1-1/2” BS 336 male

Valves andRiserEquipment

www.naffco.com2

NAFFCO FZCO is among the world’s leading manufacturers and suppliers of top-tier firefighting equipment, fire protection systems, fire alarms, security and safety engineering systems worldwide. Since its humble beginnings, NAFFCO has grown from its headquarters in Dubai, UAE to expand to serving over 100 countries around the world.

One Stop Shopping for All Your Fire Safety and Security Needs

Today’s companies recognize the importance and convenience of having multiple safety services available under one roof, a “one-stop shopping” source for all types of fire protection systems. As the undisputed leader in

An Introduction to NAFFCO

firefighting technology and fire safety solutions, NAFFCO has worked in both the private and government sectors, as well as manufacturing plants, hospitals, stadiums, malls and other organizational projects, delivering comprehensive fire safety and engineering solutions.

NAFFCO is associated with globally renowned international companies in the fire protection industry such as Esser, Secutron, Megalights, Evax, Fike, Central, Shield, Mueller, Giacomini, RB Pumps, Bombas, Ideal Pumps, Joslyn Pumps, Peerless Pumps.

At NAFFCO we are passionate about sustaining, upgrading and improving any means of safety, by having over 2 million square foot of manufacturing space, over 450 engineers, and following all the latest technology available. We live by our passion, the passion to protect.

www.naffco.com 3

LANDING VALVESGENERAL SPECIFICATIONSApplicable Standards - BS 5041 - 1 :1987

Body - Copper Alloy to BS EN 1982

Hand Wheel - Cast Iron to BSEN 1561

Outlet - Female Instantaneous to BS 336 : 2010

Working Pressure - 15 Bar (Max)

Test Pressure - 22.5 Bar

OBLIQUE LANDING VALVE

SPECIFICATIONS

Model No NDR 098, Flanged Inlet, DN50 (to BS 4504 part 2:1974)

Model No NDR 097, 2 ½" Screw Thread Inlet to BS21

RIGHT ANGLE LANDING VALVE

SPECIFICATIONS

Model No NDR 106, Flanged Inlet, DN50 (to BS 4504 part 2:1974)

Model No NDR 105, 2 ½" Screw Thread Inlet to BS21

STRAIGHT THROUGH LANDING VALVE (Horizontal Type)

SPECIFICATIONS

Model No NDR 108, Flanged Inlet, DN50 (to BS 4504 part 2:1974)

Model No NDR 107, 2 ½" Screw Thread Inlet to BS21

Landing Valves are used for fighting fire with water and accordingly mounted in fire hydrant systems at Internal or External places. The landing valves are sometimes also referred to as internal hydrants because they are usually fitted inside the buildings for wet hydrant systems.

* Kitemark & LPCB approved landing valves available upon request.

* Kitemark & LPCB approved landing valves available upon request.

www.naffco.com4

BIB NOSE TYPE LANDING VALVE

SPECIFICATIONS

Model No NDR 110, Flanged Inlet, DN50 (to BS 4504 part 2:1974)

Model No NDR 109, 2 ½" Screw Thread Inlet to BS21

SPECIFICATIONS

Model No NDR 120 1.5" Ø, Female NPT Inlet & Outlet

Model No NDR 121 2.5" Ø, Female NPT Inlet & Outlet

Angle Hose Valve Drain 1.5" & 2.5"

Pressure Rating 300 PSI

Material Cast Brass

Hand Wheel Cast Iron

Finish Standard Rough Brass / Polished Brass

Optional Bright Chrome Plated

PRESSURE REDUCING LANDING VALVE

ANGLE HOSE VALVE

"E" TYPE PRESSURE REGULATING VALVEGENERAL SPECIFICATIONSApplicable Stand-ards

- BS 5041 - 1:1987

Body - Copper Alloy to BS EN 1982

Hand Wheel - Cast Iron to BS EN 1561

Outlet - Female Instantaneous to BS 336 : 2010

Working Pressure - 20 Bar (Max)

Test Pressure - 30 Bar

NAFFCO's Pressure reducing oblique landing valves are suitable for installation on wet risers in buildings for fire fighting purposes, permanently charged with water from a pressurized supply.These landing valves are pressure reducing type designed to provide a range of outlet pressure (4 bar - 12 bar).The landing valves are classified under high pressure and are suitable for use at nominal inlet pressure upto 20 bar and for working temperature range from 0 °C to 38 °C.

The Angle hose valve is manufactured as per NFPA 13 and most suitable for fire protection service outlet or with a hose rack assembly.

* Kitemark approved landing valves available upon request.

www.naffco.com 5

SPECIFICATIONS

Model No NSC 95AThread Type Female NPT

Body Cast BrassInlet 2½" Swivel Type

Outlet 4" StraightOptional Cap & Chain / Base plate for Clapper Inlet

SPECIFICATIONS

Model No NWR 103, ¾" Ø InletModel No NWR 104, 1" Ø Inlet

Thread Type Male BSPBody Brass

Test Pressure 350 PSI

BREECHING INLETS

SINGLE CLAPPER TWO WAY INLETS

AIR RELEASE VALVE

The clapper design allows for one or both inlets to be pressurized during operation and provide supplementary water supply connection for automatic sprinkler systems as per NFPA13

Air release valves are designed to vent entrained air that collects at high points in the riser.

SPECIFICATIONS

Model No NBI 095, 2 - Way Breeching Inlet (Manufactured & comply to BS 5041 - 3 - 1975)Body Spheroidal Graphite Cast Iron (Ductile Iron) to BS EN 1563:1997Inlet 2 nos. Male instantaneous coupling with NRV to BS 336:2010

Outlet 4" FlangeWorking Pressure 10 Bar

Test Pressure 20 Bar

SPECIFICATIONS

Model No NBI 115 4 - Way Breeching Inlet (Manufactured & comply to BS 5041 - 3 - 1975)Body Spheroidal Graphite Cast Iron (Ductile Iron) to BS EN 1563:1997Inlet 4 no's Male instantaneous coupling with NRV to BS 336:2010

Outlet 6" FlangeWorking Pressure 10 Bar

Test Pressure 20 Bar

NAFFCO Breeching Inlets are suitable for Installation on dry risers only, In a building for fire fighting purposes, fitted with inlet connection at fire brigade access level and outlet connection at specified points, which is normally dry but capable of being charged with water by pumping from the service appliances.

The Breeching inlets are manufactured to comply BS 5041 Part - 3: 1975 standard comprising of Male Instantaneous connections complying with BS 336:2010, drain valves PN16 rated and non - return valves.

*Kitemark & LPCB approved Breeching Inlet available upon request.

*Kitemark & LPCB approved Breeching Inlet available upon request.

www.naffco.com6

SPECIFICATIONS

Model No NBC 096, 2 - Way Breeching Inlet Cabinet

Model No NBC 116, 4 - Way Breeching Inlet Cabinet

CabinetElectro - galvanized Steel, Painted with

Electrostatic Powder Coating

Dimensions400 X 600 X 300 - for 2 way ; 600 X 600 X 300 - for 4 way

Glass Wire Mesh Reinforcement

Installation Recess or Surface Mounted

OptionalStainless Steel doors & frames available upon

request

SPECIFICATIONS

Model No NF750

Model No 1½" Ø X 30M Hose / 2½" Ø X 30 Meter

CabinetElectro - galvanized Steel, Painted with

Electrostatic Powder Coating

Dimensions1½" X 30m - 750 X 700 X 200; 2½" X 30m - 850 X 800 X 250

Glass Plain or Wire Mesh Reinforcement

Installation Recess or Surface Mounted

OptionalCabinet material of SS Brush or Mirror Finish

available on request

SPECIFICATIONS

Model No. Type Dimension Body

NHR 250 Swinging Wall Mounted2½" X 30

MeterMild Steel

Painted with Electrostatic

Powder Coating

NHR 250A Swinging Valve Mounted2½" X 30

Meter

NHR 150 Swinging Wall Mounted1½" X 30

Meter

NHR 150A Swinging Valve Mounted1½" X 30

Meter

SPECIFICATIONS

Model No NWR 081

BodyElectro - galvanized Steel, Painted with Elec-

trostatic Powder Coating

Hose 2½" Ø x 30m Hose

Type Swinging

BREECHING INLET CABINET

FIRE HOSE RACK CABINET

FIRE HOSE RACK

FIRE HOSE CRADLE

NAFFCO Breeching Inlet Cabinet is designed to accomodate 4" & 6" Outlet Breeching inlets. These

