8/11/2019 Usb Hart Modem

1/3

USB HART MODEM

MACTek(R) VIATOR(R) HART(R) Interface Installation Instructions

(c) Copyright MACTek Corporation, 2002-2010. All rights reserved.

Revision 3.1 Release Date July 2010

VIATORCheckBT.exe Revision 3.1.3861VSPCF.exe Revision 3.1.3861

This file contains supplemental installation information for the followingVIATOR HART Interfaces:

- MACTek VIATOR USB HART Interface- MACTek VIATOR PCMCIA HART Interface- MACTek VIATOR RS232IS HART Interface- MACTek VIATOR RS232 HART Interface- MACTek VIATOR BT HART Interface

All documentation, utilities, and drivers (if required) can be accesseddirectly from the CD, or copied to your hard drive by the installer.

Contents:

- INSTALLATION- CD LAYOUT- CUSTOMER SUPPORT

INSTALLATION:

- If the CD does not autorun, launch "setup.exe".

- You will be prompted for your interface type.

- Select any additional hardware documentation you may want.

- Drivers will be installed for plug-n-play modems elected.

- If a plug n play interface is connected before the software installation,setup will update the drivers (if older).

- If an error is displayed when installing VIATORCheckBT(TM) that has awindow called Just-In-Time Debugging with the error message "An exception'System.IO.FileLoadException' has occurred in DefaultDomain" the .NETframework is not installed. Please install the .NET framework 2.0 from theMicrosoft Update service or Microsoft's website. If you do not have internetservice there is an installation file on the MACTek VIATORCheckBT CD under

8/11/2019 Usb Hart Modem

2/3

Extras.Updates for the .NET framework are not included on the CD.

- If using the USB VIATOR Modem and this is a new install please plug the USBModem in before installing the software. If there are any problems ingetting the device to be recognized after installing VIATORCheckBT(R) and itasks for a driver disk then indicate the driver is located in theinstallation directory (default is C:Files\VIATOR files from MACTek) underMACTek USB Driver or on the CD under \USB Driver.

- The MACTek PCMCIA VIATOR Modem driver is not supported in thisinstallation.

- There are several additional packages that are provided with VIATORCheckBTon the CD. The following packages may be found under the folder Extras :

Adobe Reader v8.11 - used to view the manual and other documents.Microsoft .NET 2.0 - needed for VIATORCheckBT.

A HARTCommDTM package can be found at the top level of the CD:HARTCommDTM folder - HARTCommDTM v1.2 from CodeWrights - used with FDTframe applications such as PACTware that require a communications DTM.

Install these packages by going to the Extras folder on the CD and doubleclicking the executable file associated with that package name. TheHARTCommDTM can be installed by running setup.exe in the HARTCommDTM folderat the top level of the CD. Follow the instructions found on theinstallation software screens to complete the installation. For additionalinformation or to check for the latest version of the HARTCommDTM visitwww.codewrights.biz/products/HARTCommDTM .A newer version of all these software packages may be available on theinternet. Check www.adobe.com for Adobe Readersoftware, www.microsoft.com for the .NET 2.0

Framework and the MACTek website www.MACTekcorp.com for the CodeWrights CommDTM software orVIATORCheckBT.

Windows is a registered trademark of Microsoft Corporation in the UnitedStates and other countries. Windows Vista is either a registered trademarkor trademark of Microsoft Corporation in the United States and/or othercountries.

MACTek and VIATOR are registered trademarks of the MACTek Corporation.VIATORCheckBT is a trademark of the MACTek Corporation.

HART is a registered trademark of the HART Communication Foundation.

The Bluetooth word mark and logo are registered trademarks and are owned bythe Bluetooth SIG, Inc.

CD LAYOUT:

- The CD ROOT directory contains the installer files and driver files for

8/11/2019 Usb Hart Modem

3/3

plug n play interfaces.

- \ExtrasContains several optional installation packages.

- \USB DriverContains the USB driver files if necessary to install manually.

- \GPLContains source code for com0com that is used with VSPCF.

- \HARTCommDTM Contains a HARTCommDTM v1.2 from CodeWrights used with FDTFrame Apps.

CUSTOMER SUPPORT:

Please contact us for technical assistance, troubleshooting, productrecommendations or application questions.

- Online: http://www.mactekcorp.com/support.html

- Phone: (330) 487-5477Monday-Friday9:00am - 4:00pm EST

__________________________________________________________________

VIATORCheckBT contains a modified free software application com0com

Copyright (c) 2006-2008 Vyacheslav Frolov

This program is free software; you can redistribute it and/or modify it underthe terms of the GNU General Public License as published by the Free Software

Foundation; either version 2 of the License, or (at your option) any laterversion.

This program is distributed in the hope that it will be useful, but WITHOUTANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESSFOR A PARTICULAR PURPOSE. See the GNU General Public License for moredetails.

You should have received a copy of the GNU General Public License along withthis program; if not, write to the Free Software Foundation, Inc., 59 TemplePlace, Suite 330, Boston, MA 02111-1307 USA