User manual for icam 16

34

description

 

Transcript of User manual for icam 16

Page 1: User manual for icam 16
Page 2: User manual for icam 16

1

FFFForewordorewordorewordorewordThank you for buying this digital camera. Please read this manual carefully beforeyou use and put this manual at a safe place for the reference in future.The content contained in this manual is referred to the latest information whenpreparing this manual. The screen display and illustration used in it is for thepurposing of elaborating the operation of the camera in a detailed and clearmanner. It may differ slightly from those of the camera that your use due to thetechnical development and different production batch.

EEEExplanationxplanationxplanationxplanation

Please use this camera according to the following orders.

Attention: For the new memory card or card that is used in other digital camera/digital video camera,

please format them with this video camera if they are used on the video camera. Please backup the

important data on other important mediums such as floppy disk, hard disk and CD-ROM.

IIII

nstructionnstructionnstructionnstruction forforforfor useuseuseuseThis video camera can use SD memory card and MMC card (multi-mediamemory card).The SD memory card has the write-protect switch that can prevent that the image filesare deleted or formatted.

Check the powerof the videocamera

Inset and format thememory card

Videorecording/take photo

Install thedrivingprogram

Connect thecomputer

Page 3: User manual for icam 16

2

Push the switch of the SD memory card to the bottom and the data will beprotected. Push the switch of the SD memory card to the top and the write-protectwill be canceled. Please push the switch on the SD memory card to the top beforetaking photo.Instruction for use of memory card● If the memory card that is bough newly or there is data in the memory card that

the video camera cannot recognize or pictures that are taken by other recorder,please ensure that the memory card should be formatted first.

● Please switch off the power of the video camera before inserting or taking outthe memory card.

● The performance of the memory card will be reduced after many times of use. Ifits performance is reduced, please buy new memory card.

● As the memory card is a precise electronic device, please do not bend it and itshould avoid being pressed by heavy load or dropping.

● Please do not place the memory card in the environment with strong electricfield or magnetic field such as near the speaker or receiver.

● Please do not use or place the memory at the too hot or cold environment.● Please keep the memory card clean, from touching any liquid. If it touches the

liquid, please wipe it with soft cloth.● When the memory card is not in use, please put it into the care sleeve.● Please notice that the memory card will become hot after long time of use. This

condition is normal.● Please use the memory card that is used in other digital video camera or

camera. If they are intended to be used in this camera, please format it with thevideo camera.

● Please do not use memory card that is formatted by other digital video camerasor the memory card readers.

● If one of the following conditions occurs to the memory card, the recorded datamay be damaged.The memory card is not used properly.The power is cut or the memory card is taken out when the recording, deletion

Metal pin ofmemory card

Write-protectswitch

Page 4: User manual for icam 16

3

(formatting) or reading.● It is suggested that the important data should be backuped on other medium

such as floppy disk, hard disk and CD-ROM etc.Maintenance of video camera

It should be stored in a dry place when it is not in use and the battery must be

taken out.

● When it is in use, the wrist strap should be always used to avoid dropping.● Use proper protective sleeve to avoid scratching the lens and display screen.● To clean the surface of the lens, the dust on the surface should be blown away

and wipe the lens slightly with the cloth or paper tissue that is used for cleaningthe optical equipment. If it is necessary, please use the lens cleaner. Do notuse organic solvent to clean the video camera.

● Do not touch the surface of the lens with hand.

Page 5: User manual for icam 16

4

CCCContentontentontentontentSystem requirement............................................................................................................ 5Function and feature........................................................................................................... 5Accessories........................................................................................................................ 5Appearance instruction....................................................................................................... 6Function of keys and indicator light of video camera......................................................... 8Inception of use.................................................................................................................. 9

Installation of battery.............................................................................................. 9Charge the lithium battery.......................................................................................9Install the SD/MMC memory card........................................................................ 10Open the screen.................................................................................................... 10Switch on..............................................................................................................10Mode switching.................................................................................................... 10Video recording.................................................................................................... 11Taking photo......................................................................................................... 11Sound recording....................................................................................................11Playback............................................................................................................... 11TV output..............................................................................................................11Direct printing.......................................................................................................11Switch off............................................................................................................. 11Menu setting......................................................................................................... 12Set date and time...................................................................................................12Connect the computer........................................................................................... 12

