USER MANUAL – BPMS TP...

(n)Code Solutions

User Manual – TP Client

User Manual TP Client

Confidential @ (n)Code Solutions Page | 1

Document Information

Document Name User Manual – TP Client

Released Version 1.1

Released Date 24-01-2018

Document Revision History

Version Author Date Changes

incorporated

Reviewed

By

Review

Date

0.1 Tejaswini

Thalange 30-04-2017 Draft Document

Pravin

Lokhande 22-05-2017

0.2 Rupali

Karnik 23-05-2017

Formatted document

to a new template

Pravin

Lokhande 23-05-2017

0.3 Tejaswini

Thalange 17-07-2017

Made changes to

the manual Rupali Karnik 20-07-2017

0.4 Uday patil 24-07-2017 Made changes to

the manual Rupali Karnik 25-07-2017

1.0 Rupali

Karnik 30-07-2017

Released

Document

Pravin

Lokhande 30-07-2017

1.1 Akshay

Solkar 23-01-2018

Made

Changes to

manual

Pravin

Lokhande 24-01-2018

Disclaimer: This document contains proprietary confidential information to be used solely for the project

Building Plan Management System across ULBs in State of Maharashtra, by accepting this document, agrees

that neither this document nor the information disclosed herein, nor any part thereof, shall be reproduced or

transferred to other documents, or used or disclosed to others for any purpose other than the project.



Table of Contents

1 Document Outline .........................................................................................5

1.1 About Drawing Protocol Document .............................................................. 5

1.2 How to read this Document ........................................................................ 5

2 Drawing Pre-formatting Utility (TP Client) ....................................................6

2.1 Overview ................................................................................................. 6

2.2 Aims & objectives...................................................................................... 7

2.3 Salient features ........................................................................................ 7

2.4 Benefits of TP Client .................................................................................. 8

2.5 Drawing formats ....................................................................................... 8

2.6 Protocol details ....................................................................................... 10

2.7 Installation and Registration ..................................................................... 11

2.8 Installation ............................................................................................. 11

3 Methodology ............................................................................................... 13

4 TP Client Layer Information ........................................................................ 19

4.1 Layer: Mark Sub Division Boundary. (TP Client-subdivision-Boundary) ........... 19

4.2 Layer: Mark Amalgamation Boundary. (TP Client-Amalgamation-Boundary) .... 20

4.3 Layer: Mark Plot Boundary. (TP Client-PlotBoundary)/Mark Sub Plot Boundary

(TP Client-Subplotboundary) .................................................................... 21

4.4 Layer: Create Plot Side. (TP Client-Front-Line)/Create Sub Plot Side (TP Client-

SubFront-Line) ....................................................................................... 23

4.5 Layer: Mark Reserve Area ........................................................................ 24

4.6 Layer: Mark Existing Structure Demolished ................................................ 25

4.7 Layer: Mark Drainage Line ....................................................................... 26

4.8 Layer: Mark Ramp ................................................................................... 27

4.9 Layer: Mark Open Space/ Recreational G Open Space .................................. 28

4.10 Layer: Mark Amenity Area ........................................................................ 30

4.11 Layer: Mark Building in Plot ...................................................................... 31

4.12 Layer: Mark Basement Parking Area or Mark Stilt/Podium Parking Area or Mark

Open Parking Area. ................................................................................. 31

