U.S. Architectural Supplement 2009

Architectural Supplement

2

Haddonstone has the world’s most comprehensive collection of fine architectural cast stone, landscape ornaments and mantles. This Architectural Supplement contains an extensive range created specifically for the US market and is offered in addition to the company’s standard collection.

Established in 1971, Haddonstone has expanded to become an international group with offices and manufacturing facilities in both the United Kingdom and the United States of America.

If this is your first introduction to Haddonstone, we hope that you will shortly be joining the many leading architects, landscape designers, contractors, specifiers, interior designers and private clients that we already serve.

All our designs can be viewed on our comprehensive website www.haddonstone.com

INTRODUCTION

WHY HADDONSTONE?Haddonstone is a unique form of cast limestone with a surface texture similar to cut limestone. The material matures and weathers like natural stone yet normally costs significantly less than quarried stone.

The ability to mold the Haddonstone material into almost any shape – faithfully reproducing new designs or producing replicas that are virtually indistinguishable from an antique original – has won the company numerous contracts ranging from prestigious residential projects and leading international hotels to retail and commercial developments.

The material used in every design exceeds the requirements of the United Kingdom Cast Stone Association and complies with all relevant UK and European standards. TecStone also meets the requirements of all US standards.

TecStone is a denser material than traditional semi-dry cast Haddonstone, and it has a smoother finish. TecLite is a light-weight cast stone material, closely resembling traditional Haddonstone. The use of thin wall construction and GFRC technology means the component weight of TecLite is reduced by up to two thirds when compared with similar Haddonstone pieces.

Each design is handmade by Haddonstone using molds created within the company’s extensive mold shops and studios. Using these same facilities Haddonstone can even manufacture custom stone pieces to practically any shape or size.

As Haddonstone maintains original models and/or molds for every single design in the standard collection, and utilizes the very latest vapor curing technology, customers can be reassured that the high quality of each stone produced is incredibly consistent yet retaining the individuality of a handmade product.

Craftsman at work in Haddonstone’s studios.

Haddonstone at the Omni Shoreham Hotel in Washington DC.

3

HADDONSTONE (USA) LTDHaddonstone (USA) Ltd was founded in 1990, initially importing products into its New Jersey warehouse from the United Kingdom based parent company.

Haddonstone opened an impressive manufacturing facility in Colorado in 1996 to provide mold-making, Haddonstone production and extensive storage space. The site has been subsequently extended to enhance additional facilities, whilst also introducing TecStone and TecLite production areas.

Haddonstone is world renowned for landscape ornaments and architectural cast stone. Normally associated with traditional or classical design, the company has further enhanced its reputation by incorporating designs of contemporary style within its range.

CHOOSING A COLORHaddonstone is available in three different standard colors: Portland 01, Bath 02 and Terracotta 04. There are four non-standard colors available at additional cost: Coade 05, Slate 06, Sienna 08 and Wheat 09. TecStone and TecLite are available in five different standard colors: Portland 01, Bath 02, Terracotta 04, Coade 05 and Slate 06. There are two non-standard colors available at additional cost - Sienna 08 and Wheat 09. We also offer custom colors.

Portland 01 Terracotta 04Bath 02

Haddonstone’s plant in Pueblo, Colorado.

Slate 06Coade 05 Sienna 08 (non-standard) Wheat 09 (non-standard)

Please note that, throughout this Architectural Supplement, the photographs show Haddonstone pieces of various ages and stages of maturity. The special qualities of Haddonstone ensure weathering of pieces, dependant upon climate and location. The colors reproduced in this supplement are as accurate as the printing process will permit. Cast stone color samples are available upon request.

This is a very special type of balustrade and can be offered, as standard, only in the components and dimensions indicated in the table below.

Spiral Balustrade

TS Tech Sheet No. B50, GAR1, USB61

Non Standard Balusters Unless otherwise stated, these balusters are circular in section except top and bottom blocks which are square.

The standard components shown create an alternative assembly system designed to comply with Building Codes that require a minimum 42” overall height and must not permit a 4” sphere to pass through any point in the system. If local Building Codes require a minimum 36” overall height, simply remove the T937 Under Coping.

Refer to main Haddonstone catalog for further options.

ARCHITECTURAL STONEWORK

4

BALUSTRADING

Dimensions exclude joints. Allow 1/4” for joints Dimensions exclude joints. Allow 1/4” for joints

Note: Photograph shows alternative system.

As an alternative to Haddonstone’s standard Parapet Screening, this is a heavier version designed to comply with Building Codes that require a minimum 36” overall height and must not permit a 4” sphere to pass through any point in the system.