Advanced operation..........................................................................................................13Shooting mode......................................................................................................13Sound recording mode.......................................................................................... 18Playback mode......................................................................................................19

Specification.....................................................................................................................30Frequently asked questions...............................................................................................31

Page 6: User manual for icam 16

5

SystemSystemSystemSystem requirementrequirementrequirementrequirementWhen this digital video camera is under operation or in use, please refer to theminimum requirement of computer for use of the video camera we stronglyrecommend that you use the better computer equipment to operate the videocamera to realize the best performance. The minimum system requirement isshown as the following:

System requirementOperating system Microsoft Windows 2000,XP,VISTACentral processor Higher than Intel PIII667 or CPOU with equal performanceEMS memory Over 128 MBSound card anddisplay card

The sound card and display card support the DirectX8 orhigher version.

CD-ROM Over 4 speeds.Hard disk More than 1 GB available spaceOthers One standard USB 1.1 or USB 2.0 port

FFFFunctionunctionunctionunction andandandand featurefeaturefeaturefeatureThis video camera has many types of functions and features:� Digital video camera� Digital camera (5 million pixel)� Recording pen� Removable disk� Camera� 8 times digital zoom

AccessoriesAccessoriesAccessoriesAccessoriesThe following main accessories may be seen when the package of the video

camera is opened.

USB connecting cable installation CD Instruction Manual TV cable

Page 7: User manual for icam 16

6

AAAAppearanceppearanceppearanceppearance instructioninstructioninstructioninstruction

Screen display

Recordingkey

Mode indicator light

Mode button

USBportTV port

Zoom key Camera keyHorn

Menu keyQuick delete key

Page 8: User manual for icam 16

7

Power key

Right key

Upper key

Bottom keyLeft key

OK key

Installation hole for tripod Battery cover

Page 9: User manual for icam 16

8

FFFFunctionunctionunctionunction ofofofof keyskeyskeyskeys andandandand indicatorindicatorindicatorindicator lightlightlightlight ofofofof videovideovideovideo cameracameracameracameraKeyKeyKeyKey pressingpressingpressingpressing/indicator/indicator/indicator/indicatorlightlightlightlight

ShootingShootingShootingShooting modemodemodemode functionfunctionfunctionfunction PlaybackPlaybackPlaybackPlayback modemodemodemode functionfunctionfunctionfunction

Power key Switch off Switch offShooting key Shooting。 /Recording key Record image and sound /

W key The digital zoom zoomsout.

Photo zooms in

T keyThe digital zoom zoomsout. Photo zooms in

Left keyNormal operation, switchon or off the fill lightMenu operation; select left

Normal operation: select theprevious filemenu operation; select left

Right keyNormal operation: switchover to self portraitMenu operation: select left

Normal operation: select the nextfiles.Menu operation: select right

Up key Menu operation: select up Normal operation: display directprint the menu.

Down keyNormal operation: switchover the screen displayMenu operation: select

Menu operation: select down

Wriststrip hole

Lens

microphone

Automatic camera indicating light

LED filllight

Page 10: User manual for icam 16

9

down

Playback key Switch over to playbackmode Switch over to shooting mode

OK key Menu operation:confirmation

Normal operation: play the videoMenu operation: confirmation

Menu key Open/close the menu Open/close the menu

Delete key

Enter playback and displaythe last files and theconfirmation menu fordeletion

Display the confirmation menu fordeletion

Mode indicatorlight

The indicator light forshooting or recording is on

The indicator light for playback ison.

Self portraitindicator light

Flashing during thecountdown process duringself portrait

/

Note: the indicator light for playback is used as the charging indicator light during the

process of charging of lithium battery.

IIIInceptionnceptionnceptionnception ofofofof useuseuseuse

IIIInstallationnstallationnstallationnstallation ofofofof batterybatterybatterybatteryThis video camera uses four AAA alkaline batteries. When the battery is changed, thepower of the video camera should be switched off. Open the battery cover; install thebattery according to the hint for battery polarities beside the battery compartment. Thenclose the battery cover.

