Uplink Load
1
Generally, the uplink load threshold is 75% and the corresponding RTWP is smaller than –100 dBm. The corresponding equivalent number of users (ENU) ratio should be smaller than 75% if the power-based admission decision is based on algorithm 2 (the algorithm for the ENU). If the RTWP value is larger than –100 dBm, the cell is overloaded in the uplink direction. Generally, if a cell is overloaded or the RTWP value is too large, the cell coverage decreases, live service quality declines, or new service requests are rejected. Huawei RNCs support the following RTWP and ENU counters:
-
Upload
thildathilda -
Category
Documents
-
view
212 -
download
0
description
Uplink Load
Transcript of Uplink Load
Generally, the uplink load threshold is 75% and the corresponding RTWP is smaller than 100 dBm. The corresponding equivalent number of users (ENU) ratio should be smaller than 75% if the power-based admission decision is based on algorithm 2 (the algorithm for the ENU).If the RTWP value is larger than 100 dBm, the cell is overloaded in the uplink direction.Generally, if a cell is overloaded or the RTWP value is too large, the cell coverage decreases, live service quality declines, or new service requests are rejected.Huawei RNCs support the following RTWP and ENU counters: