Vibrating
-
Upload
gonzalo-espinoza -
Category
Documents
-
view
344 -
download
16
Transcript of Vibrating
7/16/2019 Vibrating
http://slidepdf.com/reader/full/vibrating-5634f906683e7 1/16
Nordberg Vibrating Equipment
European Region
g q
p
7/16/2019 Vibrating
http://slidepdf.com/reader/full/vibrating-5634f906683e7 2/16
2
In addition to being a provider of crushing and complete
rock and mineral processing solutions, Metso Minerals has
also gained a worldwide reputation as a specialist in
vibrating equipment. This is demonstrated by thousands of
installations worldwide where our screens, feeders and
scalpers operate in the most demanding applications, from
complete multi-stage plants to highly mobile installations.
All of these installations benefit from Metso Minerals’
superior know-how and years of field experience.
A history of qualityIn 2001, Metso Minerals became an even stronger player in
the manufacture of vibrating equipment through the
merger of Nordberg and Svedala. Metso Minerals now offers
more than 300 years of collective experience in vibrating
equipment.
Whatever your process requirements,Metso Minerals has the
right solution - from sturdy feeders and scalpers to efficient
inclined or horizontal classifying screens. Just name your
application, and Metso Minerals’ professionals will find the
most productive and cost-effective vibrating equipment for
you.
The new, comprehensive Metso Minerals vibrating
equipment team is now at your service.
Over 300 years of vibrating equipment expertise
7/16/2019 Vibrating
http://slidepdf.com/reader/full/vibrating-5634f906683e7 3/16
Contents
3
Nordberg B-Series Feeders 4
Nordberg Scalper Series Screens 5
Nordberg TK-Series Feeders 6
Nordberg Primary Series Screens 7
Nordberg Secondary Series Screens 8
Nordberg Ellivar Series Screens 9
Nordberg DF-Series Free Fall Screens 10
Nordberg De-watering Series Screens 11
Nordberg TS-Series Screens 12
Nordberg MS-Series Screens 13
Nordberg FS-Series Screens 14
Nordberg TY-Hummer Series Screens 15
7/16/2019 Vibrating
http://slidepdf.com/reader/full/vibrating-5634f906683e7 4/16
4
Nordberg B-Series Feeders
B10-42-2VB10-52-2V
B13-44-2V
B13-50-3V
B13-56-2V
B16-50-3V
400
500
1012 x 4240 15/22 3800 450-12001012 x 5190 15/22 4500 450-1200
1306 x 4390 22 5200 450-990
1294 x 5200 22 8300 450-1000
1306 x 5640 22 6200 450-900
1612 x 5200 37 9000 450-900
B16-56-2V
B20-60-2V
600
700
1616 x 5790 37 11400 450-900
B20-66-2V 2030 x 6575 55/75 17000 450-900
2040 x 6000 55 15000 450-800
RANGESERIALWidth x Length
(mm)
Power
(kW)
Weight
(kg)
Speed
(rpm)
Nordberg B-Series Feeders are engineered particularly for continuous
operation in hard and abrasive material applications. The feeder design
features robust frame construction, high feeding capacity and compact
overall height that makes the B-Series Feeder an ideal solution for use in a
restricted space, as well as fixed and mobile plants.The B-Series Feeders are
built using modern material technology and the latest engineering
techniques, such as finite element analysis. As a result, high reliability and
long feeder component life in even the most demanding applications is
guaranteed.
The Nordberg B-Series Feeders utilise the B-Series mechanism, consisting of
two geared eccentric shafts to create a linear motion.
