Underfloor Heating - solfex.co.uk · Underfloor heating can be installed within a variety of...

Underfloor Heating Product Guide & Price List 2017

2

Contents

4 - An Introduction to Underfloor Heating

7 - How SOLFEX energy systems can help you

8 - Online Services & Quick Quotation Calculator

9 - Contacts

10 - Underfloor Heating System Selector

12 - Rapid Clip Plate

14 - Staple

16 - Clip Rail

20 - WARM-BOARD

22 - WARM-BOARD Light

24 - WARM-BOARD End Support

26 - Case Study

28 - Floating NEO-FOIL

30 - Floating Heat Plate

34 - Suspended NEO-FOIL

36 - Suspended Heat Plate

38 - “Fit from below” Heat Plate

40 - Pipe Options

43 - Manifold and Mixer Packs

47 - Controls

53 - Electric Underfloor Heating Systems

57 - RapidSet

59 - Room Packs

3

Company IntroductionFor over a decade energy efficiency and heating installers have trusted SOLFEX energy systems to deliver there renewable energy products, underfloor heating components and systems are no exception to this. As part of the Travis Perkins PLC group of company’s we offer our customers a solid reliable distribution platform and underfloor heating expertise from a dedicated Underfloor Heating sales team.

SOLFEX energy systems can supply a vast range of underfloor heating products and services for various applications, from domestic residential housing utilising our unique and patent pending dry screed floor systems, to a bespoke system for commercial applications such as hotels, sports, leisure & care home facilities.

4

An Introduction to Underfloor Heating

Underfloor Heating vs Convectors

25°C - 29°C

20°C20°C

16°C

26°C24°C

Underfloor HeatingUnderfloor heating has now become the preferred form of space heating within the UK due to its increased efficiency and even thermal comfort. Underfloor heating systems work by distributing lower temperature warm water through a network of pipe work within the floor construction and beneath the finished floor level, this heat is carefully monitored and controlled by an advanced range of modern room thermostats to keep a constant ambient temperature throughout the property & individually for each zone.

Underfloor heating is now a complete solution for both existing and new construction homes, with a selection of systems to suit all scenarios; suspended floors, floating floors, low profile over floor and screed applications.

Advantages:

• Lower fuel costs compared to traditional radiators

• Ideal partner for renewable energy heating – i.e. Heat pumps

• Improved energy efficiency

• No risk of burning due to low surface temperatures

• Silent operation

• Low maintenance

• Long life (50 years for underfloor heating pipe work)

• Increased flexibility for occupants due to all of the walls being free from radiators.

• Less air movement due to lower convection currents, reducing the airborne spread of pollen and bacteria, thus, improving air quality.

5


Floor construction Underfloor heating can be installed within a variety of different floor constructions. The different floor constructions comprise of solid screed floors, suspended floors and floating floors. The insulation below the underfloor heating should be of an adequate thickness and resistance to restrict any downward heat loss.

Screed SystemsScreed systems rely on thermal conductivity to transfer heat from the pipes within the screed to the finished floor level. The makeup of a screed system consists of slab or oversite base, edge insulation around the perimeter of all walls to allow for expansion and contraction and to prevent heat conduction from the floor to the walls. A suitable insulation is then laid on top of the oversite and the underfloor heating pipes are fixed to the insulation with screed encasing the pipes.

Suspended FloorSuspended underfloor heating systems regularly use heat diffusion plates to dissipate the heat evenly. Insulation is tightly fixed between the joists and then the aluminium heat spreader plates are then laid on top of the joists and securely pinned. The underfloor heating pipe work is then fixed in to the plates according to the floor plan layout provided.

Floating FloorsFloating floor systems are laid directly on top of the existing floor eradicating the need to disturb the current floor structure. Floating floors comprise of either high density pre-grooved insulation with an added aluminium spreader plate to increase heat output or a low-profile high density pre-grooved gypsum panel which is supplied with unique plastic end supports which allow for multiple flow and return pipes and for the return bends.

Floor coveringsMost floor coverings are suitable for use with underfloor heating systems, below is a general overview of each floor covering.

Ceramic and stoneMost ceramic and stone based floor coverings offer the least resistance to heat transfer which makes these coverings the ideal partner for underfloor heating. When fitting these products a flexible adhesive must be used to allow for expansion and contraction to restrict the possibility of the finished floor from cracking or coming loose.

Vinyl floorVinyl flooring offers a low heat resistance and whilst most vinyl and plastic flooring is suitable for use with underfloor heating, we advise checking with the flooring manufacturer to ensure the chosen vinyl is suitable.

Wooden floorsTimber floors work well with underfloor heating. You will find that most underfloor heating should not exceed 27°C when wood flooring is laid. Care must be taken to ensure that the timber moisture content does not exceed 10% when the floor is laid, to prevent movement in the floor as the timber dries out.

CarpetsCarpet and underlay provides the highest heat resistance. You should make sure the underlay is suitable for the use with underfloor heating and has a low TOG value, the combined carpet and underlay should not exceed 2.5 TOG.

Thermal resistance

TOG Floor finish

0.00 m2K/W 0.02mm Vinyl tile, 5mm Ceramic

tile, 3mm Epoxy Coating

0.05 m2K/W 0.525mm Marble, Cushion

Linoleum

0.10 m2K/W 1.0 9mm Carpet Floor Tile, 13mm

Hardwood

0.15 m2K/W 1.5 Medium pile Carpet, Wood

Blocks, 22mm Timber Laminate

Thermal resistances for typical floor finishes adhering to the BS EN 1274 Part 2

If you are unsure about any aspect of either the floor construction or compatible floor finish please contact the SOLFEX UFH technical team

6

Controls Controls are an essential part of heating packs, be it for radiator or underfloor heating systems. Radiators are generally controlled by a single time clock with thermostatic radiator valves controlling each room’s individual room temperature, whereas underfloor heating usually has a single control thermostat for each room which carefully monitors and controls the temperature for that individual room.

Manifold Offering from 2 – 12 ports the manifolds are made of stainless steel and are provided with isolation valves and drain-off/air vent valves.

Thermostatic Mixing Valve and Circulating PumpA 3-port thermostatic mixing valve used to blend the water down to the desired temperature required for the underfloor heating system. Generally the TMV will be set around 45°C. An A rated circulating pump will be a part of the mixer set.

Actuators Actuators control whether a circuit is open or closed and offer more control over your underfloor heating system.

RoomInternal design temperatures

(/°C) from the UK national annex to BS EN 12831

Living room 21

Dining room 21

Bedsitting room 21

Bedroom 18

Hall & Landing 18

Kitchen 18

Bathroom 22

Toilet 18

Internal design temperatures from the UK annex to BS EN 12831. CIBSE Guide A should be consulted for data for other

applications.


Wiring CentreMulti-zone wiring centres allow simplified wiring installation within underfloor heating systems. Giving the ability to wire multiple room thermostats and actuators from the manifold. Wiring centres should also include boiler, pump and two-port valve connections. In addition to this our wiring centres also offer hot water & heating circuit connections.

Room ThermostatsRoom thermostats should be used in every room, this is due to a number of factors. Each room could have a different room temperature (see table), each room will have a different heat loss, which if there is only one thermostat on each floor this will not accommodate for this. We offer 230v, 12v and wireless controls.

7

How SOLFEX energy systems can help you

Underfloor heating design assist and C.A.D. ServiceSOLFEX energy systems offer a full indemnified design and CAD service which includes Underfloor heating designs according to BS EN 1264. Professional CAD drawings will also be supplied with every system detailing all circuit information & manifold positions.

Renewable energy systems integrationUnderfloor heating systems are perfectly suited to work with a renewable energy heat source such as a Heat Pump or a Solar Thermal system. Our in house design team can expertly specify & design a perfect system according to your bespoke requirements. Using the latest in design simulation software, we can provide our customers with detailed system drawings & energy yields of the proposed renewable energy system which will integrate with your Underfloor heating system.

Technical knowledge and experienceOur fully trained Underfloor heating technical sales division are available at all stages of the project, offering expert advice and guidance to the highest standards such as:

• Comprehensive designs

• Circuit lengths with correct flow rates and pressure losses

• Detailed Drawings of floor plan layouts and circuits

• Dedicated Underfloor heating technical sales team

• National On-site assistance if required

• Fully indemnified system designs

7

8

1. Online quotation toolThis fast & simple online animated software will provide a bespoke & unique quotation and is available for merchant groups, installers, project developers & homeowners. The software also allows the project file to be saved, and if required edited at a later stage. Upon completion of your quick design, a list price quotation followed by a unique code will be automatically emailed to you. The unique code can then be forwarded to your local merchant group, who will be able to advise a discount off the list price quotation.

Improved user experienceWith the addition of preset options, the quick calculator is now even quicker.

Heat sourceWith the ever increasing desire to incorporate underfloor heating with renewable heat sources, we have now added the option to select your heat source, chose from medium temperature heat pump, high temperature heat pump and boiler.

Heat pump quoteYou can now add a Heat Pump to your quotation, with little additional work needed

Online Services & Quick Quotation Calculator

Next day national delivery on orders received before 2pm*All Underfloor Heating components within the SOLFEX energy systems range are stock items and are available for National UK next day delivery on all orders placed before 2pm.

*on orders received before 2pm. Next day delivery excludes Scottish Highlands, Ireland, Channel Islands & Isle of Man. Systems must be fully designed & drawings signed off prior to the consignment being despatched.

2. Send us your plansEmail or post your plans and we will do all the work for you! A professional list price quotation is then produced which includes detailed manifold circuit information and a breakdown of system components, your local merchant group will then be able to advise the discount available of your bespoke underfloor heating package. We aim to provide you with a detailed written quotation within 24 hours.

