for use with VIMS Download Cable ( 127-9797 Cable As for VIMS ABL and 68K hardware
Ethernet port for use with the VIMS 3G Download Cable ( 305-5528 Wiring Harness ) for VIMS 3G hardware
Adobe PDF reader
VIMSpc Support
For assistance to the dealer, contact the Condition Monitoring Product Support Hotline at the following numbers:
1-800-290-1808 within US and Canada
309-675-6229 outside US and Canada
The hours of operation for the Condition Monitoring Product Support Hotline are 8:00 AM to 4:30 PM Central Time Monday through Friday. For further assistance with this software, contact your Caterpillar dealer or Dealer Solutions Network at:
800-290-8500 USA
800-675-6229 outside USA
https://gdsn.cat.com
Installation Procedure
Follow the below steps for identifying the operating system of the PC:
Page 5 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installation G...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...
MikeText Box
MikeText Box
-
Illustration 1 g02989701
Go to "Start" "Control Panel". Refer to Illustration 1.1.
Illustration 2 g02991059
Select the "System" icon. Refer to Illustration 2.2.
Page 6 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installation G...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...
-
Illustration 3 g02991057
In the "System" section, "System Type" identifies the operating system of the PC.The Illustration 3 shows that the system is using 64-bit operating system.
3.
Follow the below steps for installing VIMSpc Software:
Note: If the system type does not identify 64-bit, then the Operating System is a 32-bitsystem.
Pre-Installation Instructions
Verify whether a copy of VIMSpc 2010A or a copy of VIMSpc 2011A version is installed in your PC. Follow the below steps if either of the copy of VIMSpc2010A or the copy of VIMSpc 2011A Beta version is installed on your PC:
1.
Uninstall previous versions of VIMSpc.a.
Reference""Procedure for Uninstalling VIMSpc Software" "
Look for the following VIMSpc user directory:b.
Windows XP: C:\Documents and Settings\All Users\Caterpillar\VIMS3G
Windows 7: C:\Users\Public\Caterpillar\VIMS3G
Rename the above folder name to "VIMS3G_Old".
Reboot the PC.c.
Note: The PC can have both VIMSpc2009B and 2011A version installed.
Page 7 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installation G...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...
-
If air card is inserted into laptop, remove the air card prior to running the installation. You can insert and re-enable the air card, after completing theinstallation.
2.
Reference""Procedure for Disabling Wireless Network Connections (inclusive of air card)" "
Disable VPN and/or wireless network connections.3.
Reference""Procedure for Disabling Wireless Network Connections (inclusive of air card)" "
Identify the correct LAN.4.
Reference""Procedure for Identifying the LAN" "
Illustration 4 g02991058
Download and install the correct setup executable file. For 32-bit operating system, use "Setup32.exe". For 64-bit operating system, use "Setup64.exe".
5.
Note: To install VIMSpc, you need Administrator rights on the computer. On Windows 7, you also need to run the setup file as an administrator. (Right-click the setup executable, and select "Run as administrator". Refer to Illustration 4.)
Installation Instructions
Note: VIMSpc 2011A and 2013A follow the same installation instructions.
Page 8 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installation G...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...
-
Locate the VIMSpc installation files on the PC. Select and run the appropriate operating system for your PC.
1.
Illustration 5 g02991497
A permission prompt may appear, select "Allow".Install the system software requirements. The VIMSpc installer will check for the system software requirements and prompt for installation of system software requirements. Select "Install". Installation time may vary. Refer to Illustration 5.
2.
Page 9 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installation G...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...
-
Illustration 6 g02991560
Once completed with the system requirements installation, the VIMSpcInstallSheild Wizard will appear. Click "Next" to begin VIMSpc Installation. Refer to Illustration 6.
3.
Illustration 7 g02991060
Page 10 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installatio...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...
-
Review the Caterpillar Inc. Software License Agreement. To proceed with theinstallation, select "I accept the terms in the license agreement". Refer toIllustration 7.
4.
Illustration 8 g02991061
Select "Install" as shown in Illustration 8.5.
Page 11 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installatio...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...
-
Illustration 9 g02991062
The installation will begin as shown in Illustration 9.6.
Illustration 10 g02991063
A prompt will appear asking to install device software. Name: "CaterpillarNetwork adapters". Select "Install" as shown in Illustration 10.
7.
Illustration 11 g02991064
Another prompt will occur. Select "Install" as shown in Illustration 11.8.
Page 12 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installatio...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...