7/16/2019 Vibrating
http://slidepdf.com/reader/full/vibrating-5634f906683e7 5/16
100
200
Nordberg Scalper Series Screens
5
AP1032
AP1040
1000 x 3200 15 4000 800 - 900
1000 x 4000 15 4400 800 - 900
AP1242
AP1250
1200 x 4200 22 6300 800 - 900
1200 x 5000 22 7500 800 - 900
CSB1328
H1R1430
1300 x 2800 9 4200 800 - 900
1400 x 3000 2 x 11 5600 1000
CSB1528
EDB1539
1500 x 2800 11 5000 800 - 900
1500 x 3900 2 x 11 9860 800 - 900
H1R1640
AP1650
1600 x 4000 2 x 15 9500 1000
1600 x 5000 2 x 22 9200 800 - 900
H1R1650
H1R1840
1600 x 5000 2 x 22 11000 1000
1800 x 4000 2 x 18.5 10500 1000
EDB1844
H1R2040300
1800 x 4400 2 x 22 14000 800 - 900
2000 x 4000 2 x 18.5 11500 1000
RANGESERIALWidth x Length
(mm)
Power
(kW)
Weight
(kg)
Speed
(rpm)
Nordberg Scalper Series Screens are used to separate raw materials into two
or three fractions before the primary crushing stage. This scalper series
comprises four different machines,EDB, CSB, H1R and AP.
Mechanisms:
CSB: One cylindrical shaft with external counterweights for circular motion.
Grease lubricated.
EDB: Two counter rotating cardan shafts with external counterweights self-
synchronized for linear motion. Oil/ Grease lubricated.
H1R: Two counter rotating eccentric shafts self-synchronized for linear
motion. Oil lubricated.
AP: Two counter rotating unbalanced vibratory motors for linear motion.
Grease lubricated.
The common characteristics of these scalpers are grizzly sections for
efficient separation of raw materials,rigid feeder frame construction for high
reliability and robust steel isolation springs to effectively dampen the
dynamic loads.
EDB H1R
7/16/2019 Vibrating
http://slidepdf.com/reader/full/vibrating-5634f906683e7 6/16
13009605.610081607TK10-15S
TK10-15-2V
16009605.613301926TK13-20S
TK13-20-3V
18009605.616321800TK16-20S
TK16-20-3V
67014402.510161660TK10-15
75014402.510162230TK10-20
TK8-27-2V
TK8-32-2V
TK11-42-2V
Weight (kg)
140014404.57882855
RANGE
17009605.67903205
28009609.411724370
6
Nordberg TK-Series Feeders
Nordberg TK-Series Feeders are available with a solid pan, screen mesh or
grizzly bars.The TK-Series has been designed to be compact in size, light in
weight, yet well suited to hard rock applications. The TK-Series vibrating
feeders utilise grease lubricated unbalanced vibratory motors to create a
linear motion.
TK-Series vibrating feeders can be used for feeding, transporting, scalping
and screening of materials.
Most of the TK-Series vibrating feeders are available with either squirrel-
cage motors or hydraulic drives.
Speed
(rpm)Power (kW)
Power (kW)
Width (mm)Length (mm)
Weight (kg)RANGESpeed
(rpm)Width (mm)Length (mm)
Feeder Feed chute
Feeder grizzly applications
Chutes: closed bottom, rod or screens clothes applications
7/16/2019 Vibrating
http://slidepdf.com/reader/full/vibrating-5634f906683e7 7/16
7
Nordberg Primary Series Screens
(XH) 3048 X 6096 2 x 30 18800 755
(XH) 1219 X 3048 7.5 7.5 3080 5000 755100
(XH) 1219 X 2438 5.5 7.5
SERIALWidth x Length
(mm)
Power (kW)
1 deck 2 decks 3 decks
2720 3000
Weight (kg)
1 deck 2 decks 3 decks
755
200
(XH) 1524 X 3048 7.5 11 3300 3900 755
(XH) 1219 X 3658 7.5 11 15 3400 4030 5300 755
(XH) 1524 X 4267 11 11 15 4000 4620 6700 755(XH) 1524 X 3658 11 11 15 3800 4320 6200 755
300
(XH) 1828 X 3658 11 22 22 4200 4620 6400 755
(XH) 1524 X 4877 11 15 15 4400 5800 7250 755
(XH) 1828 X 4877 15 22 22 5200 6200 8600 755
(XH) 1828 X 4267 11 22 22 4300 5600 7300 755
(XH) 2134 X 4877 30 30 2 x 17 8400 9000 12600 755
(XH) 1828 X 6096 30 2 x 17 8600 12500 755
400
(XH) 2438 X 4877 30 30 2 x 17 8600 9100 13250 755
(XH) 2134 X 6096 30 30 2 x 17 9300 11200 14200 755
(XH) 2438 X 7316 2 x 30 2 x 30 16000 18700 755
(XH) 2438 X 6096 30 2 x 17 2 x 17 9800 12500 17150 755
Speed
(rpm)
CVB1540
CVB1845
CVB2050
CVB2060
200
300
1500 X 4000 11 -1 5 4100 4800 MV2
1800 X 4500 15 - 22 5500 6800MV2 for CVB 1845-2PMV3 for CVB 1845-3P
2000 X 5000 22 6200 7500 MV3
2000 X 6000 22 7500 9300 MV3
RANGESERIAL Width x Length(mm) Power(kW) Weight (kg)2 decks 3 decks MV Vibrationsize
800 - 1000
800 - 1000
800 - 1000
800 - 1000
Speed(rpm)
Nordberg CVB-P and Ripl-Flo XH series screens are heavy-duty inclined primary screens well suited to aggregate
and mining applications. The screen designs incorporate huck-bolted construction to improve load-carrying
capacity and minimise the risk of fatigue loading. The top deck support frame is designed to take either perforated
plate or bolted rubber panels.
The Nordberg CVB-P screen range utilises grease lubricated MV mechanisms, consisting of rotating external
counterweights linked via cardan shaft. The Nordberg Ripl-Flo screen range utilises the oil lubricated Ripl-Flo
mechanism, consisting of a rotating eccentric shaft with additional external counterweight plates. Both the MV
and Ripl-Flo mechanisms are used to create a circular screening motion.
This screen series is available in 1, 2, 3 or 4 decks with many additional options available.
7/16/2019 Vibrating
http://slidepdf.com/reader/full/vibrating-5634f906683e7 8/16
8
Nordberg Secondary Series Screens
Nordberg Secondary Series Screens consist of the KS and CVB range. These screens can be used in a variety of
secondary sizing applications. Both the KS and CVB screen range can be used for either dry or wet screening.
However,the KS screens are predominantly used in wet screening applications.
KS and CVB screens are circular motion inclined screens. The CVB screen range utilises grease lubricated MV
mechanisms consisting of rotating external counterweights linked via cardan shaft. The KS screen range utilise an
oil lubricated mechanism, consisting of an eccentric shaft with additional external counterweights.
Available in 1, 2, 3 or 4 deck configurations depending on the size, with many additional options available: dust
enclosure, washing system, ball deck,modular panels and more.
SERIALLength x Width
(mm)
Power (kW)
1 deck 2 decks 3 decks
Weight (kg)
1 deck 2 decks 3 decks
100 (KS) 3000 x 1400 5.5 7.5 1400 2150(KS) 3000 x 1200 5.5 7.5 1300 2050 825-1500
825-1500
(KS) 3000 x 1600 5.5 7.5 1500 2300 825-1500
(KS) 4000 x 1800 7.5 11 2500 3600 825-1500
(KS) 4000 x 1600 7.5 11 15 2200 3000 5000 825-1500
(KS) 5000 x 1400 11 11 2700 3700200 825-1240
(KS) 5000 x 1800 11 18.5 22 3200 5300 6300 825-1240
(KS) 5000 x 2000 15 18.5 22 3400 5900 6700 825-1240
(KS) 6000 x 1800 15 18.5 30 4200 5400 8110 825-1030
(KS) 6000 x 2250 18.5 30 37 5200 8000 11500300 825-1030
(KS) 6000 x 2500 18.5 37 37 5600 10000 12500 825-1030
400(KS) 7000 x 2000 22 30 5800 8000 825-1030
(KS) 7000 x 2500 22 37 7000 11000 825-1030
Speed
(rpm)
CVB1540
CVB1845
CVB2050
CVB2060
200
300
1500 X 4000 11 -1 5 4100 4800 5560 MV2
1800 X 4500 15 - 22 5500 6800 7800MV2
MV3 for CVB 1845-4
2000 X 5000 22 6200 7500 8800MV3
MV2 for CVB 2050-2
2000 X 6000 22 7500 9300 10800MV3
MV4 for CVB 2060-4
RANGESERIALWidth x Length
(mm)
Power
(kW)
Weight (kg)
2 decks 3 decks 4 decks
MV Vibration
size
800 - 1000
800 - 1000
800 - 1000
800 - 1000
Speed
(rpm)
KSCVB
7/16/2019 Vibrating
http://slidepdf.com/reader/full/vibrating-5634f906683e7 9/16
9
Nordberg Ellivar Series Screens
Nordberg Ellivar Series Screens are large inclined screens capable of
handling high tonnages at high efficiency,especially at fine cut points (final
sizing). This is due to their elliptical motion, which guarantees high
screening efficiency by moving the material rapidly at the feed end and
slowly at the discharge end. Optimum screening is also achieved by the
adjustable flow/ counter-flow, amplitude and speed range characteristics.