4.13 Layer: Mark Column ................................................................................ 32

4.14 Layer: Mark Compound Wall ..................................................................... 33

4.15 Layer: Mark Exit/ Entrance Gate ............................................................... 34



4.16 Layer: Mark Substructure ......................................................................... 34

4.17 Layer: Mark Electrical Line ....................................................................... 35

4.18 Layer: Place Tree /Place Fire Alarm ........................................................... 36

4.19 Layer: Mark Helipad ................................................................................ 36

4.20 ROAD - Layer: Mark Main Road ................................................................. 36

4.21 Layer: Mark Internal Road/ Mark Internal DP Road ...................................... 37

4.22 Layer: Mark Road Widening ...................................................................... 38

4.23 How to draw ........................................................................................... 38

4.24 Layer: Mark Pathway ............................................................................... 39

4.25 BUILDING - Layer: Mark Building Boundary ................................................ 40

4.26 Layer: Mark Floor Boundary ..................................................................... 41

4.27 Layer: Mark Reference ............................................................................. 42

4.28 Layer: Mark Solar ................................................................................... 42

4.29 Layer: Mark Rain Water Harvesting Tank/ Mark OHT / Mark UGR / Mark Solar.43

4.30 Layer: Mark Parking ................................................................................ 43

4.31 Layer: Draw Section View ........................................................................ 44

4.32 FLOOR - Layer: Mark FSI Residential/ Commercial / Industrial ...................... 45

4.33 Layer: Mark Carpet Area .......................................................................... 46

4.34 Layer: Mark Room ................................................................................... 47

4.35 Layer: Mark Kitchen / Mark Toilet / Mark WC / Mark Bathroom ..................... 48

4.36 How to draw ........................................................................................... 48

4.37 Layer: Mark Balcony ................................................................................ 49

4.38 Layer: Mark Terrace ................................................................................ 50

4.39 Layer: Mark Head Room ........................................................................... 50

4.40 Layer: Mark Mezanine .............................................................................. 51

4.41 Layer: Create Door/ Ventilation /Window ................................................... 51

4.42 Layer: Mark Passage/Corridors/Lobby ........................................................ 52

4.43 Layer: Mark Escalators ............................................................................ 53

4.44 Layer: Mark Lift ...................................................................................... 54

4.45 Layer: Mark Duct/ Mark Void / Mark Ventilation Shaft .................................. 55

4.46 Layer: Mark Arch. Projection ..................................................................... 56

4.47 Layer: Mark Stair Case ............................................................................ 56

4.48 Layer: Mark Tread/ Mark Mid Landing / Mark Floor Landing .......................... 57



4.49 Layer: Mark Refuge Area .......................................................................... 58



1 Document Outline

1.1 About Drawing Protocol Document

Urban Development Department has planned to automate the building plan

approval process by introducing TP Client system. TP Client software reads the CAD

drawings submitted by architects and automatically produce the deviation report

based on the control regulations prescribed by UDD.

The purpose of this document is to establish a set of guidelines to Architects for

preparation of drawings to be submitted for taking Building Permission from UDD,

Uniformity in the process of drafting of the drawings to be submitted for approval

is required for automation of building approval system by introducing TP Client

system.

The consultants/Architects should prepare the drawings keeping specific objects in

specific layers with specific colors and text. The layers required to be generated

with explanation of what is required to be drawn on which layer is described in this

document. This document serves as a source of information on obtaining level of

consistency in drafting and approval process focuses on both the theoretical and

practical description of process flow and protocol to be used while preparing

drawings for submission at UDD for Building Permission. The document explains

use of TP Client utility

1.2 How to read this Document

This document should be read in conjunction with the Development Control

Regulations which will be applicable for approval of a proposal. The reader of this

document should have understood the applicable DCR for scrutiny of a proposal.

The reader should also be familiar with AutoCAD / ProgeCAD terminology and

environment for better understanding of the system. It is more exploratory in

nature than the specifications and contains sections to explain particular aspect of

planning and designing.



2 Drawing Pre-formatting Utility (TP Client)

2.1 Overview

DCR is a unique and innovative approach to automate scrutiny of building proposals

by reading CAD drawings. TP Client software needs preformatted drawings with

some specifications. TP Client is a software application used to create the

architectural plan as per DCR software requirements. It helps in standardization of

drawings and helps in reducing time required for preparing submission drawings.

It works under AutoCAD / ProgeCAD environment with additional menu

Using TP Client commands, user can create all the required layers. Once all the

layers are created in the drawing user can use AutoCAD / ProgeCAD commands

to draw entities on the corresponding layers with the help of TP Client software.

Short commands are provided to activate /layer in TP Client. TP Client also helps

in correcting drafting errors in the drawing by displaying error in command line.

TP Client will highlight all the failed entities if any in command line.



2.2 Aims & objectives

To bring uniformity and standardization in submission drawing format.

To create error free drawing by auto-correction of drafting errors.

To Increase drafting speed and efficiency

To reduce drawing data redundancy.

To remove dimensioning and area calculation requirements from

submission drawing format and auto-calculating areas in DCR

automatically.

2.3 Salient features

Automatic insertion of required text in the drawing.

Automatically inserting entities of required size in the drawing: User can mark then

enter name of field then automatic size will get created.



TP Client verifies and will highlight failed entities by giving Popup when clicked

on “Validation Tool”

2.4 Benefits of TP Client

Standardization of submission drawings-Brings uniformity &

standardization in submission drawing format. This software will correct

some minor drafting errors and also provide list of failed entities with

Hardship facility so that user can easily locate the failed entities in the

drawing.

Increased speed and efficiency-TP Client facilitates Auto insertion of

many drawing entities like parking. Auto-dimensioning and auto-

calculation facility saves calculation efforts. Using this software user can

create all the required layers.

Accuracy - Accuracy in area calculations is achieved. Preparing

Calculation tables, showing dimensions in the drawing is not required.