3. Component price listFor Merchants & Specialised Contractors who do not require a “System House” packaged solution approach, we offer a comprehensive range of only the highest quality Underfloor heating system components at very competitive price

NEXT DAYNEXT DAY

DELIVERY*

InstantQuote

24 hrQuote

9

Contacts

Design & Technical TeamLee Napier Technical & Product Manager T: 01772 317015 E: [email protected]

Jordan Davies Design & Technical Advisor T: 01772 317010 E: [email protected]

Contact me for;

• Technical information

• Design queries

• On-Site Technical query

• Product information

Head OfficeSOLFEX Ltd Units 3-5 Charnley Fold Industrial Estate Bamber Bridge, Preston Lancashire, PR5 6PS

T: 01772 312 847 F: 01772 335 277 E: [email protected]

Internal Sales TeamJulie Clayton Sales Office Manager T: 01772 317018 E: [email protected]

East England Nicola Hulmston Sales Office Supervisor T: 01772 317004 E: [email protected]

Scotland & Northern England Jake Graham Sales Team Co-ordinator T: 01772 317011 E: [email protected]

South West England & South Wales Tom Kavanagh Sales Team Co-ordinator T: 01772 317017 E: [email protected]

South East England Levi Gibbs Sales Team Co-ordinator T: 01772 317014 E: [email protected]

North Wales & West England T: 01772 317007 E: [email protected]

Contact me for;

• Quotations

• Product information

• To place orders

• Any delivery query

10

Underfloor Heating System Selector

Scre

edFl

oatin

gSu

spen

ded

Elec

tric

Low

Pro

file

WARM-BOARD 15/18mm

Page

20

NEO-FOILPage

28

StaplePage

14

Heat PlatesPage

36

Underwood HeaterPage

55

WARM-BOARD Light 15/18mm

Page

22

Heat PlatesPage

30

Rapid Clip PlatePage

12

NEO-FOILPage

34

Undertile Heating MatPage

54

WARM-BOARD End Support

Page

24

Clip RailPage

16

“Fit from Below” Heat Plates

Page

38

Underfloor Heating CablePage

56

11

StapleFor fixing pipes direct

Clip RailFor fixing pipes direct

Rapid Clip PlateNo fixings or staples

Screed System Constructions

12

Rapid Clip PlateNo fixings or staples

Floor Covering

Screed

16mm PEXLINE / PEX AL PEX pipe

Insulation

Rapid Clip Plate

Concrete

Vapour Control Layer

RAPID Clip Plate is a quick and simple system to install. The main benefit of the system is the ready made pipe spacing and pipe retaining fixings. Pipes can be spaced as little as 50mm apart, with spacings increasing in multiples of 50mm, giving flexibility to the pipe centres of your project.

CPS / TP Code Description Pipe Diameter Part No. Price

225338 Rapid Clip Plate -1450mm x 850mm x 21mm 14 - 17 mm UFH-ACC-PCM £8.82

419407 Rapid Clip Plate -1050mm x 650mm x 16mm 10 - 12 mm UFH-ACC-PCR £5.90

613470 Insulation Strip with Overlap and Tape - 25m x 150mm x 8mm Each UFH-ACC-ESOT £14.11

13

ø16mm

Rapid Clip Plate

Features & benefits using Rapid Clip Plates

• Provides ready-made pipe securing & spacing’s

• Can be used with traditional & liquid screeds

• Suitable for all pipe work layouts

• Good for large regular shaped areas

• Can be installed over alternative surfaces

• Degree of protection from foot traffic whilst screed is being laid

• Typical outputs up to 122 w/m2*

• (WxL) 1450mm x 850mm

SuitabilitySuitable for screed systems when an insulation board is present.

Rapid Clip Plate Installation Guide

1. Start by ensuring the floor is level and free from dirt prior to laying the insulation panels.

2. Apply the blue edge insulation around the perimeter of the room using the self adhesive backing. Make sure the clear gaiter is facing away from the wall.

3. Lay the insulation panels across the whole floor, pushing them up against the edge insulation. Ensure that the clear polythene flap is laid over the top of the insulation panels. (Please note insulation for screed systems is NOT supplied by SOLFEX and must comply with current building regulations)

4. Begin by laying the first plate in one corner with the rounded castellated edges away from the walls.

5. Fix the second mat with the edge castellation slotting onto the rounded castellation along the shortest side. Continue this process staggering the plates down the longest side until the whole floor is covered. Where necessary it is advisable to cut the plates using a hand saw, jig saw or suitable snips.

6. Ensure that the clear gaiter attached to the edge insulation is lifted over the top of the castellation mats and trapped in place using the pipe (as in point 7). If the pipe run is not located along the wall, please ensure that the clear gaiter is taped down in place to prevent the screed from leaking through under the insulation.

7. Now begin to lay the pipe. It is advisable to use a pipe de-coiler (UFH-ACC-PDC) for installations; this will reduce the need for an additional worker to carry the coil. Please ensure to utilise the floor plan pipe layout design provided.

8. Once all the pipes are laid begin filling and pressurizing the system to check for leaks prior to screeding.

Pipework Layout Suitability

Flow Temp

°C

Finished floor covering

Tile Wood Floor Carpet 1.5 Tog

Floor Heat Output w/m2

55/50 122 76 66

50/45 97 61 53

45/40 73 46 40

40/35 48 30 26

*Typical heat outputs based upon BS EN 1264 Pt. (2)

14

StapleFor fixing pipes direct

Floor Covering

Screed


Insulation

Concrete


STAPLES are a quick to install, cost effective system that can be fitted into irregular shaped rooms. This offers more flexibility to the position of the underfloor heating pipe work. SOLFEX staples are suitable for use with 15-20mm pipe and come in 40mm or 50mm sizes.

CPS / TP Code Description Delivery Part No. Price

419410 40mm Staples 300pcs / pk UFH-ACC-STPL-15/19 £9.67



747090 Staple Gun For Use With 50mm Staples Each UFH-ACC-STGN1 £189.00

15

ø16mm

Staple

Features & benefits using Staple installation.

• Cost effective

• Quick & simple installation


• Can be fixed direct to the insulation

• Good for irregular shaped areas

• Can be installed over alternative surfaces



Staple Installation Guide



3. Lay the insulation panels across the whole floor, lining them up against the edge insulation. Ensure the clear polythene flap is laid over the top of the insulation panels and taped in place. (Please note insulation for screed systems is NOT supplied by SOLFEX and must comply with current building regulations)

4. Lay a suitable plastic membrane over the entire floor area and tape all edges and joints to prevent the screed leaking through to the insulation.

5. Now begin laying the pipe. It is advisable to use a pipe de-coiler (UFH-ACC-PDC) for installations; this will reduce the need for an additional worker to carry the coil. SOLFEX staple gun will need to be adjusted to the correct staple size using the Allen key provided to prevent the staple gun from jamming.

6. Begin by laying the pipe along the first run, using a staple at a maximum of every 400mm. When reaching the return bends it is advised to use 3 staples to keep the bend secure.



Flow Temp

°C




55/50 122 76 66

50/45 97 61 53

45/40 73 46 40

40/35 48 30 26


16

Clip RailFor fixing pipes direct

Floor Covering

Screed


Insulation

Concrete


Clip Rail is our mid-range screed fixing solution. The clip rails cater for pipes from 15mm to 20mm providing ready made pipe spacings. The self adhesive tape backing speeds up installation, with little need for tools and provides secure fixing.

CPS / TP Code Description Delivery Part No. Price

419401 1m Clip rail with adhesive for 16-20mm pipe Each UFH-ACC-CR-15/20 £2.42




17

ø16mm

Clip Rail

Features & benefits using Clip Rail installation.

• Provides ready-made pipe spacing’s


• Can be fixed to insulation too thin for staples.


• Can be installed over alternative surfaces.

• Typical outputs up to 122w/m2*


Clip Rail Installation Guide



3. Lay the insulation panels across the whole floor, lining them up against the edge insulation. Ensure the clear polythene flap is laid over the top of the insulation panels and taped in place. (Please note insulation for screed systems is NOT supplied by SOLFEX and must comply with current building regulations)

4. Lay a suitable plastic membrane over the entire floor area and tape all edges and joints to prevent the screed leaking through to the insulation.

5. Make sure the area is clean and free from dirt and dust. Remove the silicone paper strip from the clip rail to expose the adhesive back. Fix the clip rails to the insulation base and fix 3 of the staples provided along the rail to help secure it in place.

6. Continue to lay the clip rails, aligning them with the ones previously fitted.

7. Now begin laying the pipe. It is advisable to use a pipe de-coiler (UFH-ACC-PDC) for installations; this will reduce the need for an additional worker to carry the coil. Please note on the bend returns 3 staples should be used to fix the pipe in to position.


Flow Temp

°C




55/50 122 76 66

50/45 97 61 53

45/40 73 46 40

40/35 48 30 26



18

Photovoltaics?We do that too.

TEL: 01772 312847 FAX: 01772 335277

EMAIL: [email protected] WEB: www.SOLFEX.co.uk

Modules Inverters Battery Storage Mounting Systems

Packaged Solutions

19

WARM-BOARD End SupportMultifunctional end support

WARM-BOARD LightOver Floor ‘LOW PROFILE‘ aluminium foil system

WARM-BOARDOver Floor ‘LOW PROFILE‘ dry screed system

WARM-BOARD Overfloor System Constructions PatentPendingP30561GB1, P30562GB1

WORLDWIDE

20

WARM-BOARDOver Floor ‘LOW PROFILE‘ dry screed system

Patent Pending P30561GB1, P30562GB1

Floor Covering

18mm or 15mm WARM-BOARD


Existing Concrete Floor

12mm or 10mm PEXLINE Pipe

WARM-BOARD utilises a 15mm or an 18mm high density dry screed board which acts as a heat conducting surface transferring the heat from the pipes to the heated floor above. With its low build up height and ease of installation WARM-BOARD is ideal for most underfloor heating scenarios. WARM-BOARD is suitable for all floor coverings.

PatentPendingP30561GB1, P30562GB1

WORLDWIDE

CPS / TP Code Description Dimensions Pipe Centers Part No. Price

419411 15mm Warm-board Panel 800mm x 600mm x 15mm 150mm UFH-ACC-WMB15 £10.53

225344 18mm Warm-board Panel 800mm x 600mm x 18mm 150mm UFH-ACC-WMB18 £12.15

613480 15mm Warm-board - Pallet of 90 800mm x 600mm x 15mm 150mm UFH-ACC-WMB15P £947.76

419413 18mm Warm-board - Pallet of 80 800mm x 600mm x 18mm 150mm UFH-ACC-WMB18P £972.25

419412 15mm End Support 300mm x 320mm x 15mm 150mm UFH-ACC-WMB15R £2.46

419414 18mm End Support 300mm x 320mm x 18mm 150mm UFH-ACC-WMB18R £2.46

225346 Warm-board Jointing Glue 475g Bottle UFH-ACC-WMBG £11.39

21

ø10 or 12mm15 or 18mm

WARM-BOARD

Features & benefits using WARM-BOARD Systems.