Ellivar Series Screens utilise grease lubricated MV mechanisms consisting of
rotating external counterweights linked via cardan shaft. The MV
mechanisms are mounted above the center of gravity to create an elliptical
screening motion.
Ellivar 13
Ellivar 16
Ellivar 20
300
400
500
2200 x 610010 400 11 100 12 300 - -
9802 x 15
2 x 11
- - - - 14 700
2630 x 61002 x 11 13 500 14 600 - - -
2 x 15 - - 16 100 17 600 -980
2630 x 7625 2 x 15 15 400 16 400 - 21 300 - 980
RANGESERIALWidth x Length
(mm)
Power
(kW)
Weight (kg)
2 decks 2 decks 1/2 3 decks 3 decks 1/2 4 decks
Speed
(rpm)
MV3
MV4
MV3
MV4
MV4
MV Vibration size
7/16/2019 Vibrating
http://slidepdf.com/reader/full/vibrating-5634f906683e7 10/16
10
3 - Rubber on top deck
Nordberg DF-Series Screens
Nordberg Duo-Flo Series Screens are suited to the processing of primary or
secondary feed material that does not require high accuracy screening. It is
outstanding for scalping natural material, screening in closed circuit with a
crusher, and for screening gravel, where the feed material contains a high
percentage of fines.
The Duo-Flo Series is available in a range of sizes. Each screen deck has 2
different sloping sections.The first section has a steep slope angle resulting
in high material travel rates with low bed depths and rapid fines removal.
The second section has a lower slope angle to decrease material travel rate
to improve near-size material screening.
The upper deck is usually used as a relief deck using large apertures and
creates a vertical flow of material to the underlying deck.
The Duo-Flo Series Screens utilise grease lubricated unbalanced vibratory
motors to create a linear motion.
DF 1210 S
DF 1210 P
100
1200 x 1000 2 x 1.9 1000 1000
1200 x 1000 2 x 3.0 1300 1000
DF 2012 S
DF 2012 P
2000 x 1200 2 x 3.0 1750 1000
DF 2016 P 2000 x 1600 2 x 9.8 4500 1000
2000 x 1200 2 x 8.0 2700 1000
RANGESERIALLength x Width
(mm)
2 - Wire on top deck
3 - Wire on top deck
3 - Rubber on top deck
DF 2018 S 2000 x 1800 2 x 8.5 3400 10003 - Wire on top deck
3 - Rubber on top deck
N° of decksPower
(kW)
Weight
(kg)
Speed
(rpm)
7/16/2019 Vibrating
http://slidepdf.com/reader/full/vibrating-5634f906683e7 11/16
11
Nordberg De-watering Series Screens
Nordberg H-Series Screens are specifcally designed for de-watering and
washing applications.They are available in 1 or 2 deck configurations. The
single deck configuration can be setup with an uphill inclined screen deck
and de-watering back wall specifically for de-watering applications.The two
deck configuration can utilise the top deck as a relief or sizing deck with the
bottom deck used for de-watering or sizing.
The H-series screens utilise an oil lubricated mechanism, consisting of two
self-synchronizing eccentric shafts with additional external counterweights
to create a linear screening motion. A 40° stroke angle is used to achieve
effective de-watering at high capacities.
A washing system can be introduced as an option if necessary.