2.5 Drawing formats

1) Conventional submission drawing format



2) As per TP Client format specified by TP Client

3) After Generation of drawing using DCR-



2.6 Protocol details

TP Client is a software application used to create the architectural plan as per

DCR requirements. It works under AutoCAD / ProgeCAD environment with

additional menu & toolbar. Using TP Client commands user can create all the

required layers. Once all the layers are created in the drawing user can use CAD

commands to draw layout plan. As per DCR requirement all building items like

proposed plot, proposed work should be drawn on the corresponding layers. Short

commands are provided to activate any layer in TP Client At any time. TP Client

will highlight all the failed entities if any in command line. TP Client can be used to

modify/make and verify the existing or new architectural plan as per DCR software

requirements. Users are free to use CAD commands and or TP Client commands to

achieve the main purpose which is:

Drawing the architectural plan in DWG format as per DCR

requirements. For automating the process of Development Control

Regulations user/draughtsman/architect have to follow some

specifications. The following are the list of specifications that the user

should follow. Site Plan, Layout Plan, Building Plan, Service Plan should

be there in one CAD drawing file.

All building items like proposed plot, proposed work, proposed parking

etc must be drawn using closed polyline. (i.e. Every entity must be closed

LWPOLYLINE except Drain line, Water Line, Electric Line, Dead Wall ).

Building Sub-Items must be exactly inside of outer closed polygon

as per their place in architectural plan. This means none of the edge

or vertex of inside entity should be drawn outside its container entity.

For example Parking or Open Space poly must be exactly inside the main

plot poly.



Every Building Sub-Items should be given a specific/unique name (Text or

MText entity) on the same layer & inside the entity poly. Automatically

Naming Conventions should be followed by entering text for command

enter Name.

Floor Name: GROUND FLOOR; TYPICAL FLOOR 1, 2 & 5; TERRACE

FLOOR

Floor Items: Room Names should be given properly without using

abbreviations so the software can identify perfect entity. This can be

done by Assign name facility provided by the software.

User shall use only following kind of entities for Building Items: -

LWPOLYLINE / TEXT / MTEXT

If in a plan two proposed work are mirrored in that case user should

provide two separate building plans for each proposed work.

2.7 Installation and Registration

System Requirements

Sl.

No.

Details Minimum Configuration

Requirement

1 Processor 2.2 GHz

2 RAM 3 GB or more

3 HDD 20 GB free HD space

4 OS Windoxs XP, 7, 8

5 Internet Connectivity 1 mbps or more

6 Software Required Winrar

7 No. of Systems 1 for each user of Application

8 AutoCAD /Proge CAD Version above 2013

2.8 Installation

To install TP Client software on your computer please follows the given steps.

Step 1: After online registration, on users login the setup of TP Client will

be available, Download it.



Step 2: Run the TP Client installer by double clicking on file "TP

Client_Installer.exe".

Step 3: Follow the next steps in installer wizard to complete installation.

Step 4: After installation the user should in put the valid Security code to

run the application.

After successful installation, a TP Client shortcut will be placed on your computer

desktop as shown below.



3 Methodology

Open the TP Client software by clicking on TP Client menu on your

desktop & login by Enter Valid Email Id & Password Which used for

Online, while registration.

Enter Unique Code which you have received trough SMS & Email.

Fill All Forms According to Drawing & Documents.

Project Information:



Project Details:

Project Details:

Click on Plot Area Details tab which is present on Project Details new window will

get open were you can fill all your plot area details, Multiple Details of plot can also

be filled by using Add New button.

Select the Drop downs as per your Drawing, Selection of Area Name & CTS no is

compulsory because rate is calculated on bases of CTS No.



Project Details:

Click on Client & Site Details tab which is present on Project Details new window

will get open were you can fill all your Client & Site Details, Multiple Details of Client

& Site Details can also be filled by using Add New button.

Building Details:



Right click on Building Type which is present on left side of application

(Tree) & click on Add to add building or click on remove to remove building.

Once clicked on add this window will get open, fill the details as per your

drawing.

Floors Details:

Right click on Typical Floor which is present on left side of application (Tree) & click on

Add to add Floor or click on remove to remove Floor.

Once clicked on add this window will get open, fill the details as per your drawing.

In Tab - Specify Floors with Identical plan & BUA Poly line user need to add floor number

as for basement = -1, Ground= 0, First=1 etc. if there are similar floors then eg. For such

cases is given below.

Eg: of Basement Floor.



Eg: Ground Floor

Eg: Typical Floor



Floor Arrangements

Click on Map to list tab then atomically the floors will get added.



4 TP Client Layer Information

4.1 Layer: Mark Sub Division Boundary. (TP Client-subdivision-

Boundary)

Description

In Subdivision one plot is divided into more than one Subdivision. All entities having

subdivision as their container entity should be uniquely present in all Subdivisions

of a Plot i.e. suppose there is a road widening in the Plot then the poly of road

widening should be different for each Subdivision (subdivided plot). Ex. Here Plot

1 is divided into three Subdivisions. And also the Road Widening is divided into

RoadW 1 and RoadW 2 for each Subdivision. (for subdivision, draw plot 1 on plot

layer and subdivided plots like SubDiv 1,SubDiv 2 & SubDiv 3 on sub-division layer

overlapping plot 1.)