CCCChargehargehargeharge thethethethe lithiumlithiumlithiumlithium batterybatterybatterybatteryPut the lithium battery into the battery compartment and switch off the video camera(when charging the battery, the camera must be switched off). Use the USB wire toconnect the USB port of the computer or USB power supply to charge the battery. Duringthe processing of charging, the indicator light for playback/charging is on. It will be off

Page 11: User manual for icam 16

10

after the battery is fully charged.

IIIInstallnstallnstallnstall thethethethe SD/MMCSD/MMCSD/MMCSD/MMC memorymemorymemorymemory cardcardcardcardOpen the battery cover; insert the metal pin of SD/MMC memory card into the cardslot with the pin towards inside according to the hints beside the card slot. To takeout the memory card, press the SD/MMC downward and take the card out.

────────────────────────────────────

Note: � Please switch off the power of the video camera before changing thememory card.

� Please follow the correct direction to insert the card. There is no need toapply large force to insert the card to avoid the damage to the card or partof the video camera. If this does not work, please check whether thedirection is correct.� If the memory card is used for the first time, or the card is used in othervideo camera, please format the memory card first.

────────────────────────────────────

OpenOpenOpenOpen thethethethe screenscreenscreenscreenOpen the LCD outwards and turn the LCD display screen towards the user. You

can rotate the screen at your option.

SSSSwitchwitchwitchwitch ononononPress down the power key and release it, the video camera starts.

MMMModeodeodeode switchingswitchingswitchingswitchingThe video will perform recording, sound recording or playback mode after the videocamera is switched on according to the position of the mode rotary button. After thevideo camera is switched to the mode, the corresponding indicator light will be on.

Page 12: User manual for icam 16

11

VVVVideoideoideoideo recordingrecordingrecordingrecordingPress the recording key to begin the video recording under the shooting mode andthe video recording stops by pressing this key again.

TTTTakingakingakingaking photophotophotophotoPress the shooting key to take photos under the shooting mode.Note: press during the process of video recording

SSSSoundoundoundound recordingrecordingrecordingrecordingPress the recording key to perform sound recording under the recording mode.

PPPPlaybacklaybacklaybacklaybackThe photos can be browsed or play the video or the sound recorded by this camerain the playback mode.Browse photo: use left key or right key to select the photos, zooming key to zoomin the photo. Press up/down/left/right key to move the photo after it is zoomed in.Play a movie: Use left or right key to select the movie to be played and press theOK key to play it; pressing the OK key again to stop playing. During the process ofplaying, pressing up key can pause the playing and pressing this key again willresume the playing.

TVTVTVTV outputoutputoutputoutputIf the image or the sound needed to output to the TV, please insert the commonterminal of the TV cable to the TV port on the video camera. The yellow port isconnected with the video input port of the video equipment; the red/white port isconnected with the sound input port of the video equipment. Note: please stop thevideo recording or sound recording or playing before connecting or taking out theTV cable.

DDDDirectirectirectirect printingprintingprintingprintingThis video camera can use the USB cable to connect the printer supportingPictBridge standard printer (the printer has a mark) to print the photos or images inthe video camera directly.Select the photo to be printed, and press up key or select the “print” menu throughmenu, connect the printer with the USB cable and press Ok key to print.

SSSSwitchwitchwitchwitch offoffoffoffPress the power key to switch the video camera under the power-on state.If the video camera is under the idle state and the video is not operated exceedingthe set time for automatic switching off (1 minute/3 minutes/5 minutes), the videocamera will switch off automatically to save the power.

Page 13: User manual for icam 16

12

MMMMenuenuenuenu settingsettingsettingsettingUnder the modes of shooting, video recording and playback, press the menu key toopen the menu, press up/down/left/right key to select the menu, and press Ok keyto enter the submenu. When selecting the menu, the background of the selectedmenu will be highlighted.

▲ Shooting menu ▲setting menu ▲ playback menu

SSSSetetetet datedatedatedate andandandand timetimetimetimePress the menu key to open the menu, then press left or right key to set the menu.Press down key to select the “date and time” menu, and then press the OK key toenter the setting window.

In the setting window, press left or right key to select the items to be adjusted (dateand time), the background of the selected items is displayed in sky blue. Thenpress up key or down key to make adjustment, press the confirmation key to makeconfirmation or press the menu key to cancel the setting and return. At last, pressthe menu key to exit the setting mode.