100022002 x 416002 x 4H 3000 x 1000
100028002 x 5.520002 x 4H 3000 x 1400
100033002 x 7.524002 x 5.5H 4000 x 1400
100041002 x 1127002 x 5.5H 4000 x 1800
100036502 x 1125002 x 5.5H 4000 x 1600
100047002 x 1130002 x 7.5H 4000 x 2000
100046002 x 1134002 x 7.5H 5000 x 1400
100059502 x 1149002 x 11H 5000 x 1800
100063002 x 1553002 x 11H 5000 x 2000
100083502 x 1561002 x 15H 6000 x 2000
1000108002 x 2278002 x 18.5H 6000 x 2500
100
200
300
400
Speed
(rpm)Weight (kg)Power (kW)Weight (kg)Power (kW)
DOUBLE DECKSINGLE DECKRANGESERIAL
7/16/2019 Vibrating
http://slidepdf.com/reader/full/vibrating-5634f906683e7 12/16
12
Nordberg TS-Series Screens
The TS-Screen Series is designed to be modular and robust with exceptional
performance in a very wide range of screening applications.The decks have
three different slopes,with the slope angles reducing towards the discharge
end.
On the first section the steep slope creates high material travel rates,which
enable rapid fines removal. On the second section the slope and the
material travel rate reduce, and the deck is similar to conventional inclined
screening. In the third section the slope reduces further, increasing the
material retention time on the screening surface to improve the removal of
near-sized particles. The overall combination of the 3 different slope
sections and the elliptical screening motion result in high capacity and high
efficiency screening.
TS Series Screens utilise grease lubricated MV mechanisms consisting of
rotating external counterweights linked via cardan shaft. The MV
mechanisms are mounted above the center of gravity to create an elliptical
screening motion.
TS202
TS203200 1530 x 5000 15
4800800/1000
6100
TS302
TS303300 1835 x 6100
15 6200800/1000
22 8200
TS402
TS403400 2445 x 6100
22 8400800/1000
30 11200
TS502
TS503500 2445 x 8200
30 11200-
2 x 22 15000
RANGESERIALWidth x Length
(mm)
Power
(kW)
Weight
(kg)MV2
-
MV2 for TS302
MV3 for TS303
MV3 for TS402
MV4 for TS403
MV4 for TS502
MV3 (4) for TS503
MV Vibration sizeSpeed
(rpm)
7/16/2019 Vibrating
http://slidepdf.com/reader/full/vibrating-5634f906683e7 13/16
13
Nordberg MS-Series Screens
RANGESERIALWidth x Length
(mm)Power(kW)
Weight (kg)Speed(rpm)
MS 08 X 21 SD
MS 08 X 21 DD
MV Vibration size
4 x MV3
4 x MV4400 2400 x 6400
45 11493
55 17193850/950
MS 08 X 24 SD
MS 08 X 24 DD
4 x MV3
4 x MV4450 2400 x 7300
45 13119
55 19186850/950
MS 10 X 21 SD
MS 10 X 21 DD
4 x MV3
4 x MV4550 3100 x 6400
45 13673
55 20366850/950
MS 10 X 24 SD
MS 10 X 24 DD
4 x MV3
4 x MV4580 3100 x 7300
45 14456
55 21427850/950
MS 12 X 24 SD
MS 12 X 24 DD
4 x MV4
4 x MV4700 3600 x 7300
55 16959
55 23501850/950
MS 12 X 27 SD
MS 12 X 27 DD
4 x MV4
4 x MV4750 3600 x 8200
55 17895
55 25460850/950
Nordberg “Banana style” Multi-Slope Screens can be used in primary,
secondary and tertiary applications in both the mining and aggregate
industry.The MS-Series Screens are available in both single and double deck
configurations. The screen decks feature multiple slope sections where the
slope angle reduces progressively towards the discharge end. The steeper
slopes towards the feed end result in high material travel rates with low bed
depths and rapid fines removal. The lower slope angles towards the
discharge end result in reduced material travel rates and high efficiency
screening of near-sized particles. These characteristics enable the multi-
slope screens to handle large throughputs at high efficiency. Multi-Slope
Screens can be economically installed and require less space than
conventional screens of a comparable capacity.
The Multi-Slope Screens utilise grease lubricated MV mechanisms,consisting of rotating external counterweights linked via cardan shaft. Two
counter rotating MV shaft lines create a linear screening motion with a 45°
stroke angle.