-
Illustration 12 g02991065
Select "Finish" to complete the installation of VIMSpc as shown in Illustration 12.
9.
Procedure for Uninstalling VIMSpc Software
Illustration 13 g03038896
Page 13 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installatio...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...
-
Go to "Control Panel" by selecting "Start" and "Control Panel". Refer to theIllustration 13.
1.
Illustration 14 g03038897
Select "Programs and Features" as shown in the Illustration 14.2.
Illustration 15 g03038898
Scroll to "VIMSpc" and double click. Refer to the Illustration 15.3.
Page 14 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installatio...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...
-
Illustration 16 g03038899
Select "Yes". The uninstall program will run. Refer to the Illustration 16.4.
Procedure for Identifying the LAN
On the back of the PC, there is an TCP/IP Ethernet Port. Once this port has identified connectivity, the port will begin to establish communication. Communication is established between multiple locations throughout the operating system. This verification process can be done either on a dynamic network such as in an office environment or at a machine with VIMS installed.
The installation process is the same in either environment, however the connection status message may differ.
Illustration 17 g02991068
Page 15 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installatio...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...
-
Go to "Start" - "Control Panel" - "Network and Sharing Center" - "Change Adapter Settings". Refer to Illustration 17.
1.
Plugging in and unplugging the Ethernet cable into the Ethernet port of PC will toggle between "connected", "limited connectivity", "unidentified network" or "Network Cable unplugged" status.
2.
Plug in and unplug the Ethernet cable enough times to identify the network connection with toggle status.
3.
Illustration 18 g02991069
Record the LAN that changes. When installing VIMSpc, select the appropriate LAN to ensure whether proper communication is established between VIMS and VIMSpc. If inappropriate LAN is selected during installation, connectivity issues may prompt. Refer to Illustration 18.
4.
Procedure for Disabling Wireless Network Connections (inclusive of air card)
Page 16 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installatio...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...
-
Illustration 19 g02991070
Go to "Start" - "Control Panel" as shown in Illustration 19.1.
Illustration 20 g02991071
Select "Network and Sharing Center" as shown in Illustration 20.2.
Page 17 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installatio...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...
-
Illustration 21 g02991072
Select "Change Adapter Settings" as shown in Illustration 21.3.
Illustration 22 g02991073
Select "Wireless Network Connection". Right -click and select "Disable" as shown in Illustration 22.
4.
Page 18 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installatio...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...
-
Illustration 23 g02991074
The "Disabled" screen appears as shown in Illustration 23.5.
Illustration 24 g02991075
After the VIMSpc Installation is completed, enable the wireless network. Right-click and select "Enable" as shown in Illustration 24.
6.
Page 19 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installatio...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...
-
VIMSpc 2011A v13.1.1 Update Utility Process
VIMSpc 2011A Update utility will update VIMS master data definition to version 13.1.1. The update utility will also provide the following bug fixes for VIMSpc2011Aproduction version:
Support built-in VIMS onboard configurations.No need for dummy .cfg for Wheel loader applications.
Fixed a problem with Datalogger download list not being filtered by machines selected in the report window.
A scroll bar is added in the Download window to show all available data types.
Fixed an issue when migrating data from previous versions of VIMSpc.
Improved the speed of switching between tabs in Report window.
Fixed a problem with "not able to graph snapshot", when equipment number ismodified.
Fixed a problem with connection on French operating system
Fixed the problems, when database files are moved or renamed.
Before Installation
Requirements:
Admin rights are required to install the update utility.
VIMSpc installation files
Note: There are no issues with Cat ET 2009B and VIMSpc 2013A installed on the PC.
During Installation
If VIMSpc is running, exit VIMSpc.1.
Run update executable file.2.
Follow the installation dialogs.3.
Page 20 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installatio...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...
-
After Installation
Launch VIMSpc2011A. The launch screen will prompt to update the master database as shown in Illustration 25.
1.
Illustration 25 g02991076
Click "Yes" to update master data definition. Refer to Illustration 25.2.
Illustration 26 g02991078
Page 21 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installatio...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...
-
Once the update is completed, VIMSpc main window will appear. The following version numbers will appear in the window title. Refer to Illustration 26.
3.
Note: The master data update will be applied to the current user database only. When a different user database with older master definition is selected, VIMSpc2011A will prompt to update master data definition.
Copyright 1993 - 2015 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Mar 24 15:26:04 PDT 2015
h430thi
Page 22 of 22Advanced Full Text Search - REHS7445 - VIMSpc Software Installatio...
3/24/2015https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...