• Can be used on top of all level floor constructions ’RETROFIT’ and ‘NEW CONSTRUCTION’


• Quick installation & direct laying of tiles

• Low Profile 15mm and 18mm

• Outputs up to 104.4 w/m2*

• (WxLxD) 800mm x 600mm x 15/18mm

• Independently Tested by BSRIA

SuitabilityA full ‘OVER FLOOR’ solution, for use on both wood and concrete floors.


BSRIA

IndependentlyTested by

WARM-BOARD Installation Guide

1. Start by ensuring the floor is level and free from dirt. Removing all loose debris.

2. Mark all areas that will be underfloor heating free i.e. under kitchen cabinets, toilets, baths and showers.

3. Place 18mm/15mm plywood/MDF boards in the unheated areas to bring the final floor level.

4. Start by laying the first two WARM-BOARD end supports, fixing the supports to the floor with suitable screws using the screw holes provided.

5. Lay the first board, butting the edge up to the end support.

6. Ensure all edges are free from dirt and dust. Apply glue to the edge of the second WARM-BOARD and butt up against the first WARM-BOARD. Use a small cut of pipe to align the WARM-BOARDS.

7. Upon reaching the end of the first run, fix two more end supports at the end of the run. This will leave a final cut of WARM-BOARD to finish the first run. Use a hand saw or jigsaw to cut the boards. Cutting the WARM-BOARD should be done in a well ventilated area with suitable breathing apparatus.

8. When starting the second run stagger the WARM-BOARDS in a brick pattern. Continue in this fashion until the whole area is covered.

9. Once all the boards are installed, lay the pipe from the chosen manifold position, following the floor plan pipe layout design supplied. It is advisable to use a pipe de-coiler (UFH-ACC-PDC) for installations; this will reduce the need for an additional worker to carry the coil.

10. Once all the pipes are laid begin the filling and pressurizing of the system to check for leaks prior to laying the finished floor.

Flow Temp

°C


Tile / 6mm Ply Wood Floor6mm Ply/ Carpet

1.5 Tog


55/50 104.4 77.0 64.1

50/45 87.7 64.7 53.9

45/40 71.1 52.4 43.7

40/35 54.4 40.1 33.4

As verified by BSRIA test No. - 57594/1

Watch our video installation guide online at:

www.solfex.co.uk/underfloorheating

22

WARM-BOARD LightOver Floor ‘LOW PROFILE‘ aluminium foil system


Engineered wood floor covering

18mm or 15mm WARM-BOARD Light

12mm or 10mm PEXLINE pipe


Structural chipboard floor

Optional Insulation

WARM-BOARD light utilises high compressive strength expanded polystyrene, with a highly efficient aluminium foil covering. This acts as a heat conducting surface to transfer the heat from the pipes to the finished floor above. WARM-BOARD Light is available in 15mm or 18mm and is suitable for wood floor coverings fitted directly and carpets with a 6mm MDF or 10mm plywood.


419415 Warm-Board Light Floor Panel 1200mm x 600mm x 15mm 150mm UFH-ACC-WMB-L15 £18.39

613484 Warm-Board Light Floor Panel 1200mm x 600mm x 18mm 150mm UFH-ACC-WMB-L18 £17.76

419412 Warm-Board End Support 300mm x 320mm x 15mm 150mm UFH-ACC-WMB15R £2.46

419414 Warm-Board End Support 300mm x 320mm x 18mm 150mm UFH-ACC-WMB18R £2.46

PatentPendingP30561GB1, P30562GB1

WORLDWIDE

23

ø10 or 12mm15 or 18mm

WARM-BOARD Light

Features & benefits using WARM-BOARD Light Systems.


• Can be used on top of all flooring types


• Quick installation & low profile 15mm & 18mm

• Highly efficient aluminium foil surface with outputs up to 77 w/m2*

• Ideal for direct application of solid and laminate wood floors.

• (WxLxD) 1200mm x 600mm x 15/18mm

• Independently Tested by BSRIA

SuitabilityA full ‘OVER FLOOR’ solution, for use on both suspended and concrete floors.

WARM-BOARD Light Installation Guide


2. Mark all areas that will be underfloor heating free i.e. under kitchen cabinets, toilets, baths and showers.

3. Place 15mm/18mm plywood/MDF boards in the unheated areas to bring the final floor level. This will help with the WARM-BOARD light install

4. Start by laying the first two WARM-BOARD end supports, fixing to the floor using suitable screws with the screw holes provided.

5. Lay the first board, butting the edge up to the end support.

6. Using a small cut of pipe to align the WARM-BOARD Light panels.

7. Upon reaching the end of the first run, fix two more end supports at the end of the run. This will leave a final cut of WARM-BOARD Light to finish the first run. Use a sharp knife to cut the boards.

8. When starting the second run stagger the WARM-BOARDS light panels in a brick pattern. Continue in this fashion until the whole area is covered.

9. Using a foiled tape, seal the long panel joints. NOTE: Once the pipe is installed seal across the top of the pipes where the panels meet.

10. Begin to lay the pipe. It is advisable to use a pipe de-coiler (UFH-ACC-PDC) for installations; this will reduce the need for an additional worker to carry the coil.


BSRIA


Flow Temp °C


Wood Floor 6mm Ply/ Carpet 1.5 Tog


55/50 77 58

50/45 64.7 49

45/40 52.4 40

40/35 40.1 31

As verified by BSRIA test No. - 57594/1


24

WARM-BOARD End SupportMultifunctional solution to over floor heating installations


The WARM-BOARD end support is a multifunctional pipe return, pipe clip and floor support which has multiple snapping points to be able to decrease its size and maximize the heat emitter area.

BSRIA


Watch our video installation guide online at:


25

The WARM-BOARD End Support is a revolutionary, multifunctional underfloor heating pipe and floor support system. The End Support with its multiple snapping points enables a more flexible approach to underfloor heating installation, giving the installer the benefit of installing larger floor areas. With the integral pipe securing system, it allows a trouble free quick installation of the pipe work, ensuring the underfloor pipe work remains fixed in position. The word support has a multiple meaning; the product offers a support to the floor covering above around the perimeter of the room, without the requirement of a biscuit screed; it supports the pipe work once pressed into place

Suitability

A full ‘OVER FLOOR’ solution, for use on both suspended and concrete floors.

Boundary ConditionsThe pipe fixing is placed on hard surface and was constrained in all 6 degrees of freedom. Once it is secured in place a 1500N load was uniformly distributed over the surface of the WARM-BOARD End Support which is equivalent to 150Kg.

Stress Test of WARM-BOARD End SupportA stress analysis was carried out to investigate the suitability of the design for the purpose intended. A 1500N load was applied uniformly on the surface of the underfloor heating pipe fixing. Upon final inspection the end support suffered no cracking or deformation.

Stress due to load applied


Features & benefits using the WARM-BOARD End Support

• Self-Retaining pipe locking system

• Multiple flow and return channels, enabling the installation of larger areas

• Non continuous return allows flexible entry points to the board

• Interlocking panels enabling a secure base.

• Multiple snapping points offering a flexible pipe routing system between rooms.

• Available in thicknesses of 15mm & 18mm

• Dimensions – 320mm x 300mm

• Independently Tested by ADJ designs

IndependentlyStressTested

26

Case Study

Property type Renovation

Location Oakhall Farm

Installer MWG Underfloor Heating

System type WARM-BOARD

Heat source Boiler

Controls SOLFEX NeoStat Smart Controls

Watch this installation take shape at:


As seen in our Video Installation

Guide

27

Floating Heat PlateCombined aluminium heat diffusion plate and grooved insulation board

Floating NEO-FOILCombined foiled heat transfer layer and grooved insulation board

Floating Floor System Constructions

28

Floating NEO-FOILFoiled heat transfer layer & grooved insulation

Floor covering

NEO-Foil aluminium foil surface

30mm pre-grooved insulation


Existing concrete floor

NEO-Foil utilises high compressive strength extruded polystyrene, with a highly efficient aluminium foil covering. This acts as a heat conducting surface to transfer the heat from the pipes to the finished floor above. NEO-Foil is available in 30mm. NEO-foil floating floor is suitable for wood floor coverings fitted directly and carpets with a 10mm plywood.


951524 Neo-Foil Grooved Insulation Panel 1200mm x 600mm x 30mm 200mm UFH-ACC-NEO-FF30 £15.32

29

ø16mm30mm

Floating NEO-FOIL

Features & benefits using NEO-FOIL systems

• Provides ready-made pipe securing & spacing using pre grooved neo-foil insulated boards

• High compressive strength insulation, for the direct application of engineered wood floors

• Offers a combined floating floor and underfloor heating solution


• (WxLxD) 1200mm x 600mm x 30mm

SuitabilityA full floating floor solution, for use on both suspended and concrete floors.

NEO-FOIL Installation Guide


2. Lay your first board, butting the edges up to the wall.

3. Lay the second board, using a small cut of pipe to align the NEO-Foil panels.

4. Upon reaching the end of the first run, you may be required to cut the NEO-Foil panel. It is advised to use a hand saw, with a dust mask in a well ventilated area. Ensure the returns are still present.

5. When starting the second run, you must stagger the NEO-Foil panels in a brick pattern. Continue in this fashion until the whole area is covered.

6. Using a foiled tape, seal the joints that are parallel to the pipe. NOTE: Once the pipe is installed you must seal across the top of the pipes where the panels meet.

7. Begin to lay the pipe. It is advised to use a pipe de-coiler (UFH-ACC-PDC) for installations; this will reduce the need for an additional worker to carry the coil.


Flow Temp °C




55/50 65.0 59.3

50/45 53.1 48.3

45/40 41.8 37.8

40/35 31.2 33.0



30

Floating Heat PlateAluminium heat diffusion plate & grooved insulation

Floor covering

Heat Emission plates

Existing concrete floor

30mm pre-grooved insulation


Heat Plates utilises high compressive strength extruded polystyrene insulation, with highly efficient aluminium Heat Plates. This acts as a heat conducting surface to transfer the heat from the pipes to the finished floor above. Floating Heat Plates are available in 30mm. Floating Heat Plates are suitable for wood floor coverings fitted directly and carpets with a 22mm Chipboard.