7/16/2019 Vibrating
http://slidepdf.com/reader/full/vibrating-5634f906683e7 14/16
14
Nordberg FS-Series Screens
Nordberg FS-Series Screens are designed to be both modular and robust
with exceptional performance in a wide range of applications. The FS series
was designed specifically for mobile plant applications.The construction is
modular with most components being huck-bolted: the screen media
support rails, cross members,feedbox,etc., can be individually replaced.
The FS-Series utilises a triple shaftline MV mechanism configuration.The MV
mechanisms consist of rotating external counterweights linked via cardan
shaft. Each MV shaftline is geared together to produce an elliptical motion
with a 45° stroke angle. The angle, size and shape of the elliptical stroke
pattern can be easily adjusted.The stroke length can be as long as 3/4“ or 20
mm. FS-Series Screens operate at high “G-forces” to keep screen media
apertures clear and provide accurate sizing at high feed rates.
FS ScreensSERIAL Size (mm) Decks Motor (kW)Area (m2)MV vibration
size
FS 203 1500 x 4900 3 227.4 6 x MV2 7515FS 252 1800 x 4900 2 228.8 6 x MV2 6440
FS 253 1800 x 4900 3 308.8 6 x MV3 7664
FS 302 1800 x 6100 2 3011 6 x MV2 7193
FS 303300
1800 x 6100 3 3711 6 x MV2 8571
FS 352 2100 x 6100 2 3712.8 6 x MV2 8984
FS 353 2100 x 6100 3 4512.8 6 x MV3 11927
FS 402400
2400 x 6100 2 3714.6 6 x MV2 9229
FS 403 2400 x 6100 3 4514.6 6 x MV3 12218
Estimated shippingweight (kg)
200
7/16/2019 Vibrating
http://slidepdf.com/reader/full/vibrating-5634f906683e7 15/16
Nordberg TY-Hummer Series Screens
TY-Hummer Series Screens are specifically designed for fine dry screening.
The Hummer Screen design uses gravitational and vibrational forces to
produce high material travel rates, which maximise particle separation.
Concurrently, the sharp, high frequency linear motion rapidly stratifies the
material and speeds the separation process.
Hummer Screens are a unique design that utilises grease lubricated
vibratory motors which vibrate the screen media whilst the screen body
remains stationary.
RANGESERIALWidth x Length
(mm)
Power
(kW)
Weight (kg)
1 deck 2 decks 3 decks
Speed
(rpm)
TY 305
100
914 x 1524 0.5 916 1052 1424 1800/3600
TY 310 914 x 3048 1 1442 1926 2418 1800/3600
TY 315 914 x 4572 1 1994 2690 3572 1800/3600
TY 405 1219 x 1524 0.5 1066 1384 1710 1800/3600
TY 410 1219 x 3048 1 1656 2141 2556 1800/3600
TY 415 1219 x 4572 1 2398 3014 3652 1800/3600
TY 420200 1219 x 6096 2 3007 4013 4559 1800/3600
15
7/16/2019 Vibrating
http://slidepdf.com/reader/full/vibrating-5634f906683e7 16/16
li ki i i TM
Metso Minerals North and Central America3073 South Chase AvenueMilwaukee,WI 53207
USAPhone: +1 414 769 4300Fax: +1 414 769 4730
Metso Minerals South AmericaCaixa Postal 27218035-240 SorocabaBrazilPhone: +55 152 191 300Fax: +55 152 191 695
Metso Minerals Asia-PacificP.O. Box 399West Perth,WA 6872AustraliaPhone: +61 8 9420 5555Fax: +61 8 9320 2500
Metso Minerals North and Central EuropeP.O. Box 400420311 MalmöSwedenPhone: +46 40 24 58 00Fax: +46 40 24 58 78
Metso Minerals South Europe andMediterranean41 rue de la République71000 MâconFrancePhone: +33 3 85 39 62 00Fax: +33 3 8539 6349
Metso Minerals Southern Africa
Wordsworth Office Park 41 Wordworth Avenue, SenderwoodJohannesburg 2007South AfricaPhone: +27 11 723 2000Fax: +27 11 723 2080
Metso MineralsP.O. Box 30733101 TampereFinlandPhone: +358 20 484 140Fax: +358 20 484 141
www.metsominerals.comE-mail: [email protected]