Shortcut Command: SDB

How to draw

Subdivision:

Following rules will be applied on the objects of Subdivision layer

Name

Plot area

Recreation ground

Amenity

Road Widening

Pathway

Internal road

Main road

Reserve area

Precautions to be taken –

Draw polyline correctly

Give name to this object in same layer as that of object.

If this polyline has not been drawn and named correctly then all above

rules will not get checked.

Process -

Click on the layer Mark Sub Division Boundary.



In Command line – Select Option for Creating Area (Rectangle/ Draw/

select/ Boundary)By selecting these options the user can trace the

drawing, Rectangle[r] is used when the plot is of rectangle shape, Draw

is used when plot is irregular, Select [s] is used when ploy-line is

present, Boundary [b] is used when ploy-line is present.

Draw & Enter name to it.

Amalgamation

4.2 Layer: Mark Amalgamation Boundary. (TP Client- Amalgamation-Boundary)

Description:

Draw a continuous poly around the plots you want to amalgamate.

Amalgamation contains more than one plot amalgamated together. All entities

having amalgamation as their container entity should be uniquely present in each

amalgamation.I.e. suppose there is a road widening in the Plot then the poly of

road widening should be different for each amalgamation. (For amalgamation, draw

plot 1, plot 2, plot 3 on plot layer and amalgamated plot Amal Plot 1, on

amalgamation layer overlapping plot

Shortcut Command: AB

How to draw:

Following rules will be applied to Amalgamation layer

Name



Recreation ground

Amenity

Road Widening

Pathway

Internal road

Main road

Reserve area



Give name to this object in same layer as that of object.



Process -

Click on the layer Mark Amalgamation Boundary.







4.3 Layer: Mark Plot Boundary. (TP Client-PlotBoundary)/Mark

Sub Plot Boundary (TP Client-Subplotboundary)



Description:

Draw a Plot poly as a closed polyline which is a parcel or piece of land enclosed by

definite boundaries. A Plot will contain all Proposed Works (buildings, wings), open

space, Internal Roads, Parking etc. The overall Plot Entity represent a Plan,

AutoDCR refers it as 'Layout Plan'. The overall Plot Entity represent a Plan, AutoDCR

refer it as "Layout Plan".

Shortcut Command:Mark plot Boundary - PB / Mark Sub Plot Boundary - SP

How to draw:

Following rules will be applied to main plot layer

Size plot area

Permissible FSI

Requirement of Amenity

Requirement of Recreational ground

Requirement of Internal road, etc.


Draw a closed poly line correctly with text on same layer.

Provide Main access road overlapping with main plot.

Provide R.G, Amenity, reserve area, Road Widening, etc. inside Plot

boundary

Process –

Click on the layer Mark Plot Boundary.









4.4 Layer: Create Plot Side. (TP Client-Front-Line)/Create Sub Plot Side (TP Client-SubFront-Line)

Description:

Draw a Plot poly as a closed polyline which is a parcel or piece of land enclosed by

definite boundaries. A Plot will contain all Proposed Works (buildings, wings), open

space, Internal Roads, Parking etc. The overall Plot Entity represent a Plan,

AutoDCR refers it as 'Layout Plan'. The overall Plot Entity represent a Plan, AutoDCR

refer it as "Layout Plan".

Shortcut Command:

Create plot front side boundary PFS

Create plot rear side boundary PRS

Create plot left side boundary PLS

Create plot right side boundary SPB

SP

Create sub plot front side boundary SFS

Create sub plot rear side boundary SRS

Create sub plot left side boundary SLS

Create sub plot right side boundary SRS



How to draw:

Following rules will be applied to main plot layer

Size plot area

Permissible FSI

Requirement of Amenity

Requirement of Recreational ground

Requirement of Internal road, etc.


Draw a closed poly line correctly with text on same layer.

Provide Main access road overlapping with main plot.

Provide R.G, Amenity, reserve area, Road Widening, etc. inside Plot

boundary

Process –

Click on the layer Mark Plot Boundary.







4.5 Layer: Mark Reserve Area

Description:

Reserved area (Reservation area in Development plan) shall be drawn on this layer

if present in proposal. This can be any area reserved for/by Authority for future.

Shortcut Command: RA

How to draw:

Following rules will be applied to Reserve Area layer

Reserve area

Deduction





Give name to this object in same layer as that of object


rules will not get checked

Process –

Click on the layer Mark Reserve Area.






Draw the area.

4.6 Layer: Mark Existing Structure Demolished

Description:

Draw a structure which already approved by authority as a closed poly. And mark

this as 'To be demolished' by using Mark option from TP Client Menu.

Shortcut Command: SD

How to draw:

Following rules will be applied on the objects of Existing Structure Demolished layer

Existing coverage area

Existing built up area




Draw poly line properly and give a text and Mark “To be Demolished”

Process –

Click on the layer Existing Structure Demolished.

