VARIO fountain product range

HX5001B-12

HX5001-12

Underwater Lights

MR16 Series

Light fixture: Stainless steel Waterproof cable connection by silicon rubber seal, for temp. up to 250°C.Protection ： IP68

Can be fitted with MR16 12V 35/50W or LED lamps

HXC-16

Underwater Lights

MR16 Series

Light fixture: Stainless steel cast Waterproof cable connection by silicon rubber seal, for temp. up to 250°C.Protection ： IP68

Can be fitted with MR16 12V 35/50W or LED lamps

Light fixture ： Stainless steelWaterproof cable connection by silicon rubber seal, for temp. up to 250°C.Protection ： IP68

Can be used with PAR36 12V 50/80W lamps

Underwater Lights PAR36 Series

HX5001B-17 HX5001-17

HXB38-1 HXB38-2

With additional glass cover

Underwater Lights PAR38 Series

Light fixture: Stainless steelWaterproof cable connection by silicon rubber seal, for temp. up to 250°C.Protection ： IP68

Can be fitted with PAR38 12V 50/80/100W or LED lamps

Waterproof cable connection by silicon rubber seal, for temp. up to 250°C.Protection ： IP68

Can be fitted with PAR56 12V 300W lamp

Underwater Lights PAR 56 Series

HX98214-6 HX5001-16 Stainless steel (cast) light fixture

Stainless steel light fixture

HX5001-15 Waterproof cable connection by rubber seal, for temp up to 250°C.Protection ： IP68

Can be fitted with PAR56 12V 300W lamps

Stainless steel light fixture (cast)

HX98217-6

Stainless steel light fixture (cast)

Underwater Lights PAR 56 Series

Ø230

145

120

70

35

140

57

Waterproof cable connection by rubber seal, for temp up to 250°C.Protection ： IP68

Can be fitted with PAR56 12V 300W lamps

HXB56-A

Stainless steel light fixture (recessed type)

Underwater Lights PAR 56 Series

HX50R-1

Waterproof cable connection by rubber seal.Protection ： IP68

Can be fitted with 12V 9/27W LED lamps

Stainless steel (cast)

Underwater Lights

Available colours

12V 35W12V 50W

Standard Lamps

PAR38PAR36MR16 PAR56

12V 50W12V 80W

12V 50W12V 100W12V 80W colour220V 50W220V 120W

12V 300W

Application:

• For water features• Submersible use • Long lasting• Available in 12V low voltage for safety Available colours

High intensity LED comparable to incandescent and halogen bulbs

• Better efficiency• Low voltage, energy saving • Life span of 80,000 hrs• Do not require the use of light filter• Available in colour changing RGB

LED Lamps

PAR38MR1612V 1W

12V 4W

Available colours

Comet Nozzles

Material: available in bronze & chrome plated bronzeClear stream jetGood resistance to wind With flow regulatorWater level independent

Material: available in bronze & chrome plated bronzeCone-shaped effectFoamy effect withrich mixture of airWater savingWater level dependent

Cascade Nozzles

Foam Nozzles

Material: chromed plated bronzeFoamy effect Good resistance to wind Water savingWater level dependent

Comet NozzlesZL 15/20/25/40/50/65/80

B

Material: stainless steelClear stream jetGood resistance to wind With flow regulatorWater level independent

Cascade NozzlesSBG 25/40 & SB 25/40/50/80 B

Material: stainless steelCone-shaped effectFoamy effect withrich mixture of airWater savingWater level dependent

Water Bell Nozzles

MN25/40/50 B

Material: stainless steel Transparent water filmAdjustable bell diameterSilent running Water level independent

Cluster Jet Nozzles

OD 25/40/50 B

Material: stainless steelPrecise full streamMulti-stepped water patternEasy to clean Water level independent

Cluster Jet NozzlesFK 25/40 B

Material: stainless steelPrecise full streamMulti-stepped water patternEasy to cleanWater level independent

Cluster Jet Nozzles

FP 25/40/50/65 B

Material: stainless steelPrecise full streamMulti-stepped water patternEasy to cleanWater level independent

Material: stainless steelPrecise full streamMulti-stepped water patternEasy to cleanWater level independent

Cluster Jet Nozzles

FPT 25/40 B

Material: stainless steelPrecise full streamSpinning water displaysWater level independent

Spinning NozzlesCB 25/40/50 B

Material: stainless steelPrecise full streamSpinning water displaysWater level independent

Spinning NozzlesRE 25/40/50 B

Material: stainless steelImpressive water displayDecorative high-grade steel sculptureWater level independent

Sphere NozzlesDO 25/40/50/80 B

Material: stainless steelA mound of aerated water at low levels, the Foam Jet becomes a splashy ,frothy column at high levels.Water level independent

Foam JetBE 25/40 B

Material: stainless steelA fan shaped display, ideal when angled to provide a parabolic spray patternWater level independent

Fan NozzlesFN 20/25/40 B

Material: stainless steelA finger-like fan shaped display, can be used vertically or angled to provide a decorative water displayWater level independent

Finger Jet NozzlesFR 20/25/40 B

Application: for use in conjunction with underwater distributor (PDSO-01) for lights, to provide 12V power for underwater lights.

