Review Article Radiofrequency Catheter Ablation of Idiopathic Right Ventricular Outflow Tract
Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design
-
Upload
insidescientific -
Category
Science
-
view
1.266 -
download
1
Transcript of Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design
![Page 1: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/1.jpg)
Understanding Ventricular Pressure-Volume Calibration and Experimental Design
Dr. Dimitrios "Jim" GeorgakopoulosChief Scientific Officer, Sunshine Heart, Inc.
![Page 2: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/2.jpg)
InsideScientific is an online educational environment designed for life science researchers. Our goal is to aid in
the sharing and distribution of scientific information regarding innovative technologies, protocols, research
tools and laboratory services.
![Page 3: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/3.jpg)
Today’s Lecture…
1. Introduction to PV
2. Starting with the end in mind
3. Stroke Volume Calibration
4. Parallel Volume Correction
5. What does it all mean?
![Page 4: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/4.jpg)
Why Pressure Volume?
LV Volume (µL)2520151050
LV
Pre
ssure
(m
mH
g)
0
50
100
ESPVR: Pes = 6.857 * Ves + 29.165, r² = 0.9909
EDPVR: Ped = 0.1509 * exp(0.1488 * Ved), r² = 0.9512
LV Volume (µL)2520151050
LV
Pre
ssure
(m
mH
g)
0
50
100
• Intrinsic cardiovascular condition can be assessed during changing load conditions
• Load-Independent can be data important when making hemodynamic assessment of conditions that may effect preload or afterload.
• Multi-segments useful assessing dysynchrony
• The only method which provides the gold standard of diastolic function, EDPVR.
Catheter-based Pressure-Volume studies provide global assessment of the heart and vascular system.
![Page 5: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/5.jpg)
Introduction to PV Theory
• Catheters consist of a single pressure sensor and 4 or more electrodes for volume measurement
• Outer electrodes provideexcitation to the ventricle, inner electrodes measure conductance between them.
• During diastole, blood volume increases and conductance increases. Both decrease during systole.
Introduction to PV Theory
![Page 6: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/6.jpg)
Conductance to Volume…
A
LR r=
2
RL
RL
LLAV rr ===
L A
R = Resistance
V = Volume
r = Blood Resistivity
Ohm’s Law:
where…
I = current (constant)
V∞ R
![Page 7: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/7.jpg)
Introduction to PV Theory
Why must we calibrate PV?
Location…Location…Location!
![Page 8: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/8.jpg)
The necessity of calibration is derived from the variability inherent to the measurement, and variability between animals
• Catheter placement is the most important variable
• The composition of the myocardium can vary between every animal, especially in in disease conditions.
• Can directly effect the electrical properties of the myocardium, and by extension the measured conductance
• Calibration is important if done correctly, reduces variability of the data minimizing the number of animals required to show an effect, or lack of it.
![Page 9: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/9.jpg)
Calibration of Volume Signal
Reference methods as MRI, Echo, Angio
Parallel conductance by hypertonic saline (provide EF)
SV calibration flow probe, thermodilution
![Page 10: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/10.jpg)
Start With The End In Mind
Start With The End In Mind
• Care should be taken to understand which parameters are needed for your study.
– What physiological changes are taking place? And what PV parameters reflect these changes.
• Relative changes may be sufficient, depending on your experimental requirements (eg. Testing effects of a drug, acute changes in PV)
• All parameters, except EF, can be derived from SV calibration alone
– EDV, ESV, Max and Min Vol must be used as relative measures without parallel volume correction
?
![Page 11: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/11.jpg)
How do we calibrate PV?
• First, we attempt to quantify how changes in the volume of the blood pool affect the measured conductance
– Converts the measured conductance changes to stroke volume
– Can be derived from blood resistivity only, or can be made more accurate with adjustment based on a known Stroke Volume reference.
LV Volume (µL)40353025201510
LV
Pre
ssure
(m
mH
g)
-40
-20
0
20
40
60
80
100
120
LV Volume (µL)40353025201510
LV
Pre
ssure
(m
mH
g)
-40
-20
0
20
40
60
80
100
120
How do we calibrate PV?