As shown in the drawings, the length of parapet unit can be varied by using combinations of the two basic panels JU248 and JU362. We show six of the most commonly used bays (TYPES A-1 to F-1). The piers are specially designed and produced for end, center and corner use as well as for 135o angles; so when ordering please state clearly the number and reference of each type required. All rails and plinths are supplied in standard lengths as indicated in the price list, cutting to final specification to be undertaken by your installation contractor.

TS Tech Sheet No. USPS1


PARAPET SCREENING

5


Dimensions exclude joints. Allow 1/4” for joints


GATE PIERS

6


QUOINS


Alternative Gate Pier Caps and Strings:

TS Tech Sheet No. USM23

Refer to main Haddonstone catalog for further options. 7Dimensions exclude joints. Allow 1/4” for joints

Haddonstone has a large selection of Pier Cap designs in a range of sizes. If your requirements are not featured we can produce custom designs to your specifications.

For Finials and Balls & Bases to complement our range of Pier Caps refer to the Haddonstone catalog.


PIER CAPS

8


Refer to main Haddonstone catalog for further options. 9

PIER STRINGS

The Haddonstone collection includes copings and cappings in many designs. Requirements for straight flat runs of wall, curved wall sections, ramped walls, serpentine walls and stepped walls can be met from our standard range.

We would be pleased to discuss your special requirements.

For standard lengths, please refer to the price list. All copings and cap-pings are supplied with drip edge.


COPINGS

10



PLINTH & STRING COURSES

11


CLADDING & BLOCKS

TecLite Cladding - 24” length

Plain - 36” length Single Chamfer - 36” length

Double Chamfer - 36” length Single Bullnose - 36” length

Moulded Bullnose - 36” length

Blocks/Cladding - 24” length

TS Tech Sheet No. USC21 for MU7TS Tech Sheet No. USC11 for MU4 & MU5TS Tech Sheet No. USC70 for MU6TS Tech Sheet No. USC71 for MU665TS Tech Sheet No. USC41 for M200TS Tech Sheet No. USC80 for MU950TS CAD1 Column Assembly Details


COLUMNS & PILASTERS

12



13Dimensions exclude joints. Allow 1/4” for joints

14

COLUMNS & PILASTERSARCHITECTURAL STONEWORK


TS Tech Sheet No. USDS11


DOOR SURROUNDARCHITECTURAL STONEWORK

15Dimensions exclude joints. Allow 1/4” for joints

Portico AU Components

Portico BU Components

TLLU210 Upper CorniceTLLU220 Lower Cornice (with dentils)TLLU230 ArchitraveTLLU235 Lower CorniceM4 Column

TLLU110 Cornice TLLU130 ArchitraveM7 Column

TS Tech Sheet No. USPT12 & USPT13

TS Tech Sheet No. USPT22 & USPT23


PORTICOSARCHITECTURAL STONEWORK

16 Dimensions exclude joints. Allow 1/4” for joints Dimensions exclude joints. Allow 1/4” for joints

ALTERNATIVE HEAD CONFIGURATIONALTERNATIVE HEAD CONFIGURATION

MEDITERRANEAN WINDOW SURROUND - QU385

TS Tech Sheet No. USWS10, USWS20, USWS30 & USWS40


WINDOW SURROUNDS

17


Dimensions exclude joints. Allow 1/4” for joints

LANDSCAPE INSPIRATIONS

18

Florentine Urn A290 Large Elizabethan Jardiniere A272 Acanthus Leaf Ball & Base E080A/ E120C

Venetian Trough A650 & Fluted Supports A670 Raphael Seat D500

Eton College Fountain C3600, Large Pool Surround C4Land custom architectural designs.

Westonbirt Urn A755

Alongside the company’s extensive architectural range, Haddonstone is also able to offer a comprehensive collection of landscape ornaments from water features, sundials and planters to statuary, seats and structures.

19

ARCHITECTURAL & LANDSCAPE INSPIRATIONS

Zambelli Plaza, New Castle, PA Ledson Winery, Kenwood, CA Vintage Park, Houston, TX

Uptown Altamonte, Altamonte Springs, FL

Roosevelt Park, Chicago, IL 127th Street, New York, NY

32207 UNITED AVENUE • PUEBLO • CO 81001 • USA(719) 948-4554 • [email protected] • www.haddonstone.com

A selection of recent projects from Haddonstone (USA) Ltd

ARCHITECTURAL INSPIRATIONS

1/09

U.S. Architectural Supplement 2009

Documents

Transcript of U.S. Architectural Supplement 2009