1. Cover Stainless steel2. Protection IP683. Dimension Φ160*124mm4. Working temp. 0 ~ 45℃ ℃5. Input Voltage AC220V±10%6. Input Current 0.6A7. Output Power AC12V/100VA8. Weight 3kg

Submersible Transformer for Light

BYQ120-12B

Application: for providing 12V power to the underwater lights.

1. Cover Stainless steel2. Protection IP683. Dimension Φ220*170mm4. Working temp 0 ~ 45℃ ℃5. Input Power AC220V±10%6. Input Current 1.5A7. Output Power AC12V/300VA8. Weight 7.3kg

Submersible Transformer for Light

BYQ300-12B

Application: for providing 24V power to the underwater distributor (PQSO-01) for solenoid valves.

1. Cover Stainless steel2. Protection IP683. Dimension Φ220*170mm4. Working temp 0 ~ 45℃ ℃5. Input Power AC220V±10%6. Input Current 1.5A7. Output Power DC24V/200VA8. Weight 7.8kg

Submersible Transformer for Solenoid Valves

BYQ300-24B

Valves & Accessories

Non return valve(Bronze)ZHF40TZHF50TZHF65TZHF80TZHF100T

Y strainer(SS 304)Y15BY20BY25BY32BY40BY50B

Ball valve(SS 304)QF15PBQF20PBQF25PBQF32PBQF40PBQF50PB

Submersible Terminal Box

Stainless steelwaterproof silicon seal, IP68

FXH12-10B FXH-B1 FXH-B2

Application: Transmit digital signals to Jumping Jet Distributor （ TQSO-01 ） via RS485, for the control of Jumping Jet for the various sequences & change in patterns.

1. Cover ABS2. Protection IP203. Dimension 155*110*60mm4. Working temp. 0 ~45℃ ℃5. Working humidity 95%(noncondensation) 6. Installation DIN 35mm (guide rail)7. Input Voltage AC220V8. Output Power 5W9. Max. signal dist. 200m10.Can control 128 Jumping Jets11.Can program 64 sets of patterns12.Can connect to 16 JJ Distributors13.Weight 0.47kg

Jumping Jet ControllerTQMC-01

Jumping Jet DistributorTQSO-02

Application: Received signal via RS485 from Jumping Jet Controller (TQMC-01), and can control 8 individual Jumping Jet separately.

1. Cover ABS2. Protection IP203. Dimension 155*110*60 mm4. Working temp. 0 ~45℃ ℃5. Working humidity 95%(non-condensation)6. Installation DIN 35mm (guide rail)7. Input Voltage DC5V±2%8. Input Current 0.1A9. Can control 8 Jumping Jets10.Max. signal dist. 200m11.Manual control Panel Switch 12. Weight 0.45kg

Application: Transmit digital signals to Swivel Jet Distributor （ YBSO-01 ） via RS485, for the control of Swivel Jet for the various sequences & change in patterns.

1. Cover ABS2. Protection IP203. Dimension 155*110*60mm4. Working temp. 0 ~45℃ ℃5. Working humidity 95%(non condensation)6. Installation DIN 35mm (guide rail)7. Input Voltage AC220V8. Output Power 5W9. Max. signal dist. 200m10.Can control 32 nos. Swivel Jets11.Can program 64 sets of patterns12.Can connect 8 Swivel Jet Distributors13.Weight 0.47kg

Swivel Jet Controller

YBMC-01

Application: Received signal via RS485 from Swivel Jet Controller (YBMC-01), and can control 4 individual Swivel Jet separately.

1. Cover ABS 2. Protection IP203. Dimension 155*110*60mm4. Working Temp. 0 ~45℃ ℃5. Working humidity 95%(non condensation)6. Installation DIN 35mm (guide rail)7. Input Voltage DC5V±2% 8. Input Current 0.1A9. Can control 4 Swivel Jets10.Max. signal dist. 200m 11.Swivel positions 7 points,

±60°,±45° ±30 °,0°12. Weight 0.45kg

Swivel Jet Distributor

YBSO-01

Application: Transmit digital signals to Shooter Jet Distributor （ PQSO-01 ） via RS485, for the control of Shooter Jet for the various sequences & change in patterns.

1. Cover ABS2. Protection IP203. Dimension 155*110*60mm4. Working Temp. 0 ~ 45℃ ℃5. Working humidity 95% (non condensation)6. Installation DIN 35mm (guide rail)7. Input Voltage AC220V8. Output Power 5W9. Max. signal dist. 200m10.Can control 128 Shooter Jets11.Can program 64 sets of patterns12.Can connect 16 Shooter Jet Distributors13.Weight 0.47kg

Shooter Jet Controller

PQMC-01

Shooter Jet Distributor

PQSO-02

Application: Received signal via RS485 from Shooter Jet Controller (PQMC-01), and can control 8 individual Shooter Jet separately.