225332 Aluminium Spreader Plate 1000mm x 390mm 200mm UFH-ACC-ALSP £6.13

747089 Aluminium Spreader Plate 1000mm x 140mm ≥141mm UPH-ACC-ALSP-S £2.79

951528 Floating Floor Insulation Panel 1200mm x 600mm x 30mm 200mm UFH-ACC-XPS-FF30 £11.79

31

Floating Heat Plates Installation Guide


2. Lay your first board, butting the edges up to the wall.

3. Lay your second insulation panel, using one of the Heat Plates to align the grooves.

4. Upon reaching the end of the first run, you may be required to cut the insulation panel. It is advised to use a hand saw, with a dust mask in a well ventilated area. Ensure the returns are still present.

5. When starting the second run, you must stagger the insulation panels in a brick pattern. Continue in this fashion until the whole area is covered.

6. Begin to insert the Heat Plates starting just below the first return.

7. Once the Heat Plates are laid begin laying the pipe following the floor plan pipe layout provided. It is advised to use a pipe de-coiler (UFH-ACC-PDC) for installations; this will reduce the need for an additional worker to carry the coil. If more channels are needed for pipe, you will require a hot wire polystyrene cutter.


ø16mm30mm

Floating Heat Plate

Features & benefits using Heat Plate systems

• Provides ready-made pipe securing and spacing using pre grooved insulated boards

• Heat Emission Plates available in single or double size format for 16mm pipe

• Can be installed on top of existing floors in new build and retrofit applications

• Typical outputs up to 85.8 w/m2*


SuitabilityA full floating floor solution, for use on both suspended and concrete floors.

Flow Temp °C




55/50 85.8 69.9

50/45 74.2 60.4

45/40 61.4 49.8

40/35 49.8 40.2



32

Heat Pumps?We do that too.

TEL: 01772 312847 FAX: 01772 335277


Heat Pumps Cylinders Preplumbed Components Accessories Packaged

Solutions

33

“Fit from below” Heat PlateAluminium heat diffusion plate

Suspended Heat PlateAluminium heat diffusion plate & grooved insulation

Suspended NEO-FOILFoiled heat transfer layer & grooved insulation

Suspended Floor System Constructions

34

Suspended NEO-FOILFoiled heat transfer layer & grooved insulation

Floor covering

Chipboard

NEO-Foil Aluminium surface


NEO-Foil pre-grooved insulation

NEO-Foil utilises high compressive strength extruded polystyrene, with a highly efficient aluminium foil covering. This acts as a heat conducting surface to transfer the heat from the pipes to the finished floor above. NEO-Foil is available in 30mm.


757455 Neo-Foil Grooved Insulation Panel 1200mm x 350mm x 30mm 200mm UFH-ACC-NEO-SF30 £11.67

35

ø16mm

30mm

Suspended NEO-FOIL

Suspended NEO-FOIL Installation Guide

1. Floor boards will need removing and all nails and imperfections removed from the tops of the joists. NOTE: It is advised at this stage to check the joist centres prior to installation.

2. Batten down either side of all joists ensuring that each batten is level. Battens should be positioned 4mm below the thickness of the system.

3. Place a 6mm plywood panel on top of the battens. The distance from the top of the joist to the plywood should be just smaller than the thickness of the underfloor panels. This will improve contact with the upper floor.

4. Lay the NEO-Foil panels ensuring there is a return at either end of the run. Continue the process until each joist run is filled

5. Lay the underfloor heating pipe as per the floor plan pipe layout design provided. It is advised to use a pipe de-coiler (UFH-ACC-PDC) for installations; this will reduce the need for an additional worker to carry the coil.


Features & benefits using NEO-FOIL systems

• Provides ready-made pipe securing & spacing using pre grooved Neo–Foil heat transfer boards

• Can be installed within battens or timber joists

• Suitable for joist or batten spaces 400mm centres

• Below insulation barrier, ensures heat is transferred to living space

• Typical outputs up to 61.3 w/m2*


SuitabilityA full floating floor solution, for use on both suspended and concrete floors using battens.

Flow Temp °C




55/50 61.3 56.0

50/45 50.1 45.6

45/40 39.5 35.7

40/35 29.5 26.5



36

Suspended Heat PlateAluminium heat diffusion plate & grooved insulation

Floor covering

Structural chipboard floor

Heat Emission Plate


Pre-grooved insulation

Heat Plates utilises high compressive strength extruded polystyrene insulation, with highly efficient aluminium Heat Plates. This acts as a heat conducting surface to transfer the heat from the pipes to the finished floor above. Suspended Heat Plates are available in 30mm.


225332 Aluminium Spreader Plate 1000mm x 390mm 200mm UFH-ACC-ALSP £6.13

177048 Aluminium Spreader Plate 1000mm x 390mm 133mm UFH-ACC-ALSP133 £6.97

951529 Suspended Floor Insulation Panel 1200mm x 350mm x 30mm 200mm UFH-ACC-XPS-SF30 £8.75

37

ø16mm

35 or 50mm

Suspended Heat Plate

Suspended Heat Plates Installation Guide

1. Floor boards will need removing and all nails and imperfections removed from the tops of the joists. NOTE: It is advised at this stage to check the joist centres prior to installation.

2. Batten down either side of all joists ensuring that each batten is level. Battens should be positioned 4mm below the thickness of the system.

3. Place a 6mm plywood panel on top of the battens. The distance from the top of the joist to the plywood should be just smaller than the thickness of the underfloor panels. This will improve contact with the upper floor.

4. Lay the insulation panels ensuring there is a return at either end of the run. Continue the process until each joist run is filled

5. Place the Heat Plates between the joists slotting them into the pre-grooved insulation channels. Tack the Heat Plates at either side.

6. Lay the underfloor heating pipe as per the floor plan pipe layout design provided. It is advised to use a pipe de-coiler (UFH-ACC-PDC) for installations; this will reduce the need for an additional worker to carry the coil.


Features & benefits using Heat Plate systems

• Provides ready-made pipe securing & spacing using pre grooved Heat Emission Plates

• Installs within battens or timber joist floors

• Suitable for joist or batten spaces 400mm centres

• Insulation barrier ensures heat is emitted upwards

• Plates available in single or double size format

• 30mm or supplied by others



SuitabilityA full suspended floor solution, for use on both suspended and concrete floors using battens.

Flow Temp °C




55/50 81 66

50/45 70 57

45/40 58 47

40/35 47 38



38

Fit from below Heat Plates remove the need to lift the floor boards. 100mm wide with single channel grooves FFB Heat Plates offer the same heat outputs as regular Heat Plates.

“Fit from below” Heat PlateAluminium heat diffusion plate

Insulation

Plasterboard Ceiling

“Fit from Below” Heat Emission Plate

Structural Chipboard Floor

16mm PEX AL PEX pipe


757454 Aluminium “J” Spreader Plate 1000mm x 100mm N/A UFH-ACC-ALSP-J £3.44

39

“Fit from below” Heat Plate

“Fit from below” Spreader Plates Installation Guide

1. Drill holes through one end of the joist, enough for the number of pipes needed to feed that room. The SOLFEX pipe layout plan will show the information required for this.

2. Tack the plates to the underside of the floor boards aligning the plates.

3. When returning along the joist run, ensure the pipe centres match the centres on the SOLFEX pipe layout design.

4. Feed the pipe from the manifold to the last joist run and return.

5. Starting from the furthest joist run from the pipe entrance to the room. Pull the pipe down the runs and clip into the plates.

6. Continue from step 2 until the circuit run is complete.

7. Once all the pipes are fitted begin the filling and pressurizing of the system to check for leaks. A minimum 6bar pressure test must be carried out.

Features & benefits using “Fit from below” Spreader Plate systems

• Installs within timber joists

• Suitable for multiple centre joist spacing’s

• Insulation barrier ensures heat is emitted upwards

• Plates available in single format

• Typical output up to 81W/m2

• (WxL) 1000mm x 100mm for 16mm pipe

SuitabilityA full suspended floor solution, for use on suspended floors.


ø16mm

Flow Temp

°C




55/50 81 66

50/45 70 57

45/40 58 47

40/35 47 38


40

PEXLINE 5 layerSOLFEX energy systems PEXLINE Underfloor heating pipe is an ultra-high quality, safe & reliable European manufactured product with the longest possible warranty conditions and with a service life of 50 years, using the latest manufacturing techniques and industry know how the pipe work is constructed using FIVE layers in total; cross linked polyethylene, adhesive, EVOH gas-diffusion oxygen barrier, adhesive, cross linked polyethylene.

The layers of adhesive bind the two layers of cross linked polyethylene to the central oxygen barrier layer by a thermal reaction; the oxygen barrier layer is right in the centre of the pipe wall which prevents it being damaged from foot traffic during installation.

Feature and benefits of PEXLINE range of Underfloor heating pipe

• PEXLINE pipe manufactured according to EN ISO 15875

• EVOH layer oxygen barrier in accordance with DIN 4726

• Operational range - 90°C max @ 6 bar, constant temperature 70°C, max peak 100°C.

• Easy to handle, lightweight & flexible allowing easy bending &

• Curving into the tightest of spaces and insulation boards

• Highly durable and robust under harsh installation conditions – EVOH oxygen barrier protected in central core

• Pipe markings every meter displaying number of linear meters from beginning of roll aiding installation, other relevant technical information also indicated every linear meter

• 50 year service life - 10 year insurance backed warranty

• Sizes available Ø – 10 x 1.3, 12 x 2, 16 x 2mm

Pipe Options

CPS / TP Code Pipe Dimensions Coil Size Part No. Price Price per m

225370 PEXLINE 5 LAYER PIPE 10mm x 1.3mm 60m UFH-PIPE-MP10/060 £46.43 £0.77










Crosslinked Polyethlene

Crosslinked Polyethylene

Adhesive Layer

Adhesive Layer

EVOH Oxygen Barrier

41

Pipe Options

PEX AL PEX Multi-layerSOLFEX energy systems PEX AL PEX Multi-Layer Underfloor Heating Pipe is an ultra-high quality, safe & reliable European manufactured product with the longest possible warranty conditions and with a service life of 50 years, using the latest manufacturing techniques and industry know how the pipe work is constructed using FIVE layers in total; cross linked polyethylene inner, adhesive, a central core of aluminium alloy which also acts has an oxygen barrier, another layer of adhesive is then added before another layer of cross linked polyethylene.

