UNCONTROLLED DOCUMENT · FLAT BASHER TC0234g 7. Orient the two (2) lower hinges as shown. Align the...

13
UNCONTROLLED DOCUMENT

Transcript of UNCONTROLLED DOCUMENT · FLAT BASHER TC0234g 7. Orient the two (2) lower hinges as shown. Align the...

Page 1: UNCONTROLLED DOCUMENT · FLAT BASHER TC0234g 7. Orient the two (2) lower hinges as shown. Align the holes in the hinge lower With the slots in the header rail. Secure With (2) M6x20

U

NCONTROLLED

DOCUMENT

Page 2: UNCONTROLLED DOCUMENT · FLAT BASHER TC0234g 7. Orient the two (2) lower hinges as shown. Align the holes in the hinge lower With the slots in the header rail. Secure With (2) M6x20

U

NCONTROLLED

DOCUMENT

Page 3: UNCONTROLLED DOCUMENT · FLAT BASHER TC0234g 7. Orient the two (2) lower hinges as shown. Align the holes in the hinge lower With the slots in the header rail. Secure With (2) M6x20

U

NCONTROLLED

DOCUMENT

Page 4: UNCONTROLLED DOCUMENT · FLAT BASHER TC0234g 7. Orient the two (2) lower hinges as shown. Align the holes in the hinge lower With the slots in the header rail. Secure With (2) M6x20

U

NCONTROLLED

DOCUMENT

Page 5: UNCONTROLLED DOCUMENT · FLAT BASHER TC0234g 7. Orient the two (2) lower hinges as shown. Align the holes in the hinge lower With the slots in the header rail. Secure With (2) M6x20

U

NCONTROLLED

DOCUMENT

Page 6: UNCONTROLLED DOCUMENT · FLAT BASHER TC0234g 7. Orient the two (2) lower hinges as shown. Align the holes in the hinge lower With the slots in the header rail. Secure With (2) M6x20

U

NCONTROLLED

DOCUMENT

Page 7: UNCONTROLLED DOCUMENT · FLAT BASHER TC0234g 7. Orient the two (2) lower hinges as shown. Align the holes in the hinge lower With the slots in the header rail. Secure With (2) M6x20

U

NCONTROLLED

DOCUMENT

Page 8: UNCONTROLLED DOCUMENT · FLAT BASHER TC0234g 7. Orient the two (2) lower hinges as shown. Align the holes in the hinge lower With the slots in the header rail. Secure With (2) M6x20

U

NCONTROLLED

DOCUMENT

Page 9: UNCONTROLLED DOCUMENT · FLAT BASHER TC0234g 7. Orient the two (2) lower hinges as shown. Align the holes in the hinge lower With the slots in the header rail. Secure With (2) M6x20

U

NCONTROLLED

DOCUMENT

Page 10: UNCONTROLLED DOCUMENT · FLAT BASHER TC0234g 7. Orient the two (2) lower hinges as shown. Align the holes in the hinge lower With the slots in the header rail. Secure With (2) M6x20

U

NCONTROLLED

DOCUMENT

Page 11: UNCONTROLLED DOCUMENT · FLAT BASHER TC0234g 7. Orient the two (2) lower hinges as shown. Align the holes in the hinge lower With the slots in the header rail. Secure With (2) M6x20

U

NCONTROLLED

DOCUMENT

Page 12: UNCONTROLLED DOCUMENT · FLAT BASHER TC0234g 7. Orient the two (2) lower hinges as shown. Align the holes in the hinge lower With the slots in the header rail. Secure With (2) M6x20

U

NCONTROLLED

DOCUMENT

Page 13: UNCONTROLLED DOCUMENT · FLAT BASHER TC0234g 7. Orient the two (2) lower hinges as shown. Align the holes in the hinge lower With the slots in the header rail. Secure With (2) M6x20

U

NCONTROLLED

DOCUMENT