UPS Pickup Point
Transcript of UPS Pickup Point
UPS Driver Procedure:
1. Scan barcode (below) 2. Scan and pick up all packages
120 SOUTH STREET, PITTSFIELD, MA 01201, US
Pickup Point
Pickup Point ID
7LY112A47
UPS
Enter Pickup Point ID:
7LY112A47
and Postal Code
01201
Request pickup at ups.com/upp
Enter Pickup Point ID: and Postal Code: 01201
MON TUE WED THU FRI SAT
MON TUE WED THU FRI SAT
Be ready for pickup by:
03:00 PM 03:00 PM 03:00 PM 03:00 PM 03:00 PM
04:00 PM 04:00 PM 04:00 PM 04:00 PM 04:00 PM
In some cases,later pickups might be possible.Go to ups.com/upp to request an on Demand Driver
®
Sign up fortext or email
Pickup status Alerts:ups.com/upp
For additional assistance, please call 1-844-4UPS-LAB (1-844-487-7522)
7LY112A47
Requests must be made at least ONE HOUR before pickup time, or before:
Follow the steps below to begin service
DISPLAY YOUR PLACARDSelect a prominent location that accommodates your expected outgoingshipment volume
Ensure the placard is visible and easily accessible to your driver, with respect to yourbusiness hours and any locked doors
Avoid areas where theft may occur
VERIFY YOUR PLACARD HAS BEEN DISPLAYED
Update the following information on the page:
PROVIDE YOUR PLACARD LOCATION DETAILS
©2022 United Parcel Service of America, Inc. UPS, the UPS brandmark and the color brown are trademarks of United Parcel Service America, Inc. All rights reserved.
Pickup Point InstructionsUPS
Non Metal Box
Metal Box
Pickup Location (choose inside or outside)
Placard Location (select from drop down – i.e. front door, reception, etc.)
Additional Location Details – allows up to 40 characters of additional driver instructions
Select Submit
Toggle Will your packages be placed in a metal box? from No to Yes
Enter the Lock Combination; if there is no combination, enter none
If you need to report any changes after confirming your placard, send an email to: [email protected]. Include your 9-digitPickup Point ID in the subject line, and provide details of the requested changes. You will receive an email from UPS Lab Logisticsconfirming these changes, along with an updated temporary placard, if necessary.
To schedule service prior to your first scheduled pickup date, please call 1-844-4UPS-LAB (1-844-487-7522).
Change the My placard has been displayed radio button from No to Yes
Select your preferred Pickup Start Date (UPS will confirm your actual startdate)
Select Add a Photo to upload your photo
Select Next
Save the photo to your computer (4MB size limit - .jpg, .jpeg, .png, .gif and .bmpfiles only)
Open the original email and select the Confirm Placard Display button, or go towww.ups.com/upplm/dashboard
Note: If you are using a specimen box, the placard must be affixed to the top of thebox, and if a lock is used, a combination is required (Keyed locks are not allowed)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ii.
i.
iii.
iv.
®
The remaining steps are the same as above
Take a photo of the properly displayed placard. Note: The photo should be takenfrom 10'–15' away to provide UPS Operations with a visible reference of thelocation