1. Cover Stainless steel2. Protection IP683. Dimension Φ220*124mm4. Working Temp. 0 ~45℃ ℃5. Input Voltage DC24V±10%6. Output Voltage DC24V (each

load 25W)7. Can control 8 Shooter Jets8. Max. signal dist. 200m9. Weight 2.45kg

Application: Transmit digital signals to Underwater Light Distributor （ PDSO-01 ） via RS485, for the control of lights for the various sequences & change in patterns.

1. Cover ABS2. Protection IP203. Dimension Φ155*110*60mm4. Working Temp. 0 ~ 45℃ ℃5. Working Humidity 95% (Non condensation)6. Installation DIN 35mm (rail guide)7. Input Voltage AC220V8. Output Power 5W9. Max. signal dist. 200m10.Can control 128 lights11.Can program 64 sets of patterns12.Can connect 16 Light Distributors13.Weight 0.47kg

Underwater Light Controller

PDMC-01

Underwater Light Distributor

PDSO-02

Application: Received signal via RS485 from Underwater Light Controller (PDMC-01), and can control 8 individual lights separately.

1. Cover Stainless steel2. Protection IP683. Dimension Φ220*124mm4. Working Temp. 0 ~45℃ ℃5. Input Voltage AC220V±10%6. Input Current 4A7. Output Voltage AC220V each connection 100W8. Can control 8 lights9. Max. signal dist. 200m10.Weight 2.7kg

Control Panel

The control panels are designed based on the following principles: control reliability, economy, energy conservation, simple installation & maintenance. The control panels comply with all necessary safety and security precautions, yet fulfilling the control function for the water feature system requirement. The protection devices comprise circuit breakers, overloading and leakage protection etc., using the most advanced microcomputer monolithic integrated circuit control. Control computers or PLC can be linked to the control panels via RS485 to provide reliable feedbacks and facilitates control. The control components used are of good quality yet affordable, contributing to energy conservation. The standard control cabinet uses quality and strong structures thus providing easy installation and maintenance.

Shooter Jet Unit

PQ25/40/50

The Shooter Jet unit comprises directional single jet nozzle, flow straightener, ball valve (for flow control) and rapid action solenoid valve. Each individual nozzle can be adjusted up to 15 deg tilt, thus multiple nozzles assembly can create various water pattern and effects. The flow straightener helps to achieve a clear stream jet effect, even for high fountain spray with little splash. The ball valve can be adjusted manually to regulate to the required fountain spray height. The submersible rapid action solenoid valve can achieve an activation speed of 0.1 sec. With help of the Shooter Jet Controller, a series of Shooter Jets can create the infamous ‘wave’ effect, a wide variation of sequencing and patterns, and be synchronised with music.

Power rating (per jet) AC 50V/100WPower rating for pump 220V / 50Hz / 750WCurrent rating 5.6APower rating for light AC 12V/50WProtection for light IP68Jet diameter 16mmWater level 300~400mmNozzle swivel range 45~85°Material Stainless steelWeight 47Kg

Jumping Jet

TQ40-16

Power rating for pump 220V-50Hz/750WCurrent rating 5.6APower rating for lights AC 12V/50WProtection for light 　　 IP68Jet diameter 10.5mmWater level 180-250mmNozzle swivel range 45-80°Material Stainless steelWeight 17Kg

Laminar JetGLQ20-11

Connection G 11/2“ （ male connection ）Nozzle inlet Φ40 mmType of movement swivelRotation / input pulse ratio 360°/ 6800PMax. output rotational speed 20r/min Max. output torque 30N*mPosition accuracy ±0.5°Max. output pressure 0.3MPa Weight 13.2Kg Working Temp. 0 - 40 ℃Input Voltage 40V ±10 ％ DCType of drive precision movement by stepper motor Type of control Digital pulse type Control Voltage 5VDCControl pulse width >10μSProtection IP68 （ max. depth ≤1m ）Insulation standard BSwivel locator homing capability

Swivel JetSKYB40-02

The Automatic Water Refill System provides a ready water supply in fountain pools. When low water level is detected, a signal is transmitted to the solenoid valve at the water inlet supply pipe to open to allow for refilling. Once the water level has reached the max. level, another signal is transmitted to shut the solenoid valve to interrupt the refilling of water.

Automatic Water Refill

System ZDBS-01

The Water Level Control System maintains a constant water level in the fountain pool. When high water level is detected due to excessive storm water or whatever reasons, a signal is transmitted to the solenoid valve or sump pump to discharge excess water. When low water level is detected, a signal is transmitted to the main control panel to cut off all electrical supply.

Water Level

Control System

YWKZ-01

The Low Water Level Protection System prevents damage to the submersible pumps from dry-running. For whatever reasons when the water level falls below the low water level indicator, a signal is transmitted to shut off all submersible pumps.

Low Water Level Protection System

DSWBH-01