In Command line – Select Option for Creating Area (Rectangle/ Draw/ select/

Boundary)By selecting these options the user can trace the drawing,

Rectangle[r] is used when the plot is of rectangle shape, Draw is used when

plot is irregular, Select [s] is used when ploy-line is present, Boundary [b] is

used when ploy-line is present.

Draw the area.

4.7 Layer: Mark Drainage Line

Description:

Draw unclosed poly line for drainage line

Shortcut Command: DL



How to draw:

Process –

Click on the layer Mark Drainage Line.






Draw unclosed line.

Layer: Mark Water Line

Description: Draw unclosed line for water line

Shortcut Command: WL

How to draw: Process –

Click on the layer Mark Water Line.

In Command line – Select Option for Creating Area (Rectangle/ Draw/ select/ Boundary)By selecting these options the user can trace the drawing, Rectangle[r] is used when the plot is of rectangle shape, Draw is used when plot is irregular, Select [s] is used when ploy-line is present, Boundary [b] is used when ploy-line is present.

Draw unclosed line.

4.8 Layer: Mark Ramp



Description:

Draw a Ramp poly as a closed polyline in floor plans and/or plot. Naming convention

for ramp is "---m. long and ---m.

Shortcut Command: MR

How to draw:

Following rules will be applied on the objects of Ramp layer

Width

Slope

Process –

Click on the layer Mark Ramp.

Give width of ramp in „m‟

Specify 1st point specify last point – Note should be marked from center

to center of ramp & enter.

Enter start level height in „m‟ & End level height in „m‟.

4.9 Layer: Mark Open Space/ Recreational G Open Space

Description:

Draw Recreational Ground as closed polyline reserved as open space/ recreational

space on this layer.



Shortcut Command: ROS

How to draw:

Following rules will be applied on the objects of recreational ground layer

Balance plot

Deduction in area calculation

Minimum recreation ground area/ open space

Plot area in side recreation ground



If this polyline has not been drawn correctly then all above rules will not

get checked

Process –

Click on the layer Mark Open Space/ Recreational Ground






Draw closed line.



4.10 Layer: Mark Amenity Area

Description:

Draw Amenity Area as a closed polyline which is reserve for utilities, services and

conveniences.

Shortcut Command: AA

How to draw:

Following rules will be applied on the objects of Amenity layer

Deduction

Addition


Draw polyline correctly.

If this polyline has not been drawn then rules will not get checked

properly.

Process –

Click on the layer Mark Amenity Area.






Draw closed line.



4.11 Layer: Mark Building in Plot

Description:

If you are getting permission for layout and containing building in it, then you need

draw building periphery of that building. In this case, tentative block of building will

refer just the presence of building in Plot.

Shortcut Command: MBP

How to draw:

Process –

Click on the layer Mark Building in Plot






Draw closed line & name it.

4.12 Layer: Mark Basement Parking Area or Mark Stilt/Podium

Parking Area or Mark Open Parking Area.

Shortcut Command: Mark Basement Parking Area – BPA/ Mark stilt/

podium parking area- SPP Mark open parking area -OPA



How to draw:

Process –

Click on the layer Mark Basement Parking Area & Mark Stilt/Podium

Parking Area & Mark Open Parking Area.






Draw closed line.

4.13 Layer: Mark Column

Description:

Draw each column as closed poly line on “Column” layer inside parking floor as well

as inside and overlapped with Building line layer in other floors.

Shortcut Command: MC

How to draw:

Process –

Click on the layer Mark Column






Draw closed line.



4.14 Layer: Mark Compound Wall.

Description:

Draw poly line of compound wall to be drawn on proposed compound wall with text

started with compound wall height. E.g. 1.5m. High Compound Wall

Shortcut Command: CW

How to draw:

Following rules will be applied to Compound Wall

Height


Draw a closed poly line correctly.

Process –

Click on the layer Mark Compound Wall.

In Command line – Select Option 1.Front/2.Rear/3.Side

Enter wall width in ‘m’



Specify 1st & last point.

Enter Height in ‘m’.

4.15 Layer: Mark Exit/ Entrance Gate

Description:

Draw Closed ploy line for Mark Exit/Entrance Gate.

Shortcut Command: EG

How to draw:

Process –

Click on the layer Mark Exit/Entrance Gate.






Enter height in meter eg:2.1m.

4.16 Layer: Mark Substructure.

Description:

Draw closed ploy line for Mark Substructure.

Shortcut Command: SS



How to draw:

Process –

Click on the layer Mark Substructure.

In command line all options will get display such as 1.Electrical Room/2.

Transformer Room etc. by selecting 1,2,3,4 etc you can select the point

which you want to mark.






4.17 Layer: Mark Electrical Line

Description:

Draw unclosed line for electrical line

Shortcut Command: EL

How to draw:

Process –

Click on the layer Mark Electrical Line.


