User Manual bizhub 350
Transcript of User Manual bizhub 350
-
8/19/2019 User Manual bizhub 350
1/28
bizhub 350 / 250English Shortcut Manual
For details information, please refer to the operating manual (Usual Manual)
-
8/19/2019 User Manual bizhub 350
2/28
Basic T ouch P a n el
-
8/19/2019 User Manual bizhub 350
3/28
-
8/19/2019 User Manual bizhub 350
4/28
Basic
Paper 1. Automatically selecting the paper size by
press ”Auto aper !elect” setting
". #ouch $aper% to select desired paper size
&. 'opying label or thic paper should through
the multiple bypass
C h a n g e C u s t o m Size
1. #ouch [Change Setting]
". !elect aper #ype e.g. $ormal* +-%
&. !elect aper !ize e.g. $A * /etter%
. 0nput 'ustomer paper size by touch
[Custom Size]
. 0nput the length of paper into [ ]
2. 0nput the depth of paper into [ ! ]
3. !a4e the setting by $!ize 5egistration%
And select the $1% or $"%
6. ress $7nter% bac to front page
-
8/19/2019 User Manual bizhub 350
5/28
en press the Start Copy Key
Specifying a Zoom setting
1. #ouch ["oom] to select the ratio
". #ouch [8 * 9 % for fine tone
&. +r touch [! "oom]
Using the eypad, type in the desired
zoom ratio, touch [Set "oom] to
store the zoom ratio e.g. 1 :1.;;; or
" :1.;;;
+r touch [#n$i%i$ual "oom]
0nput the indi4idual zoom ratio into [ ]及[ ! ]
. #ouch [Enter] finally
Sort
1. Touch Finishing
2. Touch Sort for sorting
3. Th
-
8/19/2019 User Manual bizhub 350
6/28
- Simplex / Duplex Copy
Touch Simplex / Duplex for [single size / double size]
a. Single-sidedouble-sided
b. ouble-sided Single-Sided
c. ouble-sided
ouble-sided
Combine Originals
-
8/19/2019 User Manual bizhub 350
7/28
!ultiple docu"ent p#ges $"#inly 2% & or ' p#ges( c#n be co"bined #nd
print on # single p#per% reducing p#per use.
Touch Combine Originals to select 2in1or 4in1
Quality Density
1. #ouch [&ualit' (ensit']
". #ouch [)ighter] or [(ar*er] to ad
-
8/19/2019 User Manual bizhub 350
8/28
Application
Cover Moe
1. #ouch ,--lication
". #ouch Co%er Mo$e
&. !elect either =>ith image? or =blan? to specify
>hether or not a page of the document is copied
onto the insertion sheet
. !elect the paper tray loaded >ith the paper
. #ouch .* to confirm
2. ress the Start ey
Page !nsertion
1. #ouch Page #nsertion
". #ouch #nsert Pa-er
&. !elect ith #mage / Blan*
. !elect the paper tray loaded >ith the interleaf paper
). ress the Start ey
-
8/19/2019 User Manual bizhub 350
9/28
!mage "epeat
1. #ouch ,--lication
". #ouch Boo* Co-' /e-eat
&. #ouch .%ersize$ Pa-er to input the size
. #ouch #mage e-eat
. #ouch Custom Size to input the lenth of @ and depth of
2. #ouch .1 to confirm
3. ress the Start ey
#oo$ Copy
1. #ouch ,--lication
". #ouch Boo* Co-'/ e-eat
&. #ouch Boo* Co-'
. #ouch Se-aration,#ouch Enter to in-ut
. lace the boo on the original glass
2. #ouch Start to start
3. #ouch inish after boo scanning is completed
6. ress the Start ey
-
8/19/2019 User Manual bizhub 350
10/28
#oo$let Creation
1. #ouch ,--lication
". #ouch Boo* co-'/e-eat
&. #ouch Boo*let
. ress the Start ey
Page Margin
1. #ouch ,--lication
". #ouch Page Margin
&. !elect the position of =age Margin?
. #ouch .1 to confirm
. ress the Start ey
%rase
1. #ouch ,--lication
". #ouch Erase
&. !elect the position and >idth
. #ouch .1 to confirm
. ress the Start ey
-
8/19/2019 User Manual bizhub 350
11/28
!mage Settings
a&' Set (umbering
1. #ouch ,--lication
". #ouch #mage Setting
&. #ouch Set umbering
. 0nput Starting o4
. !elect irst Page or ,ll Pages
2. !elect (ar*er / )ighter
3. ress the Start ey
b&' Stamp
1. #ouch ,--lication
". #ouch #mage Setting
&. #ouch Stam-
. !elect Coni$ential / Co-'
. !elect irst Page or ,ll Pages
2. ress the Start ey
-
8/19/2019 User Manual bizhub 350
12/28
S topp ing or elet ing a )o b
1. *ress the Sto- key
2. Touch the button for the +ob to be deleted
-
8/19/2019 User Manual bizhub 350
13/28
*ax / Scan
There are 5 $ierent touch -anel6
1. .ne Touch
". Search
&. (irect #n-ut
. &ualit'/e$uction
. a+ Menu
ONE TOUCH SE!CH D"!ECT "N#UT
$U%"T& / !EDUCT"ON F' (ENU
-
8/19/2019 User Manual bizhub 350
14/28
S topp ing or elet ing a )o b
-
8/19/2019 User Manual bizhub 350
15/28
74 Press 8tilit'/Counter
24 Press 8ser Set
34 Press a+
94 Press .ne Touch
54 Select .ne Touch to eg4
:4 #n-ut .ne Touch ame ;ma+ 72 characters<
=4 Press e+t
>4 Press a+ ? @3A7
BBFor scan to email, press PC and then select Email
4 Press e+t
704 Enter a+ umber
input email address if you >an to scan to email
774 Press e+t
724 Press Enter 9 times
734 Press E+it
Delete One +ouc, ey
74 Press 8tilit'/Counter
24 Press 8ser Set
34 Press a+
94 Select the *e' that 'ou Dant to $elete
54 Press (elete
:4 Press Enter
-
8/19/2019 User Manual bizhub 350
16/28
Set One +ouc, *ax ocument t,roug, f eeer
a+ (ocument through automatic $ocument ee$er
7 ress the a+ / Scan ey
2 #ouch .ne Touch ey to select the stored address
+r #ouch (irect #n-ut ey to input the fa: address
(For the multi destination, touch the e+t (est4 ey to input the ne:t address. #he
ma:imum multi destination for direct input is 1" addresses. And the ma:imum
multi destination for one touch is &;; addresses.)
