Ven chem 208
1
Ven-Chem 208™ is an oil-dispersible, powdered organophilic lignite engi- neered for superior filtration control in oil base and invert emulsion mud sys- tems. Ven-Chem 208™ is a chemically modified, organophillic lignite and contains no asphalt or asphalt derivatives. Ven-Chem 208™ provides rapid and effective reduction of excessive fluid loss in diesel oil, mineral oils, and high bottom-hole temperatures. Secondary benefits of Ven-Chem 208™ treatments are improved emulsion stability, improved suspension, and more stable rheological properties. Ven-Chem 208™ is for use in syn- thetics, oil bases and invert emulsion muds and can be added directly to the system through the hopper. Typ- ical treatment levels are 2-10 lb/bbl depending on the desired level of control, the type of system used, and the bottom hole temperature. Ven-Chem 208™ can be used in many types of systems, such as synthetics, mineral oil muds, diesel muds, 100% oil phase muds, coring fluids and oil base workover and completion fluids. It is compatible with most types of emulsifiers, oil wet- ting agents and mud viscosifiers in current use. Ven-Chem 208™ can be used ef- fectively at bottom hole tempera- tures up to 400° F and applications at even hight temperatures are pos- sible through use of a special “slug treatment” technique. Contact en- ventives, LLC. for further information. Technical assistance is available in designing a complete system or handling routine and special drilling problems. 80:20 Oil:Water Ratio Invert Mud SystemMuds hot-rolled 16 hrs. @ 350 °F Apparent Viscosity, cp Plastic Viscosity, cp Yield Point, lb /100 sq.ft. Gel Strength ,lb/100 sq.ft. API HT-HP filtration test @ 300 °F 500 psi, ml 75 64 24 2/8 40 68 61 14 2/6 10 See the Safety Data Sheet for more detailed information concerning storage, handling, transportation, disposal and safety requirements. * Base Mud Formula: Exxon Mentor 28, 0.67 bbl; Calcium chloride, brine, 0.17 bbl; Primary emulsifier, 1 gal/bbl; Sec- ondary emulslfier, 0 .7 gal /bbl; Lime hydrate, 3.6 lb /bbl; Organophilic clay, 5.5 lb /bbl; Barite, 229 lb/bbl. Ven-Chem 208™ is packaged in fifty (50) lb multi-wall paper bags with an internal polyethylene liner. Prices for special packaging will be quoted on re- quest. Form Color pH, in water (3% solution) Solubility, in oil Solubility, in water Bulk Density, lb/ft compacted uncompacted Free Flowing Powder Black 6.0-10.0 slightly soluble and highly dispersible down to colloidal size insoluble 47-55 42-50 : : : : : : : VEN-CHEM 208™ GENERAL INFORMATION RECOMMENDATIONS TYPICAL PERFORMANCE PRECAUTIONS Base Mud, No Fluid Loss Additive Base Mud @ 10 lb/bbl Ven-Chem 208™ PACKAGING TYPICAL PROPERTIES The information presented herein is based on the best data available and is believed to be correct. Nothing stated in this information is to be taken as warranty, expressed or implied, re- garding the accuracy of the informationor the use of the product; nor shall anything contained herein be construed to constitute permission or recommendation to practice any invention or know-how owned by enventives, llc, any of its divisions or by others without a license by the owner of the patent, patent application or know-how. REV. No.: 02 REVIEWED/REVISED: 04/16
Transcript of Ven chem 208
Ven-Chem 208™ is an oil-dispersible, powdered organophilic lignite engi-neered for superior filtration control in oil base and invert emulsion mud sys-tems. Ven-Chem 208™ is a chemically modified, organophillic lignite and contains no asphalt or asphalt derivatives. Ven-Chem 208™ provides rapid and effective reduction of excessive fluid loss in diesel oil, mineral oils, and high bottom-hole temperatures. Secondary benefits of Ven-Chem 208™ treatments are improved emulsion stability, improved suspension, and more stable rheological properties.
Ven-Chem 208™ is for use in syn-thetics, oil bases and invert emulsion muds and can be added directly to the system through the hopper. Typ-ical treatment levels are 2-10 lb/bbl depending on the desired level of control, the type of system used, and the bottom hole temperature.
Ven-Chem 208™ can be used in many types of systems, such as synthetics, mineral oil muds, diesel muds, 100% oil phase muds, coring fluids and oil base workover and completion fluids. It is compatible with most types of emulsifiers, oil wet-ting agents and mud viscosifiers in current use.
Ven-Chem 208™ can be used ef-fectively at bottom hole tempera-tures up to 400° F and applications at even hight temperatures are pos-sible through use of a special “slug treatment” technique. Contact en-ventives, LLC. for further information.
Technical assistance is available in designing a complete system or handling routine and special drilling problems.
80:20 Oil:Water Ratio Invert Mud SystemMuds hot-rolled 16 hrs. @ 350 °F
Apparent Viscosity, cp PlasticViscosity, cp YieldPoint, lb /100 sq.ft. GelStrength ,lb/100 sq.ft. APIHT-HP filtration test@ 300 °F 500 psi, ml
7564242/8
40
6861142/6
10
See the Safety Data Sheet for more detailed information concerning storage, handling, transportation, disposal and safety requirements.
* Base Mud Formula: Exxon Mentor 28, 0.67 bbl; Calcium chloride, brine, 0.17 bbl; Primary emulsifier, 1 gal/bbl; Sec-ondary emulslfier, 0 .7 gal /bbl; Lime hydrate, 3.6 lb /bbl; Organophilic clay, 5.5 lb /bbl; Barite, 229 lb/bbl.
Ven-Chem 208™ is packaged in fifty (50) lb multi-wall paper bags with an internal polyethylene liner. Prices for special packaging will be quoted on re-quest.
FormColorpH, in water (3% solution)Solubility, in oil
Solubility, in waterBulk Density, lb/ft compacted uncompacted
Free Flowing PowderBlack6.0-10.0slightly soluble and highly dispersible down to colloidal sizeinsoluble47-55 42-50
::::
:::
VEN-CHEM 208™GENERAL INFORMATIONRECOMMENDATIONS
TYPICAL PERFORMANCE
PRECAUTIONS
Base Mud, No FluidLoss Additive
Base Mud @ 10 lb/bblVen-Chem 208™
PACKAGING
TYPICAL PROPERTIES
The information presented herein is based on the best data available and is believed to be correct. Nothing stated in this information is to be taken as warranty, expressed or implied, re-garding the accuracy of the informationor the use of the product; nor shall anything contained herein be construed to constitute permission or recommendation to practice any invention
or know-how owned by enventives, llc, any of its divisions or by others without a license by the owner of the patent, patent application or know-how.REV. No.: 02 REVIEWED/REVISED: 04/16