The layers of adhesive bind the two layers of cross linked polyethylene to the central core of aluminium alloy oxygen barrier layer by a thermal reaction; the oxygen barrier layer is right in the centre of the pipe wall which prevents it being damaged from foot traffic during installation.

Feature and benefits of PEX AL PEX – Multi-layer Underfloor heating pipe

• PEX-AL-PEX – Multi-Layer pipe manufactured according to EN ISO 15875

• EVOH layer oxygen barrier in accordance with DIN 4726

• Operational range - 95°C max @ 10 bar, constant temperature 70°C, max peak 100°C.

• Easy to handle, lightweight & malleable allowing bending & curving, once pipe is bent it maintains curvature simplifying installation, bending stability according to UNI 10954 standard.

• Robust under harsh installation conditions – Central core aluminium alloy oxygen barrier protected by adhesive layer and PEX cross-linked polyethylene outer core.

• Enhanced heat conductivity output due to aluminium core.

• Minimal linear and cross sectional thermal expansion.

• Pipe markings every meter displaying number of linear meters from beginning of roll aiding installation, other relevant technical information also indicated every linear meter.

• 50 year service life - 10 year insurance backed warranty.

• Sizes available Ø -16 x 2 & 20 x 2 mm

CPS / TP Code Pipe Dimensions Coil Size Part No. Price Price per m

225384 PEX AL PEX MULTI-LAYER PIPE 16mm x 2.0mm 75m UFH-PIPE-PAP16/75 £76.03 £1.01








Crosslinked Polyethlene

Crosslinked Polyethylene

Adhesive Layer

Adhesive Layer

Aluminium

42

Pipe Options

Pipe Fittings & AccessoriesCPS / TP Code Description Part No. Price

Euroconus Fitting Packs

419432 Brass Euroconus Fitting Pack 10mm UFH-MAN-CF10 £1.80





225369 12mm Euroconus Fitting Pack x 1/2” Male Iron UFH-MAN-SRCF12 £2.56

613507 16mm Euroconus Fitting Pack x 1/2” Male Iron UFH-MAN-SRCF16 £2.38

Pipe Leading Bends to Manifold

225339 Pipe leading bend to manifold - 10-12mm pipe UFH-ACC-PLB-12/14 £0.79

419408 Pipe leading bend to manifold - 14-18mm pipe UFH-ACC-PLB-14/18 £0.87

Compression Fittings

613477 Puncture Repair Kit 10mm UFH-ACC-PRCF-10 £5.80




177047 16mm x 16mm Euroconus Straight Fitting UFH-ACC-1600012 £6.00

941035 16mm Euroconus x 15mm Compression Adapter UFH-ACC-1600145 £4.89

941036 Euroconus Male x Euroconus Male Elbow UFH-ACC-500098 £5.00

746968 Euroconus Male x Euroconus Male Fitting UFH-ACC-500378 £5.00

Press Fittings

957073 Press Fitting Straight 16 x 2.0mm UFH-PRESS-COUP16 £2.46

582062 Press Fitting Straight 20 x 2.0mm UFH-PRESS-COUP20 £3.32

957075 Press Fitting Reducer 20 x 2.0mm x 16 x 2.0mm UFH-PRESS-RED20-16 £3.32

957076 Press Fitting Straight Male 1/2" x 16 x 2.0mm UFH-PRESS-M1/2X16 £2.60

957078 Press Fitting Straight Male 3/4" x 20 x 2.0mm UFH-PRESS-M3/4X20 £3.60

957079 Press Fitting Straight Female 1/2" x 16 x 2.0mm UFH-PRESS-F1/2X16 £2.74

582064 Press Fitting Straight Female 3/4" x 20 x 2.0mm UFH-PRESS-F3/4X20 £3.60

957081 Press Fitting Tee 16 x 2.0mm UFH-PRESS-TEE16 £4.47

582065 Press Fitting Tee 20 x 2.0mm UFH-PRESS-TEE20 £6.19

582068 Press Fitting Tee 20 x 2.0 x 20 x 2.0 x 16 x 2.0mm UFH-PRESS-TEE202016 £6.19

957084 Press Fitting Elbow 16 x 2.0mm UFH-PRESS-ELB16 £3.32

582063 Press Fitting Elbow 20 x 2.0mm UFH-PRESS-ELB20 £4.47

Tools

613476 Pipe De-coiler UFH-ACC-PDC £208.69

957086 Manual press tool UFH-PRESS-TOOL £237.60

957087 16 x 2.0mm press jaws UFH-PRESS-JAWS16 £191.70

763018 20 x 2.0mm press jaws UFH-PRESS-JAWS20 £191.70

747090 Staple Gun For Use With 50mm Staples UFH-ACC-STGN1 £189.00

43

Grundfos UPM3 Auto

Isolation Valve

Flow Meter Air Vent

Drain ValveActuator

Manifold and Mixer Packs

SOLFEX manifoldThe SOLFEX Underfloor heating manifolds are part pre-assembled and “ready for installation” with all the necessary components to aid a swift and hassle free installation. The manifold distributes the primary warm heating water from your boiler, heat pump, buffer tank or thermal store evenly into each underfloor heating circuit, if there is a demand for heat within that relevant zone. The SOLFEX Underfloor heating manifolds are available from 2-12 ports and are manufactured from high grade 304 stainless steel, installation and commissioning couldn’t be any simpler, isolation valves are provided on both flow and return and each individual circuit can also be isolated without disruption to the balancing setting, the manifold also incorporates a wall mounting bracket, in-built air bleeding vents and drain off valves.

SOLFEX energy systems dedicated UFH technical & sales division can provide detailed manifold specifications according to bespoke design requirements.

Features and benefits of the SOLFEX Underfloor heating manifold

• High Quality produced product manufactured to BS EN 1264-4

• Pre-assembled and “ready for installation” with all necessary components inbuilt.

• Available in various sizes for any design type or specification.

• Main body produced from high grade 304 stainless steel.

• Patented pipe connections for various pipe types and sizes.

• No scheduled maintenance.

Thermostatic Mixer Valve

CPS / TP Code Description Dimensions Weight Part No. Price

613496 2 Circuit manifold kit 342mm x 276mm x 90mm 4.11 Kg UFH-MAN-02CT £99.46











44

SOLFEX 230v Actuator With their sophisticated engineering, first-rate reliability and high-quality design, The SOLFEX actuator boasts an impressive low energy consumption of just 1 watt. The normally closed actuator has a 4mm stroke and is suitable for use with all our manifolds and wiring centres

SOLFEX Manifold Control KitThe SOLFEX Underfloor heating control pack provides safe temperature controlled mixed water to an Underfloor heating system with a heat output up to 14KW. Designed to be lightweight and compact, in order to connect directly onto a standard manifold, without the need for extra brackets or supports. The Control Pack consists of a temperature mixing valve; an A rated high efficiency Grundfos circulator, return elbow, manifold adapters and all necessary seals. SOLFEX energy systems dedicated Underfloor Heating technical & sales division can provide detailed specifications according to bespoke design requirements.

Feature and benefits of SOLFEX underfloor heating control pack

• High Quality produced product manufactured to BS EN 1264-4, Nickel plated to match stainless steel manifold

• Compact bolt on unit providing quick and simple installation

• For Space heating applications up to 14KW

• Easy set up within the adjustable range of 25°C to 60°C

• Controls flow temperature to +/- 2°C even with changing boiler flow and return temperatures

• A rated high efficiency circulator as standard for lower energy use and running cost

• Flow and return connections can be adjusted to enter from horizontal or vertical

• No scheduled maintenance


CPS / TP Code Description Dimensions Part No. Price

225366 Mixer Pack with “A” Rated Pump 250mm x 155mm x 155mm UFH-MAN-MIX £308.57

613501 230V Manifold Electronic Actuator UFH-MAN-ACTU £16.05

941178 Actuator Replacement Adapter UFH-MAN-ACTU-VA90 £1.14

45

SOLFEX single room control & mixing packThe SOLFEX single room underfloor heating control pack provides safe temperature controlled mixed water to an underfloor heating system with a heat output up to 3KW, a perfect solution for retro fitting underfloor heating into an additional room or conservatory.

Designed to be lightweight and compact in order to connect directly onto pipe work without the need for extra brackets or supports. The Control Pack consists of a temperature mixing valve; an A rated high efficiency Grundfos circulator, isolation valves, flow and return connections and fixing kit. SOLFEX energy systems dedicated Underfloor Heating technical & Sales division can provide detailed specifications according to bespoke design requirements. Single room mixer packs require a dedicated flow and return.

Features and benefits of SOLFEX single room Underfloor heating control pack

• High Quality produced product manufactured to BS EN 1264-4

• Compact bolt on unit providing quick and simple installation.

• For space heating applications up to 3KW.

• Easy set up within the adjustable range of 35°C to 65°C.

• Controls flow temperature to +/-2°C even with changing boiler flow and return temperatures.

• A rated high efficiency circulator as standard for lower energy use and running cost.

• No scheduled maintenance.


613504 Single Room Mixer Pack 305mm x 175mm x 225mm UFH-MAN-SR £385.72

Manifold Accessories

CPS / TP Code Description Part No. Price

419434 Set of Two Bends for Manifold UFH-MAN-ELB £46.33

117072 Manifold Drain / Filling Valves, Red & Blue Pair UFH-MAN-FILL450001 £18.78

117074 Temperature Gauge for Mixing Kit UFH-MAN-GAGE600005 £13.23

177075 Manifold Extension Kit UFH-MAN-MEXT450001 £59.40

941181 Manifold Pressure Gauge UFH-MAN-SKIT40012 £7.83

177077 Manifold Blanking Cap UFH-MAN-SKIT450009 £3.78

747113 Manifold Circuit Isolating Valve UFH-MAN-SKIT450008 £5.94

941182 Manifold Ball Valve - Red UFH-MAN-SP450001 £8.64

747114 Manifold Ball Valve - Blue UFH-MAN-SP450002 £8.64

747115 Manifold Bleed Valve Including Key UFH-MAN-SP450003 £0.54

747116 Manifold Drain / Filling Valve - Red UFH-MAN-SP450004 £4.05

747117 Manifold Drain / Filling Valve - Blue UFH-MAN-SP450005 £4.05

747118 Manifold Flow Meter UFH-MAN-SP450007 £5.94


46

Solar Thermal?We do that too.