Boundary)By selecting these options the user can trace the drawing, Rectangle[r] is used

when the plot is of rectangle shape, Draw is used when plot is irregular, Select [s] is used

when ploy-line is present, Boundary [b] is used when ploy-line is present.

Draw unclosed line.



4.18 Layer: Place Tree /Place Fire Alarm

Description:

Pick the point where you want to place it.

Shortcut Command: Place Tree - PT/ Place Fire Alarm- PFA

4.19 Layer: Mark Helipad

Description:

Draw closed ploy line where you want to mark the Helipad it is allowed only in High

rise structure.

Shortcut Command: MHP

How to draw:

Process –

Click on the layer Mark Helipad.






Draw closed ploy line.

4.20 ROAD - Layer: Mark Main Road

Description:

Draw road with text specifying its width and draw a center line of road.

Shortcut Command: MMR

How to draw:

Process –

Following rules will be applied

Width

Length




Draw a unclosed poly line correctly and give text of width of road on

command line eg: - 9 m.

Draw main Road in front of Front Margin, marking main road is import to

get proper permissible building height.

4.21 Layer: Mark Internal Road/ Mark Internal DP Road.

Description:

Draw existing or proposed D. P. (Development Plan) road or T. P. (Town

Planning) Road when inside/intersected with plot. Give road width of

road. E.g. 9m wide D. P. Road.

Shortcut Command: IR/IDR

How to draw:

Process –

Internal DP Road:

Following rules will be applied

Width


Draw unclosed poly line correctly and give width of road on same layer.



4.22 Layer: Mark Road Widening

Description:

Draw a road widening polyline as a closed polyline which the plot area is

going to the road, that area should be drawn on this layer. It should be

inside the plot polyline.

Shortcut Command: RW

4.23 How to draw:

Road Widening:

Following rules will be applied to Road Widening layer

Calculation of net Plot

Widening of Road


Draw a closed poly line correctly inside Main plot and give text on same

layer.



4.24 Layer: Mark Pathway

Description:

Draw Pathway as a unclosed polyline with text specifying its width.eg.1.5

m. wide pathway.

Shortcut Command: PW

How to draw:

Pathway:

Following rules will be applied on the objects of Pathway layer

Length

Width



Give width to this object in same layer as that of object





4.25 BUILDING - Layer: Mark Building Boundary.

Description:

Draw rectangle around by considering all the Floor plans, Section &

elevation, site plan etc. so that while generating the floors get identified,

eg Ground floors details get identified.

Shortcut Command: BB

How to draw:

Draw rectangle around the considering whole drawing so that it get

identified while generating.



4.26 Layer: Mark Floor Boundary.

Description:

Draw rectangle around single floor as shown in below eg. Draw rectangle

considering all components of ground floor then mark it.

Shortcut Command: FB

How to draw:

Draw rectangle around each floor considering all the items of that floor,

for each floor differently.

After making it will ask to select building then select the outer building

boundary.

Then select from drop down which floor it is eg: Ground Floor, First Floor

etc.



4.27 Layer: Mark Reference

Description:

Put reference point on staircase corner on every floor it should be on

same point as of fist floor you have marked. It help in Auto creating 3D

drawing.

Shortcut Command: REF

How to draw:

Pick the point on each floor which you want to refer.

Careful while selecting same corner should get selected on each floor

then only auto 3D gets created & follow the steps in command line.

4.28 Layer: Mark Solar

Description:

A closed polyline to represents Solar. Solar can be drawn in TERRACE

FLOOR. It should be drawn as per internal size or dimensions.

Shortcut Command: MS

How to draw:

Draw on the floor where it is located by giving its proper capacity in

liters.



4.29 Layer: Mark Rain Water Harvesting Tank/ Mark OHT / Mark

UGR / Mark Solar.

Description:

A closed polyline on _Tank layer represents a water tank. Under Ground

tank can be drawn in Floor or Layout plan. If it is drawn in Floor plan

then it should be at bottom of GROUND FLOOR. Overhead tank can be

drawn in TERRACE FLOOR. Tank should be drawn as per internal size or

dimensions. Both the tank also draws in section also.

Shortcut Command: Rain Water Harvesting Tank -RWH /Mark

OHT - OHT / Mark UGR- UGR / Mark Solar- MS

How to draw:

Following rules will be applied on the objects of Tank layer

Tank area

Width

Depth

Capacity


Draw closed poly line properly and give capacity of tank.

If this polyline has not been drawn correctly then all above rules will not get check.

4.30 Layer: Mark Parking.

Description:

Pick the point where you want to place the vehicles select the vehicle

type from command line, once you select the type eg: Car, then auto

rectangle of standard size of car gets created.

Shortcut Command: PAR

How to draw:

Parking:

Following rules will be applied to Parking layer

Select the type of Vehicles & pick the point where you want to mark.




If it is not inserted correctly then no of proposed parking‟s will not come

proper.

4.31 Layer: Draw Section View

Description:

Select the building line (Yellow Rectangle) which you have already

created then pick the opposite point so that section (line Section) to

define height is created atomically.

Shortcut Command: SV

How to draw:

Section:

Following rules will be applied on the objects of Section layer

All Floors in section

Ground level

Building height


Follow the same process as given above for drawing line section view so

that it gives proper result.



4.32 FLOOR - Layer: Mark FSI Residential/ Commercial / Industrial.

Description:

Draw a “FSI” as a closed poly line which area to be calculated for

consumption of actual Built-up of that floor excluding cantilever

projections, Natural terrace but consider balcony & Terrace so that we

can get excess terrace & balcony automatically.

Shortcut Command: Mark FSI residential-FSIR /Mark FSI commercial-

FSIC / Mark FSI Industrial - FSII

How to draw:

Pathway:

Following rules will be applied on the objects of Pathway layer

Length

Width



Give width to this object in same layer as that of object



Consider balcony & terrace will parking & then mark balcony area &

Terrace area separately so that excess values are calculated.



4.33 Layer: Mark Carpet Area

Description:

Draw carpet area as a closed poly line which is a net usable floor area

within a building excluding that covered by the walls or any other areas

specifically exempted from floor space index computation in this

regulation.

Shortcut Command: CA

How to draw:

Carpet Area:

Following rules will be applied to carpet area layer

Per Carpet Tenement number check required

Tenement density

Water tank calculation




Draw poly line correctly Give text of carpet area as Floor name or flat

number etc. while creating layer to identify your carpet

If this poly line has not been drawn and named correctly then all above


4.34 Layer: Mark Room

Description:

Draw closed polyline of Room layer represents a rooms ie. Bedroom,

Master Bedroom, other room etc. In command the rooms will display

user can select the option which room he want to select by clicking 1,

2,3etc. Then give proper text to the room by tying in command field.

Shortcut Command: ROO

How to draw:

Following rules will be applied on the objects of room layer

Click on TP Client menu Floor Mark Room



Once you select mark room in command line types of room get display

eg: 1. Bed room, 2. Master Bedroom etc. select 1 or 2 which ever room

you need to mark.

Then type the text you require & auto dimension (Room size, Width) will

get display with that text.


Draw closed poly line properly and give name to this object.

Room must be inside carpet area poly line.

4.35 Layer: Mark Kitchen / Mark Toilet / Mark WC / Mark Bathroom

Description:

Draw closed polyline of Kitchen. Then give proper text to the room by

tying in command field.

Shortcut Command: Mark Kitchen- MK /Mark Toilet- MT / Mark WC-WC /

Mark Bathroom- MB

4.36 How to draw:

Following rules will be applied on the objects of room layer

Click on TP Client menu Floor Mark Kitchen

Select mark Kitchen Draw closed poly line or select poly line to mark it.



Then type the text you require & auto dimension (Room size, Width) will

get display with that text.



Kitchen room must be inside carpet area poly line.

For Mark Toilet/ Mark WC / Mark Bathroom for all these same option as

we used for kitchen should be used.

4.37 Layer: Mark Balcony

Description:

Draw closed poly line of Balcony. Select which type of balcony it is

normal or enclosed. Then give proper text to the balcony by tying in

command field.

Shortcut Command: BAL

How to draw:

Following rules will be applied on the objects

Click on TP Client menu Floor Mark Balcony

Select mark Balcony Draw closed poly line or select poly line to mark it.



Then type the text you require & auto dimension of Balcony will get

display with that text.



Consider balcony in FSI line so that we can identify & calculate %

permissible & excess proposed to that floor.

4.38 Layer: Mark Terrace

Description:

Draw closed poly line of Terrace.

Shortcut Command: TERR

How to draw:


Click on TP Client menu Floor Mark Terrace

Select mark Terrace Draw closed poly line or select poly line to mark it.



Consider Terrace in FSI line so that we can identify & calculate %

permissible & excess proposed to that floor.

4.39 Layer: Mark Head Room



Description:

Draw closed poly of Headroom on Terrace as headroom are placed on

terrace above staircase.

Shortcut Command: HR

How to draw:


Click on TP Client menu Floor Mark Head Room.

Select mark Head Room Draw closed poly line or select poly line to mark

it.


Draw closed poly line properly and give height of headroom.

4.40 Layer: Mark Mezanine

Description:

Draw closed poly of Mezanine floor were in room it is placed.

Shortcut Command: MM

How to draw:


Click on TP Client menu Floor Mark Mezanine.

Select mark Mezanine draw closed poly line or select poly line to mark it

in which room you want to place.


Draw closed poly line properly and give height of Mezanine.

4.41 Layer: Create Door/ Ventilation /Window

Description:

Door/ Ventilation /Window is a closed Polyline which is drawn on location

of window. Enter proper height when asked in command & give naming

convention as “V,W1,D1” etc

Shortcut Command: Create Door- CD/ create ventilation/window - CV



How to draw:


Click on TP Client menu Floor create Door/ Ventilation /Window

Select create Door/ Ventilation /Window draw closed poly line or select poly line to

mark it in which room you want to place.