CCCConnectonnectonnectonnect thethethethe computercomputercomputercomputerPlease install the driving program of the video camera using the installation CDbefore connecting the computer.Switch on the power of the video camera first, use USB cable to connect the videocamera to the available USB port of computer. Select the removable hard disk orcamera of the USB mode and the video camera will enter the removable hard diskor camera mode correspondingly.

Page 14: User manual for icam 16

13

AdvancedAdvancedAdvancedAdvanced operationoperationoperationoperation

SSSShootinghootinghootinghooting modemodemodemodeEnter the shooting mode through the mode switching key after switching on.Start the video recording by pressing the recording key, pressing this key againstops the recording. Pressing the shooting key can take photos.Press T key or W key to perform digital zoom.Press the right key to switch to the 2s automatic shooting or 10s automaticshooting.Automatic shooting mode: press the shooting key to begin the countdown, onepicture is taken after 2 or 10 seconds are delayed.Use LED fill light: the left key can be used to open or close the fill light (the fill lightcannot be used in the playback mode)When the video camera is in idle state, pressing the left key can make selectionamong three types of screen display naming close the icon, close the screen andnormal display.────────────────────────────────────

Note: � Please hold the video camera firmly when the video recording isperformed, it is better to place it on the tripod and other supports to makeclear photos.�The BUSY light will be on after taking photos by pressing the shutterbutton. The video camera should not be moved at this moment. It can bemoved after the BUSY light is off to prevent the vague picture.� Do not press the shooting key during the process of video recording, theshooting key does not function in this process.

────────────────────────────────────

◆ The information displayed on the screen during the shooting mode

Page 15: User manual for icam 16

14

IconName oficon

Description

1111 Shooting icon Indicating that it is the shooting mode

2222

Number of

photos to be

taken

Indicating the remaining number of

photos to be taken

3333Recording

time

Indicating the remaining time forrecording at the idle state and indicatingthe recorded time at the recording state.

4444Recording

icon

Indicating that the mode is the shootingmode

5555 Video format Indicating the resolution of current video

6666 Fill light Indicating that the fill light is open

7777 Cardindicates that the memory card is

inserted and shows that the SD cardbeing used under the write-protect state.

8888 Directive for Indicating the current zooming times

Page 16: User manual for icam 16

15

zooming

9999Exposure

compensation

Indicating the currently set exposure

value

10101010 Metering mode Indicating the current metering mode

11111111 White balanceIndicating the current white balancesetting

12121212Quantity of

electricity

Indicating the current battery state, itindicates that the battery is run out whenit becomes red and the video camerawill switch off automatically.

13131313Automatic

shooting icon

indicates it switches to the 10sautomatic shooting mode andindicates it switches to the 2s automaticshooting mode.

14141414 Image qualityIndicating the image quality that is

selected currently

15151515Size of

picture

Indicating the resolution of the current

picture

◆ Menu setting

Press the menu key to open the main menu of video recording and press left orright key to select the menu, press OK key to enter the submenu. In the submenu,press the menu key or OK key to return to the main menu, press left or right key tomake selection, and press OK key to make confirmation. After returning to the mainmenu, pressing the menu key can exit the menu.When selecting the menu, the selected menu will be highlighted.Options of the shooting menu:

MMMMainainainain menumenumenumenu SSSSubmenuubmenuubmenuubmenu DescriptionDescriptionDescriptionDescription

Image size

4624x3472 Resolution of 16 million pixel

2592x1944 Resolution of 5 million pixel

2048x1536 Resolution of 3 million pixel

Page 17: User manual for icam 16

16

1280x1024 Resolution of 1.3 million pixel

Image qualitySuper Best image qualityGood Better image qualityNormal Common image quality

Metering mode

Center meteringMultiple points

meteringPoint metering

White balance

Automatic Use automatic white balance.suitable for many conditions

Daylight Suitable for the day light environmentCloudy day Suitable for cloudy dayFluorescent

lampSuitable the environment withfluorescent lamp as the light source

Osram lamp Suitable for environment with osramlamp as the light source

Exposure / Use the left or right key to adjust theexposure compensation

Shooting mode

Off Use the common single shootingmode

2s Use the 2s delaying automaticshooting mode

10s Use the 10s delaying automaticshooting mode

ContinuousShots

Continuous shooting

Special effect

Normal Normal effectBlack and white Black and white effectRepristination Nostalgic effect

Negative Film effectRed Red effectGreen Green effectBlue Blue effect

Video format640X480 High resolution format320X240 Low resolution format

Page 18: User manual for icam 16

17

Frame ratehigh 30fpsLow 15fps

Note: When entering the exposure submenu to adjust the exposurecompensation, use left or right key to adjust the value of exposurecompensation and the brightness of the screen will also change. Press Okkey to return to main menu after the setting ends and press the menu key tocancel the setting.Setting menuWhether under the video recording mode, shooting mode or playback mode,pressing the left or the right key can enter the main setting menu after opening themenu by pressing the menu key. Then press up/down/left/right key to select themenu and press Ok key to enter submenu. In the submenu, press menu key or Okkey to return to the main menu, and press up or down key for selection, press Okkey to make confirmation. Press the menu key to exit the menu after returning tothe main menu.The selected menu will be highlighted when selecting the menu.

MMMMainainainain menumenumenumenu SSSSubmenuubmenuubmenuubmenu DDDDescriptionescriptionescriptionescription

Sound

Shutter button Open/closeSound ofswitching None /1/2/3

Key sound Open/closeVolume 0/1/2/3

Automaticplayback

Close Without playback after taking photo

1seond Playback for 1 second after takingphoto

3 seconds Playback for 3 seconds after takingphoto

Powerfrequency

50Hz Set with 50Hz light frequency60Hz Set with 60Hz light frequency

Automaticswitch off

1 minute Switch off automatically if the idlestate last 1 minute.

3 minutes Switch off automatically if the idlestate last 3 minutes.

Page 19: User manual for icam 16

18

5 minutesSwitch off automatically if the idlestate last 5 minutes.

Date and time / Set the date, time and date format

Language

English The menu language is English.

S. Chinese The menu language is simplifiedChinese

T. Chinese The menu language isChinese-traditional

Setting of videooutput

NTSC Set NTSC television systemPAL Set the PAL television system

USB mode

Portable harddrive

Used as the portable hard drive

Camera Used as the cameraSIDC Connect the printer

Startup Picture

Close Without startup picture

System The startup picture attached to thesystem

Customize Customize the startup pictureFormat Yes/No Format the memory card

Restore FactoryDefaults

Yes/No Restore Factory Defaults

When setting the date and time, use left key to change the setting items and pressup and down key to make adjustment. Press Ok key to make confirmation andpress menu key to cancel the setting and return to the main menu.

SSSSoundoundoundound recordingrecordingrecordingrecording modemodemodemodeEnter the sound recording mode through the mode switching key after startup.Press the recording key to begin sound recording and press it again to stop thesound recording.When the video camera is idle, press DISPLAY key to switch over among threescreen displays naming close the icon, close screen and normal display.◆ Information displayed on the screen in the sound recording mode.

Page 20: User manual for icam 16

19

Icon Icon name Description

1111

Sound

recording

mode

Indicating the selection of soundrecording mode

2222Recordable

time

Indicating how long is the recordabletime

3333 Card

indicates inserting the memory card

and means that the SD card used

under the write-protect state.

4444Recorded

timeIndicating that how long is recorded.

5555Quantity of

electricity

Indicating the current state of battery.

When it is red, it means that the battery

runs out and the video camera will

switch off automatically.

PPPPlaybacklaybacklaybacklayback modemodemodemodeRotate the mode button to enter playback mode.In the playback mode, press left key to select files forwards and press right key toselect files backwardsWhen the video is selected, press Ok key to play. At the same time, the play timeris display on the top left of the screen. During the play process, press up key to

Page 21: User manual for icam 16

20

pause and press recording key to continue playing, press Ok key to stop theplaying.When the photo is selected, press T key to zoom in the photo and useup/down/left/right key to move the photo.

◆ Information displayed on the screen during playback of the video

Icon Icon name Description

1111Icon of theplayback mode

Indicating that it is in the playbackmode.

2222 File numberIndicating the position and quantity ofcurrent files( the timer for video play)

3333Key pressingreminding

Remind the key pressing

4444 Video iconIndicating that the file selectedcurrently is video

5555 File protection Indicating that the current files are

Page 22: User manual for icam 16

21

under the write-protect state.◆ Information displayed on the screen during photo playback mode

Icon Icon name Description

1111Playback modeicon

Indicating that it is in the playbackmode

2222 File number

Indicating the file position of currentfile and the quantity of total files(display the timer when the files arebeing played).