TEL: 01772 312847 FAX: 01772 335277


Flat Plate Collectors

Vacuum Tube Collectors Storage Tanks Accessories Packaged

Solutions

47

SOLFEX NEO

NEO Multi-zone ControlThe NEO system is designed to provide reliable communication of the thermostat data whilst at the same time providing an extended communication range. Each NEO thermostat acts as a repeater on the NEO system network, helping eliminate range issues.

NEO HUB The NEO HUB connects directly to a spare port on your router, obtaining an IP address and joining itself to your home network. It has been designed to be simple to install and setup, and is compatible with broadband connections with dynamic IP addresses. The NEO HUB connects to our cloud server eliminating any complex setup requirements including port forwarding.

SOLFEX NEO AppFrom the moment you download and install the NEO app on your mobile device you will be surprised how easy it is to have access to your multi-zone heating system from your smart phone. During the installation, you are prompted to enter the program mode and temperature format you require for the system. These settings are applied to all thermostats on the system reducing the overall setup time. 24 hour mode, 5/2day or 7 day program modes can be selected.

Controls

Underfloor heating controlsAt SOLFEX Energy Systems, we provide a wide variety of controls to fit every scenario, whether it is wired, wireless or networked. We will advise you at every stage of the project and deliver a control solution to fit every application.

Easy to install wiring centresThe SOLFEX Energy Systems central wiring switch box, has been designed to be used with wired, wireless and networked thermostats.

The Wiring Centre offers the following functionality;

• Central wiring for up to 8 zones

• Output for underfloor heating valve and pump, activated when any thermostats calls for heat

• Output for a single radiator zone

• Output for domestic hot water

• Three options available; Network, Wireless and Wired.

Stylish room thermostatsSOLFEX Energy Systems offer a wide range of thermostats including electronic dial type, button, touch-screen and the new SOLFEX Neo thermostats. The majority of our room thermostats are designed to be flush mounted, resulting in a slim profile on the wall after installation. We offer a variety of options from wired and wireless to fully networked systems, with the option to control via our central control pad.

Our Touch-screen thermostat models are proving highly popular because of their ease of use and our NEW SOLFEX Neo option is the preferred choice for those looking to control their heating system from their Smart Phone.

Electric Underfloor Heating Compatible

48

Controls

230v Controls

NeoStat Programmable Smart ThermostatThe NeoStat is a 230v powered thermostat with a volt free switch. The NeoStat communicates to the NeoHub and other NeoStats within your home, to create a fully controllable network system of your home heating.

NeoStat has been designed to replace an existing three wire thermostat, and after joining the zone to the NeoHub, remote control is possible.

Slimline ThermostatThe SOLFEX Slimline is our 230v programmable room stat and programmer in one, providing up to 4 different temperatures at different times of the day. The Slimline Thermostat offers remote air sensor facility (Remote Sensor Optional).

DS-SB Room Thermostat with Set Back FunctionThe SOLFEX DS-SB is our flush mount set back thermostat ideal for those wanting a simple but energy efficient control system. The DS-SB thermostat has been designed to work in conjunction with our UH8 wiring centre and TM4 Programmer, but could equally be used as a standalone dial thermostat.

UH8 - 230v Wiring CentreUp to 8 zones can be controlled from the UH8. On board the UH8 are two heating time channels, each zone allows you to specify which time channel it should follow. 2 additional time channel connections are provided for hot water control or other auxiliary devices. On demand from any zone, a 230v output is provided to switch the relevant zone actuator, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers.

UH4 - 230v Wiring CentreThe SOLFEX UH4 can be used in conjunction with our mains thermostats. The UH4 is also ideally suited for underfloor heating. When used for under-floor heating an option is available to use zone 4 for conventional radiator control.

The UH4 provides central switching of up to 4 zone actuators and an output for a hot water cylinder and the system boiler and pump.

CPS / TP Code Description For use with Part No. Price

370047 NeoStat Glacier White UH4 / UH8 UFH-SOL-NEO-GW £86.25

175900 NeoStat Black Edition UH4 / UH8 UFH-SOL-NEO-BK £86.25

370048 NeoHub Neo Thermostats UFH-SOL-NEOHUB £162.50

419416 Set Back Dial Thermostat UH4 / UH8 UFH-SOL-DS-SB £49.64

419425 230V Touchscreen 4 Zone Time Clock UH4 / UH8 UFH-SOL-TM4-TS £90.61

757464 Slimline Digital Programmable Room Thermostat UH4 / UH8 UFH-SOL-SLIM £66.71

369596 UH4 4 Zone Base Level Control Unit 230v Thermostats UFH-SOL-UH4 £76.13

369595 UH8 8 Zone Base Level Control Unit 230v Thermostats UFH-SOL-UH8 £93.37

49

Wireless Controls

NeoAir Wireless Programmable Smart ThermostatThe SOLFEX NeoAir is powered by 4 AAA batteries and provides a totally wire free solution. The NeoAir communicates with the UH8-RF and RF Switch Receivers and can be paired to the NeoHub to provide App Control. The NeoAir communicates directly with the NeoHub and so the NeoPlug or Boost can be used to extend the communication distance.

SLIMLINE-RF Programmable Wireless ThermostatThe SOLFEX Slimline-RF works with the UH8-RF 8 Zone Wireless Wiring Centre and the SOLFEX RF Switch Wireless receiver. The Slimline-RF can be setup to work in non-programmable, programmable or programmable with hot water output mode. The wireless thermostat is designed to be wall mounted in the area being controlled, up to 100 meters open space from the receiver.

UH8-RF - Wireless Wiring Centre

The SOLFEX UH8-RF is our 8 Zone wireless wiring centre designed to work with our Slimline-RF and Neo-air wireless thermostats.

The UH8-RF provides central switching and is therefore ideally situated next to the underfloor heating manifold. 8 zones can be controlled as well as providing an output for a hot water cylinder. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. A wireless link to the boiler is possible when paired with the RF Switch (Sold separately)

RF SWITCH Two Zone Wireless ReceiverThe RF Switch is our surface mount 2 channel wireless thermostat receiver. It is compatible with the Slimline RF and Touch RF Wireless Thermostats. The receiver provides outputs for 1 heating channel and 1 hot water channel

Controls


564216 Neoair Glacier White UH8-RF / RF-Switch UFH-SOL-NEOAIR-GW £86.25

952356 Neoair Black Edition UH8-RF / RF-Switch UFH-SOL-NEOAIR-BK £86.25


175337 Slimline RF Programmable Room Thermostat UH8-RF / RF-Switch UFH-SOL-SLIM-RF £70.62

369597 UH8-RF 8 Zone Wiring Centre Wireless Thermostats UFH-SOL-UH8-RF £158.75

951532 RF Switch Wireless Thermostats UFH-SOL-RF-SWITCH £54.32

50

Network Controls

12V NeoStatThe NeoStat is a 12v powered thermostat with a volt free switch. The NeoStat communicates to the NeoHub and other NeoStats within your home, to create a fully controllable network system of your home heating. Our 12v NeoStat is compatible with the UH1 Wiring centre.

SLIMLINE-N The SLIMLINE-N have been designed to work as part of a network system and can be used in conjunction with our UH1 wiring centre and network products. With modern appearance, the SLIMLINE-N series is wall mounting, resulting in only 13mm once installed. Functions include holiday mode, temperature override, remote controls, temperature hold facility and energy saving optimum start. Energy saving optimum start calculates the amount of heat up time required to ensure your home is warm when you wake and return home. This is automatically optimised throughout the year to save you money.

UH1 Network Wiring centre The UH1 allows the connection of up to eight 12v network thermostats. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. Designed to be used in conjunction with our slimline or touch-screen 12v network thermostats. The UH1 also takes control of the hot water. A cylinder thermostat connection and a 230v hot water valve output are provided. The UH1 is also compatible with the central touchpad making controlling your heating even easier.

Controls


758064 NeoStat 12V Glacier White UH1 UFH-SOL-NEO12V-GW £86.25

563890 NeoStat 12V Black Edition UH1 UFH-SOL-NEO12V-BK £86.25


951534 Slimline-N Thermostat (Network Enabled) UH1 UFH-SOL-SLIM-N £69.00

225357 UH1 8 Zone Wiring Centre 12v Thermostats UFH-SOL-UH1 £160.03

51

Controls

Controls AccessoriesCPS / TP Code Description Part No. Price

Controls Accessories

613486 Remote Sensor Probe UFH-CON-MISC103 £8.04

419417 Remote Sensor Probe Housing UFH-CON-EN030 £8.04

757462 Boost Repeater UFH-CON-BOOST £62.49

747107 Remote Control UFH-CON-RM1 £17.25

Motorised Valves

613505 22mm 2 Port Compression Motorised Valve VAL-60524600 £56.92

762259 28mm 2 Port Compression Motorised Valve VAL-60424600 £44.54

Electric Underfloor Heating ControlsCPS / TP Code Description Part No. Price

Electric Underfloor Heating Controls

747096 SOLFEX NeoStat-e Glacier White UFH-SOL-NEO-E-GW £92.49

957088 SOLFEX NeoStat-e Black Edition UFH-SOL-NEO-E-BK £92.49

370048 NeoHub UFH-CON-NEOHUB £162.50

No More PlyCPS / TP Code Description Dimensions Part No. Price

757460 No More Ply Board 1200mm x 600mm x 6mm UFH-ACC-NMP £11.88

757461 No More Ply Solid Bed Adhesive 17kg Coverage: 15 - 17m2 UFH-ACC-NMPG £162.00

52

LED Lighting?We do that too.

TEL: 01772 312847 FAX: 01772 335277


Commercial Industrial Outdoor Emergency Lamps & Tubes

53

Undertile Heating MatTough fibreglass mesh with an advanced heating cable for under tile, stone or marble applications.