![Page 12: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/12.jpg)
Blood Resistivity
• The simplest method to calibrate volume is using a set of reference blood volumes.
– Conductance is measured in a known cylindrical volume, this relationship is applied to the data.
– This is the most common method for calibrating stroke volume.
• May not account for all of the variability inherent to Pressure Volume recording
![Page 13: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/13.jpg)
Blood Resistivity
• Well volumes are recorded in your software and a calibration curve can be calculated
![Page 14: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/14.jpg)
Blood Conductance/Resistivity
• Blood conductance will rarely change… However, it may not always be possible to do a blood conductance measurement on every animal
– Multiple doses of a compound known to alter blood resistivity
– Effective calibration grouping should be considered when appropriate
• You may consider an adjustment based on a second measure of known stroke volume
![Page 15: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/15.jpg)
• Consider using a secondary measurement of SV or CO to provide further validation of your data accuracy
• These methods attempt to adjust the recorded SV, with or without a resistivity measurement, and match it with another known stroke volume
• Can be derived from Transit-Time Ultrasound measurement, thermodilution, or echocardiography
• Linear or non-linear approaches can be used based on your resources
Methods for SV Adjustment
![Page 16: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/16.jpg)
SV Adjustment
• Assumes a linear relationship between conductance and blood volume
• Favored when an alternative SV measure is available only as a discrete or single-sample value (Echo, Thermodilution, Transit-Time Ultrasound)
KnownPV SVSV /=
Methods for SV Adjustment
![Page 17: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/17.jpg)
Linear SV Adjustment
Linear SV Adjustment
Favored when an alternative method for continuous SV measurement is available (Transit-Time Ultrasound)
Non-Linear SV adjustment is foundational to admittance systems, and can be another approach to SV correction.
![Page 18: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/18.jpg)
Linear SV Adjustment
Linear SV Adjustment
Favored when an alternative method for continuous SV measurement is available (Transit-Time Ultrasound)
Non-Linear SV adjustment is foundational to admittance systems, and can be another approach to SV correction.
![Page 19: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/19.jpg)
What is a Known SV?
• Consider that a SV correction attempts to fit your PV loop data to a known SV
• Fitting all of your animals, or all animals in a group to a single SV value will invalidate this approach
• It is imperative to understand the variability in SV among groups
– Disease conditions often present a varying degree of change from control
– SV can only be considered an input that increases accuracy in Pressure-Volume data when the SV for the specific animal is known
“range of SV in control mouse strains is 14-26 μL”
Measurement of cardiac function using pressure–volume conductance catheter technique in mice and rats
Pál Pacher, Takahiro Nagayama, Partha Mukhopadhyay, Sándor Bátkai, and David A Kass
Nat Protoc. 2008; 3(9): 1422–1434.
![Page 20: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/20.jpg)
Considerations for SV Calibration
• This is the most critical part of your calibration
– All outputs parameters of your PV Loops are affected
• If using only resistivity as the calibration, consider if that value may be transiently affected by your interventions
• If SV adjustment is to be used, ensure that the SV applied to the fit is based on reasonable assumptions
Considerations for SV Calibration
![Page 21: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/21.jpg)
How do we calibrate PV?
• Next, we attempt to remove anyoffset in the measurement
– The largest offset in the measurement is typically due to the conductance of the myocardium contributing to the measured signal
– Termed parallel conductance or parallel volume
LV Volume (µL)40353025201510
LV
Pre
ssure
(m
mH
g)
-40
-20
0
20
40
60
80
100
120
LV Volume (µL)40353025201510
LV
Pre
ssure
(m
mH
g)
-40
-20
0
20
40
60
80
100
120
How do we calibrate PV
![Page 22: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/22.jpg)
Saline Bolus Injection
Increased Conductivity
x xx xxx
x x x x x
End-diastolic Volume (µL)80604020
End-s
yst
olic
Volu
me (
µL)
20
30
40
50Ves = 0.4484 * Ved + 12.926, r² = 0.9973
End-diastolic Volume (µL)80604020
End-s
yst
olic
Volu
me (
µL)
20
30
40
50
Saline Bolus Injection
![Page 23: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/23.jpg)
Saline Bolus Data Quality
PV Loop Demo.adicht
Pre
ssure
(...