& For double size scanning or other setting, touch a+ Menu ey. (refer to the ne:t
page)
9 ress the Start ey
-
8/19/2019 User Manual bizhub 350
17/28
*ax Docum ent t,roug, t,e ori gina l gla ss
a+ (ocument through original glass
1 lace the original document on the original glass
" #ouch the .ne Touch ey to select the stored address
3 After scanning, touch the inish ey and press the Start ey
(For multi original document, press the Start ey after scanning each page. /astly, touch the
inish ey and press the Start ey)
-
8/19/2019 User Manual bizhub 350
18/28
#rocacas t *unction
Broa$cast can let you scan or fa: to multi destination.
After you select the desired destination, you >ill see the follo>ing panel after you press the Start ey. 0f you >ish to chec the destination, touch the Enter
ey. ou >ill see all selected destination again. ress the Start ey to confirm
to send.
-
8/19/2019 User Manual bizhub 350
19/28
C,ange *ax / Scan Setting !
C,ange Scan Quality
). Quality
1 #ouch $ualit) / !e*u+tion
2 #ouch $ualit)
3 !elect Stan*ar* / Fine / Super Fine
B). Density
1 #ouch $ualit) / !e*u+tion
" #ouch Densit)
3 Select Dar,er or %ighter
C). Reduction
#ouch uto Si-e
D). Original document size
Scan s-ecial size touch Set .riginal
size
Select original size
-
8/19/2019 User Manual bizhub 350
20/28
F' (ENU
C,a n ge * a x /S can Se tting !!
Set 1
TS" **(refer to the register information of +S! )
ress Fax/S+an . touch Fax (enu . touch TS" . to select the preCset
company information ;7A>< .
#ouch Enter to select the fa: destination and press Start to send out
e gist e r T S #
1C #ouch Utility
"C #ouch Admin Management to ey in theadminister pass>ord
&C #ouch 7nter to select Admin 1
C #ouch 0nitial !etting and 7nter
C !elect #!0 5egistration
2C !elect position (1C6) to input the company
name and fa: number
3C #ouch ame and 7nter
Double Si*e* T'
(Dust for the machine >hich already eEuipped document feeder FC2;)
ress Fax/S+an . #ouch Fax (enu. #ouch 2si*e* T'. ress Start
T' !eport
*ress Fax/S+an . Tou+h Fax (enu.
#ouch T' !eport to select
ON / "F T' Fails / O00
-
8/19/2019 User Manual bizhub 350
21/28
Net
ou can change the setting for
scanning document into '
Sub+e c t Sel. BB(refer to the belo> procedure to register sub the belo> procedure to select the stored sub
-
8/19/2019 User Manual bizhub 350
22/28
S to p t,e fax ialing / s e n in g
1. *ress Stop ey
2. Select Dialing
3. Touch Enter to confir"
!ese n * t he F a x Do+ u m e nt
#ouch 5ob %ist to select T)pe
#ouch !etr) to resend fa: document. 0f you >ant to change the fa: number, touch to
Change Destination.
** For the first 20 waiting retry fax document, you can change the fax number and resend the
fax document.
Che + , the F a x in / F a x o u t ! eport
1 #ouch 5ob %ist
2 #ouch Fax
34 !elect to chec the report
-
8/19/2019 User Manual bizhub 350
23/28
T o Clear a -a - er mis e e$
or the p#per "isfeed in
74 ull up the le4er for the misfeedC
clearing co4er, and then open the co4er
2 'arefully pull out any misfed paper and s>ing up the document guide le4er if
necessary
Ghile supporting the document feed tray >ith your right hand, carefully pull out
any misfed documents.
-
8/19/2019 User Manual bizhub 350
24/28
4
BB Ghen the message HMisfeed detected” appears, please follo>
/ocation of paper misfeed
1 2
ull out the rightCside door release le4er 'arefully pull out any misfed paper
'arefully pull out any misfed paper around the image 5emo4e misfed paper from the bypass tray
transfer roller in the duple: unit
ull out the lo>er rightCside door release
lea4er, and then open the lo>er rightCside
door of the paper feed unit.
'arefully pull out any misfed paper
-
8/19/2019 User Manual bizhub 350
25/28
! e p l a + in g T on er 6ot t les
rocedureI
BB #he ad4ance message sho>n belo> appears >hen toner is about to run out
74 24
34 94
54 :4
-
8/19/2019 User Manual bizhub 350
26/28
Chec * Mete r ea$ing
74 +pen the front door
24 #he meter counter is
-
8/19/2019 User Manual bizhub 350
27/28
Supplementary
Notes
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
-
8/19/2019 User Manual bizhub 350
28/28
Supplementary
Notes
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC