Power point presentation on SOLAR POWER BASED UPS
-
Upload
rasoashley -
Category
Documents
-
view
880 -
download
6
Transcript of Power point presentation on SOLAR POWER BASED UPS
![Page 1: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/1.jpg)
SOLAR-BASED SOLAR-BASED UNINTERRUPTED POWER UNINTERRUPTED POWER SUPPLY (UPS)SUPPLY (UPS)
By C. Krishna Sunder (07841A0222)
I. Sireesha (07841A0218)
![Page 2: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/2.jpg)
ABSTRACTABSTRACT
Photovoltaic (PV) solar cells are semiconductor devices that convert sunlight into direct current (DC) electricity.
Groups of PV cells are electrically configured into modules and arrays.
With the appropriate power conversion equipment, PV systems can produce alternating current (AC) compatible with any conventional appliances, and operate in parallel with and interconnected to the utility grid.
![Page 3: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/3.jpg)
PV ARRAY + BALANCE OF SYSTEM COMPONENTS = PV SYSTEM
![Page 4: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/4.jpg)
BLOCK DIAGRAM OF SOLAR BASED BLOCK DIAGRAM OF SOLAR BASED UPSUPS
PV ARRAYS
CHARGE CONTROLLER
BATTERY INVERTER
AC LOAD
DC LOAD
![Page 5: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/5.jpg)
PV TECHNOLOGYPV TECHNOLOGY
Photovoltaic (PV) solar cells as they are often referred to, are semiconductor devices that convert sunlight into direct current (DC) electricity.
A MODULE is the basic building block of photovoltaic systems.
Groups of modules can be interconnected in series and/or parallel to form an ARRAY.
![Page 6: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/6.jpg)
Working of PV cell
![Page 7: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/7.jpg)
TYPES OF PV CELLSTYPES OF PV CELLS
There are four types of PV cells Multicrystalline silicon Monocrystalline silicon Ribbon silicon Thin-film
![Page 8: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/8.jpg)
PHOTOVOLTAIC MODULE PERFORMANCEPHOTOVOLTAIC MODULE PERFORMANCE
Electrical characteristics of photovoltaic modules determine the compatibility with loads.
I-V (current-voltage) curve gives the electrical characteristics.
The current-voltage (I-V) curve is based on the module being under standard conditions of sunlight and module temperature.
It assumes there is no shading on the module.
![Page 9: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/9.jpg)
A TYPICAL CURRENT VOLTAGE
CURVE
![Page 10: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/10.jpg)
FACTORS EFFECTING OUTPUT OF MODULESFACTORS EFFECTING OUTPUT OF MODULES
Tilt Shadowing Temperature of the module Orientation Sunlight conditions Less than one sun will reduce the current output of the module by a
proportional amount.
![Page 11: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/11.jpg)
I-V Curve for an Unshaded Module and for a Module with One Shaded Cell.
I-V Curve for a Module at 250C (770F) and 850C (1850F)
![Page 12: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/12.jpg)
PHOTOVOLTAIC ARRAYS AND MOUNTINGPHOTOVOLTAIC ARRAYS AND MOUNTING
Modules can be connected in series, parallel, or both to increase either output voltage or current to form Arrays.
Combinations of series and parallel connections are also used in arrays. Different types of arrays are developed with different features.
Various ways in which a PV array can be mounted on a building.
• Bracket mounting
• Pole mounting
• Structure mounting
![Page 13: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/13.jpg)
SOLAR CHARGE CONTROLLERSOLAR CHARGE CONTROLLER
The primary function of a charge controller in a stand-alone PV system is to maintain the battery at highest possible state of charge while protecting it from overcharge by the array and from over discharge by the loads.