0
50
100
Saline c
alibra
tion 1
Volu
me (
µ...
40
60
56:02 56:03 56:04 56:056 7
7/28/2011 11:57:50.839 AM
Salin
e B
olu
s
LV Volume (µL)706050403020
LV
Pre
ssure
(m
mH
g)
0
50
100
LV Volume (µL)706050403020
LV
Pre
ssure
(m
mH
g)
0
50
100
![Page 24: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/24.jpg)
Vp throughout the cardiac cycle
• Change in constant current parallel conductance has been shown to be minimal throughout the cardiac cycle
– E.B. Lankford, et. al “Does volume catheter parallel conductance vary during the cardiac cycle,” Am. J. Physiol. Heart Circ. Physiol. 258: H1933-H1942, 1990.
• The time-varying method used can be applied to conductance data if desired
• Later work has shown that complex admittance (using AC excitation) does change throughout the cardiac cycle
– Cl Wei, et.al “Evidence of time-varying myocardial contribution by in vivo magnitude and phase measurement in mice,” IEEE Eng Med Biol Soc. 2004;5:3674-7.
![Page 25: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/25.jpg)
Vp throughout the cardiac cycle
• Change in constant current parallel conductance has been shown to be minimal throughout the cardiac cycle
– E.B. Lankford, et. al “Does volume catheter parallel conductance vary during the cardiac cycle,” Am. J. Physiol. Heart Circ. Physiol. 258: H1933-H1942, 1990.
• The time-varying method used can be applied to conductance data if desired
• Later work has shown that complex admittance (using AC excitation) does change throughout the cardiac cycle
– Cl Wei, et.al “Evidence of time-varying myocardial contribution by in vivo magnitude and phase measurement in mice,” IEEE Eng Med Biol Soc. 2004;5:3674-7.
![Page 26: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/26.jpg)
Considerations for Parallel Volume
Considerations for Parallel Volume
• Ejection Fraction (EF) is the most important value for which the parallel volume adjustment is critical
• Degree of remodeling in disease conditions, along with individual variation in heart morphology and muscle fitness makes introduce variability between animals.
• Repeated saline calibrations can be difficult in some disease models.
• Saline can effect the utilization of calcium in the myocardium
• Consider whether transient changes in Vp could be present in your study LV Volume (µL)
40353025201510
LV
Pre
ssure
(m
mH
g)
-40
-20
0
20
40
60
80
100
120
LV Volume (µL)40353025201510
LV
Pre
ssure
(m
mH
g)
-40
-20
0
20
40
60
80
100
120
SV
EDV
EF = SV/EDV
Other affected parameters: all absolute Volume Parameters (ESV, EDV, Max and Min Vol, etc. (relative changes still meaningful)
![Page 27: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/27.jpg)
Other Accuracy Considerations
∙ ∙ ∙ ∙
1. Making Analysis and Calibration selections: - Linear Sections vs. Non Linear
2. Double Check Pressure Calibration at the study’s end
Other Accuracy Considerations
![Page 28: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/28.jpg)
Summary
• Ultimately, this is a hugely powerful set of data
• Important to consider the ultimate goal of your study in making decisions about study design
• Understand how the intervention you are making might change the calibration values
• Consider the inputs of your calibration, where do they come from, and how can you minimize variability?
• Choose your calibration procedure accordingly…try to be consistent
• No matter the procedure used, proper calibration should be your default procedure and should be done for each experiment
![Page 29: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/29.jpg)
Proven within the research community
Millar Mikro-tip catheters
and the conductance
method of calibration have
been tested and validated
as an accurate and
trustworthy combination
for research.
Click on publications
to view online…
![Page 30: Understanding Ventricular Pressure-Volume Catheter Calibrations and Experimental Design](https://reader031.fdocuments.in/reader031/viewer/2022022200/58a99b141a28abc2518b594f/html5/thumbnails/30.jpg)
Thank You!For additional information on ADInstruments solutions for pressure-volume loops, including Millar catheters, Pressure-Volume Hardware and associated data acquisition and analysis software please visit:
www.adinstruments.com/partners/millar