Underwood HeaterDual core advanced heating cables encapsulated between two layers of aluminium foil offering an even heat output for engineered wood or laminate flooring applications

Underfloor Heating CableAn advanced, ultra-thin, heating cable designed for use under tiled floors.

Electric Underfloor Heating Systems

54

Undertile Heating MatThe SOLFEX electric underfloor heating mat is specifically designed for use under tiled floors. The electrical heating cable is attached to a tough fiberglass mesh in a series of loops to fit rooms from 1.0m2.

Installation as quick and easy as the fiberglass mesh can be cut and turned to fit the room. The ultra-thin wire (3mm) is installed by rolling out the mat before tiling and is secured to the sub-floor using the double-sided tape.

The mat will then have to be connected to a programmable room thermostat.

Features & benefits

• Quick installation - Simply roll out the mat with pre-spaced wire and cut & turn the fiberglass mesh to fit the room

• Sturdy fiberglass mesh for extra durability and double-sided tape for secure installation

• Lifetime Warranty

CPS / TP CodeHeating

Area (m2)Mat Size

(m)Spacing (mm)

Resistance (Ω)

Watts Amps Part No. Price

762915 1 0.5x2.0 80 352.7 150 0.7 UFH-ELEC-MAT-01.0 £31.11

762916 1.5 0.5x3.0 80 235.1 225 1 UFH-ELEC-MAT-01.5 £41.50

956986 2 0.5x4.0 80 176.3 300 1.3 UFH-ELEC-MAT-02.0 £50.79

177052 2.5 0.5x5.0 80 141.1 375 1.6 UFH-ELEC-MAT-02.5 £55.78

762924 3 0.5x6.0 80 117.6 450 2 UFH-ELEC-MAT-03.0 £63.62

177053 3.5 0.5x7.0 80 100.8 525 2.3 UFH-ELEC-MAT-03.5 £68.44

762927 4 0.5x8.0 80 88.2 600 2.6 UFH-ELEC-MAT-04.0 £78.65

762929 5 0.5x10.0 80 70.5 750 3.3 UFH-ELEC-MAT-05.0 £97.58

956998 6 0.5x12.0 80 58.8 900 3.9 UFH-ELEC-MAT-06.0 £106.45

762930 7 0.5x14.0 80 50.4 1050 4.6 UFH-ELEC-MAT-07.0 £118.26

762931 8 0.5x16.0 80 44.1 1200 5.2 UFH-ELEC-MAT-08.0 £130.34

762932 9 0.5x18.0 80 39.2 1350 5.9 UFH-ELEC-MAT-09.0 £142.90

957001 10 0.5x20.0 80 35.3 1500 6.5 UFH-ELEC-MAT-10.0 £153.93

177054 12 0.5x22.0 80 29.4 1800 7.8 UFH-ELEC-MAT-12.0 £179.50

177055 Electric Heating Cable Repair Kit UFH-ELEC-REPAIR £11.60


55

Underwood HeaterThe SOLFEX Underwood Heater is a streamlined electric radiant floor heating system designed for use with laminate, engineered wood and other floating floors.

It can be conveniently installed under the floor finish in both dry and wet areas without the need for additional earth grids.

The system uses a dual core fluoropolymer insulated heating cables encapsulated between two layers of aluminium foil. The heating element is spaced uniformly at 50mm spacings. This along with the aluminium foil helps provide even heat distribution.

Features & benefits using Underwood Heater systems

• Installed directly underfloor finish; no self-levelling required

• Fully earthed flat aluminium foil won’t raise floor levels

• Wire based system can be adapted to fit around objects

• Great for heating under floating floors such as laminate and hardwood

• Lifetime warranty

CPS / TP CodeHeating

Area (m2)Mat Size

(m)Spacing (mm)

Resistance (Ω)

Watts Amps Part No. Price

957004 1 0.5x2.0 50 377.9 140 0.61 UFH-ELEC-FOIL-01.0 £40.49

762935 1.5 0.5x3.0 50 252 210 0.91 UFH-ELEC-FOIL-01.5 £47.99

762941 2 0.5x4.0 50 189 280 1.22 UFH-ELEC-FOIL-02.0 £53.64

762945 2.5 0.5x5.0 50 151 350 1.52 UFH-ELEC-FOIL-02.5 £60.70

957017 3 0.5x6.0 50 126 420 1.83 UFH-ELEC-FOIL-03.0 £68.23

957018 3.5 0.5x7.0 50 108 490 2.13 UFH-ELEC-FOIL-03.5 £75.85

762949 4 0.5x8.0 50 95 560 2.43 UFH-ELEC-FOIL-04.0 £82.43

762952 5 0.5x10.0 50 76 700 3.04 UFH-ELEC-FOIL-05.0 £94.72

762957 6 0.5x12.0 50 63 840 3.65 UFH-ELEC-FOIL-06.0 £114.59

957027 7 0.5x14.0 50 54 980 4.26 UFH-ELEC-FOIL-07.0 £132.23

762958 8 0.5x16.0 50 47 1120 4.87 UFH-ELEC-FOIL-08.0 £145.85

957032 9 0.5x18.0 50 42 1260 5.48 UFH-ELEC-FOIL-09.0 £161.70

762964 10 0.5x20.0 50 38 1400 6.09 UFH-ELEC-FOIL-10.0 £178.02

762965 11 0.5x22.0 50 1540 UFH-ELEC-FOIL-11.0 £296.06

762966 12 0.5x24.0 50 31.5 1680 7.3 UFH-ELEC-FOIL-12.0 £196.65



56

Underfloor Heating CableThe SOLFEX electric underfloor heating cable is an advanced, ultra-thin heating cable designed for use under tiled floors.

Installation is quick and easy as the cable is simply reeled out into the desired layout and secured to the sub-floor using tape. The cable will then have to be connected to a programmable room thermostat.

Features & benefits

• Quick & Simple installation

• Durable, flexible cable

• Lifetime Warranty

CPS / TP Code Length (m) Resistance (Ω) Watts Amps Part No. Price

177056 12.5 352.7 150 0.7 UFH-ELEC-ROLL-0150 £29.33

177057 18.8 235.1 225 1 UFH-ELEC-ROLL-0225 £35.01

177058 25 176.3 300 1.3 UFH-ELEC-ROLL-0300 £39.93

177059 31.3 141.1 375 1.6 UFH-ELEC-ROLL-0375 £42.78

177060 37.5 117.6 450 2 UFH-ELEC-ROLL-0450 £47.41

177061 43.8 100.8 525 2.3 UFH-ELEC-ROLL-0525 £51.78

177062 50 88.2 600 2.6 UFH-ELEC-ROLL-0600 £57.41

177063 56.3 78.4 675 2.9 UFH-ELEC-ROLL-0675 £62.81

177066 62.5 70.5 750 3.3 UFH-ELEC-ROLL-0750 £63.54

177067 75 58.8 900 3.9 UFH-ELEC-ROLL-0900 £73.66

177068 87.5 50.4 1050 4.6 UFH-ELEC-ROLL-1050 £87.33


Electric Underfloor Heating Insulation


957036 Cement coated insulation 6mm 1200 x 600mm UFH-ELEC-CMB-6 £13.18

957037 Cement coated insulation 10mm 1200 x 600mm UFH-ELEC-CMB-10 £13.65

957090 Foil underlay for SOLFEX Underwood Heater 2000 x 500mm UFH-ELEC-UNDERLAY £10.71 per m2

177069 Insulation 6mm 1200 x 600mm UFH-ELEC-XPS-06 £2.97

177071 Insulation 10mm 1200 x 600mm UFH-ELEC-XPS-10 £4.62


57

RapidSet


177049 RapidSet Self Leveling Compound UFH-ACC-SFL001 £22.29

177050 Primer - 1 Litre UFH-ACC-SFLP1 £7.71

177051 Primer - 5 Litres UFH-ACC-SFLP5 £27.14

RapidSet Self Levelling CompoundRapidSet is a fibre reinforced, flexible, self levelling floor compound designed for smoothing and levelling subfloors prior to the installation of floor coverings.

It can be applied from depths of 2mm - 50mm in one application making it ideal for all common substrates including underfloor heating systems. As the name suggests, RapidSet dries quickly, allowing for ceramic, porcelain and natural stone tiles to be applied after 3 hours and impervious floor finishes such as decorative vinyl after 24 hours.

RapidSet is protein free and when mixed with water produces a free flowing, shrinkage compensated self levelling floor compound.

Advantages of RapidSet Self Levelling Compound

• Fibre reinforced and flexible

• Ideal for underfloor heating systems

• Apply to plywood, chipboard and timber boards. * Minimum depth on timber is 4mm

• Apply from 2mm – 50mm in one application

• Rapid setting, tile after 3 hours

• Shrinkage compensated

• Protein free

• High durability

• Pumpable

58

EV Charging?We do that too.

TEL: 01772 312847 FAX: 01772 335277


Residential Chargers

Commercial Chargers Accessories

59

Room Packs

WARM-BOARD Light Room PacksThese systems are based on 200mm pipe centres with a 0m connection length. For the full list of materials contained in these packs please contact the underfloor heating team.

WARM-BOARD Room PacksThese systems are based on 200mm pipe centres with a 0m connection length. For the full list of materials contained in these packs please contact the underfloor heating team.