Draw closed poly line properly and give height of Door/ Ventilation

/Window.

4.42 Layer: Mark Passage/Corridors/Lobby

Description:

Draw a closed polyline of passage/corridors/Lobby. It is a common

passage or circulation space including a common entrance hall. Select

which type of passage it is by selecting from command. Lift lobbies to be

drawn on same layer and to be marked it as Paid by using from

command.

Shortcut Command: MP

How to draw:


Click on TP Client menu Floor Mark passage/corridors/Lobby



Select Mark passage/corridors/Lobby, select option from command 1.open passage or

corridors/2.covered free from Fsi/3.covered Taken in Fsi/4.Lobby you can select any of the

option by clicking 1,2,3,4 then option Rectangle/Draw/Select/Boundary will display in

command line you can select “S” & select the poly line the it will mark automatically for

Draw-D, for rectangle-r, Boundary-b can select & mark it.


Draw closed poly line properly.

4.43 Layer: Mark Escalators

Description:

Draw closed poly line of mark escalators this is usefully in case of malls,

huge complexes etc.

Shortcut Command: ESC

How to draw:


Click on TP Client menu Floor Mark Escalators

Option Rectangle/Draw/Select/Boundary will display in command line you

can select “S” & select the poly line then it will mark automatically for




You can mark rectangle around the escalator in plan.



4.44 Layer: Mark Lift

Description:

Draw closed poly line of Mark Lift.

Shortcut Command: LIF

How to draw:


Click on TP Client menu Floor Mark Lift

Select Mark Lift, select option from command 1.Lift/2.Machine Lift/3.Fire

Lift you can select any of the option by clicking 1, 2,3.

Then option 1.Remove From Fsi /2.Taken in Fsi will display you can

select any of the option by clicking 1,2.

Then Option Rectangle/Draw/Select/Boundary will display in command

line you can select “S” & select the poly line then it will mark

automatically for Draw-D, for rectangle-r, Boundary-b can select & mark

it.

Then after typing text auto dimension will display.





4.45 Layer: Mark Duct/ Mark Void / Mark Ventilation Shaft

Description:

Draw closed poly line of Mark Duct/Mark Void/Mark ventilation Shaft.

Shortcut Command: Mark Duct- MD / Mark Void- MV / Mark ventilation

Shaft-VS

How to draw:


Click on TP Client menu Floor Mark Duct/ Mark Void / Mark Ventilation

Shaft.

Then Option Rectangle/Draw/Select/Boundary will display in command line you can select

“S” & select the poly line then it will mark automatically for Draw-D, for rectangle-r,

Boundary-b can select & mark it.

Then after typing text auto dimension will display.





4.46 Layer: Mark Arch. Projection

Description:

Draw closed poly line of Mark Arch.projection.

Shortcut Command: AP

How to draw:


Click on TP Client menu Floor Mark Mark Arch. Projection.

Select Mark Lift, select option from command

1.F.Bed/2.Chajja/3.C.B/4.loft/5.Canopy/6.Porch you can select any of

the option by clicking 1, 2,3,4,5,6.




it.


Then auto name will get display once you select the option.



4.47 Layer: Mark Stair Case.



Description:

Draw closed poly line of Mark Staircase, Mark Rectangle around the plan

of staircase.

Shortcut Command: ST

How to draw:


Click on TP Client menu Floor Mark staircase.

Select Mark Staircase, select option from command 1.Normal Staircase

/2.Spiral /3.Fire Escape Stair you can select any of the option by clicking

1, 2,3.




it.




4.48 Layer: Mark Tread/ Mark Mid Landing / Mark Floor Landing.

Description:

Draw closed poly line of Mark Tread/ Mark Mid Landing/ Mark Floor

Landing, Mark Rectangle for each Tread/ Mid Landing / Floor Landing.



Shortcut Command: Mark Tread - TRE / Mark Mid Landing – ML / Mark

Floor Landing - FL

How to draw:


Click on TP Client menu Floor Mark Tread/ Mark Mid Landing/ Mark Floor

Landing.

Option Rectangle/Draw/Select/Boundary will display in command line you can select “S” &

select the poly line then it will mark automatically for Draw-D, for rectangle-r, Boundary-b

can select & mark it.




4.49 Layer: Mark Refuge Area

Description:

Draw closed poly line of Mark Refuge Area.

Shortcut Command: RFSI

How to draw:


Click on TP Client menu Floor Mark Refuge Area.

Option Rectangle/Draw/Select/Boundary will display in command line you

can select “S” & select the poly line then it will mark automatically for




USER MANUAL – BPMS TP...

Documents

Transcript of USER MANUAL – BPMS TP...