The important functions of solar charge controller are:
1. Prevent Battery Overcharge
2. Prevent Battery Over discharge
3. Provide Load Control Functions
![Page 14: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/14.jpg)
MAXIMUM POWER POINT TRACKING(MPPT)MAXIMUM POWER POINT TRACKING(MPPT)
![Page 15: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/15.jpg)
THERE ARE THREE TYPES OF CHARGING PROCESSESTHERE ARE THREE TYPES OF CHARGING PROCESSES
Bulk charge Absorption charge Float charge
![Page 16: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/16.jpg)
UN-INTERRUPTIBLE POWER SUPPLYUN-INTERRUPTIBLE POWER SUPPLY
Rectifier & battery charger
Battery
Inverter
![Page 17: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/17.jpg)
BATTERIESBATTERIES
primary functions of a storage battery in a PV system are to:
- Energy Storage Capacity and Autonomy.
- Voltage and Current Stabilization.
- Supply Surge Currents. Two types of storage batteries: Primary and Secondary. There is no “perfect battery” suitable for PV systems in general. Typical batteries used in stand-alone PV systems can deliver up to several
thousand amps under short-circuit conditions, requiring special precautions.
![Page 18: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/18.jpg)
BATTERY SELECTION CRITERIABATTERY SELECTION CRITERIA
Selection of battery depends upon very many factors and will be influenced by system management and climatic conditions.
Special requirements made of the battery in operation can be broadly classified according to :
1. The operating time per year.
2. The type of loads (high or low power drain).
3. The number of cycles per week.
• In general, transparent housings should be preferred.
![Page 19: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/19.jpg)
FACTORS EFFECTING BATTERY FACTORS EFFECTING BATTERY PERFORMANCEPERFORMANCE
Corrosion Battery Gassing Sulfation Stratification Temperature
![Page 20: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/20.jpg)
WORKING OF SOLAR BASED UPS WORKING OF SOLAR BASED UPS SYSTEM SYSTEM
Two types of PV systems
GRID CONNECTED PV SYSTEMS STAND ALONE PV SYSTEMS
![Page 21: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/21.jpg)
GRID CONNECTED PV SYSTEMSGRID CONNECTED PV SYSTEMS
Operate in parallel with and interconnected with the electric utility grid.
Back-feeds the grid when the PV system output is greater than the on-site load demand.
![Page 22: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/22.jpg)
GRID-INTERTIED SOLAR-ELECTRIC GRID-INTERTIED SOLAR-ELECTRIC SYSTEMS WITH BATTERY BACKUPSYSTEMS WITH BATTERY BACKUP
![Page 23: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/23.jpg)
STAND ALONE PV SYSTEMSSTAND ALONE PV SYSTEMS
![Page 24: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/24.jpg)
Operate independent of the electric utility grid.The load only operates during sunlight hours.For maximizing the power transfer from the array to the
load, impedance matching is to be optimized.Optimum matching for resistive loads can be as high as
94.34% at 25 C. Optimum matching factor for electrolytic loads is
99.83% at 25C.
![Page 25: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/25.jpg)
ECONOMY OF SOLAR BASED UPSECONOMY OF SOLAR BASED UPS
Based on two factors
- Energy payback time
- Energy returned on energy invested (EROEI)
• Another factor – Grid parity
![Page 26: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/26.jpg)
S.NO Functions SAPV ( Euro million)
Thermal ( Euro million)
1 Installation cost
of Power Plants
17 104.35 12 274.44
2 Transmission
and distribution
Nil 5521.45
3 Production cost
Nil 5809.37
COST COMPARISON OF SAPV PANELS VERSUS THERMAL
![Page 27: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/27.jpg)
ADVANTAGESADVANTAGES
Saves your money Environmentally friendly Independent/ semi-independent Low Maintenance
![Page 28: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/28.jpg)
APPLICATIONSAPPLICATIONS
Remote weather monitoring system.Remote communication system.Satellite communication.Solar power based transport system.
![Page 29: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/29.jpg)
CONCLUSIONCONCLUSION
High life of the equipment.
The excess generated power can be pumped in to the grid.
Per unit cost is much less when compared with the power supply companies.
Power can be supplied to both DC and AC loads.
![Page 30: Power point presentation on SOLAR POWER BASED UPS](https://reader033.fdocuments.in/reader033/viewer/2022061501/5520d9f54a795963718b4964/html5/thumbnails/30.jpg)
QUERIESQUERIES