Pack Size

15mm WARM-BOARD with 10mm PEXLINE Pipe 18mm WARM-BOARD with 12mm PEXLINE Pipe

Wired Controller Wireless Controller Wired Controller Wireless Controller

Slimline NeoStat Slimline-RF NeoAir Slimline NeoStat Slimline-RF NeoAir

6m² £760.08 £779.62 £818.31 £833.94 £769.22 £788.76 £827.45 £843.08

9m² £853.01 £872.55 £911.24 £926.87 £868.27 £887.81 £926.50 £942.13

12m² £957.24 £976.78 £1,015.47 £1,031.10 £967.32 £986.86 £1,025.55 £1,041.18

18m² £1,146.43 £1,165.97 £1,204.66 £1,220.29 £1,223.74 £1,243.28 £1,281.97 £1,297.60

24m² £1,386.49 £1,406.03 £1,444.72 £1,460.35 £1,447.02 £1,466.56 £1,505.25 £1,520.88

30m² £1,593.18 £1,612.72 £1,651.41 £1,667.04 £1,715.85 £1,735.39 £1,774.08 £1,789.71

36m² £1,761.31 £1,780.85 £1,819.54 £1,835.17 £1,911.50 £1,931.04 £1,969.73 £1,985.36

42m² £2,007.82 £2,027.36 £2,066.05 £2,081.68 £2,168.32 £2,187.86 £2,226.55 £2,242.18

Pack Size

15mm WARM-BOARD with 10mm PEXLINE Pipe 18mm WARM-BOARD with 12mm PEXLINE Pipe



6m² £791.84 £811.38 £850.07 £865.07 £765.40 £784.94 £823.63 £839.26

9m² £879.64 £897.18 £935.87 £951.50 £851.20 £870.74 £909.43 £925.06

12m² £981.94 £1,001.48 £1,040.17 £1,055.80 £937.00 £956.54 £995.23 £1,010.86

18m² £1,153.54 £1,173.08 £1,211.77 £1,227.40 £1,164.46 £1,184.00 £1,222.69 £1,238.32

24m² £1,411.46 £1,431.00 £1,469.69 £1,485.32 £1,383.92 £1,403.46 £1,442.15 £1,457.78

30m² £1,636.38 £1,655.92 £1,694.61 £1,710.24 £1,637.64 £1,657.18 £1,695.87 £1,711.50

36m² £1,807.98 £1,827.52 £1,866.21 £1,881.84 £1,809.25 £1,828.79 £1,867.48 £1,883.11

42m² £2,065.19 £2,084.73 £2,133.42 £2,139.05 £2,079.39 £2,098.93 £2,137.62 £2,153.25

60

Room Packs

Staple Room PacksThese systems are based on 200mm pipe centres with a 0m connection length. For the full list of materials contained in these packs please contact the underfloor heating team.

Clip Rail Room PacksThese systems are based on 200mm pipe centres with a 0m connection length. For the full list of materials contained in these packs please contact the underfloor heating team.

Pack Size

16mm PEXLINE Pipe 16mm PEX-AL-PEX Pipe



15m² £607.06 £626.60 £665.29 £680.92 £616.06 £635.60 £674.29 £689.92

20m² £629.39 £648.93 £687.62 £703.25 £641.37 £660.91 £699.60 £715.23

30m² £724.76 £744.30 £782.99 £798.62 £742.76 £762.30 £800.99 £816.62

40m² £779.49 £799.03 £837.72 £853.33 £803.45 £822.99 £861.68 £877.31

45m² £824.15 £843.69 £882.38 £898.01 £851.15 £870.69 £909.38 £925.01

60m² £915.32 £934.86 £973.55 £989.18 £951.26 £970.80 £1,009.49 £1,025.12

80m² £1,049.81 £1,069.35 £1,108.04 £1,123.67 £1,097.73 £1,117.27 £1,155.96 £1,171.59

100m² £1,170.82 £1,190.36 £1,229.05 £1,244.68 £1,230.72 £1,250.26 £1,288.95 £1,304.58

Pack Size




15m² £643.36 £662.90 £701.59 £717.22 £652.36 £671.90 £710.59 £726.22

20m² £677.79 £697.33 £736.02 £751.06 £689.77 £709.31 £748.00 £763.63

30m² £831.95 £851.49 £890.18 £905.81 £855.91 £875.45 £914.14 £929.77

40m² £856.15 £875.69 £914.38 £930.01 £880.11 £899.65 £938.34 £953.97

45m² £979.90 £999.44 £1,038.13 £1,053.76 £1,015.84 £1,035.38 £1,074.07 £1,089.70

60m² £1,030.31 £1,049.85 £1,088.54 £1,104.17 £1,066.25 £1,085.79 £1,124.48 £1,140.11

80m² £1,213.20 £1,232.74 £1,271.43 £1,287.06 £1,261.12 £1,280.66 £1,319.35 £1,334.98

100m² £1,372.54 £1,392.08 £1,430.77 £1,446.40 £1,432.44 £1,451.98 £1,490.67 £1,506.30

61

Room Packs

Rapid Clip Plate Room PacksThese systems are based on 200mm pipe centres with a 0m connection length. For the full list of materials contained in these packs please contact the underfloor heating team.

Pack Size




15m² £729.29 £748.83 £787.52 £803.15 £738.29 £757.83 £796.52 £812.15

20m² £795.72 £815.26 £853.95 £869.58 £807.70 £827.24 £865.93 £881.56

30m² £969.22 £988.76 £1,027.45 £1,043.08 £987.22 £1,006.76 £1,045.45 £1,061.08

40m² £1,102.08 £1,121.62 £1,160.31 £1,175.94 £1,126.04 £1,145.58 £1,184.27 £1,199.90

45m² £1,190.84 £1,210.38 £1,249.07 £1,264.70 £1,217.84 £1,237.38 £1,276.07 £1,291.70

60m² £1,404.24 £1,423.78 £1,462.47 £1,478.10 £1,440.18 £1,459.72 £1,498.41 £1,514.04

80m² £1,705.06 £1,725.60 £1,763.29 £1,778.92 £1,752.98 £1,772.52 £1,811.21 £1,826.84

100m² £1,992.40 £2,011.94 £2,050.63 £2,066.26 £2,052.30 £2,071.84 £2,110.53 £2,126.16

62

Room Packs

Why Not Upgrade Your Single Room Pack to Multi-Zone?Slimline Actuators

2 3 4 5 6 7 8 9 10 11 12

The

rmos

tats

2 +£174.94 +£190.99 +£207.04 +£223.09 +£239.14 +£255.19 +£271.24 +£287.29 +£303.34 +£319.39 +£335.44

3 - +£257.70 +£273.75 +£289.80 +£305.85 +£321.90 +£337.95 +£354.00 +£370.05 +£386.10 +£402.15

4 - - +£340.46 +£356.51 +£372.56 +£388.61 +£404.66 +£420.71 +£436.76 +£452.81 +£468.86

5 - - - +£440.46 +£456.51 +£472.56 +£488.61 +£504.66 +£520.71 +£536.76 +£552.81

6 - - - - +£523.22 +£539.27 +£555.32 +£571.37 +£587.42 +£603.47 +£619.52

7 - - - - - +£605.98 +£622.03 +£638.08 +£654.13 +£670.18 +£686.23

8 - - - - - - +£688.74 +£704.79 +£720.84 +£736.89 +£752.94

NeoStat Actuators

2 3 4 5 6 7 8 9 10 11 12

The

rmos

tats

2 +£194.48 +£210.53 +£226.58 +£242.63 +£258.68 +£274.73 +£290.78 +£306.83 +£322.88 +£338.93 +£354.98

3 - +£296.78 +£312.83 +£328.88 +£344.93 +£360.98 +£377.03 +£393.08 +£409.13 +£425.18 +£441.23

4 - - +£399.08 +£415.13 +£431.18 +£447.23 +£463.28 +£479.33 +£495.38 +£511.43 +£527.48

5 - - - +£518.62 +£534.67 +£550.72 +£566.77 +£582.82 +£598.87 +£614.92 +£630.97

6 - - - - +£620.92 +£636.97 +£653.02 +£669.07 +£685.12 +£701.17 +£717.22

7 - - - - - +£723.22 +£739.27 +£755.32 +£771.37 +£787.42 +£803.47

8 - - - - - - +£825.52 +£841.57 +£857.62 +£873.67 +£889.72

Slimline-RF Actuators

2 3 4 5 6 7 8 9 10 11 12

The

rmos

tats

2 +£261.47 +£277.52 +£293.57 +£309.62 +£325.67 +£341.72 +£357.77 +£373.82 +£389.87 +£405.92 +£421.97

3 - +£348.14 +£364.19 +£380.24 +£396.29 +£412.34 +£428.39 +£444.44 +£460.49 +£476.54 +£492.59

4 - - +£434.81 +£450.86 +£466.91 +£482.96 +£499.01 +£515.06 +£531.11 +£547.16 +£563.21

5 - - - +£521.48 +£537.53 +£553.58 +£569.63 +£585.68 +£601.73 +£617.78 +£633.83

6 - - - - +£608.15 +£624.20 +£640.25 +£656.30 +£672.35 +£688.40 +£704.45

7 - - - - - +£694.82 +£710.87 +£726.92 +£742.97 +£759.02 +£775.07

8 - - - - - - +£781.49 +£797.54 +£813.59 +£829.64 +£845.69

NeoAir Actuators

2 3 4 5 6 7 8 9 10 11 12

The

rmos

tats

2 +£277.10 +£293.15 +£309.20 +£325.25 +£341.30 +£357.35 +£373.40 +£389.45 +£405.50 +£421.55 +£437.60

3 - +£379.40 +£395.45 +£411.50 +£427.55 +£443.60 +£459.65 +£475.70 +£491.75 +£507.80 +£523.85

4 - - +£481.70 +£497.75 +£513.80 +£529.85 +£545.90 +£561.95 +£578.00 +£594.05 +£610.10

5 - - - +£584.00 +£600.05 +£616.10 +£632.15 +£648.20 +£664.25 +£680.30 +£696.35

6 - - - - +£686.30 +£702.35 +£718.40 +£734.45 +£750.50 +£766.55 +£782.60

7 - - - - - +£788.60 +£804.65 +£820.70 +£836.75 +£852.80 +£868.85

8 - - - - - - +£890.90 +£906.95 +£923.00 +£939.05 +£955.10

63

Notes

........................................................................................................................................

........................................................................................................................................

........................................................................................................................................

........................................................................................................................................

........................................................................................................................................

........................................................................................................................................

........................................................................................................................................

........................................................................................................................................

........................................................................................................................................

........................................................................................................................................

........................................................................................................................................

........................................................................................................................................

........................................................................................................................................

........................................................................................................................................

........................................................................................................................................

........................................................................................................................................

........................................................................................................................................

........................................................................................................................................

........................................................................................................................................

........................................................................................................................................

........................................................................................................................................

........................................................................................................................................

64

Energy Arena Units 3-5 Charnley Fold Industrial Estate Bamber Bridge Preston Lancashire PR5 6PS

Tel: 01772 312 847 Fax: 01772 335 277 Email: [email protected]

www.solfex.co.uk

Underfloor Heating - solfex.co.uk · Underfloor heating can be installed within a variety of...

Documents

Transcript of Underfloor Heating - solfex.co.uk · Underfloor heating can be installed within a variety of...