3333Move prompt Indicating that the photo is zoomed in

and locked, it can be moved.

4444Magnificationtime

Indicating the magnification time ofcurrent photo

5555Key pressingreminding

Remind the key pressing

6666 Photo iconIndicating that the file selected

currently is photo.

7777 File protectionIndicating that the current files areunder the write-protect state.

◆ Information displayed on the screen during recorded sound playback mode

Page 23: User manual for icam 16

22

Icon Icon name Description

1111Playbackmode icon

Indicating that it is in the playbackmode

2222 File numberIndicating the file position of currentfile and the quantity of total files.

3333 Play timer( display the timer when the files arebeing played)

4444Key pressingreminding

Remind the key pressing

5555Soundrecording icon

Indicating that the current selection is

the sound files

◆ Menu setting

Press the menu key to open the playback main menu, press up key or down key toselect menu and press Ok key to enter the submenu. In the submenu, press themenu key or OK key to return to the main menu, press up key or down key to makeselection, and press OK key to make confirmation. After returning to the mainmenu, pressing the menu key can exit the menu.Options of playback menu

MMMMainainainain menumenumenumenu SSSSubmenuubmenuubmenuubmenu DDDDescriptionescriptionescriptionescription

File lock

Lock/unlock thisfile Lock/unlock current files

Lock all Lock all filesUnlock all Unlock all files

Page 24: User manual for icam 16

23

File deletionDelete this file Delete the current fileDelete all Delete all files

Slide playingBegin Begin to play the slideInterval 1 second ~10 secondsCycle Yes/No

Special effect

Normal Normal effectBlack and white Black and white effectRepristination Nostalgic effect

Negative Film effectRed Red effectGreen Green effectBlue Blue effect

BnaryzationSunset Sunset effect

Warm colorCold color

overexposure Overexposure effect

Deform

H-PinchH-PunchV-PinchV-PunchH-StretchH-ShrinkV-StretchV-ShrinkWavy

HourglassBubble

Bubble Fill

RotateRotate Rotate the imageSave Save the rotated imageReturn Return to the main menu

Soundmemorandum

Add Add the sound memorandum to thephoto

Page 25: User manual for icam 16

24

Delete Delete the sound memorandum of thephoto

Set as thestartup picture

Yes Set the image as the startup picture

No Do not wet the image as the startuppicture

Print

Note: 1. A piece of new photo will be saved separately after the special effect is setor the photo is saved after rotation.

2. The sound memorandum of 30 seconds to the most can be added to everyphoto. During the playback mode, the icon will be displayed on the photo to whichthe sound memorandum is added. Press Ok key to play the sound memorandum, duringthe process of playing, press up key to pause or press Ok key to stop.

Setting menuSame as the video recording modeDownload photo/video by connecting with the computer

After the video camera is connected with the computer, and enters movable disk

mode, there will be a new movable disk displayed in “my computer” window and the

photos or videos are saved in the directory of “DCIM\100MEDIA” in the movable disk.

After entering this directory, the files can be copied to your hard disk in the computer.

________________________________________________________________________

Note: during download process, the USB connection can not be disconnected.

When USB is connected, the memory card can not be pulled out to prevent

data lost.

________________________________________________________________________

ApplicationApplicationApplicationApplication ofofofof PCPCPCPC cameracameracameracamera functionfunctionfunctionfunction

Before the application of PC camera function, make sure to confirm that the camera driver

has been installed to the computer. After driver is installed, the “start all programs”

menu will be increased with one “SPCA 1528 PC Driver” menu which has the shortcut

icon . After the video camera has been connected with the computer and has

Page 26: User manual for icam 16

25

entered PC camera mode, click this shortcut icon (shown as the following picture) to open

AMCAP window. All the relevant images corresponding to the camera lens of video

camera will be displayed in AMCAP window. When AMCAP software is not opened,

application of PC camera function can send video images by network.

3. Install Software

Insert the accompanied CD into CD-ROM, and the installation guide program will run

automatically, the installation guide window appearing. There are four keys on the guide

window:

Install Driver

Install MediaImpression

Browse CD

Exit

Make sure to select the

Preview in Option menu.