NAFFCO Fire hose rack cabinet is designed to accomodate complete assembly of fire hose rack. These

NAFFCO Fire hose rack is located inside buildings at the wet or dry riser outlet. It features a rack in which hangs the lay flat fire hose (30m). An automatic release

Fire hose is rolled and stored in a swinging cradle designed for easy access. These cradles are Wall mountable and Cabinet mountable.

Cabinets have either solid or wired glass door and are available in surface or recesses mounting version.

Cabinets have either solid or wired glass door and are available in surface or recesses mounting version.

mechanism allows water to flow through the hose after removal of the hose and nozzle.

*LPCB approved Breeching Inlet Cabinets available upon request.

*UL/FM approved 1½" & FM approved 2½" fire hose rack available upon request.

www.naffco.com 7

SPECIFICATIONS

Model No NF FB320/WKM

Body Polyamide tip with Aluminum

Alloy inlet

Inlet SizeMale Instantaneous coupling to

BS 336Working Pressure 16 Bar

Flow Control Shut - Jet & Spray

SPECIFICATIONS

Model No. NFL - 13SPQ, 1½" Ø

Flow Rate 490LPM @ 7 Bar

Model No. NFL - 13BPQ, 2½" Ø

Flow Rate 660 - 1020LPM @ 7 Bar

Body Aluminum Alloy, Anodised

Inlet Male Instantaneous to BS 336

Range 40-45M

Optional1. NST threaded Inlet available upon request2. Bronze construction Nozzles available upon request

SPECIFICATIONS

Model No NWR100/NWR 100AL

Body Copper Alloy/Aluminum

Inlet Size 2½" ØFlow Rate 120Gpm@7 Bar

Model No. NWR100A

Body Copper Alloy

Inlet Size 1½ ØFlow Rate 50 Gpm @ 7 Bar

Model No. NWR101P

Body Plastic

Inlet Size 1½" ØRange 15 M

SPECIFICATIONS

Model No NF WC 380A

Flow Rate 380 LPM@7 Bar

Body Cast Bronze with Chrome Finish

Inlet 1½" Ø, NH Female Swivel Inlet

JET & SPRAY NOZZLE

WATER COMBINATION NOZZLES

DIFFUSER NOZZLE

WATER CURTAIN NOZZLE

This durable, plastic nozzle produces a strong, concentrated jet of water that can fight fires in a most

These kinds of nozzles have been the trend in the Fire Service for several years to utilize greater water flow for initial attack. The most popular water delivery fire

Diffuser nozzle has an adjustable annular orifice which enables the jet of water to be controlled from shut - off

Water Curtain nozzle produces a strong, rain type pattern of water that can cool the surrounding areas and structures against flame spread.

efficient way. Yet it is quickly and easily adjustable from a jet to a diffused spray, or a complete shut off.

hoses are 1½" or 2½" with nozzle which flows from 490 to 1,020 LPM. It is also very convenient to use completed shut - off ball valve.

to small jet through to large jet then to spray pattern by turning of the rubber sleeve.

NF FB320/WKM

NF 13SPQ

CAT

.NO

.NF/

VRE/

01/1

5

In line with NAFFCO policy for continuous product development,NAFFCO has the right to change specifications without prior notice.

NAFFCO FZCOWorld HeadquartersDubai, United Arab EmiratesEmail: info@naffco.comwww.naffco.com

Serving Over 100 Countries WorldwideeeedededewidewidewidwiddwiddwidwldwrldwrldorldorldWorlWorWorWoWoWos Ws Wes Wes Wes iesriestrietrientrientrintruntuntounounounouCouCoCoCoCoCC0 C0 C00000000011