Page 27: User manual for icam 16

26

InstallInstallInstallInstall DriverDriverDriverDriver

Click the InstallInstallInstallInstall DriverDriverDriverDriver button to finish installation step by step according tothe clew.

After finishing installation, please restart the computer.Note:Note:Note:Note: BeforeBeforeBeforeBefore installinginstallinginstallinginstalling thethethethe driver,driver,driver,driver, dodododo notnotnotnot connectconnectconnectconnect thethethethe cameracameracameracamera withwithwithwith thethethethecomputercomputercomputercomputer inininin orderorderorderorder totototo avoidavoidavoidavoid thethethethe installinstallinstallinstall error.error.error.error.MediaImpressionMediaImpressionMediaImpressionMediaImpression InstallationInstallationInstallationInstallation andandandand Use:Use:Use:Use:Install Mediainpression:Click “Install MediaImpression” button and complete the installation as perthe tips.

Page 28: User manual for icam 16

27

After installation, please restart the computer.Run MediaImpression :

Double click the icon on the desktop or follow “Start → Programs” toopen:

MediaImpression

After starting MediaImpression,,,, click the “Import” to import the media.

Page 29: User manual for icam 16

28

Choose the video camera storage and choose the output location.

Choose require file and click the import, selected file will be stored in theoutput location.

Page 30: User manual for icam 16

29

Click “Go to start page” to return the main screen, click the “Video” or “Allmedia” to use the “YouTube” function.

Choose file and click the “upload to YouTube.

Enter you username and password to login the YouTube, execute upload.

Page 31: User manual for icam 16

30

SpecificationSpecificationSpecificationSpecification

Image sensor 5 million pixel CMOS image sensor

Photo resolution 4624×3472, 3648×2736, 2592×1944,2048×1536

Memory External SD card (128MB to 8GB)

File forma JPEG, AVI, WAV

Video resolution D1 720×480,VGA 640×480 ,QVGA 320×240

Automatic time delay 2 seconds/10 seconds

Digital zoom 8 times

White balanceAuto/shiny day/cloudy day/ fluorescent lamp/

osram lamp

Exposure Compensation -2.0 ~ +2.0

USB ort USB2.0

TV output NTSC / PAL

Display screen 2.7” TFT LCD

Power supply Four AAA alkaline cell or 3.7V chargeable lithium

battery

Menu language English/ Simplified Chinese/ Chinese-traditional

Focal distance f=6.5mm

Aperture F 3.1

Auto power off 1 minute/3minutes/5minutes

Requirement of the Windows 2000 / XP / Vista /7

Page 32: User manual for icam 16

31

operating system

Size138.6 mm×66 mm×72 mm

Note: The design specification of the product is made according to the latestinformation when the instruction for use is prepared. They are subject to changewithout further notice. Please refer to the real video camera.

FFFFrequentlyrequentlyrequentlyrequently askedaskedaskedasked questionquestionquestionquestionssss

The video cameracannot start afterthe battery isinstalled.

The quality of electricity is not enough. Please replaceit with new battery(or charge the lithium battery)The package of the battery is not removed.The battery is reversed. Please confirm whether theinstallation of the battery is correct or not.

Pressing theshutter buttoncannot take photosor record video.

The memory card is not inserted. The photo taking orvideo recording cannot be performed unless thememory card is inserted.The SD card in the camera video is under thewrite-protect state. Take out the SD card to push thewrite-protect switch to lift the write-protect.

The photo is vague.

The hand shakes when the photo is being taken.Please hold the camera firmly with both hands or usetripod or other objects to stabilize the camera. Don’tmake the camera shake when taking photos.

The photo or videois dim.

The light of the environment is not enough. Pleasetake photos in the environment with enough light oruse light to add the brightness.

Auto switch off ofthe camera

The quantity of electricity of the battery is not enough.Please replace the battery (or charge the lithiumbattery)

Page 33: User manual for icam 16

32

The camera will automatically switch off in order tosave power energy if there is no any operation duringthe time exceeding 1 minute (3 minutes or 5 minutes,according to the different setting).

The files in thecamera cannot bedeleted.

The SD card in the camera video is under thewrite-protect state. Take out the SD card to push thewrite-protect switch to lift the write-protect.

Page 34: User manual for icam 16